Tue, 10/01/2013 - 10:32

SEMA News—October 2013

INDUSTRY NEWS

SEMA SPY PHOTOS

Photos copyright KGP Photography. Reuse or reproduction without the copyright holder’s consent is prohibited.

’15 Hyundai Genesis  Ford Mustang

’15 Hyundai Genesis

Latest Details: Prototypes for the ’15 Hyundai Genesis recently dropped the heavy fabric camouflage for hot-weather testing in the southwestern United States. Reports have surfaced that the new Genesis may offer all-wheel drive (AWD) in addition to its rear-wheel drive, and these photos appear to confirm the reports. KGP reported that one of the prototypes was spitting some serious gravel with the front wheels, suggesting that the front wheels are powered by a new AWD system. The quad oval-tip treatment seen has been spotted on prior prototypes. While it could be simply a styling revision, it may signify a new engine option.

 

 

Ford Raptor  Ford Raptor

Ford Raptor

Latest Details: This Raptor sports a new dual rear-exhaust setup and a collection of matte front and rear fenders as well as a matte-black hood. Blue-topped Fox Racing shock absorbers can be seen above the tires within the rear wheelwells, confirming that Raptor-spec goods truly reside underneath. The current Raptor has side-exit exhaust tips behind the passenger-side rear wheel. The dual exhaust clearly exits straight out the back, with tips at each corner on the rear bumper. A new exhaust may signal a special-edition Raptor. Perhaps this test truck points to a “farewell” to the Raptor variant to be sold alongside the new ’15 F-150.

 

 

GMC 2500 HD GMC 2500 HD

GMC 2500 HD

Latest Details: The camouflage that previously covered GM’s HD pickup prototypes is now gone in favor of graphic camouflage, except the front fascia. KGP grabbed shots of a GMC 2500 HD, GMC HD Denali, Chevrolet Silverado 2500 and 3500 HD Dualie—all crew cab. The standard grille on the Sierra 2500 will have a three-slot design, differentiating it from the unveiled Sierra 1500s. The Sierra HDs will maintain the single light cluster found on the 1500s. The GMC HD Denali chrome mesh grille is massive, and the chrome is carried through to the front and rear bumpers, door handles and chrome running boards.

 

 

2014 Camaro ZL1 and SS  2014 Camaro ZL1 and SS

2014 Camaro ZL1 and SS

Latest Details: Here are some of KGP Photography’s first looks at the ’14 Camaro convertible in both ZL1 and SS trims. While the revamped Camaro has been a known quantity for a while now, the soft tops have not been seen in these trim combinations before. On the ZL1, there’s a combination of the old-style ZL1 nose mated with the Camaro’s redesigned rear. The soft-top SS was kitted out with quad exhaust and 20-in., five-spoke wheels. The revamped Camaro is expected to hit showrooms early this fall.

Tue, 10/01/2013 - 10:32

SEMA News—October 2013

INDUSTRY NEWS

SEMA SPY PHOTOS

Photos copyright KGP Photography. Reuse or reproduction without the copyright holder’s consent is prohibited.

’15 Hyundai Genesis  Ford Mustang

’15 Hyundai Genesis

Latest Details: Prototypes for the ’15 Hyundai Genesis recently dropped the heavy fabric camouflage for hot-weather testing in the southwestern United States. Reports have surfaced that the new Genesis may offer all-wheel drive (AWD) in addition to its rear-wheel drive, and these photos appear to confirm the reports. KGP reported that one of the prototypes was spitting some serious gravel with the front wheels, suggesting that the front wheels are powered by a new AWD system. The quad oval-tip treatment seen has been spotted on prior prototypes. While it could be simply a styling revision, it may signify a new engine option.

 

 

Ford Raptor  Ford Raptor

Ford Raptor

Latest Details: This Raptor sports a new dual rear-exhaust setup and a collection of matte front and rear fenders as well as a matte-black hood. Blue-topped Fox Racing shock absorbers can be seen above the tires within the rear wheelwells, confirming that Raptor-spec goods truly reside underneath. The current Raptor has side-exit exhaust tips behind the passenger-side rear wheel. The dual exhaust clearly exits straight out the back, with tips at each corner on the rear bumper. A new exhaust may signal a special-edition Raptor. Perhaps this test truck points to a “farewell” to the Raptor variant to be sold alongside the new ’15 F-150.

 

 

GMC 2500 HD GMC 2500 HD

GMC 2500 HD

Latest Details: The camouflage that previously covered GM’s HD pickup prototypes is now gone in favor of graphic camouflage, except the front fascia. KGP grabbed shots of a GMC 2500 HD, GMC HD Denali, Chevrolet Silverado 2500 and 3500 HD Dualie—all crew cab. The standard grille on the Sierra 2500 will have a three-slot design, differentiating it from the unveiled Sierra 1500s. The Sierra HDs will maintain the single light cluster found on the 1500s. The GMC HD Denali chrome mesh grille is massive, and the chrome is carried through to the front and rear bumpers, door handles and chrome running boards.

 

 

2014 Camaro ZL1 and SS  2014 Camaro ZL1 and SS

2014 Camaro ZL1 and SS

Latest Details: Here are some of KGP Photography’s first looks at the ’14 Camaro convertible in both ZL1 and SS trims. While the revamped Camaro has been a known quantity for a while now, the soft tops have not been seen in these trim combinations before. On the ZL1, there’s a combination of the old-style ZL1 nose mated with the Camaro’s redesigned rear. The soft-top SS was kitted out with quad exhaust and 20-in., five-spoke wheels. The revamped Camaro is expected to hit showrooms early this fall.

Tue, 10/01/2013 - 10:32

SEMA News—October 2013

INDUSTRY NEWS

SEMA SPY PHOTOS

Photos copyright KGP Photography. Reuse or reproduction without the copyright holder’s consent is prohibited.

’15 Hyundai Genesis  Ford Mustang

’15 Hyundai Genesis

Latest Details: Prototypes for the ’15 Hyundai Genesis recently dropped the heavy fabric camouflage for hot-weather testing in the southwestern United States. Reports have surfaced that the new Genesis may offer all-wheel drive (AWD) in addition to its rear-wheel drive, and these photos appear to confirm the reports. KGP reported that one of the prototypes was spitting some serious gravel with the front wheels, suggesting that the front wheels are powered by a new AWD system. The quad oval-tip treatment seen has been spotted on prior prototypes. While it could be simply a styling revision, it may signify a new engine option.

 

 

Ford Raptor  Ford Raptor

Ford Raptor

Latest Details: This Raptor sports a new dual rear-exhaust setup and a collection of matte front and rear fenders as well as a matte-black hood. Blue-topped Fox Racing shock absorbers can be seen above the tires within the rear wheelwells, confirming that Raptor-spec goods truly reside underneath. The current Raptor has side-exit exhaust tips behind the passenger-side rear wheel. The dual exhaust clearly exits straight out the back, with tips at each corner on the rear bumper. A new exhaust may signal a special-edition Raptor. Perhaps this test truck points to a “farewell” to the Raptor variant to be sold alongside the new ’15 F-150.

 

 

GMC 2500 HD GMC 2500 HD

GMC 2500 HD

Latest Details: The camouflage that previously covered GM’s HD pickup prototypes is now gone in favor of graphic camouflage, except the front fascia. KGP grabbed shots of a GMC 2500 HD, GMC HD Denali, Chevrolet Silverado 2500 and 3500 HD Dualie—all crew cab. The standard grille on the Sierra 2500 will have a three-slot design, differentiating it from the unveiled Sierra 1500s. The Sierra HDs will maintain the single light cluster found on the 1500s. The GMC HD Denali chrome mesh grille is massive, and the chrome is carried through to the front and rear bumpers, door handles and chrome running boards.

 

 

2014 Camaro ZL1 and SS  2014 Camaro ZL1 and SS

2014 Camaro ZL1 and SS

Latest Details: Here are some of KGP Photography’s first looks at the ’14 Camaro convertible in both ZL1 and SS trims. While the revamped Camaro has been a known quantity for a while now, the soft tops have not been seen in these trim combinations before. On the ZL1, there’s a combination of the old-style ZL1 nose mated with the Camaro’s redesigned rear. The soft-top SS was kitted out with quad exhaust and 20-in., five-spoke wheels. The revamped Camaro is expected to hit showrooms early this fall.

Tue, 10/01/2013 - 10:24

SEMA Member News—September/October 2013

INDUSTRY NEWS

Chip Foose and WD-40 Co. Partner to Design Ford F-150 for Charity

 

Chip Foose created a rendering of the WD-40/SEMA Cares Foose Ford F-150 at the SEMA Garage-Industry Innovations Center.
Chip Foose created a rendering of the WD-40/SEMA Cares Foose Ford F-150 at the SEMA Garage-Industry Innovations Center. 

  
Chip Foose and WD-40 Co. are teaming up again, this time to design a custom off-road truck that will be the first vehicle built inside the new, state-of-the-art SEMA Garage-Industry Innovations Center.

Foose Design and WD-40 Co.—through a partnership with the Alex Xydias Center for Automotive Arts—will have leading SEMA manufacturers working alongside underprivileged teens and young adults to install parts and equipment on the Foose-inspired vehicle, dubbed the WD-40/SEMA Cares Foose Ford F-150. All work for the build program will be done at the recently opened SEMA Garage-Industry Innovations Center in Diamond Bar, California—a facility that allows SEMA-member companies to test and prototype parts, try its 3D modeling and printing and use its full-scale photo studio, among other things.

Instead of being auctioned like previous WD-40/SEMA Cares vehicles, the enhanced ’13 Ford F-150 Lariat will be raffled off to one lucky winner in the spring of 2014, with all of the proceeds going to three SEMA Cares charities. With raffle tickets costing only $50 starting November 1, 2013, owning a Foose-inspired truck is now more accessible than ever to all automotive enthusiasts. Proceeds from the raffled vehicle will benefit the SEMA Memorial Scholarship Fund, Childhelp and Victory Junction.

This is the sixth vehicle WD-40 Co. and SEMA Cares have teamed up to build and the fourth vehicle Chip Foose has designed with them. To date, WD-40/SEMA Cares vehicles have raised more than $575,000 for SEMA Cares charities.

Tue, 10/01/2013 - 10:24

SEMA Member News—September/October 2013

INDUSTRY NEWS

Chip Foose and WD-40 Co. Partner to Design Ford F-150 for Charity

 

Chip Foose created a rendering of the WD-40/SEMA Cares Foose Ford F-150 at the SEMA Garage-Industry Innovations Center.
Chip Foose created a rendering of the WD-40/SEMA Cares Foose Ford F-150 at the SEMA Garage-Industry Innovations Center. 

  
Chip Foose and WD-40 Co. are teaming up again, this time to design a custom off-road truck that will be the first vehicle built inside the new, state-of-the-art SEMA Garage-Industry Innovations Center.

Foose Design and WD-40 Co.—through a partnership with the Alex Xydias Center for Automotive Arts—will have leading SEMA manufacturers working alongside underprivileged teens and young adults to install parts and equipment on the Foose-inspired vehicle, dubbed the WD-40/SEMA Cares Foose Ford F-150. All work for the build program will be done at the recently opened SEMA Garage-Industry Innovations Center in Diamond Bar, California—a facility that allows SEMA-member companies to test and prototype parts, try its 3D modeling and printing and use its full-scale photo studio, among other things.

Instead of being auctioned like previous WD-40/SEMA Cares vehicles, the enhanced ’13 Ford F-150 Lariat will be raffled off to one lucky winner in the spring of 2014, with all of the proceeds going to three SEMA Cares charities. With raffle tickets costing only $50 starting November 1, 2013, owning a Foose-inspired truck is now more accessible than ever to all automotive enthusiasts. Proceeds from the raffled vehicle will benefit the SEMA Memorial Scholarship Fund, Childhelp and Victory Junction.

This is the sixth vehicle WD-40 Co. and SEMA Cares have teamed up to build and the fourth vehicle Chip Foose has designed with them. To date, WD-40/SEMA Cares vehicles have raised more than $575,000 for SEMA Cares charities.

Tue, 10/01/2013 - 10:24

SEMA Member News—September/October 2013

INDUSTRY NEWS

Chip Foose and WD-40 Co. Partner to Design Ford F-150 for Charity

 

Chip Foose created a rendering of the WD-40/SEMA Cares Foose Ford F-150 at the SEMA Garage-Industry Innovations Center.
Chip Foose created a rendering of the WD-40/SEMA Cares Foose Ford F-150 at the SEMA Garage-Industry Innovations Center. 

  
Chip Foose and WD-40 Co. are teaming up again, this time to design a custom off-road truck that will be the first vehicle built inside the new, state-of-the-art SEMA Garage-Industry Innovations Center.

Foose Design and WD-40 Co.—through a partnership with the Alex Xydias Center for Automotive Arts—will have leading SEMA manufacturers working alongside underprivileged teens and young adults to install parts and equipment on the Foose-inspired vehicle, dubbed the WD-40/SEMA Cares Foose Ford F-150. All work for the build program will be done at the recently opened SEMA Garage-Industry Innovations Center in Diamond Bar, California—a facility that allows SEMA-member companies to test and prototype parts, try its 3D modeling and printing and use its full-scale photo studio, among other things.

Instead of being auctioned like previous WD-40/SEMA Cares vehicles, the enhanced ’13 Ford F-150 Lariat will be raffled off to one lucky winner in the spring of 2014, with all of the proceeds going to three SEMA Cares charities. With raffle tickets costing only $50 starting November 1, 2013, owning a Foose-inspired truck is now more accessible than ever to all automotive enthusiasts. Proceeds from the raffled vehicle will benefit the SEMA Memorial Scholarship Fund, Childhelp and Victory Junction.

This is the sixth vehicle WD-40 Co. and SEMA Cares have teamed up to build and the fourth vehicle Chip Foose has designed with them. To date, WD-40/SEMA Cares vehicles have raised more than $575,000 for SEMA Cares charities.

Tue, 10/01/2013 - 10:24

SEMA Member News—September/October 2013

INDUSTRY NEWS

Chip Foose and WD-40 Co. Partner to Design Ford F-150 for Charity

 

Chip Foose created a rendering of the WD-40/SEMA Cares Foose Ford F-150 at the SEMA Garage-Industry Innovations Center.
Chip Foose created a rendering of the WD-40/SEMA Cares Foose Ford F-150 at the SEMA Garage-Industry Innovations Center. 

  
Chip Foose and WD-40 Co. are teaming up again, this time to design a custom off-road truck that will be the first vehicle built inside the new, state-of-the-art SEMA Garage-Industry Innovations Center.

Foose Design and WD-40 Co.—through a partnership with the Alex Xydias Center for Automotive Arts—will have leading SEMA manufacturers working alongside underprivileged teens and young adults to install parts and equipment on the Foose-inspired vehicle, dubbed the WD-40/SEMA Cares Foose Ford F-150. All work for the build program will be done at the recently opened SEMA Garage-Industry Innovations Center in Diamond Bar, California—a facility that allows SEMA-member companies to test and prototype parts, try its 3D modeling and printing and use its full-scale photo studio, among other things.

Instead of being auctioned like previous WD-40/SEMA Cares vehicles, the enhanced ’13 Ford F-150 Lariat will be raffled off to one lucky winner in the spring of 2014, with all of the proceeds going to three SEMA Cares charities. With raffle tickets costing only $50 starting November 1, 2013, owning a Foose-inspired truck is now more accessible than ever to all automotive enthusiasts. Proceeds from the raffled vehicle will benefit the SEMA Memorial Scholarship Fund, Childhelp and Victory Junction.

This is the sixth vehicle WD-40 Co. and SEMA Cares have teamed up to build and the fourth vehicle Chip Foose has designed with them. To date, WD-40/SEMA Cares vehicles have raised more than $575,000 for SEMA Cares charities.

Tue, 10/01/2013 - 10:24

SEMA Member News—September/October 2013

INDUSTRY NEWS

Chip Foose and WD-40 Co. Partner to Design Ford F-150 for Charity

 

Chip Foose created a rendering of the WD-40/SEMA Cares Foose Ford F-150 at the SEMA Garage-Industry Innovations Center.
Chip Foose created a rendering of the WD-40/SEMA Cares Foose Ford F-150 at the SEMA Garage-Industry Innovations Center. 

  
Chip Foose and WD-40 Co. are teaming up again, this time to design a custom off-road truck that will be the first vehicle built inside the new, state-of-the-art SEMA Garage-Industry Innovations Center.

Foose Design and WD-40 Co.—through a partnership with the Alex Xydias Center for Automotive Arts—will have leading SEMA manufacturers working alongside underprivileged teens and young adults to install parts and equipment on the Foose-inspired vehicle, dubbed the WD-40/SEMA Cares Foose Ford F-150. All work for the build program will be done at the recently opened SEMA Garage-Industry Innovations Center in Diamond Bar, California—a facility that allows SEMA-member companies to test and prototype parts, try its 3D modeling and printing and use its full-scale photo studio, among other things.

Instead of being auctioned like previous WD-40/SEMA Cares vehicles, the enhanced ’13 Ford F-150 Lariat will be raffled off to one lucky winner in the spring of 2014, with all of the proceeds going to three SEMA Cares charities. With raffle tickets costing only $50 starting November 1, 2013, owning a Foose-inspired truck is now more accessible than ever to all automotive enthusiasts. Proceeds from the raffled vehicle will benefit the SEMA Memorial Scholarship Fund, Childhelp and Victory Junction.

This is the sixth vehicle WD-40 Co. and SEMA Cares have teamed up to build and the fourth vehicle Chip Foose has designed with them. To date, WD-40/SEMA Cares vehicles have raised more than $575,000 for SEMA Cares charities.

Tue, 10/01/2013 - 10:14

SEMA News—October 2013

HERITAGE
By Drew Hardin
Photo Courtesy Petersen Archives

Bonneville Giants

On October 2, 1964, Walt Arfons’ Wingfoot Express, with Tom Green at the wheel, earned a place in land-speed racing history by setting a new record of 413.20 mph, besting the previous 407.45 mark set the previous year by Craig Breedlove.On October 2, 1964, Walt Arfons’ Wingfoot Express, with Tom Green at the wheel, earned a place in land-speed racing history by setting a new record of 413.20 mph, besting the previous 407.45 mark set the previous year by Craig Breedlove.

Turned out Walt’s record would be short-lived. His half-brother, Art Arfons, set a 434.02-mph mark just three days later in his Green Monster. Breedlove eclipsed that mark with a 526.28-mph average before famously running his Spirit of America into a water-filled ditch, only to have Art come back and top that, running the Monster to a 536.71-mph average.

Bonneville was a busy place in October of 1964.

Walt, who passed away in June at age 96, never experienced the same level of success as his brother, even though he is credited with pioneering the use of jet engines on dragsters. Walt’s first jet car, which used a Navy-surplus Westinghouse engine, was built in 1960. It carried another of Walt’s innovations: drogue parachutes to slow the car.

Walt’s first land-speed record attempt in the Wingfoot Express—its name a tribute to sponsor Goodyear Tire’s company logo—was at Bonneville in the summer of 1963.

“The trial runs proved unsatisfactory,” wrote Dick Wells in the January 1966 issue of Hot Rod magazine, as “the engine gulped through its intake a snoutful of salt.” Walt brought the Wingfoot Express back to Bonneville in September 1964 (when Hot Rod photographer Eric Rickman snapped this photo for the January 1965 issue) and had to sort out some power-delivery issues before making the record runs in early October.

Wells’ 1966 Hot Rod story was a roundup of the various teams making jet-powered and wheel-driven assaults on speed records at Bonneville in 1965. Walt returned that year with an all-new Wingfoot—this one a needle-nosed, dart-shaped racer. He again proved to be an innovator, exchanging the previous year’s jet propulsion system for a series of jet-assisted takeoff (JATO) rockets.

The rocket-powered Wingfoot showed early promise, with shakedown runs clocked at over 400 mph. But technical gremlins kept the car from ever fully delivering on its potential, even after 10 additional JATO rockets were mounted to augment the original 15.

During what was to be the Wingfoot Express’s final run in 1965, driver Bob Tatroe was traveling at more than 400 mph when the car’s retro-rocket system—which was supposed to brake the car in an emergency—went off unintentionally.

“The retros accidentally went into action, forcing a reverse thrust and causing a fire,” Wells wrote. “As Tatroe and the Express streaked across the salt, behind was a trail of flames from the burning tail of the car, along with the rockets blazing their power.
It was a spectacular show, but a frustrating climax to Walt Arfons’ attempt at the land-speed racing record.”


 

Tue, 10/01/2013 - 10:14

SEMA News—October 2013

HERITAGE
By Drew Hardin
Photo Courtesy Petersen Archives

Bonneville Giants

On October 2, 1964, Walt Arfons’ Wingfoot Express, with Tom Green at the wheel, earned a place in land-speed racing history by setting a new record of 413.20 mph, besting the previous 407.45 mark set the previous year by Craig Breedlove.On October 2, 1964, Walt Arfons’ Wingfoot Express, with Tom Green at the wheel, earned a place in land-speed racing history by setting a new record of 413.20 mph, besting the previous 407.45 mark set the previous year by Craig Breedlove.

Turned out Walt’s record would be short-lived. His half-brother, Art Arfons, set a 434.02-mph mark just three days later in his Green Monster. Breedlove eclipsed that mark with a 526.28-mph average before famously running his Spirit of America into a water-filled ditch, only to have Art come back and top that, running the Monster to a 536.71-mph average.

Bonneville was a busy place in October of 1964.

Walt, who passed away in June at age 96, never experienced the same level of success as his brother, even though he is credited with pioneering the use of jet engines on dragsters. Walt’s first jet car, which used a Navy-surplus Westinghouse engine, was built in 1960. It carried another of Walt’s innovations: drogue parachutes to slow the car.

Walt’s first land-speed record attempt in the Wingfoot Express—its name a tribute to sponsor Goodyear Tire’s company logo—was at Bonneville in the summer of 1963.

“The trial runs proved unsatisfactory,” wrote Dick Wells in the January 1966 issue of Hot Rod magazine, as “the engine gulped through its intake a snoutful of salt.” Walt brought the Wingfoot Express back to Bonneville in September 1964 (when Hot Rod photographer Eric Rickman snapped this photo for the January 1965 issue) and had to sort out some power-delivery issues before making the record runs in early October.

Wells’ 1966 Hot Rod story was a roundup of the various teams making jet-powered and wheel-driven assaults on speed records at Bonneville in 1965. Walt returned that year with an all-new Wingfoot—this one a needle-nosed, dart-shaped racer. He again proved to be an innovator, exchanging the previous year’s jet propulsion system for a series of jet-assisted takeoff (JATO) rockets.

The rocket-powered Wingfoot showed early promise, with shakedown runs clocked at over 400 mph. But technical gremlins kept the car from ever fully delivering on its potential, even after 10 additional JATO rockets were mounted to augment the original 15.

During what was to be the Wingfoot Express’s final run in 1965, driver Bob Tatroe was traveling at more than 400 mph when the car’s retro-rocket system—which was supposed to brake the car in an emergency—went off unintentionally.

“The retros accidentally went into action, forcing a reverse thrust and causing a fire,” Wells wrote. “As Tatroe and the Express streaked across the salt, behind was a trail of flames from the burning tail of the car, along with the rockets blazing their power.
It was a spectacular show, but a frustrating climax to Walt Arfons’ attempt at the land-speed racing record.”