By SEMA Washington, D.C., Staff

The U.S. Department of Labor (DOL) has issued a proposed rule to encourage companies, trade associations, colleges, unions and other entities to establish federally-recognized apprenticeship programs. The apprenticeships would be paid positions that provide trainees with on-the-job training and classroom education.  The initiative is intended to expand the pool of available workers given the fact that the U.S. currently has many more job openings than skilled workers.

In 2017, President Trump issued an Executive Order directing the DOL to institute such a program.  The DOL will attempt to reduce red tape and overly rigid requirements for administering apprenticeship programs.  Millions of dollars in federal funds will also be available to help partner educational institutions with companies.  The proposal is intended to encourage a market-based approach while operating within DOL standards for training, structure, and curricula.

For more information, contact Stuart Gosswein at stuartg@sema.org.

By SEMA Washington, D.C., Staff

The U.S. Department of Labor (DOL) has issued a proposed rule to encourage companies, trade associations, colleges, unions and other entities to establish federally-recognized apprenticeship programs. The apprenticeships would be paid positions that provide trainees with on-the-job training and classroom education.  The initiative is intended to expand the pool of available workers given the fact that the U.S. currently has many more job openings than skilled workers.

In 2017, President Trump issued an Executive Order directing the DOL to institute such a program.  The DOL will attempt to reduce red tape and overly rigid requirements for administering apprenticeship programs.  Millions of dollars in federal funds will also be available to help partner educational institutions with companies.  The proposal is intended to encourage a market-based approach while operating within DOL standards for training, structure, and curricula.

For more information, contact Stuart Gosswein at stuartg@sema.org.

By SEMA Washington, D.C., Staff

The U.S. Senate passed Senate Resolution 271 (S. Res. 271) at the request of SEMA recognizing July 12, 2019, as Collector Car Appreciation Day (CCAD). A similar resolution was also introduced in the U.S. House of Representatives (H. Res. 108). The date marks the 10th commemoration in what has become an annual event to celebrate and raise awareness of the vital role automotive restoration and collection plays in American society.

The two resolutions were introduced by co-chairs of the SEMA-supported Congressional Automotive Performance and Motorsports Caucus. S. Res. 271 was sponsored by Senate Co-Chairs Sen. Richard Burr (R-NC) and Sen. Jon Tester (D-MT) while House Co-Chairs Rep. Bill Posey (R-FL) and Rep. Sanford D. Bishop, Jr. (D-GA) sponsored H. Res. 108. These Congressional leaders are strong advocates for the automotive hobby in Washington, D.C. The Caucus is an informal, non-partisan member organization that pays tribute to America’s ever-growing love affair with the car and motorsports.

All automotive businesses and enthusiasts are encouraged to take part in this year’s CCAD celebration by planning or participating in events in their community. The SEMA Action Network (SAN) maintains the official event list to commemorate the day, which includes car shows, cruise-ins and parades nationwide. If you or someone you know is hosting a vehicle-related gathering in July, submit the details on the SAN website if you haven't done so already! Participating organizers will be awarded a copy of the Congressional resolution for display at their registered event.

CELEBRATE THE HOBBY YOUR WAY!

• ATTEND an official vehicle-inspired event
• HOST your own gathering or club meeting
• Promote a “HOLIDAY SALE” at your business
• INVITE partnerships with nearby enthusiast-related groups
• DRIVE your special ride, new or old, whatever the destination

By SEMA Washington, D.C., Staff

The U.S. Senate passed Senate Resolution 271 (S. Res. 271) at the request of SEMA recognizing July 12, 2019, as Collector Car Appreciation Day (CCAD). A similar resolution was also introduced in the U.S. House of Representatives (H. Res. 108). The date marks the 10th commemoration in what has become an annual event to celebrate and raise awareness of the vital role automotive restoration and collection plays in American society.

The two resolutions were introduced by co-chairs of the SEMA-supported Congressional Automotive Performance and Motorsports Caucus. S. Res. 271 was sponsored by Senate Co-Chairs Sen. Richard Burr (R-NC) and Sen. Jon Tester (D-MT) while House Co-Chairs Rep. Bill Posey (R-FL) and Rep. Sanford D. Bishop, Jr. (D-GA) sponsored H. Res. 108. These Congressional leaders are strong advocates for the automotive hobby in Washington, D.C. The Caucus is an informal, non-partisan member organization that pays tribute to America’s ever-growing love affair with the car and motorsports.

All automotive businesses and enthusiasts are encouraged to take part in this year’s CCAD celebration by planning or participating in events in their community. The SEMA Action Network (SAN) maintains the official event list to commemorate the day, which includes car shows, cruise-ins and parades nationwide. If you or someone you know is hosting a vehicle-related gathering in July, submit the details on the SAN website if you haven't done so already! Participating organizers will be awarded a copy of the Congressional resolution for display at their registered event.

CELEBRATE THE HOBBY YOUR WAY!

• ATTEND an official vehicle-inspired event
• HOST your own gathering or club meeting
• Promote a “HOLIDAY SALE” at your business
• INVITE partnerships with nearby enthusiast-related groups
• DRIVE your special ride, new or old, whatever the destination

By SEMA Washington, D.C., Staff

The U.S. Senate passed Senate Resolution 271 (S. Res. 271) at the request of SEMA recognizing July 12, 2019, as Collector Car Appreciation Day (CCAD). A similar resolution was also introduced in the U.S. House of Representatives (H. Res. 108). The date marks the 10th commemoration in what has become an annual event to celebrate and raise awareness of the vital role automotive restoration and collection plays in American society.

The two resolutions were introduced by co-chairs of the SEMA-supported Congressional Automotive Performance and Motorsports Caucus. S. Res. 271 was sponsored by Senate Co-Chairs Sen. Richard Burr (R-NC) and Sen. Jon Tester (D-MT) while House Co-Chairs Rep. Bill Posey (R-FL) and Rep. Sanford D. Bishop, Jr. (D-GA) sponsored H. Res. 108. These Congressional leaders are strong advocates for the automotive hobby in Washington, D.C. The Caucus is an informal, non-partisan member organization that pays tribute to America’s ever-growing love affair with the car and motorsports.

All automotive businesses and enthusiasts are encouraged to take part in this year’s CCAD celebration by planning or participating in events in their community. The SEMA Action Network (SAN) maintains the official event list to commemorate the day, which includes car shows, cruise-ins and parades nationwide. If you or someone you know is hosting a vehicle-related gathering in July, submit the details on the SAN website if you haven't done so already! Participating organizers will be awarded a copy of the Congressional resolution for display at their registered event.

CELEBRATE THE HOBBY YOUR WAY!

• ATTEND an official vehicle-inspired event
• HOST your own gathering or club meeting
• Promote a “HOLIDAY SALE” at your business
• INVITE partnerships with nearby enthusiast-related groups
• DRIVE your special ride, new or old, whatever the destination

Nominations are being accepted for SEMA's Manufacturer of the Year, Person of the Year, Rep Agency of the Year, WD of the Year, and Gen-III Innovator of the Year.

https://www.sema.org/awards/

Nominations are being accepted for SEMA's Manufacturer of the Year, Person of the Year, Rep Agency of the Year, WD of the Year, and Gen-III Innovator of the Year.

https://www.sema.org/awards/

By Freddy Ramirez

The SEMA Data Co-op (SDC) is “data central” for hundreds of specialty parts brands, representing millions of part numbers and tens of millions of vehicle applications. Created by SEMA, the SDC is the definitive, industry-owned and -operated centralized data repository, complete with a comprehensive set of online data management tools.

The product releases below are from SEMA members who are also part of the SDC at the the Bronze, Silver, Gold or Platinum level. Learn more about the SDC at www.semadatacoop.org.

SDC members are invited to submit new-product press releases for consideration to editors@sema.org.

Heatshield Products Lava Motor Mount Shield Heatshield Products announced the release of Lava Motor Mount Shield™. The shield is designed to protect rubber, polyurethane and polygraphite motor mounts from damaging heat and chemical exposure. The shield is designed to encase the engine mounts with a Heatshield Products proprietary, specially formulated, volcanic rock-based thermal-barrier material said to be able to withstand up to 1,200 degrees Fahrenheit continuous radiated heat and 2,000 degrees Fahrenheit intermittent radiated heat. The material is engineered to resist water, caustic chemicals and acids. 844-723-2665 www.heatshieldproducts.com PN 503010
Holley Brawler Street & Race Carburetors Holley announced the release of Brawler Street and Race Carburetors. Newly available in a 600 CFM, configurations are engineered to have the latest air/fuel calibration technology for today's street/strip applications built right in with considerations for currently available fuel. The carburetors are designed to be lightweight, affordable, made of billet aluminum, anodized red and black, and deliver the performance and tuneability you'd expect from much more expensive carburetors. 866-464-6553 www.holley.com PN BR-67316
Holley LS7 Hi-Ram Lower Manifolds Holley announced the release of Hi-Ram Lower Intake Manifolds. The intake manifolds are designed to be a cost-effective alternative to fabricated sheet-metal intakes and perfect for high-performance engines where induction-system height is not a factor. The manifolds are engineered to be a base for custom induction systems and carbureted tops. The intake manifolds feature O-rings instead of gaskets on the plenum and all eight ports and are created to work with both forced-induction and naturally aspirated engines for drag race, muscle car, marine, off-road, sand rail, pulling truck, and street rod applications. 866-464-6553 www.holley.com PN 300-228BK
Flowmaster Flowfx Axle-Back Exhaust System – 2015-19 Mustang Holley announced the release of Flowmaster FlowFX Mustang Axle-Back Exhaust Systems. Designed for ‘15-‘19 Ford Mustangs with 2.3L EcoBoost and 3.7L V6 powerplants, the system features a pair of compact, round straight-through performance mufflers made of bright stainless steel and dual 4.5-in. black-ceramic-coated stainless-steel tips that are engineered to fit the factory exhaust cutouts in the rear valance. 866-464-6553 www.holley.com PN 717902
TCI 4x Four-Speed Transmission TCI announced the release of 4x Four- Speed Transmission. The transmissions are designed to be compatible with small block Ford engines using a 28oz.or 50oz. external balance. The transmission is engineered to be capable to run 550hp or 750hp. 1-888-776-9824 www.tciauto.com PN 471800P12
Mishimoto Powerstroke Oil Cooler Mishimoto announced the release of oil cooler for 2003-2007 6.0L Ford Powerstrokes and 2008-2010 Ford Powerstrokes. The oil cooler is designed to replace clogged or leaking stock oil cooler for renewed performance. The oil cooler includes high-quality FKM seals and O-rings ensure a leak-free fit. 877-466-4744 www.mishimoto.com PN MMOC-F2D-03

By Freddy Ramirez

The SEMA Data Co-op (SDC) is “data central” for hundreds of specialty parts brands, representing millions of part numbers and tens of millions of vehicle applications. Created by SEMA, the SDC is the definitive, industry-owned and -operated centralized data repository, complete with a comprehensive set of online data management tools.

The product releases below are from SEMA members who are also part of the SDC at the the Bronze, Silver, Gold or Platinum level. Learn more about the SDC at www.semadatacoop.org.

SDC members are invited to submit new-product press releases for consideration to editors@sema.org.

Heatshield Products Lava Motor Mount Shield Heatshield Products announced the release of Lava Motor Mount Shield™. The shield is designed to protect rubber, polyurethane and polygraphite motor mounts from damaging heat and chemical exposure. The shield is designed to encase the engine mounts with a Heatshield Products proprietary, specially formulated, volcanic rock-based thermal-barrier material said to be able to withstand up to 1,200 degrees Fahrenheit continuous radiated heat and 2,000 degrees Fahrenheit intermittent radiated heat. The material is engineered to resist water, caustic chemicals and acids. 844-723-2665 www.heatshieldproducts.com PN 503010
Holley Brawler Street & Race Carburetors Holley announced the release of Brawler Street and Race Carburetors. Newly available in a 600 CFM, configurations are engineered to have the latest air/fuel calibration technology for today's street/strip applications built right in with considerations for currently available fuel. The carburetors are designed to be lightweight, affordable, made of billet aluminum, anodized red and black, and deliver the performance and tuneability you'd expect from much more expensive carburetors. 866-464-6553 www.holley.com PN BR-67316
Holley LS7 Hi-Ram Lower Manifolds Holley announced the release of Hi-Ram Lower Intake Manifolds. The intake manifolds are designed to be a cost-effective alternative to fabricated sheet-metal intakes and perfect for high-performance engines where induction-system height is not a factor. The manifolds are engineered to be a base for custom induction systems and carbureted tops. The intake manifolds feature O-rings instead of gaskets on the plenum and all eight ports and are created to work with both forced-induction and naturally aspirated engines for drag race, muscle car, marine, off-road, sand rail, pulling truck, and street rod applications. 866-464-6553 www.holley.com PN 300-228BK
Flowmaster Flowfx Axle-Back Exhaust System – 2015-19 Mustang Holley announced the release of Flowmaster FlowFX Mustang Axle-Back Exhaust Systems. Designed for ‘15-‘19 Ford Mustangs with 2.3L EcoBoost and 3.7L V6 powerplants, the system features a pair of compact, round straight-through performance mufflers made of bright stainless steel and dual 4.5-in. black-ceramic-coated stainless-steel tips that are engineered to fit the factory exhaust cutouts in the rear valance. 866-464-6553 www.holley.com PN 717902
TCI 4x Four-Speed Transmission TCI announced the release of 4x Four- Speed Transmission. The transmissions are designed to be compatible with small block Ford engines using a 28oz.or 50oz. external balance. The transmission is engineered to be capable to run 550hp or 750hp. 1-888-776-9824 www.tciauto.com PN 471800P12
Mishimoto Powerstroke Oil Cooler Mishimoto announced the release of oil cooler for 2003-2007 6.0L Ford Powerstrokes and 2008-2010 Ford Powerstrokes. The oil cooler is designed to replace clogged or leaking stock oil cooler for renewed performance. The oil cooler includes high-quality FKM seals and O-rings ensure a leak-free fit. 877-466-4744 www.mishimoto.com PN MMOC-F2D-03

Three-dimension (3D) scan data for the 2019 Jeep Gladiator is available exclusively to SEMA manufacturing members.

By Della Domingo

Three-dimension (3D) scan data is now available exclusively to SEMA manufacturing members for the '20 Jeep Gladiator, the Wrangler pickup that US News & World Report ranked as one of the best new pickups of the year.

Obtained through 3-D scans while the vehicle was at the SEMA Garage, files include the cargo bed (interior and exterior), tailgate, back of cab, front suspension, rear suspension, rocker panel with rock slider, and rocker panel without rock slider.

The Jeep Gladiator hit dealerships in June and has received rave reviews from the aftermarket community and enthusiasts alike. Scott Talon, director of Jeep Brand at FCA, notes that the Gladiator is “easy to work on, easy to modify, and easy to personalize.”

Watch the video here to learn more about the Gladiator, and contact Luism@sema.org for details about the 3D files for the vehicle.