Thu, 12/01/2011 - 09:42

SEMA News—December 2011 

Law and Order
By Steve McDonald

2011: The Year in Review

The laws and regulations that govern how SEMA members do business have an increased and growing impact on the way automotive specialty-equipment products are made, distributed and marketed. As the nation and our industry struggle with a still balky economy, SEMA’s charge is to stay on top of every relevant state and federal matter of consequence to its membership to ensure the best possible outcome.

The following are just a few examples of critical legislative/regulatory issues that the SEMA government affairs office was involved in this year.

State Update

Arizona Emissions Test Exemption:

Governor Jan Brewer signed into law SEMA-supported legislation to exempt all vehicles manufactured in the ’74 model year and earlier from the state’s mandatory biennial emissions inspection program. Under previous law, only vehicles manufactured in 1966 and earlier and collectibles (used primarily for hobby activities, insured under a collector-car insurance policy and whose owners have registered an additional vehicle for general transportation) were exempt.

Arkansas Inoperable Vehicles:

SEMA helped defeat legislation that would have allowed cities to remove inoperable vehicles from private property if the vehicle was deemed a “nuisance” under a local ordinance. Among other things, the bill provided no reasonable safeguards for legitimate automotive hobbyists to work on inoperable collector vehicles on private property, even those located out of public view.

Arkansas Bonded Titles:

Governor Mike Beebe signed into law SEMA-supported legislation to create a less expensive bonded title procedure for assembled vehicles. The new procedure calculates the amount of the bond as equal to the value of the vehicle. Prior to the enactment of the new law, all vehicle owners applying for a bonded title had to post a bond of 1.5 times the value of the vehicle. The law also permits assembled vehicles to be bought and sold in inoperable condition. Arkansas defines an assembled vehicle as a vehicle constructed by a collector from parts obtained from a variety of different sources on various occasions.

California Diesel Parts:

At SEMA’s request, the California Air Resources Board (CARB) again extended its “Parts In Progress” (PIP) program until December 31, 2011. The program was originally slated to conclude on June 20 but was subsequently extended to September 30. CARB and SEMA created this procedure in order for non-certified diesel parts to not cause failure of the visual portion of the BAR’s smog check while diesel parts manufacturers submitted all traditional certification application material and addressed test requirements spelled out in the program, including a rigorous steady-state test mode. Delays created primarily by lack of available test laboratory time prompted the extensions.

Colorado Collector Vehicles:

Governor John Hickenlooper signed into law a SEMA-supported bill to reorganize and simplify the various laws dealing with collector cars. Reorganizing the statutes into one location in the code will help the Department of Revenue, law enforcement, county clerks and enthusiasts more easily locate and apply state law governing the titling and registration of collector vehicles.

Connecticut Antique Vehicles:

SEMA-opposed legislation that threatened to increase the age requirement for vehicles eligible for registration as “antique, rare or special-interest motor vehicles” died when the Connecticut Legislature adjourned for the year. The bill increased the age requirement for registration as an antique to 30 years and increased the tax assessment amount on vehicles registered as antiques to $2,500. Currently, vehicles 20 years old or older are eligible for antique status. Antique, rare or special-interest motor vehicles are currently assessed at a rate of $500, and owners pay personal property taxes on that amount.

Florida Tire Dating:

SEMA-opposed legislation to require retailers to provide information on tire aging was successfully defeated. The bill would have required tire retailers to provide a written disclosure on each replacement tire’s age, including the week and year the tire was manufactured, the length remaining on the factory warranty and a statement on tire aging explaining how tire age can contribute to crashes and that tires should be replaced every six years. The legislation would have imposed unnecessary regulatory burdens on tire retailers without providing any proof that tire age affects safety.

Hawaii Car Audio Equipment:

SEMA-opposed legislation to ban the installation, ownership or use of any car with aftermarket speakers over 6.5 in. in height or depth, any five-speaker aftermarket system, any aftermarket speaker more than 100 watts and any aftermarket speaker installed external to the passenger compartment or in an open hatch back was not considered this year. The measure was discriminatory toward aftermarket products, as it did not seek to limit systems installed by original vehicle manufacturers or dealers.

Illinois Antique Vehicles:

Governor Pat Quinn signed into law SEMA-supported legislation to provide for an expanded-use antique vehicle registration class that would allow antique vehicles and replicas to be driven without limitation during the warmer part of the year, from April 1
through October 31. Regular antique vehicle registration is still available for a lower fee to hobbyists who would prefer operating their vehicles on only a limited-use basis throughout the year.

Iowa Ethanol:

SEMA-opposed legislation in Iowa to change labeling requirements on gas pumps across the state to require labeling for only unblended gasoline and E85 was successfully defeated. Current law in Iowa requires labeling when gasoline is blended with any amount of ethanol. If the bill had been enacted, it would have removed labeling requirements for ethanol-blended gasoline containing 15% or less ethanol, thereby increasing the risk of misfueling and potential engine damage.

Maine Custom Vehicles:

Governor Paul LePage signed into law a SEMA-supported bill to include more model-year vehicles in the definition of a custom vehicle by changing the definition from 30 to 25 years old and older. The new law also expands the weight limit for custom vehicles from 6,000 to 10,000 lbs. and clarifies that custom vehicles are held to special inspection criteria promulgated by the chief of the state police.

Nebraska Ethanol:

Persuaded by the opposition of SEMA, legislation to remove labeling requirements on pumps dispensing ethanol-blended gasoline has been “indefinitely postponed” in Nebraska. Current law in Nebraska requires labeling when gasoline contains 1% or more alcohol, including labels for pumps dispensing E10. The bill would have made it impossible for enthusiasts to know whether the gasoline they put into their vehicles contained any ethanol, making unintentional misfueling and engine damage more likely.

Nebraska Parts Cars:

Governor Dave Heineman signed into law a bill to redefine parts cars and make such vehicles easier to transfer. Prior to the bill’s enactment, Nebraska required a certificate of title when transferring any vehicle. The new law, effective immediately, allows for parts cars to be transferred using a bill of sale issued by the DMV. Parts vehicles eligible to be transferred using only a bill of sale under the new provisions include vehicles for which title has been surrendered due to the vehicle being destroyed, dismantled or scrapped or for which title has been surrendered to another state or an insurance company to render it fit for sale for scrap parts.

Nevada Emissions Exemption:

Governor Brian Sandoval signed into law SEMA-supported legislation to exempt classic vehicles and classic rods from emissions inspections if owners pay a one-time $6 fee and submit a certification that their vehicles will not be driven more than 5,000 miles per year. Under previous law, classic rods and classic vehicles were subject to a 2,500-mile-per-year limit to qualify for an emissions exemption and had to pass an initial two-speed idle-emissions inspection to qualify.

New York Collector Car Appreciation Day:

At SEMA’s request, the New York State Assembly approved a resolution to memorialize July 8, 2011, as Collector Car Appreciation Day in the State of New York, in conjunction with National Collector Car Appreciation Day.

New York “Gas Guzzlers”:

Legislation to establish a progressive purchase surcharge for some new motor vehicles based on state calculations of carbon emissions was defeated for the year. Depending on the vehicle purchased, this surcharge could have required owners to pay up to $2,500 more for the vehicle.

New York Wheel Marking:

SEMA helped defeat legislation that would require vehicle identification numbers on the wheels of all motor vehicles assembled or sold in New York. All wheels sold in the United States generally comply with industry standards that include markings with the wheel manufacturer’s name, trademark or symbol, date of manufacture, manufacturer’s part number or code. Wheels are already identifiable without imposing a VIN marking burden. Both Congress and the NHTSA have determined that wheel marking of the type contemplated by this bill would impose a huge burden on the wheel makers, automakers and dealers and, as noted, wheels already have distinguishable markings. The measure may return next year.

North Carolina Ethanol:

Governor Bev Perdue signed into law SEMA-supported legislation requiring ethanol content labels on all pumps that dispense ethanol-blended gasoline. The new law requires these labels to indicate that the gasoline contains 10% or less ethanol or greater than 10% ethanol. Previously, retailers operating pumps dispensing ethanol-blended gasoline were not required to post labels regarding ethanol content.

North Dakota Vehicle Modifications:

As a result of the opposition mounted by SEMA and North Dakota vehicle hobbyists and businesses, legislation that threatened to prohibit the modification of any motor vehicle that altered the manufacturer’s original suspension, steering or brake system unless the state highway patrol issued an inspection certificate was amended to remove those restrictions. The amended bill, signed into law, now only provides for a study of the state’s transportation laws to be conducted between the 2011 and 2012 legislative sessions.

Oklahoma Rebodied Vehicles:

Governor Mary Fallin signed into law SEMA-supported legislation to provide for certificates of title to be issued for “rebodied” vehicles. Under the new law, a rebodied vehicle is defined as a vehicle that has been assembled using a new body or new major component part that must be identical to the body or major component part used on the original vehicle. The law also requires that a new body or major component part that is used to assemble a rebodied vehicle be licensed by the manufacturer of the original vehicle. Other original, new or reconditioned parts may also be used. Titles issued to rebodied vehicles will identify the year, make and model of the originally manufactured vehicle and include a notation that states: “This vehicle has been assembled with new major components licensed by the original manufacturer.” Upon application, the Oklahoma tax commissioner will assign each rebodied vehicle a new vehicle identification number.

Oklahoma Racing:

Governor Mary Fallin has signed into law legislation to allow municipalities to issue permits for sanctioned motor-vehicle racing events on public streets and highways within their geographical jurisdictions. The new law promotes legal racing in Oklahoma, boosts the state’s tourism sector and streamlines the process for race promoters to obtain a racing event permit. An
exemption from regulations governing “public or private nuisances,” including noise limits, is also provided for in the new law. To obtain a permit, the racing event must be sanctioned by a nationally or internationally recognized racing organization.

Oregon Exhaust Systems:

At the insistence of SEMA, the sponsor of legislation that would have banned the sale of certain new motor-vehicle exhaust systems withdrew the measure from further consideration. The bill would have prohibited the sale of exhaust systems and exhaust-system components that cause motor vehicles to produce noise exceeding certain limits and would have led to significant confusion regarding compliance and enforcement.

Oregon Suspension/Tire Alterations:

A SEMA-opposed bill that would have severely limited vehicle suspension, body lift and wheel/tire alterations died without committee consideration. Specifically, the measure sought to ban vehicles whose bumpers were elevated more than 3 in. over the original manufactured bumper clearance. Among other things, the bill discriminated against aftermarket parts makers by leaving it solely to the vehicle manufacturers to choose bumper heights. Additionally, it would have forced owners of modified vehicles to spend large sums of money to reinstall original components and would have banned useful alterations that provide adequate clearance for on-/off-road capability and accommodate heavy loads, larger tires, improved suspension and water-fording capability. The bill also would have imposed a fine of up to $360 per offense for vehicles that exceeded the 3-in. clearance requirement.

Tennessee Emissions Tests:

Governor Bill Haslam signed into law SEMA-supported legislation to exempt vehicles more than 25 years old from the state’s annual emissions inspection and maintenance program. To qualify for the exemption, these vehicles must be registered as “antique motor vehicles.” Previous law in Tennessee exempted only vehicles manufactured before the ’75 model year from emissions inspection. The new law provides for a rolling emissions inspection exemption that would exempt qualifying antique vehicles upon enactment and would pick up an additional model year for each year the law is in effect.

Texas Street Rods/Customs:

After an effort that stretched into two legislative sessions, SEMA-model legislation to create a vehicle registration classification for street rods and custom vehicles (including kit cars and replicas) and provide for special license plates was signed into law by Governor Rick Perry. The new law defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured after 1948. The law also allows for the use of non-original materials and creates a titling and registration criterion that assigns these vehicles the same model-year designations as the production vehicles they most closely resemble. In addition, the law holds street rods, customs and replicas to only the equipment standards specified by law during the model year listed on the title and exempts them from the state’s emissions inspection program.

Utah Vintage Vehicles:

Governor Gary Herbert signed into law SEMA-supported legislation to allow vehicles 30 years old and older to be classified as “vintage vehicles.” Under previous law, Utah reserved the “vintage vehicle” class only to vehicles 40 years old and older. Under the new law, “vintage vehicles” 30–40 years old would be charged a $45 annual registration fee. When a vehicle reaches 40 years old, the registrant would pay a one-time $40 fee. Vintage vehicles are exempted from annual emissions and safety inspections.

Washington Collector Vehicles:

Washington state Governor Christine Gregoire signed into law legislation that originally sought to increase the age requirement for vehicles eligible for registration as “collector vehicles.” Under the new law, which was amended under pressure from SEMA, vehicles seeking registration as collector vehicles and the one-time registration fee would still only be required to be at least 30 years old—not 40 years old as the original bill required. The law also deletes provisions that would have created penalties for violating the limited-use provisions. However, the measure still requires the Department of Licensing to establish a method for law enforcement to readily access collector vehicle information using the collector vehicle’s plate number, which will aid in ensuring that a plate is being used on its properly assigned vehicle.

Washington Registration Fees:

SEMA-opposed legislation to require annual renewal fees for collector vehicle and horseless carriage license plates was defeated. Under the bill, the initial $35 license plate fee for these vehicles would have remained, and a new annual $30 renewal fee would have been added. Under Washington law, a collector vehicle is any motor vehicle that is more than 30 years old, while a horseless carriage is defined as a vehicle that is more than 40 years old.

Washington Street Rods/Customs:

Governor Christine Gregoire signed into law SEMA-model legislation to create a vehicle titling and registration classification for street rods and custom vehicles. The bill defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 30 years old and manufactured after 1948. Kit cars and replica vehicles will be assigned certificates of title bearing the same model-year designations as the production vehicles they most closely resemble.

West Virginia Exhaust Noise:

A bill to provide that the noise from a motor-vehicle exhaust system that has been deemed “disturbing or unreasonably loud” constitutes the crime of disturbing the peace was killed. SEMA opposed the bill because it did not supply law enforcement with an enforcement standard, allowing for subjective judgments on whether an exhaust system was “disturbing or unreasonably loud.” The bill also would have made it difficult for hobbyists to replace factory exhaust systems with more durable, better-performing options. Under the bill, violators could have been fined up to $1,000 per occurrence, jailed for six months, or both.

Wisconsin Imported Collector Cars:

The Wisconsin Department of Transportation officially withdrew its proposal to prohibit the registration of imported vehicles manufactured after 1967 that do not meet Federal Motor Vehicle Safety Standards (FMVSS). SEMA opposed the proposal. U.S. law specifically exempts imported vehicles that are 25 years old and older from these safety standards. The Department of Transportation proposal offered no such reasonable exemption.

Wyoming Vehicle Titles:

Governor Matt Mead signed into law a SEMA-supported bill to ease the burden on hobbyists by providing an exemption from bonded title requirements. By allowing enthusiasts to title vehicles being restored for personal use without posting bond, the exemption reduces costs associated with titling hobby vehicles when an original title was never issued or can no longer be located. The new law allows restorers to title their completed works by submitting an affidavit of vehicle ownership, a notarized bill of sale, a written statement of the value of the vehicle and a VIN inspection. To prevent abuse of the new procedure, titles issued under this procedure will not be transferable for the first 180 days after issuance.

Federal Update

Collector Car Appreciation Day:

At SEMA’s request, U.S. Senators Jon Tester (D-MT) and Richard Burr (R-NC) co-sponsored Senate Resolution 154 designating July 8, 2011, as “Collector Car Appreciation Day.” The date marked the second commemoration in what has become an annual event to raise awareness of the vital role automotive restoration and collection plays in American society. SEMA-member companies, car clubs and individuals helped organize scores of events to celebrate the day, including car shows, small-business open houses and “drive your car to work” displays.

Health Care:

The 2010 health care reform law is scheduled to be implemented over a number of years. Efforts to repeal the law have been blocked by the Democrat-controlled Senate. The U.S. Supreme Court will likely consider the law in 2012—specifically whether the federal government can mandate that individuals purchase insurance. Of most interest to SEMA members are the Small Business Health Options Programs (SHOP exchanges) operated by the states, which will allow small businesses (50 employees) and individuals to pool together to purchase insurance that meets or exceeds new federal minimum standards. While the SEMA-supported exchanges should spur competition, they are not required to begin operating until 2014. This is a problem, since most insurance companies are hiking their premiums now under the guise that they need the additional revenue to meet the new law’s current and anticipated requirements. SEMA remains committed to pursuing additional reforms to benefit small business and is working with the National Federation of Independent Business and the Coalition for Affordable Healthcare toward that goal.

Bonneville Salt Flats:

The Bonneville Salt Flats (BSF) is a national landmark under the jurisdiction of the Bureau of Land Management (BLM). Hundreds of speed records have been set at this unique geological site over the past 100 years. For decades, the BSF has been shrinking as salt brine was transferred to an adjoining mining operation to remove potash. A prototype salt replenishment program from 1997–2002 demonstrated that salt brine could be pumped back onto the salt flats to stabilize the landmark and its underlying aquifer. SEMA has joined with other organizations as part of the “Save the Salt Coalition” urging the BLM to mandate a permanent replenishment program as part of its environmental assessment of the mining operation. The mine owner supports the proposal, which would replace salt in the same amount or more. Once the program is in place, the coalition will identify additional replenishment efforts that can be undertaken by the racing community.

1099 Reporting Rule:

After a year of debate, Congress repealed the costly 1099 reporting requirement included in last year’s health care law. Businesses will no longer be required to issue 1099 forms to all vendors from whom they buy more than $600 worth of goods or services in any year, beginning in 2012. The requirement was intended to prompt vendors receiving 1099 forms to pay taxes on the income. SEMA contended that it would fail to generate much under-reported income but would succeed in punishing businesses that already comply with U.S. tax law. SEMA was an active leader in the repeal effort, working on its own and with a number of other small-business organizations.

2011 Tax Cut Compromise:

Lawmakers agreed to extend the 2001 and 2003 tax cuts for two years, through 2012. The SEMA-supported law includes a retroactive extension of the research-and-development tax credit through 2011, a two-year reinstatement of the estate tax at 35% after the first $5 million, a 100% write-off on capital expenses for businesses during 2011 (up from 50%), and a one-year reduction in the worker’s Social Security payroll tax from 6.2% to 4.2%.

State Sales Tax:

Identical bills have been introduced in the U.S. Congress to require companies that sell goods via the Internet and catalogs to collect sales tax in the same manner as “brick-and-mortar” retailers. The so-called “Main Street Fairness Act” would recognize the “Streamlined Sales and Use Tax Agreement,” an ongoing initiative by state and local governments to address the collection of sales/use taxes. The agreement creates a system for companies to register with member states, collect and remit taxes and file one tax return for each state. Under a 1992 U.S. Supreme Court decision, states cannot force retailers to collect use taxes unless the company has a physical presence in the state (“nexus”). The legislation would provide states with this authority and exempt smaller retailers from the requirement.

Lawsuit Abuse:

The U.S. House Judiciary Committee approved a SEMA-supported bill that would require federal judges to sanction plaintiffs and attorneys who file frivolous lawsuits. The bill will now be scheduled for a House floor vote. Under current law, federal judges are permitted but not required to impose penalties. Courts could also award the prevailing parties reasonable expenses and attorney’s fees in defending against a frivolous lawsuit.

Debit Card Fees:

The Federal Reserve Board issued a rule to limit swipe fees imposed on retailers when accepting debit card payments at $.21 per transaction, effective October 2011. Banks and payment processors may also charge $.01 to$.03 more to cover fraud prevention and other adjustments, bringing the total potential fees to $.24. Bank fees were averaging $.44 before the new limits took effect. The rule does not apply to small banks ($10 billion or less in assets) or to credit card fees.

Online Piracy:

The Senate Judiciary Committee unanimously approved a SEMA-supported bill to help combat online piracy and counterfeiting. The legislation would authorize the Department of Justice and intellectual property rights holders to pursue legal actions against rogue websites dedicated to selling counterfeit goods and copyrighted material. The sites are often foreign owned and operated. Courts would be authorized to issue orders requiring search engines in the United States to stop displaying advertising and links to infringing domain names and prevent consumer payments. The alleged infringer could challenge the actions in court. The legislation would address the growing problem of online sales of counterfeit goods, which cost American jobs, expose consumers to health and safety threats and tarnish business reputations. The bill has been sent to the Senate floor.

Warranty Denials:

The Federal Trade Commission (FTC) issued a consumer alert which confirms that the Magnuson-Moss Warranty Act makes it illegal for companies to void a warranty or deny coverage simply because the consumer used an aftermarket part. The alert outlines key provisions in the law that provides protections to car owners. As defined by the FTC, an “aftermarket” part is a part made by a company other than the vehicle manufacturer or the OEM. The FTC’s reference to aftermarket parts is equally applicable to specialty parts. Under the Magnuson-Moss Warranty Act, the warranty cannot be conditioned to a specific brand of parts, services or vehicle modifications unless those parts or services are provided free of charge. The dealer/vehicle manufacturer has the right to deny a warranty repair but must demonstrate that the aftermarket part caused the problem. The warranty remains in effect for all other covered parts.

Employee Rights Poster:

The National Labor Relations Board (NLRB) postponed the start date for a rule requiring employers to display a poster informing workers of their right to unionize and bargain collectively. The rule is now scheduled to take effect on January 31, 2012. The 11-x17-in. notice poster can be downloaded for free from the NLRB website. The rule is widely opposed by business groups, including SEMA, over concerns that it unfairly promotes unionization.

Federal Red Tape:

President Obama issued an executive order directing all federal agencies to identify unnecessary regulations that hinder economic growth. In response, the agencies have identified more than 500 regulatory requirements that can be dropped and potentially save $10 billion in productivity and reduced paperwork. SEMA and many in the business community still contend that the government reforms do not go far enough in lessening regulatory burdens, pointing to other candidates for change such as health care reform and greenhouse gas regulations for stationary sources.

Ethanol Content in Gasoline:

The U.S. Environmental Protection Agency (EPA) ruled that gasoline for 2001 and newer vehicles may contain up to 15% ethanol (E15) rather than 10% ethanol (E10). The EPA agreed with SEMA that the corrosive effects associated with E15 posed a risk to model-year ’00 and older vehicles. The EPA will require that an orange and black label be placed on fuel pumps dispensing E15 gasoline, warning consumers not to use the fuel in older vehicles because it could cause damage. SEMA opposes the EPA’s decision, since it places the burden on the motorist not to misfuel and exposes millions of vehicles to mechanical breakdowns. SEMA has consistently voiced concern that ethanol increases water formation, which can then create formic acid and corrode metals, plastics and rubber. The EPA’s decision permitting E15 sales is still subject to lawsuits and Congressional actions to delay or overturn the decision.

Alternative Fueled Vehicles:

The EPA streamlined the process for approving fuel conversion systems. The systems allow light- and heavy-duty vehicles to run on alternative fuels (natural gas, propane, alcohol, electricity, etc.) while complying with Clean Air Act emissions standards. The EPA has established a three-tiered compliance process based on the age of the vehicle. A certificate is required only for newer vehicles (less than two years old). For intermediate-aged engines (more than two years old but still within their useful life), exhaust and evaporative emissions tests must be performed to demonstrate compliance. For vehicles that have outlived their useful life, manufacturers must submit a description of the conversion to the EPA to demonstrate that it is well-engineered.

Fuel Economy Standards:

The federal government, California regulators and auto industry representatives agreed on fuel economy and carbon dioxide (CO2) emissions limits for model-year ’17–’25 vehicles. The fleetwide average will rise from 35.5 miles per gallon (mpg) at the end of 2016 to 54.5 mpg for model-year ’25—a nearly 5% annual increase with slightly lower standards for light-duty trucks. The agreement preserves California’s authority to regulate CO2 emissions and other greenhouse gases while creating a single national standard. CO2 emissions and fuel economy are linked, since carbon dioxide is a byproduct of fossil fuel combustion. The automakers pursued an agreement to increase fuel economy, which would also preserve affordability, vehicle choice, jobs and safety. The EPA and NHTSA will now draft regulations to implement the agreement.

New-Car Mileage Labels:

The EPA and NHTSA expanded the amount of fuel economy information contained on new-vehicle window stickers. Among other changes, the information will now include the amount of carbon dioxide emitted by the vehicle. The agencies adopted a SEMA-supported approach to incorporate graphics, increase type size and use other visual tools to help focus consumer attention on fuel economy. The agencies abandoned a proposal to use an A–D letter grading system, which SEMA deemed to be too simplistic. Instead, cars will be ranked on a fleetwide 10-point scale for both fuel economy and greenhouse gas ratings and smog emissions. The labels will be required on all new cars starting in 2013, although automakers and dealers may voluntarily use them sooner.

Vehicle Lighting:

The NHTSA amended FMVSS No. 108 to correct technical errors and address concerns that the standard was changed in substance when it was reorganized in 2007. The standard had been amended many times since it was first adopted in 1967 in order to address technological advances and enhance safety. In the process, the old regulation became unnecessarily complex and difficult to understand. The intent of the 2007 revision was to simplify the regulation to the extent possible. The NHTSA is still reviewing the revised standard to confirm that there were no other changes of substance. The standard is scheduled to take effect in December 2012, although voluntary compliance is now permitted.

Anti-Ejection Rule:

The NHTSA established a new safety standard, FMVSS No. 226, intended to prevent occupants from being ejected through side windows during a vehicle rollover or side-impact crash. Vehicle manufacturers will have flexibility in determining how to meet the standard’s performance requirements. Anticipated automaker alternatives include using advanced window glazing, making side air bags larger and more robust, or tethering side air bags to the base of the vehicle’s pillars. FMVSS No. 226 will be phased in over a four-year period beginning in 2013.

Rearview Cameras:

The NHTSA will soon require that all new passenger cars be equipped with a rearview camera system as required by a 2008 law. The equipment is intended to prevent back-over accidents by alerting drivers when pedestrians are behind the vehicles. The NHTSA is finalizing performance requirements to be achieved but allow manufacturer discretion when selecting the video camera system. The rule is to be phased in by 2014. The specialty-equipment aftermarket has been at the forefront of offering cameras and sensors to address the issue.

Wilderness:

A House Natural Resources Subcommittee held a hearing on SEMA-supported legislation to release 42 million acres of land from a wilderness designation. The lands have been set aside as “wilderness study areas” or “inventoried roadless areas.” The “wilderness” designation is consequential, since no mechanized activity is permitted on lands so designated. Following extensive reviews, the BLM and the U.S. Forest Service have identified the 42 million acres as not suitable as wilderness. The agencies would be directed to manage the lands for multiple uses.

Wild Lands:

The BLM withdrew its controversial “wild lands” policy, which directed lands with potential wilderness qualities to be managed as wilderness. SEMA joined with a number of other organizations to oppose the program implemented last year, since it usurps the exclusive authority of Congress to designate “wilderness.” The BLM manages more than 250 million acres across the western U.S. and Alaska, 22% of which already has the wilderness designation. Under the wild lands program, the BLM was directed to review its inventory in search of more wild lands.  

Thu, 12/01/2011 - 09:25
  Scion FR-S Launch
  Scion unveils its 2013 FR-S compact, which is expected to be of high interest to enthusiasts in the youth segment.

Scion has unveiled the 2013 FR-S compact rear-wheel-drive sports car, a high-performance coupe that will go on sale in the spring of 2012.

The FR-S, which stands for Front-engine, Rear-wheel drive, Sport; is Scion’s version of the car jointly developed in a partnership with Subaru. Subaru’s version is called the BRZ. Both cars are expected to be of high interest to enthusiasts in the youth segment.

Pictured below is an FR-S with modifications by GReddy. (Word is that GReddy may be working on a race version of the FR-S, which is expected to make ideal raw material for drifting and handling events.)

The cars offer the world’s only flat boxer engine in a front-engine, rear-wheel-drive configuration. The engine’s compact size and flat shape allow it to be mounted mid-ship and extremely low, giving the car a dynamically favorable front-to-rear weight ratio of 53:47 and a low center of gravity comparable to some exotic supercars.

The FR-S’s 2.0L, naturally aspirated four-cylinder engine is the product of the joint development between Toyota and Subaru.

  Scion FR-S
  Here we see a customized version of the FR-S, showing how enthusiasts would be likely to adapt to the car. This car has aftermarket wheels, brakes, tires and a custom interior. It’s expected that between Subaru and Scion, plus a European version marketed under the Toyota brand, there will be sufficient volume to make parts development an attractive investment.

The partnership begins by combining Subaru’s newly developed horizontally opposed engine and Toyota’s cutting edge D-4S injection system that incorporates both direct and port injection.

The D-4S system, partnered with a high 12.5:1 compression ratio, results in 200 hp and 151 lb.-ft. of torque.  

Scion plans to hold a measuring session some time in the early spring, which would allow interested SEMA manufacturing members to get an early look at the car.

Pricing has not been announced, but expectations are that the car will launch at a price somewhere under $30,000.



Thu, 12/01/2011 - 09:23

SEMA News—December 2011

9 Current and Emerging Trends and Tools

Developments and Strategies That Every Company Should Explore

 
The best technology available to a business is not necessarily a specific hardware or software tool but rather an overall technology management strategy with a focus on critical thinking and process improvement. 
   
Business technology is in a constant state of evolution, and it can be a maddening chore to try to keep up. It seems that every innovation begets an even newer version only a few weeks later. In some cases, the latest gizmo is only a marginal improvement on what went before, but there are significant trends and tools that simply cannot be ignored. In some very tangible instances, a company can be left behind while its competitors employ technological tools to expand and improve.

“The best technology available to any business in the aftermarket industry is not necessarily a specific hardware or software tool, but rather an overall technology management strategy with a deep focus on critical thinking and process improvement,” said Jason Braun, executive vice president of Meyer Distributing Inc. “Technology is not considered a cost but an investment in gaining a competitive advantage in your marketplace. The key components to identify are the investments in technology that will produce returns on investment greater than costs. Ask yourself when it has ever paid off to be behind the curve.”

One way to keep abreast of the latest technology trends is to watch computer-store advertising for hardware and to keep tabs on sources, such as CNET, for software and more general trends, said Luanne Brown, founder and president of eTool Developers.

“People tend not to realize how far behind they are until they start searching for new products,” she said. “Sometimes you can just Google pertinent topics and 20 forums will come up containing relevant information. When you do that, though, be sure to enter the year with your keywords. Otherwise you’ll find yourself searching through ancient articles that are outdated.”

SEMA News polled Braun, Brown and other business technology experts about current and emerging tools and trends. They provided a list of nine that every business should be aware of and adopt wherever appropriate.

The Foundation for Everything: ACES and PIES

The Automotive Aftermarket Industry Association (AAIA) Catalog Enhanced Standard (ACES) and Product Information Exchange Standard (PIES) are electronic data standards for product information, such as brand identification, part number or category, product description, pricing and specs. Utilizing these standards allows manufacturers and resellers—including warehouse distributors, jobbers, retailers and installers—to quickly and accurately identify specific products and applications.

Confusion is rampant without standards. For instance, does the part fit a Ford F-150 or an F150? Is it a head light or a headlight? Does it weigh 5.3 lb, 5.3 lbs., 5.3 pounds or even 2.4 kilograms (or kg or kgs)? While the answers may be obvious to an intuitive human being, a computer sees each of these examples as a new and unique element. The results of a computerized misinterpretation are frequently mistakes or redundancy in ordering or delivery. Using standard terms to which all parties agree regarding nomenclature, pricing and dimensional data prevents errors and ensures that the supply chain provides the right components for the right applications.

ACES provides a reliable way of defining an application with a part number. PIES defines properties such as dimensions, weights and pricing.

“When a new product is released with PIES in an electronic catalog, it can go through every function of the supply chain down to the retailer’s Internet site automatically and almost instantaneously,” said Bob Castle, director of eCommerce for Covercraft Industries Inc. “How the part is presented and sold is defined at the starting point rather than piecemeal as the engineering, marketing and selling programs develop. It is important that the industry adopts the standards.”

ACES and PIES may seem complex, but upkeep is a relative breeze once the standards are implemented. Learn more here.

Using the Data: Electronic Cataloging

“As technology advances, paper catalogs are becoming less relevant,” said Tim Martin, vice president of communications for K&N Engineering Inc. “Consumers and resellers are using the Internet more and more to research parts, but Internet search technologies—Google, for instance—can be imprecise. They’re quick, but they don’t allow very fine control in the way that an electronic catalog does.”

Presenting information electronically is different from printing it on a sheet of paper. Precision is important for the lookup process—another reason for using ACES and PIES standards. As an example, K&N can provide data in ACES and PIES or a number of other common or proprietary formats, but complete industry adoption of the standards would simplify the process.

“We provide basic product information—specifications, installation instructions, supporting documentation, images, vehicle applications—all the information required to build a fully functional electronic catalog,” Martin said, “but the real question is how somebody gets that information integrated into their business process when they are trying to sell a part or ship a part.”

Martin said that most resellers and distributors need the support of a consolidating agent—a company that specializes in pulling their data together for them—because it can be difficult to compile data from hundreds of manufacturers. Some of the market leaders for data consolidation include Activant, Datagility, Wrenchhead, Digital Performance, DCi and eTool Developers.

“It really comes down to the type of business and the type of data that best fits the business,” Martin said, “but it’s important that manufacturers keep resellers engaged in the selling process. They have to have a way to repurpose, republish and maintain the information. The challenge is that industry clients are published through different consolidators, and it’s very difficult to get timely data across a wide range of product lines. Understanding electronic cataloging technology also provides an understanding of why a data pool is beneficial for the industry.”

Mobile Computing

 
Businesses can use social media to spread the word using customer ratings, reviews, forums and referrals. Messages on social media sites are spread from user to user as people post comments that their friends then view.
   
Remember when a cell phone was just a phone? The advances in smartphone technology—and now tablet computers—are perhaps the starkest indicator of how quickly technology changes. Current trends indicate that more mobile devices will be shipped than personal computers in the next 18 months. And those mobile devices will increasingly be used to research, shop for and purchase goods of all types. Part of that enormous growth will be due to “thin-client” methodologies in which smartphone applications are stored and delivered from “the cloud” (see p. 74) so that vast libraries of software support these powerful handheld devices.

“A larger and larger percentage of people are looking for products on their personal digital assistants, whether they’re iPhones, iPads, Androids or whatever,” Castle said. “It’s evolving even faster than we think, so we need to take a good look at how we are supporting and selling to our customers in those arenas.”

There are smartphone and tablet applications available today that allow a consumer to enter product keywords—P235/70R16 performance tire, for instance—and the phone will not only find the product, but also indicate the price and provide directions for getting to retail stores that carry it.

“And you can extend that to your car and its engine for hard parts and repair,” said Castle. “That same smartphone with another application ties into the OBDII port and tells you that you just got fault number 48223. It tells you where to go to get it fixed before the check-engine light even comes on. And it’s going to get better. We’re where MapQuest was when it could get you to your hotel but might give you 10 extra turns versus the Google maps application today that takes you straight there in five minutes.”

Cloud Computing

“Mobile computing naturally leads to cloud computing,” said Brown. “People think the cloud is this mysterious thing, but it’s really just web-based services at a core location on the web where you connect to your applications. A lot of people do that with social networking, for instance, but now we’re also doing things such as communicating with sales staff and customers.”

In cloud computing, users access shared resources, software and information on demand. Businesses can access those single-point resources from multiple computers rather than housing each piece of software or data on every machine. That allows much smaller individual hard drives even though the random-access memory (the machine’s computing resource as opposed to its storage capacity) remains extremely quick and powerful.

“You access tools or software from the cloud,” said Gigi Ho, founder and data goddess with Digital Performance Inc. “Cloud computing includes software such as Google apps; utilities, such as on-demand data centers like Amazon S3 or Dropbox; web services, such as those used by UPS, the U.S. Postal Service and eBay that allow computing of shipping charges; and Internet technology service providers, such as Postini spam filtering and Dell’s SecureWorks online security system.”

With increases in mobile computing, using the cloud concept allows both individuals and businesses to access information and services from virtually anywhere to extend their reach.

Location-Based Service Applications

 
Electronic cataloging allows very fine control of product searches. Standardized data provides even more accurate information for every link in the supply chain.
   
According to Aftermarketer.com, smartphones are also giving automotive specialty-equipment companies a whole new way to interact with customers through location-based service (LBS) applications, which allow people to tell their online network of friends about their current location. Google and Facebook recently rolled out LBS applications and features, and other popular LBS applications include Foursquare and Gowalla.

“This is a great way for automotive industry companies to reach a new generation of young customers,” said S. Kellie Colf, former Aftermarketer.com vice president of sales and marketing and now director of sales and marketing for eTool Developers. “You can advertise deals and specials through these applications, which entice customers to visit your business and tell their online friends.”

LBS applications encourage impulse buying, Colf said. And unlike direct mail or newspaper ads, customers see LBS promotions when they’re near a business, so the chances are better that they’ll respond to promotions. (For more information about location-based service applications, visit www.facebook.com/places or www.foursquare.com.)

Localized InternetAdvertising

Understanding and properly using search technology is crucial for any business in the Internet age. Some smaller retailers have been hesitant to employ search-engine optimization, doubtful about the need for national reach. But local searches now allow a customer to shop for products with bull’s-eye precision.

“It’s more than just the natural search results that tend to be more global,” said Martin. “A local parts and accessories business can concentrate on advertising to those searches that are occurring within their geographical area, which allows them to cost-effectively advertise as a local reseller. And for the industry as a whole, that can help grow the market.”

Resellers can drive the dialog about vehicle customization in general using localized Internet advertising while providing a regional presence, a face and a point of sale. A wide variety of Internet consultants are available to advise retailers and help develop localized advertising techniques. Get started with the keywords “localized Internet advertising” on any search engine.

Quick Response Codes

Quick response codes (QRC) are the next generation of barcodes. They are the square, 2-D images that customers can scan with a smartphone camera to open a browser to a specific website, automatically add a contact, display a text message, dial a phone number or register a promotion. The customer simply downloads a scanner application from a website such as RedLaser
(www.redlaser.com) to begin scanning quick response codes images.

“QRCs are becoming a way to link traditional marketing with 21st century marketing tactics,” said Colf. “Businesses can place QRCs on in-store posters, direct-mail advertisements magazine advertisements and even billboards. And there are plenty of online websites that allow you to create QRCs for free.”

Popular QRC generators include Paperlinks and Kaywa.

Social Media

 
Some smartphone and tablet applications allow a consumer to enter product keywords—P235/70R16 performance tire, for instance—to find the product, its price and directions for getting to retail outlets that carry it.
   
Facebook, LinkedIn, Twitter and YouTube have created a whole new way to market products and services and to network with either like-minded “friends” or share industry profiles. Businesses can use social media to spread the word using customer ratings, reviews, forums and referrals. New categories, such as group purchasing sites like Groupon and Woot, can be used to drive traffic directly to a business.

The number of people who use these networks is staggering: 500 million on Facebook alone. Messages on social media sites are spread from user to user as people post comments that their friends then view. Because the comments are from a trusted third-party source rather than from a company, the messages carry greater legitimacy. Thus, any social media user can become a piece of a company’s marketing campaign at virtually no expense.

SEMA offers a number of business technology courses in its new Learning Management System, which is under development by the SEMA Education Institute. A social media course is currently available (free to SEMA members and, for a limited time, to nonmembers as well) at www.SEMA.org/sei.

Rapid Prototyping

While all of the other technologies we’ve mentioned here concern marketing and sales, rapid prototyping delves into product development. (See “Just Hit Print” on p. 66) Most manufacturers know about it, but smaller companies shied away because of its high costs. As with most technologies, however, progress brings not only improved systems, but also better pricing.

In rapid prototyping, a 3-D printer reads data from a computer-aided design (CAD) drawing and then builds a prototype by putting down layers of either liquid, powder or sheet material. The cross sections are eventually fused together into a complete model of practically any part, no matter how complex.

“To have speed to market, you have to have pretty robust R&D,” said Ho, “and you have to have a way of getting the product from R&D into production relatively quickly. Rapid prototyping is a fantastic way to go about it, and it’s becoming more economical.”

For information about rapid prototyping, contact Oscar Muñoz, SEMA’s vehicle product data manager, at oscarm@sema.org or 909-978-6731.  

Thu, 12/01/2011 - 09:23

SEMA News—December 2011

9 Current and Emerging Trends and Tools

Developments and Strategies That Every Company Should Explore

 
The best technology available to a business is not necessarily a specific hardware or software tool but rather an overall technology management strategy with a focus on critical thinking and process improvement. 
   
Business technology is in a constant state of evolution, and it can be a maddening chore to try to keep up. It seems that every innovation begets an even newer version only a few weeks later. In some cases, the latest gizmo is only a marginal improvement on what went before, but there are significant trends and tools that simply cannot be ignored. In some very tangible instances, a company can be left behind while its competitors employ technological tools to expand and improve.

“The best technology available to any business in the aftermarket industry is not necessarily a specific hardware or software tool, but rather an overall technology management strategy with a deep focus on critical thinking and process improvement,” said Jason Braun, executive vice president of Meyer Distributing Inc. “Technology is not considered a cost but an investment in gaining a competitive advantage in your marketplace. The key components to identify are the investments in technology that will produce returns on investment greater than costs. Ask yourself when it has ever paid off to be behind the curve.”

One way to keep abreast of the latest technology trends is to watch computer-store advertising for hardware and to keep tabs on sources, such as CNET, for software and more general trends, said Luanne Brown, founder and president of eTool Developers.

“People tend not to realize how far behind they are until they start searching for new products,” she said. “Sometimes you can just Google pertinent topics and 20 forums will come up containing relevant information. When you do that, though, be sure to enter the year with your keywords. Otherwise you’ll find yourself searching through ancient articles that are outdated.”

SEMA News polled Braun, Brown and other business technology experts about current and emerging tools and trends. They provided a list of nine that every business should be aware of and adopt wherever appropriate.

The Foundation for Everything: ACES and PIES

The Automotive Aftermarket Industry Association (AAIA) Catalog Enhanced Standard (ACES) and Product Information Exchange Standard (PIES) are electronic data standards for product information, such as brand identification, part number or category, product description, pricing and specs. Utilizing these standards allows manufacturers and resellers—including warehouse distributors, jobbers, retailers and installers—to quickly and accurately identify specific products and applications.

Confusion is rampant without standards. For instance, does the part fit a Ford F-150 or an F150? Is it a head light or a headlight? Does it weigh 5.3 lb, 5.3 lbs., 5.3 pounds or even 2.4 kilograms (or kg or kgs)? While the answers may be obvious to an intuitive human being, a computer sees each of these examples as a new and unique element. The results of a computerized misinterpretation are frequently mistakes or redundancy in ordering or delivery. Using standard terms to which all parties agree regarding nomenclature, pricing and dimensional data prevents errors and ensures that the supply chain provides the right components for the right applications.

ACES provides a reliable way of defining an application with a part number. PIES defines properties such as dimensions, weights and pricing.

“When a new product is released with PIES in an electronic catalog, it can go through every function of the supply chain down to the retailer’s Internet site automatically and almost instantaneously,” said Bob Castle, director of eCommerce for Covercraft Industries Inc. “How the part is presented and sold is defined at the starting point rather than piecemeal as the engineering, marketing and selling programs develop. It is important that the industry adopts the standards.”

ACES and PIES may seem complex, but upkeep is a relative breeze once the standards are implemented. Learn more here.

Using the Data: Electronic Cataloging

“As technology advances, paper catalogs are becoming less relevant,” said Tim Martin, vice president of communications for K&N Engineering Inc. “Consumers and resellers are using the Internet more and more to research parts, but Internet search technologies—Google, for instance—can be imprecise. They’re quick, but they don’t allow very fine control in the way that an electronic catalog does.”

Presenting information electronically is different from printing it on a sheet of paper. Precision is important for the lookup process—another reason for using ACES and PIES standards. As an example, K&N can provide data in ACES and PIES or a number of other common or proprietary formats, but complete industry adoption of the standards would simplify the process.

“We provide basic product information—specifications, installation instructions, supporting documentation, images, vehicle applications—all the information required to build a fully functional electronic catalog,” Martin said, “but the real question is how somebody gets that information integrated into their business process when they are trying to sell a part or ship a part.”

Martin said that most resellers and distributors need the support of a consolidating agent—a company that specializes in pulling their data together for them—because it can be difficult to compile data from hundreds of manufacturers. Some of the market leaders for data consolidation include Activant, Datagility, Wrenchhead, Digital Performance, DCi and eTool Developers.

“It really comes down to the type of business and the type of data that best fits the business,” Martin said, “but it’s important that manufacturers keep resellers engaged in the selling process. They have to have a way to repurpose, republish and maintain the information. The challenge is that industry clients are published through different consolidators, and it’s very difficult to get timely data across a wide range of product lines. Understanding electronic cataloging technology also provides an understanding of why a data pool is beneficial for the industry.”

Mobile Computing

 
Businesses can use social media to spread the word using customer ratings, reviews, forums and referrals. Messages on social media sites are spread from user to user as people post comments that their friends then view.
   
Remember when a cell phone was just a phone? The advances in smartphone technology—and now tablet computers—are perhaps the starkest indicator of how quickly technology changes. Current trends indicate that more mobile devices will be shipped than personal computers in the next 18 months. And those mobile devices will increasingly be used to research, shop for and purchase goods of all types. Part of that enormous growth will be due to “thin-client” methodologies in which smartphone applications are stored and delivered from “the cloud” (see p. 74) so that vast libraries of software support these powerful handheld devices.

“A larger and larger percentage of people are looking for products on their personal digital assistants, whether they’re iPhones, iPads, Androids or whatever,” Castle said. “It’s evolving even faster than we think, so we need to take a good look at how we are supporting and selling to our customers in those arenas.”

There are smartphone and tablet applications available today that allow a consumer to enter product keywords—P235/70R16 performance tire, for instance—and the phone will not only find the product, but also indicate the price and provide directions for getting to retail stores that carry it.

“And you can extend that to your car and its engine for hard parts and repair,” said Castle. “That same smartphone with another application ties into the OBDII port and tells you that you just got fault number 48223. It tells you where to go to get it fixed before the check-engine light even comes on. And it’s going to get better. We’re where MapQuest was when it could get you to your hotel but might give you 10 extra turns versus the Google maps application today that takes you straight there in five minutes.”

Cloud Computing

“Mobile computing naturally leads to cloud computing,” said Brown. “People think the cloud is this mysterious thing, but it’s really just web-based services at a core location on the web where you connect to your applications. A lot of people do that with social networking, for instance, but now we’re also doing things such as communicating with sales staff and customers.”

In cloud computing, users access shared resources, software and information on demand. Businesses can access those single-point resources from multiple computers rather than housing each piece of software or data on every machine. That allows much smaller individual hard drives even though the random-access memory (the machine’s computing resource as opposed to its storage capacity) remains extremely quick and powerful.

“You access tools or software from the cloud,” said Gigi Ho, founder and data goddess with Digital Performance Inc. “Cloud computing includes software such as Google apps; utilities, such as on-demand data centers like Amazon S3 or Dropbox; web services, such as those used by UPS, the U.S. Postal Service and eBay that allow computing of shipping charges; and Internet technology service providers, such as Postini spam filtering and Dell’s SecureWorks online security system.”

With increases in mobile computing, using the cloud concept allows both individuals and businesses to access information and services from virtually anywhere to extend their reach.

Location-Based Service Applications

 
Electronic cataloging allows very fine control of product searches. Standardized data provides even more accurate information for every link in the supply chain.
   
According to Aftermarketer.com, smartphones are also giving automotive specialty-equipment companies a whole new way to interact with customers through location-based service (LBS) applications, which allow people to tell their online network of friends about their current location. Google and Facebook recently rolled out LBS applications and features, and other popular LBS applications include Foursquare and Gowalla.

“This is a great way for automotive industry companies to reach a new generation of young customers,” said S. Kellie Colf, former Aftermarketer.com vice president of sales and marketing and now director of sales and marketing for eTool Developers. “You can advertise deals and specials through these applications, which entice customers to visit your business and tell their online friends.”

LBS applications encourage impulse buying, Colf said. And unlike direct mail or newspaper ads, customers see LBS promotions when they’re near a business, so the chances are better that they’ll respond to promotions. (For more information about location-based service applications, visit www.facebook.com/places or www.foursquare.com.)

Localized InternetAdvertising

Understanding and properly using search technology is crucial for any business in the Internet age. Some smaller retailers have been hesitant to employ search-engine optimization, doubtful about the need for national reach. But local searches now allow a customer to shop for products with bull’s-eye precision.

“It’s more than just the natural search results that tend to be more global,” said Martin. “A local parts and accessories business can concentrate on advertising to those searches that are occurring within their geographical area, which allows them to cost-effectively advertise as a local reseller. And for the industry as a whole, that can help grow the market.”

Resellers can drive the dialog about vehicle customization in general using localized Internet advertising while providing a regional presence, a face and a point of sale. A wide variety of Internet consultants are available to advise retailers and help develop localized advertising techniques. Get started with the keywords “localized Internet advertising” on any search engine.

Quick Response Codes

Quick response codes (QRC) are the next generation of barcodes. They are the square, 2-D images that customers can scan with a smartphone camera to open a browser to a specific website, automatically add a contact, display a text message, dial a phone number or register a promotion. The customer simply downloads a scanner application from a website such as RedLaser
(www.redlaser.com) to begin scanning quick response codes images.

“QRCs are becoming a way to link traditional marketing with 21st century marketing tactics,” said Colf. “Businesses can place QRCs on in-store posters, direct-mail advertisements magazine advertisements and even billboards. And there are plenty of online websites that allow you to create QRCs for free.”

Popular QRC generators include Paperlinks and Kaywa.

Social Media

 
Some smartphone and tablet applications allow a consumer to enter product keywords—P235/70R16 performance tire, for instance—to find the product, its price and directions for getting to retail outlets that carry it.
   
Facebook, LinkedIn, Twitter and YouTube have created a whole new way to market products and services and to network with either like-minded “friends” or share industry profiles. Businesses can use social media to spread the word using customer ratings, reviews, forums and referrals. New categories, such as group purchasing sites like Groupon and Woot, can be used to drive traffic directly to a business.

The number of people who use these networks is staggering: 500 million on Facebook alone. Messages on social media sites are spread from user to user as people post comments that their friends then view. Because the comments are from a trusted third-party source rather than from a company, the messages carry greater legitimacy. Thus, any social media user can become a piece of a company’s marketing campaign at virtually no expense.

SEMA offers a number of business technology courses in its new Learning Management System, which is under development by the SEMA Education Institute. A social media course is currently available (free to SEMA members and, for a limited time, to nonmembers as well) at www.SEMA.org/sei.

Rapid Prototyping

While all of the other technologies we’ve mentioned here concern marketing and sales, rapid prototyping delves into product development. (See “Just Hit Print” on p. 66) Most manufacturers know about it, but smaller companies shied away because of its high costs. As with most technologies, however, progress brings not only improved systems, but also better pricing.

In rapid prototyping, a 3-D printer reads data from a computer-aided design (CAD) drawing and then builds a prototype by putting down layers of either liquid, powder or sheet material. The cross sections are eventually fused together into a complete model of practically any part, no matter how complex.

“To have speed to market, you have to have pretty robust R&D,” said Ho, “and you have to have a way of getting the product from R&D into production relatively quickly. Rapid prototyping is a fantastic way to go about it, and it’s becoming more economical.”

For information about rapid prototyping, contact Oscar Muñoz, SEMA’s vehicle product data manager, at oscarm@sema.org or 909-978-6731.  

Thu, 12/01/2011 - 09:20

Are you hunting for a new job? The “Positions Available” section in the SEMA Member Classifieds lists more than 50 job openings around the country. Here are some of the latest classifieds posted to the website.

  • Car Guy Nation is hiring independent vendor managers in Chicago, Miami, New York and Los Angeles responsible for 25–50 assigned vendors. Candidates must generate an assigned list of a minimum of 25 target vendors. The draw is $2,500 a month against sales commissions, which is 10% of the gross revenue generated by the independent vendor manager-assigned vendors.
  • Accessories of Chicago, located in Madison, Wisconsin, is hiring an account sales manager responsible for attaining monthly/yearly sales objectives, implementing an accessories selling process in assigned dealerships, improving customer service and communicating with retail and wholesale personnel. Previous successful automotive sales experience is preferred.
  • American Eagle Wheel, located in Chino, California, is hiring an aggressive outside salesperson with three years aftermarket wheel/tire experience and/or automotive parts experience, great customer service skills and the ability to work well in a fast-paced quota-driven environment. Candidates will service existing accounts and cultivate new ones.
  • Custom Performance Engineering Inc., located in Beltsville, Maryland, is hiring an organized sales manager to take the company's sales department to the next level.

For more job listings, click here. 

Thu, 12/01/2011 - 09:17

SEMA News—December 2011

INTERNATIONAL
By Linda Spencer

SEMA Members Head to the Middle East in 2012

Why the Region Is One of the Most Promising for U.S. Specialty-Equipment Manufacturers

 
Off-roading is a big and growing pastime in the UAE and throughout the Middle East where the expansive sand dunes are a favorite destination. 
   
Some of the fastest-growing markets in recent years have been in the Middle East—the United Arab Emirates (UAE) and the five neighboring countries comprising the Gulf Cooperation Council (GCC), which are Bahrain, Kuwait, Oman, Qatar and Saudi Arabia. The specialty-equipment markets in the region are in their infancy, and U.S. manufacturers have the opportunity to get into these respective markets during these exciting early days.

This is the first of a two-part series on some compelling reasons why U.S. manufacturers should take a closer look at selling into the Middle East.

“The market is developing at a breakneck speed,” said Paul “Scooter” Brothers, SEMA Chairman of the Board and COO of COMP Performance Group. “Companies that enter the market now have the best chance to do well. Those that follow might not be as successful. The best part is that the market consists of many U.S. vehicles, so little or no development time is required,” Brothers said.

Good Reasons to Look at the Middle East Market

Passionate and Growing Car Culture Booming in the Region: Some quick observations to be noted when driving through Dubai and Abu Dhabi reveal high-end customized vehicles, lots of SUVs and a great diversity of cars.

“The UAE market demonstrated to me a large degree of promise as a growth opportunity for SEMA-member companies,” said Jim Cozzie, RTM Productions. “There is a demand, there are resources and there is a wide variety of vehicles that our member companies currently offer parts for. It is evident from observations at the street level that this is a market waiting to be serviced. I have always said that car guys are car guys no matter where one travels in the world, and the Gulf region is no different. There is a passion for all types of vehicles there, a growing community of racing competitors and a thirst for the ability to accessorize and customize one’s ride.”

   
 
SEMA is creating an opportunity for U.S. manufacturers to meet one-on-one with top buyers from throughout the region. For more information on this April 17–20 event, contact Linda Spencer SEMA’s director of international relations, at lindas@sema.org.
   
The Country Boasts the Largest Number of Motorsports Facilities Per Capita in the World: Motorsports is an emergent sport in the region since the introduction of the Formula 1 Grand Prix in November 2009 and that state-of-the-art facilities for both professional and amateur racing opened at the Dubai Autodrome and Yas Marina Circuit in Abu Dhabi.

The Yas Marina Circuit is also home to the Middle East’s first approved National Hot Rod Association (NHRA) dragstrip. Bahrain International Circuit is the latest Middle East venue to hold officially sanctioned NHRA races.

One of the priorities of the UAE racing authorities is to help develop a new generation of motorsport talent in the Middle East by paving the way for low-cost entry into the sport at the grassroots level.

“The region is underestimated,” said Alex Borla, CEO of Borla Performance. “There is a hunger to be different and to stand out among wealthy peers. With a sophisticated understanding of quality and seemingly unlimited funds to buy nothing but the best, don’t be surprised to see cars that rival the rest of the world. They have our attention; it’s a happening place.”

Thu, 12/01/2011 - 09:17
Thu, 12/01/2011 - 09:16
American classic cars and late-model musclecars have huge and loyal followings in the Middle East. There is brisk business in supplying products to meet consumer demand in the United Arab Emirates (UAE)—the gateway to the region—and surrounding countries. Exciting opportunities to supply those engaged in car collecting, off roading and upgrades for street performance vehicles—to name a few of the fastest growing niches—is driving interest for the 2012 SEMA Middle East one-on-one matchmaking event in the UAE.

Join SEMA members traveling to the region for meetings with pre-vetted buyers from throughout the UAE, Saudi Arabia, Kuwait and Qatar in a day-long series of face-to-face meetings and networking events, April 17–20.

Explore opportunities for your company and, for a limited time, take advantage of a $1,000 grant from the U.S. government to defray the costs of participating for all qualifying companies. 

Registration is available online.   

For more information, contact Linda Spencer at lindas@sema.org.
Thu, 12/01/2011 - 09:16
American classic cars and late-model musclecars have huge and loyal followings in the Middle East. There is brisk business in supplying products to meet consumer demand in the United Arab Emirates (UAE)—the gateway to the region—and surrounding countries. Exciting opportunities to supply those engaged in car collecting, off roading and upgrades for street performance vehicles—to name a few of the fastest growing niches—is driving interest for the 2012 SEMA Middle East one-on-one matchmaking event in the UAE.

Join SEMA members traveling to the region for meetings with pre-vetted buyers from throughout the UAE, Saudi Arabia, Kuwait and Qatar in a day-long series of face-to-face meetings and networking events, April 17–20.

Explore opportunities for your company and, for a limited time, take advantage of a $1,000 grant from the U.S. government to defray the costs of participating for all qualifying companies. 

Registration is available online.   

For more information, contact Linda Spencer at lindas@sema.org.
Thu, 12/01/2011 - 09:10

Join the SEMA Council Family

SEMA hosts 10 distinct councils and committees that represent focused niches within the specialty-equipment industry. These groups are comprised of elected volunteers (Select Committee) who guide and direct council activities while representing the membership at large. Although each council acts independently and represents a different segment, they are all focused on the betterment of the industry as a whole.

The value councils provide SEMA and the industry is beyond refute. It is inspiring to witness a diverse collection of company representatives, many of which are direct competitors, come together and develop educational, training, youth awareness and networking events that are, at the core, designed to give back and promote business. An equally important council function is to ensure that SEMA sustains a pulse on the industry and maintains a presence with its members.

The question is often asked, “Why should my company join a council?” The answer is simple. SEMA councils open the doors and provide you exposure to industry leaders, decision makers, trendsetters and a community of like-minded individuals who share your passion and desire to see business succeed and prosper. Once the doors are open, it is your responsibility to take advantage of the benefits by becoming actively involved.

Learn more today
.

Automotive Restoration Market Organization (ARMO)
Hot Rod Industry Alliance (HRIA)
Truck and Off-Road Alliance (TORA)
Manufacturers' Rep Council (MRC)
Motorsports Parts Manufacturers Council (MPMC) Professional Restylers Organization (PRO)
Street Performance Council (SPC)
Wheel & Tire Council (WTC)
SEMA Businesswomen's Network (SBN) Young Executives Network (YEN)


SEMA Councils Recognize Industry Leaders and Pioneers


The annual SEMA Show in Las Vegas brings together individuals and companies representing the diversity and ingenuity that comprise the specialty-equipment industry. Throughout the action-packed week, SEMA and its councils give pause to honor and recognize those who have made significant contributions to their respective industry and helped carve out a path for tomorrow.

As an association, SEMA understands the importance of representing key industry segments, as to better address specific issues and more effectively serve its diverse membership.

Comprised of volunteers, the councils provide the pulse of the industry and help guide programs and services that will drive strategies and offer networking opportunities that directly impact your business. As such, who better to identify and recognize the select individuals and companies that are honored? If you had the chance to attend a council reception, it is likely that you left inspired by the camaraderie, history and ingenuity that drives the association.

On behalf of SEMA and all its councils, congratulations to this year’s honorees and special thanks to the sponsors that made it all possible.


TORA Logo
 
Visit TORA's website.  

TORA Fall Nationals Raises Money for Charity

The TORA Fall Nationals Pinewood Drags, a major element to the council’s annual Industry Awards Reception at the SEMA Show, was a huge success for the second year in a row. Reception attendees had an opportunity to “rent” a Pinewood racer, with all proceeds benefitting SEMA Cares. At the end of eliminations, Wild Boar Products of Stanton, California, emerged victorious. In addition to the Pinewood Drags, TORA also auctioned off a few very special Pinewood cars, built by kids at the Childhelp facility and autographed by none other than seven-time NASCAR Champion Richard Petty. In all, the evening’s donations totaled some $3,800.

“I continue to be humbled by the generosity of our membership,” said TORA Chairman George Lathouris of Keystone Automotive Products. “Setting up the Pinewood Drags at our reception uses a lot of manpower and resources. But, not only does it help raise money for our charities, it allows our Select Committee to interact with the attendees in a very lively manner. When I watch the Select Committee members all working their parts in the evening’s activities and see the generosity and excitement of the attendees, I’m very proud to be a part of this industry.”

  fall nationals
  The 2011 TORA Fall Nationals Pinewood Drags event raised $3,600 in donations for charity.

TORA thanks the following sponsors for their support of the second annual TORA Fall Nationals Industry Awards Reception:

Diamond Sponsors:
THI
Advantage Truck Accessories
Bedrug
Extang
TruXedo
Undercover

Platinum Sponsors:

Restyling Magazine
Cal Trend
Weather Tech

Gold Sponsors:
American Technology Components
AutoAccessoriesGarage.com
DeeZee
Jim Wrobleski & Co.
SNUG Top
Keystone Automotive Operations

Silver Sponsors:
Edge Products
Hella
Hellwig
K&N Filters
SEIA Alliant
Truck Covers
Superchips

TORA Industry Awards

While everyone had fun with the Fall Nationals Pinewood Drags, TORA never fails to maintain a focus on recognizing outstanding individuals and companies within the industry. Racing activities were interrupted following the first round of competition so the 2011 TORA Industry Awards could be presented.

  • 2011 TORA Hall of Fame Award: Ralph Gatti and Aden Miller of A.R.E.
  • 2011 TORA Retailer of the Year: Jordan Camper, Jeff Glover
  • 2011 TORA Chairman’s Award: Tom Brooks, Truckin’ Thunder
  • Best Product Over $500: Cap-Pack, Cargo Storage System
  • Best Product Under $500: Bolt, Toolbox Handle Retrofit Kit

TORA Booth Display Largest Ever

The TORA booth display in Upper South Hall included five outstanding trucks, each sponsored by an TORA-member company. Not only do the vehicles depict TORA-member company products in “real-life” installations, but each one also represents a $1,500 donation to SEMA Cares. TORA and SEMA Cares extend a very special thanks to the following companies and individuals who went the extra mile to have their vehicles in the TORA booth this year.

  • A.R.E. ’11 Ford F-150, NFL Hall of Fame Commemorative Truck
  • Hellwig Products ’12 Ford F-250
  • Powerlabs Diesel ’11 Ford F-350
  • Robert Davis ’11 Toyota Tundra, ’10 Jeep Rubicon sponsored by Rolling Big Power and Plain & Simple by Design

  TORA
  The TORA booth display in Upper South Hall included five outstanding trucks, each sponsored by an TORA-member company.

TORA Education Track Now on SEI

TORA is pleased to announce the launch of an TORA education track for the SEMA Education Institute (SEI). TORA members may now reference and download a number of technical resources from the new TORA learning track that were previously available in hard copy only. Now, TORA members have the information at their fingertips via an Internet connection.

Resources currently available are:

  • TORA Pickup Truck Bed Dimensions – pdf
  • TORA Keyless Entry Connection Guide – pdf
  • TORA CHMSL Wiring Connection Guide – pdf
  • Why Paint Colors Vary – video

“This is very exciting for the Council,” said TORA Chairman George Lathouris of Keystone Automotive. “These reference tools are always appreciated by installers and counter people in the field. SEI provided us a solution that keeps the tools as an TORA-member benefit and makes for quick and timely updating of data. TORA members received an e-mail recently with instruction on how to access their account on SEI. I encourage all members to get familiar with this TORA education track because this is only the beginning—I promise you!”

Learn more about the TORA education tools.

Not yet an TORA member? Download an application or contact Jim Skelly at jimsk@sema.org or 909-978-6690 for more information.

What's the Value of Being an TORA Member?

New Products Showcase – Put your product in front of one of the largest gathering of truck enthusiasts in the country at the Carlisle Truck Nationals.

Networking – TORA mixer at the Carlisle All Truck Nationals, Annual Long-Range Planning meeting and access to TORA members and light-truck industry professionals around the world.

Tools and resources for the retailer and installer – "Pickup Bed Dimensions Sheet," "Keyless Entry Wiring Pickup Points Reference Sheet," "Why Paints Don’t Match" DVD and more.

Education – and TORA-specific learning track on the new SEI from SEMA, coming soon!

Are you on Facebook, LinkedIn or Twitter? TORA Is!

Be sure to follow TORA on all of your favorite social networking sites.

To find these sites, go to www.sema.org/TORA and use the links in the top right-hand corner.

TORA Column in SEMA Member News

Read TORA's column featured in the November/December issue of SEMA Member News.

For more information about TORA, contact Jim Skelly.

Back to Top


ARMO Logo

Visit ARMO's website.

ARMO Presents Awards at “New” Reception

The ARMO SEMA Show reception task force made good on its promise to deliver a revised venue and format for this year’s ARMO Industry Awards Reception at the SEMA Show. Attendees entered a much larger space than in previous years, with Bret Voelkel’s “48 Hour Camaro” on display to greet them and add atmosphere.

“We really wanted to emphasize networking for this reception, since our members tell us that is their No. 1 desired ARMO-member benefit,” said ARMO Chairperson Laura Bergan of American Collectors Insurance. “SEMA and the Hilton came through with additional space, Jason Tolleson did a fantastic job condensing our program, John Menzler secured Brett’s car for the affair, and it all came together for a very enjoyable evening.”

The 2011 ARMO Chairman’s Award was presented to Steve McDonald and the SEMA Legislative and Government Affairs office for their tireless efforts on behalf of the restoration market. In addition to keeping watch over scrappage and titling issues, Car Collector Appreciation Day is regarded as an unprecedented milestone for car enthusiasts everywhere.

The 2011 ARMO Business of the Year was awarded to Steele Rubber Products. This award is highly coveted by restoration companies because it is voted on by the general ARMO membership.

Special Thanks to our Sponsors!

Platinum Sponsors:
Auto Custom Carpets
TrimParts
PUI Interiors
Hemmings Motor News
Dynacorn
Classic Industries

Gold Sponsors:
Auto Trader Classics
Hotrod & Restoration
Source Interlink Media
Steele Rubber Products

Silver Sponsors:
American Autowire
SEIA Alliant

Special Thanks

ARMO extends a sincere thanks to the four car owners who were gracious enough to lend their cars for display in the ARMO/HRIA booth and at the ARMO reception. We cannot have a successful SEMA Show without the support of members like these.

Brett Voelkel brought his ’67 Camaro, dubbed the “48 Hour Camaro” because it was built in just two days, to display inside the ARMO reception. The car is a perfect example of how modern running gear can be mated to a restored vehicle without compromising the appeal of its classic looks.

Gregg Blundell completed a beautiful ’69 Camaro just in time for display in the ARMO booth. Another example of relatively untouched classic body lines mated to modern running gear, Blundell took the upgrades a step further by grafting a complete late-model Camaro interior into the ’69 and making it look factory fresh.

Art Goldstrom loaned us his Boyd Coddington-built ’34 Lincoln two-door sedan, complete with a 460hp V8 engine, C6 transmission and 9-in. Ford rearend.

Lindsay Bradley brought his ’65 Mustang Fastback all the way from Texas just to spend some time in the ARMO booth. The “Silver Fox” is equipped with a Ford Racing Boss 302 engine and a TCI 4R70W AOD automatic transmission.

ARMO also extends a special thanks to ARMO Select Committee member John Menzler of COMP Performance Group for securing the vehicles for display and to HRIA Select Committee members Rick Love and John McLeod for their efforts to organize the delivery and parking of the vehicles. McLeod also made the beautiful display signs for each vehicle. The combined ARMO/HRIA booth is a great example of council collaboration to make a successful event.

ARMO Licensing Guide Now on SEI

ARMO members may now access the ARMO Trademark Licensing Guide online. Previously available only in hard copy, the Guide is now located on the ARMO education track on the SEMA Education Institute (SEI).

ARMO Licensing Overview:

Ever wonder how a company gets a restoration product officially licensed by an original equipment manufacturer (OEM) carmaker? ARMO members can now find introductory information from three OEMs, including preliminary application forms, in one document.

Obtaining a trademark license is one of the few remaining processes that cannot be accomplished "online" or with a simple application. OEM carmakers are very proud and protective of their trademarks. There are many steps involved in order to display an "Officially Licensed" logo on your product. Just finding out where to begin can be a daunting task.

The Trademark Licensing Overview provides ARMO-member companies with the information they need to begin the oftentimes lengthy process in one handy reference document. Ford, GM and Chrysler have supplied contact information, application forms and general process overviews. While the Overview is not a complete guide to trademark licensing, it does provide you with information necessary for all those important first steps.

ARMO Seminars Available on SEI’s New ARMO Education Track

Two ARMO-sponsored education seminars, recorded earlier this year at the 2011 Hotrod & Restoration Show, are now available as part of the ARMO Education Track on the new SEI eLearning Center. The seminars may also be accessed directly from the ARMO website at www.sema.org/armo.

Dick Dixon presents “The Art of Selling” in session one. Dixon is a popular speaker who combines his passion for all things automotive and his experience as an educator to present ideas in new and informative fashion.

Session two features ARMO Chairperson Laura Bergan moderating a panel of industry experts through “Internet Marketing on a Budget.” Panelists Tyler Tanaka, Eric Saltrick and Robert Basha answer questions and provide real-world examples of how a small business can utilize the benefits of the Internet without breaking the budget.

Each seminar is approximately one hour in length, and each is presented in its entirety.

Are you on Facebook, LinkedIn or Twitter? ARMO Is!

Be sure to follow ARMO on all of your favorite social networking sites. To find these sites, go to www.sema.org/armo and use the links in the top right-hand corner.

ARMO Column in SEMA Member News

Read ARMO's column featured in the November/December issue of SEMA Member News.

For more information about ARMO, contact Jim Skelly.

Back to Top


HRIA Logo
 
Visit HRIA's website

HRIA Returns to the Motor City

Join the Hot Rod Industry Alliance in Detroit for its Annual Long Range Planning (LRP) Meeting. Held in conjunction with Championship Auto Shows Detroit Autorama, the seminal meeting will take place February 24, 2012, at Detroit’s COBO Center. In addition to a great Show, guests of HRIA will be treated to a catered lunch and be provided with the opportunity to help influence policy that directly impacts the hot rodding industry.

Topics are diverse and range from legislation and regulatory implications to youth awareness and maximizing growth markets. If you have ever wondered what exactly the SEMA councils are all about, wanted to get more involved or expand your network of industry contacts, come to Detroit and participate in the HRIA Long Range Planning Meeting.

For more information contact Zane Clark at zanec@sema.org.

The Hot Rod Bucket List

1. Lucas Oil Stadium—home to the Indianapolis Colts and host to Super Bowl XLVI.
2. 40 industry leading manufacturers.
3. One location.
4. Free world-class education.
5. 2012 HRIA Education Day.

Check them all off your list at the same time. The Hot Rod Industry Alliance will once again hold its annual Education & Training Day in conjunction with the 14th Annual Hotrod & Restoration Trade Show in Indianapolis, March 22, 2012.

  hria education
  Forty educational sessions will be offered at the 2012 HRIA Education Day in Indianapolis.

This is truly an event you must experience for yourself. Manufacturer seminars start at 8:00 a.m. and run through 6:30 p.m. The 40 sessions offer something for everyone and are designed to help your business grow. Beyond the actual educational seminars, you will find an environment full of networking opportunities fueled by enthusiasts, not just sales guys. Take a look the lineup of participating manufacturers and you will understand why you need to be there:

  • Advanced Clutch Technology
  • American Autowire
  • Art Morrison Enterprises
  • Borgeson Universal Co. Inc.
  • Bowler Performance Transmissions
  • Classic Instruments
  • COMP Cams
  • CON2R
  • Crane Cams
  • Custom Autosound Manufacturing Inc.
  • Dakota Digital
  • Detroit Speed Inc.
  • Dynamat
  • Eaton Detroit Springs
  • Eaton Performance Products
  • Edelbrock LLC
  • FAST (Fuel Air Spark Technology)
  • Fatman Fabrications
  • Flaming River Industries
  • Hedman Performance Group
  • HushMat
  • Ididit Inc.
  • Inland Empire Driveline Service Inc.
  • Lokar
  • Meguiar’s
  • Painless Performance
  • Planet Color
  • Powermaster Performance
  • Powertrain Control Solutions
  • RideTech
  • Ron Francis Wiring
  • Royal Purple
  • Schwartz Performance
  • SEMA Business Technology Committee
  • Stainless Steel Brakes Corp.
  • Steele Rubber Products
  • Street & Performance
  • TCI Automotive
  • Vintage Air Inc.
  • Wilwood Disc Brakes

To learn more, contact Zane Clark at zanec@sema.org, visit 2012 HRIA Education Day or call 800-576-8788. See you in Indy.

HRIA Industry Leaders and Pioneers

National Street Rod Association – Street Rodding Achievement Award: Bob Drake, Bob Drake Reproductions
Goodguys Rod & Custom Association – Trendsetter Award: Mike and Jim Ring, The Ring Brothers
Championship Auto Shows/ISCA – Legends of Hot Rodding Award: Darryl Starbird
SEMA Best New Street Rod & Custom Car Product: Classic Instruments, Sky-Drive
HRIA Industry Recognition of an Individual: Craig Morrsion, Art Morrsion Enterprises
HRIA Business of the Year: MoonEyes
HRIA Hall of Fame: Ray Gollahon, Brookville Roadster

Special Thanks to our Sponsors!

Gold Sponsors:
COMP Performance Group
Goodguys Rod & Custom Association
Lokar Performance Products
National Street Rod Association

Silver Sponsors:
American Autowire
Borgeson Universal Steering Components
Championship Auto Shows/ISCA
Classic Instruments
Flaming River Industries
Hotrod & Restoration
Steele Rubber Products
Painless Performance Products
Source Interlink Media
SEIA Alliant Insurance

  no joke
  Adam and Noah Howard of No Joke Upholstery LLC.

Hot Rodder Highlight: Adam and Noah Howard, No Joke Upholstery LLC

HRIA thanks Adam and Noah Howard with No Joke Upholstery LLC for their continuous support. No Joke Upholstery is a true "cut n' sew" automotive upholstery shop. Services include but are not limited to: full custom interiors, custom motorcycle seats, leather upgrades, OEM repairs, convertible and sim-con tops and mobile electronics.

As brothers, Adam and Noah have always been intrigued by cool cars. While growing up, they basically lived at a local drag strip slot car track, which was where their roots were planted in the custom automotive world. After they graduated high school, Adam and Noah decided to start their own custom car shop. They basically asked themselves, "How hard can it be if these guys are still in business?" Well, truth be told now, it isn't easy by any means. They still feel like there is lots to learn and this motivation has helped them grow. The Howard brothers started off just selling aftermarket car parts but quickly realized that to make an impact, they would have to discover a unique niche, so they found that niche in the upholstery/trim part of the industry. The upholstery segment fit well with their mix of detail-oriented and creative personality traits.

In just nine years, Adam and Noah have received a Platinum and two Gold placings in Upholstery Journal Magazine's 2010 Design & Craftsmanship Awards. They are members of SEMA; the PRO, HRIA and YEN councils; the Mobile Electronics Retailers Association (MERA); and Industrial Fabrics Association International (IFAI).

This year’s project car is a ’27 Ford Roadster, which was displayed at the 2011 SEMA Show in true charitable fashion. “When we think of hot rods, this is what first comes to mind—the original raw and rough salt flat racers," Adam said. "This vehicle was actually our 2011 HRIA Pinewood Builders Challenge entry. We will eventually build a fullsize hot rod, but at this time, we are way too busy keeping up with all the customer projects to even think about our own.”

Have You Registered a Patent or Trademark? Your Competition Has

Protecting the intellectual property rights (IPR) of its members is a top SEMA priority. The process begins when companies register their patents, trademarks and copyrights with government agencies in the United States (and other countries). Registration is a key to establishing legal rights.

To assist its members, SEMA has created a webpage called Introduction to Intellectual Property Rights, explaining the different types of IP, including protecting new products (utility patents) and product designs (design patent), identifying the source of the product (trademarks) and protecting product brochures or website designs (copyright). It also contains information on how to register IP along with links to seminars, webinars and SEMA News articles.

With respect to enforcing IP rights at the SEMA Show, the association has developed an effective policy for pursuing infringement allegations. SEMA’s IP enforcement policy is posted on the IPR webpage and is also published as part of the Exhibitor Services Manual. Questions may be directed to Stuart Gosswein (stuartg@sema.org).

Are you on Facebook, LinkedIn or Twitter? HRIA is!

Be sure to follow HRIA on all of your favorite social networking sites. To find these sites, go to www.sema.org/hria and use the links in the top right-hand corner.

HRIA Column in SEMA Member News

Read HRIA's column featured in the November/December issue of SEMA Member News.

For more information about HRIA and how to join, contact Zane Clark or call 909/978-6696.

Back to Top


MPMC Logo
 
Visit MPMC's website.  

MPMC Robert E. Petersen Award Nominations Open

Nominations for the 2011 Robert E. Petersen Award are now open. The award is named in honor of the man to whom the motorsports industry owes so much. The award is presented to an individual from the media who has made a positive impact on the motorsports industry and the MPMC during the past year. It will be presented during the 2012 MPMC Media Reception, Tuesday, January 24, 2012, from 6:00 p.m.–8:00 p.m. at the Embassy Suites LAX South in El Segundo, California, during the MPMC Media Trade Conference.

  wolcott
  SEMA Board of Directors member Steve Wolcott of ProMedia was voted the 2010 Robert E. Petersen Award winner by the MPMC membership.

The new online form makes nominations easier and simpler than ever; no downloading, printing or faxing. If you know of a journalist or broadcaster who has gone above and beyond the call of duty to support MPMC or the motorsports industry, take a moment and submit a nomination. After nominations close December 6, 2011, a ballot will be sent to the MPMC membership for final voting.

Past winners include Steve Wolcott, Karl Fredrickson, Bill Middaugh, Ed Zinke, Dick Berggren, David Freiburger and Jeff Smith.

RSVP for MPMC Hall of Fame Ceremony at PRI

MPMC will once again hold its Hall of Fame induction at the annual PRI Trade Show, Friday, December 2, from 8:00 a.m.–9:00 a.m. in room S310 of the Orange County Convention Center in Orlando, Florida. A continental breakfast will be served. Use this online form for a quick RSVP to the MPMC Hall of Fame Breakfast.

Chuck Blum, Todd Gartshore, Rick Rollins and Nate Shelton will be honored as the MPMC Hall of Fame Class of 2011. The inductees all share the distinction of having been involved in the very formation of MPMC, as well as ongoing support of the council and its programs.

“Last year’s inaugural induction breakfast was standing-room only,” said MPMC Chairman Kyle Fickler of Weld Racing. “Thanks to Steve Lewis at PRI and Steve Wolcott at ProMedia for coordinating a larger space this year. Like last year, we’re confident that more of our core audience will be able to attend the induction at PRI than if we had it at another venue. It’s important that anyone involved in the motorsports parts manufacturing industry have the opportunity to participate.”

Are you on Facebook, LinkedIn or Twitter? MPMC Is!

Be sure to follow MPMC on all of your favorite social networking sites. To find these sites, go to www.sema.org/mpmc and use the links in the top right-hand corner.

Take a Friend to a Race Fan Page

The MPMC Motorsports Awareness campaign, highlighted by the Take a Friend to a Race program, now has its very own Fanpage on Facebook. If you’re not a fan yet, you should be!



MPMC Column in SEMA Member News

Read MPMC's column featured in the November/December issue of SEMA Member News.



For information about MPMC, contact Jim Skelly.

Back to Top


MRC Logo
 
Visit MRC's website.  

MRC Industry Leaders and Pioneers

Sales Team Annual Recognition (STAR) Award: Air Lift Company. The STAR Award is presented to an outstanding manufacturer’s sales team that promotes professional partnership with the rep community.

Hall of Fame: Skeeter Jourdan. The MRC Hall of Fame is reserved for individuals who have made significant contributions toward enhancing the professionalism, integrity and growth of the manufacturer’s rep industry.

Special thanks to our sponsors:

Bob Cook Sales
Considine Sales and Marketing
Jim Wrobleski and Co. Inc.
SS Sales and Marketing
The Kayes Company Inc.
True High Performance Sales

A Message From MRC Chair Wade Cobb

The MRC council has been chipping away at what our Long-Range Planning session of 2010 identified as a need—benefits for our membership! MRC recently put a program together with TeleNotes, offering our members a business tool to elevate their company’s ability to capture data and reporting. We are also continuing to work on travel programs, possibly offering an “MRC” rate at our industry events, such as PWA and the SEMA Show, with select lodging. We also recognized the need to reach out to our general members and non-members to determine what it is they need from MRC.

In February we conducted an online survey to 3,500 rep agencies associated with SEMA to find out more about reps and how MRC can maximize its efforts as a council to provide you with benefits. Thanks to all who took the time to respond; it’s the only way we can build a better MRC. Just as any council or association, it’s imperative to get the feedback from members on what works or needs to be fixed. As we move on reviewing the data MRC has been able to obtain through the survey and the information from our LRP, the council will continue to put action plans in place to address the concerns.

Looking to continue the efforts put forth by our members, MRC attended the MPMC Media Trade Conference held in Los Angeles this past January with the purpose of representing MRC to the manufacturers present. MRC Chair-Elect Chris Fairless and I had a MRC room all three days of the event, conducting meetings with members interested in utilizing reps and showing them the value of using rep agencies. We provided each exhibiting company with an MRC brochure and offered the MRC DVD for additional information. Both Chris and I were very pleased with the event, realizing this was a first for MRC and a great opportunity given to MRC by MPMC to explore the venue and take away ideas to build even better programs for coming events. We truly wish to thank Kyle Fickler and Vic Wood of MPMC for working with us during the MPMC Media Trade Conference.

We look forward to working with other industry segments to continue educating our fellow industry members on the benefits of utilizing a rep agency as their sales force. Your thoughts and comments are welcome any time. We need to hear your voice, so please speak out!

Are you on Facebook, LinkedIn or Twitter? MRC is!

Be sure to follow MRC on all of your favorite social networking sites. To find these sites, go to www.sema.org/mrc and use the links in the top right-hand corner.

MRC Column in SEMA Member News

Read MRC's column featured in the November/December issue of SEMA Member News.

For information about MRC, contact Zane Clark.

Back to Top


PRO Logo
 
Visit PRO's website.  

Live Demonstrations Highlight PRO Booth

If you wandered through the North Hall during the SEMA Show, chances are you regularly saw crowds of people congregated around the Professional Restylers Organization's (PRO) booth. This hub of activity was generated as the result of transforming SEMA’s own plain-Jane Ford Transit Connect into a rolling billboard promoting SEMA's councils and committees. Three times daily, Show attendees were treated to live installations showcasing vehicle wraps, graphics, paint protection and window films with the support of the following industry leaders:

transit before
transit during
transit after
Before, during and after photos of SEMA's Ford Transit Connect being transformed into a rolling billboard promoting the association's councils and committees.
  • American Tire Distributors
  • Eagle Enterprises
  • LLumar
  • Nitto Tire
  • Restylers’ Choice
  • StarShield Armor
  • 3M
  • Universal Products

PRO was able to showcase a few of the products and services that help drive the restyling segment of the specialty-equipment industry. Consistent with PRO’s goal to increase installation standards and provide additional revenue streams for its members, the live demonstrations mirror much of what occurs during the annual Technical Skills & Training Conference.

Located at Northwood University’s campus in West Palm Beach, Florida, the 2012 PRO TSTC takes place March 16, 2012. The one-day conference provides attendees with the technical know-how to become more proficient, while providing business owners and managers the opportunity to explore new business opportunities.

“TSTC is unique in that it provides both classroom and technical training. The hands-on demonstrations offered practical techniques that I could easily implement in my shop. The classroom sessions provided a deeper understanding of the products and services I could use to grow my business.”

—Howard Hughes
Howard’s Auto Body Restoration

Be proactive about growing your business. Register today at 2012 PRO TSTC.

To find out more, visit 2012 PRO TSTC or contact Zane Clark at zanec@sema.org.

PRO Industry Leaders and Pioneers

Cal Trend Automotive Products Restyler of the Year: Kevin McGowan, Auto Trim Restyling
Restyling Magazine’s Manufacturer of the Year: Rosen Entertainment
PRO Special Recognition Award: Leo Kagan
Nat Danas Person of the Year: Ron Leslie, Katzkin
Jim Borre Lifetime Achievement: Jerry Roman, Roman Empire Enterprises

Special Thanks to our Sponsors!

Platinum Award Sponsors:
Cal Trend Automotive Products
Restyling Magazine

Gold Sponsor:
Katzkin Leather

Silver Sponsors:
Advantage Truck Accessories
Check Corp.
Pecca Leather
Restylers' Choice
Roadwire Automotive Innovation

Bronze Sponsor:
SEIA Alliant Insurance

Are you on Facebook, LinkedIn or Twitter? PRO Is!

Be sure to follow PRO on all of your favorite social networking sites. To find these sites, go to www.sema.org/pro and use the links in the top right-hand corner.

PRO Column in SEMA Member News

Read PRO's column featured in the November/December issue of SEMA Member News.

For information about PRO, contact Zane Clark or call 909/978-6696.

Back to Top


SBN Logo
 
Visit SBN's website.
 

SEMA Businesswomen's Highlight

The SEMA Businesswomen's Network (SBN) is spotlighting a feature member this month. The SBN creates an avenue for women in the specialty-equipment industry by providing a circuit to enhance their professional growth and networking opportunities that will enrich the growth of the entire automotive aftermarket.

The first member to be featured is Erika Garcia, retail sales manager in the aftermarket division of

  garcia
  Erika Garcia

BOLT—a Strattec Security Corp., located in Milwaukee. The company is a supplier of automotive locks, keys and other vehicle-access products.

What is the most satisfying aspect of your job?

Getting to participate in the introduction of BOLT series locks into new markets, including truck accessories.

How long have you been involved in the aftermarket industry?


About 18 months.

What brought you into this industry?


The introduction of this new line of locks.

What are your major professional accomplishments?

I’m very proud to be the primary point of contact for our company for any external aspects related to the BOLT series locks. There is a team behind the scenes that supports me, and I give them a lot of credit for a successful launch.

Are you a member of any other organizations?


SEMA's Young Executives Network (YEN).

Who is your industry mentor?

Jerry Nuñez, manufacturer sales rep for IMS Products.

What is the best piece of advice you’ve ever received?


Smile at all times.

What would someone meeting you for the first time be surprised to learn?


I’m not only a pretty friendly face, but I’m knowledgeable about my products and the industry.

What is your dream car?


Lexus IS F.

What is your favorite pastime?


Reading.

You Ought to Be in Pictures!

The SEMA Businesswomen’s Network committee is a great resource of minds. All ladies in the specialty-equipment industry can join the SBN, so pass the word around to your colleagues and friends! We are encouraging all new and existing SBN members to log-in to the MySEMA portal to update their profile with a photo so we get to know each other's faces before the SEMA Show.

And don’t forget to turn your notifications settings “ON” so you can stay in “the loop.” Want to know more about the SBN? Interested in becoming a member?

Want to get involved in the industry but don't know how? We have an app for that! Go to www.SEMA.org, click on the Leadership tab, click on Council/Committee, click on SBN and join! Don't delay—get involved and join now. You are just a few clicks away! We look forward to "seeing" everyone!

Don’t Be Out of the Loop—Stay in Touch

The very best way to stay in touch and to read the latest news, discussions and topics posted from SEMA and the SEMA Businesswomen’s Network (SBN) is to make sure that your notification settings are turned on in your MySEMA account. Next to your photo on your MySEMA page, at the top right, is a link to the "Edit My Settings" page.

On the “settings” page, look for the “notifications” tab, where it will ask how you would like to receive your news. Check whichever method is most convenient, but either way, make sure you're in the loop by turning “on” your notifications. Visit http://my.sema.org to make sure you don’t miss a thing!

Discover the SEMA Mentoring Program—Powered by the SBN

“I’ll get by with a little help from my friends…” - Joe Cocker

Everyone needs help or expert advice from time to time, and SEMA’s Mentoring Program is an excellent resource to get answers to all your questions. Whether you need to know more about SEMA, market information for a start-up company or advice on how to approach your boss about a new position, the SEMA Mentoring Program can help.

“Ask A Mentor” is perfect for one-time questions. You can expect multiple SEMA mentors to provide online guidance and answers to your industry-related questions.

Short-term Assistance/Guidance is for help with a specific project or task. A SEMA council/committee mentor with the expertise you seek will be paired up with you to provide guidance with your project.

Long-term Relationship is helpful for developing your professional career. In this program segment you will be paired with a SEMA council/committee mentor who will provide guidance and assistance for ongoing career development or a long-term project.

So whether you just need an answer to a question or you want to cultivate a mentoring friendship, the SEMA Mentoring Program—Powered by the SBN is available to help. After all, we can all use a little help from our friends.

Visit the SEMA Mentoring Program now.

Are you on Facebook, LinkedIn or Twitter? SBN is!

Be sure to follow SBN on all of your favorite social networking sites. To find these sites, go to www.sema.org/sbn and use the links in the top right-hand corner.

SBN Column in SEMA Member News

Read SBN's column featured in the November/December issue of SEMA Member News.

For information about SBN, contact Bryan Harrison.

Back to Top



SPC Logo
 
Visit SPC's website.  
Find the Business Possibilities Through the SPC

Participate in the automotive aftermarket at a whole new level by joining the SPC.

The purpose of SEMA councils is to help our member companies succeed and prosper. In the SPC, our mission is to provide market information, education and support to our members concerning new and emerging trends. Whether it’s the latest business technology, forecasting sales, future marketing solutions or up and coming vehicle platforms, we give you and your company the chance to see what’s on the horizon.

Then we’ll help you understand and acquire the skills, tools and technologies to lead the way. The SPC has the most diverse membership of any SEMA council, and that will allow you to network with other professionals from every facet of our industry and gain insights into areas you may not have previously considered. Find out about the parts, people, technologies, strategies, trends and, most important, possibilities.

This is your chance to give something back to the industry, your profession and to grow personally along the way. Join the SPC today and become an active member of the specialty equipment and automotive market — Tracie Nuñez, Advanced Clutch Technology, SPC Chairman

Are you on Facebook, LinkedIn or Twitter? SPC is!

Be sure to follow SPC on all of your favorite social networking sites. To find these sites, go to www.sema.org/spc and use the links in the top right-hand corner.

SPC Column in SEMA Member News

Read SPC's column featured in the November/December issue of SEMA Member News.

For information about SPC, contact Bryan Harrison.

Back to Top


WTC Logo
 
Visit WTC's website

WTC Industry Leaders and Pioneers

WTC Special Recognition Award: Webster Carter
Lifetime Achievement: Ricky Guevara, Konig Motoring Accessories

Special Thanks to our Sponsors!

Platinum Sponsor:
Mickey Thompson Performance Tire and Wheels

Gold Sponsors:
Standards Testing Laboratories Inc.
Ultimate Wheel and Tire Plus Sizing Guide
Car Care One – GE Capital
SEIA Alliant Insurance
AlDI Law Group

Have you ever wondered how to get more involved in the SEMA Wheel and Tire (WTC) Council?

What exactly do the council leaders do throughout their term? Very simply, the Select Committee is elected by members of the council to serve a two-year term. They participate in monthly conference calls and meetings that are held at various trade events throughout the year. Each Select Committee member volunteers for at least 20 hours throughout the year, and some volunteer even more. Some share their experience and vision, others provide creative solutions to challenges our member companies are facing and others get their hands dirty and get it done. Each Select Committee member is supported by their company in their WTC efforts, and for that we say “thank you” to those companies!

The leaders of the WTC gathered earlier this year at SEMA headquarters in Diamond Bar, California, for its annual Long-Range Planning meeting. This meeting focused on bringing value to the WTC-member companies. The past 18 months have been extremely challenging for all of our companies and the council is dedicated to utilizing SEMA’s resources to further benefit each WTC member.

Guiding the group’s effort was the council’s mission statement to “identify common problems and opportunities relating to the wheel and tire industries that the council, as an interested body of companies, can address for the common good.” A handful of exciting objectives are being developed for the council over this year and next. If you are passionate and have an interest in being involved, there are plenty of opportunities to volunteer for a task force with a limited investment of time that provides a great way to network and share your ideas. Please reach out to the task force chair if you want to participate or have comments.

Science and Technology Task Force

Tim Dietz (Standards Testing Laboratories Inc.) and can be reached at tdietz@stllabs.com. This group focuses on aftermarket and OEM advances that affect our industry. From creating wheel standards to improved processes for tire-pressure monitoring systems and electronic stability control, the Science and Technology Task Force plays a pivotal role in the industry’s advancement.

Education Task Force
Kelly Austin (Ultra Wheel Company) chairs this group and can be reached at kelly@mail.ultrawheel.com. The education task force is charged with developing successful programs for members to enhance their businesses. The WTC Task Force is responsible for partnering with the SEMA Educational Institute to create and promote online learning resources.

Communication and Marketing Task Force

Doug Frymer (Law Offices of Douglas A. Frymer) chairs this group and can be reached at legal@starshieldarmor.com. This group focuses on membership outreach, growth and retention. It is imperative that councils effectively communicate services provided by WTC and SEMA to our members. Communication and services ensure that there is proper dialogue between leadership and membership.

SEMA Show Task Force

David Insull (American Tire Distributors) chairs this group and can be reached at dinsull@atd-us.com. The SEMA Show in Las Vegas provides the backdrop for critical networking functions. This group focuses on making WTC’s awards reception an ideal place to get together, honor one another and network with all those who share a common passion.

There are so many other things the council leadership does throughout the year. You are the expert at what your business needs and this council wants to deliver. Feel free to get in touch with us or come to one of our WTC events. Our hope is that, if you haven’t been a part of WTC yet, you will be in 2010 and beyond.

Are you on Facebook, LinkedIn or Twitter? WTC is!

Be sure to follow WTC on all of your favorite social networking sites. To find these sites, go to www.sema.org/wtc and use the links in the top right-hand corner.

WTC Column in SEMA Member News

Read WTC's column featured in the November/December issue of SEMA Member News.

For information about WTC and how to join, contact Zane Clark or call or 909/978-6696.

Back to Top


YEN Logo

Visit YEN's website

2011 SPC/YEN Awards

Three significant industry awards were given out at the 2011 SPC/YEN reception, including the YEN Vanguard Award, Young Executive of the Year Award and SPC/YEN Industry Icon award.

The YEN Vanguard Award was presented to John Hotchkis of Hotchkis Suspension. As a 20-year member of the aftermarket and current member of the SEMA Board of Directors, Hotchkis has inspired, influenced and mentored dozens of young SEMA members. He was an active YEN member, is active on Motorsports Parts Manufacturers Council (MPMC) and passionate about his work on the board. Specializing in suspension for musclecars (among the first in the industry), he founded Hotchkis Performance in 1992. Since then, he has employed dozens of young people, inspiring them all. He continues to offer internships to students in the engineering departments of several local universities, and many employees whom he hired as teenagers still work for him nearly 20 years later. He recently fought and defeated cancer and he remains an inspiration to us all.

The Young Executive of the Year Award was presented to Dan Dolan of DiabloSport Inc. Dolan worked tirelessly to promote and grow the YEN membership over the past year. His enthusiasm has been a great asset in getting the general membership more involved in YEN. He has been a positive influence in the performance aftermarket arena. Dolan is the type of person that any company would want to be represented by because of his “can-do” attitude that looks at problems as opportunities.

The SPC/YEN Industry Icon award was presented to Mike Spagnola of Street Scene Equipment. As the leader of an automotive aftermarket business, Spagnola understands the cost of doing business and the pressures that manufacturers face in all aspects of the industry. Over the past couple of years, Spagnola has served on the SEMA executive committee and governance committee, chaired the SEMA Show committee as well as the SEMA Show ‘n Shine and Gala Fundraiser efforts. In addition, he has been very active in the SEMA Cares committee and has served as the Board of Directors liaison to the Truck and Off-Road Alliance (TORA). He was honored as SEMA’s Person of the Year in 2010.

Join YEN

Did you know that the SEMA Young Executives Network has more than 500 members networking in the industry and is the largest SEMA committee? If you are employed by a SEMA-member company and are under the age of 39, then you can join the SEMA Young Executives Network for FREE. If you are interested in becoming part of the team, please visit our website at www.sema.org/yen.

YEN Member of the Month Spotlight


Did you know that YEN has a Member of the Month Spotlight on the SEMA website and that anyone can be nominated? To view previous selections or to make a nomination, visit www.sema.org/yen.

Are you on Facebook, LinkedIn or Twitter? YEN is!

Be sure to follow YEN on all of your favorite social networking sites. To find these sites, go to www.sema.org/yen and use the links in the top right-hand corner.

YEN Column in SEMA Member News

Read YEN's column featured in the November/December issue of SEMA Member News.

For information about YEN, contact Bryan Harrison.

Back to Top