Thu, 08/09/2012 - 09:33
booth vehicle
If you are looking for a booth vehicle for the 2012 SEMA Show, consider making an announcement in SEMA eNews.

If you’re looking for a vehicle for your booth, simplify your search by making an announcement in SEMA eNews. The publication is distributed to more than 100,000 industry professionals, including numerous vehicle builders and customizers.

Through an announcement in SEMA eNews, you will be able to define the type of vehicle you are looking for, helping you to reach a large number of vehicle owners and builders effectively. The vehicle builders and owners will be able to contact you directly.

To submit an announcement, you must be a 2012 SEMA Show exhibitor. Send your company's name, booth number, type of vehicle you are seeking and contact information to eNews@sema.org. Make sure to include "Seeking Project Vehicle" in the subject line of the e-mail.

More information on the SEMA Show is available at www.SEMAShow.com. Exhibitors: Access the Exhibitor Manual at www.SEMAShow.com/esm. For more information on displaying a booth vehicle, visit www.SEMAShow.com/boothvehicles.

 


Exhibitors Looking for a Display Vehicle

Direct Lift/VSG Group: Booth #10339. The exhibitor will have a four-post lift set up in its booth and would have the vehicle raised to full rise, setting on the locks for the duration of the Show. The product is black, so a nice, clean vehicle that would look nice under the lights is desired. Also looking for a motorcycle to be displayed on the company's motorcycle lift for the duration of the Show. The product is black, so a nice clean, bright-colored bike is desired. Contact: Donnie Bruther, 866-347-5438. dbruther@directlift.com.

Pittman Outdoors: Booth #30218. Toyota Tacoma 6-ft. long-bed truck to display the company's products. Only the truck bed will be used to showcase the company's air mattresses. No modifications, bolt-ons or attachments are needed. Contact: Rick Fletcher, 562-926-6660, rfletcher@truckairbedz.com.

REDI-Sensor: Booth #40276. Ford Raptor or Chevrolet or Ford 2500 or 3500 Series Pick. Contact: AnnaMaria Blose, 610-289-0488, ext. 4002. annamaria.blose@continental-corporation.com.

Thu, 08/09/2012 - 09:33
booth vehicle
If you are looking for a booth vehicle for the 2012 SEMA Show, consider making an announcement in SEMA eNews.

If you’re looking for a vehicle for your booth, simplify your search by making an announcement in SEMA eNews. The publication is distributed to more than 100,000 industry professionals, including numerous vehicle builders and customizers.

Through an announcement in SEMA eNews, you will be able to define the type of vehicle you are looking for, helping you to reach a large number of vehicle owners and builders effectively. The vehicle builders and owners will be able to contact you directly.

To submit an announcement, you must be a 2012 SEMA Show exhibitor. Send your company's name, booth number, type of vehicle you are seeking and contact information to eNews@sema.org. Make sure to include "Seeking Project Vehicle" in the subject line of the e-mail.

More information on the SEMA Show is available at www.SEMAShow.com. Exhibitors: Access the Exhibitor Manual at www.SEMAShow.com/esm. For more information on displaying a booth vehicle, visit www.SEMAShow.com/boothvehicles.

 


Exhibitors Looking for a Display Vehicle

Direct Lift/VSG Group: Booth #10339. The exhibitor will have a four-post lift set up in its booth and would have the vehicle raised to full rise, setting on the locks for the duration of the Show. The product is black, so a nice, clean vehicle that would look nice under the lights is desired. Also looking for a motorcycle to be displayed on the company's motorcycle lift for the duration of the Show. The product is black, so a nice clean, bright-colored bike is desired. Contact: Donnie Bruther, 866-347-5438. dbruther@directlift.com.

Pittman Outdoors: Booth #30218. Toyota Tacoma 6-ft. long-bed truck to display the company's products. Only the truck bed will be used to showcase the company's air mattresses. No modifications, bolt-ons or attachments are needed. Contact: Rick Fletcher, 562-926-6660, rfletcher@truckairbedz.com.

REDI-Sensor: Booth #40276. Ford Raptor or Chevrolet or Ford 2500 or 3500 Series Pick. Contact: AnnaMaria Blose, 610-289-0488, ext. 4002. annamaria.blose@continental-corporation.com.

Thu, 08/09/2012 - 09:31
Following are dates and locations for several upcoming SEMA-sponsored shows, webinars and activities. Click on an item for more details.
Wed, 08/08/2012 - 15:07
aftermarket news, automotive aftermarket news, aftermarket business
One of the best opportunities for exhibitors to promote their SEMA Show debut is by sending press release materials into SEMA's publication department.

New Product Promotion

One of SEMA's pre-Show publications is SEMA's monthly magazine—SEMA News. Though it's published year-round, in the months leading up to the Show, it's an excellent resource for Show attendees. In fact, the October issue will focus specifically on new products to be unveiled at the 2012 SEMA Show.

To be included, simply e-mail Managing Editor Carr Winn a brief description of the product and include a high-resolution image in either tif, eps or jpeg format. The deadline to send materials for consideration is August 14, 2012. Please review the following PDF for details about the word count and image size required to be included in the new product sneak peek.

For any questions about pre-Show coverage in SEMA News, please contact Carr Winn at carrw@sema.org.

Submission Policy: All submissions will be featured in pre-Show publications based on the order in which they were received on a first-come, first-served basis. In the event that the publications department receives more submissions than it can accommodate, the unpublished items will be placed on a waiting list and then included when and if additional space becomes available.

Wed, 08/08/2012 - 15:07
aftermarket news, automotive aftermarket news, aftermarket business
One of the best opportunities for exhibitors to promote their SEMA Show debut is by sending press release materials into SEMA's publication department.

New Product Promotion

One of SEMA's pre-Show publications is SEMA's monthly magazine—SEMA News. Though it's published year-round, in the months leading up to the Show, it's an excellent resource for Show attendees. In fact, the October issue will focus specifically on new products to be unveiled at the 2012 SEMA Show.

To be included, simply e-mail Managing Editor Carr Winn a brief description of the product and include a high-resolution image in either tif, eps or jpeg format. The deadline to send materials for consideration is August 14, 2012. Please review the following PDF for details about the word count and image size required to be included in the new product sneak peek.

For any questions about pre-Show coverage in SEMA News, please contact Carr Winn at carrw@sema.org.

Submission Policy: All submissions will be featured in pre-Show publications based on the order in which they were received on a first-come, first-served basis. In the event that the publications department receives more submissions than it can accommodate, the unpublished items will be placed on a waiting list and then included when and if additional space becomes available.

Wed, 08/08/2012 - 15:07
aftermarket news, automotive aftermarket news, aftermarket business
One of the best opportunities for exhibitors to promote their SEMA Show debut is by sending press release materials into SEMA's publication department.

New Product Promotion

One of SEMA's pre-Show publications is SEMA's monthly magazine—SEMA News. Though it's published year-round, in the months leading up to the Show, it's an excellent resource for Show attendees. In fact, the October issue will focus specifically on new products to be unveiled at the 2012 SEMA Show.

To be included, simply e-mail Managing Editor Carr Winn a brief description of the product and include a high-resolution image in either tif, eps or jpeg format. The deadline to send materials for consideration is August 14, 2012. Please review the following PDF for details about the word count and image size required to be included in the new product sneak peek.

For any questions about pre-Show coverage in SEMA News, please contact Carr Winn at carrw@sema.org.

Submission Policy: All submissions will be featured in pre-Show publications based on the order in which they were received on a first-come, first-served basis. In the event that the publications department receives more submissions than it can accommodate, the unpublished items will be placed on a waiting list and then included when and if additional space becomes available.

Wed, 08/08/2012 - 15:07
aftermarket news, automotive aftermarket news, aftermarket business
One of the best opportunities for exhibitors to promote their SEMA Show debut is by sending press release materials into SEMA's publication department.

New Product Promotion

One of SEMA's pre-Show publications is SEMA's monthly magazine—SEMA News. Though it's published year-round, in the months leading up to the Show, it's an excellent resource for Show attendees. In fact, the October issue will focus specifically on new products to be unveiled at the 2012 SEMA Show.

To be included, simply e-mail Managing Editor Carr Winn a brief description of the product and include a high-resolution image in either tif, eps or jpeg format. The deadline to send materials for consideration is August 14, 2012. Please review the following PDF for details about the word count and image size required to be included in the new product sneak peek.

For any questions about pre-Show coverage in SEMA News, please contact Carr Winn at carrw@sema.org.

Submission Policy: All submissions will be featured in pre-Show publications based on the order in which they were received on a first-come, first-served basis. In the event that the publications department receives more submissions than it can accommodate, the unpublished items will be placed on a waiting list and then included when and if additional space becomes available.

Wed, 08/08/2012 - 15:07
aftermarket news, automotive aftermarket news, aftermarket business
One of the best opportunities for exhibitors to promote their SEMA Show debut is by sending press release materials into SEMA's publication department.

New Product Promotion

One of SEMA's pre-Show publications is SEMA's monthly magazine—SEMA News. Though it's published year-round, in the months leading up to the Show, it's an excellent resource for Show attendees. In fact, the October issue will focus specifically on new products to be unveiled at the 2012 SEMA Show.

To be included, simply e-mail Managing Editor Carr Winn a brief description of the product and include a high-resolution image in either tif, eps or jpeg format. The deadline to send materials for consideration is August 14, 2012. Please review the following PDF for details about the word count and image size required to be included in the new product sneak peek.

For any questions about pre-Show coverage in SEMA News, please contact Carr Winn at carrw@sema.org.

Submission Policy: All submissions will be featured in pre-Show publications based on the order in which they were received on a first-come, first-served basis. In the event that the publications department receives more submissions than it can accommodate, the unpublished items will be placed on a waiting list and then included when and if additional space becomes available.

Thu, 08/02/2012 - 17:28
  aftermarket news, automotive aftermarket news, aftermarket business
Wheel, suspension, air-intake, exhaust, in-car entertainment, bedliner, grille guard and tonneau cover manufacturers are just some of the company types that participated in the recently conducted Toyota HiLux Measuring Session.
   
The first of a series of Measuring Sessions for the Toyota HiLux took place this week at the SEMA headquarters in Diamond Bar, California. SEMA imported a Toyota HiLux 4x4 double cab to the United States as part of a new program to provide SEMA members access to vehicles that are popular overseas but not sold in the United States. The session drew parts producers from across the industry, including manufacturers of wheels and tires, suspension products, engine performance enhancements, interior components and more.

All of the participants were provided time with the HiLux over the two-day session to examine the truck inside and out in an effort to gather the specs and data needed to produce HiLux parts and make them available for export.

This session and the ones to follow are made possible by a Department of Commerce Market Development Cooperator Program grant from the U.S. government, which is working in partnership with SEMA to identify and create export opportunities for SEMA members.

"I applaud SEMA for their creativity, providing access to a new vehicle of this type, enabling small- and medium-size specialty parts manufacturers to prepare for this new opportunity and to export more products to new overseas markets," said Under Secretary of Commerce for International Trade Francisco Sánchez.

The HiLux was chosen by SEMA-member manufacturers because of its popularity overseas and for the variety of opportunities it presents for specialty-equipment and accessories—ranging from off-road components and utility products to items that enhance interior comfort and convenience.

"The HiLux is widely available and accessorized overseas, but it's not sold here in the United States," stated Linda Spencer, SEMA director of international and government relations. Because of that appeal and popularity, it's the ideal vehicle for SEMA members to measure, make and prototype parts that are exportable."

Since its introduction, the HiLux has achieved nearly 14 million units sold in 135 countries worldwide. It is also a top-selling vehicle in key countries/regions, including Australia, New Zealand, Europe, South Africa, Central America and the Middle East.

"SEMA is working closely with the Department of Commerce for this session, as well as a number of other programs all aimed to help small U.S. companies export overseas," continued Spencer. "This is just the beginning, and plans for the second vehicle and subsequent measuring sessions are already in the works."

The remaining sessions are:
  • August 14 – Link Engineering Facility in Dearborn, Michigan
  • August 22 – Clemson University in Greenville, South Carolina

Register now to participate in one of the remaining 2012 Toyota HiLux Measuring Sessions. To find out more about program, contact Linda Spencer at lindas@sema.org.

For information on SEMA's international programs and services available, visit www.sema.org/international.

Thu, 08/02/2012 - 17:28
  aftermarket news, automotive aftermarket news, aftermarket business
Wheel, suspension, air-intake, exhaust, in-car entertainment, bedliner, grille guard and tonneau cover manufacturers are just some of the company types that participated in the recently conducted Toyota HiLux Measuring Session.
   
The first of a series of Measuring Sessions for the Toyota HiLux took place this week at the SEMA headquarters in Diamond Bar, California. SEMA imported a Toyota HiLux 4x4 double cab to the United States as part of a new program to provide SEMA members access to vehicles that are popular overseas but not sold in the United States. The session drew parts producers from across the industry, including manufacturers of wheels and tires, suspension products, engine performance enhancements, interior components and more.

All of the participants were provided time with the HiLux over the two-day session to examine the truck inside and out in an effort to gather the specs and data needed to produce HiLux parts and make them available for export.

This session and the ones to follow are made possible by a Department of Commerce Market Development Cooperator Program grant from the U.S. government, which is working in partnership with SEMA to identify and create export opportunities for SEMA members.

"I applaud SEMA for their creativity, providing access to a new vehicle of this type, enabling small- and medium-size specialty parts manufacturers to prepare for this new opportunity and to export more products to new overseas markets," said Under Secretary of Commerce for International Trade Francisco Sánchez.

The HiLux was chosen by SEMA-member manufacturers because of its popularity overseas and for the variety of opportunities it presents for specialty-equipment and accessories—ranging from off-road components and utility products to items that enhance interior comfort and convenience.

"The HiLux is widely available and accessorized overseas, but it's not sold here in the United States," stated Linda Spencer, SEMA director of international and government relations. Because of that appeal and popularity, it's the ideal vehicle for SEMA members to measure, make and prototype parts that are exportable."

Since its introduction, the HiLux has achieved nearly 14 million units sold in 135 countries worldwide. It is also a top-selling vehicle in key countries/regions, including Australia, New Zealand, Europe, South Africa, Central America and the Middle East.

"SEMA is working closely with the Department of Commerce for this session, as well as a number of other programs all aimed to help small U.S. companies export overseas," continued Spencer. "This is just the beginning, and plans for the second vehicle and subsequent measuring sessions are already in the works."

The remaining sessions are:
  • August 14 – Link Engineering Facility in Dearborn, Michigan
  • August 22 – Clemson University in Greenville, South Carolina

Register now to participate in one of the remaining 2012 Toyota HiLux Measuring Sessions. To find out more about program, contact Linda Spencer at lindas@sema.org.

For information on SEMA's international programs and services available, visit www.sema.org/international.