Thu, 10/01/2009 - 16:41

SEMA News - October 2009

Spy Photos

The images and information provided in “Spy Photos” are supplied by the spy shooters at Brenda Priddy & Co. “Spy Photos” are included each week in SEMA eNews, the association’s electronic newsletter. To receive your copy of SEMA eNews, e-mail enews@sema.org.


 

Ford C-Max

When it Hits: The new C-Max is scheduled to make an official debut at next year’s Paris Motor Show. U.S. production is expected to start near the end of 2011 at Ford’s Michigan Assembly plant in Wayne, Michigan.

What Priddy Says: The C-Max will be bigger than its show-car alter ego, the Iosis Max, but also a lot less exciting, and should offer a few engine options, including the recently announced 2.0L Ecoboost. Priddy also points out that sliding doors will likely make it into production, evidenced by the slider rail above the fuel-filler cap.

 
 SEMA NEWS-OCTOBER 2009-SPY PHOTOS-FORD C-MAX 

Mercedes-Benz SLS

SEMA NEWS-OCTOBER 2009-SPY PHOTOS           SEMA NEWS-OCTOBER 2009-SPY PHOTOS 
 

When it Hits: The SLS won’t be launched for nearly two years.

          What Priddy Says: Priddy’s photo network caught up with the convertible version of Mercedes-Benz’s SLS supercar. Unlike the upcoming coupe with its iconic gullwing doors, the convertible will have a more traditional entry as well as an SLR-like powered soft-top.  


Ferrari Bella

 SEMA NEWS-OCTOBER 2009-SPY PHOTOS         SEMA NEWS-OCTOBER 2009-SPY PHOTOS 
When it Hits: The Ferrari Bella is expected to debut at the Frankfurt Motor Show in September          

What Priddy Says: Ferrari has confirmed that the replacement for its F430 will be dubbed the 458 Italia. The 4.5L V8-powered prancer is reported to have the highest specific power output of any road car in the world at 127 hp per liter. Doing the math, that’s a hair over 570 hp at a screaming 9,000 rpm.

 


Audi R8 V10

SEMA NEWS-OCTOBER 2009-SPY PHOTOS     SEMA NEWS-OCTOBER 2009-SPY PHOTOS 

When it Hits: It will go on sale in Germany in the second quarter of 2009. There is no information at this time regarding a U.S. launch date.

 
    

What Priddy Says: Decked out in full production trim, including the V10 badges, the Audi R8 5.2L V10 convertible is probably the best look we’ll get at the four-ringed halo car until the expected Frankfurt auto show debut. The latest rumors suggest that the V10 powertrain may be the only one offered in the droptop, Priddy adds. 

 

Photos Copyright Brenda Priddy & Company. Reuse or reproduction without the copyright holder’s consent is prohibited.

Thu, 10/01/2009 - 16:41

SEMA News - October 2009

By The SEMA News Bureau


Each year, thousands of media attend the SEMA Show, resulting in added exposure for the exhibitors’ products and companies. Based on early media registration numbers for the 2009 Show, this year will be no exception. Media representatives from trade and consumer publications will be in attendance.

Notable television shows and news stations will also be there. Exhibitors are encouraged to begin developing and refining their message points now, as the chances of being featured in a magazine are pretty high. Just take a look at some of the coverage from last year.

Last year’s SEMA Show coverage lasted long after the Covention Center closed its doors. In fact, pictured above is just a sample of the numerous articles received by the SEMA News Bureau—titles include: Aftermarket Business, Automotive News, Diesel World, DUB, Four Wheeler, Hemmings Classic Car, Parts & People and Performance Business. Given the potential for media coverage at the 2009 SEMA Show, now is the time to get every element of your promotional campaigns dialed in. Get approval from your organization’s stakeholders for each element including press quality photos, broadcast quality videos, illustrations, campaign themes, talking points and staff schedules. With these items in hand, companies can accurately define their perfect Show.  

 SEMA NEWS-OCTOBER 2009-REQUIRED READING

 

 

 

 

Thu, 10/01/2009 - 16:41

SEMA News - October 2009

Vice President of Councils & Membership

SEMA News: Can you briefly explain your role and the role of your department at SEMA?

Nathan Ridnouer: As the vice president of councils and membership, I have the enviable job of working closely with the  association’s core membership—our councils and networks—and determining the strategic direction of the organization in terms of benefits provided to members.

 SEMA NEWS-OCTOBER 2009-INSIDE SEMA 
 Nathan Ridnouer, Vice President of Councils and Membership
  

SN: What are some of the challenges and opportunities that the association faces in terms of membership?

NR: Keeping member benefits in line with member needs. We must continue to strive to better understand our members’ needs and, in some cases, be out ahead of them in terms of what they need to help their businesses grow and prosper. In these days when companies are experiencing economic challenges, many are finding it harder to dedicate their time to organizations such as SEMA, so the association will have to change the way it delivers benefits.

Our newly redesigned website, is a great example of how products and services are being made available to our membership right at their fingertips. Members can download webinars for free instead of having to only attend the live event. Members can communicate with each other via our social networking platform built into the site or use one of our new group discussions to inquire about an innovative technology or solution for their businesses.

SN: How are the councils assisting their members in these challenging economic times?

NR: Our councils are producing innovative programs each day. Let’s take, for example, the third annual SEMA Internet Symposium that was held in Pasadena in early August as part of the association’s Leadership Days program. The more than 100 individuals who participated in this event, which was sponsored and hosted by the Street Performance Council (SPC), walked away with some of the best nuggets of information to take back to their companies and improve the way they use the Internet to enhance their businesses. They’ll not want to miss the 2010 event, where they’ll see an expanded lineup of speakers and topics.

SEMA also has a mentoring program. Thanks to the ladies of the SEMA Businesswomen’s Network (SBN), the SEMA Mentoring Program pairs our young leaders with some of the greatest minds and innovators present in today’s specialty-equipment market. In an effort to expand the program, SBN will be working with the Young Executives Network to offer mentoring to the students who will be taking part in the upcoming SEMA Show. This is one of the single best efforts made by the association to bridge the gap between a student’s transition from education to his or her professional career.

There are so many other things that our councils do—events such as our Motorsports Parts Manufacturers Media Trade Conference held each January, the Manufacturers Rep conference held during the PWA Conference each September, and the Hot Rod Industry Alliance’s Education Day at the Hot Rod & Restoration Show during the Spring. Even campaigns such as “Take a Friend to a Race” or “Take a Kid to a Car Show” demonstrate how the councils are doing their part in giving back to the businesses that support our industry.

If any of the above sounds appealing, members should check out the council efforts online or call our council staff or me to discuss how you can get engaged in SEMA volunteering through our council efforts. This truly is an exciting time!

SN: Looking forward to the 2009 SEMA Show, what activities or programs do the councils have planned?

NR: Receptions, receptions and more receptions. Based on those five words, our readers might get the impression that we simply have parties on our minds. Sure, it’s the specialty-equipment market, so we do; however, we also know how to mix business and play.

Our receptions are some of the best-kept secrets at the annual SEMA Show. During these events, our councils and networks honor the industry’s top leaders and provide the absolute best networking opportunities during Industry Week in Las Vegas. It’s where old friendships are rekindled, new friendships are made and business partnerships are cultivated. Although more than 100,000 individuals attend the annual Show, fewer than 2% have the unique opportunity to attend one of these events. Everyone should strive to be there this year.

SN: What would you say to someone who is considering membership in SEMA?

NR: Did I mention that I get to work in one of the most exciting, vibrant industries—the automotive specialty-equipment market? As a relatively new SEMA staffer (just one-and-a-half years), I’m quickly learning that those individuals who make up our membership know how lucky they are to be in this industry. As a matter of fact, many have told me that they would still be in this industry—somehow, some way—even if they worked in healthcare, agriculture or another industry unrelated to the automotive specialty-equipment market.

Long story short, people join trade associations to be around and learn from individuals who have similar interests and needs. SEMA is no different, except that we believe we have a unique offering here. In addition to world-class benefits and volunteer engagement, we have the greatest collection of industry leaders and automotive enthusiasts in one place. Not so strangely, those individuals in the healthcare and agriculture industries are car nuts, too, and we often hear from them asking, “How can I join SEMA?”

Thu, 10/01/2009 - 16:41

SEMA News - October 2009

By Linda Spencer

New European Regulations Point to Sales Opportunities Abroad

Selling product to a half billion citizens in 27 countries may have become a little easier as of May 2009 with the implementation by the European Parliament and the European Council of new, beefed-up regulations requiring member states to allow the sale and use of specialty-equipment products—and other manufactured goods—that are legally sold in one member state to also be sold within the borders of the others.

  
  SEMA NEWS-OCTOBER 2009-INTERNATIONAL
  

EC No 764/2008, as it is officially called, is expected to have the largest impact on countries that have the greatest government oversight over the industry, such as Germany and Spain, which require much more extensive testing, and in those countries that have outright banned many or nearly all specialty-equipment products, such as France and Italy.

So-called harmonized or common laws exist for a limited number of products, including exhaust systems, trailer couplings, lighting devices, automotive-related electronic products, brake linings, mirrors, bull bars, but the vast majority of optical and performance-enhancing products fall under the purview of this new regulation. Currently the sale of vehicle-modification products are often subject to quite divergent national laws and regulations.

European officials acknowledged in the passing of the recent amendments that companies routinely face unjustified barriers in exporting their products from one country to another. For example, if a U.S. company sells its products to a distributor in the UK or the Netherlands and the products conform to local law, the distributor should in theory also be able to sell the same products in Germany under the principle of mutual recognition. This is often not the case.

The new regulations are designed to combat the common practice of government officials banning or limiting the use of a product long sold in another European country without any problems through the imposition of technical regulations. The regulations now clearly state that “…a member state may not prohibit the sale on its territory of products which are lawfully marketed in another member state, even where those products were manufactured in accordance with technical rules different from those to which domestic products are subject.”

Member countries can apply for a case-by-case exemption in order to continue to require manufacturers to meet additional requirements or refrain from selling if they can prove that the product causes legitimate safety concerns. However, the burden of proof regarding the products’ safety risks shifts from businesses to the government. Moreover, a member state bears the burden of proof that the stated aim cannot be achieved by any other means.

In an important test case, a UK carbon wheel company, DYMAG, which has numerous customers in the Netherlands and the UK, sold some of its motorcycle wheels to a German consumer in Ludwigsburg, southern Germany. State officials refused to provide the consumer with a license to drive the motorcycle due to the presence of these wheels. DYMAG fought the case, and an administrative court issued a ruling on July 9 of this year in support of the consumer, noting that the state had not provided proof that the product was dangerous and thus should be banned. The court said, in part, “The long-lasting, unproblematic and accident-free use in Great Britain and the Netherlands in public road traffic and at international motorcycle racing makes such proof unlikely.” State officials are appealing the ruling.

The regulation is also designed to increase transparency regarding the free flow of goods between countries. Under the new action, member countries are required to set up points of contact from which firms can obtain, free of charge, information concerning their national technical rules and the application of the principle of mutual recognition regarding their products. The new regulation also sets out a procedure for firms to appeal a ruling by a member country.

Various differences between countries make it difficult for companies to market the same product in different member states or, at a minimum, lead to higher product development costs. These differences may be rooted in culture, language and the laws regulating the industry. While the former differences are likely to remain for the foreseeable future, the new regulations might help with the later as member countries are warned to remove unjustified obstacles to cross-border trade. The European Commission has posted information on the regulations. Contact Linda Spencer for more information.

Thu, 10/01/2009 - 16:41

SEMA News - October 2009

By Yvonne Wang

The Chinese Specialty-Equipment Market

SEMA News is interviewing top distributor/retailers in China in a series of monthly articles to introduce the larger players in the evolving specialty-equipment market in China to the magazine’s readers. The distributor chosen for this inaugural interview is Yunliang 4WD Beijing, a vertically integrated company with activities including sales and installation as well as importing and distributing products to other shops throughout China. 
  
 SEMA NEWS-OCTOBER 2009-INTERNATIONAL
 

Zhu Yunliang, founder and CEO of Yunliang 4WD Beijing.

 

Each month’s column will include information on the size of the highlighted company, insight into the types of products carried as well as additional product lines into which the firm is considering expanding. Yunliang 4WD is an off-road-segment distributor based in Beijing, China. The firm, established in 2002, has developed both a business-to-business arm as well as direct sales to consumers. The firm services more than 120 retailers with its off-road specialty-equipment products, many of which it imports directly from overseas. Consumers may also come into Yunliang’s shop to purchase and have installed a wide array of light-truck performance and accessory products. Yunliang has more than 40 employees, with a total operating facility of over 3,000 square meters.

The interview was conducted with Zhu Yunliang, founder and CEO of Yunliang 4WD Beijing.

SEMA News: What products does your company currently carry?

Zhu Yunliang: Currently, Yunliang carries distribution for the following foreign brands: PIAA, Rancho, ARB, Mopar, T-max, AEV, Delta, IPF, Monroe, Warn, BF Goodrich and Cooper Tires. The product lines are as follows:

Auto body parts: bumpers, grille guards, tubular bull bars, door handles, chrome trim decors, mud guards, mud flaps, emblems, fenders, windshield wipers, license plate accessories, other relays, switches and wiring and wheels and tires.

Lighting: driving lights, fog lights, HID lights, off-road lights and taillights (LED and halogen) and interior lighting.

Air filter and intake systems: exhaust systems, air intake snorkels and air filter replacements.

Suspension: lift kits, coil springs, shocks, struts, leaf springs, sway bars, leveling kits, arms and link suspension accessories.

Outdoor camping: tents, barbeque grills, tools and equipment for outings, backpacks, camp and trail gear, stoves, lanterns, sleeping bags and apparel.

SN: What is the most popular category of modifications among retail customers and enthusiasts?

ZY: Suspension components, lift kits, front grille bars, tires and wheels and off-road and driving lights.

SN: Please describe your typical retail enthusiast customer and how much enthusiasts are spending on average.

ZY: We have three typical customer categories. The first level of customers spend approximately $1,500 USD on a lift kit package plus a few accessories. More upscale customers typically will go for $5,000 USD on a lift kit, front and rear guards, a set of wheels and off-road tires and one or two sets of off-road or driving lights. The highest level of customers spend anywhere from $25,000 to $35,000 USD for a complete customization package, which may include a suspension kit, winches, front and rear grille bars, front and rear struts, an air compressor, air locks, front and rear leaf springs, a complete skid plate with belly-pan protectors, off-road lights, roof racks, side bars, air snorkels, bumper covers, auxiliary tanks, other exterior restyling accessories, off-road tires and wheels.

SN: What are the most modified vehicles in your installation center?

ZY: The most modified vehicles we see at our shop are Jeep-branded Wranglers and Cherokees. However, popularity is developing among the Chinese enthusiasts for the new Jeep Compass and Commander. Yunliang has specialized in Jeep products for many years and is slowly incorporating other specialty products for popular vehicle makes such as Toyota FJ Cruiser, Mitsubishi Pajero V31, V32, and V33, Toyota Land Cruiser and Nissan Patrol Y61 and Y62.

SN: What products are you looking into carrying or looking into for your distribution channel?

ZY: We look to expand our line with the latest Jeep Wrangler products, Jeep JK product lines, such as 2-, 3-, 4- and 5-inch lift kits, winches, off-road lights, snorkels, air lockers, shocks, exhaust and 17-inch wheels. In addition, Jeep Wrangler and Toyota FJ Cruiser performance modules, suspension components, heavy-duty bead-lock wheels and off-road tires.

Contact information for Yunliang as well as a recent SEMA report on the Chinese specialty-equipment market is available here. Members may also contact Yvonne Wang.

Thu, 10/01/2009 - 16:41

SEMA News - October 2009

By Joe Dysart

Quick Tips and Tricks to Add Style and Panache

The news is good for company execs who are looking to add some style and panache to their business blogs: It’s never been easier to add rich media applications such as audio and video to your blog and start reeling in more readers. Plus, even more robust options for your blog are continually rolling out, courtesy of the wunderkinds from the geek-o-sphere.
   
   
  SEMA NEWS-OCTOBER 2009-INTERNET 
  

With Artisiteer, you customize the design of your blog in minutes—no kidding.  

   
Want to build a FaceBook-style social network around your blog with a simple plug-in? No problem. Looking to custom design your blog, just the way you want it, in minutes, with absolutely no programming experience? Piece of cake.

To get you from here to there, the following roundup of the latest tools will make the ride quick, easy and ridiculously inexpensive:

Effortlessly Customize Your Blog’s Design: Lots of web design tools claim to be so simple that a six-year-old can use them. Artisteer 2.1; $129, delivers on that promise. After fruitlessly searching for months for a Wordpress blog template that was right for me, I finally came across this gem of a blog design program that enabled me to make my own template in minutes. Essentially, Artisteer enables you to start with a basic design of a Wordpress blog and then tweak it to your heart’s content with an easy-to-use dashboard. There are options to change your Wordpress blog’s shape, color, font, text size, columns, margin widths and more. And all are a point and click away.

Once you’re absolutely satisfied with your custom blog design, one click of a button exports it as a Wordpress theme that can be uploaded to your Wordpress blog server—and you’re done. Every aspect of the program is painstakingly designed for the non-techie, non-programmer. Plus, Artisteer allows the final design to be exported as a standard website or in compatible formats for web content management systems Drupal and Joomla. Very cool.

Add A Social Network: Believe it or not, newer plug-ins from popular blog platforms Moveable Type and Wordpress now enable you to create Facebook- and MySpace-type social networks right on your blog. This is a great way to elevate the community you’ve already built around your blog to a much more enriched experience. Motion for Moveable Type (keywords: Motion for Moveable Type) is probably the most business-oriented of the two social network creation tools. With Motion, you can build a Twitter-like feed into your blog, continually import new data from other social networks and/or create a micro-blog for every marketing campaign your company launches. Motion will also monitor what people are saying about your company on dozens of social networks from a single page, so you’ll always be able to respond quickly and informatively. Plus you can monitor those same social networks and display what people are saying about your brand as a kind of instant review site. Motion for Moveable Type is available free with Moveable Type Pro ($395) and Moveable Type Enterprise (call for price). It also can work alongside Wordpress or on any website.

The other major social network creation tool for blogs is Wordpress’s BuddyPress , which is offered free to all users. The only caveat is that BuddyPress is currently compatible with only Wordpress Multi-User, which is a beefed-up version of the standard Wordpress that enables users to create thousands of blogs with a single installation of the platform.

Key social networking features offered by BuddyPress include private messaging, profiles, friends, groups, activity streams and The Wire—a communications app similar to The Wall found on FaceBook. Granted, installing and running Wordpress MU and BuddyPress demand a bit more technical prowess than running a simple Wordpress blog, but if you or your company run into trouble, you can always opt for paid support, which starts at $2,500 annually.

Add an Audio Podcast: With Propaganda; $49 from Mixmeister Technology, you’ll be able to record, post and promote the audio podcast for your blog with a single program. The easy-to-use software can import audio from almost any source. And it can also help you create RSS feeds, ID3 tags and iTunes tags, which ensure that your podcast is easily accessible. After you’ve completed your recording, simply use the software’s publish feature to format in WMA, MP3 or WAV format, and then upload the podcast to your blog or to any podcast hosting service.

   
   SEMA NEWS-OCTOBER 2009-INTERNET
  

With Propaganda, you’ll be able to record, post and promote the audio podcast for your blog with a single program. 

   
Meanwhile, Wordpress bloggers will also want to check out PodPress, a free plug-in that automatically generates feeds for your podcast to RSS users, iTunes users and the like. It also simplifies the posting of a podcast to Wordpress, gives you control over how your podcast player displays within a post, and supports a wide variety of audio formats.

Moveable Type has a similar free podcasting plug-in for its users. And TypePad offers an extremely easy tutorial for adding podcasts to its blogs (keywords: TypePad add a podcast).

Add a Videocast: If there’s video up on YouTube you’d like to feature in your blog, the company offers a free YouTube player that you can embed in your blog text. For more info, check out YouTube’s how-to video on how to do the quick embed (keywords: YouTube player) as well as a separate how-to video on how to customize your player (keywords: customize YouTube player). With either option, you’ll see a faint YouTube watermark in the right-hand corner of the video.

The beauty of YouTube’s player is that the actual video footage is stored and streamed off YouTube’s servers, so your company will not pay the web bandwidth transmission costs, no matter how many people view the video. Google also offers a tool called Insight to help you analyze who’s viewing your embedded video.

Meanwhile, Wordpress offers a specially designed Wordpress Video Plug-In (keywords: Wordpress Video Plug-In) for its users, which easily enables you to embed video from dozens of video hosting sites, including YouTube.

Plus, if you’re looking to create and upload your own videos with minimal effort, check out VlogItt; $29 from Adobe. The program was specifically created to work with all popular blog programs and enables you to shoot a basic video and add customizable graphics, effects, titles, music and templates. There’s also a built-in teleprompter that facilitates video narration. Uploading your finished creation is as easy as clicking “publish” and dropping the resulting video thumbnail pix of your “vlog” into your blog edit screen. The program automatically handles all the technical details such as video compression, file transfer and the like. Plus, your blog’s readers can view the video by simply clicking on the video thumbnail that appears in your blog entry.

Add A Google Live News Feed: Google now offers a free, extremely customizable news window for your blog, known as Google NewsShow. Such news windows are a great way to ensure that your blog stays fresh, topical and continually updated. One of the best features of Google NewsShow is its specificity: Google will only display news in its NewsShow window that is directly related to the search phrase you create. Want news about Famous Vampires With Severe Hemophobia (fear of blood)? No problem. That’s what you’ll get, and that’s all you’ll get. Plus, NewsShow is a snap to create. Simply type in a few variables in the creation wizard, cut and paste the code into your blog, and voila!, you’ve got a news window, updated as news happens. I created my own NewsShow window for a blog in under two minutes.

By the way, while you’re playing in Google-land, you might as well also create a GoogleProfile (keywords: Google Profile) for your blog. Essentially, this is a quick web page that you create with a couple of variable inputs for Google, which appears high up in Google search returns. Here’s an example of the Google Profile for Google CEO Eric Schmidt. Creating the program will help in the promotion of your blog and help you better control your blog’s image in Google’s search engine returns.

Joe Dysart is an Internet speaker and business consultant based in Manhattan, New York.
Voice: 646/233-4089
E-mail: joe@joedysart.com
Website: www.joedysart.com  

Thu, 10/01/2009 - 16:41

SEMA News - October 2009

By Drew Hardin

Photo Courtesy the Source Interlink Archives

 

 

SEMA NEWS-OCTOBER 2009-SEMA HERITAGE

 
October 1964 was a busy month on the Bonneville Salt Flats. During the span of just a few weeks, the land speed record changed hands no fewer than five times. Tom Green, driving Walt Arfons’ jet-powered Wingfoot Express, set the wheels in motion with a 413.199mph record on October 5. Two days later, Walt’s younger brother Art upped the record to 434.022 mph in the Green Monster, a car he built in his Akron, Ohio, shop using a military surplus, 17,500hp GE jet engine. Here, Art’s jubilant crew helps him out of the Monster’s cockpit after a one-way run of 479.62 mph, then the fastest speed ever clocked through a measured mile on the ground. That’s chief mechanic Ed Snyder wiping the tears of joy with his
handkerchief. (We found this photo and others in a press kit generated by Firestone, which supplied Arfons’ high-speed tires.)

A week later, Craig Breedlove—the first to go 400 mph in his Spirit of America in 1963—bested Arfons’ record; and two days after that, he broke the 500-mph barrier with a 526.277mph record. It was during this attempt that Breedlove experienced the parachute failure that sent him into a salt pond at 200 mph.

Within two weeks of Breedlove’s swim, Art Arfons was back on the salt. This time, the Green Monster moved the record to 536.710 mph and clocked a one-way pass of 559 mph. But months would pass before Arfons’ record was deemed official by the FIA and the FIM, the international sanctioning bodies governing land-speed records. It took them that long to agree that vehicles did not have to be wheel-driven to hold the absolute speed record.

To this day, land-speed-racing fans make a clear distinction between Andy Green’s jet-car record of 763.035 mph set in the Thrust SSC and the wheel-driven mark of 470.444 mph held by Don Vesco’s Turbinator.

Thu, 10/01/2009 - 16:41

SEMA News - October 2009

By Megan McKernan


Growth for Businesses at the Core of the Specialty-Equipment Industry

 SEMA NEWS-OCTOBER2009-RESEARCH
 

The racing and performance market grew 4% between 2007 and 2008.
Photo: Zachary Krelle

The racing and performance component of the specialty-equipment market is comprised of three market niches: street performance, racing and compact performance. Combined, these three niches represent 32% of the total retail sales of the specialty-equipment market.

In 2008, the overall market contracted to $31 billion from $38 billion in retail sales. But the racing and performance market experienced growth. In fact, total retail sales for the three niches combined grew 4%, from just under $10 billion to $10.3 billion.

Specialty-Equipment Market

In 2008, manufacturer sales for the street performance niche reached $0.76 billion, up from $0.73 billion in 2007. Retail sales hit $2.19 billion, matching those of 2007. For the racing niche, manufacturer and retails sales experienced slight increases compared to 2007, reaching $0.37 billion and $1.11 billion respectively. The third niche that makes up the racing and performance specialty-equipment market is compact performance. This niche also experienced an increase in 2008, with manufacturer sales reaching $2.53 billion and retail sales hitting $7.03 billion compared to $6.69 billion the previous year.

The racing and performance market experienced growth. In fact, total retail sales for the three niches combined grew 4%, from just under $10 billion to $10.3 billion. 

 
 SEMA NEWS-OCTOBER 2009-RESEARCH
Performance Vehicles

In 2009, the long-awaited 2010 Chevrolet Camaro was released and Ford redesigned the ever-popular Mustang. Both of these vehicles have had a home in the racing and performance market since they were first released in the 1960s. Countless SEMA-member companies manufacture and sell products for these vehicles. And several of these companies have requested data from SEMA’s Tech Transfer program in order to streamline and expedite the process of designing their parts.

The Camaro has been in hibernation since the 2002 model year. In June of 2009, sales of the Camaro topped those of the Mustang for the first time since 1993.

When asked about the 2010 Camaro, member companies agreed that the ability to access all computer-aided design (CAD) files for the vehicle was a great help. In fact, the CAD files were available to SEMA members before the vehicle even hit the showroom floor. Companies were then able to manufacture products and have them ready upon the release of the vehicle.

“The design and development process for our SMS 620 Camaro will be the most streamlined of all of our SMS Signature Series American musclecars,” said Phil Frank, chief creative officer for SMS Supercars.

JBA Performance Headers and Exhaust released a complete line of new products for the 2010 Camaro, including shorty and long-tube headers and four different exhaust systems. The company was able to do this with the help of SEMA’s Tech Transfer program.

“JBA has always appreciated SEMA and what the organization has done for our segment of the performance aftermarket,” said Greg Raymond, sales manager for JBA.

  SEMA NEWS-OCTOBER 2009-RESEARCH
  

Member companies such as Roush Performance Products helped to make the 2010 Ford Mustang an awesome performance vehicle. 

   
Scott Johnson of Dakota Digital had this to say about the Tech Transfer and the Camaro: “The Tech Transfer program allowed us to jump way ahead of the curve regarding product design, fitment and packaging. Not only did we have our design done before the car was available to the pubic, but we had prototypes built as well—which, I might add, fit perfectly. I feel that the Camaro is going to be one of the most heavily modified cars in the specialty-equipment market in recent history. This is the perfect car for this industry at the perfect time.”

A similar statement was made by Bonnie Russell of ProjxAuto, who said: “Americans need something in the automotive market to get excited about, and I think we have it in the new Camaro.”

Two SEMA Measuring Sessions were held for the 2010 Camaro—one in Detroit and one in California. The one in Detroit was held in February 2009, a month before the Camaro was actually released for sale.

Another performance vehicle that has had a positive impact on the specialty-equipment market is the redesigned 2010 Ford Mustang. Although not a complete redesign like the 2005 Mustang, the front and rear of the vehicle were updated to give the 2010 car an even more aggressive look. The Ford Mustang has been an iconic mainstay of the street performance market since its introduction in 1964. In 2010, the Mustang will enter NASCAR for the first time, making its debut in the Nationwide Series.

A SEMA Measuring Session for the 2010 Mustang was held in Detroit in December 2008. Another was held in California in June. CAD files for the Mustang were made available to SEMA manufacturer members through the Tech Transfer program. As was the case with the Camaro files, members were extremely pleased to have this data and have parts available before the Mustang was even released. One testament to the success of this program comes from Marcello Canitano of SilverHorse Racing.

“Our use of the SEMA Tech Transfer program aids us in ensuring that the replacement products we manufacture for the Ford Mustang fit properly and exceed market expectations for fit and finish,” Canitano said. “By having the factory data, we can engineer our products to release at the same time as the new vehicle. Also, since we have the factory CAD data, we can rapidly prototype our parts in advance for testing before committing thousands of dollars to tool production.”

Access to CAD data has also helped SEMA members expand their businesses. For example, Shane Wagner of the Drake Automotive Group cited the Tech Transfer program as being responsible for the company becoming a direct supplier to Ford for new Mustangs.

“The Mustang is our core market and has been for over 25 years,” said Wagner. “We use the data to get perfect fits and verify functionality in 3D space, saving time and money. The tools at our disposal have also helped us to become a direct supplier to Ford for the 2010 and up model years.”

Unlike the Camaro, the Mustang has been on the market every year since its inception. Steeda Autosports Inc., a SEMA member and a company best known for fully outfitting Mustangs for performance, developed an open-element filter system for the 2010 Mustang that integrates with the stock air intake system. This was done in a timely and cost-effective way as a result of CAD data provided by Tech Transfer.

“The presence of the Mustang in the market really speaks for itself,” said Aric Pogel of Steeda. “The Mustang has been the vehicle of choice for performance modifications since the ‘80s, with no gap in availability. Low initial cost plus tremendous positive response to modifications makes this car very, very popular.”

The 2010 Camaro and the 2010 Mustang are expected to be well-represented at the 2009 SEMA Show. In fact, Ford is the Vehicle Manufacturer of the Show for 2009. As always, the SEMA Show will showcase racing and performance products that excite the industry and keep the market alive. Click here for a complete listing of exhibitors that will have racing and performance products on display at the 2009 SEMA Show.

The SEMA Consumer Demand Index
The July Consumer Demand Index indicated that 8% of drivers intend to purchase racing and performance products in the next three months. This is up from 7% in June and 5% in May. And it is the highest it has been in the last 12 months. Those drivers likely to purchase racing and performance products are most likely to live in urban areas of the Midwest and are most likely to be single.

The July Consumer Demand Index indicated that 8% of drivers intend to purchase racing and performance products in the next three months. 

 
SEMA NEWS-OCTOBER 2009-RESEARCH 

With assistance from TechnoMetrica, SEMA began developing the SEMA Consumer Demand Index for Performance Products and Accessories (formerly branded PADI) in January 2007. The purpose of the index is to track and help forecast U.S. consumer demand for automotive specialty and performance products, such as appearance products and accessories, racing and performance products and wheels, tires and suspension products. Download the Consumer Demand Index.

Racing and performance products are at the very core of the specialty-equipment market. When SEMA was founded in 1963 as the Speed Equipment Manufacturers Association, the founding members created an organization to represent manufacturers of racing and performance-related products. Today, of course, there are more than 7,100 SEMA-member companies, and they represent more than just racing and performance parts. However, the industry will probably always be most closely associated with its roots in speed and performance.

Thu, 10/01/2009 - 16:41

SEMA News - October 2009

By Megan McKernan


Growth for Businesses at the Core of the Specialty-Equipment Industry

 SEMA NEWS-OCTOBER2009-RESEARCH
 

The racing and performance market grew 4% between 2007 and 2008.
Photo: Zachary Krelle

The racing and performance component of the specialty-equipment market is comprised of three market niches: street performance, racing and compact performance. Combined, these three niches represent 32% of the total retail sales of the specialty-equipment market.

In 2008, the overall market contracted to $31 billion from $38 billion in retail sales. But the racing and performance market experienced growth. In fact, total retail sales for the three niches combined grew 4%, from just under $10 billion to $10.3 billion.

Specialty-Equipment Market

In 2008, manufacturer sales for the street performance niche reached $0.76 billion, up from $0.73 billion in 2007. Retail sales hit $2.19 billion, matching those of 2007. For the racing niche, manufacturer and retails sales experienced slight increases compared to 2007, reaching $0.37 billion and $1.11 billion respectively. The third niche that makes up the racing and performance specialty-equipment market is compact performance. This niche also experienced an increase in 2008, with manufacturer sales reaching $2.53 billion and retail sales hitting $7.03 billion compared to $6.69 billion the previous year.

The racing and performance market experienced growth. In fact, total retail sales for the three niches combined grew 4%, from just under $10 billion to $10.3 billion. 

 
 SEMA NEWS-OCTOBER 2009-RESEARCH
Performance Vehicles

In 2009, the long-awaited 2010 Chevrolet Camaro was released and Ford redesigned the ever-popular Mustang. Both of these vehicles have had a home in the racing and performance market since they were first released in the 1960s. Countless SEMA-member companies manufacture and sell products for these vehicles. And several of these companies have requested data from SEMA’s Tech Transfer program in order to streamline and expedite the process of designing their parts.

The Camaro has been in hibernation since the 2002 model year. In June of 2009, sales of the Camaro topped those of the Mustang for the first time since 1993.

When asked about the 2010 Camaro, member companies agreed that the ability to access all computer-aided design (CAD) files for the vehicle was a great help. In fact, the CAD files were available to SEMA members before the vehicle even hit the showroom floor. Companies were then able to manufacture products and have them ready upon the release of the vehicle.

“The design and development process for our SMS 620 Camaro will be the most streamlined of all of our SMS Signature Series American musclecars,” said Phil Frank, chief creative officer for SMS Supercars.

JBA Performance Headers and Exhaust released a complete line of new products for the 2010 Camaro, including shorty and long-tube headers and four different exhaust systems. The company was able to do this with the help of SEMA’s Tech Transfer program.

“JBA has always appreciated SEMA and what the organization has done for our segment of the performance aftermarket,” said Greg Raymond, sales manager for JBA.

  SEMA NEWS-OCTOBER 2009-RESEARCH
  

Member companies such as Roush Performance Products helped to make the 2010 Ford Mustang an awesome performance vehicle. 

   
Scott Johnson of Dakota Digital had this to say about the Tech Transfer and the Camaro: “The Tech Transfer program allowed us to jump way ahead of the curve regarding product design, fitment and packaging. Not only did we have our design done before the car was available to the pubic, but we had prototypes built as well—which, I might add, fit perfectly. I feel that the Camaro is going to be one of the most heavily modified cars in the specialty-equipment market in recent history. This is the perfect car for this industry at the perfect time.”

A similar statement was made by Bonnie Russell of ProjxAuto, who said: “Americans need something in the automotive market to get excited about, and I think we have it in the new Camaro.”

Two SEMA Measuring Sessions were held for the 2010 Camaro—one in Detroit and one in California. The one in Detroit was held in February 2009, a month before the Camaro was actually released for sale.

Another performance vehicle that has had a positive impact on the specialty-equipment market is the redesigned 2010 Ford Mustang. Although not a complete redesign like the 2005 Mustang, the front and rear of the vehicle were updated to give the 2010 car an even more aggressive look. The Ford Mustang has been an iconic mainstay of the street performance market since its introduction in 1964. In 2010, the Mustang will enter NASCAR for the first time, making its debut in the Nationwide Series.

A SEMA Measuring Session for the 2010 Mustang was held in Detroit in December 2008. Another was held in California in June. CAD files for the Mustang were made available to SEMA manufacturer members through the Tech Transfer program. As was the case with the Camaro files, members were extremely pleased to have this data and have parts available before the Mustang was even released. One testament to the success of this program comes from Marcello Canitano of SilverHorse Racing.

“Our use of the SEMA Tech Transfer program aids us in ensuring that the replacement products we manufacture for the Ford Mustang fit properly and exceed market expectations for fit and finish,” Canitano said. “By having the factory data, we can engineer our products to release at the same time as the new vehicle. Also, since we have the factory CAD data, we can rapidly prototype our parts in advance for testing before committing thousands of dollars to tool production.”

Access to CAD data has also helped SEMA members expand their businesses. For example, Shane Wagner of the Drake Automotive Group cited the Tech Transfer program as being responsible for the company becoming a direct supplier to Ford for new Mustangs.

“The Mustang is our core market and has been for over 25 years,” said Wagner. “We use the data to get perfect fits and verify functionality in 3D space, saving time and money. The tools at our disposal have also helped us to become a direct supplier to Ford for the 2010 and up model years.”

Unlike the Camaro, the Mustang has been on the market every year since its inception. Steeda Autosports Inc., a SEMA member and a company best known for fully outfitting Mustangs for performance, developed an open-element filter system for the 2010 Mustang that integrates with the stock air intake system. This was done in a timely and cost-effective way as a result of CAD data provided by Tech Transfer.

“The presence of the Mustang in the market really speaks for itself,” said Aric Pogel of Steeda. “The Mustang has been the vehicle of choice for performance modifications since the ‘80s, with no gap in availability. Low initial cost plus tremendous positive response to modifications makes this car very, very popular.”

The 2010 Camaro and the 2010 Mustang are expected to be well-represented at the 2009 SEMA Show. In fact, Ford is the Vehicle Manufacturer of the Show for 2009. As always, the SEMA Show will showcase racing and performance products that excite the industry and keep the market alive. Click here for a complete listing of exhibitors that will have racing and performance products on display at the 2009 SEMA Show.

The SEMA Consumer Demand Index
The July Consumer Demand Index indicated that 8% of drivers intend to purchase racing and performance products in the next three months. This is up from 7% in June and 5% in May. And it is the highest it has been in the last 12 months. Those drivers likely to purchase racing and performance products are most likely to live in urban areas of the Midwest and are most likely to be single.

The July Consumer Demand Index indicated that 8% of drivers intend to purchase racing and performance products in the next three months. 

 
SEMA NEWS-OCTOBER 2009-RESEARCH 

With assistance from TechnoMetrica, SEMA began developing the SEMA Consumer Demand Index for Performance Products and Accessories (formerly branded PADI) in January 2007. The purpose of the index is to track and help forecast U.S. consumer demand for automotive specialty and performance products, such as appearance products and accessories, racing and performance products and wheels, tires and suspension products. Download the Consumer Demand Index.

Racing and performance products are at the very core of the specialty-equipment market. When SEMA was founded in 1963 as the Speed Equipment Manufacturers Association, the founding members created an organization to represent manufacturers of racing and performance-related products. Today, of course, there are more than 7,100 SEMA-member companies, and they represent more than just racing and performance parts. However, the industry will probably always be most closely associated with its roots in speed and performance.

Thu, 10/01/2009 - 16:41

SEMA News - October 2009

By Alan Dicker

How Several Educational Sessions at the SEMA Show Will Help Your Business Run More Efficiently

SEMA NEWS-OCTOBER 2009-BTC 

SEMA’s Business Technology Committee is sponsoring seven seminars at the 2009 SEMA Show, beginning on Monday, November 2, 2009, from 9:30 to 10:30 a.m. in room N255-257 of the Las Vegas Convention Center.

 

Keeping with the theme of trying to do more with less, SEMA’s Business Technology Committee (BTC) is sponsoring a track of seven seminars at the 2009 SEMA Show that will help your business do exactly that through the use of technology and quality product information. The sessions are geared toward manufacturers, distributors and anyone else involved in the aftermarket distribution chain, and each is chock full of suggestions on how to make your business work smarter.

 SEMA NEWS-OCTOBER 2009-BTC 
Titled “Business Efficiency 101,” the track will kick off on Monday, November 2, 2009, from 9:30 to 10:30 a.m. in room N255-257 of the Las Vegas Convention Center (LVCC) with John Zinn of Advanced Digital Strategies presenting “Getting Your Data House in Order, Part I: We Really Want to Sell Your Products but Your Data Won’t Let Us.” The session will include a real-life case study (or should we say horror story) on a substantial brick-and-mortar retail chain that recently decided to have an online presence. Thirteen months and tens of thousands of dollars later, this website still isn’t operating because the retailer can’t get the data it needs from its suppliers. If you are a manufacturer who wants to see your products on more websites or are a retailer considering creating or expanding your website, this case study is a must see.

Immediately following that session, from 11:00 a.m. to 12:00 p.m., Bob Moore of Bob Moore and Partners will present “Getting Your Data House in Order, Part II: Data Standards 101.” A popular speaker at last year’s Show, Moore’s session is a must for anyone who is just getting started with data or is confused by all the “geek-speak” related to data and data standards. This presentation will focus on the basics of standardized product information in easy-to-follow “non-tech” speak and will show the differences between product attribute data (i.e., PIES) and catalog application data (i.e., ACES) and how both are critical to your success.

Motor State Distributing’s Scott O’Toole will present the third session of the track: “Getting Your Data House in Order, Part III: Product Attribute Data—The Path to Profits.” O’Toole will present on November 2, from 1:00 to 2:00 p.m. in LVCC room N255-257. The session aims to show you how to increase sales, lower returns and improve product exposure by formatting and managing product information required by today’s distribution channel.

Finally, those selling products based on year/make/model data should watch Gigi Ho, co-founder of Digital Performance Inc., present “Getting Your Data House in Order, Part IV: ACES Data Standards—Fit Happens.” Ho’s presentation will run from 3:00 to 4:00 p.m. on November 2 in LVCC room N255-257. Recent industry studies show that most manufacturers have major holes in their application data, meaning that they don’t catalog every application that their parts fit. This seminar will help anyone who depends on electronic catalogs to match parts to specific vehicles or engines to understand how to use industry application standards to eliminate holes and provide their customers with more accurate application data. This seminar helps explain the differences between AAIA Legacy data standards and ACES and how to get the most out of each.

Want to learn how to measure the effectiveness of your online presence from the source? Linda Boudiab and Mark Contreras, both of Google, will tell you how to “Measure the Success of Your Online Efforts with eMetrics” on November 3 from 3:00 to 4:00 p.m. in LVCC room N255-257. The speakers will help you determine who is finding your site, what pages they’re visiting and how you should react once you’ve determined the answers. This course is an eye-opener for anybody who is concerned about measuring the results of their labors.

By implementing internet parts ordering (IPO) technology, a reseller can leverage its suppliers’ inventories to offer a wider range of products while reducing inventory. You can confirm product availability and order and calculate special shipping through an electronic process in seconds while your customer is standing at the counter. IPO technology can help provide a commerce solution that any retailer, installer or distributor can use to sell more with less. SEMA’s session entitled “Offer More Products with Reduced Inventory—Welcome to IPO Technology” will take place on November 4 from 11:00 a.m. to 12:00 p.m. in LVCC room N255-257. The session covers both basics and intermediate sections of the IPO standards and process.

During the final session, “Trading Partner Connectivity—E-Hub Solutions” on November 5 from 9:30 to 10:30 a.m. in LVCC room N255-257, Steve Smith of GCommerce Inc. will explain how enabling trading partner connectivity can provide critical business information and operational efficiencies, thereby improving profitability for all, showing the business value and technology requirements at each level within the supply chain. If you need connectivity solutions to fit your needs, this seminar is not to be missed!

The sessions, part of SEMA Education Week at the 2009 SEMA Show, are free to all attendees of the SEMA Show, with no RSVPs required. For more information on the SEMA Business Technology Committee and the programs that it offers, e-mail btc@sema.org.