Thu, 08/11/2011 - 09:56

SEMA News—August 2011

Car Guys and Gals…Just Like You

With More Than 500 Members, State Legislative Caucus Continues to Thrive

New York Assemblymember Bill Reilich
New York Assemblymember Bill Reilich, pictured with his '08 Shelby GT 500, serves as the State Automotive Enthusiast Leadership Caucus chairman.
In its daily efforts to promote and protect the auto hobby, SEMA continues to partner with state lawmakers from across the country through the State Automotive Enthusiast Leadership Caucus. Celebrating its six-year anniversary, the caucus is a bipartisan group of state lawmakers whose common thread is a love and appreciation for automobiles.

Supported by SEMA’s government affairs office in Washington, D.C., the caucus is raising the motor-vehicle hobby and specialty-equipment industry’s profile in state legislatures and in the public’s eyes. Approximately 515 state legislators from all 50 states are involved in the caucus. Working in state capitals, these legislators are frequently called upon to oppose restrictive legislation that seeks to prohibit vehicle modification. Many of these legislators have also proactively sought to preserve and protect the hobby by improving existing motor-vehicle statutes and creating new programs to safeguard and expand it.

Pictured here are a few caucus members with their treasured automobiles and trucks. Here is a full listing of caucus members.

 


Kansas State Representative Elaine Bower with the ’62 GMC ¾-ton 305 big-block V6 she restored in 2009.

State Automotive Enthusiast Leadership Caucus Chairman: Assemblymember Bill Reilich (New York)

Alabama
Senator Roger Bedford
Representative Mike Ball
Representative Daniel Boman
Representative Allen Farley
Representative Victor Gaston
Representative Laura Hall
Representative Johnny Morrow
Representative Randy Wood

Alaska
Senator Fred Dyson
Representative David Guttenberg
Representative Bob Herron
Representative Kyle Johansen

Arizona
Senator Ron Gould
Senator Linda Lopez
Representative Jack Harper
Representative Nancy McLain
Representative Lynne Pancrazi
Representative Jerry Weiers
Representative Vic Williams

Arkansas
Senator Gene Jeffress
Senator Johnny Key
Senator Mary Anne Salmon
Representative Denny Altes
Representative Nate Bell
Representative Charlie Collins
Representative Linda Collins-Smith
Representative Allen Kerr
Representative Homer Lenderman

California
Senator Joel Anderson
Senator Ron Calderon
Senator Bill Emmerson
Senator Ted Gaines
Senator Bob Huff
Senator Doug LaMalfa
Senator Gloria Negrete-McLeod
Senator George Runner
Assemblymember Jim Beall
Assemblymember Felipe Fuentes
Assemblymember Martin Garrick
Assemblymember Curt Hagman
Assemblymember Kevin Jeffries
Assemblymember Tony Mendoza

Colorado
Representative Mark Barker
Representative Millie Hamner
Representative Chris Holbert
Representative Pete Lee
Representative Larry Liston
Representative Marsha Looper
Representative Nancy Todd
Representative Edward Vigil

Connecticut
Senator Scott Frantz
Senator Robert Kane
Representative Penny Bacchiochi
Representative Toni Walker
Representative Zeke Zalaski

Delaware
Representative Harvey Kenton

Florida
Representative Eddy Gonzalez
Representative Ed Hooper

Georgia
Senator John Albers
Senator Bill Heath
Senator Chip Rogers
Representative Alex Atwood
Representative Josh Clark
Representative Terry England
Representative Bob Hanner
Representative Michele Henson
Representative Calvin Hill
Representative Pete Marin
Representative Howard Mosby
Representative Alan Powell
Representative Nikki Randall

Hawaii
Senator Suzanne Chun Oakland
Representative Henry Aquino
Representative Karen Awana
Representative Jerry Chang
Representative Angus McKelvey
Representative John Mizuno
Representative Jessica Wooley

Idaho
Senator Jim Hammond
Senator Lee Heider
Senator Steve Vick
Representative Marv Hagedorn
Representative Frank Henderson
Representative Bill Killen
Representative Janice McGeachin
Representative Kathleen Sims
Representative Rich Wills


Illinois
Senator Annazette Collins
Senator John Mulroe
Senator Suzi Schmidt
Representative Adam Brown
Representative Kay Hatcher
Representative Donald Moffitt
Representative Michelle Mussman
Representative Brandon Phelps
Representative Robert Pritchard
Representative Harry R. Ramey
Representative Al Riley
Representative Dennis Rosa
Representative Jim Sacia
Representative Ron Stephens

Indiana
Senator Jim Banks
Senator Brandt Hershman
Senator Travis Holdman
Senator Dennis Kruse
Senator Sue Landske
Senator Jim Tomes
Representative Brian Bosma
Representative Bill Friend
Representative Wes Culver
Representative Bill Davis
Representative Tom Knollman
Representative P. Eric Turner

Iowa
Senator Jeff Danielson
Senator Wally Horn
Senator Joe Seng
Representative Dwayne Alons
Representative Dave Deyoe
Representative Cecil Dolecheck
Representative Jarad Klein
Representative Jim Lykam
Representative Linda Upmeyer

Kansas
Senator Mike Petersen
Senator Chris Steineger
Representative Tom Arpke
Representative Bob Bethell
Representative Elaine Bowers
Representative Tom Burroughs
Representative Terry Calloway
Representative Jim Denning
Representative Gail Finney
Representative Doug Gatewood
Representative Mario Goico
Representative Jana Goodman
Representative Carl Holmes
Representative Mitch Holmes
Representative Jim Howell
Representative Harold Lane
Representative Judith Loganbill
Representative Peggy Mast
Representative Ray Merrick
Representative Michael Peterson
Representative Don Schroeder
Representative Joe Seiwert
Representative Bill Wolf

Kentucky
Senator Joe Bowen
Senator Tom Buford
Senator Jared Carpenter
Senator Joey Pendleton
Senator Dorsey Ridley
Senator Robin Webb
Representative Thomas Burch
Representative Mike Cherry
Representative Tim Couch
Representative Ted Edmonds
Representative Keith Hall
Representative Mike Harmon
Representative Richard Henderson
Representative Dennis Horlander
Representative Mary Lou Marzian
Representative Reginald Meeks
Representative Michael Meredith
Representative Ruth Ann Palumbo
Representative Jody Richards
Representative Tom Riner
Representative Brent Yonts

Louisiana
Senator A.G. Crowe
Senator Ben Nevers
Senator Francis Thompson
Senator Mike Walsworth
Representative Jeffery Arnold
Representative Damon Baldone
Representative Girod Jackson III
Representative John LaBruzzo
Representative Anthony Ligi
Representative Nickie Monica
Representative M.J. Smiley

Maine
Senator Lois Snowe-Mello
Representative Richard Cebra
Representative Dale Crafts
Representative Les Fossel
Representative Gary Knight
Representative Thomas Longstaff
Representative Ann Peoples
Representative Kerri L. Prescott
Representative Wes Richardson
Representative Linda Sanborn
Representative Michael Shaw
Representative Jeffrey Timberlake

Maryland
Senator Barry Glassman
Senator Katherine Klausmeier
Delegate Don Dwyer, Jr.
Delegate Barbara Frush
Delegate Cheryl Glenn
Delegate Michael Hough
Delegate Benjamin Kramer
Delegate Warren Miller
Delegate Wayne Norman
Delegate Steven Schuh
Delegate Jeffrey D. Waldstreicher
Delegate Jay Walker

Massachusetts
Representative Fred Barrows
Representative Steven Howitt
Representative James Murphy
Representative Dennis Rosa

Michigan
Senator Glenn Anderson
Senator Hoon-Yung Hopgood
Senator Joe Hune
Senator Rick Jones
Senator Mike Kowall
Representative David Agema
Representative Charles Brunner
Representative Douglas Geiss
Representative Ken Horn
Representative Brad Jacobsen
Representative Rick Jones
Representative Eileen Kowall
Representative Richard LeBlanc
Representative Chuck Moss
Representative John Proos
Representative John Walsh
Representative Dale Zorn

Minnesota
Senator Michael Jungbauer
Senator Jim Metzen
Senator Carla Nelson
Senator Katie Sieben
Senator David Tomassoni
Representative Jim Abeler
Representative Paul Anderson
Representative Joe Atkins
Representative Bob Barrett
Representative Mike Benson
Representative Kurt Bills
Representative Bob Dettmer
Representative Sondra Erickson
Representative Pat Garofalo
Representative Steve Gottwalt
Representative Rick Hansen
Representative Melissa Hortman
Representative Patti Fritz
Representative Carol McFarlane
Representative Ron Shimanski
Representative Kelby Woodard

Mississippi
Senator Hillman Frazier
Representative Richard Bennett
Representative Scott Delano
Representative Roger Ishee
Representative Ken Morgan
Representative Dannie Reed
Representative Walter Robinson Jr.

Missouri
Senator Brian Nieves
Senator Mike Parson
Representative T.J. Berry
Representative Joe Fallert
Representative Tim Jones
Representative Mike Kelley
Representative Brent Lasater
Representative Thomas Long
Representative Tom McDonald
Representative Eileen McGeoghegan
Representative Jay Swearingen
Representative Don Wells
Representative Paul Wieland
Representative Billy Pat Wright


Montana
Senator Jeff Essmann
Senator Tom Facey
Senator Jon Sonju
Senator Ryan Zinke
Representative Christy Clark
Representative Gordon Hendrick
Representative Douglas Kary
Representative Steve Lavin
Representative Mike Miller
Representative Wayne Stahl

Nebraska
Senator Colby Coash
Senator Heath Mello
Senator Jeremy Nordquist

Nevada
Senator David Parks
Senator Moises (Mo) Denis
Senator Mark Manendo
Assemblymember Richard Carrillo
Assemblymember Ed Goedhart
Assemblymember John Oceguera
Assemblymember Lynn Stewart

New Hampshire
Senator Andy Sanborn
Representative Gary Azarian
Representative Gail Barry
Representative Paul Brown
Representative Gene Charron
Representative Daniel Eaton
Representative Jack Flanagan
Representative Frank Holden
Representative Robert Introne
Representative Kenneth Kreis
Representative Michael McCarthy
Representative Carol McGuire
Representative Keith Murphy
Representative Jeffrey Oligny
Representative Sherman Packard
Representative Lawrence Perkins
Representative Joe Pitre
Representative Mark Proulx
Representative Steven Smith
Representative James Webb
Representative Ken Weyler

New Jersey
Assemblymember Gary Chiusano
Assemblymember Upenda Chivukula
Assemblymember Alison Littell McHose
Assemblymember Erik Peterson
Assemblymember Charlotte Vandervalk

New Mexico
Senator Clinton Harden
Representative Jimmie C. Hall
Representative Rudy Martinez
Representative Bill Rehm
Representative Bob Wooley

New York
Senator Greg Ball
Senator Jeff Klein
Senator Thomas Libous
Senator Thomas O'Mara
Assemblymember George Amedore
Assemblymember William Barclay
Assemblymember Philip Boyle
Assemblymember Daniel Burling
Assemblymember Marc Butler
Assemblymember Nancy Calhoun
Assemblymember Robert Castelli
Assemblymember John Cerretto
Assemblymember James Conte
Assemblymember Clifford Crouch
Assemblymember Janet Duprey
Assemblymember Steve Englebright
Assemblymember Gary Finch
Assemblymember Mike Fitzpatrick
Assemblymember Dennis Gabryszak
Assemblymember Joseph Giglio
Assemblymember Andy Goodell
Assemblymember Sean Hanna
Assemblymember Steve Hawley
Assemblymember Mark Johns
Assemblymember Brian Kolb
Assemblymember Peter Lopez
Assemblymember Daniel Losquadro
Assemblymember Donna Lupardo
Assemblymember David McDonough
Assemblymember Steven F. McLaughlin
Assemblymember Marcus Molinaro
Assemblymember Mike Montesano
Assemblymember Bob Oaks
Assemblymember Edward Ra
Assemblymember Andrew Raia
Assemblymember Bill Reilich
Assemblymember Joseph Saladino
Assemblymember Teresa Sayward
Assemblymember Mark Schroeder
Assemblymember Kevin Smardz
Assemblymember Lou Tobacco
Assemblymember James Tedisco

North Carolina
Representative Kelly Alexander
Representative Marilyn Avila
Representative John Blust
Representative Larry Brown
Representative Becky Carney
Representative George Cleveland
Representative Tricia Ann Cotham
Representative William Current
Representative Bill Faison
Representative Phillip Frye
Representative Rosa Gill
Representative Kelly Hastings
Representative Julia Howard
Representative Frank Iler
Representative Tim Moore
Representative Shirley B. Randleman
Representative Mitchell Setzer
Representative Fred Steen, II

North Dakota
Senator Dick Dever
Senator James Dotzenrod
Senator Tom Fischer
Senator Judy Lee
Senator Elroy Lindaas
Representative Dick Anderson
Representative Chuck Damschen
Representative Craig Headland
Representative Jerry Kelsh
Representative David Monson
Representative Mark Owens
Representative Robin Weisz
Representative Alon Wieland

Ohio
Representative Lynn Wachtmann
Representative Kenny Yuko

Oklahoma
Senator Mark Allen
Senator Kim David
Senator David Myers
Representative Dennis Casey
Representative Scott Inman
Representative Danny Morgan
Representative Colby Schwartz
Representative Cory Williams

Oregon
Representative Jeff Barker
Representative Brian Clem

Pennsylvania
Senator Daylin Leach
Senator Tim Solobay
Senator Michael Waugh
Representative John Bear
Representative Stephen Bloom
Representative Scott Conklin
Representative Dom Costa
Representative Bryan Cutler
Representative Peter Daley
Representative John Evans
Representative Rick Geist
Representative Marcia Hahn
Representative Gary Haluska
Representative Michael Hanna
Representative Patrick Harkins
Representative Dick Hess
Representative Nick Kotik
Representative John Lawrence
Representative Mark Longietti
Representative Eddie Day Pashinski
Representative John Payne
Representative Tony Payton, Jr.
Representative Scott Perry
Representative Curt Sonney

Rhode Island
Senator William Walaska

South Carolina
Senator Larry Martin
Representative Dan Hamilton
Representative J. Gary Simrill
Representative Tommy Stringer

South Dakota
Senator Jim Hundstad
Senator Jim Putnam
Representative Thomas Brunner
Representative Elaine M. Elliot
Representative Steve Hickey
Representative Charles Hoffman
Representative Mark Kirkeby
Representative Tona Rozum
Representative Mark Willadsen

Tennessee
Representative Harry Brooks
Representative Vince Dean
Representative JoAnne Favors
Representative Craig Fitzhugh
Representative Sherry Jones
Representative Charles Michael Sargent
Representative Mike Sparks
Representative John Tidwell
Representative Joe Towns
Representative Mark White

Texas
Representative Wayne Christian
Representative Garnet Coleman
Representative Larry Gonzales
Representative Patricia Harless
Representative Charlie Howard
Representative Edmund Kuempel
Representative Sid Miller
Representative Joe Pickett
Representative Van Taylor
Representative James White

Utah
Senator Gene Davis
Senator Scott Jenkins
Senator Howard Stephenson
Representative Tim Cosgrove
Representative Gage Froerer
Representative Neal Hendrickson
Representative Gregory Hughes
Representative Curtis Oda
Representative Patrick Painter
Representative Stephen Sandstrom
Representative Kenneth Sumsion

Vermont
Senator Joe Benning
Senator Kevin Mullin
Senator Richard Westman

Virginia
Senator John Edwards
Senator Emmett Hanger
Senator L. Louise Lucas
Delegate Daniel Marshall
Delegate Mark L Keam
Delegate Sam Nixon
Delegate Dave Nutter
Delegate G. Glenn Oder
Delegate Kenneth Plum
Delegate Tom Rust
Delegate Mark Sickles
Delegate Ron A. Villanueva
Delegate Onzlee Ware

Washington
Senator Mike Carrell
Senator Jerome Delvin
Senator Jim Honeyford
Representative Mike Armstrong
Representative Jan Angel
Representative Cary Condotta
Representative Larry Crouse
Representative Bob Hasegawa
Representative Troy Kelley
Representative Ed Orcutt
Representative Marcie Maxwell

West Virginia
Senator Bob Beach
Senator Dave Sypolt
Delegate John Ellem
Delegate Ron Fragale
Delegate Gary Howell
Delegate Virginia Mahan
Delegate Cliff Moore
Delegate Harry Keith White

Wisconsin
Senator Mary Lazich
Senator Van Wanggaard
Representative Ed Brooks
Senator Glenn Grothman
Representative Steve Kestell
Representative John Nygren
Representative Roger Rivard

Wyoming
Senator Ogden Driskill
Representative Stan Blake
Representative Pat Childers
Representative Bunky Loucks
Representative Sue Wallis

 

 

 

 

 

 

 

 

 

 

 

 


Tennessee State Representative John Tidwell beside his stately Ford Model A.

 

 

 

 

 

 

 

 

 

 

 

 


Massachusetts State Representative Steven Howitt enjoying his MG.

Michigan State Representative Richard LeBlanc “cruising” in his ’67 Amphicar.


New Hampshire State Representative Gary Azarian and his vintage Corvette.


North Dakota State Senator Judy Lee in her ’11 Buick Model 21 Touring Car.


Massachusetts State Representative Mike Benson with his son and ’78 MG Midget.


Kansas State Representative Bob Bethell shows off his Mazda Miata in front of the majestic Rocky Mountains. Midget.


Arkansas State Representative Allen Kerr enjoying a fall day with his ’39 Ford Deluxe coupe.


New Hampshire State Representative Mark Proulx with his fire-fighter-inspired Mustang.


Kansas State Representative Bill Wolf and his Ford Model T.


New Mexico State Representative Bill Rehm during his stock car racing days.


New York Assemblymember Nancy Calhoun beside her Vette.


Ohio State Representative Kenny Yuko (left) with the ’31 Ford Model A he restored with his brother John (right).


Iowa State Representative Jim Lykam and his ’40 Ford Sedan.


Washington State Representative Marcie Maxwell with her husband and their ’70 Dodge Challenger convertible.


Georgia State Senator John Albers and his ’76 MGB.


California State Senator Doug LaMalfa beside his ’68 Mustang California Special.


Nebraska State Senator Colby Coash enjoying a sunny day with his yellow Corvette.


Pennsylvania State Representative John Payne at the 5th Annual Motorsports Day at the Capitol.


Pennsylvania State Representative John Payne at the 5th Annual Motorsports Day at the Capitol.


California Assemblymember Kevin Jeffries with his father, legendary builder Dean Jeffries, and the Mantaray.

 

 

 

Thu, 08/11/2011 - 09:47

 

council
Tyler Tanaka (left), of Cie Studios, and Paul "Scooter" Brothers, SEMA chairman of the Board, take advantage of the networking opportunities available at the SEMA Council Leadership Summit.
council2
SEMA council leaders shared and listened to each other's industry perspectives at the recent Council Leadership Summit.

It's hard to believe that it’s been 14 years since SEMA hosted the first SEMA Council Leadership Summit. Held this year at the Renaissance Hotel in Long Beach, California, from July 27–29, this event continues to be the one program that brings together the best and brightest rising stars in the organization’s volunteer community and industry.

For this year's theme, “Collaboration for Future Success,” SEMA introduced 19 of the council chairs and chairs-elects in an effort to help them become the best possible volunteer leaders. As part of the annual summit, the leaders are asked to take part in volunteer training, strategic planning and team building.

Throughout the two-day event, the leadership took advantage of every opportunity to network and learn from each other. Feedback from participants included:

“The event seems to have brought council synergies to the surface and, as a result, people were less territorial of ‘their council,’ which enabled transparent communication between each council.”

“I really enjoyed hearing what other leaders thought and felt my council needed most. The inside and outside perspectives were invaluable. Everyone is usually very good at identifying what others can fix and this was certainly true of each others' councils. There were great ideas brought forward for one another. I also thought that the tone was set early for people to be very open and honest this year. There was excellent sharing of real challenges and issues that are taking place within the councils and then addressing the hard choices to make in order to bring about effective change.”

Also, many attendees felt that the event brought them closer to the SEMA Board of Directors.

Several years ago, SEMA took a new approach to the event by working with the volunteer leadership to own their agendas and event outcomes. As a result, they are far more interactive in the meetings, focused on how they can better work with and learn from the other councils and utilize current SEMA programming to support their councils and vice versa.

One thing that has changed is that SEMA is asking members to work outside of their comfort zone. During training, members were asked to see the world through the eyes of other council leaders by taking five minutes to create their own pair of glasses using colorful pipe cleaners. Needless to say, the group responded with an amazing amount of creativity.

The council leadership is recognized for their many years of dedicated volunteer work for their industry trade association. Without their guidance, many programs would not be possible.

If you are interested in becoming more involved in SEMA and/or one of our eight industry segment groups and two professional networks, please contact Monica Terlouw at 909/978-6695 or MonicaT@sema.org.

council
council2
Alex Tainsh, of Parts Unlimited Inc., sees the world through the eyes of other council leaders through his homemade pair of pipe cleaner glasses. Kyle Fickler, of Weld Racing LLC, sports his own pair of pipe cleaner glasses.

 

Thu, 08/11/2011 - 09:47

 

council
Tyler Tanaka (left), of Cie Studios, and Paul "Scooter" Brothers, SEMA chairman of the Board, take advantage of the networking opportunities available at the SEMA Council Leadership Summit.
council2
SEMA council leaders shared and listened to each other's industry perspectives at the recent Council Leadership Summit.

It's hard to believe that it’s been 14 years since SEMA hosted the first SEMA Council Leadership Summit. Held this year at the Renaissance Hotel in Long Beach, California, from July 27–29, this event continues to be the one program that brings together the best and brightest rising stars in the organization’s volunteer community and industry.

For this year's theme, “Collaboration for Future Success,” SEMA introduced 19 of the council chairs and chairs-elects in an effort to help them become the best possible volunteer leaders. As part of the annual summit, the leaders are asked to take part in volunteer training, strategic planning and team building.

Throughout the two-day event, the leadership took advantage of every opportunity to network and learn from each other. Feedback from participants included:

“The event seems to have brought council synergies to the surface and, as a result, people were less territorial of ‘their council,’ which enabled transparent communication between each council.”

“I really enjoyed hearing what other leaders thought and felt my council needed most. The inside and outside perspectives were invaluable. Everyone is usually very good at identifying what others can fix and this was certainly true of each others' councils. There were great ideas brought forward for one another. I also thought that the tone was set early for people to be very open and honest this year. There was excellent sharing of real challenges and issues that are taking place within the councils and then addressing the hard choices to make in order to bring about effective change.”

Also, many attendees felt that the event brought them closer to the SEMA Board of Directors.

Several years ago, SEMA took a new approach to the event by working with the volunteer leadership to own their agendas and event outcomes. As a result, they are far more interactive in the meetings, focused on how they can better work with and learn from the other councils and utilize current SEMA programming to support their councils and vice versa.

One thing that has changed is that SEMA is asking members to work outside of their comfort zone. During training, members were asked to see the world through the eyes of other council leaders by taking five minutes to create their own pair of glasses using colorful pipe cleaners. Needless to say, the group responded with an amazing amount of creativity.

The council leadership is recognized for their many years of dedicated volunteer work for their industry trade association. Without their guidance, many programs would not be possible.

If you are interested in becoming more involved in SEMA and/or one of our eight industry segment groups and two professional networks, please contact Monica Terlouw at 909/978-6695 or MonicaT@sema.org.

council
council2
Alex Tainsh, of Parts Unlimited Inc., sees the world through the eyes of other council leaders through his homemade pair of pipe cleaner glasses. Kyle Fickler, of Weld Racing LLC, sports his own pair of pipe cleaner glasses.

 

Thu, 08/11/2011 - 09:44
brazll
Brazilian car builder Sigma and Fullpower magazine have teamed up to create a replica ’33 Chevy SEMA world car featuring SEMA-member products. It will be designed for both the street and racetrack.

Influential Brazilian consumer magazine Fullpower is looking for a few last partners for a replica ’33 Chevy project build to be featured in an upcoming edition of its magazine. The vehicle will also be displayed at the 2011 SEMA Show and will tour Brazil.

Among the products needed:

  • Disk brakes
  • 
Brake pads

  • Steering wheel

  • Valve covers

  • Cables

This program is only open to SEMA Show exhibitors. To participate in the program, send an e-mail to Eduardo Bernasconi (editorial director) at ebernasconi@editorab7.com.br.

Thu, 08/11/2011 - 09:44
brazll
Brazilian car builder Sigma and Fullpower magazine have teamed up to create a replica ’33 Chevy SEMA world car featuring SEMA-member products. It will be designed for both the street and racetrack.

Influential Brazilian consumer magazine Fullpower is looking for a few last partners for a replica ’33 Chevy project build to be featured in an upcoming edition of its magazine. The vehicle will also be displayed at the 2011 SEMA Show and will tour Brazil.

Among the products needed:

  • Disk brakes
  • 
Brake pads

  • Steering wheel

  • Valve covers

  • Cables

This program is only open to SEMA Show exhibitors. To participate in the program, send an e-mail to Eduardo Bernasconi (editorial director) at ebernasconi@editorab7.com.br.

Thu, 08/11/2011 - 09:44
brazll
Brazilian car builder Sigma and Fullpower magazine have teamed up to create a replica ’33 Chevy SEMA world car featuring SEMA-member products. It will be designed for both the street and racetrack.

Influential Brazilian consumer magazine Fullpower is looking for a few last partners for a replica ’33 Chevy project build to be featured in an upcoming edition of its magazine. The vehicle will also be displayed at the 2011 SEMA Show and will tour Brazil.

Among the products needed:

  • Disk brakes
  • 
Brake pads

  • Steering wheel

  • Valve covers

  • Cables

This program is only open to SEMA Show exhibitors. To participate in the program, send an e-mail to Eduardo Bernasconi (editorial director) at ebernasconi@editorab7.com.br.

Thu, 08/11/2011 - 09:37
September 8 is the deadline to sign up for a free listing in the 2011–2012 SEMA International Buyers' Guide. Use this online form to promote your company in this directory, which is provided to international buyers at the 2011 SEMA Show and year-round at major overseas trade shows. This benefit is available only to 2011 SEMA Show exhibitors. For more information, contact Linda Spencer at lindas@sema.org.
Thu, 08/11/2011 - 09:37
September 8 is the deadline to sign up for a free listing in the 2011–2012 SEMA International Buyers' Guide. Use this online form to promote your company in this directory, which is provided to international buyers at the 2011 SEMA Show and year-round at major overseas trade shows. This benefit is available only to 2011 SEMA Show exhibitors. For more information, contact Linda Spencer at lindas@sema.org.
Thu, 08/11/2011 - 09:01

 

china
The SEMA delegation outside the Great Hall of the People in September 2010. This year’s participants will also have dinner with key automotive executives and government officials at the Chinese equivalent of the U.S. Capitol building.

The August 19 deadline to sign up for the 2011 SEMA China International Auto Parts Expo (CIAPE) China Business Development Conference, September 7–10, 2011, in Beijing, is just one week away. Devote three days to learning about the growing specialty-equipment market in the world’s most populous country.

Join a group of SEMA-member manufacturers heading to China to spend a day with Chinese distributors and retailers from 20 cities throughout China. Trip participants will also have dinner at the Great Hall of the People (similar in function to the U.S. Capitol building), VIP access to a large automotive parts trade show (CIAPE), spend time with top automotive press and receive a briefing with U.S. government officials.

For more information, contact Linda Spencer at lindas@sema.org or visit www.sema.org/china.

Thu, 08/11/2011 - 08:52

SEMA News—August 2011

2011–2012 SEMA Legislative/Regulatory Priority List

PRIORITY ISSUES: STATE

Vehicle Equipment Standards and Inspections: State policy makers continue to revise and update equipment and inspection standards—often with a bias toward the vehicle manufacturer’s original equipment, such as lighting, tires and wheels, suspension components and bumper/frame height. SEMA opposes arbitrary and unnecessarily restrictive equipment and inspection procedures.

  Scrappage programs accelerate natural vehicle retirement by allowing for the purchase of older cars from owners.
   
Accelerated Vehicle Scrappage: Under pressure from the U.S. Environmental Protection Agency (EPA) to develop clean-air plans, a few states have considered including vehicle scrappage programs in their state implementation plans. Scrappage programs accelerate natural vehicle retirement by allowing for the purchase of older cars from owners. These vehicles are then typically crushed into blocks of scrap metal. SEMA opposes scrappage proposals. Where proposals can’t be defeated, SEMA seeks to amend them to protect collector vehicles, focus on gross polluters, use measured emissions values, allow parts recycling and include repair/upgrade alternatives.

Emissions Testing and Maintenance Programs: States have incorporated the Onboard Diagnostics (OBD) testing method as part of the vehicle emissions inspection for ’96 and newer vehicles. These OBD tests replace tailpipe tests by identifying emissions problems through information stored in the vehicle’s onboard computer system. I/M 240 tests require visual inspection of emissions-control devices, an evaporative emissions test and a transient drive-cycle exhaust emissions test performed while the vehicle is running on rollers.

Many of these state programs mistakenly fail vehicles based on the presence of aftermarket engine products, some of which are required to be tested, certified and labeled (e.g. California Air Resources Board (CARB) Executive Orders) as not increasing emissions. Others force older collector vehicles and newer vehicles to undergo some type of testing, the results of which demonstrate no significant threats to air quality from these vehicles.

The idea behind exempting older and newer vehicles of all classes is to reduce costs while not losing appreciable emissions reductions. SEMA supports programs that properly focus inspection procedures and do not confuse legitimate aftermarket parts with emissions-defeat devices and state and federal tampering violations. SEMA also supports proactive legislative initiatives to establish exemptions from inspections for low-mileage vehicles, classic vehicles (defined as 25 years old and older) and newer vehicles.

Greenhouse Gas Emissions/Engine Size/MPG: SEMA opposes legislation that imposes an added fee, surcharge or tax on the sale or lease of a new passenger motor vehicle based on carbon emissions, engine size or fuel-economy rating. These measures could affect a consumer’s ability to purchase the vehicle of choice and consequently vehicle safety. SEMA also opposes added yearly registration and renewal fees based on carbon emissions, engine size or fuel-economy rating.

  vehicle suspension and height regulations are often so unclear that the industry, motorist and inspection technician have no clear guidance
   
Vehicle Suspension and Height Regulations: Modifications that affect vehicle suspension and steering as well as those changing the vehicle’s frame and/or bumper height continue to draw attention from regulators and legislators. Many state regulations are more restrictive than necessary. Others discriminate against aftermarket parts manufacturers and their customers by allowing the vehicle manufacturers to effectively set the frame and bumper-height standards. In addition, vehicle suspension and height regulations are often so unclear that the industry, motorist and inspection technician have no clear guidance. SEMA opposes state regulations targeting suspension and height modifications without regard to reasonable and useful modifications.

Specialty Vehicle Titling and Registration: Special titling and registration designations for specialty cars, including antique, street rod, custom, classic, collector, modified, replica and kit-car vehicles, have led to an easing of certain equipment standards and exemptions from stringent emissions testing.

SEMA supports initiatives that allow for the use of non-original materials and create a titling and registration criterion that assigns these vehicles the same model-year designations as the production vehicles they most closely resemble. SEMA supports initiatives to establish distinctive license plates and separate vehicle code definitions for these cars to allow special consideration during emissions testing and equipment inspections. SEMA supports initiatives to create classic motor-vehicle project titles that apply to vehicles undergoing restoration that are at least 25 years old, are not roadworthy and are currently without a title or with a title from another state.

SEMA supports initiatives to establish minimal one-time registration fees for specialty vehicles and opposes efforts to disproportionately increase registration fees and taxes for these cars based on state budget deficiencies. SEMA also supports legislation that allows vehicles with these special registrations to be driven for a variety of purposes, including occasional transportation, exhibitions, club activities, parades, tours and similar uses.

Lighting Equipment: Some states apply an approach to optional and auxiliary lighting equipment that essentially prohibits all such lights if not specifically permitted in the regulations. Poorly written legislation and regulations can confuse the issues of a clear safety hazard versus consumer demand for legitimate and safe lighting enhancement. Regulators are also scrutinizing blue-hued headlamps, some of which the federal government has declared legal for operation on the nation’s roadways, for excessive glare. Government officials are also concerned about non-compliant high-intensity-discharge headlamp conversion systems, clear taillamp covers, marker lamps and bulbs. SEMA opposes any use limitations or prohibitions on optional lighting equipment or accessories not related to a proven safety hazard.

Tire Fuel Efficiency: SEMA opposes separate state legislation requiring the development of a program to mandate that replacement tires for passenger cars meet fuel-efficiency standards. These state replacement tire-efficiency programs are anti-consumer, anti-small business and require substantial appropriations. Most importantly, state replacement tire efficiency programs often conflict with a federal program to create a “consumer information system” to rate the fuel economy, safety and durability characteristics of most replacement tires. The program includes a SEMA-drafted exemption for limited production tires (15,000 units or less in a tire line or 35,000 tires in total brand-name production) that are mostly tires for classic and antique vehicles or off-highway vehicles.

 
   
Tire Aging: SEMA opposes state legislation to limit the distribution or sale of tires based strictly on age. No auto industry, tire industry or federal government data has determined that tires fail to perform when they reach a particular chronological age. Proposals to outlaw tires based on age distract consumers from focusing on qualities proven to enhance safety, such as the tire’s handling and performance characteristics. The legislation also imposes unnecessary regulatory burdens on tire manufacturers and retailers while filling state landfills with tires that retain useful life.

Window Tint: Severe limits on window-film light transmission and reflectance percentages continue to surface in a number of states. SEMA supports advancement of the industry standard of not less than 35% light transmittance on all windows other than the windshield.

Inoperable Vehicles: SEMA opposes legislation that allows state, county or local officials to confiscate inoperable project vehicles or those vehicles in need of repair from private property.

Exhaust Systems: SEMA opposes legislation or regulations that unfairly discriminate against modified exhaust systems and apply arbitrary enforcement standards relative to muffler noise limits. SEMA supports efforts to reduce improper citations and encourage modifications that comply with applicable state regulations.

Nitrous-Oxide/Performance Enhancers: SEMA opposes legislation that bans the installation of power booster systems, including nitrous-oxide systems intended for off-road use.

 
   
Street Racing: SEMA supports efforts to abolish illegal street racing through focused legislation designed to incentivize drivers to pursue racing activities at legal racing venues. SEMA opposes anti-street-racing legislation that unfairly targets owners of legally modified vehicles for enhanced scrutiny, title branding and additional fees.

Due to the popularity of sanctioned racing events on closed streets in downtowns across the country and the current urgency to generate tourism and revenue, states are beginning to introduce legislation to provide for municipal racing. Known as “municipal racing acts,” these bills include provisions to limit local government liability and allow permits to be issued to race promoters to host Grand Prix-style events on public roads and highways. SEMA supports the promotion of the racing industry through such legislative action.

Alternative Fuels/Greenhouse Gases: SEMA opposes legislation that would unreasonably restrict opportunities for the aftermarket to continue providing performance equipment. SEMA supports such initiatives where opportunities exist to expand market opportunities for SEMA-member products.

Ethanol-Blended Gasoline Labeling Requirements: Each state sets its own labeling requirements for ethanol-blended gasoline, with 12 states and the District of Columbia currently not requiring pumps dispensing such blends to display labels. Ethanol increases water formation in the fuel system, especially when the vehicle sits over a period of time. Under these conditions, formic acid is created, which corrodes metals, plastics and rubber. This can lead to engine/parts failures and, potentially, safety hazards. Many products in the marketplace, including older cars, use materials that are incompatible with ethanol.

SEMA supports labels on fuel pumps dispensing ethanol-blended gasoline as important to consumers, especially those with classic cars and performance automobiles, who want to know what they are putting into their vehicles. There is a new urgency for more precise labeling due to the recent EPA approval of E15 for use in ’01 and newer light-duty vehicles, since owners of pre-’01 vehicles need to be able to distinguish between E10 and E15.

PRIORITY ISSUES: FEDERAL

Clean Air Act Amendments (CAAA): The EPA continues to revise and update rules authorized by the 1990 CAAA. Recent examples include setting stricter standards for ozone and particulate matter, volatile organic compounds emissions and hazardous air pollutants. SEMA opposes any revisions that are unnecessarily restrictive or do not balance economic and small-business considerations.

CAAA Revisions: SEMA supports revising the CAAA to require cost-benefit rationales for rulemakings, a scientific basis for regulations and periodic reviews of existing rules. SEMA also supports implementation procedures that reduce future court battles (citizens’ suits, consent agreements, etc.).

Compensatory Time for Overtime: SEMA supports legislation that would give workers a voluntary choice between overtime pay and compensatory time off, accruing at 1½ hours for each hour of overtime. Unions generally oppose the legislation for fear that workers will be coerced to take leave in lieu of pay.

Corporate Average Fuel Economy (CAFE) Standards: SEMA supports CAFE standards that take into account the impact on jobs, safety, consumer choice and technological feasibility. Drastically increased CAFE potentially limits consumer choice if manufacturers are forced to make smaller, less powerful and less useful cars and light-duty vehicles in order to meet government fuel-economy demands. SEMA supports market-based solutions that allow the consumer to participate in and respond to national energy policies.

Ergonomics Standard: SEMA supported repeal of the Occupational Safety and Health Administration’s (OSHA) ergonomics standard in 2000. The controversial rule imposed onerous compliance requirements on businesses to protect workers from musculoskeletal disorders, such as repetitive-motion injuries, commonly referred to as “ergonomics injuries.” SEMA supports OSHA’s subsequent approach to provide voluntary guidance materials for addressing ergonomic problems.

Ethanol Content in Gasoline: SEMA opposes the EPA’s waiver to permit the sale of gasoline containing 15% ethanol (E15) for model-year ’01 and newer vehicles. SEMA has consistently voiced concern that ethanol increases water formation, which can then create formic acid and corrode metals, plastics and rubber, placing older cars and certain high-performance specialty parts at risk. The EPA waiver would not protect consumers from misfueling these vehicles.

Gas Taxes: Lawmakers are considering legislation to address the nation’s dependency on foreign oil and reduce carbon dioxide emissions. Proposals include establishing a carbon tax, taxing motorists based on miles traveled and using feebates as an incentive toward purchasing fuel-efficient cars. While SEMA opposes such tax hikes, SEMA supports policies that balance the interests of the business community with reasonable means to reduce reliance on foreign oil and create incentive-laden programs to help clean the air.

Greenhouse Gas Emissions/Global Warming: The primary greenhouse gas is carbon dioxide (CO2), which is released in direct proportion to the amount of carbon-based fuel that is burned. SEMA supports regulating CO2 emissions from automobiles through the CAFE standards. This approach also has the benefit of establishing a national standard rather than a patchwork of state rules.

With respect to stationary source emitters, SEMA supports a congressionally defined limited approach to regulate the largest stationary source emitters, such as powerplants, factories and refineries. The automotive specialty-equipment market is also part of the solution, since it is a leading innovator for products designed to address technological challenges, such as greenhouse gases.

Health Care: SEMA has consistently advocated for legislation providing small businesses with access to a pool of insurance plans, whether offered through trade associations or government agencies. The health-care law enacted in March 2010 contains SEMA-supported “exchanges,” which will offer small businesses access to a variety of competitively priced plans. While this is beneficial, the law is also limited and flawed (e.g., mandates on larger companies and not enough cost controls). SEMA remains committed to pursuing additional meaningful reforms to health-care policy.

Independent Contractors: Defining whether an individual is an “employee” or an “independent contractor” impacts whether a business withholds income tax and the employee’s share of the FICA tax, pays an employer share of FICA as well as many other issues. An imperfect 20-point test for defining classifications has emerged following decades of court decisions and IRS rulings. SEMA supports simplified worker classification rules, since the current rules are too complicated, confused and subjective.

Intellectual Property Protection: Assisting SEMA members in protecting intellectual property rights (IPR) is a top priority for the association. SEMA is taking steps through webinars, seminars and SEMA News to ensure that its members are better informed on understanding the value of IPR (trademarks, patents, copyright, etc.) and how to properly protect them. SEMA’s IPR enforcement rules at the SEMA Show have been effective and well received. SEMA actively supports IPR legislation in the U.S. Congress and government enforcement activities through the Coalition Against Counterfeiting and Piracy.

Minimum Wage: SEMA supports policies that allow wages to be set by the marketplace. If a wage hike is contemplated, SEMA maintains that tax relief targeted at small businesses should be considered in order to balance the impact of the wage hike.

Onboard Diagnostics and Service Information Sharing: SEMA and certain OEMs have established partnerships for sharing technology information. Increased sales of SEMA-member products should also translate into more vehicle sales. SEMA is working with other automakers to forge similar service information-sharing partnerships.

Parental Leave: SEMA opposes any attempt to expand the Family Leave Act but supports legislation that would clarify certain aspects of the law.

Product Liability and Legal Reforms: SEMA supports sensible legal reforms. This includes bills to develop uniform standards of liability, take small-business size into consideration, alter rules pertaining to punitive and non-economic damages, discourage frivolous lawsuits and restore credibility to the judicial system.

Public Land Access and Use: Threats to OHV access typically take form in legislation passed by Congress or regulations issued by the U.S. Forest Service, Bureau of Land Management or other federal and state agencies. The actions threaten recreational access, designate lands as “wilderness” (roadless) or unnecessarily close lands to protect endangered species. Public land access issues are of keen interest to off-roaders and the SEMA-member companies that market products to those groups. SEMA supports land-use decisions that are reasonable and enjoy local community support.

Regulatory Reform: The current regulatory climate is adversarial, focusing more on detecting violations than with helping the regulated communities solve problems. SEMA supports efforts to permit more flexibility in achieving standards, consider more cost-effective ways to meet goals, require cost-benefit rationales for rulemakings, require scientific basis for regulations and require periodic review of existing rules. In addition, President Obama recently issued an Executive Order directing all federal agencies to review their regulations in an attempt to eliminate rules that hinder economic growth.

Retirement Savings Plans: An estimated 70% of those working for small businesses are not covered by retirement plans. There are many reasons for this: revenue is too uncertain; administrative costs are too high; there is too much paperwork and government regulation; and required company contributions are too severe. Many small businesses cite reduced administrative rules, business tax credits and eased vesting requirements as necessary conditions for starting a plan. SEMA supports legislation that helps defer the costs of a retirement program, provides guidance in plan construction and establishes clear regulations to govern the program.

Rollover: SEMA supports performance-based initiatives that are cost-effective and technologically feasible to reduce vehicle rollovers. SEMA has developed a program to help member companies identify how a product may interact with the vehicle’s electronic stability control (ESC) system that addresses vehicle rollover.

Tax Policy: SEMA supports small-business tax relief through reduction and simplification of business taxes and a federal budget that promotes productivity. Tax cut examples include establishing a reasonable estate tax, extending tax credits for research and development and raising the alternative minimum tax. SEMA has not taken a position on the imposition of state sales/use taxes on sellers that do not have nexus in that state.

 
Vehicle Scrappage Legislation: For two decades, SEMA convinced federal lawmakers that vehicle scrappage programs are not cost effective and unnecessarily remove older vehicles from the marketplace. Responding to a global recession, lawmakers established a “cash for clunkers” program in 2009 to help spur car sales. SEMA helped lessen the impact of the program on the automotive specialty-equipment market by including a restriction that scrapped cars be less than 25 years old and by allowing the transmission to be recycled along with all other parts except the engine. SEMA will continue to oppose any future scrappage programs, especially those that simply target old cars and exclude recycling/repair/retrofit provisions.

Vehicle Equipment Standards: The federal government, through the National Highway Traffic Safety Administration (NHTSA), maintains the right to set, enforce and investigate safety performance standards for motor vehicles and motor-vehicle equipment. Many NHTSA regulations, such as the Federal Motor Vehicle Safety Standards, have a direct effect on how specialty equipment is produced and marketed and how customers use the products. SEMA supports regulations that are necessary, practical and based on performance rather than on design criteria. SEMA uses the same criteria when supporting or opposing legislation to expand NHTSA mandates.