Mid America Motorworks Names Michael Furman Call Center Director
Mid America Motorworks hired Michael Furman as its call center director. Prior to joining Mid America Motorworks, Furman was the director of call center operations at Rosetta Stone. According to Mid America Motorworks, Furman has an extensive background in the call center environment, bringing knowledge of managing, training, developing and motivating call center teams to the company. He has actively developed and implemented programs to improve call center efficiency and has worked with call centers on domestic and international training.

The California Tire Dealers Association's new board of directors. From left: Billy Eordekian, president; Ejnar Fink-Jensen, executive director; and Chris Barry, vice president.

California Tire Dealers Association – North, South Announce Merger
The California Tire Dealers Association (CTDA) – North and the California Tire Dealers Association – South have officially merged as of July 1. The association’s new name—California Tire Dealers Association—was accepted and approved by the Secretary of State. The California Tire Dealers Association released the following statement: "Our newly joined board members are enthusiastically moving forward with changes that will positively impact our association. In an effort to promote “oneness” in such a large and diverse state, a rotating regional meeting schedule will be planned for 12 distinct geographical areas."

In addition, each region will be represented in the CTDA newsletter’s "Regional Roundup" section with reports from board members. A new Board of Directors was also established: President, Billy Eordekian, 1-800EveryRim.com; Vice President, Chris Barry ITDG (Independent Tire Dealer Group); Secretary/Treasurer, Don Zavattero Tech Supply Inc.

RK Motors Charlotte, Adam’s Premium Car Care Products Offer Free Automotive Seminars
RK Motors Charlotte will team up with Adam’s Premium Car Care Products to offer two free informational, automotive seminars Saturday, July 23. Adam’s Richard Kashinsky will give demonstrations to automotive enthusiasts and collector-car owners at RK Motors Charlotte’s main showroom, located on its 75,000-sq.-ft. campus in Charlotte. The first clinic of the day is scheduled at 11:00 a.m. (EDT) and the second at 2:00 p.m. Each free clinic will last between 60 and 90 minutes. RK Motors Charlotte and Adam’s Premium Car Care Products will provide complimentary refreshments, discounted Adam’s products and a chance to ask questions directly to the experts during the two free clinics. To learn more, visit www.RKMotorsCharlotte.com or call 704/596-5211.

Quarter Mile Foundation Adds 16 East Coast Drag Racing Legend Interviews
Quarter Mile Foundation secured interviews of 16 East Coast drag-racing legends for Project 1320 at the 10th Annual Musclecar Madness at the York Reunion (US 30 Dragway) on July 8–9, 2011.The interviews covered some of the stars of the formative years of the sport in what today is considered NHRA’s Division 1, as well as the extreme northern portion of Division 2 (Southeast Division). The interviews touched on the East Coast Gasser scene, as well as Fuel Altereds, Top Fuel, Super Stock, Pro Stock and A/FX-Funny Cars of the late ’50s through the early ’80s. The interviewees were: Ken Montgomery (“555” (aka “Triple Nickel”) ’65 Plymouth Satellite SS); Jim and Alison Lee (TF owners – “Great Expectations”); Bud Faubel (Dodge Dart “Hemi Honker” A/FX); Wally Bell (Pro Mod Pioneer); Bill “Grumpy” Jenkins (Dave Strickland Chevy Impala Z-11 “Old Reliable” SS, “Grumpy’s Toy” Chevy Vega/Camaro PS); Jack “JA” Redd (East Coast track announcer); Carol “Bunny” Burkett (“Bunny & The Boys” FC); Darwin Doll (NHRA Division 1 Director); Kenny Warren (“Virginia Twister” Dodge Challenger A/FX); Tom Raley (Driver, Jim and Alison Lee “Great Expectations” TF cars); George Snizek (Pacer’s Auto “Tasmanian Devil” AA/Fuel Altered); Dick Estevez (Driver/Crew Chief for Phil Bonner’s “Daddy Warbucks” Racing Ford Falcon A/FX); Tom Sneden and David Reitz (Bob Banning Dodge Challenger FC); Fred Bear (S&S Team ’40 Willys B/G Gasser).

 

	Phil and Debbie Becker's Mustard yellow ’32 3-Window Coupe was named the Goodguys 2011 Classic Instruments Street Rod of the Year.

’32 3-Window Coupe Named Goodguys 2011 Classic Instruments Street Rod of the Year
Phil and Debbie Becker's Mustard yellow ’32 3-Window Coupe took home the Goodguys 2011 Classic Instruments Street Rod of the Year award at the Goodguys 14th PPG Nationals presented by Bridgestone in Columbus, Ohio. The coupe was crafted by Dave Lane of Fastlane Rod Shop. According to the Goodguys, Lane is a throwback to the European coach builders of the 20th century who has a unique build style, he only takes on one car at a time and he hires no outside help. The entire build took just shy of two years. The top five finalists for the Goodguys 2011 Classic Instruments Street Rod of the Year included Dave & Sue Doll, Humphrey, NE (1932 Ford), Butch Downs, Colona, IL (1934 Hupmobile), Rodney Harris, Leighton, AL (1932 Ford), Phil & Debbie Becker, Dwight, IL (1932 Ford) and Dale Johns, Van Buren, AR (1933 Ford).

McCullough Public Relations Inc. Named PR Firm of Record for STRATTEC Security Systems
McCullough Public Relations Inc. was selected as the public relations firm of record for STRATTEC Security Systems, a manufacturer of automotive locks and keys headquartered in Milwaukee, Wisconsin. McCullough will be responsible for all public relations activities for STRATTEC and its brand of BOLT locks, including press release writing, feature story coordination, media relations, product placement, on-site trade show representation and organizing company media events.

Exhibitors planning to make a newsworthy announcement that would appeal to a wide range of media may want to consider conducting a press conference at the 2011 SEMA Show.

Exhibitors planning to make a newsworthy announcement that would appeal to a wide range of media may want to consider conducting a press conference at the 2011 SEMA Show.

With more than 2,500 members of the media expected to attend the 2011 Show, a press conference can be the ideal solution for communicating news to several reporters quickly and efficiently. For complete details or to schedule a press conference, access the form in the Exhibitor Manual. Under the “Marketing, Advertising & Sponsorships – Opportunities to Promote Your Booth” section on the right side, select the “Media/Press Conference Application” link. From there, enter your exhibitor company name and follow the step-by-step instructions.

All press conferences are scheduled by SEMA and included in an official schedule that is promoted to the media. The deadline for exhibitors to submit a press conference application is September 2, 2011. There is no cost to hold a press conference.

For questions or additional information, contact pr@sema.org or call 909/978-6723.

Exhibitors planning to make a newsworthy announcement that would appeal to a wide range of media may want to consider conducting a press conference at the 2011 SEMA Show.

Exhibitors planning to make a newsworthy announcement that would appeal to a wide range of media may want to consider conducting a press conference at the 2011 SEMA Show.

With more than 2,500 members of the media expected to attend the 2011 Show, a press conference can be the ideal solution for communicating news to several reporters quickly and efficiently. For complete details or to schedule a press conference, access the form in the Exhibitor Manual. Under the “Marketing, Advertising & Sponsorships – Opportunities to Promote Your Booth” section on the right side, select the “Media/Press Conference Application” link. From there, enter your exhibitor company name and follow the step-by-step instructions.

All press conferences are scheduled by SEMA and included in an official schedule that is promoted to the media. The deadline for exhibitors to submit a press conference application is September 2, 2011. There is no cost to hold a press conference.

For questions or additional information, contact pr@sema.org or call 909/978-6723.

 

	The 2011 Business Technology Symposium will include five essential business technology super sessions presented by leading industry experts.

Tomorrow, Friday, July 22, is the last day to save $50 on registration for the 2011 Business Technology Symposium (BTS). For more information and to register, visit www.sema.org/bts.

Whether you’re a small-business owner, on the IT staff or in charge of marketing and sales, you can’t afford to pass up these five essential business technology super sessions presented by leading industry experts. The BTS, presented by SEMA’s Street Performance Council (SPC), will be held Wednesday, July 27, 2011, from 10:00 a.m.–4:00 p.m. at the Renaissance Hotel in Long Beach, California. The event will include a networking lunch. Don't miss this opportunity to learn more about emerging trends and technology.

2011 Business Technology Symposium Super Sessions:

Mobile's Role in the Automotive Aftermarket (10:00 a.m.): Today's buyers increasingly rely on their mobile devices to make purchases and do product research. Consumers purchased 90,000 parts and accessories and 2,000 cars per week using eBay apps globally in Q1 2011—and that is only one mobile app example! Find out why mobile is an increasingly influential medium when it comes to auto purchases. Innovations in mobile include VIN barcode scanning to upload vehicle information and one-click-parts finder technology to locate parts and accessories specific to your vehicle. Consumers are most likely to remember a parts purchase when they are at a car show, trading tips with a friend at a sporting event or even at the parking lot walking by a custom car—all when you are on the go. Learn more on why auto purchases, especially repair, replacement and modification parts, are such a great fit for mobile. PRESENTER: Steve Yankovich, Vice President of Mobile, eBay.

Product Design and Manufacturing Technology That Could Change the Aftermarket (11:00 a.m.): Imagine a world where new products can be designed as shapes on a computer and easily turned into objects using 3-D printers. You can “print” or make a dozen, see if there is a market for them and “print” 50 more with minor modifications using feedback from early users—all while reducing costs and waste. The technology is here and gaining ground quickly. This session will examine design innovation (customer feedback on product development and improvement), the latest in scanning tools and related equipment (purchase and rental), CAD/CAM software (including inexpensive free tools) and additive manufacturing/rapid prototyping machines. The future is here. Don’t miss this intriguing discussion. PANEL: Tom Myroniak, SEMA; Rodrigo Meraz, 3D InfoTech; Brandon Roby, Whole Hog Technologies; Chris Strong, 3D InfoTech; and Terry Wohlers, Wohlers Associates.

Manufacturer & Distributor Online Marketing Essentials (1:15 p.m.): With limited resources and almost unlimited opportunities, where should your company invest in the digital space? Facebook, Twitter, YouTube, mobile, eCommerce—what will really net the best return on investment? What is the best way to generate new leads and engage current customers? Learn what the current trends are and what’s working best for companies in the aftermarket. PANEL: John Berg, Swirl; Randy Buller, Part Authority; Famous Rhodes, eBay Motors; James Yim, Falken Tire; and Edward Yu, Cie Studios.

Connecting With Customers: Effective Content Marketing (2:15 p.m.): The rules of marketing have changed. Previously, marketing and sales consisted of blanket messages about your company’s superior products or services. Today’s savvy customers want relevant and valuable content that is tailored specifically to them. This session will examine how to develop and deliver compelling content that will help convert prospects to customers as well as how to keep them engaged. PRESENTER: Robert Rose, Chief Troublemaker, Big Blue Moose.

Capture, Manage & Nurture Leads to Win More Customers (3:30 p.m.): It is invaluable when a potential customer initiates contact with your company. But how do you attract them? And once you have them, what is the process to convert them efficiently and effectively? This session will discuss how to attract highly qualified customers, nurture them along in the sales process and work toward converting them to a loyal customer. PRESENTER: Kirsten Knipp, Director of Product Evangelism, HubSpot.

SAVE $50 when you register before July 22. Registration must be received by July 25. For more information, visit sema.org/bts.

Click here to view the 2010 BTS highlights video.

To donate door prizes or to inquire about sponsorship opportunities, contact Staci Bostock at 909/978-6693 or StaciB@sema.org.

 

	The 2011 Business Technology Symposium will include five essential business technology super sessions presented by leading industry experts.

Tomorrow, Friday, July 22, is the last day to save $50 on registration for the 2011 Business Technology Symposium (BTS). For more information and to register, visit www.sema.org/bts.

Whether you’re a small-business owner, on the IT staff or in charge of marketing and sales, you can’t afford to pass up these five essential business technology super sessions presented by leading industry experts. The BTS, presented by SEMA’s Street Performance Council (SPC), will be held Wednesday, July 27, 2011, from 10:00 a.m.–4:00 p.m. at the Renaissance Hotel in Long Beach, California. The event will include a networking lunch. Don't miss this opportunity to learn more about emerging trends and technology.

2011 Business Technology Symposium Super Sessions:

Mobile's Role in the Automotive Aftermarket (10:00 a.m.): Today's buyers increasingly rely on their mobile devices to make purchases and do product research. Consumers purchased 90,000 parts and accessories and 2,000 cars per week using eBay apps globally in Q1 2011—and that is only one mobile app example! Find out why mobile is an increasingly influential medium when it comes to auto purchases. Innovations in mobile include VIN barcode scanning to upload vehicle information and one-click-parts finder technology to locate parts and accessories specific to your vehicle. Consumers are most likely to remember a parts purchase when they are at a car show, trading tips with a friend at a sporting event or even at the parking lot walking by a custom car—all when you are on the go. Learn more on why auto purchases, especially repair, replacement and modification parts, are such a great fit for mobile. PRESENTER: Steve Yankovich, Vice President of Mobile, eBay.

Product Design and Manufacturing Technology That Could Change the Aftermarket (11:00 a.m.): Imagine a world where new products can be designed as shapes on a computer and easily turned into objects using 3-D printers. You can “print” or make a dozen, see if there is a market for them and “print” 50 more with minor modifications using feedback from early users—all while reducing costs and waste. The technology is here and gaining ground quickly. This session will examine design innovation (customer feedback on product development and improvement), the latest in scanning tools and related equipment (purchase and rental), CAD/CAM software (including inexpensive free tools) and additive manufacturing/rapid prototyping machines. The future is here. Don’t miss this intriguing discussion. PANEL: Tom Myroniak, SEMA; Rodrigo Meraz, 3D InfoTech; Brandon Roby, Whole Hog Technologies; Chris Strong, 3D InfoTech; and Terry Wohlers, Wohlers Associates.

Manufacturer & Distributor Online Marketing Essentials (1:15 p.m.): With limited resources and almost unlimited opportunities, where should your company invest in the digital space? Facebook, Twitter, YouTube, mobile, eCommerce—what will really net the best return on investment? What is the best way to generate new leads and engage current customers? Learn what the current trends are and what’s working best for companies in the aftermarket. PANEL: John Berg, Swirl; Randy Buller, Part Authority; Famous Rhodes, eBay Motors; James Yim, Falken Tire; and Edward Yu, Cie Studios.

Connecting With Customers: Effective Content Marketing (2:15 p.m.): The rules of marketing have changed. Previously, marketing and sales consisted of blanket messages about your company’s superior products or services. Today’s savvy customers want relevant and valuable content that is tailored specifically to them. This session will examine how to develop and deliver compelling content that will help convert prospects to customers as well as how to keep them engaged. PRESENTER: Robert Rose, Chief Troublemaker, Big Blue Moose.

Capture, Manage & Nurture Leads to Win More Customers (3:30 p.m.): It is invaluable when a potential customer initiates contact with your company. But how do you attract them? And once you have them, what is the process to convert them efficiently and effectively? This session will discuss how to attract highly qualified customers, nurture them along in the sales process and work toward converting them to a loyal customer. PRESENTER: Kirsten Knipp, Director of Product Evangelism, HubSpot.

SAVE $50 when you register before July 22. Registration must be received by July 25. For more information, visit sema.org/bts.

Click here to view the 2010 BTS highlights video.

To donate door prizes or to inquire about sponsorship opportunities, contact Staci Bostock at 909/978-6693 or StaciB@sema.org.

Aftermarket suppliers can now make parts for the all-new ’12 Nissan NV commercial vehicle.

The launch of Nissan’s all-new ’12 NV commercial vehicle brings many opportunities for specialty-parts manufacturers to make products specifically for this vehicle. One company already involved is Transfer Flow, which makes aftermarket fuel tank taps for the NV.

The NV is available in three trim levels—1500, 2500 HD and 3500 HD. The 1500 is powered by a 261hp, 4.0L V6 engine mated to a five-speed automatic transmission. It features a full-length, fully boxed ladder frame, 243-degree wide-opening rear doors, 234.1 cu.-ft. of cargo space and a standard roof. The 2500 HD is equipped with the same 4.0L V6 or a 5.6L V8 that produces 317 hp. Options include a 323.1 cu.-ft. high roof. The 3500 HD is standard-equipped with the 5.6L V8 and also offers the high-roof option. All models are rear-wheel drive and two-passenger capacity.

Click here for more information.

	Charger

Dodge has announced its project-vehicle program for the 2011 SEMA Show. The program will focus on two vehicles: The Dodge Charger and Challenger. Dodge requests that exhibitors interested in building these vehicles for the Show submit three copies of the vehicle proposal.

The deadline to submit proposals is August 12, and Dodge says that vehicles will be awarded on or around August 31. More information on the vehicle is available at www.dodge.com.

Proposals should include the following information:

1. An introductory letter defining the theme of the project vehicle and its general content, the vehicle need date and project completion date.
2. A list of specific component changes/upgrades, including partnered sources, if appropriate.
3. A proposed list of intended events, trade shows, publications, websites, etc., where the vehicle will be promoted. Availability for the 2011 SEMA Show in Las Vegas is required. Please state where the vehicle will be displayed at the SEMA Show, who will sponsor the vehicle and whether it will be placed in a feature spot. Note: Partners are required to promote the vehicle through November 1, 2012.

4. 	Challenger

   8½ x 11 color renderings illustrating front/side, and rear appearance (Composite ¾ views acceptable) with the intended color and graphic scheme accurately defined. If the interior will be significantly modified, an interior sketch is recommended as well. Preservation of front-end brand identity (brand emblem and possibly grille features) is mandatory.

Submit proposals to:

Eric Andrew
Dodge Brand Marketing
1000 Chrysler Dr.
CIMS 485-05-47
Auburn Hills, MI 48306
epa4@chrysler.com

For the official announcement from Dodge, click here.

	Charger

Dodge has announced its project-vehicle program for the 2011 SEMA Show. The program will focus on two vehicles: The Dodge Charger and Challenger. Dodge requests that exhibitors interested in building these vehicles for the Show submit three copies of the vehicle proposal.

The deadline to submit proposals is August 12, and Dodge says that vehicles will be awarded on or around August 31. More information on the vehicle is available at www.dodge.com.

Proposals should include the following information:

1. An introductory letter defining the theme of the project vehicle and its general content, the vehicle need date and project completion date.
2. A list of specific component changes/upgrades, including partnered sources, if appropriate.
3. A proposed list of intended events, trade shows, publications, websites, etc., where the vehicle will be promoted. Availability for the 2011 SEMA Show in Las Vegas is required. Please state where the vehicle will be displayed at the SEMA Show, who will sponsor the vehicle and whether it will be placed in a feature spot. Note: Partners are required to promote the vehicle through November 1, 2012.

4. 	Challenger

   8½ x 11 color renderings illustrating front/side, and rear appearance (Composite ¾ views acceptable) with the intended color and graphic scheme accurately defined. If the interior will be significantly modified, an interior sketch is recommended as well. Preservation of front-end brand identity (brand emblem and possibly grille features) is mandatory.

Submit proposals to:

Eric Andrew
Dodge Brand Marketing
1000 Chrysler Dr.
CIMS 485-05-47
Auburn Hills, MI 48306
epa4@chrysler.com

For the official announcement from Dodge, click here.

The SEMA Show features thousands of project vehicles each year that represent the ingenuity and creativity of the specialty-equipment market. SEMA Show exhibitors can generate more product exposure by offering products to builders through the SEMA Show Products for Project-Vehicle Builders list. The list is a simple way to connect exhibitors who want to get more eyes on their products at the Show with builders designing the vehicles that attract attention from thousands of buyers and members of the media.

Each week SEMA eNews will feature the latest additions to the list, and hundreds of builders will access the list to find the pieces they need to complete their builds. Product-placement opportunities such as this are so beneficial that exhibitors often offer products for free or at a greatly reduced rate. Note: The list is reserved for exhibitors of the 2011 SEMA Show.

To place your product on the list, send your company name, a brief product description, contact information and a website where the products can be viewed to eNews@sema.org and put “Product List” in the e-mail subject line. To complete the process online, use this electronic form that is part of the Exhibitor Manual.

Remember, builders will contact you directly, so make sure your contact information is accurate. New submissions will be included each week, when available.

For questions or additional information, contact Jason Catullo at jasonc@sema.org or 909/978-6713.

Here are the latest additions to the list:

Exterior Products/Accessories

Crazyfish Graphics (Booth #12004): Custom striping, graphics and wraps. Contact: Joe Naponiello, 773/254-3500; 773/254-3655 (fax). Website: www.crazyfishgfx.com.

Paramount Restyling (Booth #12753): Billet grilles, SS mesh grilles, Evolution mesh grilles. Carbon fiber grilles, carbon fiber door-handle covers. Contact: Kevin Doyle, 909/781-6492, ext. 307; 909/781-6496 (fax). Website: www.paramountrestyling.com.

Undercover Inc. (Booth #31033): Undercover SE smooth, paintable ABS bed cover. Contact: Jason Hutchens, 866/900-8800; 417/753-7999 (fax). Website: www.undercoversesmooth.com.

Interior Products/Accessories

Grant Products International: Steering wheels, shift knobs and more. Contact: Wes Fisher. Website: www.grantproducts.com.

Suspension/Brakes

BC Racing Wheels and Suspension (Booth #24955): Adjustable coilover kits and racing suspension. Contact: Chelsea DeNofa, 321/206-6381; 321/206-6381 (fax). Website: www.bcracingwheels.com.

FOX Racing Shox (Booth #34159): High-performance shock absorbers and racing suspension products for trucks, SUVs, Jeeps, UTVs and off-road vehicles. Contact: Brian Godfrey, 831/768-4523. Website: www.foxracingshox.com.

Wheels & Tires

BC Racing Wheels and Suspension (Booth #24955): Two-piece forged wheels custom made to your spec. Contact: Chelsea DeNofa, 321/206-6381; 321/206-6381 (fax). Website: www.bcracingwheels.com.

Voxx Wheel (B/G rodworks & GFX wheels - Booth #44275): Wheels: hot rod; Euro; off-road; ATV. Contact: Barry Horlick, 310/783-1613; 310/783-1623 (fax). Website: www.voxxwheel.com.

Here are the previous submissions for the list:

Engine/Underhood Components	Exterior Products/Accessories
Interior Products/Accessories	Suspension/Brakes
Wheels & Tires	Other Products/Services

Engine/Underhood Components

AEM Induction: Full line of high-performance air intake systems and air filters for sport compact, modern-day musclecars and trucks and SUVs, including gas and diesel applications. Contact: Lucio Tapia. Website: www.aemintakes.com.

Air Flow Research Heads (Booth #21125): Composite intake manifolds, CNC aluminum cylinder heads. Contact: Chris Sperling, 661/705-8503; 661/257-4462 (fax). Website: www.airflowresearch.com.

Bully Dog Technologies (Booth #21346): Tuners, intakes, exhausts, turbos and digital gauges. Contact: Brittany Schwartz, 940/783-9914, ext. 1400; 208/226-2511 (fax); or Shawn Udy, 940/783-9914, ext.1145; 208/226-2511 (fax). Website: www.bullydog.com; www.bullydogbigrig.com.

Champion Brands (Booth #21131): Champion racing motor oils, Champion "Blue Flame" diesel performance motor oils, Champion "Classic & Muscle" Hi-Zinc motor oils, Champion "Performance" lubricants. Contact: Karl Dedolph, 660/890-6231; 660/885-2867 (fax). Website: www.championbrands.com.

Clean Seal Inc. (Booth #24674): Automotive hose. Contact: Bill Dorton, 800/366-3682, ext. 138; 574/299-8044 (fax). Website: www.cleanseal.com.

CORSA Performance Exhausts (Booth #23517): High-performance, cat-back and axle-back exhaust systems for today’s cars and trucks. Contact: Casey Milano. Website: www.corsaperformance.com.

Daystar Products International (Booth #23659): Motor and transmission mounts. Contact: Trent McGee, 623/215-0459; 623/907-0088 (fax). Website: www.daystarweb.com.

DCI Performance Products (Booth #25227): Thermal and acoustic insulation products. Contact: Damian Johnson, +61-3-9357-2511; +61-3-9359-2191 (fax). Website: www.dci.com.au/performance.

Gibson Performance Exhaust: Exhaust systems and headers. Applications for trucks, SUVs, diesels, American musclecars, side-x-sides, motorhome, marine, sand car, and off-road. Contact: Robert Murgado, 951/372-1236 (fax). Website: www.gibsonexhaust.com.

JET Performance Products (Booth #23713): Engine-tuning products; mass air sensors. Contact: Dan Nicholas, 714/848-5515; 714/847-6290 (fax). Website: www.jetchip.com.

K&N Engineering Inc.: High-flow intake systems, OE replacement air filters high-performance oil filters for most vehicles and powersports applications. Contact: Lucio Tapia, 951/826-4000, ext. 4350. Website: www.knfilters.com.

Linear Logic LLC (Booth #11628): The ScanGauge2 ultra-compact, multi-function vehicle monitor. Digital gauges, trip computer, scan tool, performance monitor, 72-color, programmable backlight. ScanGaugeE also available for green and eco-friendly vehicles. Contact: Joey Snyder. Website: www.ScanGauge.com.

ODYSSEY Battery by EnerSys (Booth #24943): ODYSSEY batteries and Ultimizer chargers. Contact: April Tomalis; 800/538-3627, ext. 1729; 610/372-8613 (fax). Website: www.odysseybattery.com.OZMO Engineering (Booth #21756): Carbon fiber intake manifolds. Contact: Jamie Krogdahl, 408/898-4533; 987/654-3210 (fax). Website: www.ozmoengineering.com.

ProCharger (Booth #21354): Superchargers and intercooled supercharger systems. Contact: Cary Pangrac; 913/338-2886; 913-338-2879 (fax). Website: www.procharger.com.

SLP Performance Parts: For the 2010–12 V6 and V8 Camaro—Loud Mouth, Loud Mouth II, and PowerFlo axle-back exhaust systems with 4-inch or square tips; Blackwing cold-air induction packages/system; RTM hood with functional heat extractor scoop. For the 2010-11 C6 Corvette—Loud Mouth, Loud Mouth II and PowerFlo axle-back exhaust systems with 3.5-inch or cast aluminum tips; Blackwing cold-air induction system. For the 2010-11 GM/GMC Truck/SUV—PowerFlo exhaust systems with 3.5-inch or trapezoid tips; Blackwing cold-air induction system. For the 2011–2012 Ford Mustang GT—Loud Mouth, Loud Mouth II, and PowerFlo exhaust systems with 4-inch tips. For the 2010–11 Dodge Challenger/Charger—Loud Mouth, Loud Mouth II, and PowerFlo exhaust systems; Blackwing cold-air induction system. Contact: Kevin Woodruff, 732/349-2109, ext. 125. Website: www.slponline.com.

Volant Performance (Booth #23020): Cool air intakes. Contact: Danny Moniz, 909/481-3888; 909/987-8051 (fax). Website: www.volant.com.

Exterior Products/Accessories

A.R.E.: Fiberglass tonneau covers and truck caps custom made to fit most popular trucks. A.R.E. caps and covers are painted to match using the OEM paint code for a high-quality appearance. Contact: Casey Milano. Website: www.4are.com.

ATS Design (Booth# 33105): Full line of stylish, high-quality running boards and fender flares for trucks, vans, SUVs and CUVs. Many no-drill applications available, 8 running board styles to choose from in several finishes. Made only in the USA at ATS-approved facilities. Contact: Rick Nauman; 866/213-2873, ext. 356. Website: www.atsdesign.com.

Baja Designs Inc. (Booth #22486): High-end lights. Contact: Regis Finn, 760/560-2252; 760/560-0383 (fax). Website: www.bajadesigns.com.

BASF Refinish: BASF FOOSE Colors, R-M Carizzma (Candy) paint, Glasurit and Limco finishes available. Products include primer, color and clear for selected vehicles. Contact: Brian Fox, 717/577-6449. Website: www.basfpaintnews.com, www.basfrefinish.com.

BEDSLIDE (Booth #32097): BEDSLIDES for trucks, vans and SUVs. BEDSLIDE is an easy way to load and unload a truck by turning a truck bed into a sliding drawer. Contact: Joel Ayres, 541/690-6357. Website: www.bedslide.com.

Blue Ox (Booth #36083): Blue Ox Allure Towbar, Blue Ox SwayPro weight distribution hitch, Blue Ox gooseneck hitch. Contact: Destiny Thomas; 402/385-3051; 402/385-3360. Website: www.blueox.com.

Bodyguard Truck Accessories (Booth #30185): Heavy-duty front and rear replacement bumpers (smooth steel or treadplate); heavy-duty pipe steps. Contact: Kelli Mallicote, 903/785-8939; 903/782-9890 (fax). Website: www.BodyguardBumpers.com.

Clean Seal Inc. (Booth #24674): Extruded rubber seal and gaskets. Contact: Bill Dorton, 800/366-3682, ext. 138; 574/299-8044 (fax). Website: www.cleanseal.com.

EGR Inc. (Booth #30065): Full line of exterior plastic accessories, including (but not limited to) no-drill fender flares, no-drill hood protectors, side-window visors and side steps. Contact: Robert Wityczak; 909/923-7075. Website: www.egrusa.com.

Go Rhino! Products (Booth #30013): Grille/brush guards with a patented built-in step; winch guards; heavy-duty Wrangler one-piece guards; OE Xtreme 4-, 5- and 6-inch oval running boards; universal steps; hitch steps; bed bars; bed rails; exhaust tips; garage, shop and RV organizers; and patented Dominator II & III sidesteps in modular and one-piece designs. Contact: Kathryn Gallagher, 888/427-4466. Website: www.gorhino.com.

HELLA Inc. (Booth #23113): LED worklamps, Halogen worklamps, HID/Xenon worklamps, HID/Xenon auxiliary lamps, Halogen auxiliary lamps, trumpet horns, air horns (dual and triple tone). Contact: Scott Kornhaus, 770/631-7557; 770/631-7574 (fax). Website: www.myhellalights.com.

Hi-Lift Jack Company (Booth #32005): Hi-Lift Jacks and accessories, Slide-N-Lock tie-down systems. Contact: Steve Dowden; 812/384-4441, ext. 16; 812/384-4592. Website: www.hi-lift.com.

Lazer Star Light Products (Booth #37075): HID and LED driving and off-road lights. Contact: Suzi; 805/226-8200; 805/226-8150 (fax). Website: www.lazerstar.net.

Mile Marker (Booth #33021): Recovery winches and recovery gears and locking hubs. Contact: Jackie Hawkins, 954/782-0604; 954/782-0769 (fax). Website: www.MileMarker.com.

Monster Hooks Inc. (Booth #33189): Manufacturer of the only forged Chromoly Hooks. Monster Hooks Hexaust. Ultimate Drop Hitch. Contact: Marco Najarro, 408/313-0716; 408-624-1440 (fax). Website: www.monsterhooksinc.com.

N-FAB Inc. (Booth #37083): N-FAB Nerf-Steps, RSP bumpers, pre-runners, light bars, and other tubular steel off-road products. Contact: Doug Parks, 281/880-6322; 281/880-6325 (fax). Website: www.n-fab.com.

ORACLE Lighting Technologies (Booth #11443): ORACLE SMD headlight halo kits (all colors available). Contact: Jonathan or Justin; 800/407-5776; 800/407-2631. Website: www.ORACLElights.com.

Ranch Hand: Heavy-duty front bumper replacements, grille guards, headache racks and steps. Contact: Derrick Ratliff. Website: www.ranchhand.com.

Retro USA (Booth #13061): Retro-styled bumpers, trim and moldings for 2005–2009 Mustangs, 2010–2011 Camaros and 2008–2011 Challengers. Available in chrome, black chrome and carbon fiber finishes. Contact: Gary Green; 952/641-2334; 952/435-9891. Website: www.retrousa.net.

Retrax Truck Bed Covers (Booth #35115): Retractable pickup bed covers that glide easily on sealed ball bearings. The covers are key lockable in any position, have a patented low-profile design that incorporates a front cover that is flush with the rolling tonneau cover providing a seal that helps keep the truck bed dry. Contact: Andy Nephew, 701/746-5596. Website: www.retrax.com.

Rhino Linings Corp. (Booth #31055): Spray-in bedliner. Contact: Jenny Clifford; 858/410-6020; 858/450-5078 (fax).

Rhino-Rack USA (Booth #36136): Roof racks and accessories (sport and contractor); cargo carriers/boxes. Contact: Josh Lubitz, 303/706-9700; 303/706-9701 (fax). Website: www.rhinorack.com.

Roll-N-Lock Corp. (Booth #34079): The most compact retractable truck bed cover system available, complete with integrated tailgate lock and an optional cargo manager bed divider. Contact: Dan Beaulaurier, 253/970-2213; 253/799-8502 (fax). Website: www.rollnlock.com.

Shining Monkey Corp. (Booth #13051): Car detailing products. Contact: Robert Dipede, 888/265-8615, ext. 3; 866/353-2500. Website: www.shiningmonkeycorp.com.

SLP Performance Parts: For the 2010–12 V6 and V8 Camaro—Close-out panel insert; high-lip rear spoiler; SS or RS badges with grille inserts. For the 2010-11 C6 Corvette— RTM ZR1 style hood with polycarbonate window; RTM ZR1 style supercharger hoods with polycarbonate window or solid surface; RTM ZR1 style front splitter, fenders with inserts and rocker extensions; rear lip spoiler. For the 2010-11 GM/GMC Truck/SUV—Hood scoop; front fascia/bumper overlay panel. For the 2011–2012 Ford Mustang GT—Quarter window louvers; rear black-out taillight panel. Contact: Kevin Woodruff, 732/349-2109, ext. 125. Website: www.slponline.com.

Surco Products Inc. (Booth #32001): Roof racks, bike racks, wheel chocks, van ladders, RV accessories and custom projects. Contact: Osnat Surkin, 310/323-2520; 310/323-7916 (fax). Website: www.surcoinc.com.

T-Rex Grilles (Booth #35111): Multiple grille designs for most cars, trucks and SUVs, as well as numerous trim accessories. Grille styles include: traditional billet, stainless steel mesh X-Metal studded mesh grilles. All grilles and accessories are available in a polished or black finish and are in stock and ready to ship. Contact: Victor Casillas; 951/270-5388; 951/270-5391 (fax). Website: www.trexbillet.com.

TruXedo (Booth #31033): Complete line of TruXedo soft roll-up tonneau covers and truck accessories. Contact: Rachel Fernandez, 877/878-9336, ext. 287. Website: www.truxedo.com.

Warrior Products (Booth #34091): Jeep exterior accessories, including tube doors, roof racks, fender flares, body armor, etc. Contact: Jason Roy. Website: www.warriorproducts.com.

Interior Products/Accessories

CargoGlide (Booth #31153): Cargo slides for trucks, vans and SUVs. CargoGlide offers several models to suit individual and company needs from 600 lb. to 2,500 lb. capacities. Easy to install. Contact: David McInturf; 239/340-9605.

Daystar Products International (Booth #23659): Exact-fit storage panels and switch panels. Contact: Trent McGee, 623/215-0459; 623/907-0088 (fax). Website: www.daystarweb.com.

DCI Performance Products (Booth #25227): Acoustic insulation products. Contact: Damian Johnson, +61-3-9357-2511; +61-3-9359-2191 (fax). Website: www.dci.com.au/performance.

Got2bWireless: Ultimate hands-free solution for vehicle—hands-free calling, texting, e-mail, Facebook, Twitter and more by using your voice. Contact: Lydia E. Draper, 877/404-6822; 800/790-1248 (fax). Website www.got2bwireless.com.

HELLA Inc. (Booth #23113): LED interior lighting. Contact: Scott Kornhaus, 770/631-7557; 770/631-7574 (fax). Website: www.myhellalights.com.

LeBaron Bonney Co./EZ Boy Interiors (Booth #23083): Reproduction and custom interior kits, including seat and panel upholstery. Contact: Scott Holbrook. Website: www.lebaronbonney.com; www.ezboyinteriors.com.

QuietRIDE Solutions (Booth #24386): AcoustiShield thermal acoustic auto insulation. Contact: Timothy Cox; 209/942-4777; 209/942-4476 (fax). Website: www.quietride.com.

Scosche Industries (Booth #11327): Dash kits, wiring harnesses, antenna adapters, interfaces, speakers, subs, amps, sound dampening material, Bluetooth integration, iPod integration. Contact: Rick Ross, 805/486-4450, ext. 510; 800/350-0687 (fax). Website: www.scosche.com.

Shining Monkey Corp. (Booth #13051): Fabric protection spray. Contact: Robert Dipede, 888/265-8615, ext. 3; 866/353-2500. Website: www.shiningmonkeycorp.com.

Speed Dawg Shift Knobs (Booth #20564): Shift knobs. Contact: Chris Figdore, 717/741-2665; 717/741-2665 (fax). Website: www.speeddawg.com.

VDO Instrumentation & Accessories (Booth #22678): Gauges, accessories, sensors, and senders. Contact: AnnaMaria Blose; 610/289-0488, ext. 4002; 610/289-1766 (fax). Website: www.vdo.com/usa.

Suspension/Brakes

BMF Wheels (Booth #38028): Leveling kits for the new body style Toyota Tundra’s (2007-‘11); Jeep JK (2007-’11); GM 1500 P/U (2007-’11); Ford F-250 and F-350 P/U (2005-‘11); Ford F-150 P/U (2004-’11); and Dodge Ram 2500 and 3500 (1994-’11). Contact: Ryan Husted, 888/313-2580. Website: www.BMFwheels.com.

Daystar Products International (Booth #23659): U.S.-made lift and leveling kits for trucks and SUVs; Scorpion shock absorbers; and performance bushing kits for cars and trucks. Contact: Trent McGee, 623/215-0459; 623/907-0088 (fax). Website: www.daystarweb.com.

Energy Suspension (Booth #22967): Polyurethane suspension and drivetrain components. Contact: Mike Papazian, 949/361-3935; 949/361-3940 (fax). Website: www.energysuspension.com.

MGP Caliper Covers: MGP caliper covers. Custom paint and engraving options available. Contact: Ben Wong, 877/995-0003; 619/330-4609. Website: www.calipercovers.com.

BDS Suspension (Booth #30170): American-made suspension lifts and shocks for trucks, SUVs and Jeeps. Contact: Carter Reed; 517/279-2384, ext. 250; 517/278-2316. Website: www.bds-suspension.com.

Hellwig Products (Booth #22521): Load and sway suspension for trucks, SUVs and vintage and modern musclecars. Contact: Melanie White; 559/734-7451. Website: www.hellwigproducts.com.

Tuff Country EZ-Ride Suspension (Booth #30104): Suspension leveling and lift kits. Contact: Scott Sweeney or Troy Davis, 801/280-2777; 801/280-2896 (fax). Website: www.tuffcountry.com.

Wheels & Tires

American Force Wheels: Forged aluminum, custom-built wheels for dually and SRW trucks. Contact: deyan@americanforcewheels.com. Website: www.americanforcewheels.com.

BMF Wheels (Booth #38028): BMF Wheels line of wheels for the off-road and lifted-truck enthusiast. All BMF Wheels are manufactured using a proprietary, patent-pending, multi-axis CNC machining process. Contact: Blake Ramthun, 888/313-2580. Website: www.BMFwheels.com.

PDK Wheels & Auto Accessories (Booth #46079): Mamba offroad alloys, Von Max luxury alloys and Greed wheels. Contact: Amber, 219/947-1735; 219/945-1975 (fax). Websites: www.mambawheels.com, www.vonmaxwheels.com, www.greedwheels.com.

SLP Performance Parts: For the 2010–12 V6 and V8 Camaro—20-inch five-spoke aluminum alloy wheels. Contact: Kevin Woodruff, 732/349-2109, ext. 125. Website: www.slponline.com.

Vossen Wheels (Booth #47099): Wheels. Contact: Jav; 305/463-7778; 305/256-1007 (fax). Website: www.vossenwheels.com.

Other Products/Services

JET Performance Products (Booth #23713): Programmers. Contact: Dan Nicholas, 714/848-5515; 714/847-6290 (fax). Website: www.jetchip.com.

KBS Coatings (Booth #11053): Rust preventive coatings for chassis, floorpans, engine paints, manifold paints, clearcoat and more. Contact: Jim Krolak, 219/263-0073; 219/531-7797 (fax). Website: www.kbs-coatings.com.

QuietRIDE Solutions (Booth #24386): Firewall insulators and truck headliners. Contact: Timothy Cox; 209/942-4777; 209/942-4476 (fax). Website: www.quietride.com.

Scosche Industries (Booth #11327): iPhone, iPod and iPad accessories. Contact: Rick Ross, 805/486-4450, ext. 510; 800/350-0687 (fax). Website: www.scosche.com.

Shining Monkey Corp. (Booth #13051): Tire dressing. Contact: Robert Dipede, 888/265-8615, ext. 3; 866/353-2500. Website: www.shiningmonkeycorp.com.

Back to Top of Previous Submissions

Back to Top of Page

The SEMA Show features thousands of project vehicles each year that represent the ingenuity and creativity of the specialty-equipment market. SEMA Show exhibitors can generate more product exposure by offering products to builders through the SEMA Show Products for Project-Vehicle Builders list. The list is a simple way to connect exhibitors who want to get more eyes on their products at the Show with builders designing the vehicles that attract attention from thousands of buyers and members of the media.

Each week SEMA eNews will feature the latest additions to the list, and hundreds of builders will access the list to find the pieces they need to complete their builds. Product-placement opportunities such as this are so beneficial that exhibitors often offer products for free or at a greatly reduced rate. Note: The list is reserved for exhibitors of the 2011 SEMA Show.

To place your product on the list, send your company name, a brief product description, contact information and a website where the products can be viewed to eNews@sema.org and put “Product List” in the e-mail subject line. To complete the process online, use this electronic form that is part of the Exhibitor Manual.

Remember, builders will contact you directly, so make sure your contact information is accurate. New submissions will be included each week, when available.

For questions or additional information, contact Jason Catullo at jasonc@sema.org or 909/978-6713.

Here are the latest additions to the list:

Exterior Products/Accessories

Crazyfish Graphics (Booth #12004): Custom striping, graphics and wraps. Contact: Joe Naponiello, 773/254-3500; 773/254-3655 (fax). Website: www.crazyfishgfx.com.

Paramount Restyling (Booth #12753): Billet grilles, SS mesh grilles, Evolution mesh grilles. Carbon fiber grilles, carbon fiber door-handle covers. Contact: Kevin Doyle, 909/781-6492, ext. 307; 909/781-6496 (fax). Website: www.paramountrestyling.com.

Undercover Inc. (Booth #31033): Undercover SE smooth, paintable ABS bed cover. Contact: Jason Hutchens, 866/900-8800; 417/753-7999 (fax). Website: www.undercoversesmooth.com.

Interior Products/Accessories

Grant Products International: Steering wheels, shift knobs and more. Contact: Wes Fisher. Website: www.grantproducts.com.

Suspension/Brakes

BC Racing Wheels and Suspension (Booth #24955): Adjustable coilover kits and racing suspension. Contact: Chelsea DeNofa, 321/206-6381; 321/206-6381 (fax). Website: www.bcracingwheels.com.

FOX Racing Shox (Booth #34159): High-performance shock absorbers and racing suspension products for trucks, SUVs, Jeeps, UTVs and off-road vehicles. Contact: Brian Godfrey, 831/768-4523. Website: www.foxracingshox.com.

Wheels & Tires

BC Racing Wheels and Suspension (Booth #24955): Two-piece forged wheels custom made to your spec. Contact: Chelsea DeNofa, 321/206-6381; 321/206-6381 (fax). Website: www.bcracingwheels.com.

Voxx Wheel (B/G rodworks & GFX wheels - Booth #44275): Wheels: hot rod; Euro; off-road; ATV. Contact: Barry Horlick, 310/783-1613; 310/783-1623 (fax). Website: www.voxxwheel.com.

Here are the previous submissions for the list:

Engine/Underhood Components	Exterior Products/Accessories
Interior Products/Accessories	Suspension/Brakes
Wheels & Tires	Other Products/Services

Engine/Underhood Components

AEM Induction: Full line of high-performance air intake systems and air filters for sport compact, modern-day musclecars and trucks and SUVs, including gas and diesel applications. Contact: Lucio Tapia. Website: www.aemintakes.com.

Air Flow Research Heads (Booth #21125): Composite intake manifolds, CNC aluminum cylinder heads. Contact: Chris Sperling, 661/705-8503; 661/257-4462 (fax). Website: www.airflowresearch.com.

Bully Dog Technologies (Booth #21346): Tuners, intakes, exhausts, turbos and digital gauges. Contact: Brittany Schwartz, 940/783-9914, ext. 1400; 208/226-2511 (fax); or Shawn Udy, 940/783-9914, ext.1145; 208/226-2511 (fax). Website: www.bullydog.com; www.bullydogbigrig.com.

Champion Brands (Booth #21131): Champion racing motor oils, Champion "Blue Flame" diesel performance motor oils, Champion "Classic & Muscle" Hi-Zinc motor oils, Champion "Performance" lubricants. Contact: Karl Dedolph, 660/890-6231; 660/885-2867 (fax). Website: www.championbrands.com.

Clean Seal Inc. (Booth #24674): Automotive hose. Contact: Bill Dorton, 800/366-3682, ext. 138; 574/299-8044 (fax). Website: www.cleanseal.com.

CORSA Performance Exhausts (Booth #23517): High-performance, cat-back and axle-back exhaust systems for today’s cars and trucks. Contact: Casey Milano. Website: www.corsaperformance.com.

Daystar Products International (Booth #23659): Motor and transmission mounts. Contact: Trent McGee, 623/215-0459; 623/907-0088 (fax). Website: www.daystarweb.com.

DCI Performance Products (Booth #25227): Thermal and acoustic insulation products. Contact: Damian Johnson, +61-3-9357-2511; +61-3-9359-2191 (fax). Website: www.dci.com.au/performance.

Gibson Performance Exhaust: Exhaust systems and headers. Applications for trucks, SUVs, diesels, American musclecars, side-x-sides, motorhome, marine, sand car, and off-road. Contact: Robert Murgado, 951/372-1236 (fax). Website: www.gibsonexhaust.com.

JET Performance Products (Booth #23713): Engine-tuning products; mass air sensors. Contact: Dan Nicholas, 714/848-5515; 714/847-6290 (fax). Website: www.jetchip.com.

K&N Engineering Inc.: High-flow intake systems, OE replacement air filters high-performance oil filters for most vehicles and powersports applications. Contact: Lucio Tapia, 951/826-4000, ext. 4350. Website: www.knfilters.com.

Linear Logic LLC (Booth #11628): The ScanGauge2 ultra-compact, multi-function vehicle monitor. Digital gauges, trip computer, scan tool, performance monitor, 72-color, programmable backlight. ScanGaugeE also available for green and eco-friendly vehicles. Contact: Joey Snyder. Website: www.ScanGauge.com.

ODYSSEY Battery by EnerSys (Booth #24943): ODYSSEY batteries and Ultimizer chargers. Contact: April Tomalis; 800/538-3627, ext. 1729; 610/372-8613 (fax). Website: www.odysseybattery.com.OZMO Engineering (Booth #21756): Carbon fiber intake manifolds. Contact: Jamie Krogdahl, 408/898-4533; 987/654-3210 (fax). Website: www.ozmoengineering.com.

ProCharger (Booth #21354): Superchargers and intercooled supercharger systems. Contact: Cary Pangrac; 913/338-2886; 913-338-2879 (fax). Website: www.procharger.com.

SLP Performance Parts: For the 2010–12 V6 and V8 Camaro—Loud Mouth, Loud Mouth II, and PowerFlo axle-back exhaust systems with 4-inch or square tips; Blackwing cold-air induction packages/system; RTM hood with functional heat extractor scoop. For the 2010-11 C6 Corvette—Loud Mouth, Loud Mouth II and PowerFlo axle-back exhaust systems with 3.5-inch or cast aluminum tips; Blackwing cold-air induction system. For the 2010-11 GM/GMC Truck/SUV—PowerFlo exhaust systems with 3.5-inch or trapezoid tips; Blackwing cold-air induction system. For the 2011–2012 Ford Mustang GT—Loud Mouth, Loud Mouth II, and PowerFlo exhaust systems with 4-inch tips. For the 2010–11 Dodge Challenger/Charger—Loud Mouth, Loud Mouth II, and PowerFlo exhaust systems; Blackwing cold-air induction system. Contact: Kevin Woodruff, 732/349-2109, ext. 125. Website: www.slponline.com.

Volant Performance (Booth #23020): Cool air intakes. Contact: Danny Moniz, 909/481-3888; 909/987-8051 (fax). Website: www.volant.com.

Exterior Products/Accessories

A.R.E.: Fiberglass tonneau covers and truck caps custom made to fit most popular trucks. A.R.E. caps and covers are painted to match using the OEM paint code for a high-quality appearance. Contact: Casey Milano. Website: www.4are.com.

ATS Design (Booth# 33105): Full line of stylish, high-quality running boards and fender flares for trucks, vans, SUVs and CUVs. Many no-drill applications available, 8 running board styles to choose from in several finishes. Made only in the USA at ATS-approved facilities. Contact: Rick Nauman; 866/213-2873, ext. 356. Website: www.atsdesign.com.

Baja Designs Inc. (Booth #22486): High-end lights. Contact: Regis Finn, 760/560-2252; 760/560-0383 (fax). Website: www.bajadesigns.com.

BASF Refinish: BASF FOOSE Colors, R-M Carizzma (Candy) paint, Glasurit and Limco finishes available. Products include primer, color and clear for selected vehicles. Contact: Brian Fox, 717/577-6449. Website: www.basfpaintnews.com, www.basfrefinish.com.

BEDSLIDE (Booth #32097): BEDSLIDES for trucks, vans and SUVs. BEDSLIDE is an easy way to load and unload a truck by turning a truck bed into a sliding drawer. Contact: Joel Ayres, 541/690-6357. Website: www.bedslide.com.

Blue Ox (Booth #36083): Blue Ox Allure Towbar, Blue Ox SwayPro weight distribution hitch, Blue Ox gooseneck hitch. Contact: Destiny Thomas; 402/385-3051; 402/385-3360. Website: www.blueox.com.

Bodyguard Truck Accessories (Booth #30185): Heavy-duty front and rear replacement bumpers (smooth steel or treadplate); heavy-duty pipe steps. Contact: Kelli Mallicote, 903/785-8939; 903/782-9890 (fax). Website: www.BodyguardBumpers.com.

Clean Seal Inc. (Booth #24674): Extruded rubber seal and gaskets. Contact: Bill Dorton, 800/366-3682, ext. 138; 574/299-8044 (fax). Website: www.cleanseal.com.

EGR Inc. (Booth #30065): Full line of exterior plastic accessories, including (but not limited to) no-drill fender flares, no-drill hood protectors, side-window visors and side steps. Contact: Robert Wityczak; 909/923-7075. Website: www.egrusa.com.

Go Rhino! Products (Booth #30013): Grille/brush guards with a patented built-in step; winch guards; heavy-duty Wrangler one-piece guards; OE Xtreme 4-, 5- and 6-inch oval running boards; universal steps; hitch steps; bed bars; bed rails; exhaust tips; garage, shop and RV organizers; and patented Dominator II & III sidesteps in modular and one-piece designs. Contact: Kathryn Gallagher, 888/427-4466. Website: www.gorhino.com.

HELLA Inc. (Booth #23113): LED worklamps, Halogen worklamps, HID/Xenon worklamps, HID/Xenon auxiliary lamps, Halogen auxiliary lamps, trumpet horns, air horns (dual and triple tone). Contact: Scott Kornhaus, 770/631-7557; 770/631-7574 (fax). Website: www.myhellalights.com.

Hi-Lift Jack Company (Booth #32005): Hi-Lift Jacks and accessories, Slide-N-Lock tie-down systems. Contact: Steve Dowden; 812/384-4441, ext. 16; 812/384-4592. Website: www.hi-lift.com.

Lazer Star Light Products (Booth #37075): HID and LED driving and off-road lights. Contact: Suzi; 805/226-8200; 805/226-8150 (fax). Website: www.lazerstar.net.

Mile Marker (Booth #33021): Recovery winches and recovery gears and locking hubs. Contact: Jackie Hawkins, 954/782-0604; 954/782-0769 (fax). Website: www.MileMarker.com.

Monster Hooks Inc. (Booth #33189): Manufacturer of the only forged Chromoly Hooks. Monster Hooks Hexaust. Ultimate Drop Hitch. Contact: Marco Najarro, 408/313-0716; 408-624-1440 (fax). Website: www.monsterhooksinc.com.

N-FAB Inc. (Booth #37083): N-FAB Nerf-Steps, RSP bumpers, pre-runners, light bars, and other tubular steel off-road products. Contact: Doug Parks, 281/880-6322; 281/880-6325 (fax). Website: www.n-fab.com.

ORACLE Lighting Technologies (Booth #11443): ORACLE SMD headlight halo kits (all colors available). Contact: Jonathan or Justin; 800/407-5776; 800/407-2631. Website: www.ORACLElights.com.

Ranch Hand: Heavy-duty front bumper replacements, grille guards, headache racks and steps. Contact: Derrick Ratliff. Website: www.ranchhand.com.

Retro USA (Booth #13061): Retro-styled bumpers, trim and moldings for 2005–2009 Mustangs, 2010–2011 Camaros and 2008–2011 Challengers. Available in chrome, black chrome and carbon fiber finishes. Contact: Gary Green; 952/641-2334; 952/435-9891. Website: www.retrousa.net.

Retrax Truck Bed Covers (Booth #35115): Retractable pickup bed covers that glide easily on sealed ball bearings. The covers are key lockable in any position, have a patented low-profile design that incorporates a front cover that is flush with the rolling tonneau cover providing a seal that helps keep the truck bed dry. Contact: Andy Nephew, 701/746-5596. Website: www.retrax.com.

Rhino Linings Corp. (Booth #31055): Spray-in bedliner. Contact: Jenny Clifford; 858/410-6020; 858/450-5078 (fax).

Rhino-Rack USA (Booth #36136): Roof racks and accessories (sport and contractor); cargo carriers/boxes. Contact: Josh Lubitz, 303/706-9700; 303/706-9701 (fax). Website: www.rhinorack.com.

Roll-N-Lock Corp. (Booth #34079): The most compact retractable truck bed cover system available, complete with integrated tailgate lock and an optional cargo manager bed divider. Contact: Dan Beaulaurier, 253/970-2213; 253/799-8502 (fax). Website: www.rollnlock.com.

Shining Monkey Corp. (Booth #13051): Car detailing products. Contact: Robert Dipede, 888/265-8615, ext. 3; 866/353-2500. Website: www.shiningmonkeycorp.com.

SLP Performance Parts: For the 2010–12 V6 and V8 Camaro—Close-out panel insert; high-lip rear spoiler; SS or RS badges with grille inserts. For the 2010-11 C6 Corvette— RTM ZR1 style hood with polycarbonate window; RTM ZR1 style supercharger hoods with polycarbonate window or solid surface; RTM ZR1 style front splitter, fenders with inserts and rocker extensions; rear lip spoiler. For the 2010-11 GM/GMC Truck/SUV—Hood scoop; front fascia/bumper overlay panel. For the 2011–2012 Ford Mustang GT—Quarter window louvers; rear black-out taillight panel. Contact: Kevin Woodruff, 732/349-2109, ext. 125. Website: www.slponline.com.

Surco Products Inc. (Booth #32001): Roof racks, bike racks, wheel chocks, van ladders, RV accessories and custom projects. Contact: Osnat Surkin, 310/323-2520; 310/323-7916 (fax). Website: www.surcoinc.com.

T-Rex Grilles (Booth #35111): Multiple grille designs for most cars, trucks and SUVs, as well as numerous trim accessories. Grille styles include: traditional billet, stainless steel mesh X-Metal studded mesh grilles. All grilles and accessories are available in a polished or black finish and are in stock and ready to ship. Contact: Victor Casillas; 951/270-5388; 951/270-5391 (fax). Website: www.trexbillet.com.

TruXedo (Booth #31033): Complete line of TruXedo soft roll-up tonneau covers and truck accessories. Contact: Rachel Fernandez, 877/878-9336, ext. 287. Website: www.truxedo.com.

Warrior Products (Booth #34091): Jeep exterior accessories, including tube doors, roof racks, fender flares, body armor, etc. Contact: Jason Roy. Website: www.warriorproducts.com.

Interior Products/Accessories

CargoGlide (Booth #31153): Cargo slides for trucks, vans and SUVs. CargoGlide offers several models to suit individual and company needs from 600 lb. to 2,500 lb. capacities. Easy to install. Contact: David McInturf; 239/340-9605.

Daystar Products International (Booth #23659): Exact-fit storage panels and switch panels. Contact: Trent McGee, 623/215-0459; 623/907-0088 (fax). Website: www.daystarweb.com.

DCI Performance Products (Booth #25227): Acoustic insulation products. Contact: Damian Johnson, +61-3-9357-2511; +61-3-9359-2191 (fax). Website: www.dci.com.au/performance.

Got2bWireless: Ultimate hands-free solution for vehicle—hands-free calling, texting, e-mail, Facebook, Twitter and more by using your voice. Contact: Lydia E. Draper, 877/404-6822; 800/790-1248 (fax). Website www.got2bwireless.com.

HELLA Inc. (Booth #23113): LED interior lighting. Contact: Scott Kornhaus, 770/631-7557; 770/631-7574 (fax). Website: www.myhellalights.com.

LeBaron Bonney Co./EZ Boy Interiors (Booth #23083): Reproduction and custom interior kits, including seat and panel upholstery. Contact: Scott Holbrook. Website: www.lebaronbonney.com; www.ezboyinteriors.com.

QuietRIDE Solutions (Booth #24386): AcoustiShield thermal acoustic auto insulation. Contact: Timothy Cox; 209/942-4777; 209/942-4476 (fax). Website: www.quietride.com.

Scosche Industries (Booth #11327): Dash kits, wiring harnesses, antenna adapters, interfaces, speakers, subs, amps, sound dampening material, Bluetooth integration, iPod integration. Contact: Rick Ross, 805/486-4450, ext. 510; 800/350-0687 (fax). Website: www.scosche.com.

Shining Monkey Corp. (Booth #13051): Fabric protection spray. Contact: Robert Dipede, 888/265-8615, ext. 3; 866/353-2500. Website: www.shiningmonkeycorp.com.

Speed Dawg Shift Knobs (Booth #20564): Shift knobs. Contact: Chris Figdore, 717/741-2665; 717/741-2665 (fax). Website: www.speeddawg.com.

VDO Instrumentation & Accessories (Booth #22678): Gauges, accessories, sensors, and senders. Contact: AnnaMaria Blose; 610/289-0488, ext. 4002; 610/289-1766 (fax). Website: www.vdo.com/usa.

Suspension/Brakes

BMF Wheels (Booth #38028): Leveling kits for the new body style Toyota Tundra’s (2007-‘11); Jeep JK (2007-’11); GM 1500 P/U (2007-’11); Ford F-250 and F-350 P/U (2005-‘11); Ford F-150 P/U (2004-’11); and Dodge Ram 2500 and 3500 (1994-’11). Contact: Ryan Husted, 888/313-2580. Website: www.BMFwheels.com.

Daystar Products International (Booth #23659): U.S.-made lift and leveling kits for trucks and SUVs; Scorpion shock absorbers; and performance bushing kits for cars and trucks. Contact: Trent McGee, 623/215-0459; 623/907-0088 (fax). Website: www.daystarweb.com.

Energy Suspension (Booth #22967): Polyurethane suspension and drivetrain components. Contact: Mike Papazian, 949/361-3935; 949/361-3940 (fax). Website: www.energysuspension.com.

MGP Caliper Covers: MGP caliper covers. Custom paint and engraving options available. Contact: Ben Wong, 877/995-0003; 619/330-4609. Website: www.calipercovers.com.

BDS Suspension (Booth #30170): American-made suspension lifts and shocks for trucks, SUVs and Jeeps. Contact: Carter Reed; 517/279-2384, ext. 250; 517/278-2316. Website: www.bds-suspension.com.

Hellwig Products (Booth #22521): Load and sway suspension for trucks, SUVs and vintage and modern musclecars. Contact: Melanie White; 559/734-7451. Website: www.hellwigproducts.com.

Tuff Country EZ-Ride Suspension (Booth #30104): Suspension leveling and lift kits. Contact: Scott Sweeney or Troy Davis, 801/280-2777; 801/280-2896 (fax). Website: www.tuffcountry.com.

Wheels & Tires

American Force Wheels: Forged aluminum, custom-built wheels for dually and SRW trucks. Contact: deyan@americanforcewheels.com. Website: www.americanforcewheels.com.

BMF Wheels (Booth #38028): BMF Wheels line of wheels for the off-road and lifted-truck enthusiast. All BMF Wheels are manufactured using a proprietary, patent-pending, multi-axis CNC machining process. Contact: Blake Ramthun, 888/313-2580. Website: www.BMFwheels.com.

PDK Wheels & Auto Accessories (Booth #46079): Mamba offroad alloys, Von Max luxury alloys and Greed wheels. Contact: Amber, 219/947-1735; 219/945-1975 (fax). Websites: www.mambawheels.com, www.vonmaxwheels.com, www.greedwheels.com.

SLP Performance Parts: For the 2010–12 V6 and V8 Camaro—20-inch five-spoke aluminum alloy wheels. Contact: Kevin Woodruff, 732/349-2109, ext. 125. Website: www.slponline.com.

Vossen Wheels (Booth #47099): Wheels. Contact: Jav; 305/463-7778; 305/256-1007 (fax). Website: www.vossenwheels.com.

Other Products/Services

JET Performance Products (Booth #23713): Programmers. Contact: Dan Nicholas, 714/848-5515; 714/847-6290 (fax). Website: www.jetchip.com.

KBS Coatings (Booth #11053): Rust preventive coatings for chassis, floorpans, engine paints, manifold paints, clearcoat and more. Contact: Jim Krolak, 219/263-0073; 219/531-7797 (fax). Website: www.kbs-coatings.com.

QuietRIDE Solutions (Booth #24386): Firewall insulators and truck headliners. Contact: Timothy Cox; 209/942-4777; 209/942-4476 (fax). Website: www.quietride.com.

Scosche Industries (Booth #11327): iPhone, iPod and iPad accessories. Contact: Rick Ross, 805/486-4450, ext. 510; 800/350-0687 (fax). Website: www.scosche.com.

Shining Monkey Corp. (Booth #13051): Tire dressing. Contact: Robert Dipede, 888/265-8615, ext. 3; 866/353-2500. Website: www.shiningmonkeycorp.com.

Back to Top of Previous Submissions

Back to Top of Page