Fri, 06/01/2012 - 10:13

SEMA News—June 2012

LEGISLATIVE & TECHNICAL AFFAIRS
By Steve McDonald

Law and Order

Law and Order is an update of some of the most recent federal and state legislative and regulatory issues that could potentially impact the automotive specialty-equipment industry. These include issues affecting small-business owners and their employees.  

STATE UPDATE

California
Specially Constructed Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation 
   
For the past several years, SEMA has been working with the California legislature and state agencies to provide protection for owners of improperly or illegally titled and registered specially constructed vehicles (SPCNS). Under a looming threat of prosecution, this program was pursued to help vehicle owners and builders avoid a situation that could have led to confiscated cars and felony law enforcement actions. Beginning July 1, 2011, an amnesty program to allow proper registration of previously registered SPCNS went into effect. The program is slated to conclude on June 30, 2012. Working with the Bureau of Automotive Repair (BAR) and the Department of Motor Vehicles (DMV), SEMA has finally resolved program implementation problems on behalf of California SPCNS owners seeking amnesty. These solutions permit these owners and builders to demonstrate compliance with current BAR smog-check tailpipe emissions requirements in addition to providing amnesty for owners who have knowingly made false statements regarding the value of these vehicles, the year of manufacture or knowingly falsified any other facts in documents filed with the DMV or Highway Patrol.

California
Emissions Exemption:

SEMA-supported legislation to exempt all motor vehicles prior to the 1981 model year from the emissions inspection requirement has been granted reconsideration after failing to be approved by the Senate Transportation and Housing Committee on a 3-4 vote. The bill will be reconsidered in a future committee hearing. In 2004, legislation was enacted to repeal California’s rolling emissions-test exemption for vehicles 30 years old and older and replace it with a law requiring the lifetime testing of all 1976 and newer model-year vehicles.

Connecticut
Antique/Rare/Special-Interest Motor Vehicles:

SEMA-opposed legislation to increase the age requirement for vehicles eligible for registration as “antique, rare or special-interest motor vehicles” was approved by the Connecticut Joint Committee on Planning and Development by a narrow 10-9 vote. Under the bill, vehicles to be registered as antique, rare or special-interest motor vehicles would be required to be at least 30 years old. Currently, vehicles 20 years old or older are eligible for this status and special license plates. For the purpose of property taxes, the bill also increases the maximum assessment of these vehicles from $500 to $2,500. The bill will now be sent to the Connecticut House of Representatives for a vote by all members.

Hawaii
Low-Mileage Credit:

SEMA is supporting resolutions introduced in the Hawaii House of Representatives urging the city and county of Honolulu to create a 10% vehicle registration credit for residents who drive limited miles in their vehicles, such as rarely used hobby cars. The resolutions were introduced to offset the burden put on certain vehicle owners by increased registration fees. Under the resolutions, the credit would extend to any resident who is registering a vehicle and can provide the two most recent safety inspections (at least 11 months apart) showing that less than 3,000 miles were driven between the two inspections.

Michigan
Ethanol:

SEMA is supporting Michigan legislation requiring retail dealers that offer gasoline for sale to label those pumps dispensing ethanol-blended gasoline with a notice that indicates the grade of gasoline and the percentage of ethanol contained. Under current Michigan law, gasoline that contains 10% or less ethanol is not subject to the labeling requirement. The bill provides that a person who violates the labeling requirement is liable for a civil fine up to $1,000 for each day the violation continues.

Nebraska
Special-Interest Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
SEMA-supported legislation to create a registration class and special license plate for special-interest motor vehicles was signed into law by Governor Dave Heineman. The new law authorizes owners of special-interest motor vehicles to operate them on Nebraska’s roads displaying a single license plate on the rear of the vehicle. Under the new law, special-interest motor vehicles are defined as those vehicles “of any age which are being collected, preserved, restored, or maintained by the owner as a leisure pursuit and not used for general transportation of persons or cargo.” Under a SEMA-drafted amendment, special-interest motor vehicles may be driven on public streets and roads for occasional transportation, public displays, parades and related pleasure or hobby activities. SEMA worked with the bill sponsor and staff to delete provisions in the original bill that would have required proof of membership in a recognized car club; forced owners to account for all daily-driver vehicles owned or operated by the applicant; obligated owners to a sworn affidavit that the vehicle would not be used for daily transportation; and mandated that these vehicles be essentially unaltered from the original manufacturer’s specifications.

New Jersey
Emissions Exemption:

In 2010, SEMA-supported legislation to extend the emissions inspection exemption to vehicles five model years old or newer was signed into law, subject to approval by the U.S. Environmental Protection Agency (EPA). Previous law exempted only vehicles four model years old or newer. The EPA has now incorporated revisions to the State Implementation Plan (SIP) submitted by the New Jersey Department of Environmental Protection to include the extension of the new vehicle inspection exemption from four years to five years. This action acknowledges the relatively minimal environmental impact of the vehicles targeted for this exemption and that it is senseless to test newer vehicles, the results of which demonstrate no significant air quality benefits.

Pennsylvania
Year-of-Manufacture Plates:

SEMA-supported legislation to provide vehicle owners with the option of using vintage, original model-year license plates on antique and classic vehicles was signed into law by Governor Tom Corbett. Under the bill, an application fee of $75 would be charged to use year-of-manufacture plates. Under the measure, vintage plates must have been issued by the state between the years 1906 and 1975, must be provided by the vehicle owner and be legible from a reasonable distance. Under current law, antique-vehicle owners may apply for special antique, classic or collectible plates that bear the designation “antique vehicle.” These plates would still be available to state hobbyists if the bill is signed into law.

Texas Street
Rods/Custom Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The Texas Department of Motor Vehicles (DMV) has issued its policies and procedures for issuance of titles and specialty license plates to owners who seek to register their vehicle as street rods or custom vehicles. The policy also provides for a basic safety equipment inspection to be performed by an Automotive Service Excellence (ASE) master technician. These procedures were drafted pursuant to the 2011 enactment into law of SEMA-model legislation. Originally slated to go into effect on September 1, 2011, the new law defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured after 1948. The law also allows for the use of non-original materials and creates a titling and registration criterion that assigns these vehicles the same model-year designations as the production vehicles they most closely resemble. In addition, the law holds only street rods, customs and replicas to the equipment standards specified by law during the model year listed on the title of the vehicle. Unfortunately, due to a flawed interpretation of the law by the DMV, all vehicles seeking registration as street rods and custom vehicles must carry a title with a “Replica” brand—even those vehicles altered from original steel bodies. According to the DMV, any changes to that policy must be provided to the agency through amendments to the law. SEMA is currently in the process of contacting members of the Texas legislature to seek additional legislation to correct this flaw. The Texas legislature does not meet for a regular 2012 session, requiring legislation to be introduced in 2013. In the meantime, the new polices should accommodate owners of replica street rods and custom vehicles.

Utah
Vintage Travel Trailers:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
A SEMA-supported bill to create a statutory definition of a “vintage travel trailer” and provide for a one-time $40 registration fee was signed into law by Governor Gary Herbert. Under the law, vintage travel trailers would also be eligible for special group license plates and would be exempted from wheel cover, mudguard, flap, or splash-apron requirements. Slated to go into effect on July 1, 2012, the new law defines a “vintage travel trailer” as a travel trailer, camping trailer or fifth-wheel trailer that is 30 years old or older and is primarily a collector’s item that is used for participation in club activities, exhibitions, tours, parades, occasional recreational or vacation use and other similar uses.

Virginia
License Tax:

SEMA helped defeat legislation that originally threatened to provide localities with the authority to raise from $100 to $500 the amount charged for an annual license tax for vehicles that do not display current license plates. Virginia Governor Bob McDonnell vetoed a substitute bill containing SEMA-drafted amendments. The SEMA amendments exempted from the license tax all vehicles and parts cars stored on private property for the purpose of restoration or repair.

West Virginia
Property Tax:

A bill to provide a cap on property taxes paid by owners of antique and classic motor vehicles was vetoed by Governor Early Ray Tomblin due to a technical issue. The bill had been amended and approved by the West Virginia State Legislature with a new $5,000 assessed value for all of these cars. Previous versions of the bill contained an assessed value provision of $1,000. Generally, the bill vetoed by the governor benefited antique and classic vehicle owners whose cars are worth more than $5,000. However, it would have penalized most antique and classic vehicle owners whose cars are worth less than $5,000. The legislature chose not to call an additional vote on the bill in an attempt to override the veto.

Wisconsin
Motor Vehicle Registration Rights:

Legislation that originally sought to provide legal registration to hobby vehicles with clear titles, required safety equipment and in good working order was signed into law by Governor Scott Walker. Due to opposition from the Wisconsin Department of Transportation, the bill was amended to now affect only former military vehicles. Several pro-hobby provisions of the bill with application to all hobby vehicles were eliminated. While the amended bill does not solve the many problems associated with registering a hobby car in Wisconsin, it still gained SEMA’s support since it improves the rules governing former military vehicles.

FEDERAL UPDATE

Small Public Companies:

President Obama signed into law a bipartisan bill designed to remove regulatory barriers for companies going public and seeking to attract investors. The SEMA-supported “Jumpstart Our Business Startups” Act makes it easier for small companies to comply with Securities and Exchange Commission (SEC) rules when securing outside capital investment. Companies will be able to file initial public offerings more quickly as regulations will be phased in over a period of five years. The legislation raises the threshold number of shareholders triggering SEC registration from 500 to 2,000 and increases the offering threshold from $5 million to $50 million in shares. Companies can raise capital using the Internet and social media so long as the website is registered with the SEC and investors are informed about a company’s financial condition and shareholder risks. Individual investments are limited to 5% of annual income for those earning under $100,000 a year and 10% for those earning above that amount. Companies with gross annual revenues of up to $1 billion can sell shares to the public while being exempted from some of the requirements of the Sarbanes-Oxley Act.

Certain Steel Wheels from China:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The U.S. International Trade Administration has issued final duty rates for certain steel wheels from China that are being sold at less than fair value in the United States. The subject wheels range from 18 to 24.5 inches in diameter and include rims and discs whether imported as an assembly or separately. The wheels are typically used in commercial vehicles (trucks, buses, trailers, etc.), but duty rates also apply to passenger car wheels within that size range. Calculations for the final dumping margins range from 44.96% to 193.54% ad valorem, and countervailing duties range from 25.66% to 38.32% ad valorem. The duties are on hold until the U.S. International Trade Commission confirms that the dumping and unfair subsidies are causing harm to U.S. industry.

Highway Bill:

The U.S. Senate passed its version of legislation to fund highway construction and other transportation projects over the next two years. SEMA supports the bill’s maintenance of current funding levels in order to address the nation’s aging infrastructure and provide states with more spending flexibility. The legislation also would dramatically increase fines for vehicle or equipment recalls and include mandates to address distracted driving, unintended acceleration and pedal placement and require installation of event data recorders. SEMA contends that current civil penalties are already higher than those imposed on manufacturers for many other types of consumer products, and the National Highway Traffic Safety Administration is already addressing the other issues. The legislation has been sent to the House of Representatives, which is attempting to draft its own bill for a five-year plan. The draft bill currently does not include the auto safety provisions. The government’s authority to fund highway programs expires on June 30.

Ethanol Fuel:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The EPA has begun approving applications by fuel producers to blend gasoline with 15% ethanol (E15). However, there are several other regulatory hurdles to be met before the fuel can be offered for sale. Gas stations will not be required to sell the fuel, and the federal government and most states have not yet enacted laws to shield the industry (gas stations, fuel producers, automakers, auto parts manufacturers, etc.) from lawsuits by consumers who allege that E15 caused mechanical breakdowns. Ethanol increases water formation in the gas tank, which can then produce formic acid and corrode certain metal, plastic and rubber parts. Last year, the EPA approved the sale of E15 for model-year 2001 and later vehicles. The EPA agreed with SEMA’s concerns that ethanol poses a threat to older vehicles and made it “illegal” to fuel pre-2001 vehicles with E15. A court is expected to rule this summer on a lawsuit challenging the EPA waivers. SEMA is working with a diverse coalition of other associations to oppose the introduction of E15.

Forest Service Planning Rule:

The U.S. Forest Service updated its “Planning Rule,” which provides guidance and directives for managing the country’s 155 national forests and 20 grasslands encompassing 193 million acres. The courts have rejected previous versions of the Planning Rule in recent years. SEMA joined with a number of other organizations representing the off-road community in opposing the latest version on grounds that it does not adequately protect access for motorized recreation and will be a source of ongoing litigation. Lawmakers attending a recent U.S. House Natural Resources Subcommittee hearing expressed similar concerns, noting that the rule incorporates a number of undefined terms and does not ensure a “full mix of recreational opportunities.” The issue is of importance to SEMA-member companies that market products to the off-road community based on the consumers’ ability to have access to Forest Service roads and trails. Forest managers will now begin applying the rule’s guidelines as they gradually update management rules for each individual forest and grassland.

Fri, 06/01/2012 - 10:13

SEMA News—June 2012

LEGISLATIVE & TECHNICAL AFFAIRS
By Steve McDonald

Law and Order

Law and Order is an update of some of the most recent federal and state legislative and regulatory issues that could potentially impact the automotive specialty-equipment industry. These include issues affecting small-business owners and their employees.  

STATE UPDATE

California
Specially Constructed Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation 
   
For the past several years, SEMA has been working with the California legislature and state agencies to provide protection for owners of improperly or illegally titled and registered specially constructed vehicles (SPCNS). Under a looming threat of prosecution, this program was pursued to help vehicle owners and builders avoid a situation that could have led to confiscated cars and felony law enforcement actions. Beginning July 1, 2011, an amnesty program to allow proper registration of previously registered SPCNS went into effect. The program is slated to conclude on June 30, 2012. Working with the Bureau of Automotive Repair (BAR) and the Department of Motor Vehicles (DMV), SEMA has finally resolved program implementation problems on behalf of California SPCNS owners seeking amnesty. These solutions permit these owners and builders to demonstrate compliance with current BAR smog-check tailpipe emissions requirements in addition to providing amnesty for owners who have knowingly made false statements regarding the value of these vehicles, the year of manufacture or knowingly falsified any other facts in documents filed with the DMV or Highway Patrol.

California
Emissions Exemption:

SEMA-supported legislation to exempt all motor vehicles prior to the 1981 model year from the emissions inspection requirement has been granted reconsideration after failing to be approved by the Senate Transportation and Housing Committee on a 3-4 vote. The bill will be reconsidered in a future committee hearing. In 2004, legislation was enacted to repeal California’s rolling emissions-test exemption for vehicles 30 years old and older and replace it with a law requiring the lifetime testing of all 1976 and newer model-year vehicles.

Connecticut
Antique/Rare/Special-Interest Motor Vehicles:

SEMA-opposed legislation to increase the age requirement for vehicles eligible for registration as “antique, rare or special-interest motor vehicles” was approved by the Connecticut Joint Committee on Planning and Development by a narrow 10-9 vote. Under the bill, vehicles to be registered as antique, rare or special-interest motor vehicles would be required to be at least 30 years old. Currently, vehicles 20 years old or older are eligible for this status and special license plates. For the purpose of property taxes, the bill also increases the maximum assessment of these vehicles from $500 to $2,500. The bill will now be sent to the Connecticut House of Representatives for a vote by all members.

Hawaii
Low-Mileage Credit:

SEMA is supporting resolutions introduced in the Hawaii House of Representatives urging the city and county of Honolulu to create a 10% vehicle registration credit for residents who drive limited miles in their vehicles, such as rarely used hobby cars. The resolutions were introduced to offset the burden put on certain vehicle owners by increased registration fees. Under the resolutions, the credit would extend to any resident who is registering a vehicle and can provide the two most recent safety inspections (at least 11 months apart) showing that less than 3,000 miles were driven between the two inspections.

Michigan
Ethanol:

SEMA is supporting Michigan legislation requiring retail dealers that offer gasoline for sale to label those pumps dispensing ethanol-blended gasoline with a notice that indicates the grade of gasoline and the percentage of ethanol contained. Under current Michigan law, gasoline that contains 10% or less ethanol is not subject to the labeling requirement. The bill provides that a person who violates the labeling requirement is liable for a civil fine up to $1,000 for each day the violation continues.

Nebraska
Special-Interest Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
SEMA-supported legislation to create a registration class and special license plate for special-interest motor vehicles was signed into law by Governor Dave Heineman. The new law authorizes owners of special-interest motor vehicles to operate them on Nebraska’s roads displaying a single license plate on the rear of the vehicle. Under the new law, special-interest motor vehicles are defined as those vehicles “of any age which are being collected, preserved, restored, or maintained by the owner as a leisure pursuit and not used for general transportation of persons or cargo.” Under a SEMA-drafted amendment, special-interest motor vehicles may be driven on public streets and roads for occasional transportation, public displays, parades and related pleasure or hobby activities. SEMA worked with the bill sponsor and staff to delete provisions in the original bill that would have required proof of membership in a recognized car club; forced owners to account for all daily-driver vehicles owned or operated by the applicant; obligated owners to a sworn affidavit that the vehicle would not be used for daily transportation; and mandated that these vehicles be essentially unaltered from the original manufacturer’s specifications.

New Jersey
Emissions Exemption:

In 2010, SEMA-supported legislation to extend the emissions inspection exemption to vehicles five model years old or newer was signed into law, subject to approval by the U.S. Environmental Protection Agency (EPA). Previous law exempted only vehicles four model years old or newer. The EPA has now incorporated revisions to the State Implementation Plan (SIP) submitted by the New Jersey Department of Environmental Protection to include the extension of the new vehicle inspection exemption from four years to five years. This action acknowledges the relatively minimal environmental impact of the vehicles targeted for this exemption and that it is senseless to test newer vehicles, the results of which demonstrate no significant air quality benefits.

Pennsylvania
Year-of-Manufacture Plates:

SEMA-supported legislation to provide vehicle owners with the option of using vintage, original model-year license plates on antique and classic vehicles was signed into law by Governor Tom Corbett. Under the bill, an application fee of $75 would be charged to use year-of-manufacture plates. Under the measure, vintage plates must have been issued by the state between the years 1906 and 1975, must be provided by the vehicle owner and be legible from a reasonable distance. Under current law, antique-vehicle owners may apply for special antique, classic or collectible plates that bear the designation “antique vehicle.” These plates would still be available to state hobbyists if the bill is signed into law.

Texas Street
Rods/Custom Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The Texas Department of Motor Vehicles (DMV) has issued its policies and procedures for issuance of titles and specialty license plates to owners who seek to register their vehicle as street rods or custom vehicles. The policy also provides for a basic safety equipment inspection to be performed by an Automotive Service Excellence (ASE) master technician. These procedures were drafted pursuant to the 2011 enactment into law of SEMA-model legislation. Originally slated to go into effect on September 1, 2011, the new law defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured after 1948. The law also allows for the use of non-original materials and creates a titling and registration criterion that assigns these vehicles the same model-year designations as the production vehicles they most closely resemble. In addition, the law holds only street rods, customs and replicas to the equipment standards specified by law during the model year listed on the title of the vehicle. Unfortunately, due to a flawed interpretation of the law by the DMV, all vehicles seeking registration as street rods and custom vehicles must carry a title with a “Replica” brand—even those vehicles altered from original steel bodies. According to the DMV, any changes to that policy must be provided to the agency through amendments to the law. SEMA is currently in the process of contacting members of the Texas legislature to seek additional legislation to correct this flaw. The Texas legislature does not meet for a regular 2012 session, requiring legislation to be introduced in 2013. In the meantime, the new polices should accommodate owners of replica street rods and custom vehicles.

Utah
Vintage Travel Trailers:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
A SEMA-supported bill to create a statutory definition of a “vintage travel trailer” and provide for a one-time $40 registration fee was signed into law by Governor Gary Herbert. Under the law, vintage travel trailers would also be eligible for special group license plates and would be exempted from wheel cover, mudguard, flap, or splash-apron requirements. Slated to go into effect on July 1, 2012, the new law defines a “vintage travel trailer” as a travel trailer, camping trailer or fifth-wheel trailer that is 30 years old or older and is primarily a collector’s item that is used for participation in club activities, exhibitions, tours, parades, occasional recreational or vacation use and other similar uses.

Virginia
License Tax:

SEMA helped defeat legislation that originally threatened to provide localities with the authority to raise from $100 to $500 the amount charged for an annual license tax for vehicles that do not display current license plates. Virginia Governor Bob McDonnell vetoed a substitute bill containing SEMA-drafted amendments. The SEMA amendments exempted from the license tax all vehicles and parts cars stored on private property for the purpose of restoration or repair.

West Virginia
Property Tax:

A bill to provide a cap on property taxes paid by owners of antique and classic motor vehicles was vetoed by Governor Early Ray Tomblin due to a technical issue. The bill had been amended and approved by the West Virginia State Legislature with a new $5,000 assessed value for all of these cars. Previous versions of the bill contained an assessed value provision of $1,000. Generally, the bill vetoed by the governor benefited antique and classic vehicle owners whose cars are worth more than $5,000. However, it would have penalized most antique and classic vehicle owners whose cars are worth less than $5,000. The legislature chose not to call an additional vote on the bill in an attempt to override the veto.

Wisconsin
Motor Vehicle Registration Rights:

Legislation that originally sought to provide legal registration to hobby vehicles with clear titles, required safety equipment and in good working order was signed into law by Governor Scott Walker. Due to opposition from the Wisconsin Department of Transportation, the bill was amended to now affect only former military vehicles. Several pro-hobby provisions of the bill with application to all hobby vehicles were eliminated. While the amended bill does not solve the many problems associated with registering a hobby car in Wisconsin, it still gained SEMA’s support since it improves the rules governing former military vehicles.

FEDERAL UPDATE

Small Public Companies:

President Obama signed into law a bipartisan bill designed to remove regulatory barriers for companies going public and seeking to attract investors. The SEMA-supported “Jumpstart Our Business Startups” Act makes it easier for small companies to comply with Securities and Exchange Commission (SEC) rules when securing outside capital investment. Companies will be able to file initial public offerings more quickly as regulations will be phased in over a period of five years. The legislation raises the threshold number of shareholders triggering SEC registration from 500 to 2,000 and increases the offering threshold from $5 million to $50 million in shares. Companies can raise capital using the Internet and social media so long as the website is registered with the SEC and investors are informed about a company’s financial condition and shareholder risks. Individual investments are limited to 5% of annual income for those earning under $100,000 a year and 10% for those earning above that amount. Companies with gross annual revenues of up to $1 billion can sell shares to the public while being exempted from some of the requirements of the Sarbanes-Oxley Act.

Certain Steel Wheels from China:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The U.S. International Trade Administration has issued final duty rates for certain steel wheels from China that are being sold at less than fair value in the United States. The subject wheels range from 18 to 24.5 inches in diameter and include rims and discs whether imported as an assembly or separately. The wheels are typically used in commercial vehicles (trucks, buses, trailers, etc.), but duty rates also apply to passenger car wheels within that size range. Calculations for the final dumping margins range from 44.96% to 193.54% ad valorem, and countervailing duties range from 25.66% to 38.32% ad valorem. The duties are on hold until the U.S. International Trade Commission confirms that the dumping and unfair subsidies are causing harm to U.S. industry.

Highway Bill:

The U.S. Senate passed its version of legislation to fund highway construction and other transportation projects over the next two years. SEMA supports the bill’s maintenance of current funding levels in order to address the nation’s aging infrastructure and provide states with more spending flexibility. The legislation also would dramatically increase fines for vehicle or equipment recalls and include mandates to address distracted driving, unintended acceleration and pedal placement and require installation of event data recorders. SEMA contends that current civil penalties are already higher than those imposed on manufacturers for many other types of consumer products, and the National Highway Traffic Safety Administration is already addressing the other issues. The legislation has been sent to the House of Representatives, which is attempting to draft its own bill for a five-year plan. The draft bill currently does not include the auto safety provisions. The government’s authority to fund highway programs expires on June 30.

Ethanol Fuel:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The EPA has begun approving applications by fuel producers to blend gasoline with 15% ethanol (E15). However, there are several other regulatory hurdles to be met before the fuel can be offered for sale. Gas stations will not be required to sell the fuel, and the federal government and most states have not yet enacted laws to shield the industry (gas stations, fuel producers, automakers, auto parts manufacturers, etc.) from lawsuits by consumers who allege that E15 caused mechanical breakdowns. Ethanol increases water formation in the gas tank, which can then produce formic acid and corrode certain metal, plastic and rubber parts. Last year, the EPA approved the sale of E15 for model-year 2001 and later vehicles. The EPA agreed with SEMA’s concerns that ethanol poses a threat to older vehicles and made it “illegal” to fuel pre-2001 vehicles with E15. A court is expected to rule this summer on a lawsuit challenging the EPA waivers. SEMA is working with a diverse coalition of other associations to oppose the introduction of E15.

Forest Service Planning Rule:

The U.S. Forest Service updated its “Planning Rule,” which provides guidance and directives for managing the country’s 155 national forests and 20 grasslands encompassing 193 million acres. The courts have rejected previous versions of the Planning Rule in recent years. SEMA joined with a number of other organizations representing the off-road community in opposing the latest version on grounds that it does not adequately protect access for motorized recreation and will be a source of ongoing litigation. Lawmakers attending a recent U.S. House Natural Resources Subcommittee hearing expressed similar concerns, noting that the rule incorporates a number of undefined terms and does not ensure a “full mix of recreational opportunities.” The issue is of importance to SEMA-member companies that market products to the off-road community based on the consumers’ ability to have access to Forest Service roads and trails. Forest managers will now begin applying the rule’s guidelines as they gradually update management rules for each individual forest and grassland.

Fri, 06/01/2012 - 10:13

SEMA News—June 2012

LEGISLATIVE & TECHNICAL AFFAIRS
By Steve McDonald

Law and Order

Law and Order is an update of some of the most recent federal and state legislative and regulatory issues that could potentially impact the automotive specialty-equipment industry. These include issues affecting small-business owners and their employees.  

STATE UPDATE

California
Specially Constructed Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation 
   
For the past several years, SEMA has been working with the California legislature and state agencies to provide protection for owners of improperly or illegally titled and registered specially constructed vehicles (SPCNS). Under a looming threat of prosecution, this program was pursued to help vehicle owners and builders avoid a situation that could have led to confiscated cars and felony law enforcement actions. Beginning July 1, 2011, an amnesty program to allow proper registration of previously registered SPCNS went into effect. The program is slated to conclude on June 30, 2012. Working with the Bureau of Automotive Repair (BAR) and the Department of Motor Vehicles (DMV), SEMA has finally resolved program implementation problems on behalf of California SPCNS owners seeking amnesty. These solutions permit these owners and builders to demonstrate compliance with current BAR smog-check tailpipe emissions requirements in addition to providing amnesty for owners who have knowingly made false statements regarding the value of these vehicles, the year of manufacture or knowingly falsified any other facts in documents filed with the DMV or Highway Patrol.

California
Emissions Exemption:

SEMA-supported legislation to exempt all motor vehicles prior to the 1981 model year from the emissions inspection requirement has been granted reconsideration after failing to be approved by the Senate Transportation and Housing Committee on a 3-4 vote. The bill will be reconsidered in a future committee hearing. In 2004, legislation was enacted to repeal California’s rolling emissions-test exemption for vehicles 30 years old and older and replace it with a law requiring the lifetime testing of all 1976 and newer model-year vehicles.

Connecticut
Antique/Rare/Special-Interest Motor Vehicles:

SEMA-opposed legislation to increase the age requirement for vehicles eligible for registration as “antique, rare or special-interest motor vehicles” was approved by the Connecticut Joint Committee on Planning and Development by a narrow 10-9 vote. Under the bill, vehicles to be registered as antique, rare or special-interest motor vehicles would be required to be at least 30 years old. Currently, vehicles 20 years old or older are eligible for this status and special license plates. For the purpose of property taxes, the bill also increases the maximum assessment of these vehicles from $500 to $2,500. The bill will now be sent to the Connecticut House of Representatives for a vote by all members.

Hawaii
Low-Mileage Credit:

SEMA is supporting resolutions introduced in the Hawaii House of Representatives urging the city and county of Honolulu to create a 10% vehicle registration credit for residents who drive limited miles in their vehicles, such as rarely used hobby cars. The resolutions were introduced to offset the burden put on certain vehicle owners by increased registration fees. Under the resolutions, the credit would extend to any resident who is registering a vehicle and can provide the two most recent safety inspections (at least 11 months apart) showing that less than 3,000 miles were driven between the two inspections.

Michigan
Ethanol:

SEMA is supporting Michigan legislation requiring retail dealers that offer gasoline for sale to label those pumps dispensing ethanol-blended gasoline with a notice that indicates the grade of gasoline and the percentage of ethanol contained. Under current Michigan law, gasoline that contains 10% or less ethanol is not subject to the labeling requirement. The bill provides that a person who violates the labeling requirement is liable for a civil fine up to $1,000 for each day the violation continues.

Nebraska
Special-Interest Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
SEMA-supported legislation to create a registration class and special license plate for special-interest motor vehicles was signed into law by Governor Dave Heineman. The new law authorizes owners of special-interest motor vehicles to operate them on Nebraska’s roads displaying a single license plate on the rear of the vehicle. Under the new law, special-interest motor vehicles are defined as those vehicles “of any age which are being collected, preserved, restored, or maintained by the owner as a leisure pursuit and not used for general transportation of persons or cargo.” Under a SEMA-drafted amendment, special-interest motor vehicles may be driven on public streets and roads for occasional transportation, public displays, parades and related pleasure or hobby activities. SEMA worked with the bill sponsor and staff to delete provisions in the original bill that would have required proof of membership in a recognized car club; forced owners to account for all daily-driver vehicles owned or operated by the applicant; obligated owners to a sworn affidavit that the vehicle would not be used for daily transportation; and mandated that these vehicles be essentially unaltered from the original manufacturer’s specifications.

New Jersey
Emissions Exemption:

In 2010, SEMA-supported legislation to extend the emissions inspection exemption to vehicles five model years old or newer was signed into law, subject to approval by the U.S. Environmental Protection Agency (EPA). Previous law exempted only vehicles four model years old or newer. The EPA has now incorporated revisions to the State Implementation Plan (SIP) submitted by the New Jersey Department of Environmental Protection to include the extension of the new vehicle inspection exemption from four years to five years. This action acknowledges the relatively minimal environmental impact of the vehicles targeted for this exemption and that it is senseless to test newer vehicles, the results of which demonstrate no significant air quality benefits.

Pennsylvania
Year-of-Manufacture Plates:

SEMA-supported legislation to provide vehicle owners with the option of using vintage, original model-year license plates on antique and classic vehicles was signed into law by Governor Tom Corbett. Under the bill, an application fee of $75 would be charged to use year-of-manufacture plates. Under the measure, vintage plates must have been issued by the state between the years 1906 and 1975, must be provided by the vehicle owner and be legible from a reasonable distance. Under current law, antique-vehicle owners may apply for special antique, classic or collectible plates that bear the designation “antique vehicle.” These plates would still be available to state hobbyists if the bill is signed into law.

Texas Street
Rods/Custom Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The Texas Department of Motor Vehicles (DMV) has issued its policies and procedures for issuance of titles and specialty license plates to owners who seek to register their vehicle as street rods or custom vehicles. The policy also provides for a basic safety equipment inspection to be performed by an Automotive Service Excellence (ASE) master technician. These procedures were drafted pursuant to the 2011 enactment into law of SEMA-model legislation. Originally slated to go into effect on September 1, 2011, the new law defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured after 1948. The law also allows for the use of non-original materials and creates a titling and registration criterion that assigns these vehicles the same model-year designations as the production vehicles they most closely resemble. In addition, the law holds only street rods, customs and replicas to the equipment standards specified by law during the model year listed on the title of the vehicle. Unfortunately, due to a flawed interpretation of the law by the DMV, all vehicles seeking registration as street rods and custom vehicles must carry a title with a “Replica” brand—even those vehicles altered from original steel bodies. According to the DMV, any changes to that policy must be provided to the agency through amendments to the law. SEMA is currently in the process of contacting members of the Texas legislature to seek additional legislation to correct this flaw. The Texas legislature does not meet for a regular 2012 session, requiring legislation to be introduced in 2013. In the meantime, the new polices should accommodate owners of replica street rods and custom vehicles.

Utah
Vintage Travel Trailers:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
A SEMA-supported bill to create a statutory definition of a “vintage travel trailer” and provide for a one-time $40 registration fee was signed into law by Governor Gary Herbert. Under the law, vintage travel trailers would also be eligible for special group license plates and would be exempted from wheel cover, mudguard, flap, or splash-apron requirements. Slated to go into effect on July 1, 2012, the new law defines a “vintage travel trailer” as a travel trailer, camping trailer or fifth-wheel trailer that is 30 years old or older and is primarily a collector’s item that is used for participation in club activities, exhibitions, tours, parades, occasional recreational or vacation use and other similar uses.

Virginia
License Tax:

SEMA helped defeat legislation that originally threatened to provide localities with the authority to raise from $100 to $500 the amount charged for an annual license tax for vehicles that do not display current license plates. Virginia Governor Bob McDonnell vetoed a substitute bill containing SEMA-drafted amendments. The SEMA amendments exempted from the license tax all vehicles and parts cars stored on private property for the purpose of restoration or repair.

West Virginia
Property Tax:

A bill to provide a cap on property taxes paid by owners of antique and classic motor vehicles was vetoed by Governor Early Ray Tomblin due to a technical issue. The bill had been amended and approved by the West Virginia State Legislature with a new $5,000 assessed value for all of these cars. Previous versions of the bill contained an assessed value provision of $1,000. Generally, the bill vetoed by the governor benefited antique and classic vehicle owners whose cars are worth more than $5,000. However, it would have penalized most antique and classic vehicle owners whose cars are worth less than $5,000. The legislature chose not to call an additional vote on the bill in an attempt to override the veto.

Wisconsin
Motor Vehicle Registration Rights:

Legislation that originally sought to provide legal registration to hobby vehicles with clear titles, required safety equipment and in good working order was signed into law by Governor Scott Walker. Due to opposition from the Wisconsin Department of Transportation, the bill was amended to now affect only former military vehicles. Several pro-hobby provisions of the bill with application to all hobby vehicles were eliminated. While the amended bill does not solve the many problems associated with registering a hobby car in Wisconsin, it still gained SEMA’s support since it improves the rules governing former military vehicles.

FEDERAL UPDATE

Small Public Companies:

President Obama signed into law a bipartisan bill designed to remove regulatory barriers for companies going public and seeking to attract investors. The SEMA-supported “Jumpstart Our Business Startups” Act makes it easier for small companies to comply with Securities and Exchange Commission (SEC) rules when securing outside capital investment. Companies will be able to file initial public offerings more quickly as regulations will be phased in over a period of five years. The legislation raises the threshold number of shareholders triggering SEC registration from 500 to 2,000 and increases the offering threshold from $5 million to $50 million in shares. Companies can raise capital using the Internet and social media so long as the website is registered with the SEC and investors are informed about a company’s financial condition and shareholder risks. Individual investments are limited to 5% of annual income for those earning under $100,000 a year and 10% for those earning above that amount. Companies with gross annual revenues of up to $1 billion can sell shares to the public while being exempted from some of the requirements of the Sarbanes-Oxley Act.

Certain Steel Wheels from China:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The U.S. International Trade Administration has issued final duty rates for certain steel wheels from China that are being sold at less than fair value in the United States. The subject wheels range from 18 to 24.5 inches in diameter and include rims and discs whether imported as an assembly or separately. The wheels are typically used in commercial vehicles (trucks, buses, trailers, etc.), but duty rates also apply to passenger car wheels within that size range. Calculations for the final dumping margins range from 44.96% to 193.54% ad valorem, and countervailing duties range from 25.66% to 38.32% ad valorem. The duties are on hold until the U.S. International Trade Commission confirms that the dumping and unfair subsidies are causing harm to U.S. industry.

Highway Bill:

The U.S. Senate passed its version of legislation to fund highway construction and other transportation projects over the next two years. SEMA supports the bill’s maintenance of current funding levels in order to address the nation’s aging infrastructure and provide states with more spending flexibility. The legislation also would dramatically increase fines for vehicle or equipment recalls and include mandates to address distracted driving, unintended acceleration and pedal placement and require installation of event data recorders. SEMA contends that current civil penalties are already higher than those imposed on manufacturers for many other types of consumer products, and the National Highway Traffic Safety Administration is already addressing the other issues. The legislation has been sent to the House of Representatives, which is attempting to draft its own bill for a five-year plan. The draft bill currently does not include the auto safety provisions. The government’s authority to fund highway programs expires on June 30.

Ethanol Fuel:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The EPA has begun approving applications by fuel producers to blend gasoline with 15% ethanol (E15). However, there are several other regulatory hurdles to be met before the fuel can be offered for sale. Gas stations will not be required to sell the fuel, and the federal government and most states have not yet enacted laws to shield the industry (gas stations, fuel producers, automakers, auto parts manufacturers, etc.) from lawsuits by consumers who allege that E15 caused mechanical breakdowns. Ethanol increases water formation in the gas tank, which can then produce formic acid and corrode certain metal, plastic and rubber parts. Last year, the EPA approved the sale of E15 for model-year 2001 and later vehicles. The EPA agreed with SEMA’s concerns that ethanol poses a threat to older vehicles and made it “illegal” to fuel pre-2001 vehicles with E15. A court is expected to rule this summer on a lawsuit challenging the EPA waivers. SEMA is working with a diverse coalition of other associations to oppose the introduction of E15.

Forest Service Planning Rule:

The U.S. Forest Service updated its “Planning Rule,” which provides guidance and directives for managing the country’s 155 national forests and 20 grasslands encompassing 193 million acres. The courts have rejected previous versions of the Planning Rule in recent years. SEMA joined with a number of other organizations representing the off-road community in opposing the latest version on grounds that it does not adequately protect access for motorized recreation and will be a source of ongoing litigation. Lawmakers attending a recent U.S. House Natural Resources Subcommittee hearing expressed similar concerns, noting that the rule incorporates a number of undefined terms and does not ensure a “full mix of recreational opportunities.” The issue is of importance to SEMA-member companies that market products to the off-road community based on the consumers’ ability to have access to Forest Service roads and trails. Forest managers will now begin applying the rule’s guidelines as they gradually update management rules for each individual forest and grassland.

Fri, 06/01/2012 - 10:13

SEMA News—June 2012

LEGISLATIVE & TECHNICAL AFFAIRS
By Steve McDonald

Law and Order

Law and Order is an update of some of the most recent federal and state legislative and regulatory issues that could potentially impact the automotive specialty-equipment industry. These include issues affecting small-business owners and their employees.  

STATE UPDATE

California
Specially Constructed Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation 
   
For the past several years, SEMA has been working with the California legislature and state agencies to provide protection for owners of improperly or illegally titled and registered specially constructed vehicles (SPCNS). Under a looming threat of prosecution, this program was pursued to help vehicle owners and builders avoid a situation that could have led to confiscated cars and felony law enforcement actions. Beginning July 1, 2011, an amnesty program to allow proper registration of previously registered SPCNS went into effect. The program is slated to conclude on June 30, 2012. Working with the Bureau of Automotive Repair (BAR) and the Department of Motor Vehicles (DMV), SEMA has finally resolved program implementation problems on behalf of California SPCNS owners seeking amnesty. These solutions permit these owners and builders to demonstrate compliance with current BAR smog-check tailpipe emissions requirements in addition to providing amnesty for owners who have knowingly made false statements regarding the value of these vehicles, the year of manufacture or knowingly falsified any other facts in documents filed with the DMV or Highway Patrol.

California
Emissions Exemption:

SEMA-supported legislation to exempt all motor vehicles prior to the 1981 model year from the emissions inspection requirement has been granted reconsideration after failing to be approved by the Senate Transportation and Housing Committee on a 3-4 vote. The bill will be reconsidered in a future committee hearing. In 2004, legislation was enacted to repeal California’s rolling emissions-test exemption for vehicles 30 years old and older and replace it with a law requiring the lifetime testing of all 1976 and newer model-year vehicles.

Connecticut
Antique/Rare/Special-Interest Motor Vehicles:

SEMA-opposed legislation to increase the age requirement for vehicles eligible for registration as “antique, rare or special-interest motor vehicles” was approved by the Connecticut Joint Committee on Planning and Development by a narrow 10-9 vote. Under the bill, vehicles to be registered as antique, rare or special-interest motor vehicles would be required to be at least 30 years old. Currently, vehicles 20 years old or older are eligible for this status and special license plates. For the purpose of property taxes, the bill also increases the maximum assessment of these vehicles from $500 to $2,500. The bill will now be sent to the Connecticut House of Representatives for a vote by all members.

Hawaii
Low-Mileage Credit:

SEMA is supporting resolutions introduced in the Hawaii House of Representatives urging the city and county of Honolulu to create a 10% vehicle registration credit for residents who drive limited miles in their vehicles, such as rarely used hobby cars. The resolutions were introduced to offset the burden put on certain vehicle owners by increased registration fees. Under the resolutions, the credit would extend to any resident who is registering a vehicle and can provide the two most recent safety inspections (at least 11 months apart) showing that less than 3,000 miles were driven between the two inspections.

Michigan
Ethanol:

SEMA is supporting Michigan legislation requiring retail dealers that offer gasoline for sale to label those pumps dispensing ethanol-blended gasoline with a notice that indicates the grade of gasoline and the percentage of ethanol contained. Under current Michigan law, gasoline that contains 10% or less ethanol is not subject to the labeling requirement. The bill provides that a person who violates the labeling requirement is liable for a civil fine up to $1,000 for each day the violation continues.

Nebraska
Special-Interest Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
SEMA-supported legislation to create a registration class and special license plate for special-interest motor vehicles was signed into law by Governor Dave Heineman. The new law authorizes owners of special-interest motor vehicles to operate them on Nebraska’s roads displaying a single license plate on the rear of the vehicle. Under the new law, special-interest motor vehicles are defined as those vehicles “of any age which are being collected, preserved, restored, or maintained by the owner as a leisure pursuit and not used for general transportation of persons or cargo.” Under a SEMA-drafted amendment, special-interest motor vehicles may be driven on public streets and roads for occasional transportation, public displays, parades and related pleasure or hobby activities. SEMA worked with the bill sponsor and staff to delete provisions in the original bill that would have required proof of membership in a recognized car club; forced owners to account for all daily-driver vehicles owned or operated by the applicant; obligated owners to a sworn affidavit that the vehicle would not be used for daily transportation; and mandated that these vehicles be essentially unaltered from the original manufacturer’s specifications.

New Jersey
Emissions Exemption:

In 2010, SEMA-supported legislation to extend the emissions inspection exemption to vehicles five model years old or newer was signed into law, subject to approval by the U.S. Environmental Protection Agency (EPA). Previous law exempted only vehicles four model years old or newer. The EPA has now incorporated revisions to the State Implementation Plan (SIP) submitted by the New Jersey Department of Environmental Protection to include the extension of the new vehicle inspection exemption from four years to five years. This action acknowledges the relatively minimal environmental impact of the vehicles targeted for this exemption and that it is senseless to test newer vehicles, the results of which demonstrate no significant air quality benefits.

Pennsylvania
Year-of-Manufacture Plates:

SEMA-supported legislation to provide vehicle owners with the option of using vintage, original model-year license plates on antique and classic vehicles was signed into law by Governor Tom Corbett. Under the bill, an application fee of $75 would be charged to use year-of-manufacture plates. Under the measure, vintage plates must have been issued by the state between the years 1906 and 1975, must be provided by the vehicle owner and be legible from a reasonable distance. Under current law, antique-vehicle owners may apply for special antique, classic or collectible plates that bear the designation “antique vehicle.” These plates would still be available to state hobbyists if the bill is signed into law.

Texas Street
Rods/Custom Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The Texas Department of Motor Vehicles (DMV) has issued its policies and procedures for issuance of titles and specialty license plates to owners who seek to register their vehicle as street rods or custom vehicles. The policy also provides for a basic safety equipment inspection to be performed by an Automotive Service Excellence (ASE) master technician. These procedures were drafted pursuant to the 2011 enactment into law of SEMA-model legislation. Originally slated to go into effect on September 1, 2011, the new law defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured after 1948. The law also allows for the use of non-original materials and creates a titling and registration criterion that assigns these vehicles the same model-year designations as the production vehicles they most closely resemble. In addition, the law holds only street rods, customs and replicas to the equipment standards specified by law during the model year listed on the title of the vehicle. Unfortunately, due to a flawed interpretation of the law by the DMV, all vehicles seeking registration as street rods and custom vehicles must carry a title with a “Replica” brand—even those vehicles altered from original steel bodies. According to the DMV, any changes to that policy must be provided to the agency through amendments to the law. SEMA is currently in the process of contacting members of the Texas legislature to seek additional legislation to correct this flaw. The Texas legislature does not meet for a regular 2012 session, requiring legislation to be introduced in 2013. In the meantime, the new polices should accommodate owners of replica street rods and custom vehicles.

Utah
Vintage Travel Trailers:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
A SEMA-supported bill to create a statutory definition of a “vintage travel trailer” and provide for a one-time $40 registration fee was signed into law by Governor Gary Herbert. Under the law, vintage travel trailers would also be eligible for special group license plates and would be exempted from wheel cover, mudguard, flap, or splash-apron requirements. Slated to go into effect on July 1, 2012, the new law defines a “vintage travel trailer” as a travel trailer, camping trailer or fifth-wheel trailer that is 30 years old or older and is primarily a collector’s item that is used for participation in club activities, exhibitions, tours, parades, occasional recreational or vacation use and other similar uses.

Virginia
License Tax:

SEMA helped defeat legislation that originally threatened to provide localities with the authority to raise from $100 to $500 the amount charged for an annual license tax for vehicles that do not display current license plates. Virginia Governor Bob McDonnell vetoed a substitute bill containing SEMA-drafted amendments. The SEMA amendments exempted from the license tax all vehicles and parts cars stored on private property for the purpose of restoration or repair.

West Virginia
Property Tax:

A bill to provide a cap on property taxes paid by owners of antique and classic motor vehicles was vetoed by Governor Early Ray Tomblin due to a technical issue. The bill had been amended and approved by the West Virginia State Legislature with a new $5,000 assessed value for all of these cars. Previous versions of the bill contained an assessed value provision of $1,000. Generally, the bill vetoed by the governor benefited antique and classic vehicle owners whose cars are worth more than $5,000. However, it would have penalized most antique and classic vehicle owners whose cars are worth less than $5,000. The legislature chose not to call an additional vote on the bill in an attempt to override the veto.

Wisconsin
Motor Vehicle Registration Rights:

Legislation that originally sought to provide legal registration to hobby vehicles with clear titles, required safety equipment and in good working order was signed into law by Governor Scott Walker. Due to opposition from the Wisconsin Department of Transportation, the bill was amended to now affect only former military vehicles. Several pro-hobby provisions of the bill with application to all hobby vehicles were eliminated. While the amended bill does not solve the many problems associated with registering a hobby car in Wisconsin, it still gained SEMA’s support since it improves the rules governing former military vehicles.

FEDERAL UPDATE

Small Public Companies:

President Obama signed into law a bipartisan bill designed to remove regulatory barriers for companies going public and seeking to attract investors. The SEMA-supported “Jumpstart Our Business Startups” Act makes it easier for small companies to comply with Securities and Exchange Commission (SEC) rules when securing outside capital investment. Companies will be able to file initial public offerings more quickly as regulations will be phased in over a period of five years. The legislation raises the threshold number of shareholders triggering SEC registration from 500 to 2,000 and increases the offering threshold from $5 million to $50 million in shares. Companies can raise capital using the Internet and social media so long as the website is registered with the SEC and investors are informed about a company’s financial condition and shareholder risks. Individual investments are limited to 5% of annual income for those earning under $100,000 a year and 10% for those earning above that amount. Companies with gross annual revenues of up to $1 billion can sell shares to the public while being exempted from some of the requirements of the Sarbanes-Oxley Act.

Certain Steel Wheels from China:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The U.S. International Trade Administration has issued final duty rates for certain steel wheels from China that are being sold at less than fair value in the United States. The subject wheels range from 18 to 24.5 inches in diameter and include rims and discs whether imported as an assembly or separately. The wheels are typically used in commercial vehicles (trucks, buses, trailers, etc.), but duty rates also apply to passenger car wheels within that size range. Calculations for the final dumping margins range from 44.96% to 193.54% ad valorem, and countervailing duties range from 25.66% to 38.32% ad valorem. The duties are on hold until the U.S. International Trade Commission confirms that the dumping and unfair subsidies are causing harm to U.S. industry.

Highway Bill:

The U.S. Senate passed its version of legislation to fund highway construction and other transportation projects over the next two years. SEMA supports the bill’s maintenance of current funding levels in order to address the nation’s aging infrastructure and provide states with more spending flexibility. The legislation also would dramatically increase fines for vehicle or equipment recalls and include mandates to address distracted driving, unintended acceleration and pedal placement and require installation of event data recorders. SEMA contends that current civil penalties are already higher than those imposed on manufacturers for many other types of consumer products, and the National Highway Traffic Safety Administration is already addressing the other issues. The legislation has been sent to the House of Representatives, which is attempting to draft its own bill for a five-year plan. The draft bill currently does not include the auto safety provisions. The government’s authority to fund highway programs expires on June 30.

Ethanol Fuel:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The EPA has begun approving applications by fuel producers to blend gasoline with 15% ethanol (E15). However, there are several other regulatory hurdles to be met before the fuel can be offered for sale. Gas stations will not be required to sell the fuel, and the federal government and most states have not yet enacted laws to shield the industry (gas stations, fuel producers, automakers, auto parts manufacturers, etc.) from lawsuits by consumers who allege that E15 caused mechanical breakdowns. Ethanol increases water formation in the gas tank, which can then produce formic acid and corrode certain metal, plastic and rubber parts. Last year, the EPA approved the sale of E15 for model-year 2001 and later vehicles. The EPA agreed with SEMA’s concerns that ethanol poses a threat to older vehicles and made it “illegal” to fuel pre-2001 vehicles with E15. A court is expected to rule this summer on a lawsuit challenging the EPA waivers. SEMA is working with a diverse coalition of other associations to oppose the introduction of E15.

Forest Service Planning Rule:

The U.S. Forest Service updated its “Planning Rule,” which provides guidance and directives for managing the country’s 155 national forests and 20 grasslands encompassing 193 million acres. The courts have rejected previous versions of the Planning Rule in recent years. SEMA joined with a number of other organizations representing the off-road community in opposing the latest version on grounds that it does not adequately protect access for motorized recreation and will be a source of ongoing litigation. Lawmakers attending a recent U.S. House Natural Resources Subcommittee hearing expressed similar concerns, noting that the rule incorporates a number of undefined terms and does not ensure a “full mix of recreational opportunities.” The issue is of importance to SEMA-member companies that market products to the off-road community based on the consumers’ ability to have access to Forest Service roads and trails. Forest managers will now begin applying the rule’s guidelines as they gradually update management rules for each individual forest and grassland.

Fri, 06/01/2012 - 10:13

SEMA News—June 2012

LEGISLATIVE & TECHNICAL AFFAIRS
By Steve McDonald

Law and Order

Law and Order is an update of some of the most recent federal and state legislative and regulatory issues that could potentially impact the automotive specialty-equipment industry. These include issues affecting small-business owners and their employees.  

STATE UPDATE

California
Specially Constructed Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation 
   
For the past several years, SEMA has been working with the California legislature and state agencies to provide protection for owners of improperly or illegally titled and registered specially constructed vehicles (SPCNS). Under a looming threat of prosecution, this program was pursued to help vehicle owners and builders avoid a situation that could have led to confiscated cars and felony law enforcement actions. Beginning July 1, 2011, an amnesty program to allow proper registration of previously registered SPCNS went into effect. The program is slated to conclude on June 30, 2012. Working with the Bureau of Automotive Repair (BAR) and the Department of Motor Vehicles (DMV), SEMA has finally resolved program implementation problems on behalf of California SPCNS owners seeking amnesty. These solutions permit these owners and builders to demonstrate compliance with current BAR smog-check tailpipe emissions requirements in addition to providing amnesty for owners who have knowingly made false statements regarding the value of these vehicles, the year of manufacture or knowingly falsified any other facts in documents filed with the DMV or Highway Patrol.

California
Emissions Exemption:

SEMA-supported legislation to exempt all motor vehicles prior to the 1981 model year from the emissions inspection requirement has been granted reconsideration after failing to be approved by the Senate Transportation and Housing Committee on a 3-4 vote. The bill will be reconsidered in a future committee hearing. In 2004, legislation was enacted to repeal California’s rolling emissions-test exemption for vehicles 30 years old and older and replace it with a law requiring the lifetime testing of all 1976 and newer model-year vehicles.

Connecticut
Antique/Rare/Special-Interest Motor Vehicles:

SEMA-opposed legislation to increase the age requirement for vehicles eligible for registration as “antique, rare or special-interest motor vehicles” was approved by the Connecticut Joint Committee on Planning and Development by a narrow 10-9 vote. Under the bill, vehicles to be registered as antique, rare or special-interest motor vehicles would be required to be at least 30 years old. Currently, vehicles 20 years old or older are eligible for this status and special license plates. For the purpose of property taxes, the bill also increases the maximum assessment of these vehicles from $500 to $2,500. The bill will now be sent to the Connecticut House of Representatives for a vote by all members.

Hawaii
Low-Mileage Credit:

SEMA is supporting resolutions introduced in the Hawaii House of Representatives urging the city and county of Honolulu to create a 10% vehicle registration credit for residents who drive limited miles in their vehicles, such as rarely used hobby cars. The resolutions were introduced to offset the burden put on certain vehicle owners by increased registration fees. Under the resolutions, the credit would extend to any resident who is registering a vehicle and can provide the two most recent safety inspections (at least 11 months apart) showing that less than 3,000 miles were driven between the two inspections.

Michigan
Ethanol:

SEMA is supporting Michigan legislation requiring retail dealers that offer gasoline for sale to label those pumps dispensing ethanol-blended gasoline with a notice that indicates the grade of gasoline and the percentage of ethanol contained. Under current Michigan law, gasoline that contains 10% or less ethanol is not subject to the labeling requirement. The bill provides that a person who violates the labeling requirement is liable for a civil fine up to $1,000 for each day the violation continues.

Nebraska
Special-Interest Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
SEMA-supported legislation to create a registration class and special license plate for special-interest motor vehicles was signed into law by Governor Dave Heineman. The new law authorizes owners of special-interest motor vehicles to operate them on Nebraska’s roads displaying a single license plate on the rear of the vehicle. Under the new law, special-interest motor vehicles are defined as those vehicles “of any age which are being collected, preserved, restored, or maintained by the owner as a leisure pursuit and not used for general transportation of persons or cargo.” Under a SEMA-drafted amendment, special-interest motor vehicles may be driven on public streets and roads for occasional transportation, public displays, parades and related pleasure or hobby activities. SEMA worked with the bill sponsor and staff to delete provisions in the original bill that would have required proof of membership in a recognized car club; forced owners to account for all daily-driver vehicles owned or operated by the applicant; obligated owners to a sworn affidavit that the vehicle would not be used for daily transportation; and mandated that these vehicles be essentially unaltered from the original manufacturer’s specifications.

New Jersey
Emissions Exemption:

In 2010, SEMA-supported legislation to extend the emissions inspection exemption to vehicles five model years old or newer was signed into law, subject to approval by the U.S. Environmental Protection Agency (EPA). Previous law exempted only vehicles four model years old or newer. The EPA has now incorporated revisions to the State Implementation Plan (SIP) submitted by the New Jersey Department of Environmental Protection to include the extension of the new vehicle inspection exemption from four years to five years. This action acknowledges the relatively minimal environmental impact of the vehicles targeted for this exemption and that it is senseless to test newer vehicles, the results of which demonstrate no significant air quality benefits.

Pennsylvania
Year-of-Manufacture Plates:

SEMA-supported legislation to provide vehicle owners with the option of using vintage, original model-year license plates on antique and classic vehicles was signed into law by Governor Tom Corbett. Under the bill, an application fee of $75 would be charged to use year-of-manufacture plates. Under the measure, vintage plates must have been issued by the state between the years 1906 and 1975, must be provided by the vehicle owner and be legible from a reasonable distance. Under current law, antique-vehicle owners may apply for special antique, classic or collectible plates that bear the designation “antique vehicle.” These plates would still be available to state hobbyists if the bill is signed into law.

Texas Street
Rods/Custom Vehicles:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The Texas Department of Motor Vehicles (DMV) has issued its policies and procedures for issuance of titles and specialty license plates to owners who seek to register their vehicle as street rods or custom vehicles. The policy also provides for a basic safety equipment inspection to be performed by an Automotive Service Excellence (ASE) master technician. These procedures were drafted pursuant to the 2011 enactment into law of SEMA-model legislation. Originally slated to go into effect on September 1, 2011, the new law defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured after 1948. The law also allows for the use of non-original materials and creates a titling and registration criterion that assigns these vehicles the same model-year designations as the production vehicles they most closely resemble. In addition, the law holds only street rods, customs and replicas to the equipment standards specified by law during the model year listed on the title of the vehicle. Unfortunately, due to a flawed interpretation of the law by the DMV, all vehicles seeking registration as street rods and custom vehicles must carry a title with a “Replica” brand—even those vehicles altered from original steel bodies. According to the DMV, any changes to that policy must be provided to the agency through amendments to the law. SEMA is currently in the process of contacting members of the Texas legislature to seek additional legislation to correct this flaw. The Texas legislature does not meet for a regular 2012 session, requiring legislation to be introduced in 2013. In the meantime, the new polices should accommodate owners of replica street rods and custom vehicles.

Utah
Vintage Travel Trailers:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
A SEMA-supported bill to create a statutory definition of a “vintage travel trailer” and provide for a one-time $40 registration fee was signed into law by Governor Gary Herbert. Under the law, vintage travel trailers would also be eligible for special group license plates and would be exempted from wheel cover, mudguard, flap, or splash-apron requirements. Slated to go into effect on July 1, 2012, the new law defines a “vintage travel trailer” as a travel trailer, camping trailer or fifth-wheel trailer that is 30 years old or older and is primarily a collector’s item that is used for participation in club activities, exhibitions, tours, parades, occasional recreational or vacation use and other similar uses.

Virginia
License Tax:

SEMA helped defeat legislation that originally threatened to provide localities with the authority to raise from $100 to $500 the amount charged for an annual license tax for vehicles that do not display current license plates. Virginia Governor Bob McDonnell vetoed a substitute bill containing SEMA-drafted amendments. The SEMA amendments exempted from the license tax all vehicles and parts cars stored on private property for the purpose of restoration or repair.

West Virginia
Property Tax:

A bill to provide a cap on property taxes paid by owners of antique and classic motor vehicles was vetoed by Governor Early Ray Tomblin due to a technical issue. The bill had been amended and approved by the West Virginia State Legislature with a new $5,000 assessed value for all of these cars. Previous versions of the bill contained an assessed value provision of $1,000. Generally, the bill vetoed by the governor benefited antique and classic vehicle owners whose cars are worth more than $5,000. However, it would have penalized most antique and classic vehicle owners whose cars are worth less than $5,000. The legislature chose not to call an additional vote on the bill in an attempt to override the veto.

Wisconsin
Motor Vehicle Registration Rights:

Legislation that originally sought to provide legal registration to hobby vehicles with clear titles, required safety equipment and in good working order was signed into law by Governor Scott Walker. Due to opposition from the Wisconsin Department of Transportation, the bill was amended to now affect only former military vehicles. Several pro-hobby provisions of the bill with application to all hobby vehicles were eliminated. While the amended bill does not solve the many problems associated with registering a hobby car in Wisconsin, it still gained SEMA’s support since it improves the rules governing former military vehicles.

FEDERAL UPDATE

Small Public Companies:

President Obama signed into law a bipartisan bill designed to remove regulatory barriers for companies going public and seeking to attract investors. The SEMA-supported “Jumpstart Our Business Startups” Act makes it easier for small companies to comply with Securities and Exchange Commission (SEC) rules when securing outside capital investment. Companies will be able to file initial public offerings more quickly as regulations will be phased in over a period of five years. The legislation raises the threshold number of shareholders triggering SEC registration from 500 to 2,000 and increases the offering threshold from $5 million to $50 million in shares. Companies can raise capital using the Internet and social media so long as the website is registered with the SEC and investors are informed about a company’s financial condition and shareholder risks. Individual investments are limited to 5% of annual income for those earning under $100,000 a year and 10% for those earning above that amount. Companies with gross annual revenues of up to $1 billion can sell shares to the public while being exempted from some of the requirements of the Sarbanes-Oxley Act.

Certain Steel Wheels from China:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The U.S. International Trade Administration has issued final duty rates for certain steel wheels from China that are being sold at less than fair value in the United States. The subject wheels range from 18 to 24.5 inches in diameter and include rims and discs whether imported as an assembly or separately. The wheels are typically used in commercial vehicles (trucks, buses, trailers, etc.), but duty rates also apply to passenger car wheels within that size range. Calculations for the final dumping margins range from 44.96% to 193.54% ad valorem, and countervailing duties range from 25.66% to 38.32% ad valorem. The duties are on hold until the U.S. International Trade Commission confirms that the dumping and unfair subsidies are causing harm to U.S. industry.

Highway Bill:

The U.S. Senate passed its version of legislation to fund highway construction and other transportation projects over the next two years. SEMA supports the bill’s maintenance of current funding levels in order to address the nation’s aging infrastructure and provide states with more spending flexibility. The legislation also would dramatically increase fines for vehicle or equipment recalls and include mandates to address distracted driving, unintended acceleration and pedal placement and require installation of event data recorders. SEMA contends that current civil penalties are already higher than those imposed on manufacturers for many other types of consumer products, and the National Highway Traffic Safety Administration is already addressing the other issues. The legislation has been sent to the House of Representatives, which is attempting to draft its own bill for a five-year plan. The draft bill currently does not include the auto safety provisions. The government’s authority to fund highway programs expires on June 30.

Ethanol Fuel:

  Aftermarket Parts Regulation, Aftermarket Parts Laws, Federal Regulation Aftermarket Parts, Offroad Industry Legislation
   
The EPA has begun approving applications by fuel producers to blend gasoline with 15% ethanol (E15). However, there are several other regulatory hurdles to be met before the fuel can be offered for sale. Gas stations will not be required to sell the fuel, and the federal government and most states have not yet enacted laws to shield the industry (gas stations, fuel producers, automakers, auto parts manufacturers, etc.) from lawsuits by consumers who allege that E15 caused mechanical breakdowns. Ethanol increases water formation in the gas tank, which can then produce formic acid and corrode certain metal, plastic and rubber parts. Last year, the EPA approved the sale of E15 for model-year 2001 and later vehicles. The EPA agreed with SEMA’s concerns that ethanol poses a threat to older vehicles and made it “illegal” to fuel pre-2001 vehicles with E15. A court is expected to rule this summer on a lawsuit challenging the EPA waivers. SEMA is working with a diverse coalition of other associations to oppose the introduction of E15.

Forest Service Planning Rule:

The U.S. Forest Service updated its “Planning Rule,” which provides guidance and directives for managing the country’s 155 national forests and 20 grasslands encompassing 193 million acres. The courts have rejected previous versions of the Planning Rule in recent years. SEMA joined with a number of other organizations representing the off-road community in opposing the latest version on grounds that it does not adequately protect access for motorized recreation and will be a source of ongoing litigation. Lawmakers attending a recent U.S. House Natural Resources Subcommittee hearing expressed similar concerns, noting that the rule incorporates a number of undefined terms and does not ensure a “full mix of recreational opportunities.” The issue is of importance to SEMA-member companies that market products to the off-road community based on the consumers’ ability to have access to Forest Service roads and trails. Forest managers will now begin applying the rule’s guidelines as they gradually update management rules for each individual forest and grassland.

Fri, 06/01/2012 - 09:38

SEMA News—June 2012

SEMA SPY PHOTOS

Photos Copyright Brenda Priddy & Company. Reuse or reproduction without the copyright holder’s consent is prohibited.

automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima    automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima 
automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima    automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima 

Volkswagen XL1

When It Hits: According to VW, the XL1 will be capable of achieving a combined fuel consumption of approximately 1 liter (.26 gallons) per 62 miles—or 235 mpg—when it hits the road in 2013.

What Priddy Says: The XL1 was the third iteration of the Volkswagen 1L car, first shown in concept guise at the 2011 Qatar Motor Show. The XL1 uses a two-cylinder turbodiesel and an electric motor that pitches to work in parallel with the diesel or drives the car independent of it.

 

Chevrolet Spark

When It Hits: The best guess for an on-sale date is early 2013, with a model-year designation of 2014.

What Priddy Says: The ultra-clean Spark seen here has a new front fascia, which includes a new grille and freshened fog lamps, and it sports a charging port in front of the driver’s door.

     
automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima   automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima 
automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima    automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima

BMW 1-Series

When It Hits: Look for an official introduction later this year.

What Priddy Says: The Priddy team had previously spotted only five-door variants of the next-generation 1-Series in prototype form. But both body styles reveal the 1-Series’ sleeker, more extended look. Expect the powerplants to be similar to those found in the current 135i coupes and cabrio.

 

Audi R8

When It Hits: The Audi R8 makes its official debut at the Paris Motor Show later this year.

What Priddy Says: The exterior modifications will be limited to new LED headlights, a slightly revised grille and new taillights, with different positions of the LEDs. The R8 will continue to be powered by the V8 and V10 engines; however, a direct shift gearbox (DSG) will replace the sequential gearbox.

 

Fri, 06/01/2012 - 09:38

SEMA News—June 2012

SEMA SPY PHOTOS

Photos Copyright Brenda Priddy & Company. Reuse or reproduction without the copyright holder’s consent is prohibited.

automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima    automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima 
automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima    automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima 

Volkswagen XL1

When It Hits: According to VW, the XL1 will be capable of achieving a combined fuel consumption of approximately 1 liter (.26 gallons) per 62 miles—or 235 mpg—when it hits the road in 2013.

What Priddy Says: The XL1 was the third iteration of the Volkswagen 1L car, first shown in concept guise at the 2011 Qatar Motor Show. The XL1 uses a two-cylinder turbodiesel and an electric motor that pitches to work in parallel with the diesel or drives the car independent of it.

 

Chevrolet Spark

When It Hits: The best guess for an on-sale date is early 2013, with a model-year designation of 2014.

What Priddy Says: The ultra-clean Spark seen here has a new front fascia, which includes a new grille and freshened fog lamps, and it sports a charging port in front of the driver’s door.

     
automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima   automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima 
automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima    automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima

BMW 1-Series

When It Hits: Look for an official introduction later this year.

What Priddy Says: The Priddy team had previously spotted only five-door variants of the next-generation 1-Series in prototype form. But both body styles reveal the 1-Series’ sleeker, more extended look. Expect the powerplants to be similar to those found in the current 135i coupes and cabrio.

 

Audi R8

When It Hits: The Audi R8 makes its official debut at the Paris Motor Show later this year.

What Priddy Says: The exterior modifications will be limited to new LED headlights, a slightly revised grille and new taillights, with different positions of the LEDs. The R8 will continue to be powered by the V8 and V10 engines; however, a direct shift gearbox (DSG) will replace the sequential gearbox.

 

Fri, 06/01/2012 - 09:38

SEMA News—June 2012

SEMA SPY PHOTOS

Photos Copyright Brenda Priddy & Company. Reuse or reproduction without the copyright holder’s consent is prohibited.

automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima    automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima 
automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima    automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima 

Volkswagen XL1

When It Hits: According to VW, the XL1 will be capable of achieving a combined fuel consumption of approximately 1 liter (.26 gallons) per 62 miles—or 235 mpg—when it hits the road in 2013.

What Priddy Says: The XL1 was the third iteration of the Volkswagen 1L car, first shown in concept guise at the 2011 Qatar Motor Show. The XL1 uses a two-cylinder turbodiesel and an electric motor that pitches to work in parallel with the diesel or drives the car independent of it.

 

Chevrolet Spark

When It Hits: The best guess for an on-sale date is early 2013, with a model-year designation of 2014.

What Priddy Says: The ultra-clean Spark seen here has a new front fascia, which includes a new grille and freshened fog lamps, and it sports a charging port in front of the driver’s door.

     
automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima   automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima 
automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima    automotive industry, automotive industry news, automotive news, MINI Cooper S, Nissan Pathfinder, BMW i8, Nissan Altima

BMW 1-Series

When It Hits: Look for an official introduction later this year.

What Priddy Says: The Priddy team had previously spotted only five-door variants of the next-generation 1-Series in prototype form. But both body styles reveal the 1-Series’ sleeker, more extended look. Expect the powerplants to be similar to those found in the current 135i coupes and cabrio.

 

Audi R8

When It Hits: The Audi R8 makes its official debut at the Paris Motor Show later this year.

What Priddy Says: The exterior modifications will be limited to new LED headlights, a slightly revised grille and new taillights, with different positions of the LEDs. The R8 will continue to be powered by the V8 and V10 engines; however, a direct shift gearbox (DSG) will replace the sequential gearbox.

 

Fri, 06/01/2012 - 09:01

SEMA News—June 2012

 
   
Product and Catalog Showcase

Interested in placing an ad in the SEMA News Product and Catalog Showcase? Please contact Motor Media:

ADVERTISING
Motor Media Inc.
Joe Sebergandio

P. 818/248-4449, F. 818/248-4249
e-mail: joe@motormediainc.com

For questions regarding ad specs:
Advertising Coordinator
David Block
e-mail: davidb@sema.org

For more pricing information or to download a copy of the current SEMA News rate card, visit www.semanews.com

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New ProductsAtech Motorsports

Get all of your high performance, race, truck, off road, street rod, circle track, restoration, marine, and stock replacement parts needs fulfilled at Atech Motorsports. Atech is constantly adding new lines and parts to its huge in-stock inventory, all at the lowest prices and all backed by a Beat-a-Price guarantee, free shipping, expert advice, and the best customer service. Call Atech Motorsports at 1-800-517-1040 or visit us online and get—the Parts you need! Prices you want! Service you deserve!®

Atech Motorsports
1234 Southeast Ave, Tallmadge, OH 44278
1-330-630-0888
1-800-517-1040
Fax: 1-330-630-5365
www.AtechMotorsports.com

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New ProductsDesign Engineering Inc. (DEI)

Get the scoop on all the latest products from DEI –a leading supplier of performance thermal tuning products.

This detailed catalog provides product descriptions, part numbers, color images, application information and more with 100 new products highlighted.

In addition to DEI thermal products, find what you need on Radiator Relief® coolant additives, CryO2™ cryogenic intake systems, Ny-Trex nitrous systems, Boom Mat thermal acoustic control products, and SPA Turbo USA components. Visit www.designenginerring.com, or call 800-264-9472.

www.designenginerring.com

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Big Worm Graphix

Big Worm Graphix now has lens protection & light tint kits for the new Camaro ZL-1. The product is available in clear or 4 different shades of tint. The 12 mil thick material protects lights from rock damage & yellowing. It installs easy with an adhesive backing and conforms to the curve of the lights. In addition to the ZL-1, we also have pre-cut kits available for all 1999 thru 2013 Mustangs, 2008 & newer Challengers and all 2010 & newer Camaros. Learn more at:

www.bigwormgraphix.com  

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Dick Cepek Tires & Wheels

Dick Cepek’s 2012 catalog features all of their great products including the Radial F-C II, Mud Country, and the aggressive Crusher radial that has a unique broken bone tread design with skull and cross bone Sidebiters®. The new catalog has all the details on Dick Cepek’s DC2, Torque, and GunMetal 7 wheels as well as apparel and point of sale materials.

Dick Cepek Tires & Wheels Toll Free 800-222-9092
P. 330-928-9092
F. 330-928-0503
www.dickcepek.com  

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Bushwacker

We’ve built a reputation as the original, leading manufacturer of fender flares and truck accessories on 45 years of design, worldwide distribution and the largest selection of applications available.

A Limited Lifetime Warranty backs all Bushwacker products which are made here in the U.S. and are supported with outstanding Customer Care. Our consumer approach to easy installation, our dedication to offer the highest quality products and our unmistakable style set us apart.

Contact: Randy Peterson, Regional Sales Manager
503-283-4335 or 800-234-8920
customercare@bushwacker.com
www.bushwacker.com  

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

DU-HA TOTE

This brand new, portable storage unit is designed to hold your gear, ammo, up to 4 rifles or shotguns with scopes, plus more, securely in the back of most SUV’s and pickup trucks. The Tote is constructed from heavy duty polyethylene, has 3 lockable latches, includes organizers/gun rack, utility trays, and a lifetime warranty. Sealed lid helps keep out moisture and dust. For more information, visit us at www.du-ha.com/tote.html or call 1-866-306-3842.

www.du-ha.com/tote.html  

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

GEMA

Gema is a pioneer in powder coating equipment technology, offering customers the confidence and expertise that comes with being the industry’s world leader. Gema equipment is durable, flexible and engineered to last, providing increased performance, greater efficiency, and a better return on investment. Product offerings include manual & automatic spray guns and booths, fast color change equipment, cartridge & cyclone recovery systems, gun movers, control systems and other ancillary equipment. Visit www.gemapowdercoating.com or call 800-628-0601 for more.

www.gemapowdercoating.com  

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

IPF Tuning

IPF Tuning has designed the first supercharger kit for the entire 2010+ Camaro V6 lineup, including the LLT motor and recently released 2012 LFX motor.

This CAD designed kit, features a Vortech V3 supercharger and front mount intercooler and will add up to 120 additional hp and almost 90 lb/ft. of torque while maintaining the fuel efficiency of the V6. Developed as a non-impact installation and canbe paired with an optional supplemental powertrain warranty. For more
information: 888-222-4291 or
www.IPF-Tuning.com

www.IPF-Tuning.com  

 

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Gibson Performance Exhaust

Gibson Performance Exhaust, Corona, CA has teamed up with Motocross legend, founder of Metal Mulisha, 2010 Lucas Oil Driver of the Year, and one of the most decorated action sport athletes “The General” Brian Deegan . Working closely with Brian Deegan Gibson Performance now offers a full product line of bolt on Exhaust tips offered in High quality Flat Black Ceramic Coated finish, featuring the stainless steel Metal Mulisha Skull. These large tips can be found in sizes including 8”, 6” and 5” diameters.

1-800-528-3044
Gibsonperformance1@gibsonperformance.com
www.Gibsonperformance.com  

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

McGard

McGard has been protecting the world’s finest wheels and tires from theft since 1964. Our wheel locks provide the highest level of protection against costly wheel and tire theft. Our lug nuts are built to last a lifetime. They are guaranteed not to rust, chip or peel. Our consistent high-quality insures the greatest value for our customer and is evident in every McGard product on the market today. Visit us at shop.mcgard.com or call 800-669-6887.

www.shop.mcgard.com

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Intro-Tech Automotive

Our newest add-on to our award winning Pitstop Furniture-line is the GT-Receiver chair, this “stationary” chair (available in 3 color combinations) is meant to be used in front of your desk, home office or in the lobby/reception area of your store. Height adjustable armrest and a reclining backrest will make this the most comfortable racing receiving chair ever!

•Suspension Spring and Brake Caliper Kit
•26" Wide Track Aluminum Alloy Base
•Five 22" Style Racing Wheels
• Office Chair Weight: 55 lbs.
•Designed and Assembled in the USA
•Carries Intro-Tech Automotive, Inc., Lifetime Warranty
•Patented World-Wide
866-319-8500
www.intro-techautomotive.com  

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

McGard

The New Tailgate Lock from McGard

Designed for people who use their truck bed. The McGard Tailgate Lock offers easy installation for around the clock tailgate theft protection requiring no modifications to truck or tailgate. No keys or handle covers are required to lock and unlock, once installed onto the hinge, it never needs to be removed to open or close the tailgate. One part number fits most current full-size and some small & mid-size trucks. Contact McGard for more info 800-669-6887 or shop online at shop.mcgard.com.

www.shop.mcgard.com 

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Mickey Thompson Performance Tires & Wheels

Mickey Thompson’s new 2012 catalog features the entire line of Mickey Thompson Tires & Wheels for hot rodders, drag racers, truck and off-road enthusiasts. Get detailed specifications for all products, Mickey Thompson apparel and point-of-sale displays and materials.

A must-have catalog for all chassis builders, speed shops, restylers, and off-road shops.

Mickey Thompson
Performance Tires & Wheels
Toll Free 800-222-9092
P. 330-928-9092
F. 330-928-0503
www.mickeythompsontires.com  

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

ProRYDE Suspension Systems

2012 PRODUCT PREVIEW!

LIFT IT. LEVEL IT. TUNE IT. Our SEMA award-winning products are the NEW generation of LIFT & LEVELING products.

Every ProRYDE kit is ADJUSTABLE, so you get exactly the ride height result you want, every time. Dial-in your perfect ride height!

ProRYDE…EXACTLY THE WAY YOU WANT IT.

1-888-813-RYDE (7933)
www.proryde.com

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Mid America Motorworks

From C1 show car to C6 daily driver and every generation in between, Mid America Motorworks carries the largest inventory of Corvette parts, performance and accessories. Our FREE, full-color Corvette catalog features 300+ pages of restoration, maintenance, interiors and performance parts, plus car care products, fun clothing and lifestyle accessories – everything you need to fuel your passion, no matter the generation. Call 866-521-9929 or shop corvette.mamotorworks.com. Mention Code SE12

www.corvette.mamotorworks.com   

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Pro-Werks

Remote fluid filling is made easy with the Recessed Remote Easy Turn Fill Assembly. This unit provides super sanitary installation for a filling point in a panel or trunk; with an integral hose barb enabling connection to the tank. Each assembly is fitted with a signature Pro-Werks Easy Turn Fill Cap, which comes in a variety of colors. On top of looking good; benefits include positive grip finger notches, quick starting coarse threads and a positive sealing radial squeeze o-ring. Precision CNC machined from billet aluminum, right here in the USA.

Visit www.Pro-Werks.com, or call 231-873-9252, for dealer near you.

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Prestige Autotech Corp

Ballistic wheels are developed to offer affordable wheels with high end design and cutting edge styling. The Havoc is available in 15”, 16”, 17”, 18”, 20” and 22” for SUV’s and trucks in a flat black machined finish. Ballistic keeps you in high style while being mindful of a budget.

www.ballisticoffroad.com  
www.facebook.com/ballistic  
909-627-6411

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Snow Performance

Snow Performance has released a new catalog featuring it’s latest Boost Cooler® water-methanol injection systems and upgrades. Both Diesel and Gasoline applications are included as well as the new SEMA Award winning application specific designs.

Don’t guess, use this to get the best system for you or your customer’s vehicle. For more information call
866-365-2762. www.snowperformance.net  

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New ProductsSpeedway Motors

Speedway Motors – the name says it all! Speedway is celebrating 60 years of speed with a huge new catalog bursting with unique, high-quality parts for street rods, muscle cars, vintage trucks and classic cars. See a vast selection of newly designed suspension components, bolt-on disc brake kits, exhaust products, fasteners, fittings, radiators, electrical equipment and specialty tools, plus a huge variety of engine parts for everything from Flathead Ford V8s to modern LS-Series engines.

Call 800-979-0122 or shop
SpeedwayMotors.com.
www.SpeedwayMotors.com

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Swisstrax

Swisstrax modular flooring offers a practical and modern alternative to concrete and epoxy floors. Swisstrax is at the forefront of innovation – bringing to market the first ever LED LIGHT MATS for workshops, garages, hangars and events.

Swisstrax is also “turning tires into tiles” with its eco-friendly line of injection molded modular tiles made with 100% recycled materials including recycled tires.

Visit us online at www.Swisstrax.com or call us at 866-748-7940.

 

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Steamericas

The Optima Steamer generates powerful yet safe steam to wash and clean various surfaces effectively. While requiring less water than a standard pressure washer, it eliminates the need for chemicals as steam’s pressure and temperature can remove dirt, mud, grease, tree sap, bird droppings, bug spots and more very effectively! Clean a car inside out by only using 1 gallon of water. The Optima Steamer is GREEN. Visit www.steamericas.com for more information.

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Trick Flow Specialties

Trick Flow Specialties was born out of the need for premium-quality, high performance engine products capable of delivering maximum power at affordable prices. Stock the best designed, best performing engine components available and increase your profits—you owe it to your business to see the difference Trick Flow’s advanced engineering, R&D, and manufacturing makes. Call Trick Flow Specialties at 1-888-841-6556 or go online at www.TrickFlow.com today and see what Ultimate Bolt-On Performance!™ is all about.

Phone: 330-630-1555 
Toll Free 1-888-841-6556

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Steele Rubber Products

Quality Crafted Rubber Parts & Weatherstripping

592 pages of quality rubber seals and weatherstripping for American-made cars, trucks and street rods. Thousands of parts to help restore the car of your dreams. Lifetime parts guarantee.

“Get your Free Catalog at www.steelerubber.com or 800-447-0849.”

Steele Rubber Products www.steelrubber.com 
800-544-8665

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Watson’s StreetWorks

Illuminated Oval Billet 5-Wire Power Window Kits with Grooved Switches

Get your groove thing back with Watson’s new design of power window switches. They added grooves to the switch for looks and tactile ease during operation and more lighting holes for illumination to shine through on these 5-wire rocker switches. The single oval frame measures 2-11/16” x 1-15/16” , the double is 3-1/8” x 2-1/4” . Frames mount with blind studs. Kits come complete with wire hook ups and installation instructions. Also available in rectangular frames.

Watson’s StreetWorks
P.O. Box 270
Bozrah, CT 06334
860-859-0513
www.watsons-streetworks.com  

Fri, 06/01/2012 - 09:01

SEMA News—June 2012

 
   
Product and Catalog Showcase

Interested in placing an ad in the SEMA News Product and Catalog Showcase? Please contact Motor Media:

ADVERTISING
Motor Media Inc.
Joe Sebergandio

P. 818/248-4449, F. 818/248-4249
e-mail: joe@motormediainc.com

For questions regarding ad specs:
Advertising Coordinator
David Block
e-mail: davidb@sema.org

For more pricing information or to download a copy of the current SEMA News rate card, visit www.semanews.com

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New ProductsAtech Motorsports

Get all of your high performance, race, truck, off road, street rod, circle track, restoration, marine, and stock replacement parts needs fulfilled at Atech Motorsports. Atech is constantly adding new lines and parts to its huge in-stock inventory, all at the lowest prices and all backed by a Beat-a-Price guarantee, free shipping, expert advice, and the best customer service. Call Atech Motorsports at 1-800-517-1040 or visit us online and get—the Parts you need! Prices you want! Service you deserve!®

Atech Motorsports
1234 Southeast Ave, Tallmadge, OH 44278
1-330-630-0888
1-800-517-1040
Fax: 1-330-630-5365
www.AtechMotorsports.com

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New ProductsDesign Engineering Inc. (DEI)

Get the scoop on all the latest products from DEI –a leading supplier of performance thermal tuning products.

This detailed catalog provides product descriptions, part numbers, color images, application information and more with 100 new products highlighted.

In addition to DEI thermal products, find what you need on Radiator Relief® coolant additives, CryO2™ cryogenic intake systems, Ny-Trex nitrous systems, Boom Mat thermal acoustic control products, and SPA Turbo USA components. Visit www.designenginerring.com, or call 800-264-9472.

www.designenginerring.com

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Big Worm Graphix

Big Worm Graphix now has lens protection & light tint kits for the new Camaro ZL-1. The product is available in clear or 4 different shades of tint. The 12 mil thick material protects lights from rock damage & yellowing. It installs easy with an adhesive backing and conforms to the curve of the lights. In addition to the ZL-1, we also have pre-cut kits available for all 1999 thru 2013 Mustangs, 2008 & newer Challengers and all 2010 & newer Camaros. Learn more at:

www.bigwormgraphix.com  

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Dick Cepek Tires & Wheels

Dick Cepek’s 2012 catalog features all of their great products including the Radial F-C II, Mud Country, and the aggressive Crusher radial that has a unique broken bone tread design with skull and cross bone Sidebiters®. The new catalog has all the details on Dick Cepek’s DC2, Torque, and GunMetal 7 wheels as well as apparel and point of sale materials.

Dick Cepek Tires & Wheels Toll Free 800-222-9092
P. 330-928-9092
F. 330-928-0503
www.dickcepek.com  

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Bushwacker

We’ve built a reputation as the original, leading manufacturer of fender flares and truck accessories on 45 years of design, worldwide distribution and the largest selection of applications available.

A Limited Lifetime Warranty backs all Bushwacker products which are made here in the U.S. and are supported with outstanding Customer Care. Our consumer approach to easy installation, our dedication to offer the highest quality products and our unmistakable style set us apart.

Contact: Randy Peterson, Regional Sales Manager
503-283-4335 or 800-234-8920
customercare@bushwacker.com
www.bushwacker.com  

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

DU-HA TOTE

This brand new, portable storage unit is designed to hold your gear, ammo, up to 4 rifles or shotguns with scopes, plus more, securely in the back of most SUV’s and pickup trucks. The Tote is constructed from heavy duty polyethylene, has 3 lockable latches, includes organizers/gun rack, utility trays, and a lifetime warranty. Sealed lid helps keep out moisture and dust. For more information, visit us at www.du-ha.com/tote.html or call 1-866-306-3842.

www.du-ha.com/tote.html  

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

GEMA

Gema is a pioneer in powder coating equipment technology, offering customers the confidence and expertise that comes with being the industry’s world leader. Gema equipment is durable, flexible and engineered to last, providing increased performance, greater efficiency, and a better return on investment. Product offerings include manual & automatic spray guns and booths, fast color change equipment, cartridge & cyclone recovery systems, gun movers, control systems and other ancillary equipment. Visit www.gemapowdercoating.com or call 800-628-0601 for more.

www.gemapowdercoating.com  

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

IPF Tuning

IPF Tuning has designed the first supercharger kit for the entire 2010+ Camaro V6 lineup, including the LLT motor and recently released 2012 LFX motor.

This CAD designed kit, features a Vortech V3 supercharger and front mount intercooler and will add up to 120 additional hp and almost 90 lb/ft. of torque while maintaining the fuel efficiency of the V6. Developed as a non-impact installation and canbe paired with an optional supplemental powertrain warranty. For more
information: 888-222-4291 or
www.IPF-Tuning.com

www.IPF-Tuning.com  

 

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Gibson Performance Exhaust

Gibson Performance Exhaust, Corona, CA has teamed up with Motocross legend, founder of Metal Mulisha, 2010 Lucas Oil Driver of the Year, and one of the most decorated action sport athletes “The General” Brian Deegan . Working closely with Brian Deegan Gibson Performance now offers a full product line of bolt on Exhaust tips offered in High quality Flat Black Ceramic Coated finish, featuring the stainless steel Metal Mulisha Skull. These large tips can be found in sizes including 8”, 6” and 5” diameters.

1-800-528-3044
Gibsonperformance1@gibsonperformance.com
www.Gibsonperformance.com  

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

McGard

McGard has been protecting the world’s finest wheels and tires from theft since 1964. Our wheel locks provide the highest level of protection against costly wheel and tire theft. Our lug nuts are built to last a lifetime. They are guaranteed not to rust, chip or peel. Our consistent high-quality insures the greatest value for our customer and is evident in every McGard product on the market today. Visit us at shop.mcgard.com or call 800-669-6887.

www.shop.mcgard.com

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Intro-Tech Automotive

Our newest add-on to our award winning Pitstop Furniture-line is the GT-Receiver chair, this “stationary” chair (available in 3 color combinations) is meant to be used in front of your desk, home office or in the lobby/reception area of your store. Height adjustable armrest and a reclining backrest will make this the most comfortable racing receiving chair ever!

•Suspension Spring and Brake Caliper Kit
•26" Wide Track Aluminum Alloy Base
•Five 22" Style Racing Wheels
• Office Chair Weight: 55 lbs.
•Designed and Assembled in the USA
•Carries Intro-Tech Automotive, Inc., Lifetime Warranty
•Patented World-Wide
866-319-8500
www.intro-techautomotive.com  

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

McGard

The New Tailgate Lock from McGard

Designed for people who use their truck bed. The McGard Tailgate Lock offers easy installation for around the clock tailgate theft protection requiring no modifications to truck or tailgate. No keys or handle covers are required to lock and unlock, once installed onto the hinge, it never needs to be removed to open or close the tailgate. One part number fits most current full-size and some small & mid-size trucks. Contact McGard for more info 800-669-6887 or shop online at shop.mcgard.com.

www.shop.mcgard.com 

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Mickey Thompson Performance Tires & Wheels

Mickey Thompson’s new 2012 catalog features the entire line of Mickey Thompson Tires & Wheels for hot rodders, drag racers, truck and off-road enthusiasts. Get detailed specifications for all products, Mickey Thompson apparel and point-of-sale displays and materials.

A must-have catalog for all chassis builders, speed shops, restylers, and off-road shops.

Mickey Thompson
Performance Tires & Wheels
Toll Free 800-222-9092
P. 330-928-9092
F. 330-928-0503
www.mickeythompsontires.com  

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

ProRYDE Suspension Systems

2012 PRODUCT PREVIEW!

LIFT IT. LEVEL IT. TUNE IT. Our SEMA award-winning products are the NEW generation of LIFT & LEVELING products.

Every ProRYDE kit is ADJUSTABLE, so you get exactly the ride height result you want, every time. Dial-in your perfect ride height!

ProRYDE…EXACTLY THE WAY YOU WANT IT.

1-888-813-RYDE (7933)
www.proryde.com

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Mid America Motorworks

From C1 show car to C6 daily driver and every generation in between, Mid America Motorworks carries the largest inventory of Corvette parts, performance and accessories. Our FREE, full-color Corvette catalog features 300+ pages of restoration, maintenance, interiors and performance parts, plus car care products, fun clothing and lifestyle accessories – everything you need to fuel your passion, no matter the generation. Call 866-521-9929 or shop corvette.mamotorworks.com. Mention Code SE12

www.corvette.mamotorworks.com   

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Pro-Werks

Remote fluid filling is made easy with the Recessed Remote Easy Turn Fill Assembly. This unit provides super sanitary installation for a filling point in a panel or trunk; with an integral hose barb enabling connection to the tank. Each assembly is fitted with a signature Pro-Werks Easy Turn Fill Cap, which comes in a variety of colors. On top of looking good; benefits include positive grip finger notches, quick starting coarse threads and a positive sealing radial squeeze o-ring. Precision CNC machined from billet aluminum, right here in the USA.

Visit www.Pro-Werks.com, or call 231-873-9252, for dealer near you.

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Prestige Autotech Corp

Ballistic wheels are developed to offer affordable wheels with high end design and cutting edge styling. The Havoc is available in 15”, 16”, 17”, 18”, 20” and 22” for SUV’s and trucks in a flat black machined finish. Ballistic keeps you in high style while being mindful of a budget.

www.ballisticoffroad.com  
www.facebook.com/ballistic  
909-627-6411

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Snow Performance

Snow Performance has released a new catalog featuring it’s latest Boost Cooler® water-methanol injection systems and upgrades. Both Diesel and Gasoline applications are included as well as the new SEMA Award winning application specific designs.

Don’t guess, use this to get the best system for you or your customer’s vehicle. For more information call
866-365-2762. www.snowperformance.net  

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New ProductsSpeedway Motors

Speedway Motors – the name says it all! Speedway is celebrating 60 years of speed with a huge new catalog bursting with unique, high-quality parts for street rods, muscle cars, vintage trucks and classic cars. See a vast selection of newly designed suspension components, bolt-on disc brake kits, exhaust products, fasteners, fittings, radiators, electrical equipment and specialty tools, plus a huge variety of engine parts for everything from Flathead Ford V8s to modern LS-Series engines.

Call 800-979-0122 or shop
SpeedwayMotors.com.
www.SpeedwayMotors.com

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Swisstrax

Swisstrax modular flooring offers a practical and modern alternative to concrete and epoxy floors. Swisstrax is at the forefront of innovation – bringing to market the first ever LED LIGHT MATS for workshops, garages, hangars and events.

Swisstrax is also “turning tires into tiles” with its eco-friendly line of injection molded modular tiles made with 100% recycled materials including recycled tires.

Visit us online at www.Swisstrax.com or call us at 866-748-7940.

 

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Steamericas

The Optima Steamer generates powerful yet safe steam to wash and clean various surfaces effectively. While requiring less water than a standard pressure washer, it eliminates the need for chemicals as steam’s pressure and temperature can remove dirt, mud, grease, tree sap, bird droppings, bug spots and more very effectively! Clean a car inside out by only using 1 gallon of water. The Optima Steamer is GREEN. Visit www.steamericas.com for more information.

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Trick Flow Specialties

Trick Flow Specialties was born out of the need for premium-quality, high performance engine products capable of delivering maximum power at affordable prices. Stock the best designed, best performing engine components available and increase your profits—you owe it to your business to see the difference Trick Flow’s advanced engineering, R&D, and manufacturing makes. Call Trick Flow Specialties at 1-888-841-6556 or go online at www.TrickFlow.com today and see what Ultimate Bolt-On Performance!™ is all about.

Phone: 330-630-1555 
Toll Free 1-888-841-6556

     

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Steele Rubber Products

Quality Crafted Rubber Parts & Weatherstripping

592 pages of quality rubber seals and weatherstripping for American-made cars, trucks and street rods. Thousands of parts to help restore the car of your dreams. Lifetime parts guarantee.

“Get your Free Catalog at www.steelerubber.com or 800-447-0849.”

Steele Rubber Products www.steelrubber.com 
800-544-8665

 

Aftermarket Business, Automotive Business, Off Road Business, Powersports Business, Tire Industry, New Products

Watson’s StreetWorks

Illuminated Oval Billet 5-Wire Power Window Kits with Grooved Switches

Get your groove thing back with Watson’s new design of power window switches. They added grooves to the switch for looks and tactile ease during operation and more lighting holes for illumination to shine through on these 5-wire rocker switches. The single oval frame measures 2-11/16” x 1-15/16” , the double is 3-1/8” x 2-1/4” . Frames mount with blind studs. Kits come complete with wire hook ups and installation instructions. Also available in rectangular frames.

Watson’s StreetWorks
P.O. Box 270
Bozrah, CT 06334
860-859-0513
www.watsons-streetworks.com