Products Available for SEMA Show Project-Vehicle Builders
Thu, 08/02/2012 - 09:24
  automobile trade show, auto show, automobile events, sema show
   

SEMA Show Exhibitors: Get your parts on more vehicles at the 2012 SEMA Show by offering products to builders through the Products for Project-Vehicle Builders list. The list is a simple way to connect manufacturers looking for additional product exposure at the SEMA Show with the builders who design and create the vehicles that grab the attention of media and buyers from around the world.

Product-placement opportunities such as these are so beneficial that manufacturers often offer products for free or at a greatly reduced rate. To participate in the list, access the Products for Project-Vehicle Builders form.

The latest addition to the list will be included each week in SEMA eNews, when available. The list is open to exhibitors of the 2012 SEMA Show only and is intended to build awareness for SEMA Show exhibitors and their products.

For questions or additional information, contact Jason Catullo at jasonc@sema.org 909-978-6713.

Latest Products Offered

Engine/Underhood Components

Champion Oil: Racing oil, hot rod oil, diesel performance oil. Contact: Karl Dedolph, kdedolph@championbrands.com, 660-890-6231. Website: www.championsusechampion.com.

Classic Design Concepts: The 2013 Mustang GT Shaker cold air induction unit designed for maximum appeal with its cast aluminum hood scoop system is now available for SEMA builds. Contact: Jake Lane, jl@classicdesignconcepts.com, 866-624-7997. Website: www.classicdesignconcepts.com.

Exterior Components/Accessories

Advantage Truck Accessories: Folding soft vinyl tonneau cover, folding hard tonneau cover, windshield cover. Contact: Jeff Fink, jfink@advantagetruckaccessories.com, 574-293-0979. Website: www.atacovers.com.

Classic Design Concepts: We offer a variety of OE quality restyling components for 2013 Mustang V6 and GT models, such as the performance grille, rear fascia vents, decklid trim panel, and Coyote side badges. Contact: Jake Lane, jl@classicdesignconcepts.com, 866-624-7997. Website: www.classicdesignconcepts.com.

Golight Inc.: Portable and permanent mount remote control searchlights. Fixed-mount LED work lights/off road lighting. Contact: Shawna Matson, shawna@golight.com, 308-278-3131.

Lazer Star Lighting Products: Six-inch to 50-inch, 10-watt LED light bars and three-watt LED light bars. HID lights, bumper lights, roof lights, auxiliary lights for Jeeps/Trucks/UTVs or any automotive application. Contact: Suzi Cusimano, suzi@lazerstar.net, 805-226-8200. Website: www.lazerstar.net.

Retro Rack: Billet adjustable power steering system. Greg Lovell, glovell@gmail.com, 805-254-4835. Website: www.retrorack.com.au.

Rigid Industries: Exterior auxiliary LED lights, forward projecting. Discounted or comped on a case-by-case basis. Contact: Taylor Anderson, twa@rigidindustries.com, 480-655-0100. Website: www.rigidindustries.com. 

Previous Submissions

Engine/Underhood Components

Advanced Clutch Technology Inc. (ACT): Clutches and flywheels. Contact: Daniel Starksen, 661-940-7555, daniels@advancedclutch.com. Website: www.advancedclutch.com.

AEM Induction Systems: Full line of high-performance air intake systems and air filters for sport compact, modern-day musclecars and trucks and SUVs, including gas and diesel applications. Contact: Lucio Tapia, 800-992-3000, luciot@aemintakes.com.

AIRAID Filter Co.: New cold air intake systems for the 2013 Scion FR-S and Subaru BRZ! Unlimited supply available! Contact: Brian Paravicini, brian@airaid.com, 602-652-9724. Website: www.airaid.com.

American Truck Technology: Exotic "Big Mouth" stainless steel exhaust tips for light-duty trucks with non-traditional profiles featuring triangles, tear drops and ovals. Contact: Jeff Liu, 855-288-8782, jeff.liu@americantrucktechnology.com. Website: www.americantrucktechnology.com.

AMSOIL Inc.: Synthetic motor oil & drivetrain fluids. Contact: Ed Newman or Jamie Jarvi, info@amsoil.com, 715-399-6557. Website: www.AMSOIL.com.

Champion Oil: Champion produces and blends more than 300 products, including fuel, oil, engine additives and lubricants for the racing, automotive, heavy truck, agricultural, industrial and specialty markets. Contact: Karl Dedolph, 660-890-6231, kdedolph@championbrands.com. Website: www.championsusechampion.com.

CORSA Performance Exhausts: Premium, stainless steel, high-performance exhaust systems for the newest cars and trucks. Contact: Casey Milano, 330-244-9980, casey@mcculloughpr.com. Website: www.corsaperformance.com.

DeatschWerks: Flow-matched fuel-injector sets (up to 2,200cc). Contact: Greg Brungardt, 405-217-0718, Greg@DeatschWerks.com. Website: www.DeatschWerks.com.

Design Engineering Inc.: DEI heat protection, CryO2 cryogenic air charge cooling system, Boom Mat sound deadening materials, Ny-Trex nitrous systems and components and SPA turbo components. Contact: Tom Miller, 440-930-7940, tmiller@designengineering.com. Website: www.designengineering.com.

DevilsOwn Injection: Progressive water methanol injection kit. Contact: Chance McClurkin, 405-470-4356, chance@alcohol-injection.com. Website: www.alcohol-injection.com.

Edge Products/Superchips: Performance tuning and data monitoring products for gas and diesel trucks, cars, SUVs and Jeeps. Products include: Edge Insight CS/CTS, Evolution CS/CTS, Juice with Attitude CS/CTS, EvoHT, Superchips Flashpaq, VIVID Linq, TrailDash, TrailJammer TDX and Cortex. Contact: Jim McGinn, 770-846-0327, jmcginn@powerteq.com. Website: www.edgeproducts.com or www.superchips.com.

Granatelli Motor Sports Inc.: Late-model Ford, Chevy and Dodge ignition coils, cold air intake systems, mass airflow sensors. Contact: J.R. Granatelli, 805-486-6644, jrgranatelli@granatellimotorsports.com. Website: www.granatellimotorsports.com.

Haltech Engine Management Systems: Engine Management systems wire in and PNP including ignition systems and display dashes. Contact: Steve Nichols, Steve@haltech.com, 760-598-1941. Website: www.haltech.com.

K&N Engineering Inc.: High-flow intake systems, OE replacement air filters, high-performance oil filters for most vehicles and powersports applications. Contact: Lucio Tapia, 951-826-4000, ext. 4350, luciot@knfilters.com. Website: www.knfilters.com.

Maradyne High Performance Fans: High-performance cooling fans, including the dual 12-in. Jetstreme Platinum fan, plus a variety of heaters and accessories. Contact: Casey Milano, 330-244-9980, casey@mcculloughpr.com. Website: www.maradynehp.com.

ProCharger: Intercooled ProCharger supercharger systems. Cary Pangrac, 913-338-2886, cary.pangrac@procharger.com. Website: www.procharger.com.

Odyssey Battery by EnerSys: High-performance batteries and battery chargers. Contact: April Lowther, april.lowther@enersys.com, 610-208-1729. Website: www.odysseybattery.com.

Quick Time Performance: AR3 stainless steel mufflers. Contact: Barry Adler, 973-513-9955, sales@quicktimeperformance.com.

Road Magnet Performance Springs: Precision mechanical springs. Contact: Mark Habicht, 410-686-9100, mark@roadmagnet.com. Website: www.roadmagnet.com.

S&B Filters Inc.: Cold air intake kits for gas and diesel trucks. Contact: Ryan Herold, rherold@sbfilters.com, 909-232-8920. Website: www.sbfilters.com.

Warrior Products: HoodLift by Warrior Hood strut kits for Jeeps. Contact: Jason Roy, jason@warriorproducts.com, 503-691-8915. Website: www.warriorproducts.com. 

XS Power Batteries: Batteries, chargers, billet hold downs, power cable and other electrical accessories. Contact: Nathan Way, 888-497-7693, nathan@xspowerbatteries.com. Website: www.4XSPower.com.

Exterior Components/Accessories

American Force Wheels: five-lug, six-lug, eight-lug, 10-lug dually and SRW truck wheels. Contact: Deyan Font, 800-620-6259, deyan@americanforcewheels.com. Website: www.americanforcewheels.com.

American Truck Technology: Exotic chrome accessories for large 22.5-in. wheels and dramatic "Big Mouth" stainless steel exhaust tips with non-traditional profiles, featuring triangles, tear drops and ovals. Contact: Jeff Liu, 855-288-8782, jeff.liu@americantrucktechnology.com. Website: www.americantrucktechnology.com.

AnzoUSA: Headlights, taillights, third brake lights, universal lighting and off-road lights. Contact: Shaun Callaway, 909-590-8618, ext. 111, shaun@anzousa.com. Website: www.anzousa.com.

APS Auto Parts Specialist Inc.: Aluminum billet grille, stainless steel wire mesh grille, CNC perimeter grille, EZ wire mesh grille. Contact: Paul Chen, 866-837-1277 ext. 204, paul@apsautoparts.com. Website: www.apsautoparts.com.

A.R.E. Accessories LLC: Fiberglass truck caps and tonneau covers. Contact: Casey Milano, 330-244-9980, casey@mcculloughpr.com. Website: www.4are.com.

Armano-XIX Wheels: 20-in. and 22-in. staggered wheels with stainless-steel chrome lip; 18-in., 20-in., 22-in., 24-in. and 26-in. chromed and painted wheels for SUVs. Contact: Jenny Hindmann, 626-350-9000. Website: www.xixwheels.com.

BASF Refinish: BASF Foose colors, R-M Carizzma (Candy) paint, Glasurit and Limco finishes available. Products include primer, color and clear for selected vehicles. Contact: Brian Fox, 717-577-6449, brian.fox@basfpaintnews.com. Websites: www.basfrefinish.com, www.basfpaintnews.com and www.carizzmacolor.com.

BMF Wheels: BMF Death Metal Black mesh grilles are available for Chevy, Dodge, Ford and Toyota. Contact: Blake Ramthun, 888-313-2580, blake@bmfwheels.com. Website: www.bmfwheels.com.

Ce'zzanne Collection: Custom aluminum alloy wheels, black art (one-piece cast-black painted and machined), Cezzanne Collection (two-piece forged rim-chrome, painted and machined). Contact: Larry Brown, 213-663-6013, larry@envythefuture.com. Website: www.blackartwheels.com or www.cezzannecollection.com.

Convert-A-Ball Distributing: The original Convert-A-Ball interchangeable tow ball system—cushioned ball mounts (both 2-inch and 2-1/2-inch receiver). Contact: Denis Cheatham, info@convert-a-ball.net, 308-254-7115. Website: www.convert-a-ball.net.

Delta Tech Industries LLC: Driving lights, fog lights, headlights and auxiliary lights. Contact: Tom Ameduri, 909-673-1900, tom@deltalights.com. Website: www.deltalights.com.

EGR Inc.: Complete sets of bolt-on style, rugged style and OEM style fender flares. In-channel window visors and hood shields. Also integrated full side steps for CUV applications. Contact: Thomas Hornbake, thornbak@egrusa.com, 909-923-7075. Website: www.egrusa.com.   

Extang/TruXedo/BedRug/UnderCover: Extang Tonneau Covers. Contact: Steve Kelley, 734-434-3516, skelley@extang.com. Also offering the TonneauMate tonneau toolbox. Contact: Joel Mohlenhoff, joel.mohlenhoff@truxedo.com, 651-731-5334. Website: www.extang.com.

Go Rhino! Products/Big Country: New Dominator D4 sidesteps, heavy-duty grille guards, 4-, 5- and 6-in. oval sidebars, hitch steps, bed bars, bed rails and exhaust tips. Contact: Kathryn Reinhardt, 888-427-4466, kathryn@gorhino.com. Website: www.gorhino.com or www.bigcountryauto.com.

Mickey Thompson Performance Tires & Wheels: M/T Metal Series steel wheels with black powder coat available in 15-inch, 16-inch and 17-inch sizes. Available for most popular Jeeps, pickups and 4x4s. Street Comp ultra-high performance tires available for 17- to 20-inch wheel sizes. Classic big rig wheels (20x9 or 20x11) for simulated "big rig" look. Contact: Willy Woo, wwoo@mickeythompsontires.com, 800-222-9092, ext. 3754. Websites: www.mickeythompsontires.com/metal, www.mickeythompsontires.com/street.php?item=StreetComp, www.mickeythompsontires.com/wheels.php?item=ClassicBigRig.

ORACLE Lighting: ORACLE headlight halo kits featuring high-powered SMD rings in a variety of colors to match any theme. Contact: Jonathan Barber or Matthew Alesich, 800-407-5776, jonathan@oraclelights.com. Website: www.oraclelights.com.

Prestige Fender Flares: Pickup fender flares. Contact: Jim Wortham, jimw@prestigefenderflares.com, 888-762-8608.

Ranch Hand Truck Accessories: Heavy-duty grille guards; front bumper replacements; bullnose bumper replacements; back bumpers; headache rack systems; toolboxes; steps for Chevy, Dodge, GMC, Ford, Toyota and Jeep vehicles. Contact: Cherise Ratliff, 361-594-4608, ext. 118, cratliff@ranchhand.com. Website: www.ranchhand.com.

Raptor Series: Three-inch stainless round nerf bars, four-, five- and six-inch stainless/black cab length oval step tubes, four-, five- and six-inch stainless/black wheel-to-wheel oval step tubes, seven-inch stainless steel running boards, stainless truck bedrails. Contact: Mike McGinnis, 877-769-3765, ext. 303, mike@raptorseries.com. Website: www.raptorseries.com.

Retrax Truck Bed Covers: The complete line of Retrax retractable pickup bed covers are available. Contact: Andy Nephew, 701-746-5596, anephew@retrax.com. Website: www.retrax.com.

RK Sport Inc.: Fiberglass and carbon fiber: hoods, trunk spoilers and miscellaneous body parts. Urethane ground effects kit, body kits, bumpers, spoiler and small miscellaneous accessories. Contact: Sean Tito, 951-894-7883, sean@rksprot.com. Website: www.rksport.com.

Shining Monkey Corp.: Car polish, wax, wash, tire dressing, quick detailer, matte paint cleaner/protector and vinyl wrap cleaner/protector. Contact: Shining Monkey, 888-2656-8615, info@shiningmonkeycorp.com. Website: www.shiningmonkeycorp.com.

StreetGlow Inc.: LED lighting. Contact: Jack Panzarella, 973-709-9000, ext. 103, jackp@streetglow.com. Website: www.streetglow.com.

Strike Force Zebra: JK Wrangler half doors. Contact: Bill Ball, 661-310-7829, billb@strikeforcezebra.com. Website: www.strikeforcezebra.com.

Truck Accessories Group-LEER/Century/Raider/Pace Edwards: Includes Leer and Pace Edwards. The member companies are manufacturers of a wide variety of fiberglass, aluminum truck caps, tonneaus and retractable covers for pickups used in the truck cap, fleet and commercial industries. TAG products maximize hauling capacity for work trucks and fleets with versatile products. Contact: Patricia Stewart, 916-771-0196, pstewart@truckgroup.com. Website: www.truckgroup.com/brands.

UASG: Professional application by 3M Certified Graphic Installation Companies for self adhesive vinyl decals, specialty films and wraps on vehicles. Contact: Julie Martin, 888-579-9793, Feedback@uasg.org. Website: www.uasg.org.

Vossen Wheels: Vossen Wheels, 19- to 22-in. Contact: Jav, 305-463-7778, jav@vossenwheels.com. Website: www.vossenwheels.com.

VPR4X4 Bumpers: Custom-built off-road bumpers. Contact: Deyan Font, 888-847-3779, deyan@vpr4x4.com. Website: www.vpr4x4.com.

Warrior Products: Body armor, bumpers, tube flares for Jeep and FJ Cruiser. Contact: Jason Roy, jason@warriorproducts.com, 503-691-8915. Website: www.warriorproducts.com. 

Weld Racing LLC: Weld Racing is featuring 17- and 20-in. wheels for trucks up to 14 in. wide, 17- and 19.5-in. wheels for dually trucks, and 15-, 17-, 18- and 20-in. wheels for high-performance cars up to 17.5 in. wide. Also featured are 16x6 forged trailer wheels that match the truck designs. All are forged aluminum and all are made in the USA. Contact: Gregory Smith, 816-423-5712, gsmith@weldracing.com. Website: www.weldracing.com.

Westin Automotive: Wade sure-fit floor/cargo mats. Contact: Antoinette Belton, abelton@westinautomotive.com, 626-960-6762, ext. 456. Website: www.westinautomotive.com.

Interior Components/Accessories

Alea Leather Specialist Inc.: Distributor and manufacturer of premium-quality leather seat covers and car accessory products throughout North America. Contact: www.alealeather.com/eng/news_detail.php?cat_id=1&id=114. Website: www.alealeather.com.

BedRug Inc.: BedRug or BedTred truck bedliner, TrailerWare interior protective wall covering kit, Jeep protective covering (similar to BedRug and BedTred). Contact: Ryan Herman, 734-372-8120, rherman@bedrug.com. Website: www.bedrug.com.

BOLT Locks by STRATTEC: Padlocks, receiver hitch locks, cable locks, spare tire locks, tailgate handle locks and toolbox retrofit handle kits. Contact: Casey Milano, 330-244-9980, casey@mcculloughpr.com. Website: www.boltlock.com.

Delta Tech Industries LLC: LED interior lights. Contact: Tom Ameduri, 909-673-1900, tom@deltalights.com. Website: www.deltalights.com.

Haltech Engine Management Systems: Wideband far kit with display. Contact: Steve Nichols, Steve@haltech.com, 760-598-1941. Website: www.haltech.com.

Intellitronix Corp.: Digital LED gauges and tachometers. Contact: Joe Young, 440-413-5003, joe.young@intellitronix.com. Website: www.intellitronix.com.

Monster Hooks Inc.: Monster Hook, Mini Monster Hook, The Ultimate Recovery Hook! Diesel Hex Flo Exhaust Tips. Contact: Marco Najarro, 408-313-0716, marco@monsterhooksinc.com. Website: www.monsterhooksinc.com.

RAM Mounting Systems: iPad, tablet, cell phone, laptop and netbook mounts. Contact: Jacob Parker, 206-763-8361, ext. 111, jacob.parker@rammount.com. Website: www.rammount.com.

StreetGlow Inc.: LED lighting. Contact: Jack Panzarella, 973-709-9000, ext. 103, jackp@streetglow.com. Website: www.streetglow.com.

Quiet Ride Solutions: AcoustiShield thermal acoustic auto insulation (pre-cut, ready-to-install kits) and firewall insulation panels for 1,200 popular cars and trucks. Contact: Timothy Cox, 209-942-4777, timcox@quietride.com. Website: www.quietride.com.

Roadwire: Leather interiors and sunroofs. Contact: Tracy Pena, tracyp@roadwire.com, 877-762-3947. Website: www.roadwire.com.

VDO Instrumentation & Accessories: VDO gauges and accessories. Contact: AnnaMaria Blose, 610-289-0488, annamaria.blose@continental-corporation.com. Website: www.vd-gauges.com.

Warrior Products: Dashboards, dash overlays, interior grab handles for Jeeps. Contact: Jason Roy, jason@warriorproducts.com, 503-691-8915. Website: www.warriorproducts.com.

XS Power Batteries: 0, 2, 4, and 8 AWG power and ground wire with accessories. Contact: Nathan Way, 888-497-7693, nathan@xspowerbatteries.com. Website: www.4XSPower.com.

Suspension/Brake Components

ADDCO Industries Inc.: ADDCO is a leading manufacturer of performance sway bars, celebrating its 50th anniversary. Go to the company's website and the online catalog to find your specific application. If it isn't listed, call to see if it's in production or a custom sway bar can be made. Contact: Jason R. Sakurai, spdnmotion@yahoo.com or jason@addco.net, 828-260-2324. Website: www.addco.net. 

BMF Wheels: BMF leveling kits available for Chevy, Dodge, Ford, Toyota, Nissan and Jeep. Contact: Blake Ramthun, 888-313-2580, blake@bmfwheels.com. Website: www.bmfwheels.com.

Eibach: Eibach sport suspension springs for the new Camaro, Challenger, Scion FR-S, Subaru BRZ, BMW 3-Series and more. Contact: Tony Jackson, tjackson@eibach.com, 951-256-8300. Website: www.eibach.com. 

E-Stopp: Aftermarket push-button electronic E-brake. Contact: Jonathan Mill, jmill@estopp.com, 562-602-2842.

Granatelli Motor Sports Inc.: ’10–’13 Camaro suspension and brake upgrades; ’79–’12 Mustang suspension and brake upgrades. Contact: J.R. Granatelli, 805-486-6644, jrgranatelli@granatellimotorsports.com. Website: www.granatellimotorsports.com.

Hellwig Products Co. Inc.: Sway bars, air springs. Contact: Melanie White, mwhite@hellwigproducts.com, 559-799-3642. Website: www.hellwigproducts.com.

MGP Caliper Covers: MGP Caliper Covers. Custom logo engravings and custom paint also available for approved candidates. Contact: Ben Wong, 877-995-0003, ben.wong@calipercovers.com. Website: www.calipercovers.com.

ProRYDE Suspension Systems: Lift and leveling kits, tunable front and rear ride height to achieve your exact look, suspension geometry components, adjustable camber/caster ball joints, pinion angle cam bolts, etc. Contact: Shawn Leibfried, 888-813-7933, shawn@northstarmfg.com. Website: www.proryde.com.

Road Magnet Performance Springs: Precision suspension springs. Contact: Mark Habicht, 410-686-9100, mark@roadmagnet.com. Website: www.roadmagnet.com.

Superlift Suspension Systems: Suspension lift and leveling systems and related off-road accessories for light truck, Jeep and SUV applications. Contact: Joey Arbogast, 318-397-3024, jarbogast@superlift.com. Website: www.superlift.com.

Other Products & Services

BMF Wheels: Available for Chevy, Dodge, Ford, Toyota, Nissan and Jeep, including 17x9, 18x9 and 20x9 in EZ-FIT wheel offerings for leveled and lifted applications, and 20x10, 22x9.5, 22x10.5 and 24x10.5 wheel offerings for lifted applications. Contact: Blake Ramthun, 888-313-2580, blake@bmfwheels.com. Website: www.bmfwheels.com.

DeatschWerks: Fuel pumps. Contact: Greg Brungardt, 405-217-0718, Greg@DeatschWerks.com. Website: www.DeatschWerks.com.

Excalibur Wheel Accessories/McLEAN Wire Wheels: Vintage wheels and wheel accessories. Contact: Robert Klippel, bob@excaliburwheel.com, 909-923-8300. Website: www.excaliburwheelaccessories.com.

Extang/TruXedo/BedRug/UnderCover: Bed lights. Contact: Steve Kelley, 734-434-3516, skelley@extang.com. Website: www.extang.com.

Firestone Industrial Products: Complete suspension solutions that include Ride-Rite, Sport-Rite, Coil-Rite and Level-Rite air helper springs, plus the R4Tech hybrid air suspension system, designed to maximize the safe load-carrying capacity, stability and ride quality of cars, trucks and SUVs. Contact: Casey Milano, casey@mcculloughpr.com, 330-244-9980. Website: www.ride-rite.com.

Haltech Engine Management Systems: Wideband kits with display. Contact: Steve Nichols, Steve@haltech.com, 760-598-1941. Website: www.haltech.com.

Hornblasters Inc.: Air horns/train horns. Contact: Rigo, 813-783-8058, ext. 305, Rigo@HornBlasters.com, Website: www.HornBlasters.com.

Squash Performance: High-flow, in-tank dual and triple pump fuel systems for ’03+ Ram, ’10+ Camaro, Dodge Charger/Magnum/Challenger, Mazda Speed 3 and 6, Pontiac G8 and Lexus IS. Contact: Andy Quaas, 262-724-8035, aquaas@squashperformance.com. Website: squashperformance.com.
StreetGlow Inc.: LED lighting. Contact: Jack Panzarella, 973-709-9000, ext. 103, jackp@streetglow.com. Website: www.streetglow.com.

Truck Accessories Group-LEER/Century/Raider/Pace Edwards: Fiberglass caps and tonneaus, aluminum commercial caps, retractable tonneau covers. Contact: Patricia Stewart, 916-771-0196, pstewart@truckgroup.com. Website: www.truckgroup.com/brands.

Job-Hunting? Top Automotive Jobs Here
Thu, 08/02/2012 - 09:21

Are you hunting for a new job? The “Positions Available” section in the SEMA Member Classifieds lists more than 50 job openings around the country. Here are some of the latest classifieds posted to the website.

  • Winbo USA, located in Corona, California, is hiring a mechanical designer – engineer who is proficient in Solid Works or Auto-CAD with a minimum of two years' experience. The ideal candidate must be able to establish and maintain strong relationships throughout the R&D department and install and test components on vehicles.
  • Restoration mechanics are wanted to relocate to a former U.S. military base in the Philippines for a minimum of 12 months. The company needs three specialists: One in English classics, from Jaguars to Rolls-Royces; one for European classics with an emphasis on Mercedes-Benz; and one for U.S. classics and musclecars. Candidates should have at least five years' experience in their specialty.
  • Dave Stribling Restorations, located in Crawfordsville, Indiana, is hiring an experienced fabricator/painter/automotive technician with experience in fabricating bodywork and has overall automotive technical skills. The shop specializes in Ford Mustangs.
  • JMPR Public Relations Inc., located in Woodland Hills, California, is hiring an account executive. The successful candidate will have a minimum of 2–3 years' experience at a PR firm, hold a degree in journalism or public relations, can handle several accounts concurrently and have a strong knowledge of AP writing style.

More automotive job listings.

Job-Hunting? Top Automotive Jobs Here
Thu, 08/02/2012 - 09:21

Are you hunting for a new job? The “Positions Available” section in the SEMA Member Classifieds lists more than 50 job openings around the country. Here are some of the latest classifieds posted to the website.

  • Winbo USA, located in Corona, California, is hiring a mechanical designer – engineer who is proficient in Solid Works or Auto-CAD with a minimum of two years' experience. The ideal candidate must be able to establish and maintain strong relationships throughout the R&D department and install and test components on vehicles.
  • Restoration mechanics are wanted to relocate to a former U.S. military base in the Philippines for a minimum of 12 months. The company needs three specialists: One in English classics, from Jaguars to Rolls-Royces; one for European classics with an emphasis on Mercedes-Benz; and one for U.S. classics and musclecars. Candidates should have at least five years' experience in their specialty.
  • Dave Stribling Restorations, located in Crawfordsville, Indiana, is hiring an experienced fabricator/painter/automotive technician with experience in fabricating bodywork and has overall automotive technical skills. The shop specializes in Ford Mustangs.
  • JMPR Public Relations Inc., located in Woodland Hills, California, is hiring an account executive. The successful candidate will have a minimum of 2–3 years' experience at a PR firm, hold a degree in journalism or public relations, can handle several accounts concurrently and have a strong knowledge of AP writing style.

More automotive job listings.

Job-Hunting? Top Automotive Jobs Here
Thu, 08/02/2012 - 09:21

Are you hunting for a new job? The “Positions Available” section in the SEMA Member Classifieds lists more than 50 job openings around the country. Here are some of the latest classifieds posted to the website.

  • Winbo USA, located in Corona, California, is hiring a mechanical designer – engineer who is proficient in Solid Works or Auto-CAD with a minimum of two years' experience. The ideal candidate must be able to establish and maintain strong relationships throughout the R&D department and install and test components on vehicles.
  • Restoration mechanics are wanted to relocate to a former U.S. military base in the Philippines for a minimum of 12 months. The company needs three specialists: One in English classics, from Jaguars to Rolls-Royces; one for European classics with an emphasis on Mercedes-Benz; and one for U.S. classics and musclecars. Candidates should have at least five years' experience in their specialty.
  • Dave Stribling Restorations, located in Crawfordsville, Indiana, is hiring an experienced fabricator/painter/automotive technician with experience in fabricating bodywork and has overall automotive technical skills. The shop specializes in Ford Mustangs.
  • JMPR Public Relations Inc., located in Woodland Hills, California, is hiring an account executive. The successful candidate will have a minimum of 2–3 years' experience at a PR firm, hold a degree in journalism or public relations, can handle several accounts concurrently and have a strong knowledge of AP writing style.

More automotive job listings.

Job-Hunting? Top Automotive Jobs Here
Thu, 08/02/2012 - 09:21

Are you hunting for a new job? The “Positions Available” section in the SEMA Member Classifieds lists more than 50 job openings around the country. Here are some of the latest classifieds posted to the website.

  • Winbo USA, located in Corona, California, is hiring a mechanical designer – engineer who is proficient in Solid Works or Auto-CAD with a minimum of two years' experience. The ideal candidate must be able to establish and maintain strong relationships throughout the R&D department and install and test components on vehicles.
  • Restoration mechanics are wanted to relocate to a former U.S. military base in the Philippines for a minimum of 12 months. The company needs three specialists: One in English classics, from Jaguars to Rolls-Royces; one for European classics with an emphasis on Mercedes-Benz; and one for U.S. classics and musclecars. Candidates should have at least five years' experience in their specialty.
  • Dave Stribling Restorations, located in Crawfordsville, Indiana, is hiring an experienced fabricator/painter/automotive technician with experience in fabricating bodywork and has overall automotive technical skills. The shop specializes in Ford Mustangs.
  • JMPR Public Relations Inc., located in Woodland Hills, California, is hiring an account executive. The successful candidate will have a minimum of 2–3 years' experience at a PR firm, hold a degree in journalism or public relations, can handle several accounts concurrently and have a strong knowledge of AP writing style.

More automotive job listings.

Las Vegas Issues Collector Car Appreciation Day Proclamation
Thu, 08/02/2012 - 09:21

Las Vegas Mayor Carolyn G. Goodman and the Las Vegas City Council issued a proclamation declaring “Collector Car Appreciation Day” in the city. Earlier this year, the U.S. Senate passed Senate Resolution 452 at SEMA’s request to acknowledge the day’s significance in raising awareness of the vital role automotive restoration and collection plays in American society. In addition to Las Vegas, lawmakers in several states and Canada followed the U.S. Senate’s lead. New York, New Mexico, Idaho, West Virginia and Hawaii, along with the Canadian Province of Manitoba adopted their own resolution commemorating the day.  

On July 13, 2012, automotive enthusiasts, car clubs, organizations and affiliated businesses participated in celebrations to honor the third annual Collector Car Appreciation Day (CCAD). Nearly 200 official events were held in the United States, Canada and Australia. A gallery of images from these gatherings is now available on the CCAD homepage.

Event organizers who have not yet submitted their images to us for publication may e-mail them to SEMA Action Network (SAN) Director Colby Martin at san@sema.org with “2012 Collector Car Event Photos” as the subject line. Include your event details (name, date, city, state and host) in the message as well.

SEMA would like to thank everyone who supported our hobby’s “holiday” this year. Stay tuned for the announcement of next year’s celebration!

 extreme
Extreme Automotive in Corona, California, hosted a Collector Car Appreciation Open House at their shop.		 ccad
Hawaii State Representative Karen Awana presented a resolution to members of Ron's Performance Center and local enthusiasts at the state's capitol in Honolulu.
   
 panoramic
ROUSH Performance employees in Plymouth, Michigan, filled their facility’s lot with specialty vehicles.		  roush
This drag-racing car campaigned by Jack Roush's son-in-law Dale was included in ROUSH Performance’s display.
   
 roush
SEMA Hall of Fame member “Speedy” Bill Smith and his staff from Speedway Motors Inc. celebrated in Lincoln, Nebraska. 		 lokar
Skip and Debbie Walls of Lokar Performance Products welcomed Knox County Mayor Tim Burchett to their event in Knoxville, Tennessee.
   
 vintage
In San Antonio, Texas, the employees of Vintage Air drove their collector cars to the company’s office.		  collector
AutoTrader Classics in Atlanta invited all AutoTrader.com employees to drive their special ride to work and celebrate.
   
Las Vegas Issues Collector Car Appreciation Day Proclamation
Thu, 08/02/2012 - 09:21

Las Vegas Mayor Carolyn G. Goodman and the Las Vegas City Council issued a proclamation declaring “Collector Car Appreciation Day” in the city. Earlier this year, the U.S. Senate passed Senate Resolution 452 at SEMA’s request to acknowledge the day’s significance in raising awareness of the vital role automotive restoration and collection plays in American society. In addition to Las Vegas, lawmakers in several states and Canada followed the U.S. Senate’s lead. New York, New Mexico, Idaho, West Virginia and Hawaii, along with the Canadian Province of Manitoba adopted their own resolution commemorating the day.  

On July 13, 2012, automotive enthusiasts, car clubs, organizations and affiliated businesses participated in celebrations to honor the third annual Collector Car Appreciation Day (CCAD). Nearly 200 official events were held in the United States, Canada and Australia. A gallery of images from these gatherings is now available on the CCAD homepage.

Event organizers who have not yet submitted their images to us for publication may e-mail them to SEMA Action Network (SAN) Director Colby Martin at san@sema.org with “2012 Collector Car Event Photos” as the subject line. Include your event details (name, date, city, state and host) in the message as well.

SEMA would like to thank everyone who supported our hobby’s “holiday” this year. Stay tuned for the announcement of next year’s celebration!

 extreme
Extreme Automotive in Corona, California, hosted a Collector Car Appreciation Open House at their shop.		 ccad
Hawaii State Representative Karen Awana presented a resolution to members of Ron's Performance Center and local enthusiasts at the state's capitol in Honolulu.
   
 panoramic
ROUSH Performance employees in Plymouth, Michigan, filled their facility’s lot with specialty vehicles.		  roush
This drag-racing car campaigned by Jack Roush's son-in-law Dale was included in ROUSH Performance’s display.
   
 roush
SEMA Hall of Fame member “Speedy” Bill Smith and his staff from Speedway Motors Inc. celebrated in Lincoln, Nebraska. 		 lokar
Skip and Debbie Walls of Lokar Performance Products welcomed Knox County Mayor Tim Burchett to their event in Knoxville, Tennessee.
   
 vintage
In San Antonio, Texas, the employees of Vintage Air drove their collector cars to the company’s office.		  collector
AutoTrader Classics in Atlanta invited all AutoTrader.com employees to drive their special ride to work and celebrate.
   
Las Vegas Issues Collector Car Appreciation Day Proclamation
Thu, 08/02/2012 - 09:21

Las Vegas Mayor Carolyn G. Goodman and the Las Vegas City Council issued a proclamation declaring “Collector Car Appreciation Day” in the city. Earlier this year, the U.S. Senate passed Senate Resolution 452 at SEMA’s request to acknowledge the day’s significance in raising awareness of the vital role automotive restoration and collection plays in American society. In addition to Las Vegas, lawmakers in several states and Canada followed the U.S. Senate’s lead. New York, New Mexico, Idaho, West Virginia and Hawaii, along with the Canadian Province of Manitoba adopted their own resolution commemorating the day.  

On July 13, 2012, automotive enthusiasts, car clubs, organizations and affiliated businesses participated in celebrations to honor the third annual Collector Car Appreciation Day (CCAD). Nearly 200 official events were held in the United States, Canada and Australia. A gallery of images from these gatherings is now available on the CCAD homepage.

Event organizers who have not yet submitted their images to us for publication may e-mail them to SEMA Action Network (SAN) Director Colby Martin at san@sema.org with “2012 Collector Car Event Photos” as the subject line. Include your event details (name, date, city, state and host) in the message as well.

SEMA would like to thank everyone who supported our hobby’s “holiday” this year. Stay tuned for the announcement of next year’s celebration!

 extreme
Extreme Automotive in Corona, California, hosted a Collector Car Appreciation Open House at their shop.		 ccad
Hawaii State Representative Karen Awana presented a resolution to members of Ron's Performance Center and local enthusiasts at the state's capitol in Honolulu.
   
 panoramic
ROUSH Performance employees in Plymouth, Michigan, filled their facility’s lot with specialty vehicles.		  roush
This drag-racing car campaigned by Jack Roush's son-in-law Dale was included in ROUSH Performance’s display.
   
 roush
SEMA Hall of Fame member “Speedy” Bill Smith and his staff from Speedway Motors Inc. celebrated in Lincoln, Nebraska. 		 lokar
Skip and Debbie Walls of Lokar Performance Products welcomed Knox County Mayor Tim Burchett to their event in Knoxville, Tennessee.
   
 vintage
In San Antonio, Texas, the employees of Vintage Air drove their collector cars to the company’s office.		  collector
AutoTrader Classics in Atlanta invited all AutoTrader.com employees to drive their special ride to work and celebrate.
   
SEMA Council & Committee News: New Light Truck Products on Display in Carlisle
Thu, 08/02/2012 - 09:19

Automotive Restoration Market Organization (ARMO)
Hot Rod Industry Alliance (HRIA)
Truck and Off-Road Alliance (TORA)
Manufacturers' Rep Council (MRC)
Motorsports Parts Manufacturers Council (MPMC) Professional Restylers Organization (PRO)
Street Performance Council (SPC)
Wheel & Tire Council (WTC)
SEMA Businesswomen's Network (SBN) Young Executives Network (YEN)
TORA Logo
 
Visit TORA's website.  
TORA
TORA-member companies can have their hottest new light-truck products on display in front of thousands of enthusiasts at the Truck Nationals in Carlisle, Pennsylvania, August 3–5, 2012. Melanie White of Hellwig Industries says, “The New Products Showcase is one of my favorite benefits of TORA.” In 2011, Hellwig sent four products to Carlisle. Will your company be in the tent with Hellwig this year?		  
   

New Products On Display

The hottest new light-truck accessories are on display right now in the TORA New Products Showcase in Carlisle, Pennsylvania, August 3–5.

What are members saying about the TORA New Products Showcase?

“The New Products Showcase is one of my favorite benefits of TORA,” said TORA Chair-Elect Melanie White of Hellwig Industries. “This is our third year participating and it just keeps getting better. This year there will be a Jeep onsite that will be turned from a stock vehicle into a fully customized rig by the end of the weekend—and all in front of an audience. As a manufacturer we get to exhibit our new products in front of truck enthusiasts for the weekend for only the cost of shipping product. A professional photo is taken of the product that lives on the TORA website in a gallery, and is shown in the TORA booth at the SEMA Show as well; it’s a bargain for the amount of exposure.”

TORA jeep
Looks like Christmas in July as Bob Smeigh and the gang at RV 4 Wheel Drive & Performance Automotive get ready for the Jeep Build at the Carlisle Truck Nationals, August 3–5. Products from TORA-member companies will be installed on a ’12 Jeep Rubicon in front of a live audience during the event.		  
   

TORA Readies for Carlisle Jeep Build

An added feature to this year’s TORA New Products Showcase event at the Carlisle Truck Nationals is a live vehicle build-out. Technicians from TORA-member retailer RV 4Wheel Drive & Performance Automotive in Mechanicsburg, Pennsylvania, will transform a ’12 Jeep Rubicon from stock to fully modified and accessorized, right in front of the thousands of light-truck enthusiasts attending the event.

TORA thanks the following companies for participating in the project: Airaid, Bestop, Cepek, Daystar, Flowmaster, GoRhino!, Hella, Hellwig, Mickey Thompson, N-Fab, Putco, Rampage, Rolling Big Power, Skid Row, Skyjacker, Stratec, Superchips, Superlift, Timbren, Warn, Weathertech and Westin.

Are you on Facebook, LinkedIn or Twitter? TORA Is!

Be sure to follow TORA on all of your favorite social networking sites.

To find these sites, go to www.sema.org/TORA and use the links in the top right-hand corner.

TORA Column in SEMA Member News

Read TORA's column featured in the July/August issue of SEMA Member News.

For more information about TORA, contact Jim Skelly.

Back to Top

ARMO Logo

Visit ARMO's website.

Why ARMO?

Is your business involved in the restoration segment and not yet an ARMO member? In addition to direct access with its 275 restoration company members, the Automotive Restoration Market Organization (ARMO) provides a number of other benefits, including education and outreach for small businesses in the restoration market, product exposure through an annual New Products Showcase and collective support of the restoration hobby.

Top Reasons to Join ARMO:

  • Networking Opportunities: The primary strength of ARMO is its member companies. The organization provides multiple venues for ARMO members to interact and share ideas through its long-range planning meetings, new-products mixer at Spring Carlisle and the ARMO awards reception at the 2012 SEMA Show, as well as discussion groups on MySEMA and social media websites.
  • Education: The annual ARMO education seminars at the Hotrod & Restoration Trade Show bring industry leaders and experts together to share their real-world experience with small-business owners, providing tips and insights to help them grow their businesses. The ARMO Restoration Trademark Licensing Guide provides ARMO members with the basic forms needed to begin the process of getting products licensed by an original-equipment manufacturer. The licensing guide is available through the SEMA Education Institute.
  • Supporting Hobby Growth: ARMO recognizes the importance of the individual hobbyist to the industry and supports Collector Car Appreciation Day activities across the country. Every April, the ARMO New Products Showcase puts member company products directly in front of 100,000+ restoration enthusiasts each year at Spring Carlisle. In addition, ARMO’s “Take a Kid to a Car Show” (TKCS) program strives to get children involved in automotive hobbies at an early age. The interactive TKCS website provides information on how to get involved for kids and adults alike.

Contact ARMO’s staff liaison Jim Skelly at jimsk@sema.org for more information.

Are you on Facebook, LinkedIn or Twitter? ARMO Is!

Be sure to follow ARMO on all of your favorite social networking sites. To find these sites, go to www.sema.org/armo and use the links in the top right-hand corner.

ARMO Column in SEMA Member News

Read ARMO's column featured in the July/August issue of SEMA Member News.

For more information about ARMO, contact Jim Skelly.

Back to Top

HRIA Logo
 
Visit HRIA's website

Are you on Facebook, LinkedIn or Twitter? HRIA is!

Be sure to follow HRIA on all of your favorite social networking sites. To find these sites, go to www.sema.org/hria and use the links in the top right-hand corner.

HRIA Column in SEMA Member News

Read HRIA's column featured in the July/August issue of SEMA Member News.

For more information about HRIA and how to join, contact Zane Clark or call 909/978-6696.

Back to Top

MPMC Logo
 
Visit MPMC's website.  

Media Trade Conference Moves to Orange County

The 2013 MPMC Media Trade Conference will be held at the Embassy Suites Orange County Airport North in Santa Ana, California. The move was necessitated due to major property renovation at the El Segundo location, scheduled for the same time as the 2013 Conference.

“We have certainly enjoyed many successful events at the El Segundo property,” said MPMC Chairman Vic Wood of Hedman. “But major construction, with the noise and dust and what all, could mar the great times we’ve had there forever. This Orange County property is only a few miles from John Wayne airport, offers free shuttles, lots of parking and a staff that I’m told is very enthusiastic about hosting this event. The layout of the property is going to provide a whole new look and feel, and overall, I think we’re in for another outstanding event.”

Media Trade Conference Registration is Open

MPMC-member companies may now register for a chance at one of the 100 available exhibitor suites at the 2013 MPMC Media Trade Conference, which will take place January 22–24, 2013, at a new location. The 2013 event will be held at the Embassy Suites Orange County Airport North in Santa Ana, California. Exhibitor registration remains open until September 7, 2012. MPMC-member manufactures may register on the MPMC website.

Not an MPMC member? Join at www.sema.org/mpmc.

For more information, contact Jim Skelly at SEMA at 909-978-6690 or e-mail at jimsk@sema.org.

  mpmc hof
The first four members of the MPMC Hall of Fame were inducted in 2010. From left, Jeep Worthan, John Menzler, Scooter Brothers and, accepting for Amy Faulk, Chris Fairless. The first step toward being a member of the MPMC Hall of Fame is a nomination. If you know anyone who deserves a place alongside these and other legends of our industry, please submit an online nomination now.
   

Nominations Open for MPMC Hall of Fame

The Motorsports Parts Manufacturers Council (MPMC) is now accepting nominations for its 2012 Hall of Fame. MPMC Hall of Fame nominations will be open through August 3, 2012. When nominations close, a special task force will evaluate the nominations for compliance with the award criteria. When final nominees are selected, the task force then utilizes a scoring system to determine the inductees. The honorees are formally inducted during a breakfast ceremony on Friday morning at the PRI Show in Orlando, Florida.

Founded in 2010, the MPMC Hall of Fame permanently acknowledges those who have made a significant contribution to the MPMC and/or the motorsports manufacturing segment of the aftermarket. Past inductees to the MPMC Hall of Fame include:

  • 2010: Amy Faulk, Scooter Brothers, Jeep Worthan, and John Menzler
  • 2011: Chuck Blum, Todd Gartshore, Rick Rollins and Nate Shelton

There are so many individuals deserving of a place in the MPMC Hall of Fame. But first, they must be nominated. If you know of anyone who meets the award criteria, please take a moment to submit a nomination on the MPMC Hall of Fame Nominations form.

If you have any questions, contact MPMC staff liaison Jim Skelly at 909-978-6690 or jimsk@sema.org.

Are you on Facebook, LinkedIn or Twitter? MPMC Is!

Be sure to follow MPMC on all of your favorite social networking sites. To find these sites, go to www.sema.org/mpmc and use the links in the top right-hand corner.

Take a Friend to a Race Fan Page

The MPMC Motorsports Awareness campaign, highlighted by the Take a Friend to a Race program, now has its very own Fanpage on Facebook. If you’re not a fan yet, you should be!

MPMC Column in SEMA Member News

Read MPMC's column featured in the July/August issue of SEMA Member News.

For information about MPMC, contact Jim Skelly.

Back to Top

MRC Logo
 
Visit MRC's website.  

Are you on Facebook, LinkedIn or Twitter? MRC is!

Be sure to follow MRC on all of your favorite social networking sites. To find these sites, go to www.sema.org/mrc and use the links in the top right-hand corner.

MRC Column in SEMA Member News

Read MRC's column featured in the July/August issue of SEMA Member News.

For information about MRC, contact Zane Clark.

Back to Top

PRO Logo
 
Visit PRO's website.  

Are you on Facebook, LinkedIn or Twitter? PRO Is!

Be sure to follow PRO on all of your favorite social networking sites. To find these sites, go to www.sema.org/pro and use the links in the top right-hand corner.

PRO Column in SEMA Member News

Read PRO's column featured in the July/August issue of SEMA Member News.

For information about PRO, contact Zane Clark or call 909/978-6696.

Back to Top

SBN Logo
 
Visit SBN's website.
 

  sbn build
Theresa Contreras of L&G Enterprises will lead the paint/body team during each phase of the SEMA Mustang Build Powered by Women.
   

Now Underway: SEMA Mustang Build Powered By Women

For this year’s SEMA Show, Ford Motor Co. and SEMA have teamed up on a unique project: the SEMA Mustang Build Powered by Women. Under the direction of the SEMA Businesswomen’s Network (SBN) and built entirely by SBN members, the project is designed to shine the light on women working in the automotive aftermarket and encourage more women to pursue careers in the industry.

Donated by Ford Motor Co., the vehicle will be auctioned on eBay, with proceeds benefitting the SEMA Memorial Scholarship Fund, thereby helping to foster the industry’s next generation of leaders. The satin-black luxury Mustang concept, designed by Jennifer Seely of Ford and known as High Gear, was adopted after an intense period of Internet voting and an ambitious, detailed build schedule was developed.

The first to get their hands on the donated ’13 Mustang GT were SBN members Theresa Contreras and Sara Morosan of L&G Enterprises in San Dimas, California. L&G is an award-winning, family-owned, full-service paint and body shop that has developed a national reputation for custom paint and design. L&G’s work has appeared on more than a dozen magazine covers and at many custom car shows, and its team regularly builds customs that end up at the SEMA Show.

Contreras is an experienced car builder and custom painter, and Morosan is L&G’s sales manager. Both grew up working in the L&G body shop and clearly relished the job at hand.

The High Gear Mustang GT came in white from the factory but is slated to receive a custom black-satin exterior finish. The paint is scheduled to be the last job in the build sequence, but because the plan includes adding underhood performance mods, the engine compartment needed to be painted first. That meant that all of the engine accessories bolted to the fenderwells, firewall and framerails had to be removed, along with the entire front clip, before the engine compartment could be painted black.

Contreras and Morosan, working as a team, took on the tedious job of removing everything that might hinder a perfect underhood paint job, which included removing components, such as the battery and battery box, air intake and air filter, brake line plumbing, hood-release mechanism, CPU, wipers and washer fluid reservoir, driving lights and fog lights and the hood and entire front bumper, plus all of the assorted pieces of insulation and heat shielding, among other things. The hardware was meticulously labeled and stored in plastic bags, and all of the connectors and fasteners were taped off and labeled.

After a few hours of work, the white engine compartment walls and frame rails were completely exposed. Factory stickers and labels were removed, then the engine and remaining lines and wiring harness pieces were masked off and all of the white underhood surfaces were sanded and wiped down with tack cloth prior to painting.

The next stop was the spray booth, where Contreras carefully sprayed the underhood area, paying special attention to all the little nooks and crannies that might show if any white remained visible. When she was satisfied, the paint was allowed to dry, and all of the pieces that had been removed for painting were carefully re-installed, including the factory labels. The end result was an all-black underhood area that looked exactly as if it had come that way from the factory.

Next stop for the High Gear Mustang will be the shop at Source Interlink Media headquarters, where other teams of SBN-member volunteer workers will add more custom touches, such as quilted suede seats and Rosegold chrome accents throughout the exterior and interior. They will also make modifications to the engine, undercarriage, drivetrain and sound system. When the process is complete, the car will come back to L&G for the exterior paint work.

The SBN vehicle build task force is comprised of Task Force Chair Rose Kawasaki (Exports International), Project Vehicle Coordinator Sherry Kollien (Ford Motor Co.), Assembly Coordinator Kellie Colf (Colf Creative Resources), PR/Media Coordinator Camee Edelbrock (Schiefer Media Inc.) and Product Coordinator Susan Carpenter (JR Products). Advisors include Mike Spagnola (Street Scene Equipment), Joel Ayres (Bedslide/Takit) and Marla Moore (Hypertech).

To learn more about the SEMA Mustang Build Powered by Women, visit www.SEMA.org/SEMAmustangbuild, or contact Bryan Harrison, SEMA's senior manager of councils and the build's project manager at bryanh@sema.org. 

Are you on Facebook, LinkedIn or Twitter? SBN is!

Be sure to follow SBN on all of your favorite social networking sites. To find these sites, go to www.sema.org/sbn and use the links in the top right-hand corner.

SBN Column in SEMA Member News

Read SBN's column featured in the July/August issue of SEMA Member News.

For information about SBN, contact Bryan Harrison.

Back to Top


SPC Logo
 
Visit SPC's website.  
Are you on Facebook, LinkedIn or Twitter? SPC is!

Be sure to follow SPC on all of your favorite social networking sites. To find these sites, go to www.sema.org/spc and use the links in the top right-hand corner.

SPC Column in SEMA Member News

Read SPC's column featured in the July/August issue of SEMA Member News.

For information about SPC, contact Bryan Harrison.

Back to Top

WTC Logo
 
Visit WTC's website

Are you on Facebook, LinkedIn or Twitter? WTC is!

Be sure to follow WTC on all of your favorite social networking sites. To find these sites, go to www.sema.org/wtc and use the links in the top right-hand corner.

WTC Column in SEMA Member News

Read WTC's column featured in the July/August issue of SEMA Member News.

For information about WTC and how to join, contact Zane Clark or call or 909/978-6696.

Back to Top

YEN Logo

Visit YEN's website

YEN Member Wins iPad for Autistic Son for Membership Initiative Participation

It’s almost noon on a Thursday and I’m driving through rural Oklahoma when my cell phone rings. I look at the screen, which displays the name Bryan Harrison, SEMA's senior manager of councils. Not totally out of the ordinary since I serve on the YEN Select Committee, but I knew we didn’t have a call scheduled for the day. When I answered, he proceeded to congratulate me on winning an iPad for my participation in our YEN membership initiative in which we collectively increased our membership to more than 1,000. We chatted briefly about work and the current state of the industry as a whole and he signed off by saying something along the lines of, “hopefully this brightened your day.” Bryan likely had no idea just how much those words would ring true.

If you’ve met me, you know I’m an outgoing cut-up who doesn’t take things too seriously, but what you may not know about me is that I have a 10-year-old son named Jake who has Asperger’s Syndrome—a high-functioning form of autism. In meeting Jake, he comes off as your average 10-year-old who shares my passion for all things automotive and loves Star Wars and superheroes. But to live with him is to know the constant struggles Jake faces to navigate through daily tasks and situations that most would deem routine.

It should come as no surprise that Jake’s greatest challenges occur in the classroom, and that is why he spends upwards of 10 hours per week working with an occupational therapist on everything from handwriting to how to interact with peers in social situations. This past year, our school district received a grant to purchase a few iPads for the occupational therapy department after recent studies had shown that autistic children responded very well to the touch-screen interaction. My wife and I had been tossing around the idea of purchasing one for Jake at the time that I received the phone call from Bryan. Little did he know, he was not just brightening my day, but brightening Jake's life.

Research has shown that individuals with Asperger’s can go on to lead very normal, fulfilling lives. If you Google “Famous people with Asperger’s,” it will provide you with a surprising list of people, such as Bill Gates and filmmaker Tim Burton, along with suspected historical cases, such as Abe Lincoln, Andy Warhol and Albert Einstein. Even more surprising is the number of children currently born with some form of autism. One in 88 has become the medically recognized statistic of the current rate of children born with autism. With numbers like that, chances are you or somebody you know has some sort of link to autism and, if so, I’d like to hear from you. My e-mail is listed below this article. My 1 in 88, Jake and I would like to say thank you to Bryan Harrison and SEMA for the iPad as it means much more to him than you could ever imagine.

Matt Reasoner
Regional sales manager, BedRug Inc.
YEN Select Committee Member
mreasoner@bedrug.com

YEN Member of the Month Spotlight

Did you know that YEN has a Member of the Month Spotlight on the SEMA website and that anyone can be nominated? To view previous selections or to make a nomination, visit www.sema.org/yen.

Are you on Facebook, LinkedIn or Twitter? YEN is!

Be sure to follow YEN on all of your favorite social networking sites. To find these sites, go to www.sema.org/yen and use the links in the top right-hand corner.

YEN Column in SEMA Member News

Read YEN's column featured in the July/August issue of SEMA Member News.

For information about YEN, contact Bryan Harrison.

Back to Top

Join the SEMA Council Family

SEMA hosts 10 distinct councils and committees that represent focused niches within the specialty-equipment industry. These groups are comprised of elected volunteers (Select Committee) who guide and direct council activities while representing the membership at large. Although each council acts independently and represents a different segment, they are all focused on the betterment of the industry as a whole.

The value councils provide SEMA and the industry is beyond refute. It is inspiring to witness a diverse collection of company representatives, many of which are direct competitors, come together and develop educational, training, youth awareness and networking events that are, at the core, designed to give back and promote business. An equally important council function is to ensure that SEMA sustains a pulse on the industry and maintains a presence with its members.

The question is often asked, “Why should my company join a council?” The answer is simple. SEMA councils open the doors and provide you exposure to industry leaders, decision makers, trendsetters and a community of like-minded individuals who share your passion and desire to see business succeed and prosper. Once the doors are open, it is your responsibility to take advantage of the benefits by becoming actively involved.

Learn more today.

SEMA Council & Committee News: New Light Truck Products on Display in Carlisle
Thu, 08/02/2012 - 09:19

Automotive Restoration Market Organization (ARMO)
Hot Rod Industry Alliance (HRIA)
Truck and Off-Road Alliance (TORA)
Manufacturers' Rep Council (MRC)
Motorsports Parts Manufacturers Council (MPMC) Professional Restylers Organization (PRO)
Street Performance Council (SPC)
Wheel & Tire Council (WTC)
SEMA Businesswomen's Network (SBN) Young Executives Network (YEN)
TORA Logo
 
Visit TORA's website.  
TORA
TORA-member companies can have their hottest new light-truck products on display in front of thousands of enthusiasts at the Truck Nationals in Carlisle, Pennsylvania, August 3–5, 2012. Melanie White of Hellwig Industries says, “The New Products Showcase is one of my favorite benefits of TORA.” In 2011, Hellwig sent four products to Carlisle. Will your company be in the tent with Hellwig this year?		  
   

New Products On Display

The hottest new light-truck accessories are on display right now in the TORA New Products Showcase in Carlisle, Pennsylvania, August 3–5.

What are members saying about the TORA New Products Showcase?

“The New Products Showcase is one of my favorite benefits of TORA,” said TORA Chair-Elect Melanie White of Hellwig Industries. “This is our third year participating and it just keeps getting better. This year there will be a Jeep onsite that will be turned from a stock vehicle into a fully customized rig by the end of the weekend—and all in front of an audience. As a manufacturer we get to exhibit our new products in front of truck enthusiasts for the weekend for only the cost of shipping product. A professional photo is taken of the product that lives on the TORA website in a gallery, and is shown in the TORA booth at the SEMA Show as well; it’s a bargain for the amount of exposure.”

TORA jeep
Looks like Christmas in July as Bob Smeigh and the gang at RV 4 Wheel Drive & Performance Automotive get ready for the Jeep Build at the Carlisle Truck Nationals, August 3–5. Products from TORA-member companies will be installed on a ’12 Jeep Rubicon in front of a live audience during the event.		  
   

TORA Readies for Carlisle Jeep Build

An added feature to this year’s TORA New Products Showcase event at the Carlisle Truck Nationals is a live vehicle build-out. Technicians from TORA-member retailer RV 4Wheel Drive & Performance Automotive in Mechanicsburg, Pennsylvania, will transform a ’12 Jeep Rubicon from stock to fully modified and accessorized, right in front of the thousands of light-truck enthusiasts attending the event.

TORA thanks the following companies for participating in the project: Airaid, Bestop, Cepek, Daystar, Flowmaster, GoRhino!, Hella, Hellwig, Mickey Thompson, N-Fab, Putco, Rampage, Rolling Big Power, Skid Row, Skyjacker, Stratec, Superchips, Superlift, Timbren, Warn, Weathertech and Westin.

Are you on Facebook, LinkedIn or Twitter? TORA Is!

Be sure to follow TORA on all of your favorite social networking sites.

To find these sites, go to www.sema.org/TORA and use the links in the top right-hand corner.

TORA Column in SEMA Member News

Read TORA's column featured in the July/August issue of SEMA Member News.

For more information about TORA, contact Jim Skelly.

Back to Top

ARMO Logo

Visit ARMO's website.

Why ARMO?

Is your business involved in the restoration segment and not yet an ARMO member? In addition to direct access with its 275 restoration company members, the Automotive Restoration Market Organization (ARMO) provides a number of other benefits, including education and outreach for small businesses in the restoration market, product exposure through an annual New Products Showcase and collective support of the restoration hobby.

Top Reasons to Join ARMO:

  • Networking Opportunities: The primary strength of ARMO is its member companies. The organization provides multiple venues for ARMO members to interact and share ideas through its long-range planning meetings, new-products mixer at Spring Carlisle and the ARMO awards reception at the 2012 SEMA Show, as well as discussion groups on MySEMA and social media websites.
  • Education: The annual ARMO education seminars at the Hotrod & Restoration Trade Show bring industry leaders and experts together to share their real-world experience with small-business owners, providing tips and insights to help them grow their businesses. The ARMO Restoration Trademark Licensing Guide provides ARMO members with the basic forms needed to begin the process of getting products licensed by an original-equipment manufacturer. The licensing guide is available through the SEMA Education Institute.
  • Supporting Hobby Growth: ARMO recognizes the importance of the individual hobbyist to the industry and supports Collector Car Appreciation Day activities across the country. Every April, the ARMO New Products Showcase puts member company products directly in front of 100,000+ restoration enthusiasts each year at Spring Carlisle. In addition, ARMO’s “Take a Kid to a Car Show” (TKCS) program strives to get children involved in automotive hobbies at an early age. The interactive TKCS website provides information on how to get involved for kids and adults alike.

Contact ARMO’s staff liaison Jim Skelly at jimsk@sema.org for more information.

Are you on Facebook, LinkedIn or Twitter? ARMO Is!

Be sure to follow ARMO on all of your favorite social networking sites. To find these sites, go to www.sema.org/armo and use the links in the top right-hand corner.

ARMO Column in SEMA Member News

Read ARMO's column featured in the July/August issue of SEMA Member News.

For more information about ARMO, contact Jim Skelly.

Back to Top

HRIA Logo
 
Visit HRIA's website

Are you on Facebook, LinkedIn or Twitter? HRIA is!

Be sure to follow HRIA on all of your favorite social networking sites. To find these sites, go to www.sema.org/hria and use the links in the top right-hand corner.

HRIA Column in SEMA Member News

Read HRIA's column featured in the July/August issue of SEMA Member News.

For more information about HRIA and how to join, contact Zane Clark or call 909/978-6696.

Back to Top

MPMC Logo
 
Visit MPMC's website.  

Media Trade Conference Moves to Orange County

The 2013 MPMC Media Trade Conference will be held at the Embassy Suites Orange County Airport North in Santa Ana, California. The move was necessitated due to major property renovation at the El Segundo location, scheduled for the same time as the 2013 Conference.

“We have certainly enjoyed many successful events at the El Segundo property,” said MPMC Chairman Vic Wood of Hedman. “But major construction, with the noise and dust and what all, could mar the great times we’ve had there forever. This Orange County property is only a few miles from John Wayne airport, offers free shuttles, lots of parking and a staff that I’m told is very enthusiastic about hosting this event. The layout of the property is going to provide a whole new look and feel, and overall, I think we’re in for another outstanding event.”

Media Trade Conference Registration is Open

MPMC-member companies may now register for a chance at one of the 100 available exhibitor suites at the 2013 MPMC Media Trade Conference, which will take place January 22–24, 2013, at a new location. The 2013 event will be held at the Embassy Suites Orange County Airport North in Santa Ana, California. Exhibitor registration remains open until September 7, 2012. MPMC-member manufactures may register on the MPMC website.

Not an MPMC member? Join at www.sema.org/mpmc.

For more information, contact Jim Skelly at SEMA at 909-978-6690 or e-mail at jimsk@sema.org.

  mpmc hof
The first four members of the MPMC Hall of Fame were inducted in 2010. From left, Jeep Worthan, John Menzler, Scooter Brothers and, accepting for Amy Faulk, Chris Fairless. The first step toward being a member of the MPMC Hall of Fame is a nomination. If you know anyone who deserves a place alongside these and other legends of our industry, please submit an online nomination now.
   

Nominations Open for MPMC Hall of Fame

The Motorsports Parts Manufacturers Council (MPMC) is now accepting nominations for its 2012 Hall of Fame. MPMC Hall of Fame nominations will be open through August 3, 2012. When nominations close, a special task force will evaluate the nominations for compliance with the award criteria. When final nominees are selected, the task force then utilizes a scoring system to determine the inductees. The honorees are formally inducted during a breakfast ceremony on Friday morning at the PRI Show in Orlando, Florida.

Founded in 2010, the MPMC Hall of Fame permanently acknowledges those who have made a significant contribution to the MPMC and/or the motorsports manufacturing segment of the aftermarket. Past inductees to the MPMC Hall of Fame include:

  • 2010: Amy Faulk, Scooter Brothers, Jeep Worthan, and John Menzler
  • 2011: Chuck Blum, Todd Gartshore, Rick Rollins and Nate Shelton

There are so many individuals deserving of a place in the MPMC Hall of Fame. But first, they must be nominated. If you know of anyone who meets the award criteria, please take a moment to submit a nomination on the MPMC Hall of Fame Nominations form.

If you have any questions, contact MPMC staff liaison Jim Skelly at 909-978-6690 or jimsk@sema.org.

Are you on Facebook, LinkedIn or Twitter? MPMC Is!

Be sure to follow MPMC on all of your favorite social networking sites. To find these sites, go to www.sema.org/mpmc and use the links in the top right-hand corner.

Take a Friend to a Race Fan Page

The MPMC Motorsports Awareness campaign, highlighted by the Take a Friend to a Race program, now has its very own Fanpage on Facebook. If you’re not a fan yet, you should be!

MPMC Column in SEMA Member News

Read MPMC's column featured in the July/August issue of SEMA Member News.

For information about MPMC, contact Jim Skelly.

Back to Top

MRC Logo
 
Visit MRC's website.  

Are you on Facebook, LinkedIn or Twitter? MRC is!

Be sure to follow MRC on all of your favorite social networking sites. To find these sites, go to www.sema.org/mrc and use the links in the top right-hand corner.

MRC Column in SEMA Member News

Read MRC's column featured in the July/August issue of SEMA Member News.

For information about MRC, contact Zane Clark.

Back to Top

PRO Logo
 
Visit PRO's website.  

Are you on Facebook, LinkedIn or Twitter? PRO Is!

Be sure to follow PRO on all of your favorite social networking sites. To find these sites, go to www.sema.org/pro and use the links in the top right-hand corner.

PRO Column in SEMA Member News

Read PRO's column featured in the July/August issue of SEMA Member News.

For information about PRO, contact Zane Clark or call 909/978-6696.

Back to Top

SBN Logo
 
Visit SBN's website.
 

  sbn build
Theresa Contreras of L&G Enterprises will lead the paint/body team during each phase of the SEMA Mustang Build Powered by Women.
   

Now Underway: SEMA Mustang Build Powered By Women

For this year’s SEMA Show, Ford Motor Co. and SEMA have teamed up on a unique project: the SEMA Mustang Build Powered by Women. Under the direction of the SEMA Businesswomen’s Network (SBN) and built entirely by SBN members, the project is designed to shine the light on women working in the automotive aftermarket and encourage more women to pursue careers in the industry.

Donated by Ford Motor Co., the vehicle will be auctioned on eBay, with proceeds benefitting the SEMA Memorial Scholarship Fund, thereby helping to foster the industry’s next generation of leaders. The satin-black luxury Mustang concept, designed by Jennifer Seely of Ford and known as High Gear, was adopted after an intense period of Internet voting and an ambitious, detailed build schedule was developed.

The first to get their hands on the donated ’13 Mustang GT were SBN members Theresa Contreras and Sara Morosan of L&G Enterprises in San Dimas, California. L&G is an award-winning, family-owned, full-service paint and body shop that has developed a national reputation for custom paint and design. L&G’s work has appeared on more than a dozen magazine covers and at many custom car shows, and its team regularly builds customs that end up at the SEMA Show.

Contreras is an experienced car builder and custom painter, and Morosan is L&G’s sales manager. Both grew up working in the L&G body shop and clearly relished the job at hand.

The High Gear Mustang GT came in white from the factory but is slated to receive a custom black-satin exterior finish. The paint is scheduled to be the last job in the build sequence, but because the plan includes adding underhood performance mods, the engine compartment needed to be painted first. That meant that all of the engine accessories bolted to the fenderwells, firewall and framerails had to be removed, along with the entire front clip, before the engine compartment could be painted black.

Contreras and Morosan, working as a team, took on the tedious job of removing everything that might hinder a perfect underhood paint job, which included removing components, such as the battery and battery box, air intake and air filter, brake line plumbing, hood-release mechanism, CPU, wipers and washer fluid reservoir, driving lights and fog lights and the hood and entire front bumper, plus all of the assorted pieces of insulation and heat shielding, among other things. The hardware was meticulously labeled and stored in plastic bags, and all of the connectors and fasteners were taped off and labeled.

After a few hours of work, the white engine compartment walls and frame rails were completely exposed. Factory stickers and labels were removed, then the engine and remaining lines and wiring harness pieces were masked off and all of the white underhood surfaces were sanded and wiped down with tack cloth prior to painting.

The next stop was the spray booth, where Contreras carefully sprayed the underhood area, paying special attention to all the little nooks and crannies that might show if any white remained visible. When she was satisfied, the paint was allowed to dry, and all of the pieces that had been removed for painting were carefully re-installed, including the factory labels. The end result was an all-black underhood area that looked exactly as if it had come that way from the factory.

Next stop for the High Gear Mustang will be the shop at Source Interlink Media headquarters, where other teams of SBN-member volunteer workers will add more custom touches, such as quilted suede seats and Rosegold chrome accents throughout the exterior and interior. They will also make modifications to the engine, undercarriage, drivetrain and sound system. When the process is complete, the car will come back to L&G for the exterior paint work.

The SBN vehicle build task force is comprised of Task Force Chair Rose Kawasaki (Exports International), Project Vehicle Coordinator Sherry Kollien (Ford Motor Co.), Assembly Coordinator Kellie Colf (Colf Creative Resources), PR/Media Coordinator Camee Edelbrock (Schiefer Media Inc.) and Product Coordinator Susan Carpenter (JR Products). Advisors include Mike Spagnola (Street Scene Equipment), Joel Ayres (Bedslide/Takit) and Marla Moore (Hypertech).

To learn more about the SEMA Mustang Build Powered by Women, visit www.SEMA.org/SEMAmustangbuild, or contact Bryan Harrison, SEMA's senior manager of councils and the build's project manager at bryanh@sema.org. 

Are you on Facebook, LinkedIn or Twitter? SBN is!

Be sure to follow SBN on all of your favorite social networking sites. To find these sites, go to www.sema.org/sbn and use the links in the top right-hand corner.

SBN Column in SEMA Member News

Read SBN's column featured in the July/August issue of SEMA Member News.

For information about SBN, contact Bryan Harrison.

Back to Top


SPC Logo
 
Visit SPC's website.  
Are you on Facebook, LinkedIn or Twitter? SPC is!

Be sure to follow SPC on all of your favorite social networking sites. To find these sites, go to www.sema.org/spc and use the links in the top right-hand corner.

SPC Column in SEMA Member News

Read SPC's column featured in the July/August issue of SEMA Member News.

For information about SPC, contact Bryan Harrison.

Back to Top

WTC Logo
 
Visit WTC's website

Are you on Facebook, LinkedIn or Twitter? WTC is!

Be sure to follow WTC on all of your favorite social networking sites. To find these sites, go to www.sema.org/wtc and use the links in the top right-hand corner.

WTC Column in SEMA Member News

Read WTC's column featured in the July/August issue of SEMA Member News.

For information about WTC and how to join, contact Zane Clark or call or 909/978-6696.

Back to Top

YEN Logo

Visit YEN's website

YEN Member Wins iPad for Autistic Son for Membership Initiative Participation

It’s almost noon on a Thursday and I’m driving through rural Oklahoma when my cell phone rings. I look at the screen, which displays the name Bryan Harrison, SEMA's senior manager of councils. Not totally out of the ordinary since I serve on the YEN Select Committee, but I knew we didn’t have a call scheduled for the day. When I answered, he proceeded to congratulate me on winning an iPad for my participation in our YEN membership initiative in which we collectively increased our membership to more than 1,000. We chatted briefly about work and the current state of the industry as a whole and he signed off by saying something along the lines of, “hopefully this brightened your day.” Bryan likely had no idea just how much those words would ring true.

If you’ve met me, you know I’m an outgoing cut-up who doesn’t take things too seriously, but what you may not know about me is that I have a 10-year-old son named Jake who has Asperger’s Syndrome—a high-functioning form of autism. In meeting Jake, he comes off as your average 10-year-old who shares my passion for all things automotive and loves Star Wars and superheroes. But to live with him is to know the constant struggles Jake faces to navigate through daily tasks and situations that most would deem routine.

It should come as no surprise that Jake’s greatest challenges occur in the classroom, and that is why he spends upwards of 10 hours per week working with an occupational therapist on everything from handwriting to how to interact with peers in social situations. This past year, our school district received a grant to purchase a few iPads for the occupational therapy department after recent studies had shown that autistic children responded very well to the touch-screen interaction. My wife and I had been tossing around the idea of purchasing one for Jake at the time that I received the phone call from Bryan. Little did he know, he was not just brightening my day, but brightening Jake's life.

Research has shown that individuals with Asperger’s can go on to lead very normal, fulfilling lives. If you Google “Famous people with Asperger’s,” it will provide you with a surprising list of people, such as Bill Gates and filmmaker Tim Burton, along with suspected historical cases, such as Abe Lincoln, Andy Warhol and Albert Einstein. Even more surprising is the number of children currently born with some form of autism. One in 88 has become the medically recognized statistic of the current rate of children born with autism. With numbers like that, chances are you or somebody you know has some sort of link to autism and, if so, I’d like to hear from you. My e-mail is listed below this article. My 1 in 88, Jake and I would like to say thank you to Bryan Harrison and SEMA for the iPad as it means much more to him than you could ever imagine.

Matt Reasoner
Regional sales manager, BedRug Inc.
YEN Select Committee Member
mreasoner@bedrug.com

YEN Member of the Month Spotlight

Did you know that YEN has a Member of the Month Spotlight on the SEMA website and that anyone can be nominated? To view previous selections or to make a nomination, visit www.sema.org/yen.

Are you on Facebook, LinkedIn or Twitter? YEN is!

Be sure to follow YEN on all of your favorite social networking sites. To find these sites, go to www.sema.org/yen and use the links in the top right-hand corner.

YEN Column in SEMA Member News

Read YEN's column featured in the July/August issue of SEMA Member News.

For information about YEN, contact Bryan Harrison.

Back to Top

Join the SEMA Council Family

SEMA hosts 10 distinct councils and committees that represent focused niches within the specialty-equipment industry. These groups are comprised of elected volunteers (Select Committee) who guide and direct council activities while representing the membership at large. Although each council acts independently and represents a different segment, they are all focused on the betterment of the industry as a whole.

The value councils provide SEMA and the industry is beyond refute. It is inspiring to witness a diverse collection of company representatives, many of which are direct competitors, come together and develop educational, training, youth awareness and networking events that are, at the core, designed to give back and promote business. An equally important council function is to ensure that SEMA sustains a pulse on the industry and maintains a presence with its members.

The question is often asked, “Why should my company join a council?” The answer is simple. SEMA councils open the doors and provide you exposure to industry leaders, decision makers, trendsetters and a community of like-minded individuals who share your passion and desire to see business succeed and prosper. Once the doors are open, it is your responsibility to take advantage of the benefits by becoming actively involved.

Learn more today.