Thu, 01/15/2009 - 00:00


Click on the logo to visit MPMC's website.

MPMC Long-Range Planning Meeting

The annual MPMC Long-Range Planning Meeting will be held on Friday, January 23, from 9:00 a.m.–12:00 p.m., at the Embassy Suites LAX South in El Segundo, California, which is the site of the MPMC Media Trade Conference.

“We always have the meeting on the Friday following the Media Trade Conference,” said MPMC Chairman Bill Floyd. “The 100 member companies who exhibit at the conference only need an extra night’s hotel stay to participate in the meeting, and attendance is always very good. We include a review of the conference in the agenda, so we get quite a lot of work done every year. It’s always a productive meeting.”

Anyone interested in attending should RSVP with Jim Skelly at jimsk@sema.org.

Media Trade Conference Set

The annual MPMC Media Trade Conference is set to kick off on Tuesday, January 20. This annual event brings 100 MPMC-member manufacturers together with upwards of 200 media representatives for three days of face-to-face meetings. Unlike other trade events, the meetings are dedicated to providing and gathering editorial content. Ad sales are prohibited from the meeting agendas. A possible 42, half-hour long meetings are scheduled over the three-day event, and many media report that they get a full 12 months' worth of technical material at this single event.

“We really want to thank all the participants at this year’s event,” said MPMC Chairman Bill Floyd. “No one has to mention the economic crunch we are all feeling. To have so many exhibitors and media committed to the Media Trade Conference is an indicator of the importance of the event itself and the dedication of our members and the media. A heartfelt thank you from MPMC to everyone involved.”
 

MPMC Column in SEMA Member News

 

Read MPMC's column featured in the January/February issue of SEMA Member News by clicking here.

 

For information about MPMC, contact Jim Skelly at jimsk@sema.org.

______________________________________________________________________________________


Click on the logo to visit ARMO's website.

ARMO Long-Range Planning Meeting


The annual ARMO Long-Range Planning Meeting is scheduled during Auction Week in Scottsdale, Arizona, on Friday, January 16, at the Resort Suites of Scottsdale. The open general membership session will be held 8:00 a.m.–12:00 p.m. This meeting is the most important council meeting members could attend.

In addition to networking with peers, each ARMO member has the opportunity to participate in setting the agenda for ARMO’s future. Members are encouraged to attend, participate and take an active part in our industry. For more details and to make your reservation, contact Jan Desma at jand@sema.org.

ARMO Needs You

ARMO's strength and success depends on industry support. The ARMO Select Committee recently mailed out nomination forms for the ARMO Select Committee election and is asking you to identify the restoration industry's most talented leaders and nominate them for a seat on the ARMO Select Committee.

Please review the nomination form by clicking here, and tell us about a potential nominee and their leadership background. Self-nominations are also welcome. When filling out the nomination forms, often the best background and experience information comes from the source.

Nominations are due Friday, February 20. Please direct questions and submit forms to Jan Desma at jand@sema.org.

Attention ARMO Members Attending the Hotrod & Restoration Show

The Hotrod & Restoration Trade Show in Indianapolis from March 12–14, is a definite “don’t miss” event. Not only is this one of the greatest trade shows for our niche industry, but there are several educational and networking opportunities in store for ARMO members:

  • Exhibitors of the Hotrod & Restoration Trade Show can sign up to host a workshop/seminar during the Hot Rod Industry Alliance’s (HRIA) Education Day on Thursday, March 12. This is a wonderful opportunity to share your knowledge and expertise with attendees during your own one-hour session. Click here for details.
  • All ARMO members are invited to attend a networking mixer hosted by the Young Executives Network (YEN) at The Ram Restaurant & Brewery, 140 S. Illinois St., from 6:00 p.m.–8:00 p.m. Mix, mingle and meet new and old industry friends.
  • Saturday, March 14, at 9:00 a.m., ARMO is hosting a seminar on "10 Things You Can Do Today to Improve Your Website Results Tomorrow" by Brian Offenberger.  

ARMO Column in SEMA Member News

 

Read ARMO's column featured in the January/February issue of SEMA Member News by clicking here.
______________________________________________________________________________________



Click on the logo to visit HRIA's website.


HRIA Education Day at HRR Show

A record number of manufacturers are on the slate to present seminars and workshops at the Hotrod & Restoration Trade Show in Indianapolis, on March 12–14. Education Day, scheduled for March 12, provides a unique opportunity for manufacturers to discuss their products in great detail, focusing on the technical aspects, zeroing in on sales strategies and providing you the knowledge necessary to increase your bottom line. With only a handful of time slots remaining, sign up today to talk about your products, or join the more than 1,000 attendees learning how to make their businesses stronger and more profitable. Visit www.hotrodshow.com for a complete list of exhibitors or to learn how to be a part of this exciting and rewarding experience.
 

HRIA Column in SEMA Member News

 

Read HRIA's column featured in the January/February issue of SEMA Member News by clicking here.

 

For more information about HRIA, contact Jan Desma at jand@sema.org.

______________________________________________________________________________________

 


Click on the logo to visit TORA's website.


George Lathouris named TORA Chair-Elect


The TORA Select Committee has named Keystone’s George Lathouris as its chair-elect. Lathouris will assume his new responsibilities on July 1, when Kelly Kneifl assumes the duties of chairman from current Chairman Ron DiVincenzo. Congratulations to George!


TORA Column in SEMA Member News

 

Read TORA's column featured in the January/February issue of SEMA Member News by clicking here.


For more information about TORA, contact Jim Skelly at jimsk@sema.org.

______________________________________________________________________________________



Click on the logo to visit MRC's website.


Manufacturers Seeking Rep List Now Available

Manufacturers’ representatives are encouraged to contact Staci Bostock at stacib@sema.org to request the Manufacturers Seeking Rep List, which is available at no cost. Compiled using information collected from manufacturers prior to the 2008 SEMA Show, the listing contains details on manufacturers currently seeking the services of manufacturers’ representatives along with the lines available and company contact information. The list was originally available in the MRC Rep Center during the week of the 2008 SEMA Show.

 

MRC Column in SEMA Member News

 

Read MRC's column featured in the January/February issue of SEMA Member News by clicking here.

 

For information about MRC, contact Staci Bostock at stacib@sema.org. 

______________________________________________________________________________________



Click on the logo to visit PRO's website.

 

PRO Business Development Guidebook Now On Sale


In today’s ever-changing marketplace, staying ahead of the competition is more important and challenging than ever. To be successful, you not only need an effective business strategy, but also the tools and resources to help your company excel and stand out from the pack. The PRO Business Development Guidebook is your handy reference guide.

 

Beginning with an overview of the importance of having a business plan—including tips on how to develop a business plan and the many purposes it can serve—the manual offers chapter-by-chapter strategies for making your business a success.


From understanding the basics of business finance and the importance of quality and service and how to make them hallmarks of your business, to building knowledge and skills among your employees to branding your restyling business as a market leader, the guidebook offers information critical to the day-to-day and long-term operation of your business.

 

Whether you’re starting your own restyling business or already own one—be it mobile or brick and mortar—you’ll find the answers that you’ve been looking for in the guidebook. PRO Council members contributed much of the information contained in the guidebook, drawing on their experience and knowledge to present a valuable business tool.


Click here to download the business guidebook order form, or contact Jim Skelly at jimsk@sema.org.

 

PRO Column in SEMA Member News


Read PRO's column featured in the January/February issue of SEMA Member News by clicking here.

 

For information about PRO, contact Jim Skelly at jimsk@sema.org.

______________________________________________________________________________________

 


Click on the logo to visit SPC's website.

 

SPC Long-Range Planning Meeting

 

The SPC Long-Range Planning Meeting is scheduled for Monday, January 19, at the Embassy Suites Hotel in El Segundo, California. The session will be held at 10:00 a.m. The meeting is being held at the location of the Motorsports Parts Manufacturers Council (MPMC) Media Trade Conference.

RSVP for the meeting by Friday, January 16, to Paul Moritz at 909/396-0289, ext. 112, or e-mail paulm@sema.org.


SPC Column in SEMA Member News


Read SPC's column featured in the January/February issue of SEMA Member News by clicking here.


For information about SPC, contact Paul Moritz at paulm@sema.org.

______________________________________________________________________________________



Click on the logo to visit WTC's website.

 

WTC Column in SEMA Member News

 

Read WTC's column featured in the January/February issue of SEMA Member News by clicking here.

For information about WTC, contact Paul Moritz at paulm@sema.org. 

______________________________________________________________________________________

 


Click on the logo to visit SBN's website.


Discover the SEMA Mentoring Program—Powered by the SBN


“I’ll get by with a little help from my friends…” - Joe Cocker

Everyone needs help or expert advice from time to time, and SEMA’s Mentoring Program is an excellent resource to get answers to all your questions. Whether you need to know more about SEMA, market information for a start-up company or advice on how to approach your boss about a new position, the SEMA Mentoring Program can help.

“Ask A Mentor” is perfect for one-time questions. You can expect multiple SEMA mentors to provide online guidance and answers to your industry-related questions.

Short-term Assistance/Guidance is for help with a specific project or task. A SEMA council/committee mentor with the expertise you seek will be paired up with you to provide guidance with your project.

Long-term Relationship is helpful for developing your professional career.  In this program segment you will be paired with a SEMA council/committee mentor who will provide guidance and assistance for ongoing career development or a long-term project.

So whether you just need an answer to a question or you want to cultivate a mentoring friendship, the SEMA Mentoring Program—Powered by the SBN is available to help. After all, we can all use a little help from our friends.

 

For more information on the program, click here.

 

SBN Column in SEMA Member News

Read SBN's column featured in the January/February issue of SEMA Member News by clicking here.

For information about SBN, contact Jan Desma at jand@sema.org.

______________________________________________________________________________________

 


Click on the logo to visit YEN's website.

 

YEN Mixer

 

The YEN Mixer at the MPMC Media Trade Conference is scheduled for Wednesday, January 21, at Capistrano’s Lounge in the Embassy Suites Hotel in El Segundo, California. The mixer will be held from 6:00 p.m.–8:00 p.m.
 
For more information, contact Paul Moritz at 909/396-0289, ext. 112, or e-mail paulm@sema.org.


Join YEN

 

Did you know that the SEMA Young Executives Network has more than 500 members networking in the industry and is the largest SEMA committee? If you are employed by a SEMA-member company and are under the age of 39, then you can join the SEMA Young Executives Network for FREE. If you are interested in becoming part of the team, please visit our website at www.sema.org/yen.

 

YEN Member of the Month Spotlight

 

Did you know that YEN has a Member of the Month Spotlight on the SEMA website and that anyone can be nominated? To view previous selections or to make a nomination, visit www.sema.org/yen.

 

Discover The SEMA Mentoring Program—Powered by the SBN

 

“I’ll get by with a little help from my friends…” - Joe Cocker

 

Everyone needs help or expert advice from time to time, and SEMA’s Mentoring Program is an excellent resource to get answers to all your questions. Whether you need to know more about SEMA, market information for a start-up company or advice on how to approach your boss about a new position, the SEMA Mentoring Program can help.

 

“Ask A Mentor” is perfect for one-time questions. You can expect multiple SEMA mentors to provide online guidance and answers to your industry-related questions.

 

Short-term Assistance/Guidance is for help with a specific project or task. A SEMA council/committee mentor with the expertise you seek will be paired up with you to provide guidance with your project.

 

Long-term Relationship is helpful for developing your professional career.  In this program segment you will be paired with a SEMA council/committee mentor who will provide guidance and assistance for ongoing career development or a long-term project.

 

So whether you just need an answer to a question or you want to cultivate a mentoring friendship, the SEMA Mentoring Program—Powered by the SBN is available to help. After all, we can all use a little help from our friends.

For more information on the program, click here.

YEN Column in SEMA Member News

Read YEN's column featured in the January/February issue of SEMA Member News by clicking here.

For information about YEN, contact Paul Moritz at paulm@sema.org. 

Thu, 01/15/2009 - 00:00

Filler for eNews

Thu, 01/15/2009 - 00:00

Dates and locations for several upcoming SEMA-sponsored shows and activities have been announced. Details are:

SEMA Webinar, "The Specialty-Equipment Automotive Company of the Future: Guideposts for Strategic Planning (Phase I)," January 15, 2009, 10:00 a.m. (PST)

SEMA MPMC Media Trade Conference, January 20–22, 2009, El Segundo, California

 

SEMA Webinar, "Social Media: A New Way to Take Your Business to the Top," January 22, 2009, 10:00 a.m. (PST)


SEMA Webinar, "Business Efficiency 101: Using Product Information to Increase Sales, Boost Image and Reduce Costs," February 5, 2009, 10:00 a.m. (PST)

 

SEMA Webinar, "Job Costing Systems That Will Boost Your Cash Flow," February 19, 2009, 10:00 a.m. (PST)


SEMA Webinar, "Increase Profitability With Fewer Customers," March 12, 2009, 10:00 a.m. (PST)

 

SEMA Webinar, "Change Management," April 9, 2009, 10:00 a.m. (PST)

 

SEMA Webinar, "Contract Law 101: Sponsored by SEMA SPC," May 7, 2009 (PST)

 

SEMA Webinar, "Sales and Marketing Strategies Guaranteed to Make SEMA '09 a Success," June 11, 2009, 10:00 a.m. (PST)

 

SEMA Webinar, "An Interactive Discussion on Selling Online," June 25, 2009, 10:00 a.m. (PST)

 

Aftermarket eForum, July 13–15, 2009, Chicago, Illinois


PAACE Automechanika Mexico, July 15–17, 2009, Mexico City

 

SEMA Webinar, "Introduction to Internet Marketing," July 16, 2009, 10:00 a.m. (PST)

 

SEMA Webinar, "Internet Marketing Tools," August 6, 2009, 10:00 a.m. (PST)

 

SEMA Webinar, "25 Ways to be Successful at the SEMA Show," August 20, 2009 (PST)


SEMA Webinar, "Basics of Website Design and Content," September 24, 2009

 

SEMA Show, November 3–6, 2009, Las Vegas, Nevada

For association-related travel, contact Manya Petropaki (manya.p@travelstoreusa.com) at Travel Store USA, 949/930-9268.

Looking for Some Extra Publicity for Your Industry Event?
Publicize your events through the SEMA Online Calendar of Events located at www.sema.org/calendar. The calendar is stocked with information on events taking place throughout the year, broken down by month. Examples of events featured in the calendar include consumer shows and club events, educational and training workshops, conventions and trade shows, races and more.

To submit your event details for the calendar, e-mail company name and the date(s), location and name of the event to Shirley Presecan at shirleyp@sema.org.

Thu, 01/15/2009 - 00:00


Hummer sales suffered a 50% decline in 2008 compared to 2007 levels as consumers turned away from trucks, SUVs and large family sedans.

Looking for ways to reduce costs in 2009, automakers are trimming model offerings and canceling concepts and near-production concepts. Pontiac recently axed its G8 ST sport truck concept, while Honda canceled plans for a 2010 S2000.

Light-truck production schedules have also been cut and factories idled. Ford shut down its Michigan Truck Plant in late 2008 for retooling and also plans the closure of plants in Kentucky, Minnesota and Mexico in a shift away from trucks and SUVs to small cars like the Fiesta and Focus.

Compounding the automaker’s troubles are miserable sales (down 18% in 2008 from 2007, according to Ward’s Auto) and a squeeze on consumer credit. The credit market shows some signs of thaw—General Motors’ financial arm GMAC recently received direct government funding, and CNW Research notes that 81% of prime new-vehicle loans were approved—but consumers have shifted their focus.


The vehicles bought and sold in 2008 may have a direct impact on performance parts and accessory manufacturers. Some brands may not survive 2009, or at least with the same ownership. AutoPacific reports that Saab, Volvo, Saturn and Hummer have very uncertain futures.

Hummer in particular has been hit hard. Sales are down more than 50% from 2007 to 2008. Hummer accessory parts have followed suit; in 2005, manufacturers entered 14 new Hummer parts in the SEMA Show New Products Showcase. In 2008, that number shrank to four.  



This isn’t to say trucks are done. Nissan’s Titan was up 108% and Chevy’s Silverado was up 13% in December, although both offered substantial incentives.

As the mix of vehicles on the road shift towards smaller, more frugal vehicles, we can expect to see similar shifts in the specialty-equipment industry.



For more original market research, visit www.sema.org/research.

Thu, 01/15/2009 - 00:00


Chevrolet’s Corvette has been a perennial favorite among gearheads for more than half a century. From classic models to modern editions, enthusiasts continue to search for the latest high-performance and restyling products for this iconic sports car.

SEMA Show exhibitors brought 30 customized examples of the classic coupe to the 2008 SEMA Show, and 58 Corvette-specific products have been displayed during the past four shows. Registration data from Experian Automotive shows that nearly 750,000 Vettes, ranging from 1967–2009 models, are scattered throughout the United States, with heavy concentrations in California, Florida, Texas, New York, Illinois, Michigan and Ohio.



SEMA research periodically profiles owners of vehicles when a significant amount of information can be obtained for a specific model, demographic or other notable characteristic. These sample groups often paint an accurate portrait of the remaining body of owners in that automotive profile. In this case, submissions from the latest Automotive Lifestyles Survey catalog a detailed snapshot of Corvette owners.


Responses to the survey include both vehicle and lifestyle data. Corvette owners are passionate about customizing and presenting their vehicles and the automotive lifestyle; 87% claimed to have purchased a custom part or accessory within the past 12 months. Compared with other sports car owners, Corvette enthusiasts are more likely to purchase accessories and electronics (perhaps due to the car’s inherent athletic ability from the factory).

The top product purchased, by roughly nine out of 10 people, were automotive polishes/waxes, followed by exhaust upgrades (54.6%). Nearly half of the top 25 products that Vette enthusiasts purchase are performance-related, including intakes, brake upgrades and performance tires. 

One in four Corvette owners modify their engine control systems, valvetrains and electrical systems, while the most popular accessories include floor mats, license plate frames and alarm systems. Corvette owners who make purchases of specialty equipment often do so within a short span of time after obtaining the vehicle. 



Nearly seven out of 10 (69%) owners surveyed made their first purchase during the first two months of ownership. And split nearly in half, Vette owners buy from both traditional brick-and-mortar outlets, including from mail order, installers and at shows, while 51% purchase from Internet retail. 

Other demographic data on Corvette owners includes:

 

For more original market research, visit www.sema.org/research.

Thu, 01/15/2009 - 00:00


The Dodge Ram was one of AutoTrader.com's most-researched vehicles in the last months of 2008.

Trucks and SUVs aren’t completely off consumers' radars, particularly now that gas prices have fallen to sub-$2 levels.

AutoTrader.com reports an increase in searches for pickups, certain SUVs and family sedans from October to the end of the year. In December, the most-researched vehicles included the Ford F-150 (+23%) and Dodge Ram (+43%).

The Honda Pilot, Odyssey and Accord and Chevrolet Impala also saw increased interest as consumers investigated dealership inventories. Despite slumping new-car sales, online traffic suggests that consumers are delaying purchases but continuing to window shop. These factors could signal a significant pent-up demand for the near-term.

Prices for these types of vehicles have been lower than traditional values due to saturated supplies and diminished demand. Dealerships have increased their incentive programs and cut prices on new vehicles to reel in customers, driving down the price of used vehicles in the process.

Additionally, used-vehicle dealerships are facing the same economic characteristics and have felt the pressure to lower prices. Shoppers have become less impulsive about new-vehicle purchases and are looking for pre-owned options.

Shoppers are also increasingly looking to American options in their car purchases. A new Kelley Blue Book (KBB) study indicates that American consumers are growing more aware of the perils of domestic automobile manufacturers and concerned for their survival.

KBB asked consumers about their preferences for country of origin in the products they buy. For general purchases, three out of four shoppers claimed to prefer American-made products.

Over half (51%) of the respondents try to source American-made products if the items are competitive, while 14% are willing to endure inconvenience for American products. Six percent shop exclusively for domestic items.

Buyers have similar patriotic sentiments when vehicle shopping. Among consumers to whom country of origin is a key concern, 33% preferred American manufacturers. Twelve percent preferred Japanese cars, while 5% opted for German engineering.

While these sentiments reflect only a fraction of those surveyed, nearly 90% of all respondents have a domestic vehicle on their list of considerations.

For more original market research, visit www.sema.org/research.

Thu, 01/15/2009 - 00:00

A recent survey of global senior automotive executives by accounting and consulting firm KPMG reveals conservative expectations for the industry’s growth in 2009.

Executives remain poised to curtail spending and lean their operations. They are still generally committed to alternative-fuel technologies, however. More precisely, the survey indicated that executives and product planners have a growing optimism for the consumer-lead demand for fuel-efficiency and alternative fuels.

Roughly nine out of 10 (91%) considered hybrid systems the “most important innovation in coming years.” Confidence in electric-propulsion systems also grew dramatically, up to 82% from 60% in 2007.

For the 10th consecutive year, KPMG has surveyed senior representatives at vehicle manufacturers and top-tier suppliers from around the world. The 2009 edition collected opinions from 200 executives and speaks volumes for the complexity and sensitivity of the challenges facing the automotive industry.

The previous survey issued a sense of optimism and momentum for 2008, but those expectations were dashed by a global economic meltdown.

On the whole, the general attitude for 2009 is more conservative. Companies expect lower revenues while maintaining a commitment to technological advancement and higher product quality, thus reducing profits. They also foresee additional bankruptcies and a series of lengthy efforts to restructure throughout the supply chain.

In Detroit, the conduct of automakers at the 2009 North American International Auto Show (NAIAS) marks changes impacting the specialty-equipment industry. Not only have some manufacturers decided to opt-out of press conferences, but some have foregone the show entirely.

Most cite financial reasons and budget cuts, but others admit they have little to announce. The vehicles and technologies represented by both the KPMG findings and what is on display at NAIAS, however, are important to the specialty-equipment industry.

Chevrolet will unveil the production version of the compact Beat and smart will show its electric fortwo. Both models were never intended for sale in the United States, but that may change with increased Corporate Average Fuel Economy (CAFE) and safety standards.

For the second consecutive year, executives expressed their intention to invest in new models and products. Ninety-one percent (91%) said investment will increase in the coming two years.

Coincidently, they also aim to reduce overall costs by reducing marketing and advertising budgets, postponing the expansion of new facilities and aggressively building on cross-share platforms and components.



As a sign of things to come, crossover vehicles supplant the need for large SUVs and share their underpinnings from other models. The new Lexus HS 250h will adopt the platform and drivetrain of the Toyota Prius.

The second-generations of the Cadillac SRX and Chevrolet Equinox will shrink down to the GM Theta platform, the Lincoln MKT will sit atop a shared platform with the Ford Flex and the MINI Crossman borrows from the BMW X1.

For more original market research, visit www.sema.org/research.

Thu, 01/08/2009 - 00:00

 

 

Thu, 01/08/2009 - 00:00

The elections are over, and Congress intends to make changes to a health care system that has left 27 million small-business owners, employees and dependents without insurance. SEMA is working on Capitol Hill to find answers, but we also need your feedback on possible solutions. 

SEMA urges you to take an electronic survey on options for improving access to health care coverage.

Click Here 

It takes only a few minutes to complete. All responses must be received by Friday, January 30.

  • Should employer-based health care remain the model for coverage?
  • What are the best ways to reduce premium costs but maintain high quality?
  • What tax incentives would help small businesses provide affordable coverage to workers?

The following survey will assist SEMA as it presses lawmakers to deliver health care solutions for our members. We need your guidance on a number of key issues that will affect your business, so your response is important.

Thu, 01/08/2009 - 00:00

The rapidly developing arena of vehicle communications and connected-vehicle technology offers important opportunities for SEMA-member companies. The Specialty-Equipment Automotive Company of the Future: Guideposts for Strategic Planning (Phase I) study prepared by the Center for Automotive Research (CAR), investigates trends in the connected-vehicle space through several methods: A survey of technology experts from the automotive and telematics sectors; interviews with connected-vehicle experts from the automotive industry and beyond; participation in connected vehicle forums; and participation in meetings with federal- and state-level officials.

The study identifies technology trends that are significant for members to keep in mind, since the products offered by members may help accelerate the deployment of this technology and help it reach a critical mass.

From these different sources of information, CAR identified the following trends that will affect SEMA members:

  • The future of vehicle communications includes multiple channels
  • OEM firewalls will limit some options (and create others)
  • On-board connected-vehicle hardware will range from fully embedded to not-at-all embedded
  • Connected-vehicle standards are partially in place and more are needed to spark the market
  • The regulatory environment affecting the connected-vehicle environment is critical and in flux
  • Data are critical (and thus may be lucrative)

“There are significant challenges, but even greater opportunities for SEMA-member companies in developing products and services for connecting drivers with their vehicles, other vehicles and the roadside infrastructure," said John Waraniak, SEMA vice president of vehicle technology.

To gain a detailed look at the identified trends and additional insights from the CAR report, participate in the "The Specialty-Equipment Automotive Company of the Future: Guideposts for Strategic Planning (Phase I)" webinar, presented by Brett Smith, CAR assistant director of the manufacturing, engineering and technology group, and Richard Wallace, CAR senior project manager.

“Specialty-equipment market companies will play a key role in accelerating the commercialization, deployment and acceptance of connected vehicle and alternative powertrain technologies,” said Waraniak. “Technology and innovation are the future of SEMA.”

Both Smith and Wallace authored the CAR study and will present findings from the report. Waraniak will moderate the session. The webinar is scheduled for Thursday, January 15, 2009, from 10:00 a.m.–11:00 a.m. (PST).

To register for this webinar, click here.