By SEMA Washington, D.C., Staff

Campaign season this year has been forced to take on a unique look as not even the presidential election has been able to escape the ongoing changes of a COVID-world. As our nation copes with this trying time, those running for public office are persevering on the remote campaign trail by holding virtual events instead of traditional in-person appearances. What began with more than a dozen presidential candidates has been narrowed to two: incumbent President Donald Trump, the Republican Party’s nominee, and former Vice President Joe Biden, the Democratic Party's nominee. Not only will Americans choose the nation’s next president, but voters will also elect all 435 members of the U.S. House, 35 U.S. senators, 13 governors and thousands of state and local leaders, too. With the finish line on the horizon, there is no better time to prepare for and fulfill our civic duty as Americans.

Election day will be here quickly. If you are not able to vote in person on November 3, we encourage automotive enthusiasts to vote early or by absentee ballot.  The voter Information tool on the SEMA Action Network (SAN) website provides you with information on your state’s voting dates and deadlines. In advance, find out if your state and federal representatives are affiliated with the hobby-friendly, SEMA-supported caucuses at www.semaSAN.com/StateCaucus and www.semaSAN.com/FederalCaucus. Locate your elected officials under the “Legislators” tab at www.semaSAN.com.  

Why wait? Take action today by planning to vote! On behalf of our industry, take part in our democracy and make your voice heard in November’s election.

By SEMA Washington, D.C., Staff

Campaign season this year has been forced to take on a unique look as not even the presidential election has been able to escape the ongoing changes of a COVID-world. As our nation copes with this trying time, those running for public office are persevering on the remote campaign trail by holding virtual events instead of traditional in-person appearances. What began with more than a dozen presidential candidates has been narrowed to two: incumbent President Donald Trump, the Republican Party’s nominee, and former Vice President Joe Biden, the Democratic Party's nominee. Not only will Americans choose the nation’s next president, but voters will also elect all 435 members of the U.S. House, 35 U.S. senators, 13 governors and thousands of state and local leaders, too. With the finish line on the horizon, there is no better time to prepare for and fulfill our civic duty as Americans.

Election day will be here quickly. If you are not able to vote in person on November 3, we encourage automotive enthusiasts to vote early or by absentee ballot.  The voter Information tool on the SEMA Action Network (SAN) website provides you with information on your state’s voting dates and deadlines. In advance, find out if your state and federal representatives are affiliated with the hobby-friendly, SEMA-supported caucuses at www.semaSAN.com/StateCaucus and www.semaSAN.com/FederalCaucus. Locate your elected officials under the “Legislators” tab at www.semaSAN.com.  

Why wait? Take action today by planning to vote! On behalf of our industry, take part in our democracy and make your voice heard in November’s election.

By SEMA Washington, D.C., Staff

Campaign season this year has been forced to take on a unique look as not even the presidential election has been able to escape the ongoing changes of a COVID-world. As our nation copes with this trying time, those running for public office are persevering on the remote campaign trail by holding virtual events instead of traditional in-person appearances. What began with more than a dozen presidential candidates has been narrowed to two: incumbent President Donald Trump, the Republican Party’s nominee, and former Vice President Joe Biden, the Democratic Party's nominee. Not only will Americans choose the nation’s next president, but voters will also elect all 435 members of the U.S. House, 35 U.S. senators, 13 governors and thousands of state and local leaders, too. With the finish line on the horizon, there is no better time to prepare for and fulfill our civic duty as Americans.

Election day will be here quickly. If you are not able to vote in person on November 3, we encourage automotive enthusiasts to vote early or by absentee ballot.  The voter Information tool on the SEMA Action Network (SAN) website provides you with information on your state’s voting dates and deadlines. In advance, find out if your state and federal representatives are affiliated with the hobby-friendly, SEMA-supported caucuses at www.semaSAN.com/StateCaucus and www.semaSAN.com/FederalCaucus. Locate your elected officials under the “Legislators” tab at www.semaSAN.com.  

Why wait? Take action today by planning to vote! On behalf of our industry, take part in our democracy and make your voice heard in November’s election.

By SEMA Washington, D.C., Staff

Campaign season this year has been forced to take on a unique look as not even the presidential election has been able to escape the ongoing changes of a COVID-world. As our nation copes with this trying time, those running for public office are persevering on the remote campaign trail by holding virtual events instead of traditional in-person appearances. What began with more than a dozen presidential candidates has been narrowed to two: incumbent President Donald Trump, the Republican Party’s nominee, and former Vice President Joe Biden, the Democratic Party's nominee. Not only will Americans choose the nation’s next president, but voters will also elect all 435 members of the U.S. House, 35 U.S. senators, 13 governors and thousands of state and local leaders, too. With the finish line on the horizon, there is no better time to prepare for and fulfill our civic duty as Americans.

Election day will be here quickly. If you are not able to vote in person on November 3, we encourage automotive enthusiasts to vote early or by absentee ballot.  The voter Information tool on the SEMA Action Network (SAN) website provides you with information on your state’s voting dates and deadlines. In advance, find out if your state and federal representatives are affiliated with the hobby-friendly, SEMA-supported caucuses at www.semaSAN.com/StateCaucus and www.semaSAN.com/FederalCaucus. Locate your elected officials under the “Legislators” tab at www.semaSAN.com.  

Why wait? Take action today by planning to vote! On behalf of our industry, take part in our democracy and make your voice heard in November’s election.

By SEMA Washington, D.C., Staff

California Governor Gavin Newsom issued a controversial Executive Order this week instructing the California Air Resources Board (CARB) to draft regulations requiring that all new cars and passenger trucks sold in the state be zero-emissions by 2035.

Once drafted, CARB’s proposed regulations will be subject to a lengthy regulatory process, including legal, economic, and environmental analyses, public comment and hearings. The Governor’s order is also expected to face numerous legal challenges from opponents.

“SEMA is deeply disappointed in Governor Newsom’s decision to escalate his ongoing feud with the Trump Administration at the expense of the consumer and California’s small businesses,” said Daniel Ingber, SEMA vice president of government and legal affairs. “SEMA will work with the industry and enthusiasts in opposing the Governor’s proposal on all fronts.”

According to the California Energy Commission, zero-emission vehicles (ZEVs) currently make up approximately 2% of the over 28-million vehicles in use in the Golden State. It is estimated that at least 8% of new vehicle sales in California will be ZEVs and plug-in hybrids by 2025.

California’s ZEV program falls within the state’s greenhouse gas rule that is being challenged in court by the Trump Administration. The federal government is seeking to withdraw EPA recognition of the California rule under the Clean Air Act because it effectively establishes fuel economy standards, which are the sole jurisdiction of the federal government. The challenge could eventually be decided by the Supreme Court.

By SEMA Washington, D.C., Staff

California Governor Gavin Newsom issued a controversial Executive Order this week instructing the California Air Resources Board (CARB) to draft regulations requiring that all new cars and passenger trucks sold in the state be zero-emissions by 2035.

Once drafted, CARB’s proposed regulations will be subject to a lengthy regulatory process, including legal, economic, and environmental analyses, public comment and hearings. The Governor’s order is also expected to face numerous legal challenges from opponents.

“SEMA is deeply disappointed in Governor Newsom’s decision to escalate his ongoing feud with the Trump Administration at the expense of the consumer and California’s small businesses,” said Daniel Ingber, SEMA vice president of government and legal affairs. “SEMA will work with the industry and enthusiasts in opposing the Governor’s proposal on all fronts.”

According to the California Energy Commission, zero-emission vehicles (ZEVs) currently make up approximately 2% of the over 28-million vehicles in use in the Golden State. It is estimated that at least 8% of new vehicle sales in California will be ZEVs and plug-in hybrids by 2025.

California’s ZEV program falls within the state’s greenhouse gas rule that is being challenged in court by the Trump Administration. The federal government is seeking to withdraw EPA recognition of the California rule under the Clean Air Act because it effectively establishes fuel economy standards, which are the sole jurisdiction of the federal government. The challenge could eventually be decided by the Supreme Court.

By SEMA Washington, D.C., Staff

California Governor Gavin Newsom issued a controversial Executive Order this week instructing the California Air Resources Board (CARB) to draft regulations requiring that all new cars and passenger trucks sold in the state be zero-emissions by 2035.

Once drafted, CARB’s proposed regulations will be subject to a lengthy regulatory process, including legal, economic, and environmental analyses, public comment and hearings. The Governor’s order is also expected to face numerous legal challenges from opponents.

“SEMA is deeply disappointed in Governor Newsom’s decision to escalate his ongoing feud with the Trump Administration at the expense of the consumer and California’s small businesses,” said Daniel Ingber, SEMA vice president of government and legal affairs. “SEMA will work with the industry and enthusiasts in opposing the Governor’s proposal on all fronts.”

According to the California Energy Commission, zero-emission vehicles (ZEVs) currently make up approximately 2% of the over 28-million vehicles in use in the Golden State. It is estimated that at least 8% of new vehicle sales in California will be ZEVs and plug-in hybrids by 2025.

California’s ZEV program falls within the state’s greenhouse gas rule that is being challenged in court by the Trump Administration. The federal government is seeking to withdraw EPA recognition of the California rule under the Clean Air Act because it effectively establishes fuel economy standards, which are the sole jurisdiction of the federal government. The challenge could eventually be decided by the Supreme Court.

Compiled by SEMA Editors

NAIAS Moves Reimagined Show to September 2021 and Beyond

The North American International Auto Show (NAIAS) has announced it will move its reimagined indoor and outdoor show, originally planned for summer 2021, to September 28–October 9, 2021. NAIAS officials say the show is teed up to be a global powerhouse of current product and next-generation mobility combined with immersive brand activations and product engagement for both the international media and the public.

NAIAS will remain a fall show going forward after the inaugural event in September 2021. Show dates have already been secured with TCF Center for the next three years. NAIAS organizers secured dates towards the end of the month, in part, to be mindful of the new IAA in Munich, which is scheduled for the first full week in September.

NAIAS officials also plan to expand the show’s marketing reach, drawing additional show visitors from beyond the region and state. The campaign will emphasize that consumers can preview all of the latest new cars and trucks headed to dealership showrooms while also enjoying Detroit and Michigan in the fall.

The September 2021 show will include the same product experiences that were originally planned for the June show, including dynamic displays and experiential ride-and-drives. The NAIAS campus will include product and technology activations both inside TCF Center and throughout the city.

NAIAS will continue to host seven shows in one: Motor Bella, The Gallery, Press Preview, AutoMobili-D, Industry Preview, Charity Preview and Public Show.

Additionally, NAIAS’ monthly Q’d Up Mobility series will provide a glimpse into what the 2021 show has queued up for guests—an idea that was born out of interest and support after the cancelation of the 2020 show.

AACF Launches Topgolf Tournament November 5

The Automotive Aftermarket Charitable Foundation (AACF) has announced its plans to launch its first Topgolf Top Contender National Championship on November 5, 2020.

AACF board president Lynn Parker said, “When the SEMA and AAPEX trade shows were cancelled in the interest of public safety, AACF made the decision to cancel its largest annual fundraising event, the Bob Schoeberl Memorial Golf Tournament. While this was the right thing to do, we needed to find a way for aftermarket industry employees to connect and have fun as an industry family, and raise funds to assist those in need during this challenging time.”

AACF’s first Topgolf Top Contender National Championship will be an integrated tournament that allows teams to compete in real-time via 60 Topgolf locations throughout North America. The Top Contender format increases the competitive fun, as teams from all locations will compete in real time in the same game. Live leaderboards will be displayed in each time zone starting at 2:00 p.m. (PST) on November 5.

Teams of six players each will compete against other teams to score points by hitting micro-chipped golf balls at giant dartboard-like targets. The more accurate the shot, the more points each team will earn. A national champion will be crowned at the end of the tournament. Deadline for registration is November 3.

Champion Oil has announced a stand-alone blog that aims to become a complete resource center for diesel enthusiasts.

Champion Launches Digital Resource Center for Performance Diesel Enthusiasts

Champion Oil has announced a stand-alone blog that aims to become a complete resource center for diesel enthusiasts. Champion’s new blog aims to establish itself as a vital resource for diesel performance enthusiasts by becoming a hub connecting enthusiasts to other digital platforms, such as diesel forums, press releases, email, websites, RSS feeds and other social-media platforms. The Blue Flame Diesel Blog also has links that provide real-time information on such subjects as diesel fuel prices, truck stop locations, technical information, torque specs, how to become a Champion Oil distributor, real-time crude oil prices, diesel seminars, online purchases and locations where to buy.

Meyer Distributing Opens New Sales Office in Pennsylvania

Meyer Distributing has announced the addition of a Pennsylvania-based office. The new location expands Meyer's inside sales team with the addition of Margaret Edwards, Frank Arvonio, Randy Bowers, Jason Williams, Jack Marchetti and Rich Mackonis.

Kyle Fischer

Lubrication Specialties Inc. Promotes Kyle Fischer to Director of Branding and Promotions
 
Lubrication Specialties Inc. (LSI) President Brett Tennar has announced the immediate promotion of Kyle Fischer to director of branding and promotions. Fischer joined LSI in 2017 as director of marketing followed by a promotion in 2019 to director of sales. He has quickly risen through the ranks taking on increased responsibility and senior leadership roles to build awareness and sales of the company’s performance automotive aftermarket brand—Hot Shot’s Secret. A self-professed gearhead with a passion for anything race related, Fischer has parlayed his 20-plus years of professional experience in the automotive aftermarket to grow the brand to more than 30 performance products for gas and diesel vehicles to reach across multiple markets.

As director of branding and promotions, a newly created position, Fischer will be responsible for working closely with the director of marketing and director of sales to develop positioning for Hot Shot’s Secret-branded products for each market. He will also coordinate and implement promotional activities to select targeted audiences that ensure a consistent brand image. He will have input on all advertising buys, content, social media, race events, brand ambassadors, product content, promotions and trade show activity, and will work closely with the company’s key leadership to increase brand awareness and product sales in the United States and abroad.

Garrett Motion Acquired by KPS Capital Partners

Garrett Motion has entered an agreement for KPS Capital Partners to purchase its business, subject to court approval and customary closing conditions. Garrett also announced the company had launched a debt restructuring process through a Chapter 11 filing with the U.S. Bankruptcy Court in New York. Garrett intends to operate without interruption during the process, according to the company.

Have some company news you would like to share? Let us know and the news may appear in an upcoming issue of SEMA eNews. Send your items for consideration to editors@sema.org.

By SEMA Editors

The SEMA Data Co-op (SDC) is the largest database of specialty market product information.

Manufacturers whose products are shown here have achieved data excellence status by providing the desired product descriptions, digital assets, vehicle fitment and other sales-related facts to make it easy for retailers, jobbers and WDs to create engaging and informative product listings, giving customers confidence in their buying decision.

Products from these and other brands with rich data will be featured in future SEMA eNews issues.

ARIES Universal ActionTrac Mounting Brackets (6-Pack) #3025176 ARIES universal ActionTrac brackets are a custom fabrication solution for installing ARIES ActionTrac powered running boards. Normally, ActionTrac boards are engineered to install with vehicle-specific brackets. However, if vehicle-specific brackets are not available, these universal brackets offer a custom-fab alternative. Provides board-attachment points for custom-fabricated brackets (not included) Designed for custom installation if vehicle-specific brackets are not available Universal wiring kit included for running-board operation Steel bracket construction with black powder-coat finish Custom brackets and boards not included
Crown Automotive Oil Pump Drive Assembly Crown Automotive’s improved Oil Pump Drive Assembly is designed for the '05-'06 TJ Wrangler with 4.0L Engine. The reengineered OPDA moves the seal above the upper bushing, allowing oil to lubricate it. An oil channel was also added to the shaft to increase overall lubrication to the area. The factory OPDA is designed with two oil-impregnated bronze bushings separated by an oil seal. The upper bushing is cut off from lubrication by the seal, resulting in premature failure. Over time, radial movement develops in the shaft. Eventually, the complete assembly and camshaft will fail. A worn OPDA will show symptoms, such as a check engine light or a squeaking noise coming from the OPDA. www.CrownAutomotive.net
CURT Class 4 Trailer Hitch, 2-inch Receiver for 2020 Chevy/GMC HD #14005 The CURT class 4 hitch is a first-to-market receiver hitch for the 2020 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD. It is designed, manufactured and tested in the USA, and it installs with no drilling required. Rated to 10,000 lbs. gross trailer weight and 1,000 lbs. tongue weight Compatible with weight distribution hitch (12,000 lbs. WD / 1,200 lbs. WDTW) Engineered with a vehicle-specific design for a custom fit Tested for safety in accordance with SAE J684 Precisely welded for superior strength and fit Protected by a durable high-gloss black powder coat finish Co-cured in a rust-resistant liquid Bonderite coating Equipped with an open-back receiver for easy cleaning Limited lifetime warranty (one-year finish, one-year parts) Made in USA (may include imported hardware)
FST Performance (Filter Solutions Technologies LLC) RPM350 FlowMax Fuel Filter System Filtering down to 4 microns, water separation, and flowing at 300 gph, the RPM350 FlowMax Fuel Filter System is the complete package and a must in the high contamination (dust, silt, etc.) of off-road racing. With the new high horsepower fuel injected engines and ethanol-based fuels; low micron filtering (2 ½ times or 60% better than most competitors), high flow and water separation are a must. Featuring multiple (2 Inlet and 2 Outlet), -8 ORB/AN ports makes for easy installation and/or options to add accessories like fuel pressure senders. Also, with the spin-on type of filter, it makes for easy & quick changing of the filter; with nothing to clean out which eliminates the chance for fuel system contamination. Visit www.fstperformance.com or call 407-323-0122.
HushMat HushMat Quiet Tape (part#30300) HushMat Quiet Tape (part#30300) is soft pliable closed cell foam tape. Quiet Tape is great for securing wiring to sheet metal, fiberglass, wood or plastic panels, or dash. It also secures harnesses and closes gaps on trim panels too. HushMat Quiet Tape is a single sided foam tape designed to adhere to fabrics, headliner, plastics, and metal with no bleed through. Quiet Tape is reusable. Perfect to use for your car, home, or any project.  Visit www.hushmat.com or call 913-599-2600
Leed Brakes Rear Disc Brake Conversion Kits Rear Disc Brake Conversion Kits are now available from LEED Brakes for '55-'68 General Motors full size cars. Kits include everything needed to mount Leed's 54mm Single Piston Caliper to the GM 10 or 12 bolt rear axle with 5x4.75” wheel bolt pattern. The calipers are also equipped with a built-in parking brake to help keep installation easy. The base kit uses a high-quality, Zinc-plated finish on the calipers to reduce corrosion, extending the life of your brake system. Part Number: RC1007
LUVERNE Black Steel 2" Grille Guard, Compatible with Ford Co-Pilot360 #341724-341725 The LUVERNE grille guard is engineered with Ford’s Co-Pilot360 Technology in mind. It has a shorter profile and mounts closer to the truck, so it will not interfere with the Co-Pilot360™ features, including the Lane-Keeping system and Adaptive Cruise Control with Forward Collision Warning and Brake Support. This ensures that the smart tech your customers invested in for their truck will be fully-functional with the grille guard, maintaining exceptional safety. Contoured horizontal tubes for signature vehicle logo reveal Durable, textured black powder coat finish for lasting corrosion resistance Easy, no-drill installation with vehicle-specific mounting brackets Limited lifetime warranty (three-year finish, one-year parts)
AutoMeter AutoMeter has been driven to provide performance enthusiasts with the information they need to win. We've revolutionized the way that racers and vehicle builders think about instrumentation and vehicle electronics for more than 60 years. AutoMeter was founded by Vern Westberg in 1957. In the early days, Vern would pour sand castings in his family’s backyard, and his sons would help him assemble products in their basement at night. During our 60+ years, we have developed many industry-leading products from our rev control tachometers and quick responding tachometers, to our high technology LCD Competition data acquisition systems. We have set the standard for accuracy, precision, and durability. Today, we have state-of-the-art cellular manufacturing centers, advanced engineering systems, and product technology that is unmatched in the instrumentation marketplace.
NFAB TrailSlider The new N-FAB TrailSlider is a body-mounted rock slider that features 3/16” heavy gauge steel tubing and gussets that will hold up to extreme conditions. The TrailSlider also comes powder-coated in our durable, textured black finish. Easy to install with no special tools required, the new N-FAB TrailSlider is the ultimate upgrade for any 4-Runner, Wrangler, Tacoma, Colorado, and Ranger. Features .095”-wall outside tube with steel gussets to protect from side impacts 2” x 2” .1875”-wall primary tube with .188”-thick steel plate gussets Features a durable textured black powder coat finish Fully welded and gusseted one-piece design Easy installation Warranty: 5-year finish/ Limited Lifetime workmanship Image Link: https://app.box.com/s/nub5sjar1tt27xlpvg375lgrqqegp4fx
Stampede Vigilante Premium Hood Shield American Eagle Enjoy maximum protection with Hood Protectors designed to complement the look of your vehicle. Stampede Automotive Accessories Hood Protectors take the original Bug Shield to a new level. Our knowledge of aerodynamics reveal—taller isn’t necessarily better—it’s the shape that matters. High profile, full-wrap style with deflection provides complete hood, fender and windshield protection from road debris, rocks, bugs and more. Features Precision engineered to fit your vehicle Easy installation: no special hardware or drilling required and attaches with 3M automotive-grade adhesive Car-wash safe UV and scratch-resistant Limited lifetime warranty Image Link: https://app.box.com/s/p6lo4fc9txpficl7n3o2kendx3xqp5tt
UWS 100-Gallon Transfer Tank for Short-Bed/Gooseneck Hitches #ST-100-RT-MB Short-bed truck? No problem! Gooseneck hitch? Perfect! UWS offers a number of specialized transfer tanks, including this 100-gallon rectangular steel model, that are compatible with all full-size trucks, including short-beds and truck beds with a gooseneck hitch installed. This provides more flexibility and usability for individuals with multi-purpose truck beds. Heavy-duty 14-gauge steel tank is 100% pressure-tested for safety DOT-compliant for transporting Class 3 combustible fuels only, such as diesel Lockable, commercial-grade vented cap with reinforced collar for added security Assembled in USA Limited lifetime warranty (one-year finish, one-year parts)
ZyBar 8 oz. Midnight Black (part no. 11008) ZyBar's 8 oz. Midnight Black (part no. 11008) high-temperature, heat-dissipation coating is designed to reduce radiant heat, reduce under hood temperatures, offer outstanding corrosion resistance, provide lasting color stability under the most extreme engine conditions and extend the life of your components. ZyBar is rated to internal temperatures well in excess of 2000 F. ZyBar is a single component, durable polymer coating that far out performs ceramic paints, wraps and heat tapes. ZyBar is spray-applied inside and outside the component. ZyBar treats manifolds, headers, turbo housings, exhaust, brakes and intakes. ZyBar is a thin .001-.0025 film coating that is either oven cured (2 hours @ 450 F) or air cured (120 hours). Builders, jobbers, dealers and specialty-coating operations interested in learning more can call 913-599-2600 or visit www.zycoat.com.

By SEMA Editors

The SEMA Data Co-op (SDC) is the largest database of specialty market product information.

Manufacturers whose products are shown here have achieved data excellence status by providing the desired product descriptions, digital assets, vehicle fitment and other sales-related facts to make it easy for retailers, jobbers and WDs to create engaging and informative product listings, giving customers confidence in their buying decision.

Products from these and other brands with rich data will be featured in future SEMA eNews issues.

ARIES Universal ActionTrac Mounting Brackets (6-Pack) #3025176 ARIES universal ActionTrac brackets are a custom fabrication solution for installing ARIES ActionTrac powered running boards. Normally, ActionTrac boards are engineered to install with vehicle-specific brackets. However, if vehicle-specific brackets are not available, these universal brackets offer a custom-fab alternative. Provides board-attachment points for custom-fabricated brackets (not included) Designed for custom installation if vehicle-specific brackets are not available Universal wiring kit included for running-board operation Steel bracket construction with black powder-coat finish Custom brackets and boards not included
Crown Automotive Oil Pump Drive Assembly Crown Automotive’s improved Oil Pump Drive Assembly is designed for the '05-'06 TJ Wrangler with 4.0L Engine. The reengineered OPDA moves the seal above the upper bushing, allowing oil to lubricate it. An oil channel was also added to the shaft to increase overall lubrication to the area. The factory OPDA is designed with two oil-impregnated bronze bushings separated by an oil seal. The upper bushing is cut off from lubrication by the seal, resulting in premature failure. Over time, radial movement develops in the shaft. Eventually, the complete assembly and camshaft will fail. A worn OPDA will show symptoms, such as a check engine light or a squeaking noise coming from the OPDA. www.CrownAutomotive.net
CURT Class 4 Trailer Hitch, 2-inch Receiver for 2020 Chevy/GMC HD #14005 The CURT class 4 hitch is a first-to-market receiver hitch for the 2020 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD. It is designed, manufactured and tested in the USA, and it installs with no drilling required. Rated to 10,000 lbs. gross trailer weight and 1,000 lbs. tongue weight Compatible with weight distribution hitch (12,000 lbs. WD / 1,200 lbs. WDTW) Engineered with a vehicle-specific design for a custom fit Tested for safety in accordance with SAE J684 Precisely welded for superior strength and fit Protected by a durable high-gloss black powder coat finish Co-cured in a rust-resistant liquid Bonderite coating Equipped with an open-back receiver for easy cleaning Limited lifetime warranty (one-year finish, one-year parts) Made in USA (may include imported hardware)
FST Performance (Filter Solutions Technologies LLC) RPM350 FlowMax Fuel Filter System Filtering down to 4 microns, water separation, and flowing at 300 gph, the RPM350 FlowMax Fuel Filter System is the complete package and a must in the high contamination (dust, silt, etc.) of off-road racing. With the new high horsepower fuel injected engines and ethanol-based fuels; low micron filtering (2 ½ times or 60% better than most competitors), high flow and water separation are a must. Featuring multiple (2 Inlet and 2 Outlet), -8 ORB/AN ports makes for easy installation and/or options to add accessories like fuel pressure senders. Also, with the spin-on type of filter, it makes for easy & quick changing of the filter; with nothing to clean out which eliminates the chance for fuel system contamination. Visit www.fstperformance.com or call 407-323-0122.
HushMat HushMat Quiet Tape (part#30300) HushMat Quiet Tape (part#30300) is soft pliable closed cell foam tape. Quiet Tape is great for securing wiring to sheet metal, fiberglass, wood or plastic panels, or dash. It also secures harnesses and closes gaps on trim panels too. HushMat Quiet Tape is a single sided foam tape designed to adhere to fabrics, headliner, plastics, and metal with no bleed through. Quiet Tape is reusable. Perfect to use for your car, home, or any project.  Visit www.hushmat.com or call 913-599-2600
Leed Brakes Rear Disc Brake Conversion Kits Rear Disc Brake Conversion Kits are now available from LEED Brakes for '55-'68 General Motors full size cars. Kits include everything needed to mount Leed's 54mm Single Piston Caliper to the GM 10 or 12 bolt rear axle with 5x4.75” wheel bolt pattern. The calipers are also equipped with a built-in parking brake to help keep installation easy. The base kit uses a high-quality, Zinc-plated finish on the calipers to reduce corrosion, extending the life of your brake system. Part Number: RC1007
LUVERNE Black Steel 2" Grille Guard, Compatible with Ford Co-Pilot360 #341724-341725 The LUVERNE grille guard is engineered with Ford’s Co-Pilot360 Technology in mind. It has a shorter profile and mounts closer to the truck, so it will not interfere with the Co-Pilot360™ features, including the Lane-Keeping system and Adaptive Cruise Control with Forward Collision Warning and Brake Support. This ensures that the smart tech your customers invested in for their truck will be fully-functional with the grille guard, maintaining exceptional safety. Contoured horizontal tubes for signature vehicle logo reveal Durable, textured black powder coat finish for lasting corrosion resistance Easy, no-drill installation with vehicle-specific mounting brackets Limited lifetime warranty (three-year finish, one-year parts)
AutoMeter AutoMeter has been driven to provide performance enthusiasts with the information they need to win. We've revolutionized the way that racers and vehicle builders think about instrumentation and vehicle electronics for more than 60 years. AutoMeter was founded by Vern Westberg in 1957. In the early days, Vern would pour sand castings in his family’s backyard, and his sons would help him assemble products in their basement at night. During our 60+ years, we have developed many industry-leading products from our rev control tachometers and quick responding tachometers, to our high technology LCD Competition data acquisition systems. We have set the standard for accuracy, precision, and durability. Today, we have state-of-the-art cellular manufacturing centers, advanced engineering systems, and product technology that is unmatched in the instrumentation marketplace.
NFAB TrailSlider The new N-FAB TrailSlider is a body-mounted rock slider that features 3/16” heavy gauge steel tubing and gussets that will hold up to extreme conditions. The TrailSlider also comes powder-coated in our durable, textured black finish. Easy to install with no special tools required, the new N-FAB TrailSlider is the ultimate upgrade for any 4-Runner, Wrangler, Tacoma, Colorado, and Ranger. Features .095”-wall outside tube with steel gussets to protect from side impacts 2” x 2” .1875”-wall primary tube with .188”-thick steel plate gussets Features a durable textured black powder coat finish Fully welded and gusseted one-piece design Easy installation Warranty: 5-year finish/ Limited Lifetime workmanship Image Link: https://app.box.com/s/nub5sjar1tt27xlpvg375lgrqqegp4fx
Stampede Vigilante Premium Hood Shield American Eagle Enjoy maximum protection with Hood Protectors designed to complement the look of your vehicle. Stampede Automotive Accessories Hood Protectors take the original Bug Shield to a new level. Our knowledge of aerodynamics reveal—taller isn’t necessarily better—it’s the shape that matters. High profile, full-wrap style with deflection provides complete hood, fender and windshield protection from road debris, rocks, bugs and more. Features Precision engineered to fit your vehicle Easy installation: no special hardware or drilling required and attaches with 3M automotive-grade adhesive Car-wash safe UV and scratch-resistant Limited lifetime warranty Image Link: https://app.box.com/s/p6lo4fc9txpficl7n3o2kendx3xqp5tt
UWS 100-Gallon Transfer Tank for Short-Bed/Gooseneck Hitches #ST-100-RT-MB Short-bed truck? No problem! Gooseneck hitch? Perfect! UWS offers a number of specialized transfer tanks, including this 100-gallon rectangular steel model, that are compatible with all full-size trucks, including short-beds and truck beds with a gooseneck hitch installed. This provides more flexibility and usability for individuals with multi-purpose truck beds. Heavy-duty 14-gauge steel tank is 100% pressure-tested for safety DOT-compliant for transporting Class 3 combustible fuels only, such as diesel Lockable, commercial-grade vented cap with reinforced collar for added security Assembled in USA Limited lifetime warranty (one-year finish, one-year parts)
ZyBar 8 oz. Midnight Black (part no. 11008) ZyBar's 8 oz. Midnight Black (part no. 11008) high-temperature, heat-dissipation coating is designed to reduce radiant heat, reduce under hood temperatures, offer outstanding corrosion resistance, provide lasting color stability under the most extreme engine conditions and extend the life of your components. ZyBar is rated to internal temperatures well in excess of 2000 F. ZyBar is a single component, durable polymer coating that far out performs ceramic paints, wraps and heat tapes. ZyBar is spray-applied inside and outside the component. ZyBar treats manifolds, headers, turbo housings, exhaust, brakes and intakes. ZyBar is a thin .001-.0025 film coating that is either oven cured (2 hours @ 450 F) or air cured (120 hours). Builders, jobbers, dealers and specialty-coating operations interested in learning more can call 913-599-2600 or visit www.zycoat.com.