SEMA Show Exhibitors: Get your parts on more vehicles at the 2012 SEMA Show by offering products to builders through the Products for Project-Vehicle Builders list. The list is a simple way to connect manufacturers looking for additional product exposure at the SEMA Show with the builders who design and create the vehicles that grab the attention of media and buyers from around the world.

Product-placement opportunities such as these are so beneficial that manufacturers often offer products for free or at a greatly reduced rate. To participate in the list, access the Products for Project-Vehicle Builders form.

The latest addition to the list will be included each week in SEMA eNews, when available. The list is open to exhibitors of the 2012 SEMA Show only and is intended to build awareness for SEMA Show exhibitors and their products.

For questions or additional information, contact Jason Catullo at jasonc@sema.org 909-978-6713.

---

Latest Products Offered

Engine/Underhood Components

AIRAID Filter Co.: New cold air intake systems for the 2013 Scion FR-S and Subaru BRZ! Unlimited supply available! Contact: Brian Paravicini, brian@airaid.com, 602-652-9724. Website: www.airaid.com.

S&B Filters Inc.: Cold air intake kits for gas and diesel trucks. Contact: Ryan Herold, rherold@sbfilters.com, 909-232-8920. Website: www.sbfilters.com.

Warrior Products: HoodLift by Warrior Hood strut kits for Jeeps. Contact: Jason Roy, jason@warriorproducts.com, 503-691-8915. Website: www.warriorproducts.com.

Exterior Components/Accessories

Mickey Thompson Performance Tires & Wheels: M/T Metal Series steel wheels with black powder coat available in 15-inch, 16-inch and 17-inch sizes. Available for most popular Jeeps, pickups and 4x4s. Street Comp ultra-high performance tires available for 17- to 20-inch wheel sizes. Classic big rig wheels (20x9 or 20x11) for simulated "big rig" look. Contact: Willy Woo, wwoo@mickeythompsontires.com, 800-222-9092, ext. 3754. Websites: www.mickeythompsontires.com/metal, www.mickeythompsontires.com/street.php?item=StreetComp, www.mickeythompsontires.com/wheels.php?item=ClassicBigRig.

Warrior Products: Body armor, bumpers, tube flares for Jeep and FJ Cruiser. Contact: Jason Roy, jason@warriorproducts.com, 503-691-8915. Website: www.warriorproducts.com.

Westin Automotive: Front-end products, winches and winch accessories, Step-Up products, truck bed/body trim products, heavy-duty truck accessories and Fey bumpers. Contact: Antoinette Belton, abelton@westinautomotive.com, 626-960-6762, ext. 456. Website: www.westinautomotive.com.

Interior Components/Accessories

 

Other Products & Services

 

Previous Submissions

Engine/Underhood Components

Advanced Clutch Technology Inc. (ACT): Clutches and flywheels. Contact: Daniel Starksen, 661-940-7555, daniels@advancedclutch.com. Website: www.advancedclutch.com.

AEM Induction Systems: Full line of high-performance air intake systems and air filters for sport compact, modern-day musclecars and trucks and SUVs, including gas and diesel applications. Contact: Lucio Tapia, 800-992-3000, luciot@aemintakes.com.

AIRAID Filter Co.: Cold air intake systems. Contact: Brian Paravicini, 602-652-9724, brian@airaid.com. Website: www.airaid.com.

American Truck Technology: Exotic "Big Mouth" stainless steel exhaust tips for light-duty trucks with non-traditional profiles featuring triangles, tear drops and ovals. Contact: Jeff Liu, 855-288-8782, jeff.liu@americantrucktechnology.com. Website: www.americantrucktechnology.com.

AMSOIL Inc.: Synthetic motor oil & drivetrain fluids. Contact: Ed Newman or Jamie Jarvi, info@amsoil.com, 715-399-6557. Website: www.AMSOIL.com.

Champion Oil: Champion produces and blends more than 300 products, including fuel, oil, engine additives and lubricants for the racing, automotive, heavy truck, agricultural, industrial and specialty markets. Contact: Karl Dedolph, 660-890-6231, kdedolph@championbrands.com. Website: www.championsusechampion.com.

CORSA Performance Exhausts: Premium, stainless steel, high-performance exhaust systems for the newest cars and trucks. Contact: Casey Milano, 330-244-9980, casey@mcculloughpr.com. Website: www.corsaperformance.com.

DeatschWerks: Flow-matched fuel-injector sets (up to 2,200cc). Contact: Greg Brungardt, 405-217-0718, Greg@DeatschWerks.com. Website: www.DeatschWerks.com.

Design Engineering Inc.: DEI heat protection, CryO2 cryogenic air charge cooling system, Boom Mat sound deadening materials, Ny-Trex nitrous systems and components and SPA turbo components. Contact: Tom Miller, 440-930-7940, tmiller@designengineering.com. Website: www.designengineering.com.

DevilsOwn Injection: Progressive water methanol injection kit. Contact: Chance McClurkin, 405-470-4356, chance@alcohol-injection.com. Website: www.alcohol-injection.com.

Edge Products/Superchips: Performance tuning and data monitoring products for gas and diesel trucks, cars, SUVs and Jeeps. Products include: Edge Insight CS/CTS, Evolution CS/CTS, Juice with Attitude CS/CTS, EvoHT, Superchips Flashpaq, VIVID Linq, TrailDash, TrailJammer TDX and Cortex. Contact: Jim McGinn, 770-846-0327, jmcginn@powerteq.com. Website: www.edgeproducts.com or www.superchips.com.

Granatelli Motor Sports Inc.: Late-model Ford, Chevy and Dodge ignition coils, cold air intake systems, mass airflow sensors. Contact: J.R. Granatelli, 805-486-6644, jrgranatelli@granatellimotorsports.com. Website: www.granatellimotorsports.com.

Haltech Engine Management Systems: Engine Management systems wire in and PNP including ignition systems and display dashes. Contact: Steve Nichols, Steve@haltech.com, 760-598-1941. Website: www.haltech.com.

K&N Engineering Inc.: High-flow intake systems, OE replacement air filters, high-performance oil filters for most vehicles and powersports applications. Contact: Lucio Tapia, 951-826-4000, ext. 4350, luciot@knfilters.com. Website: www.knfilters.com.

Maradyne High Performance Fans: High-performance cooling fans, including the dual 12-in. Jetstreme Platinum fan, plus a variety of heaters and accessories. Contact: Casey Milano, 330-244-9980, casey@mcculloughpr.com. Website: www.maradynehp.com.

ProCharger: Intercooled ProCharger supercharger systems. Cary Pangrac, 913-338-2886, cary.pangrac@procharger.com. Website: www.procharger.com.

Odyssey Battery by EnerSys: High-performance batteries and battery chargers. Contact: April Lowther, april.lowther@enersys.com, 610-208-1729. Website: www.odysseybattery.com.

Quick Time Performance: AR3 stainless steel mufflers. Contact: Barry Adler, 973-513-9955, sales@quicktimeperformance.com.

Road Magnet Performance Springs: Precision mechanical springs. Contact: Mark Habicht, 410-686-9100, mark@roadmagnet.com. Website: www.roadmagnet.com.

XS Power Batteries: Batteries, chargers, billet hold downs, power cable and other electrical accessories. Contact: Nathan Way, 888-497-7693, nathan@xspowerbatteries.com. Website: www.4XSPower.com.

Exterior Components/Accessories

American Force Wheels: five-lug, six-lug, eight-lug, 10-lug dually and SRW truck wheels. Contact: Deyan Font, 800-620-6259, deyan@americanforcewheels.com. Website: www.americanforcewheels.com.

American Truck Technology: Exotic chrome accessories for large 22.5-in. wheels and dramatic "Big Mouth" stainless steel exhaust tips with non-traditional profiles, featuring triangles, tear drops and ovals. Contact: Jeff Liu, 855-288-8782, jeff.liu@americantrucktechnology.com. Website: www.americantrucktechnology.com.

AnzoUSA: Headlights, taillights, third brake lights, universal lighting and off-road lights. Contact: Shaun Callaway, 909-590-8618, ext. 111, shaun@anzousa.com. Website: www.anzousa.com.

APS Auto Parts Specialist Inc.: Aluminum billet grille, stainless steel wire mesh grille, CNC perimeter grille, EZ wire mesh grille. Contact: Paul Chen, 866-837-1277 ext. 204, paul@apsautoparts.com. Website: www.apsautoparts.com.

A.R.E. Accessories LLC: Fiberglass truck caps and tonneau covers. Contact: Casey Milano, 330-244-9980, casey@mcculloughpr.com. Website: www.4are.com.

Armano-XIX Wheels: 20-in. and 22-in. staggered wheels with stainless-steel chrome lip; 18-in., 20-in., 22-in., 24-in. and 26-in. chromed and painted wheels for SUVs. Contact: Jenny Hindmann, 626-350-9000. Website: www.xixwheels.com.

BASF Refinish: BASF Foose colors, R-M Carizzma (Candy) paint, Glasurit and Limco finishes available. Products include primer, color and clear for selected vehicles. Contact: Brian Fox, 717-577-6449, brian.fox@basfpaintnews.com. Websites: www.basfrefinish.com, www.basfpaintnews.com and www.carizzmacolor.com.

BMF Wheels: BMF Death Metal Black mesh grilles are available for Chevy, Dodge, Ford and Toyota. Contact: Blake Ramthun, 888-313-2580, blake@bmfwheels.com. Website: www.bmfwheels.com.

Ce'zzanne Collection: Custom aluminum alloy wheels, black art (one-piece cast-black painted and machined), Cezzanne Collection (two-piece forged rim-chrome, painted and machined). Contact: Larry Brown, 213-663-6013, larry@envythefuture.com. Website: www.blackartwheels.com or www.cezzannecollection.com.

Convert-A-Ball Distributing: The original Convert-A-Ball interchangeable tow ball system—cushioned ball mounts (both 2-inch and 2-1/2-inch receiver). Contact: Denis Cheatham, info@convert-a-ball.net, 308-254-7115. Website: www.convert-a-ball.net.

Delta Tech Industries LLC: Driving lights, fog lights, headlights and auxiliary lights. Contact: Tom Ameduri, 909-673-1900, tom@deltalights.com. Website: www.deltalights.com.

EGR Inc.: Fender flares, window visors, hood shields, integrated side steps. Contact: Thomas Hornbake, 909-923-7075, thornbak@egrusa.com. Website: www.egrusa.com.

Extang/TruXedo/BedRug/UnderCover: Extang Tonneau Covers. Contact: Steve Kelley, 734-434-3516, skelley@extang.com. Also offering the TonneauMate tonneau toolbox. Contact: Joel Mohlenhoff, joel.mohlenhoff@truxedo.com, 651-731-5334. Website: www.extang.com.

Go Rhino! Products/Big Country: New Dominator D4 sidesteps, heavy-duty grille guards, 4-, 5- and 6-in. oval sidebars, hitch steps, bed bars, bed rails and exhaust tips. Contact: Kathryn Reinhardt, 888-427-4466, kathryn@gorhino.com. Website: www.gorhino.com or www.bigcountryauto.com.

ORACLE Lighting: ORACLE headlight halo kits featuring high-powered SMD rings in a variety of colors to match any theme. Contact: Jonathan Barber or Matthew Alesich, 800-407-5776, jonathan@oraclelights.com. Website: www.oraclelights.com.

Prestige Fender Flares: Pickup fender flares. Contact: Jim Wortham, jimw@prestigefenderflares.com, 888-762-8608.

Ranch Hand Truck Accessories: Heavy-duty grille guards; front bumper replacements; bullnose bumper replacements; back bumpers; headache rack systems; toolboxes; steps for Chevy, Dodge, GMC, Ford, Toyota and Jeep vehicles. Contact: Cherise Ratliff, 361-594-4608, ext. 118, cratliff@ranchhand.com. Website: www.ranchhand.com.

Raptor Series: Three-inch stainless round nerf bars, four-, five- and six-inch stainless/black cab length oval step tubes, four-, five- and six-inch stainless/black wheel-to-wheel oval step tubes, seven-inch stainless steel running boards, stainless truck bedrails. Contact: Mike McGinnis, 877-769-3765, ext. 303, mike@raptorseries.com. Website: www.raptorseries.com.

Retrax Truck Bed Covers: The complete line of Retrax retractable pickup bed covers are available. Contact: Andy Nephew, 701-746-5596, anephew@retrax.com. Website: www.retrax.com.

RK Sport Inc.: Fiberglass and carbon fiber: hoods, trunk spoilers and miscellaneous body parts. Urethane ground effects kit, body kits, bumpers, spoiler and small miscellaneous accessories. Contact: Sean Tito, 951-894-7883, sean@rksprot.com. Website: www.rksport.com.

Shining Monkey Corp.: Car polish, wax, wash, tire dressing, quick detailer, matte paint cleaner/protector and vinyl wrap cleaner/protector. Contact: Shining Monkey, 888-2656-8615, info@shiningmonkeycorp.com. Website: www.shiningmonkeycorp.com.

StreetGlow Inc.: LED lighting. Contact: Jack Panzarella, 973-709-9000, ext. 103, jackp@streetglow.com. Website: www.streetglow.com.

Strike Force Zebra: JK Wrangler half doors. Contact: Bill Ball, 661-310-7829, billb@strikeforcezebra.com. Website: www.strikeforcezebra.com.

Truck Accessories Group-LEER/Century/Raider/Pace Edwards: Includes Leer and Pace Edwards. The member companies are manufacturers of a wide variety of fiberglass, aluminum truck caps, tonneaus and retractable covers for pickups used in the truck cap, fleet and commercial industries. TAG products maximize hauling capacity for work trucks and fleets with versatile products. Contact: Patricia Stewart, 916-771-0196, pstewart@truckgroup.com. Website: www.truckgroup.com/brands.

UASG: Professional application by 3M Certified Graphic Installation Companies for self adhesive vinyl decals, specialty films and wraps on vehicles. Contact: Julie Martin, 888-579-9793, Feedback@uasg.org. Website: www.uasg.org.

Vossen Wheels: Vossen Wheels, 19- to 22-in. Contact: Jav, 305-463-7778, jav@vossenwheels.com. Website: www.vossenwheels.com.

VPR4X4 Bumpers: Custom-built off-road bumpers. Contact: Deyan Font, 888-847-3779, deyan@vpr4x4.com. Website: www.vpr4x4.com.

Weld Racing LLC: Weld Racing is featuring 17- and 20-in. wheels for trucks up to 14 in. wide, 17- and 19.5-in. wheels for dually trucks, and 15-, 17-, 18- and 20-in. wheels for high-performance cars up to 17.5 in. wide. Also featured are 16x6 forged trailer wheels that match the truck designs. All are forged aluminum and all are made in the USA. Contact: Gregory Smith, 816-423-5712, gsmith@weldracing.com. Website: www.weldracing.com.

Interior Components/Accessories

Alea Leather Specialist Inc.: Distributor and manufacturer of premium-quality leather seat covers and car accessory products throughout North America. Contact: www.alealeather.com/eng/news_detail.php?cat_id=1&id=114. Website: www.alealeather.com.

BedRug Inc.: BedRug or BedTred truck bedliner, TrailerWare interior protective wall covering kit, Jeep protective covering (similar to BedRug and BedTred). Contact: Ryan Herman, 734-372-8120, rherman@bedrug.com. Website: www.bedrug.com.

BOLT Locks by STRATTEC: Padlocks, receiver hitch locks, cable locks, spare tire locks, tailgate handle locks and toolbox retrofit handle kits. Contact: Casey Milano, 330-244-9980, casey@mcculloughpr.com. Website: www.boltlock.com.

Delta Tech Industries LLC: LED interior lights. Contact: Tom Ameduri, 909-673-1900, tom@deltalights.com. Website: www.deltalights.com.

Haltech Engine Management Systems: Wideband far kit with display. Contact: Steve Nichols, Steve@haltech.com, 760-598-1941. Website: www.haltech.com.

Intellitronix Corp.: Digital LED gauges and tachometers. Contact: Joe Young, 440-413-5003, joe.young@intellitronix.com. Website: www.intellitronix.com.

Monster Hooks Inc.: Monster Hook, Mini Monster Hook, The Ultimate Recovery Hook! Diesel Hex Flo Exhaust Tips. Contact: Marco Najarro, 408-313-0716, marco@monsterhooksinc.com. Website: www.monsterhooksinc.com.

RAM Mounting Systems: iPad, tablet, cell phone, laptop and netbook mounts. Contact: Jacob Parker, 206-763-8361, ext. 111, jacob.parker@rammount.com. Website: www.rammount.com.

StreetGlow Inc.: LED lighting. Contact: Jack Panzarella, 973-709-9000, ext. 103, jackp@streetglow.com. Website: www.streetglow.com.

Quiet Ride Solutions: AcoustiShield thermal acoustic auto insulation (pre-cut, ready-to-install kits) and firewall insulation panels for 1,200 popular cars and trucks. Contact: Timothy Cox, 209-942-4777, timcox@quietride.com. Website: www.quietride.com.

Roadwire: Leather interiors and sunroofs. Contact: Tracy Pena, tracyp@roadwire.com, 877-762-3947. Website: www.roadwire.com.

VDO Instrumentation & Accessories: VDO gauges and accessories. Contact: AnnaMaria Blose, 610-289-0488, annamaria.blose@continental-corporation.com. Website: www.vd-gauges.com.

XS Power Batteries: 0, 2, 4, and 8 AWG power and ground wire with accessories. Contact: Nathan Way, 888-497-7693, nathan@xspowerbatteries.com. Website: www.4XSPower.com.

Suspension/Brake Components

BMF Wheels: BMF leveling kits available for Chevy, Dodge, Ford, Toyota, Nissan and Jeep. Contact: Blake Ramthun, 888-313-2580, blake@bmfwheels.com. Website: www.bmfwheels.com.

E-Stopp: Aftermarket push-button electronic E-brake. Contact: Jonathan Mill, jmill@estopp.com, 562-602-2842.

Granatelli Motor Sports Inc.: ’10–’13 Camaro suspension and brake upgrades; ’79–’12 Mustang suspension and brake upgrades. Contact: J.R. Granatelli, 805-486-6644, jrgranatelli@granatellimotorsports.com. Website: www.granatellimotorsports.com.

Hellwig Products Co. Inc.: Sway bars, air springs. Contact: Melanie White, mwhite@hellwigproducts.com, 559-799-3642. Website: www.hellwigproducts.com.

MGP Caliper Covers: MGP Caliper Covers. Custom logo engravings and custom paint also available for approved candidates. Contact: Ben Wong, 877-995-0003, ben.wong@calipercovers.com. Website: www.calipercovers.com.

ProRYDE Suspension Systems: Lift and leveling kits, tunable front and rear ride height to achieve your exact look, suspension geometry components, adjustable camber/caster ball joints, pinion angle cam bolts, etc. Contact: Shawn Leibfried, 888-813-7933, shawn@northstarmfg.com. Website: www.proryde.com.

Road Magnet Performance Springs: Precision suspension springs. Contact: Mark Habicht, 410-686-9100, mark@roadmagnet.com. Website: www.roadmagnet.com.

Superlift Suspension Systems: Suspension lift and leveling systems and related off-road accessories for light truck, Jeep and SUV applications. Contact: Joey Arbogast, 318-397-3024, jarbogast@superlift.com. Website: www.superlift.com.

Other Products & Services

BMF Wheels: Available for Chevy, Dodge, Ford, Toyota, Nissan and Jeep, including 17x9, 18x9 and 20x9 in EZ-FIT wheel offerings for leveled and lifted applications, and 20x10, 22x9.5, 22x10.5 and 24x10.5 wheel offerings for lifted applications. Contact: Blake Ramthun, 888-313-2580, blake@bmfwheels.com. Website: www.bmfwheels.com.

DeatschWerks: Fuel pumps. Contact: Greg Brungardt, 405-217-0718, Greg@DeatschWerks.com. Website: www.DeatschWerks.com.

Excalibur Wheel Accessories/McLEAN Wire Wheels: Vintage wheels and wheel accessories. Contact: Robert Klippel, bob@excaliburwheel.com, 909-923-8300. Website: www.excaliburwheelaccessories.com. 

Extang/TruXedo/BedRug/UnderCover: Bed lights. Contact: Steve Kelley, 734-434-3516, skelley@extang.com. Website: www.extang.com.

Firestone Industrial Products: Complete suspension solutions that include Ride-Rite, Sport-Rite, Coil-Rite and Level-Rite air helper springs, plus the R4Tech hybrid air suspension system, designed to maximize the safe load-carrying capacity, stability and ride quality of cars, trucks and SUVs. Contact: Casey Milano, casey@mcculloughpr.com, 330-244-9980. Website: www.ride-rite.com.

Haltech Engine Management Systems: Wideband kits with display. Contact: Steve Nichols, Steve@haltech.com, 760-598-1941. Website: www.haltech.com.

Hornblasters Inc.: Air horns/train horns. Contact: Rigo, 813-783-8058, ext. 305, Rigo@HornBlasters.com, Website: www.HornBlasters.com.

Squash Performance: High-flow, in-tank dual and triple pump fuel systems for ’03+ Ram, ’10+ Camaro, Dodge Charger/Magnum/Challenger, Mazda Speed 3 and 6, Pontiac G8 and Lexus IS. Contact: Andy Quaas, 262-724-8035, aquaas@squashperformance.com. Website: squashperformance.com.

StreetGlow Inc.: LED lighting. Contact: Jack Panzarella, 973-709-9000, ext. 103, jackp@streetglow.com. Website: www.streetglow.com.

Truck Accessories Group-LEER/Century/Raider/Pace Edwards: Fiberglass caps and tonneaus, aluminum commercial caps, retractable tonneau covers. Contact: Patricia Stewart, 916-771-0196, pstewart@truckgroup.com. Website: www.truckgroup.com/brands.

SEMA Show Exhibitors: Get your parts on more vehicles at the 2012 SEMA Show by offering products to builders through the Products for Project-Vehicle Builders list. The list is a simple way to connect manufacturers looking for additional product exposure at the SEMA Show with the builders who design and create the vehicles that grab the attention of media and buyers from around the world.

Product-placement opportunities such as these are so beneficial that manufacturers often offer products for free or at a greatly reduced rate. To participate in the list, access the Products for Project-Vehicle Builders form.

The latest addition to the list will be included each week in SEMA eNews, when available. The list is open to exhibitors of the 2012 SEMA Show only and is intended to build awareness for SEMA Show exhibitors and their products.

For questions or additional information, contact Jason Catullo at jasonc@sema.org 909-978-6713.

---

Latest Products Offered

Engine/Underhood Components

AIRAID Filter Co.: New cold air intake systems for the 2013 Scion FR-S and Subaru BRZ! Unlimited supply available! Contact: Brian Paravicini, brian@airaid.com, 602-652-9724. Website: www.airaid.com.

S&B Filters Inc.: Cold air intake kits for gas and diesel trucks. Contact: Ryan Herold, rherold@sbfilters.com, 909-232-8920. Website: www.sbfilters.com.

Warrior Products: HoodLift by Warrior Hood strut kits for Jeeps. Contact: Jason Roy, jason@warriorproducts.com, 503-691-8915. Website: www.warriorproducts.com.

Exterior Components/Accessories

Mickey Thompson Performance Tires & Wheels: M/T Metal Series steel wheels with black powder coat available in 15-inch, 16-inch and 17-inch sizes. Available for most popular Jeeps, pickups and 4x4s. Street Comp ultra-high performance tires available for 17- to 20-inch wheel sizes. Classic big rig wheels (20x9 or 20x11) for simulated "big rig" look. Contact: Willy Woo, wwoo@mickeythompsontires.com, 800-222-9092, ext. 3754. Websites: www.mickeythompsontires.com/metal, www.mickeythompsontires.com/street.php?item=StreetComp, www.mickeythompsontires.com/wheels.php?item=ClassicBigRig.

Warrior Products: Body armor, bumpers, tube flares for Jeep and FJ Cruiser. Contact: Jason Roy, jason@warriorproducts.com, 503-691-8915. Website: www.warriorproducts.com.

Westin Automotive: Front-end products, winches and winch accessories, Step-Up products, truck bed/body trim products, heavy-duty truck accessories and Fey bumpers. Contact: Antoinette Belton, abelton@westinautomotive.com, 626-960-6762, ext. 456. Website: www.westinautomotive.com.

Interior Components/Accessories

 

Other Products & Services

 

Previous Submissions

Engine/Underhood Components

Advanced Clutch Technology Inc. (ACT): Clutches and flywheels. Contact: Daniel Starksen, 661-940-7555, daniels@advancedclutch.com. Website: www.advancedclutch.com.

AEM Induction Systems: Full line of high-performance air intake systems and air filters for sport compact, modern-day musclecars and trucks and SUVs, including gas and diesel applications. Contact: Lucio Tapia, 800-992-3000, luciot@aemintakes.com.

AIRAID Filter Co.: Cold air intake systems. Contact: Brian Paravicini, 602-652-9724, brian@airaid.com. Website: www.airaid.com.

American Truck Technology: Exotic "Big Mouth" stainless steel exhaust tips for light-duty trucks with non-traditional profiles featuring triangles, tear drops and ovals. Contact: Jeff Liu, 855-288-8782, jeff.liu@americantrucktechnology.com. Website: www.americantrucktechnology.com.

AMSOIL Inc.: Synthetic motor oil & drivetrain fluids. Contact: Ed Newman or Jamie Jarvi, info@amsoil.com, 715-399-6557. Website: www.AMSOIL.com.

Champion Oil: Champion produces and blends more than 300 products, including fuel, oil, engine additives and lubricants for the racing, automotive, heavy truck, agricultural, industrial and specialty markets. Contact: Karl Dedolph, 660-890-6231, kdedolph@championbrands.com. Website: www.championsusechampion.com.

CORSA Performance Exhausts: Premium, stainless steel, high-performance exhaust systems for the newest cars and trucks. Contact: Casey Milano, 330-244-9980, casey@mcculloughpr.com. Website: www.corsaperformance.com.

DeatschWerks: Flow-matched fuel-injector sets (up to 2,200cc). Contact: Greg Brungardt, 405-217-0718, Greg@DeatschWerks.com. Website: www.DeatschWerks.com.

Design Engineering Inc.: DEI heat protection, CryO2 cryogenic air charge cooling system, Boom Mat sound deadening materials, Ny-Trex nitrous systems and components and SPA turbo components. Contact: Tom Miller, 440-930-7940, tmiller@designengineering.com. Website: www.designengineering.com.

DevilsOwn Injection: Progressive water methanol injection kit. Contact: Chance McClurkin, 405-470-4356, chance@alcohol-injection.com. Website: www.alcohol-injection.com.

Edge Products/Superchips: Performance tuning and data monitoring products for gas and diesel trucks, cars, SUVs and Jeeps. Products include: Edge Insight CS/CTS, Evolution CS/CTS, Juice with Attitude CS/CTS, EvoHT, Superchips Flashpaq, VIVID Linq, TrailDash, TrailJammer TDX and Cortex. Contact: Jim McGinn, 770-846-0327, jmcginn@powerteq.com. Website: www.edgeproducts.com or www.superchips.com.

Granatelli Motor Sports Inc.: Late-model Ford, Chevy and Dodge ignition coils, cold air intake systems, mass airflow sensors. Contact: J.R. Granatelli, 805-486-6644, jrgranatelli@granatellimotorsports.com. Website: www.granatellimotorsports.com.

Haltech Engine Management Systems: Engine Management systems wire in and PNP including ignition systems and display dashes. Contact: Steve Nichols, Steve@haltech.com, 760-598-1941. Website: www.haltech.com.

K&N Engineering Inc.: High-flow intake systems, OE replacement air filters, high-performance oil filters for most vehicles and powersports applications. Contact: Lucio Tapia, 951-826-4000, ext. 4350, luciot@knfilters.com. Website: www.knfilters.com.

Maradyne High Performance Fans: High-performance cooling fans, including the dual 12-in. Jetstreme Platinum fan, plus a variety of heaters and accessories. Contact: Casey Milano, 330-244-9980, casey@mcculloughpr.com. Website: www.maradynehp.com.

ProCharger: Intercooled ProCharger supercharger systems. Cary Pangrac, 913-338-2886, cary.pangrac@procharger.com. Website: www.procharger.com.

Odyssey Battery by EnerSys: High-performance batteries and battery chargers. Contact: April Lowther, april.lowther@enersys.com, 610-208-1729. Website: www.odysseybattery.com.

Quick Time Performance: AR3 stainless steel mufflers. Contact: Barry Adler, 973-513-9955, sales@quicktimeperformance.com.

Road Magnet Performance Springs: Precision mechanical springs. Contact: Mark Habicht, 410-686-9100, mark@roadmagnet.com. Website: www.roadmagnet.com.

XS Power Batteries: Batteries, chargers, billet hold downs, power cable and other electrical accessories. Contact: Nathan Way, 888-497-7693, nathan@xspowerbatteries.com. Website: www.4XSPower.com.

Exterior Components/Accessories

American Force Wheels: five-lug, six-lug, eight-lug, 10-lug dually and SRW truck wheels. Contact: Deyan Font, 800-620-6259, deyan@americanforcewheels.com. Website: www.americanforcewheels.com.

American Truck Technology: Exotic chrome accessories for large 22.5-in. wheels and dramatic "Big Mouth" stainless steel exhaust tips with non-traditional profiles, featuring triangles, tear drops and ovals. Contact: Jeff Liu, 855-288-8782, jeff.liu@americantrucktechnology.com. Website: www.americantrucktechnology.com.

AnzoUSA: Headlights, taillights, third brake lights, universal lighting and off-road lights. Contact: Shaun Callaway, 909-590-8618, ext. 111, shaun@anzousa.com. Website: www.anzousa.com.

APS Auto Parts Specialist Inc.: Aluminum billet grille, stainless steel wire mesh grille, CNC perimeter grille, EZ wire mesh grille. Contact: Paul Chen, 866-837-1277 ext. 204, paul@apsautoparts.com. Website: www.apsautoparts.com.

A.R.E. Accessories LLC: Fiberglass truck caps and tonneau covers. Contact: Casey Milano, 330-244-9980, casey@mcculloughpr.com. Website: www.4are.com.

Armano-XIX Wheels: 20-in. and 22-in. staggered wheels with stainless-steel chrome lip; 18-in., 20-in., 22-in., 24-in. and 26-in. chromed and painted wheels for SUVs. Contact: Jenny Hindmann, 626-350-9000. Website: www.xixwheels.com.

BASF Refinish: BASF Foose colors, R-M Carizzma (Candy) paint, Glasurit and Limco finishes available. Products include primer, color and clear for selected vehicles. Contact: Brian Fox, 717-577-6449, brian.fox@basfpaintnews.com. Websites: www.basfrefinish.com, www.basfpaintnews.com and www.carizzmacolor.com.

BMF Wheels: BMF Death Metal Black mesh grilles are available for Chevy, Dodge, Ford and Toyota. Contact: Blake Ramthun, 888-313-2580, blake@bmfwheels.com. Website: www.bmfwheels.com.

Ce'zzanne Collection: Custom aluminum alloy wheels, black art (one-piece cast-black painted and machined), Cezzanne Collection (two-piece forged rim-chrome, painted and machined). Contact: Larry Brown, 213-663-6013, larry@envythefuture.com. Website: www.blackartwheels.com or www.cezzannecollection.com.

Convert-A-Ball Distributing: The original Convert-A-Ball interchangeable tow ball system—cushioned ball mounts (both 2-inch and 2-1/2-inch receiver). Contact: Denis Cheatham, info@convert-a-ball.net, 308-254-7115. Website: www.convert-a-ball.net.

Delta Tech Industries LLC: Driving lights, fog lights, headlights and auxiliary lights. Contact: Tom Ameduri, 909-673-1900, tom@deltalights.com. Website: www.deltalights.com.

EGR Inc.: Fender flares, window visors, hood shields, integrated side steps. Contact: Thomas Hornbake, 909-923-7075, thornbak@egrusa.com. Website: www.egrusa.com.

Extang/TruXedo/BedRug/UnderCover: Extang Tonneau Covers. Contact: Steve Kelley, 734-434-3516, skelley@extang.com. Also offering the TonneauMate tonneau toolbox. Contact: Joel Mohlenhoff, joel.mohlenhoff@truxedo.com, 651-731-5334. Website: www.extang.com.

Go Rhino! Products/Big Country: New Dominator D4 sidesteps, heavy-duty grille guards, 4-, 5- and 6-in. oval sidebars, hitch steps, bed bars, bed rails and exhaust tips. Contact: Kathryn Reinhardt, 888-427-4466, kathryn@gorhino.com. Website: www.gorhino.com or www.bigcountryauto.com.

ORACLE Lighting: ORACLE headlight halo kits featuring high-powered SMD rings in a variety of colors to match any theme. Contact: Jonathan Barber or Matthew Alesich, 800-407-5776, jonathan@oraclelights.com. Website: www.oraclelights.com.

Prestige Fender Flares: Pickup fender flares. Contact: Jim Wortham, jimw@prestigefenderflares.com, 888-762-8608.

Ranch Hand Truck Accessories: Heavy-duty grille guards; front bumper replacements; bullnose bumper replacements; back bumpers; headache rack systems; toolboxes; steps for Chevy, Dodge, GMC, Ford, Toyota and Jeep vehicles. Contact: Cherise Ratliff, 361-594-4608, ext. 118, cratliff@ranchhand.com. Website: www.ranchhand.com.

Raptor Series: Three-inch stainless round nerf bars, four-, five- and six-inch stainless/black cab length oval step tubes, four-, five- and six-inch stainless/black wheel-to-wheel oval step tubes, seven-inch stainless steel running boards, stainless truck bedrails. Contact: Mike McGinnis, 877-769-3765, ext. 303, mike@raptorseries.com. Website: www.raptorseries.com.

Retrax Truck Bed Covers: The complete line of Retrax retractable pickup bed covers are available. Contact: Andy Nephew, 701-746-5596, anephew@retrax.com. Website: www.retrax.com.

RK Sport Inc.: Fiberglass and carbon fiber: hoods, trunk spoilers and miscellaneous body parts. Urethane ground effects kit, body kits, bumpers, spoiler and small miscellaneous accessories. Contact: Sean Tito, 951-894-7883, sean@rksprot.com. Website: www.rksport.com.

Shining Monkey Corp.: Car polish, wax, wash, tire dressing, quick detailer, matte paint cleaner/protector and vinyl wrap cleaner/protector. Contact: Shining Monkey, 888-2656-8615, info@shiningmonkeycorp.com. Website: www.shiningmonkeycorp.com.

StreetGlow Inc.: LED lighting. Contact: Jack Panzarella, 973-709-9000, ext. 103, jackp@streetglow.com. Website: www.streetglow.com.

Strike Force Zebra: JK Wrangler half doors. Contact: Bill Ball, 661-310-7829, billb@strikeforcezebra.com. Website: www.strikeforcezebra.com.

Truck Accessories Group-LEER/Century/Raider/Pace Edwards: Includes Leer and Pace Edwards. The member companies are manufacturers of a wide variety of fiberglass, aluminum truck caps, tonneaus and retractable covers for pickups used in the truck cap, fleet and commercial industries. TAG products maximize hauling capacity for work trucks and fleets with versatile products. Contact: Patricia Stewart, 916-771-0196, pstewart@truckgroup.com. Website: www.truckgroup.com/brands.

UASG: Professional application by 3M Certified Graphic Installation Companies for self adhesive vinyl decals, specialty films and wraps on vehicles. Contact: Julie Martin, 888-579-9793, Feedback@uasg.org. Website: www.uasg.org.

Vossen Wheels: Vossen Wheels, 19- to 22-in. Contact: Jav, 305-463-7778, jav@vossenwheels.com. Website: www.vossenwheels.com.

VPR4X4 Bumpers: Custom-built off-road bumpers. Contact: Deyan Font, 888-847-3779, deyan@vpr4x4.com. Website: www.vpr4x4.com.

Weld Racing LLC: Weld Racing is featuring 17- and 20-in. wheels for trucks up to 14 in. wide, 17- and 19.5-in. wheels for dually trucks, and 15-, 17-, 18- and 20-in. wheels for high-performance cars up to 17.5 in. wide. Also featured are 16x6 forged trailer wheels that match the truck designs. All are forged aluminum and all are made in the USA. Contact: Gregory Smith, 816-423-5712, gsmith@weldracing.com. Website: www.weldracing.com.

Interior Components/Accessories

Alea Leather Specialist Inc.: Distributor and manufacturer of premium-quality leather seat covers and car accessory products throughout North America. Contact: www.alealeather.com/eng/news_detail.php?cat_id=1&id=114. Website: www.alealeather.com.

BedRug Inc.: BedRug or BedTred truck bedliner, TrailerWare interior protective wall covering kit, Jeep protective covering (similar to BedRug and BedTred). Contact: Ryan Herman, 734-372-8120, rherman@bedrug.com. Website: www.bedrug.com.

BOLT Locks by STRATTEC: Padlocks, receiver hitch locks, cable locks, spare tire locks, tailgate handle locks and toolbox retrofit handle kits. Contact: Casey Milano, 330-244-9980, casey@mcculloughpr.com. Website: www.boltlock.com.

Delta Tech Industries LLC: LED interior lights. Contact: Tom Ameduri, 909-673-1900, tom@deltalights.com. Website: www.deltalights.com.

Haltech Engine Management Systems: Wideband far kit with display. Contact: Steve Nichols, Steve@haltech.com, 760-598-1941. Website: www.haltech.com.

Intellitronix Corp.: Digital LED gauges and tachometers. Contact: Joe Young, 440-413-5003, joe.young@intellitronix.com. Website: www.intellitronix.com.

Monster Hooks Inc.: Monster Hook, Mini Monster Hook, The Ultimate Recovery Hook! Diesel Hex Flo Exhaust Tips. Contact: Marco Najarro, 408-313-0716, marco@monsterhooksinc.com. Website: www.monsterhooksinc.com.

RAM Mounting Systems: iPad, tablet, cell phone, laptop and netbook mounts. Contact: Jacob Parker, 206-763-8361, ext. 111, jacob.parker@rammount.com. Website: www.rammount.com.

StreetGlow Inc.: LED lighting. Contact: Jack Panzarella, 973-709-9000, ext. 103, jackp@streetglow.com. Website: www.streetglow.com.

Quiet Ride Solutions: AcoustiShield thermal acoustic auto insulation (pre-cut, ready-to-install kits) and firewall insulation panels for 1,200 popular cars and trucks. Contact: Timothy Cox, 209-942-4777, timcox@quietride.com. Website: www.quietride.com.

Roadwire: Leather interiors and sunroofs. Contact: Tracy Pena, tracyp@roadwire.com, 877-762-3947. Website: www.roadwire.com.

VDO Instrumentation & Accessories: VDO gauges and accessories. Contact: AnnaMaria Blose, 610-289-0488, annamaria.blose@continental-corporation.com. Website: www.vd-gauges.com.

XS Power Batteries: 0, 2, 4, and 8 AWG power and ground wire with accessories. Contact: Nathan Way, 888-497-7693, nathan@xspowerbatteries.com. Website: www.4XSPower.com.

Suspension/Brake Components

BMF Wheels: BMF leveling kits available for Chevy, Dodge, Ford, Toyota, Nissan and Jeep. Contact: Blake Ramthun, 888-313-2580, blake@bmfwheels.com. Website: www.bmfwheels.com.

E-Stopp: Aftermarket push-button electronic E-brake. Contact: Jonathan Mill, jmill@estopp.com, 562-602-2842.

Granatelli Motor Sports Inc.: ’10–’13 Camaro suspension and brake upgrades; ’79–’12 Mustang suspension and brake upgrades. Contact: J.R. Granatelli, 805-486-6644, jrgranatelli@granatellimotorsports.com. Website: www.granatellimotorsports.com.

Hellwig Products Co. Inc.: Sway bars, air springs. Contact: Melanie White, mwhite@hellwigproducts.com, 559-799-3642. Website: www.hellwigproducts.com.

MGP Caliper Covers: MGP Caliper Covers. Custom logo engravings and custom paint also available for approved candidates. Contact: Ben Wong, 877-995-0003, ben.wong@calipercovers.com. Website: www.calipercovers.com.

ProRYDE Suspension Systems: Lift and leveling kits, tunable front and rear ride height to achieve your exact look, suspension geometry components, adjustable camber/caster ball joints, pinion angle cam bolts, etc. Contact: Shawn Leibfried, 888-813-7933, shawn@northstarmfg.com. Website: www.proryde.com.

Road Magnet Performance Springs: Precision suspension springs. Contact: Mark Habicht, 410-686-9100, mark@roadmagnet.com. Website: www.roadmagnet.com.

Superlift Suspension Systems: Suspension lift and leveling systems and related off-road accessories for light truck, Jeep and SUV applications. Contact: Joey Arbogast, 318-397-3024, jarbogast@superlift.com. Website: www.superlift.com.

Other Products & Services

BMF Wheels: Available for Chevy, Dodge, Ford, Toyota, Nissan and Jeep, including 17x9, 18x9 and 20x9 in EZ-FIT wheel offerings for leveled and lifted applications, and 20x10, 22x9.5, 22x10.5 and 24x10.5 wheel offerings for lifted applications. Contact: Blake Ramthun, 888-313-2580, blake@bmfwheels.com. Website: www.bmfwheels.com.

DeatschWerks: Fuel pumps. Contact: Greg Brungardt, 405-217-0718, Greg@DeatschWerks.com. Website: www.DeatschWerks.com.

Excalibur Wheel Accessories/McLEAN Wire Wheels: Vintage wheels and wheel accessories. Contact: Robert Klippel, bob@excaliburwheel.com, 909-923-8300. Website: www.excaliburwheelaccessories.com. 

Extang/TruXedo/BedRug/UnderCover: Bed lights. Contact: Steve Kelley, 734-434-3516, skelley@extang.com. Website: www.extang.com.

Firestone Industrial Products: Complete suspension solutions that include Ride-Rite, Sport-Rite, Coil-Rite and Level-Rite air helper springs, plus the R4Tech hybrid air suspension system, designed to maximize the safe load-carrying capacity, stability and ride quality of cars, trucks and SUVs. Contact: Casey Milano, casey@mcculloughpr.com, 330-244-9980. Website: www.ride-rite.com.

Haltech Engine Management Systems: Wideband kits with display. Contact: Steve Nichols, Steve@haltech.com, 760-598-1941. Website: www.haltech.com.

Hornblasters Inc.: Air horns/train horns. Contact: Rigo, 813-783-8058, ext. 305, Rigo@HornBlasters.com, Website: www.HornBlasters.com.

Squash Performance: High-flow, in-tank dual and triple pump fuel systems for ’03+ Ram, ’10+ Camaro, Dodge Charger/Magnum/Challenger, Mazda Speed 3 and 6, Pontiac G8 and Lexus IS. Contact: Andy Quaas, 262-724-8035, aquaas@squashperformance.com. Website: squashperformance.com.

StreetGlow Inc.: LED lighting. Contact: Jack Panzarella, 973-709-9000, ext. 103, jackp@streetglow.com. Website: www.streetglow.com.

Truck Accessories Group-LEER/Century/Raider/Pace Edwards: Fiberglass caps and tonneaus, aluminum commercial caps, retractable tonneau covers. Contact: Patricia Stewart, 916-771-0196, pstewart@truckgroup.com. Website: www.truckgroup.com/brands.

	SBN volunteer Theresa Contreres removed underhood components so that the area could be painted black to conform to the project paint scheme.
	The front clip was among the many components that had to be removed prior to sanding and painting.
	With most of the components removed, the process of taping off the connectors and masking everything else began.
	Completely masked and prepped, the underhood area was painted.
	With everything reassembled, sisters Theresa Contreras and Sara Morosan of L&G Enterprises, stood next to the High Gear Mustang project, now sporting a black underhood paint job that looks like it was done at the factory.

For this year’s SEMA Show, Ford Motor Co. and SEMA have teamed up on a unique project: the SEMA Mustang Build Powered by Women. Under the direction of the SEMA Businesswomen’s Network (SBN) and built entirely by SBN members, the project is designed to shine the light on women working in the automotive aftermarket and encourage more women to pursue careers in the industry.

Donated by Ford Motor Co., the vehicle will be auctioned on eBay, with proceeds benefitting the SEMA Memorial Scholarship Fund, thereby helping to foster the industry’s next generation of leaders. The satin-black luxury Mustang concept, designed by Jennifer Seely of Ford and known as High Gear, was adopted after an intense period of Internet voting and an ambitious, detailed build schedule was developed.

The first to get their hands on the donated ’13 Mustang GT were SBN members Theresa Contreras and Sara Morosan of L&G Enterprises in San Dimas, California. L&G is an award-winning, family-owned, full-service paint and body shop that has developed a national reputation for custom paint and design. L&G’s work has appeared on more than a dozen magazine covers and at many custom car shows, and its team regularly builds customs that end up at the SEMA Show.

Contreras is an experienced car builder and custom painter, and Morosan is L&G’s sales manager. Both grew up working in the L&G body shop and clearly relished the job at hand.

The High Gear Mustang GT came in white from the factory but is slated to receive a custom black-satin exterior finish. The paint is scheduled to be the last job in the build sequence, but because the plan includes adding underhood performance mods, the engine compartment needed to be painted first. That meant that all of the engine accessories bolted to the fenderwells, firewall and framerails had to be removed, along with the entire front clip, before the engine compartment could be painted black.

Contreras and Morosan, working as a team, took on the tedious job of removing everything that might hinder a perfect underhood paint job, which included removing components, such as the battery and battery box, air intake and air filter, brake line plumbing, hood-release mechanism, CPU, wipers and washer fluid reservoir, driving lights and fog lights and the hood and entire front bumper, plus all of the assorted pieces of insulation and heat shielding, among other things. The hardware was meticulously labeled and stored in plastic bags, and all of the connectors and fasteners were taped off and labeled.

After a few hours of work, the white engine compartment walls and frame rails were completely exposed. Factory stickers and labels were removed, then the engine and remaining lines and wiring harness pieces were masked off and all of the white underhood surfaces were sanded and wiped down with tack cloth prior to painting.

The next stop was the spray booth, where Contreras carefully sprayed the underhood area, paying special attention to all the little nooks and crannies that might show if any white remained visible. When she was satisfied, the paint was allowed to dry, and all of the pieces that had been removed for painting were carefully re-installed, including the factory labels. The end result was an all-black underhood area that looked exactly as if it had come that way from the factory.

Next stop for the High Gear Mustang will be the shop at Source Interlink Media headquarters, where other teams of SBN-member volunteer workers will add more custom touches, such as quilted suede seats and Rosegold chrome accents throughout the exterior and interior. They will also make modifications to the engine, undercarriage, drivetrain and sound system. When the process is complete, the car will come back to L&G for the exterior paint work.

The SBN vehicle build task force is comprised of Task Force Chair Rose Kawasaki (Exports International), Project Vehicle Coordinator Sherry Kollien (Ford Motor Co.), Assembly Coordinator Kellie Colf (Colf Creative Resources), PR/Media Coordinator Camee Edelbrock (Schiefer Media Inc.) and Product Coordinator Susan Carpenter (JR Products). Advisors include Mike Spagnola (Street Scene Equipment), Joel Ayres (Bedslide/Takit) and Marla Moore (Hypertech).

To learn more about the SEMA Mustang Build Powered by Women, visit www.SEMA.org/SEMAmustangbuild, or contact Bryan Harrison, SEMA's senior manager of councils and the build's project manager at bryanh@sema.org. 

	SBN volunteer Theresa Contreres removed underhood components so that the area could be painted black to conform to the project paint scheme.
	The front clip was among the many components that had to be removed prior to sanding and painting.
	With most of the components removed, the process of taping off the connectors and masking everything else began.
	Completely masked and prepped, the underhood area was painted.
	With everything reassembled, sisters Theresa Contreras and Sara Morosan of L&G Enterprises, stood next to the High Gear Mustang project, now sporting a black underhood paint job that looks like it was done at the factory.

For this year’s SEMA Show, Ford Motor Co. and SEMA have teamed up on a unique project: the SEMA Mustang Build Powered by Women. Under the direction of the SEMA Businesswomen’s Network (SBN) and built entirely by SBN members, the project is designed to shine the light on women working in the automotive aftermarket and encourage more women to pursue careers in the industry.

Donated by Ford Motor Co., the vehicle will be auctioned on eBay, with proceeds benefitting the SEMA Memorial Scholarship Fund, thereby helping to foster the industry’s next generation of leaders. The satin-black luxury Mustang concept, designed by Jennifer Seely of Ford and known as High Gear, was adopted after an intense period of Internet voting and an ambitious, detailed build schedule was developed.

The first to get their hands on the donated ’13 Mustang GT were SBN members Theresa Contreras and Sara Morosan of L&G Enterprises in San Dimas, California. L&G is an award-winning, family-owned, full-service paint and body shop that has developed a national reputation for custom paint and design. L&G’s work has appeared on more than a dozen magazine covers and at many custom car shows, and its team regularly builds customs that end up at the SEMA Show.

Contreras is an experienced car builder and custom painter, and Morosan is L&G’s sales manager. Both grew up working in the L&G body shop and clearly relished the job at hand.

The High Gear Mustang GT came in white from the factory but is slated to receive a custom black-satin exterior finish. The paint is scheduled to be the last job in the build sequence, but because the plan includes adding underhood performance mods, the engine compartment needed to be painted first. That meant that all of the engine accessories bolted to the fenderwells, firewall and framerails had to be removed, along with the entire front clip, before the engine compartment could be painted black.

Contreras and Morosan, working as a team, took on the tedious job of removing everything that might hinder a perfect underhood paint job, which included removing components, such as the battery and battery box, air intake and air filter, brake line plumbing, hood-release mechanism, CPU, wipers and washer fluid reservoir, driving lights and fog lights and the hood and entire front bumper, plus all of the assorted pieces of insulation and heat shielding, among other things. The hardware was meticulously labeled and stored in plastic bags, and all of the connectors and fasteners were taped off and labeled.

After a few hours of work, the white engine compartment walls and frame rails were completely exposed. Factory stickers and labels were removed, then the engine and remaining lines and wiring harness pieces were masked off and all of the white underhood surfaces were sanded and wiped down with tack cloth prior to painting.

The next stop was the spray booth, where Contreras carefully sprayed the underhood area, paying special attention to all the little nooks and crannies that might show if any white remained visible. When she was satisfied, the paint was allowed to dry, and all of the pieces that had been removed for painting were carefully re-installed, including the factory labels. The end result was an all-black underhood area that looked exactly as if it had come that way from the factory.

Next stop for the High Gear Mustang will be the shop at Source Interlink Media headquarters, where other teams of SBN-member volunteer workers will add more custom touches, such as quilted suede seats and Rosegold chrome accents throughout the exterior and interior. They will also make modifications to the engine, undercarriage, drivetrain and sound system. When the process is complete, the car will come back to L&G for the exterior paint work.

The SBN vehicle build task force is comprised of Task Force Chair Rose Kawasaki (Exports International), Project Vehicle Coordinator Sherry Kollien (Ford Motor Co.), Assembly Coordinator Kellie Colf (Colf Creative Resources), PR/Media Coordinator Camee Edelbrock (Schiefer Media Inc.) and Product Coordinator Susan Carpenter (JR Products). Advisors include Mike Spagnola (Street Scene Equipment), Joel Ayres (Bedslide/Takit) and Marla Moore (Hypertech).

To learn more about the SEMA Mustang Build Powered by Women, visit www.SEMA.org/SEMAmustangbuild, or contact Bryan Harrison, SEMA's senior manager of councils and the build's project manager at bryanh@sema.org. 

	SBN volunteer Theresa Contreres removed underhood components so that the area could be painted black to conform to the project paint scheme.
	The front clip was among the many components that had to be removed prior to sanding and painting.
	With most of the components removed, the process of taping off the connectors and masking everything else began.
	Completely masked and prepped, the underhood area was painted.
	With everything reassembled, sisters Theresa Contreras and Sara Morosan of L&G Enterprises, stood next to the High Gear Mustang project, now sporting a black underhood paint job that looks like it was done at the factory.

For this year’s SEMA Show, Ford Motor Co. and SEMA have teamed up on a unique project: the SEMA Mustang Build Powered by Women. Under the direction of the SEMA Businesswomen’s Network (SBN) and built entirely by SBN members, the project is designed to shine the light on women working in the automotive aftermarket and encourage more women to pursue careers in the industry.

Donated by Ford Motor Co., the vehicle will be auctioned on eBay, with proceeds benefitting the SEMA Memorial Scholarship Fund, thereby helping to foster the industry’s next generation of leaders. The satin-black luxury Mustang concept, designed by Jennifer Seely of Ford and known as High Gear, was adopted after an intense period of Internet voting and an ambitious, detailed build schedule was developed.

The first to get their hands on the donated ’13 Mustang GT were SBN members Theresa Contreras and Sara Morosan of L&G Enterprises in San Dimas, California. L&G is an award-winning, family-owned, full-service paint and body shop that has developed a national reputation for custom paint and design. L&G’s work has appeared on more than a dozen magazine covers and at many custom car shows, and its team regularly builds customs that end up at the SEMA Show.

Contreras is an experienced car builder and custom painter, and Morosan is L&G’s sales manager. Both grew up working in the L&G body shop and clearly relished the job at hand.

The High Gear Mustang GT came in white from the factory but is slated to receive a custom black-satin exterior finish. The paint is scheduled to be the last job in the build sequence, but because the plan includes adding underhood performance mods, the engine compartment needed to be painted first. That meant that all of the engine accessories bolted to the fenderwells, firewall and framerails had to be removed, along with the entire front clip, before the engine compartment could be painted black.

Contreras and Morosan, working as a team, took on the tedious job of removing everything that might hinder a perfect underhood paint job, which included removing components, such as the battery and battery box, air intake and air filter, brake line plumbing, hood-release mechanism, CPU, wipers and washer fluid reservoir, driving lights and fog lights and the hood and entire front bumper, plus all of the assorted pieces of insulation and heat shielding, among other things. The hardware was meticulously labeled and stored in plastic bags, and all of the connectors and fasteners were taped off and labeled.

After a few hours of work, the white engine compartment walls and frame rails were completely exposed. Factory stickers and labels were removed, then the engine and remaining lines and wiring harness pieces were masked off and all of the white underhood surfaces were sanded and wiped down with tack cloth prior to painting.

The next stop was the spray booth, where Contreras carefully sprayed the underhood area, paying special attention to all the little nooks and crannies that might show if any white remained visible. When she was satisfied, the paint was allowed to dry, and all of the pieces that had been removed for painting were carefully re-installed, including the factory labels. The end result was an all-black underhood area that looked exactly as if it had come that way from the factory.

Next stop for the High Gear Mustang will be the shop at Source Interlink Media headquarters, where other teams of SBN-member volunteer workers will add more custom touches, such as quilted suede seats and Rosegold chrome accents throughout the exterior and interior. They will also make modifications to the engine, undercarriage, drivetrain and sound system. When the process is complete, the car will come back to L&G for the exterior paint work.

The SBN vehicle build task force is comprised of Task Force Chair Rose Kawasaki (Exports International), Project Vehicle Coordinator Sherry Kollien (Ford Motor Co.), Assembly Coordinator Kellie Colf (Colf Creative Resources), PR/Media Coordinator Camee Edelbrock (Schiefer Media Inc.) and Product Coordinator Susan Carpenter (JR Products). Advisors include Mike Spagnola (Street Scene Equipment), Joel Ayres (Bedslide/Takit) and Marla Moore (Hypertech).

To learn more about the SEMA Mustang Build Powered by Women, visit www.SEMA.org/SEMAmustangbuild, or contact Bryan Harrison, SEMA's senior manager of councils and the build's project manager at bryanh@sema.org. 

	SBN volunteer Theresa Contreres removed underhood components so that the area could be painted black to conform to the project paint scheme.
	The front clip was among the many components that had to be removed prior to sanding and painting.
	With most of the components removed, the process of taping off the connectors and masking everything else began.
	Completely masked and prepped, the underhood area was painted.
	With everything reassembled, sisters Theresa Contreras and Sara Morosan of L&G Enterprises, stood next to the High Gear Mustang project, now sporting a black underhood paint job that looks like it was done at the factory.

For this year’s SEMA Show, Ford Motor Co. and SEMA have teamed up on a unique project: the SEMA Mustang Build Powered by Women. Under the direction of the SEMA Businesswomen’s Network (SBN) and built entirely by SBN members, the project is designed to shine the light on women working in the automotive aftermarket and encourage more women to pursue careers in the industry.

Donated by Ford Motor Co., the vehicle will be auctioned on eBay, with proceeds benefitting the SEMA Memorial Scholarship Fund, thereby helping to foster the industry’s next generation of leaders. The satin-black luxury Mustang concept, designed by Jennifer Seely of Ford and known as High Gear, was adopted after an intense period of Internet voting and an ambitious, detailed build schedule was developed.

The first to get their hands on the donated ’13 Mustang GT were SBN members Theresa Contreras and Sara Morosan of L&G Enterprises in San Dimas, California. L&G is an award-winning, family-owned, full-service paint and body shop that has developed a national reputation for custom paint and design. L&G’s work has appeared on more than a dozen magazine covers and at many custom car shows, and its team regularly builds customs that end up at the SEMA Show.

Contreras is an experienced car builder and custom painter, and Morosan is L&G’s sales manager. Both grew up working in the L&G body shop and clearly relished the job at hand.

The High Gear Mustang GT came in white from the factory but is slated to receive a custom black-satin exterior finish. The paint is scheduled to be the last job in the build sequence, but because the plan includes adding underhood performance mods, the engine compartment needed to be painted first. That meant that all of the engine accessories bolted to the fenderwells, firewall and framerails had to be removed, along with the entire front clip, before the engine compartment could be painted black.

Contreras and Morosan, working as a team, took on the tedious job of removing everything that might hinder a perfect underhood paint job, which included removing components, such as the battery and battery box, air intake and air filter, brake line plumbing, hood-release mechanism, CPU, wipers and washer fluid reservoir, driving lights and fog lights and the hood and entire front bumper, plus all of the assorted pieces of insulation and heat shielding, among other things. The hardware was meticulously labeled and stored in plastic bags, and all of the connectors and fasteners were taped off and labeled.

After a few hours of work, the white engine compartment walls and frame rails were completely exposed. Factory stickers and labels were removed, then the engine and remaining lines and wiring harness pieces were masked off and all of the white underhood surfaces were sanded and wiped down with tack cloth prior to painting.

The next stop was the spray booth, where Contreras carefully sprayed the underhood area, paying special attention to all the little nooks and crannies that might show if any white remained visible. When she was satisfied, the paint was allowed to dry, and all of the pieces that had been removed for painting were carefully re-installed, including the factory labels. The end result was an all-black underhood area that looked exactly as if it had come that way from the factory.

Next stop for the High Gear Mustang will be the shop at Source Interlink Media headquarters, where other teams of SBN-member volunteer workers will add more custom touches, such as quilted suede seats and Rosegold chrome accents throughout the exterior and interior. They will also make modifications to the engine, undercarriage, drivetrain and sound system. When the process is complete, the car will come back to L&G for the exterior paint work.

The SBN vehicle build task force is comprised of Task Force Chair Rose Kawasaki (Exports International), Project Vehicle Coordinator Sherry Kollien (Ford Motor Co.), Assembly Coordinator Kellie Colf (Colf Creative Resources), PR/Media Coordinator Camee Edelbrock (Schiefer Media Inc.) and Product Coordinator Susan Carpenter (JR Products). Advisors include Mike Spagnola (Street Scene Equipment), Joel Ayres (Bedslide/Takit) and Marla Moore (Hypertech).

To learn more about the SEMA Mustang Build Powered by Women, visit www.SEMA.org/SEMAmustangbuild, or contact Bryan Harrison, SEMA's senior manager of councils and the build's project manager at bryanh@sema.org. 

	SBN volunteer Theresa Contreres removed underhood components so that the area could be painted black to conform to the project paint scheme.
	The front clip was among the many components that had to be removed prior to sanding and painting.
	With most of the components removed, the process of taping off the connectors and masking everything else began.
	Completely masked and prepped, the underhood area was painted.
	With everything reassembled, sisters Theresa Contreras and Sara Morosan of L&G Enterprises, stood next to the High Gear Mustang project, now sporting a black underhood paint job that looks like it was done at the factory.

For this year’s SEMA Show, Ford Motor Co. and SEMA have teamed up on a unique project: the SEMA Mustang Build Powered by Women. Under the direction of the SEMA Businesswomen’s Network (SBN) and built entirely by SBN members, the project is designed to shine the light on women working in the automotive aftermarket and encourage more women to pursue careers in the industry.

Donated by Ford Motor Co., the vehicle will be auctioned on eBay, with proceeds benefitting the SEMA Memorial Scholarship Fund, thereby helping to foster the industry’s next generation of leaders. The satin-black luxury Mustang concept, designed by Jennifer Seely of Ford and known as High Gear, was adopted after an intense period of Internet voting and an ambitious, detailed build schedule was developed.

The first to get their hands on the donated ’13 Mustang GT were SBN members Theresa Contreras and Sara Morosan of L&G Enterprises in San Dimas, California. L&G is an award-winning, family-owned, full-service paint and body shop that has developed a national reputation for custom paint and design. L&G’s work has appeared on more than a dozen magazine covers and at many custom car shows, and its team regularly builds customs that end up at the SEMA Show.

Contreras is an experienced car builder and custom painter, and Morosan is L&G’s sales manager. Both grew up working in the L&G body shop and clearly relished the job at hand.

The High Gear Mustang GT came in white from the factory but is slated to receive a custom black-satin exterior finish. The paint is scheduled to be the last job in the build sequence, but because the plan includes adding underhood performance mods, the engine compartment needed to be painted first. That meant that all of the engine accessories bolted to the fenderwells, firewall and framerails had to be removed, along with the entire front clip, before the engine compartment could be painted black.

Contreras and Morosan, working as a team, took on the tedious job of removing everything that might hinder a perfect underhood paint job, which included removing components, such as the battery and battery box, air intake and air filter, brake line plumbing, hood-release mechanism, CPU, wipers and washer fluid reservoir, driving lights and fog lights and the hood and entire front bumper, plus all of the assorted pieces of insulation and heat shielding, among other things. The hardware was meticulously labeled and stored in plastic bags, and all of the connectors and fasteners were taped off and labeled.

After a few hours of work, the white engine compartment walls and frame rails were completely exposed. Factory stickers and labels were removed, then the engine and remaining lines and wiring harness pieces were masked off and all of the white underhood surfaces were sanded and wiped down with tack cloth prior to painting.

The next stop was the spray booth, where Contreras carefully sprayed the underhood area, paying special attention to all the little nooks and crannies that might show if any white remained visible. When she was satisfied, the paint was allowed to dry, and all of the pieces that had been removed for painting were carefully re-installed, including the factory labels. The end result was an all-black underhood area that looked exactly as if it had come that way from the factory.

Next stop for the High Gear Mustang will be the shop at Source Interlink Media headquarters, where other teams of SBN-member volunteer workers will add more custom touches, such as quilted suede seats and Rosegold chrome accents throughout the exterior and interior. They will also make modifications to the engine, undercarriage, drivetrain and sound system. When the process is complete, the car will come back to L&G for the exterior paint work.

The SBN vehicle build task force is comprised of Task Force Chair Rose Kawasaki (Exports International), Project Vehicle Coordinator Sherry Kollien (Ford Motor Co.), Assembly Coordinator Kellie Colf (Colf Creative Resources), PR/Media Coordinator Camee Edelbrock (Schiefer Media Inc.) and Product Coordinator Susan Carpenter (JR Products). Advisors include Mike Spagnola (Street Scene Equipment), Joel Ayres (Bedslide/Takit) and Marla Moore (Hypertech).

To learn more about the SEMA Mustang Build Powered by Women, visit www.SEMA.org/SEMAmustangbuild, or contact Bryan Harrison, SEMA's senior manager of councils and the build's project manager at bryanh@sema.org. 

	The First-Time and Featured Exhibitors section includes hundreds of exhibitors representing a variety of market categories.

Located alongside the Ideas Alive: Featuring the New Products Showcase in the upper level of South Hall, the First-Time and Featured Exhibitors Section that debuted at last year’s SEMA Show will return in 2012. With nearly 2,000 manufacturers exhibiting throughout the SEMA Show, the First-Time and Featured Exhibitors section serves as an easy and convenient location for buyers to hone in on hundreds of new and emerging manufacturers who are exhibiting at the Show for the first time.

“Last year’s First-Time and Featured Exhibitors Section proved to be successful at connecting attendees with new exhibitors,” said Peter MacGillivray, SEMA vice president of communications and events. “Buyers will again be able to meet with new exhibitors quickly and easily, while conveniently stopping by the New Products Showcase at the same time.”

The Ideas Alive: Featuring the New Products Showcase is among one of the most visited attractions at the SEMA Show. With hundreds of products featured in display cases, the area helps attendees to get an overview of what’s new and debuting at the Show.

“Buyers and media often make the New Products Showcase their first stop, visiting the area even before the Show opens on Tuesday morning,” said MacGillivray. “Visitors will note the products that interest them in the Showcase and create a list of exhibitors that they want to visit. This often becomes their plan for the week.”

The First-Time and Featured Exhibitors section includes hundreds of exhibitors representing a variety of market categories. To view a complete list of exhibitors and their booth locations, visit www.SEMAShow.com.

The SEMA Show is a trade-only event not open to the general public. This year’s event takes place Tuesday–Friday, October 30–November 2, 2012, at the Las Vegas Convention Center.

	The First-Time and Featured Exhibitors section includes hundreds of exhibitors representing a variety of market categories.

Located alongside the Ideas Alive: Featuring the New Products Showcase in the upper level of South Hall, the First-Time and Featured Exhibitors Section that debuted at last year’s SEMA Show will return in 2012. With nearly 2,000 manufacturers exhibiting throughout the SEMA Show, the First-Time and Featured Exhibitors section serves as an easy and convenient location for buyers to hone in on hundreds of new and emerging manufacturers who are exhibiting at the Show for the first time.

“Last year’s First-Time and Featured Exhibitors Section proved to be successful at connecting attendees with new exhibitors,” said Peter MacGillivray, SEMA vice president of communications and events. “Buyers will again be able to meet with new exhibitors quickly and easily, while conveniently stopping by the New Products Showcase at the same time.”

The Ideas Alive: Featuring the New Products Showcase is among one of the most visited attractions at the SEMA Show. With hundreds of products featured in display cases, the area helps attendees to get an overview of what’s new and debuting at the Show.

“Buyers and media often make the New Products Showcase their first stop, visiting the area even before the Show opens on Tuesday morning,” said MacGillivray. “Visitors will note the products that interest them in the Showcase and create a list of exhibitors that they want to visit. This often becomes their plan for the week.”

The First-Time and Featured Exhibitors section includes hundreds of exhibitors representing a variety of market categories. To view a complete list of exhibitors and their booth locations, visit www.SEMAShow.com.

The SEMA Show is a trade-only event not open to the general public. This year’s event takes place Tuesday–Friday, October 30–November 2, 2012, at the Las Vegas Convention Center.

	The First-Time and Featured Exhibitors section includes hundreds of exhibitors representing a variety of market categories.

Located alongside the Ideas Alive: Featuring the New Products Showcase in the upper level of South Hall, the First-Time and Featured Exhibitors Section that debuted at last year’s SEMA Show will return in 2012. With nearly 2,000 manufacturers exhibiting throughout the SEMA Show, the First-Time and Featured Exhibitors section serves as an easy and convenient location for buyers to hone in on hundreds of new and emerging manufacturers who are exhibiting at the Show for the first time.

“Last year’s First-Time and Featured Exhibitors Section proved to be successful at connecting attendees with new exhibitors,” said Peter MacGillivray, SEMA vice president of communications and events. “Buyers will again be able to meet with new exhibitors quickly and easily, while conveniently stopping by the New Products Showcase at the same time.”

The Ideas Alive: Featuring the New Products Showcase is among one of the most visited attractions at the SEMA Show. With hundreds of products featured in display cases, the area helps attendees to get an overview of what’s new and debuting at the Show.

“Buyers and media often make the New Products Showcase their first stop, visiting the area even before the Show opens on Tuesday morning,” said MacGillivray. “Visitors will note the products that interest them in the Showcase and create a list of exhibitors that they want to visit. This often becomes their plan for the week.”

The First-Time and Featured Exhibitors section includes hundreds of exhibitors representing a variety of market categories. To view a complete list of exhibitors and their booth locations, visit www.SEMAShow.com.

The SEMA Show is a trade-only event not open to the general public. This year’s event takes place Tuesday–Friday, October 30–November 2, 2012, at the Las Vegas Convention Center.