Tue, 05/01/2012 - 08:08

SEMA News—May 2012

Legislative & Technical Affairs
By Steve McDonald

Washington Enacts Law to Exempt Restoration and Custom Shops From Written Estimate Requirement

SEMA Member Takes Active Role in Legislative Process

  State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right).
Kevin Jack (center) of SEMA member Thunder Road Street Rods & Customs celebrates the bill signing with Washington State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right). 
   
A SEMA-supported bill to exempt restoration and custom shops from the requirement that they provide written estimates for the repair of any vehicle that qualifies for a “horseless carriage” or “collector vehicle” license plate or is a “parts car,” “street rod” or “custom vehicle” was signed into law by Governor Chris Gregoire. Effective January 1, 2013, the new law will allow restoration and custom shops to bill at least every two weeks on a time-and-materials basis.

Under Washington law, a “horseless carriage” is a vehicle that is more than 40 years old and is owned and operated as a collector vehicle; a “collector vehicle” is any motor vehicle that is more than 30 years old; a “custom vehicle” is any motor vehicle that is at least 30 years old and of a model year after 1948 or was manufactured to resemble a vehicle at least 30 years old and of a model year after 1948 and has alterations to one or more of the major component parts; a “parts car” is a motor vehicle that is owned by a collector to furnish parts for restoration or maintenance; and a “street rod” is a motor vehicle that is a 1948 or older vehicle or a vehicle manufactured after 1948 to resemble a vehicle manufactured before 1949 and has alterations to one or more of the major component parts.

“Customers of restoration and customization shops have the right to be notified of costs in a timely fashion,” said SEMA Vice President for Government Affairs Steve McDonald.

“Under a SEMA-drafted provision to the new law, restoration and custom shops will be allowed to bill at least every two weeks on a time-and-materials basis. Shops would be able to accurately inform customers of actual costs and materials, removing the vagueness associated with shops attempting to guess probable time for unique tasks and probable costs for unique and in some cases yet-to-be-fabricated, parts.”

  Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
Surrounded by members of the Washington state custom and restoration business community, Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
   
The new law is the product of months of consultation with state legislators, regulators and the local business community and was the brainchild of Kevin Jack of SEMA member Thunder Road Street Rods & Customs in Benton City, Washington.

“It was an honor testifying in committee in favor of the bill and being involved in the political process to create positive change,” Jack said.

“This new law, as sponsored by Senators Mike Carrell and Jerome Delvin, recognizes that restoration and custom shops constitute a small portion of shops that work on vehicles and fulfill a unique niche that does not conform to that of standard repair shops. The law will allow us to bill our customers fairly and on a timely basis for the actual work done on these unique vehicles without the unreasonable expectation created by adherence to a written estimate requirement.”

Similar legislation is currently pending in New York and New Jersey and will continue to be pursued by SEMA in states that regulate restoration and custom shops under the same rules that govern straight repair businesses. 

Tue, 05/01/2012 - 08:08

SEMA News—May 2012

Legislative & Technical Affairs
By Steve McDonald

Washington Enacts Law to Exempt Restoration and Custom Shops From Written Estimate Requirement

SEMA Member Takes Active Role in Legislative Process

  State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right).
Kevin Jack (center) of SEMA member Thunder Road Street Rods & Customs celebrates the bill signing with Washington State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right). 
   
A SEMA-supported bill to exempt restoration and custom shops from the requirement that they provide written estimates for the repair of any vehicle that qualifies for a “horseless carriage” or “collector vehicle” license plate or is a “parts car,” “street rod” or “custom vehicle” was signed into law by Governor Chris Gregoire. Effective January 1, 2013, the new law will allow restoration and custom shops to bill at least every two weeks on a time-and-materials basis.

Under Washington law, a “horseless carriage” is a vehicle that is more than 40 years old and is owned and operated as a collector vehicle; a “collector vehicle” is any motor vehicle that is more than 30 years old; a “custom vehicle” is any motor vehicle that is at least 30 years old and of a model year after 1948 or was manufactured to resemble a vehicle at least 30 years old and of a model year after 1948 and has alterations to one or more of the major component parts; a “parts car” is a motor vehicle that is owned by a collector to furnish parts for restoration or maintenance; and a “street rod” is a motor vehicle that is a 1948 or older vehicle or a vehicle manufactured after 1948 to resemble a vehicle manufactured before 1949 and has alterations to one or more of the major component parts.

“Customers of restoration and customization shops have the right to be notified of costs in a timely fashion,” said SEMA Vice President for Government Affairs Steve McDonald.

“Under a SEMA-drafted provision to the new law, restoration and custom shops will be allowed to bill at least every two weeks on a time-and-materials basis. Shops would be able to accurately inform customers of actual costs and materials, removing the vagueness associated with shops attempting to guess probable time for unique tasks and probable costs for unique and in some cases yet-to-be-fabricated, parts.”

  Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
Surrounded by members of the Washington state custom and restoration business community, Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
   
The new law is the product of months of consultation with state legislators, regulators and the local business community and was the brainchild of Kevin Jack of SEMA member Thunder Road Street Rods & Customs in Benton City, Washington.

“It was an honor testifying in committee in favor of the bill and being involved in the political process to create positive change,” Jack said.

“This new law, as sponsored by Senators Mike Carrell and Jerome Delvin, recognizes that restoration and custom shops constitute a small portion of shops that work on vehicles and fulfill a unique niche that does not conform to that of standard repair shops. The law will allow us to bill our customers fairly and on a timely basis for the actual work done on these unique vehicles without the unreasonable expectation created by adherence to a written estimate requirement.”

Similar legislation is currently pending in New York and New Jersey and will continue to be pursued by SEMA in states that regulate restoration and custom shops under the same rules that govern straight repair businesses. 

Tue, 05/01/2012 - 08:08

SEMA News—May 2012

Legislative & Technical Affairs
By Steve McDonald

Washington Enacts Law to Exempt Restoration and Custom Shops From Written Estimate Requirement

SEMA Member Takes Active Role in Legislative Process

  State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right).
Kevin Jack (center) of SEMA member Thunder Road Street Rods & Customs celebrates the bill signing with Washington State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right). 
   
A SEMA-supported bill to exempt restoration and custom shops from the requirement that they provide written estimates for the repair of any vehicle that qualifies for a “horseless carriage” or “collector vehicle” license plate or is a “parts car,” “street rod” or “custom vehicle” was signed into law by Governor Chris Gregoire. Effective January 1, 2013, the new law will allow restoration and custom shops to bill at least every two weeks on a time-and-materials basis.

Under Washington law, a “horseless carriage” is a vehicle that is more than 40 years old and is owned and operated as a collector vehicle; a “collector vehicle” is any motor vehicle that is more than 30 years old; a “custom vehicle” is any motor vehicle that is at least 30 years old and of a model year after 1948 or was manufactured to resemble a vehicle at least 30 years old and of a model year after 1948 and has alterations to one or more of the major component parts; a “parts car” is a motor vehicle that is owned by a collector to furnish parts for restoration or maintenance; and a “street rod” is a motor vehicle that is a 1948 or older vehicle or a vehicle manufactured after 1948 to resemble a vehicle manufactured before 1949 and has alterations to one or more of the major component parts.

“Customers of restoration and customization shops have the right to be notified of costs in a timely fashion,” said SEMA Vice President for Government Affairs Steve McDonald.

“Under a SEMA-drafted provision to the new law, restoration and custom shops will be allowed to bill at least every two weeks on a time-and-materials basis. Shops would be able to accurately inform customers of actual costs and materials, removing the vagueness associated with shops attempting to guess probable time for unique tasks and probable costs for unique and in some cases yet-to-be-fabricated, parts.”

  Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
Surrounded by members of the Washington state custom and restoration business community, Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
   
The new law is the product of months of consultation with state legislators, regulators and the local business community and was the brainchild of Kevin Jack of SEMA member Thunder Road Street Rods & Customs in Benton City, Washington.

“It was an honor testifying in committee in favor of the bill and being involved in the political process to create positive change,” Jack said.

“This new law, as sponsored by Senators Mike Carrell and Jerome Delvin, recognizes that restoration and custom shops constitute a small portion of shops that work on vehicles and fulfill a unique niche that does not conform to that of standard repair shops. The law will allow us to bill our customers fairly and on a timely basis for the actual work done on these unique vehicles without the unreasonable expectation created by adherence to a written estimate requirement.”

Similar legislation is currently pending in New York and New Jersey and will continue to be pursued by SEMA in states that regulate restoration and custom shops under the same rules that govern straight repair businesses. 

Tue, 05/01/2012 - 08:08

SEMA News—May 2012

Legislative & Technical Affairs
By Steve McDonald

Washington Enacts Law to Exempt Restoration and Custom Shops From Written Estimate Requirement

SEMA Member Takes Active Role in Legislative Process

  State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right).
Kevin Jack (center) of SEMA member Thunder Road Street Rods & Customs celebrates the bill signing with Washington State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right). 
   
A SEMA-supported bill to exempt restoration and custom shops from the requirement that they provide written estimates for the repair of any vehicle that qualifies for a “horseless carriage” or “collector vehicle” license plate or is a “parts car,” “street rod” or “custom vehicle” was signed into law by Governor Chris Gregoire. Effective January 1, 2013, the new law will allow restoration and custom shops to bill at least every two weeks on a time-and-materials basis.

Under Washington law, a “horseless carriage” is a vehicle that is more than 40 years old and is owned and operated as a collector vehicle; a “collector vehicle” is any motor vehicle that is more than 30 years old; a “custom vehicle” is any motor vehicle that is at least 30 years old and of a model year after 1948 or was manufactured to resemble a vehicle at least 30 years old and of a model year after 1948 and has alterations to one or more of the major component parts; a “parts car” is a motor vehicle that is owned by a collector to furnish parts for restoration or maintenance; and a “street rod” is a motor vehicle that is a 1948 or older vehicle or a vehicle manufactured after 1948 to resemble a vehicle manufactured before 1949 and has alterations to one or more of the major component parts.

“Customers of restoration and customization shops have the right to be notified of costs in a timely fashion,” said SEMA Vice President for Government Affairs Steve McDonald.

“Under a SEMA-drafted provision to the new law, restoration and custom shops will be allowed to bill at least every two weeks on a time-and-materials basis. Shops would be able to accurately inform customers of actual costs and materials, removing the vagueness associated with shops attempting to guess probable time for unique tasks and probable costs for unique and in some cases yet-to-be-fabricated, parts.”

  Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
Surrounded by members of the Washington state custom and restoration business community, Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
   
The new law is the product of months of consultation with state legislators, regulators and the local business community and was the brainchild of Kevin Jack of SEMA member Thunder Road Street Rods & Customs in Benton City, Washington.

“It was an honor testifying in committee in favor of the bill and being involved in the political process to create positive change,” Jack said.

“This new law, as sponsored by Senators Mike Carrell and Jerome Delvin, recognizes that restoration and custom shops constitute a small portion of shops that work on vehicles and fulfill a unique niche that does not conform to that of standard repair shops. The law will allow us to bill our customers fairly and on a timely basis for the actual work done on these unique vehicles without the unreasonable expectation created by adherence to a written estimate requirement.”

Similar legislation is currently pending in New York and New Jersey and will continue to be pursued by SEMA in states that regulate restoration and custom shops under the same rules that govern straight repair businesses. 

Thu, 04/26/2012 - 16:56

 

  new products
  SEMA's www.semaphotos.com website includes more than 1,700 photos of new products featured in the New Products Showcase at the 2011 SEMA Show.

You know that your product is fantastic, and SEMA would like to present an opportunity to get more hobbyists interested in your latest and greatest.

A major enthusiast publication has requested new product announcements and press releases from SEMA members, regardless of product type.

To take advantage of this opportunity, e-mail Della Domingo at dellad@sema.org and submit your product information as a pdf or Word document.

Looking for products? SEMA's www.semaphotos.com website includes more than 1,700 photos of new products featured in the New Products Showcase at the 2011 SEMA Show. The products can be viewed page by page, or visitors can search by category, including diesel performance, off-road, mobile electronics, racing/motorsports, restyling, street rod/hot rod/custom, street performance and more.

In addition to the high-resolution photos, the photo pages include the product's name, brief description and contact information for the company. To get started, visit www.semaphotos.com.

Thu, 04/26/2012 - 16:56

 

  new products
  SEMA's www.semaphotos.com website includes more than 1,700 photos of new products featured in the New Products Showcase at the 2011 SEMA Show.

You know that your product is fantastic, and SEMA would like to present an opportunity to get more hobbyists interested in your latest and greatest.

A major enthusiast publication has requested new product announcements and press releases from SEMA members, regardless of product type.

To take advantage of this opportunity, e-mail Della Domingo at dellad@sema.org and submit your product information as a pdf or Word document.

Looking for products? SEMA's www.semaphotos.com website includes more than 1,700 photos of new products featured in the New Products Showcase at the 2011 SEMA Show. The products can be viewed page by page, or visitors can search by category, including diesel performance, off-road, mobile electronics, racing/motorsports, restyling, street rod/hot rod/custom, street performance and more.

In addition to the high-resolution photos, the photo pages include the product's name, brief description and contact information for the company. To get started, visit www.semaphotos.com.

Thu, 04/26/2012 - 16:56

 

  new products
  SEMA's www.semaphotos.com website includes more than 1,700 photos of new products featured in the New Products Showcase at the 2011 SEMA Show.

You know that your product is fantastic, and SEMA would like to present an opportunity to get more hobbyists interested in your latest and greatest.

A major enthusiast publication has requested new product announcements and press releases from SEMA members, regardless of product type.

To take advantage of this opportunity, e-mail Della Domingo at dellad@sema.org and submit your product information as a pdf or Word document.

Looking for products? SEMA's www.semaphotos.com website includes more than 1,700 photos of new products featured in the New Products Showcase at the 2011 SEMA Show. The products can be viewed page by page, or visitors can search by category, including diesel performance, off-road, mobile electronics, racing/motorsports, restyling, street rod/hot rod/custom, street performance and more.

In addition to the high-resolution photos, the photo pages include the product's name, brief description and contact information for the company. To get started, visit www.semaphotos.com.

Thu, 04/26/2012 - 16:03

New CAD files for eight GM and five Ford vehicles, as well as 2D prints of the starter for the Ford Big Block V8, have been added to SEMA Tech Transfer. The data-sharing program features thousands of files from participating OEMs—Chrysler, Ford, GM and Scion—and is open to SEMA manufacturing members free of charge.

Tech Transfer is a collaboration between SEMA members, OEMs and SEMA staff, and the intent of the program is to minimize or eliminate the necessity for reverse engineering.

New files are added weekly, and the amount of files and data available is fueled by requests made by SEMA manufacturing members. Here are the latest files added this week:

2012 Cadillac CTS-V

  • Air cleaner assembly
  • Front side-door window switch bezel assembly

2012 Chevrolet Silverado 3500

  • Engine Assembly

2012 Chevrolet Camaro ZL1

  • Steering gear with front suspension and knuckle assembly
  • Rear stabilizer shaft with links assembly

2012 Chevrolet Corvette

  • Front suspension and knuckle assembly
  • Wheel stub assembly

2012 Chevrolet Camaro SS

  • Wheel stub assembly
  • Rear stabilizer shaft with links assembly  

2012 Chevrolet Camaro

  • Rear stabilizer shaft with links assembly 

2006 Chevrolet Silverado 3500

  • Engine mount assembly (6.6L)

1968 Ford Mustang

  • Engine block - SBF - 2D print

2011 Ford SuperDuty

  • DEF reservoir and brackets - 2D print

2011 Ford F-150

  • Heater and radiator hoses  

1970+ Ford Big Block V8

  • Starter - 2D print

2011 Ford Mustang 

  • Decklid hinges

2013 Ford Mustang

  • Radiator, core support and coolant reservoir

To gain access to the files listed above, e-mail techtransfer@sema.org and make a request. Looking for additional files? Check out all that Tech Transfer has to offer by visiting www.SEMA.org/techtransfer.

In addition to SEMA Tech Transfer, the association also provides rapid prototype services as a benefit to SEMA members. This service is available to create ABS plastic prototypes of company designs at a reduced rate available only to SEMA members.

For more information, visit www.sema.org/rapid-prototyping. For additional information or questions about the program, contact techtransfer@sema.org.

Thu, 04/26/2012 - 16:03

New CAD files for eight GM and five Ford vehicles, as well as 2D prints of the starter for the Ford Big Block V8, have been added to SEMA Tech Transfer. The data-sharing program features thousands of files from participating OEMs—Chrysler, Ford, GM and Scion—and is open to SEMA manufacturing members free of charge.

Tech Transfer is a collaboration between SEMA members, OEMs and SEMA staff, and the intent of the program is to minimize or eliminate the necessity for reverse engineering.

New files are added weekly, and the amount of files and data available is fueled by requests made by SEMA manufacturing members. Here are the latest files added this week:

2012 Cadillac CTS-V

  • Air cleaner assembly
  • Front side-door window switch bezel assembly

2012 Chevrolet Silverado 3500

  • Engine Assembly

2012 Chevrolet Camaro ZL1

  • Steering gear with front suspension and knuckle assembly
  • Rear stabilizer shaft with links assembly

2012 Chevrolet Corvette

  • Front suspension and knuckle assembly
  • Wheel stub assembly

2012 Chevrolet Camaro SS

  • Wheel stub assembly
  • Rear stabilizer shaft with links assembly  

2012 Chevrolet Camaro

  • Rear stabilizer shaft with links assembly 

2006 Chevrolet Silverado 3500

  • Engine mount assembly (6.6L)

1968 Ford Mustang

  • Engine block - SBF - 2D print

2011 Ford SuperDuty

  • DEF reservoir and brackets - 2D print

2011 Ford F-150

  • Heater and radiator hoses  

1970+ Ford Big Block V8

  • Starter - 2D print

2011 Ford Mustang 

  • Decklid hinges

2013 Ford Mustang

  • Radiator, core support and coolant reservoir

To gain access to the files listed above, e-mail techtransfer@sema.org and make a request. Looking for additional files? Check out all that Tech Transfer has to offer by visiting www.SEMA.org/techtransfer.

In addition to SEMA Tech Transfer, the association also provides rapid prototype services as a benefit to SEMA members. This service is available to create ABS plastic prototypes of company designs at a reduced rate available only to SEMA members.

For more information, visit www.sema.org/rapid-prototyping. For additional information or questions about the program, contact techtransfer@sema.org.

Thu, 04/26/2012 - 15:16
  35 under 35
  Now's your chance to nominate the best young talent in the automotive aftermarket industry for recognition in SEMA News and on www.sema.org.

SEMA News is searching for the best young talent in the automotive aftermarket industry and we need your input.

We're asking for help finding young leaders who are 35 years old or less. They might be working anywhere in the automotive aftermarket business, including manufacturing and design, retail, events and media or distribution.

They could be budding superstars at an established company, entrepreneurs building their own brands, or innovators who have launched companies that are sure to become big names in the future. What they all will have in common are fresh ideas, enthusiasm, charisma and the drive to succeed. Nominate now.

Winners will be chosen based on their business success, contribution to their organization, industry knowledge and community involvement. We'll honor the winners in the September issue of SEMA News and on www.sema.org.

Nominate now. Nominations are due May 1, 2012.