Thu, 07/26/2018 - 13:32

By SEMA Editors

Superformance
Superformance CEO Lance Stander—a strong advocate for the creation of the law that passed as part of the 2015 Highway Bill enabling the production of low-volume specialty vehicles—calls on Washington to take immediate action after the National Highway Traffic Safety Administration fails to meet rulemaking deadlines, hurting manufacturing companies that tooled up in anticipation of the new law.

In December 2015, the U.S. Congress passed the “Fixing America’s Surface Transportation (FAST) Act,” allowing low-volume auto manufacturers to produce up to 325 replica vehicles per year for sale in the United States. Now, almost three years later, manufacturers are still waiting for the government to hold up its end of the deal. Lance Stander, CEO of Superformance—a company that manufactures iconic American cars from the ’60s—was a driving force behind the bill, and now wants the government to follow through on the missed deadlines.

The Act stipulated that the National Highway Traffic Safety Administration (NHTSA) had until December 2016 to create any necessary regulations and to implement the replica vehicle law. As such, Superformance and other replica car companies invested heavily in supplier contracts, real estate and tooling to ramp up production. The implementation of the Act is now a year and a half overdue. Despite pressure from Congress, NHTSA has failed to issue a rule or a timeline on when it will act, putting manufacturing jobs on hold, leaving customers frustrated and small businesses losing millions of dollars.

“When Congress passed the bill back in 2015, we thought this was the last piece of the puzzle we had been waiting for,” said Superformance CEO Lance Stander. “Little did we know we would be playing a waiting game with the government for nearly three years.”

Superformance and other replica car companies thought that by 2017, they would be selling their vehicles in record numbers, but instead production is nonexistent. There is debate as to whether any regulations are even necessary since the law is limited only to companies that sell less than 5,000 vehicles a year worldwide and focuses on new “continuation” versions of vintage vehicles. The replica cars must be environmentally friendly and meet the current model-year clean engine standards set by the Environmental Protection Agency. The agency is currently putting the final touches on the procedures allowing clean engine installations.

“It is unacceptable that this delay is precluding replica car manufacturers from starting production,” Stander continues. “The work to be done by NHTSA is very simple—create a form allowing companies to register online and file annual reports. Such electronic paperwork is already in place for large-scale car manufacturers. When the law passed, we began tooling up for increased production; we secured a new facility and hired more staff. Several other specialty car builders did the same. Now we’re all on hold waiting, and the wait will not only cost us sales and jobs, but it also hurts the hundreds of parts manufacturers that supply the carmakers. Jobs are at stake here.”

Superformance stands with hundreds of other companies in the automotive aftermarket industry urging NHTSA to get its work done. NHTSA must be held accountable for its actions.

For more information on Superformance and its full line of continuation vehicles, visit www.superformance.com or call 800-297-6253.

Thu, 07/26/2018 - 13:32

By SEMA Editors

Superformance
Superformance CEO Lance Stander—a strong advocate for the creation of the law that passed as part of the 2015 Highway Bill enabling the production of low-volume specialty vehicles—calls on Washington to take immediate action after the National Highway Traffic Safety Administration fails to meet rulemaking deadlines, hurting manufacturing companies that tooled up in anticipation of the new law.

In December 2015, the U.S. Congress passed the “Fixing America’s Surface Transportation (FAST) Act,” allowing low-volume auto manufacturers to produce up to 325 replica vehicles per year for sale in the United States. Now, almost three years later, manufacturers are still waiting for the government to hold up its end of the deal. Lance Stander, CEO of Superformance—a company that manufactures iconic American cars from the ’60s—was a driving force behind the bill, and now wants the government to follow through on the missed deadlines.

The Act stipulated that the National Highway Traffic Safety Administration (NHTSA) had until December 2016 to create any necessary regulations and to implement the replica vehicle law. As such, Superformance and other replica car companies invested heavily in supplier contracts, real estate and tooling to ramp up production. The implementation of the Act is now a year and a half overdue. Despite pressure from Congress, NHTSA has failed to issue a rule or a timeline on when it will act, putting manufacturing jobs on hold, leaving customers frustrated and small businesses losing millions of dollars.

“When Congress passed the bill back in 2015, we thought this was the last piece of the puzzle we had been waiting for,” said Superformance CEO Lance Stander. “Little did we know we would be playing a waiting game with the government for nearly three years.”

Superformance and other replica car companies thought that by 2017, they would be selling their vehicles in record numbers, but instead production is nonexistent. There is debate as to whether any regulations are even necessary since the law is limited only to companies that sell less than 5,000 vehicles a year worldwide and focuses on new “continuation” versions of vintage vehicles. The replica cars must be environmentally friendly and meet the current model-year clean engine standards set by the Environmental Protection Agency. The agency is currently putting the final touches on the procedures allowing clean engine installations.

“It is unacceptable that this delay is precluding replica car manufacturers from starting production,” Stander continues. “The work to be done by NHTSA is very simple—create a form allowing companies to register online and file annual reports. Such electronic paperwork is already in place for large-scale car manufacturers. When the law passed, we began tooling up for increased production; we secured a new facility and hired more staff. Several other specialty car builders did the same. Now we’re all on hold waiting, and the wait will not only cost us sales and jobs, but it also hurts the hundreds of parts manufacturers that supply the carmakers. Jobs are at stake here.”

Superformance stands with hundreds of other companies in the automotive aftermarket industry urging NHTSA to get its work done. NHTSA must be held accountable for its actions.

For more information on Superformance and its full line of continuation vehicles, visit www.superformance.com or call 800-297-6253.

Thu, 07/26/2018 - 13:32

By SEMA Editors

Superformance
Superformance CEO Lance Stander—a strong advocate for the creation of the law that passed as part of the 2015 Highway Bill enabling the production of low-volume specialty vehicles—calls on Washington to take immediate action after the National Highway Traffic Safety Administration fails to meet rulemaking deadlines, hurting manufacturing companies that tooled up in anticipation of the new law.

In December 2015, the U.S. Congress passed the “Fixing America’s Surface Transportation (FAST) Act,” allowing low-volume auto manufacturers to produce up to 325 replica vehicles per year for sale in the United States. Now, almost three years later, manufacturers are still waiting for the government to hold up its end of the deal. Lance Stander, CEO of Superformance—a company that manufactures iconic American cars from the ’60s—was a driving force behind the bill, and now wants the government to follow through on the missed deadlines.

The Act stipulated that the National Highway Traffic Safety Administration (NHTSA) had until December 2016 to create any necessary regulations and to implement the replica vehicle law. As such, Superformance and other replica car companies invested heavily in supplier contracts, real estate and tooling to ramp up production. The implementation of the Act is now a year and a half overdue. Despite pressure from Congress, NHTSA has failed to issue a rule or a timeline on when it will act, putting manufacturing jobs on hold, leaving customers frustrated and small businesses losing millions of dollars.

“When Congress passed the bill back in 2015, we thought this was the last piece of the puzzle we had been waiting for,” said Superformance CEO Lance Stander. “Little did we know we would be playing a waiting game with the government for nearly three years.”

Superformance and other replica car companies thought that by 2017, they would be selling their vehicles in record numbers, but instead production is nonexistent. There is debate as to whether any regulations are even necessary since the law is limited only to companies that sell less than 5,000 vehicles a year worldwide and focuses on new “continuation” versions of vintage vehicles. The replica cars must be environmentally friendly and meet the current model-year clean engine standards set by the Environmental Protection Agency. The agency is currently putting the final touches on the procedures allowing clean engine installations.

“It is unacceptable that this delay is precluding replica car manufacturers from starting production,” Stander continues. “The work to be done by NHTSA is very simple—create a form allowing companies to register online and file annual reports. Such electronic paperwork is already in place for large-scale car manufacturers. When the law passed, we began tooling up for increased production; we secured a new facility and hired more staff. Several other specialty car builders did the same. Now we’re all on hold waiting, and the wait will not only cost us sales and jobs, but it also hurts the hundreds of parts manufacturers that supply the carmakers. Jobs are at stake here.”

Superformance stands with hundreds of other companies in the automotive aftermarket industry urging NHTSA to get its work done. NHTSA must be held accountable for its actions.

For more information on Superformance and its full line of continuation vehicles, visit www.superformance.com or call 800-297-6253.

Thu, 07/26/2018 - 12:42

By Chad Simon

Banquet
About 400 members of the automotive specialty-parts industry attended the 2018 SEMA Installation & Gala, themed “Success Starts Here,” at the Hilton Los Angeles/Universal City in Universal City, California, on July 20, to pay tribute to the specialty-equipment industry’s pioneers and dedicated volunteers.

About 400 members of the automotive specialty-parts industry attended the 2018 SEMA Installation & Gala, themed “Success Starts Here,” at the Hilton Los Angeles/Universal City in Universal City, California, on July 20, to pay tribute to the specialty-equipment industry’s pioneers and dedicated volunteers.

Jessi Combs and Kevin Oeste served as the evening’s emcees. Honorees included the SEMA Hall of Fame class of 2018—Donnie Eatherly, P&E Distributors; Ed Pink, Ed Pink’s Garage; and Chris Thomson, TMG Performance Products.

The festivities kicked-off with the Pinewood Drag Races—an annual fundraiser for SEMA Cares charities, including Childhelp and Victory Junction. In addition to the Build-It-For-Me (BIFM) class, the races included the Council Cup, People’s Choice, several different industry classes and Industry Cup Challenge. Children living at the Childhelp facilities and Victory Junction campers built the vehicles for the BIFM class and donors sponsored their racecars for $95.

Shortly after the races ended, SEMA President and CEO Chris Kersting and Chairman of the Board Wade Kawasaki took the stage to personally recognize the efforts of outgoing Board of Directors officials and welcome the incoming Board. They included:

  • Jim Bingham of Winner’s Circle Speed & Custom Inc. (outgoing)
  • Laurel Dasher of MagnaFlow (outgoing)
  • Russ Deane of Trainum, Snowdon & Deane, General Counsel (outgoing)
  • Susan Carpenter of CPG (outgoing)
  • Donnie Eatherly of P&E Distributors (incoming)
  • David Goch of Webster of Chamberlain & Bean LLP, General Counsel
  • Nick Gramelspacher of Meyer Distributing (outgoing)
  • Dan Kahn of Kahn Media Inc. (re-elected)
  • Brian Lounsberry of Motovicity Distribution (incoming)
  • Dr. Jamie Meyer of General Motors (incoming)
  • Steve Whipple of Edelbrock LLC (incoming)

Here’s a look at the pinewood leaderboard:

Council Cup

1st Place: Automotive Restoration Market Association (ARMO)

Build It For Me Class (cars and trucks built by kids)

1st Place: Hella

People’s Choice

Edelbrock

Industry Cup Challenge

1st Place: Hot Rod

Media Class: Hot Rod
Service Provider’s Class: LGE*CTS
Rep Agency Class: R&R Marketing
Warehouse Distributor Class: RSD
Manufacturer’s Class: A.R.E.

While the racing is over, it’s not too late to make a direct donation to Childhelp and Victory Junction via SEMA Cares.

The following photos showcase activities from the 2018 SEMA Installation & Gala:

Emcees
The Gala was emceed by industry personalities Kevin Oeste (left) and Jessi Combs (right).
 Wade Kawasaki
SEMA Board of Directors Chairman Wade Kawasaki welcomed attendees to the annual Installation & Gala.
Chris Kersting
SEMA President and CEO Chris Kersting (left) and SEMA Chairman of the Board Wade Kawasaki (right) honored longtime SEMA Counsel Russ Deane, who retired.
 Rich Barsamian
SEMA Cares Chairman Rich Barsamian encouraged guests to sponsor a Pinewood car to help raise money for children’s charities.
Jim Bingham
Outgoing SEMA Board member Jim Bingham (center) of Winner’s Circle Speed & Custom Inc. was recognized for his contributions.
 Donnie Eatherly
Donnie Eatherly of P&E Distributors was welcomed to the SEMA Board.
Gramelspacher
Outgoing Board member Nick Gramelspacher (center) of Meyer Distributing was thanked for his efforts.
 Dan Kahn
Dan Kahn (center) of Kahn Media Inc. was re-elected to the SEMA Board of Directors.
Laurel Dasher
Outgoing SEMA Board member Laurel Dasher (center) of MagnaFlow was recognized for her contributions.
 Jamie Meyer
Dr. Jamie Meyer (center) of General Motors was welcomed to the SEMA Board of Directors.
Brian Lounsberry
Brian Lounsberry (center) of Motovicity Distribution was welcomed to the SEMA Board of Directors.
 Russ Deane
SEMA paid tribute to longtime General Counsel Russ Deane (center), who retired.
Steve Whipple
Steve Whipple (center) of Edelbrock LLC was welcomed to the SEMA Board.
 Donnie Eatherly
2018 SEMA Hall of Fame inductee Donnie Eatherly.
Ed Pink
2018 SEMA Hall of Fame inductee Ed Pink.
 Chris Thomson2018 SEMA Hall of Fame inductee Chris Thomson.
Pinewood
The SEMA Pinewood Drag Races, held in conjunction with the Installation & Gala, raised money for charities supported by SEMA Cares.
 

Board
2018–2019 SEMA Board of Directors.

 

 

Thu, 07/26/2018 - 12:42

By Chad Simon

Banquet
About 400 members of the automotive specialty-parts industry attended the 2018 SEMA Installation & Gala, themed “Success Starts Here,” at the Hilton Los Angeles/Universal City in Universal City, California, on July 20, to pay tribute to the specialty-equipment industry’s pioneers and dedicated volunteers.

About 400 members of the automotive specialty-parts industry attended the 2018 SEMA Installation & Gala, themed “Success Starts Here,” at the Hilton Los Angeles/Universal City in Universal City, California, on July 20, to pay tribute to the specialty-equipment industry’s pioneers and dedicated volunteers.

Jessi Combs and Kevin Oeste served as the evening’s emcees. Honorees included the SEMA Hall of Fame class of 2018—Donnie Eatherly, P&E Distributors; Ed Pink, Ed Pink’s Garage; and Chris Thomson, TMG Performance Products.

The festivities kicked-off with the Pinewood Drag Races—an annual fundraiser for SEMA Cares charities, including Childhelp and Victory Junction. In addition to the Build-It-For-Me (BIFM) class, the races included the Council Cup, People’s Choice, several different industry classes and Industry Cup Challenge. Children living at the Childhelp facilities and Victory Junction campers built the vehicles for the BIFM class and donors sponsored their racecars for $95.

Shortly after the races ended, SEMA President and CEO Chris Kersting and Chairman of the Board Wade Kawasaki took the stage to personally recognize the efforts of outgoing Board of Directors officials and welcome the incoming Board. They included:

  • Jim Bingham of Winner’s Circle Speed & Custom Inc. (outgoing)
  • Laurel Dasher of MagnaFlow (outgoing)
  • Russ Deane of Trainum, Snowdon & Deane, General Counsel (outgoing)
  • Susan Carpenter of CPG (outgoing)
  • Donnie Eatherly of P&E Distributors (incoming)
  • David Goch of Webster of Chamberlain & Bean LLP, General Counsel
  • Nick Gramelspacher of Meyer Distributing (outgoing)
  • Dan Kahn of Kahn Media Inc. (re-elected)
  • Brian Lounsberry of Motovicity Distribution (incoming)
  • Dr. Jamie Meyer of General Motors (incoming)
  • Steve Whipple of Edelbrock LLC (incoming)

Here’s a look at the pinewood leaderboard:

Council Cup

1st Place: Automotive Restoration Market Association (ARMO)

Build It For Me Class (cars and trucks built by kids)

1st Place: Hella

People’s Choice

Edelbrock

Industry Cup Challenge

1st Place: Hot Rod

Media Class: Hot Rod
Service Provider’s Class: LGE*CTS
Rep Agency Class: R&R Marketing
Warehouse Distributor Class: RSD
Manufacturer’s Class: A.R.E.

While the racing is over, it’s not too late to make a direct donation to Childhelp and Victory Junction via SEMA Cares.

The following photos showcase activities from the 2018 SEMA Installation & Gala:

Emcees
The Gala was emceed by industry personalities Kevin Oeste (left) and Jessi Combs (right).
 Wade Kawasaki
SEMA Board of Directors Chairman Wade Kawasaki welcomed attendees to the annual Installation & Gala.
Chris Kersting
SEMA President and CEO Chris Kersting (left) and SEMA Chairman of the Board Wade Kawasaki (right) honored longtime SEMA Counsel Russ Deane, who retired.
 Rich Barsamian
SEMA Cares Chairman Rich Barsamian encouraged guests to sponsor a Pinewood car to help raise money for children’s charities.
Jim Bingham
Outgoing SEMA Board member Jim Bingham (center) of Winner’s Circle Speed & Custom Inc. was recognized for his contributions.
 Donnie Eatherly
Donnie Eatherly of P&E Distributors was welcomed to the SEMA Board.
Gramelspacher
Outgoing Board member Nick Gramelspacher (center) of Meyer Distributing was thanked for his efforts.
 Dan Kahn
Dan Kahn (center) of Kahn Media Inc. was re-elected to the SEMA Board of Directors.
Laurel Dasher
Outgoing SEMA Board member Laurel Dasher (center) of MagnaFlow was recognized for her contributions.
 Jamie Meyer
Dr. Jamie Meyer (center) of General Motors was welcomed to the SEMA Board of Directors.
Brian Lounsberry
Brian Lounsberry (center) of Motovicity Distribution was welcomed to the SEMA Board of Directors.
 Russ Deane
SEMA paid tribute to longtime General Counsel Russ Deane (center), who retired.
Steve Whipple
Steve Whipple (center) of Edelbrock LLC was welcomed to the SEMA Board.
 Donnie Eatherly
2018 SEMA Hall of Fame inductee Donnie Eatherly.
Ed Pink
2018 SEMA Hall of Fame inductee Ed Pink.
 Chris Thomson2018 SEMA Hall of Fame inductee Chris Thomson.
Pinewood
The SEMA Pinewood Drag Races, held in conjunction with the Installation & Gala, raised money for charities supported by SEMA Cares.
 

Board
2018–2019 SEMA Board of Directors.

 

 

Thu, 07/26/2018 - 12:42

By Chad Simon

Banquet
About 400 members of the automotive specialty-parts industry attended the 2018 SEMA Installation & Gala, themed “Success Starts Here,” at the Hilton Los Angeles/Universal City in Universal City, California, on July 20, to pay tribute to the specialty-equipment industry’s pioneers and dedicated volunteers.

About 400 members of the automotive specialty-parts industry attended the 2018 SEMA Installation & Gala, themed “Success Starts Here,” at the Hilton Los Angeles/Universal City in Universal City, California, on July 20, to pay tribute to the specialty-equipment industry’s pioneers and dedicated volunteers.

Jessi Combs and Kevin Oeste served as the evening’s emcees. Honorees included the SEMA Hall of Fame class of 2018—Donnie Eatherly, P&E Distributors; Ed Pink, Ed Pink’s Garage; and Chris Thomson, TMG Performance Products.

The festivities kicked-off with the Pinewood Drag Races—an annual fundraiser for SEMA Cares charities, including Childhelp and Victory Junction. In addition to the Build-It-For-Me (BIFM) class, the races included the Council Cup, People’s Choice, several different industry classes and Industry Cup Challenge. Children living at the Childhelp facilities and Victory Junction campers built the vehicles for the BIFM class and donors sponsored their racecars for $95.

Shortly after the races ended, SEMA President and CEO Chris Kersting and Chairman of the Board Wade Kawasaki took the stage to personally recognize the efforts of outgoing Board of Directors officials and welcome the incoming Board. They included:

  • Jim Bingham of Winner’s Circle Speed & Custom Inc. (outgoing)
  • Laurel Dasher of MagnaFlow (outgoing)
  • Russ Deane of Trainum, Snowdon & Deane, General Counsel (outgoing)
  • Susan Carpenter of CPG (outgoing)
  • Donnie Eatherly of P&E Distributors (incoming)
  • David Goch of Webster of Chamberlain & Bean LLP, General Counsel
  • Nick Gramelspacher of Meyer Distributing (outgoing)
  • Dan Kahn of Kahn Media Inc. (re-elected)
  • Brian Lounsberry of Motovicity Distribution (incoming)
  • Dr. Jamie Meyer of General Motors (incoming)
  • Steve Whipple of Edelbrock LLC (incoming)

Here’s a look at the pinewood leaderboard:

Council Cup

1st Place: Automotive Restoration Market Association (ARMO)

Build It For Me Class (cars and trucks built by kids)

1st Place: Hella

People’s Choice

Edelbrock

Industry Cup Challenge

1st Place: Hot Rod

Media Class: Hot Rod
Service Provider’s Class: LGE*CTS
Rep Agency Class: R&R Marketing
Warehouse Distributor Class: RSD
Manufacturer’s Class: A.R.E.

While the racing is over, it’s not too late to make a direct donation to Childhelp and Victory Junction via SEMA Cares.

The following photos showcase activities from the 2018 SEMA Installation & Gala:

Emcees
The Gala was emceed by industry personalities Kevin Oeste (left) and Jessi Combs (right).
 Wade Kawasaki
SEMA Board of Directors Chairman Wade Kawasaki welcomed attendees to the annual Installation & Gala.
Chris Kersting
SEMA President and CEO Chris Kersting (left) and SEMA Chairman of the Board Wade Kawasaki (right) honored longtime SEMA Counsel Russ Deane, who retired.
 Rich Barsamian
SEMA Cares Chairman Rich Barsamian encouraged guests to sponsor a Pinewood car to help raise money for children’s charities.
Jim Bingham
Outgoing SEMA Board member Jim Bingham (center) of Winner’s Circle Speed & Custom Inc. was recognized for his contributions.
 Donnie Eatherly
Donnie Eatherly of P&E Distributors was welcomed to the SEMA Board.
Gramelspacher
Outgoing Board member Nick Gramelspacher (center) of Meyer Distributing was thanked for his efforts.
 Dan Kahn
Dan Kahn (center) of Kahn Media Inc. was re-elected to the SEMA Board of Directors.
Laurel Dasher
Outgoing SEMA Board member Laurel Dasher (center) of MagnaFlow was recognized for her contributions.
 Jamie Meyer
Dr. Jamie Meyer (center) of General Motors was welcomed to the SEMA Board of Directors.
Brian Lounsberry
Brian Lounsberry (center) of Motovicity Distribution was welcomed to the SEMA Board of Directors.
 Russ Deane
SEMA paid tribute to longtime General Counsel Russ Deane (center), who retired.
Steve Whipple
Steve Whipple (center) of Edelbrock LLC was welcomed to the SEMA Board.
 Donnie Eatherly
2018 SEMA Hall of Fame inductee Donnie Eatherly.
Ed Pink
2018 SEMA Hall of Fame inductee Ed Pink.
 Chris Thomson2018 SEMA Hall of Fame inductee Chris Thomson.
Pinewood
The SEMA Pinewood Drag Races, held in conjunction with the Installation & Gala, raised money for charities supported by SEMA Cares.
 

Board
2018–2019 SEMA Board of Directors.

 

 

Thu, 07/26/2018 - 11:30

By Katie Carson

HRIA
During the 2018 HRIA Education Days, 12 manufacturers in the hot-rod segment will give hour-long presentations on their product lines, and tips and tricks for attendees’ projects and builds.

The Hot Rod Industry Alliance (HRIA) Education Days will be held Thursday, August 2–Friday, August 3, at the NSRA Street Rod Nationals in Louisville, Kentucky. Twelve hot-rod manufacturers will give hour-long presentations on their product lines, and also provide tips and tricks for attendees’ projects and builds.

Sessions will begin at 9:15 a.m., with the last session concluding at 4:30 p.m., and are open to all NSRA Nationals attendees. This is a popular event and seats are limited.

Reserve your spot in the sessions that most interest you.

The following is a sneak peek of the manufacturers and the discussion topics scheduled for the 2018 event:

FAST EFI – “Understanding EFI”
Presenter: Kevin Winstead

FATMAN Fabrications – “Chassis Design”
Presenter: Brent VanDervort

Borgeson – “Power Steering Conversions”
Presenter: Jeff Grantmeyer

Classic Instruments – “Instrumentation For Your Dash”
Presenter: John McLeod

Painless Performance – “Dos and Don’ts of Wire Harness Installations”
Presenter: Dennis Overholser

Edelbrock – “Edelbrock Has Your Fuel System Solutions”
Presenter: Cary Redman

Vintage Air – “Basics of Air Conditioning”
Presenter: Rick Love

Steele Rubber Products – “Pro Tips on Weather Strips”
Presenter: Danny and Matt Agosta

American Autowire – “Wiring Solutions”
Presenter: Scott Hughes

Wilwood Disc Brakes – “Understanding Brake Systems”
Presenter: Bob Roese

Lokar – “Being Prepared for the NSRA Safety 23”
Presenter: Howard Cook and Jeff McClure

Total Cost Involved – “Basics of Modern Suspensions”
Presenter: Evan Dalley

HRIA General Membership Meeting—Louisville

Prior to Education Days, HRIA will kick off NSRA Nationals weekend in Louisville with a General Membership meeting on August 1. The event serves as a great opportunity to get together with industry friends and associates and learn more about what HRIA has been up to and what’s next. The meeting also provides attendees an opportunity to interface directly with HRIA leadership and bring suggestions to the table.

Join HRIA at the Kentucky Expo Center in room B101 on August 1, at 3:30 p.m., where the HRIA select committee will provide updates on the latest council initiatives and activities. Register now for the meeting. 

For questions, contact Jim Skelly at 909-978-6690 or jimsk@sema.org.

Thu, 07/26/2018 - 11:30

By Katie Carson

HRIA
During the 2018 HRIA Education Days, 12 manufacturers in the hot-rod segment will give hour-long presentations on their product lines, and tips and tricks for attendees’ projects and builds.

The Hot Rod Industry Alliance (HRIA) Education Days will be held Thursday, August 2–Friday, August 3, at the NSRA Street Rod Nationals in Louisville, Kentucky. Twelve hot-rod manufacturers will give hour-long presentations on their product lines, and also provide tips and tricks for attendees’ projects and builds.

Sessions will begin at 9:15 a.m., with the last session concluding at 4:30 p.m., and are open to all NSRA Nationals attendees. This is a popular event and seats are limited.

Reserve your spot in the sessions that most interest you.

The following is a sneak peek of the manufacturers and the discussion topics scheduled for the 2018 event:

FAST EFI – “Understanding EFI”
Presenter: Kevin Winstead

FATMAN Fabrications – “Chassis Design”
Presenter: Brent VanDervort

Borgeson – “Power Steering Conversions”
Presenter: Jeff Grantmeyer

Classic Instruments – “Instrumentation For Your Dash”
Presenter: John McLeod

Painless Performance – “Dos and Don’ts of Wire Harness Installations”
Presenter: Dennis Overholser

Edelbrock – “Edelbrock Has Your Fuel System Solutions”
Presenter: Cary Redman

Vintage Air – “Basics of Air Conditioning”
Presenter: Rick Love

Steele Rubber Products – “Pro Tips on Weather Strips”
Presenter: Danny and Matt Agosta

American Autowire – “Wiring Solutions”
Presenter: Scott Hughes

Wilwood Disc Brakes – “Understanding Brake Systems”
Presenter: Bob Roese

Lokar – “Being Prepared for the NSRA Safety 23”
Presenter: Howard Cook and Jeff McClure

Total Cost Involved – “Basics of Modern Suspensions”
Presenter: Evan Dalley

HRIA General Membership Meeting—Louisville

Prior to Education Days, HRIA will kick off NSRA Nationals weekend in Louisville with a General Membership meeting on August 1. The event serves as a great opportunity to get together with industry friends and associates and learn more about what HRIA has been up to and what’s next. The meeting also provides attendees an opportunity to interface directly with HRIA leadership and bring suggestions to the table.

Join HRIA at the Kentucky Expo Center in room B101 on August 1, at 3:30 p.m., where the HRIA select committee will provide updates on the latest council initiatives and activities. Register now for the meeting. 

For questions, contact Jim Skelly at 909-978-6690 or jimsk@sema.org.

Thu, 07/26/2018 - 11:30

By Katie Carson

HRIA
During the 2018 HRIA Education Days, 12 manufacturers in the hot-rod segment will give hour-long presentations on their product lines, and tips and tricks for attendees’ projects and builds.

The Hot Rod Industry Alliance (HRIA) Education Days will be held Thursday, August 2–Friday, August 3, at the NSRA Street Rod Nationals in Louisville, Kentucky. Twelve hot-rod manufacturers will give hour-long presentations on their product lines, and also provide tips and tricks for attendees’ projects and builds.

Sessions will begin at 9:15 a.m., with the last session concluding at 4:30 p.m., and are open to all NSRA Nationals attendees. This is a popular event and seats are limited.

Reserve your spot in the sessions that most interest you.

The following is a sneak peek of the manufacturers and the discussion topics scheduled for the 2018 event:

FAST EFI – “Understanding EFI”
Presenter: Kevin Winstead

FATMAN Fabrications – “Chassis Design”
Presenter: Brent VanDervort

Borgeson – “Power Steering Conversions”
Presenter: Jeff Grantmeyer

Classic Instruments – “Instrumentation For Your Dash”
Presenter: John McLeod

Painless Performance – “Dos and Don’ts of Wire Harness Installations”
Presenter: Dennis Overholser

Edelbrock – “Edelbrock Has Your Fuel System Solutions”
Presenter: Cary Redman

Vintage Air – “Basics of Air Conditioning”
Presenter: Rick Love

Steele Rubber Products – “Pro Tips on Weather Strips”
Presenter: Danny and Matt Agosta

American Autowire – “Wiring Solutions”
Presenter: Scott Hughes

Wilwood Disc Brakes – “Understanding Brake Systems”
Presenter: Bob Roese

Lokar – “Being Prepared for the NSRA Safety 23”
Presenter: Howard Cook and Jeff McClure

Total Cost Involved – “Basics of Modern Suspensions”
Presenter: Evan Dalley

HRIA General Membership Meeting—Louisville

Prior to Education Days, HRIA will kick off NSRA Nationals weekend in Louisville with a General Membership meeting on August 1. The event serves as a great opportunity to get together with industry friends and associates and learn more about what HRIA has been up to and what’s next. The meeting also provides attendees an opportunity to interface directly with HRIA leadership and bring suggestions to the table.

Join HRIA at the Kentucky Expo Center in room B101 on August 1, at 3:30 p.m., where the HRIA select committee will provide updates on the latest council initiatives and activities. Register now for the meeting. 

For questions, contact Jim Skelly at 909-978-6690 or jimsk@sema.org.

Thu, 07/26/2018 - 11:10

By Katie Carson

Town Hall Meeting
The upcoming Town Hall meeting in Plano, Texas, will give attendees the opportunity to learn about the Young Executives Network (YEN) and SEMA’s current programs and objectives while networking with automotive aftermarket professionals from the same geographic region.

Toyota Motor Sales will host the Young Executives Network (YEN) Town Hall meeting, August 3, at its new facility in Plano, Texas, from 6:00 p.m.–8:00 p.m. The one-night-only, free event will be hosted by YEN—a professional network geared toward the advancement of automotive professionals under the age of 40. YEN members and all local young automotive aftermarket professionals are encouraged to attend to discuss important and relevant topics, network with local industry leaders and get plugged into the industry. Attendees do not need to be YEN or SEMA members to participate.

The YEN Town Hall meeting will provide the following benefits for attendees:

  • Connect with fellow young professionals.
  • Share challenges young people face in their careers and the industry.
  • Discuss how SEMA can help.

This event will give attendees with the opportunity to learn about YEN and SEMA’s current programs and objectives while networking with automotive aftermarket professionals from the same geographic region. These personal interactions offer members a chance to share the business challenges and opportunities they face. Attendees can also interact with SEMA staff to gain valuable feedback, which helps identify how current benefits can enhance members’ business operations to better meet the needs of young professionals.  

Register to attend today!

For questions, contact Bryan Harrison at 909-978-6691 or bryanh@sema.org.