SEMA News—August 2019

NEW PRODUCTS

By Douglas McColloch

Tools might be the aftermarket items most taken for granted, left on a shop floor to gather dust or tossed in a grimy parts bin. Yet they’re certainly among the most important everyday shop components because they allow fabricators and customizers to transform their vehicular visions into reality. Whether they’re cutting, clamping, wrenching, riveting, lifting, measuring, monitoring or performing a thousand other tasks, tools and equipment are the workhorses of any shop, and having the right one at hand is essential for any dedicated builder. They’re also an important element of the annual SEMA Show, with an entire dedicated section in the North Hall. The following pages represent a sampling of that section’s latest innovations, as introduced in the 2018 SEMA Show New Products Showcase.

Dannmar Equipment MaxMoto MaxMoto, the portable motorcycle lift, is designed to handle up to 2,500 lbs./1,136 kg. Lift height of 48 in. Fits into the average home garage. Uses 110 VAC at 60 hertz. Comes with flush-mounted anchors to bolt the lift down when in use. Remove the bolts and roll it away for storage when not needed. 877-432-6627 www.dannmar.com
Schley Products/SP Tools Manual Bushing R&R Tool Set The 11100 manual bushing remove-and-replace tool set from SP Tools offers a more cost-effective alternative to traditional hydraulic press systems. The 22 cups and receivers provide a variety of sizes, ranging from 44mm to 90mm outside diameter and 34mm to 80mm inside diameter. Included are four Acme thread spindles, thrust washers and a hydraulic press ram protector for increased durability. 714-693-7666 www.sptool.com PN: 11100
Strong Hand Tools BuildPro Tube and Pipe Notcher Notch tubes and pipes at the accurate angle and length. Accurately align the first and second notches in round pipes or square tubes at any angle. Position the clamp and V-blocks on the modular fixturing block as needed to set up stock for each unique notching application. 800-989-5244 www.stronghandtools.com PN: ATN100
TKO Clamping Systems Quick-Release Anchor/Mounting Roll Bar Clamp TKO Clamping Systems manufactures custom-machined aluminum clamps and automotive accessories. The company’s hose clamps, hoods and mount/anchor clamps come in numerous anodized colors and finishes and can be personalized with engraving for one-of-a-kind specialization. 208-380-9860 www.tkoclamps.com
Horizon Tool Inc. Mighty-Seven EZ Grease Series 1/2-in.-Drive Air Impact Wrench Using a patented anvil with a grease port, the new EZ Grease series adds lubrication to heavy impact points, increasing overall efficiency and giving the user peak power for longer periods. This version is the EZ Grease NC-46255QHB, a 1/2-in.-drive air impact with 1,200 lb.-ft. of torque. Available in three torque ratings. Grease and applicator included. 336-299-4182 www.mighty-seven.com PN: NC-4255QHB
Channellock Forged Wirestripper The new Forged Wirestripper is an exceptionally strong and versatile tool built for precision operation to produce quality work with less fatigue. It is designed for durability with robust, comfortable Channellock blue grips, a spring-loaded handle for easy, one-handed operation, and a lock for safe storage. Made in the U.S.A. 800-724-3018 www.channellock.com PN: 968
Schley Products/SP Tools Universal Broken Stud Drill Guide The T1702 exhaust stud drill fixture from Tech Tools (a brand of Schley Products) allows technicians to drill and repair 8mm and 10mm exhaust studs. This tool anchors off two good studs to create a center for drilling a 4mm pilot in broken studs. The kit includes pilots, bushings, spacers, drill stops and everything needed to repair broken studs. 714-693-7666 www.sptool.com PN: T1702
MiG Buddy/GeorgeB Design Welding Gun Holder MiG Buddy is a welding gun holder designed to fit many MIG welding guns. With its universal mount, the MiG Buddy adapts to any work environment, including a welding table/bench, a welding cart, or directly on the work piece. Easy retrieval and easy docking of a welding gun. MiG Buddy is like having a third hand, saving time and money. 888-253-6703 www.migbuddy.com PN: MB-U15
Anglo American Tools Irega Super-Wide 6-in. Adjustable Wrench With Extra-Slim Jaws The Hazet angled impact wrench is designed to work in hard-to-reach areas due to its ultra-compact design. It is ideal for operating brake caliper screw connections as well as other difficult-to-access screwing applications. It features one-handed operation for right- and left-handed operators. Maximum loosening torque is 450 Newton-meters (330 lb.-ft.). 856-784-8600 www.angloamericantools.com
Boxo USA 217-Piece SAE and Metric Master Tool Set in EVA Foam Tool Control Inserts Mirror-chrome finish 1/4- and 3/8-in.-drive 12-point SAE and metric standard deep sockets. Torx, hex and screwdriver sockets, 90-tooth ratchets, extensions and accessories. Sparkplug sockets. SAE and metric combination wrench set. Ergonomic-handled screwdriver and pliers plus SAE and metric ball hex key set. 657-291-3950 www.boxousa.com PN: BXE005
Shark Holdings LLC Professional Predator RS Tech Cart Flip-top 304 stainless-steel lid with flush-mounted side shelves. Fully welded construction. Deep top cavity with integrated LED interior light and dual-point locking. Interior drawer lock-out to keep drawers from drifting open, and 150-lb. soft-close slides. Optional power strip with USB; 4-in. stainless-steel Colson casters (optional 5 in.). 855-742-7555 www.sharkprofessional.com PN: SP-7405 PRS

View all of the Tools & Equipment products featured in the 2018 SEMA Show New Products Showcase.

By SEMA Washington, D.C., Staff

The U.S. Bureau of Land Management (BLM) issued a proposed management plan and final environmental impact statement for the Bears Ears National Monument (BENM). The management plan is subject to a 30-day public protest period.

President Obama established the BENM on December 28, 2016.  On December 4, 2017, President Trump reduced the size of the BENM by 85%, from about 1.4 million acres to 200,000 acres. The monument is co-managed by the BLM and U.S. Forest Service, along with a coalition of five local Native American tribes. The proposed management plan includes limited use for off-highway vehicles in designated areas, with no land being designated as wilderness.

The BENM is still subject to court lawsuits challenging whether the Antiquities Act allows a president to reduce the size of a national monument. Although this has occurred in the past, the reduction has never been so dramatic. 

For more information, contact Stuart Gosswein at stuartg@sema.org.

By SEMA Washington, D.C., Staff

The U.S. Bureau of Land Management (BLM) issued a proposed management plan and final environmental impact statement for the Bears Ears National Monument (BENM). The management plan is subject to a 30-day public protest period.

President Obama established the BENM on December 28, 2016.  On December 4, 2017, President Trump reduced the size of the BENM by 85%, from about 1.4 million acres to 200,000 acres. The monument is co-managed by the BLM and U.S. Forest Service, along with a coalition of five local Native American tribes. The proposed management plan includes limited use for off-highway vehicles in designated areas, with no land being designated as wilderness.

The BENM is still subject to court lawsuits challenging whether the Antiquities Act allows a president to reduce the size of a national monument. Although this has occurred in the past, the reduction has never been so dramatic. 

For more information, contact Stuart Gosswein at stuartg@sema.org.

By SEMA Washington, D.C., Staff

The U.S. Bureau of Land Management (BLM) issued a proposed management plan and final environmental impact statement for the Bears Ears National Monument (BENM). The management plan is subject to a 30-day public protest period.

President Obama established the BENM on December 28, 2016.  On December 4, 2017, President Trump reduced the size of the BENM by 85%, from about 1.4 million acres to 200,000 acres. The monument is co-managed by the BLM and U.S. Forest Service, along with a coalition of five local Native American tribes. The proposed management plan includes limited use for off-highway vehicles in designated areas, with no land being designated as wilderness.

The BENM is still subject to court lawsuits challenging whether the Antiquities Act allows a president to reduce the size of a national monument. Although this has occurred in the past, the reduction has never been so dramatic. 

For more information, contact Stuart Gosswein at stuartg@sema.org.

Compiled by SEMA Editors

All motor vehicles 25 model years old and older are currently eligible for courtesy year of manufacture plates in Rhode Island.

Legislation (S.B. 621/H.B. 5888) to allow vehicles with year of manufacture (YOM) tags to display a single license plate on the rear of the vehicle passed the deadline for the Governor’s signature or veto, and thus has become law without being signed.

All motor vehicles 25 model years old and older are currently eligible for courtesy YOM plates in Rhode Island. Previously, these vehicles were required to display both front and rear YOM plates.

For more information, visit the SEMA Action Network (SAN) website.

For details, contact Christian Robinson at stateleg@sema.org.

Compiled by SEMA Editors

All motor vehicles 25 model years old and older are currently eligible for courtesy year of manufacture plates in Rhode Island.

Legislation (S.B. 621/H.B. 5888) to allow vehicles with year of manufacture (YOM) tags to display a single license plate on the rear of the vehicle passed the deadline for the Governor’s signature or veto, and thus has become law without being signed.

All motor vehicles 25 model years old and older are currently eligible for courtesy YOM plates in Rhode Island. Previously, these vehicles were required to display both front and rear YOM plates.

For more information, visit the SEMA Action Network (SAN) website.

For details, contact Christian Robinson at stateleg@sema.org.

Compiled by SEMA Editors

All motor vehicles 25 model years old and older are currently eligible for courtesy year of manufacture plates in Rhode Island.

Legislation (S.B. 621/H.B. 5888) to allow vehicles with year of manufacture (YOM) tags to display a single license plate on the rear of the vehicle passed the deadline for the Governor’s signature or veto, and thus has become law without being signed.

All motor vehicles 25 model years old and older are currently eligible for courtesy YOM plates in Rhode Island. Previously, these vehicles were required to display both front and rear YOM plates.

For more information, visit the SEMA Action Network (SAN) website.

For details, contact Christian Robinson at stateleg@sema.org.

Compiled by SEMA Editors

All motor vehicles 25 model years old and older are currently eligible for courtesy year of manufacture plates in Rhode Island.

Legislation (S.B. 621/H.B. 5888) to allow vehicles with year of manufacture (YOM) tags to display a single license plate on the rear of the vehicle passed the deadline for the Governor’s signature or veto, and thus has become law without being signed.

All motor vehicles 25 model years old and older are currently eligible for courtesy YOM plates in Rhode Island. Previously, these vehicles were required to display both front and rear YOM plates.

For more information, visit the SEMA Action Network (SAN) website.

For details, contact Christian Robinson at stateleg@sema.org.

By SEMA Washington, D.C, Staff

Legislation (H.B. 1711) has been introduced in Pennsylvania that would allow the sale of limited-edition ’50s- and ’60s-style heritage license plates.

Legislation (H.B. 1711) has been introduced in Pennsylvania that would allow the sale of limited-edition ’50s- and ’60s-style heritage license plates. The bill currently awaits consideration in the House Transportation Committee.

The heritage plates would be available for all passenger cars or trucks with a gross weight of less than 14,000 lbs., motorcycles and motor homes for an additional $50 fee. They would be available to purchase for a five-year period.

If enacted into law, the bill would not impact the state’s current specialty license plate offerings.

For more information, visit the SEMA Action Network (SAN) website.

For details, contact Christian Robinson at stateleg@sema.org.

By SEMA Washington, D.C, Staff

Legislation (H.B. 1711) has been introduced in Pennsylvania that would allow the sale of limited-edition ’50s- and ’60s-style heritage license plates.

Legislation (H.B. 1711) has been introduced in Pennsylvania that would allow the sale of limited-edition ’50s- and ’60s-style heritage license plates. The bill currently awaits consideration in the House Transportation Committee.

The heritage plates would be available for all passenger cars or trucks with a gross weight of less than 14,000 lbs., motorcycles and motor homes for an additional $50 fee. They would be available to purchase for a five-year period.

If enacted into law, the bill would not impact the state’s current specialty license plate offerings.

For more information, visit the SEMA Action Network (SAN) website.

For details, contact Christian Robinson at stateleg@sema.org.