Thu, 12/20/2007 - 00:00


Registration for SEMA Spring Expo and SEMA OFFROAD, February 8–9, 2008, in Indianapolis, is in full swing and available for attendees online by visiting www.semaspringexpo.com and www.semaoffroad.com. The spring events deliver the acclaimed SEMA Show experience to the Indianapolis area and surrounding regions. With a special emphasis on trucks and SUVs, exhibitors will display a variety of products and services covering accessories, restyling, wheels and tires, and mobile electronics.

Both shows are sponsored by the Light-Truck Accessory Alliance (TORA) and Professional Restylers Organization (PRO). For more information about TORA, click here or e-mail Jim Skelly at jimsk@sema.org. For more information about PRO, click here or e-mail Ellen McKoy at ellenm@sema.org.

Thu, 12/20/2007 - 00:00


The 14th Annual Creative Styling & Trim Awards Competition will be hosted once again by General Motors during the SEMA Spring Expo (SSE) and will feature five GM divisions—Buick, Cadillac, Chevrolet, Hummer and Pontiac.

Open to restylers, installers, truck accessory retailers and SSE exhibitors, the competition showcases and recognizes installer ingenuity, craftsmanship and creativity.

Awards will be presented in the following categories:

  • best overall interior design/car or truck
  • best graphic design/passenger car or truck
  • best exterior design/passenger car or truck
  • best of show

There is no fee to enter, however, all entries must be current-production model Buick, Cadillac, Chevrolet, Hummer or Pontiac vehicles, cars or trucks. Vehicles will be judged by a GM design team on February 8, with the awards presentation slated for Friday evening during the TORA/PRO Industry Awards Reception.

For more information or to receive a contest entry form, e-mail Beverlyr@sema.org. All entries must be received by Friday, January 18.

The SEMA Spring Expo and SEMA OFFROAD are set for February 8–9 at the Indiana Convention Center in Indianapolis. For details on the shows, visit www.semaspringexpo.com or www.semaoffroad.com.  

Thu, 12/20/2007 - 00:00


Volvo intentionally made the C30 an options- and specialty-equipment-friendly car.

Attention SEMA manufacturing members: Make plans now to attend the Volvo S40 sedan and C30 coupe Measuring Session, Wednesday, January 30, 8:30 a.m.–4:00 p.m., next door to SEMA headquarters in Diamond Bar, California.

With a slightly redesigned front end and two engine options (a 168hp, 2.4L five-cylinder or the 227hp turbocharged 2.5L T5 powerplant), the S40 is aimed at younger drivers with an inclination to customize. The C30 coupe meanwhile, powered by the T5 engine, was built with customization in mind. Volvo executives chose to let enthusiast buyers personalize their C30 with hundreds of factory accessory and specialty-equipment options (click here to read our impressions of the C30 in the October 2007 issue of SEMA News).

Details:
Volvo Cars of North America S40/C30 Measuring Session
AAA Building
1577 S. Valley Vista Dr.
Diamond Bar, CA 91765

Wednesday, January 30
8:30 a.m.-4:00 p.m.

To Register: E-mail responses with name(s), company, address and phone to: measuringsession@sema.org

Deadline to register is Friday, January 25, 2008

Questions?
-Bill Wolf: 909/396-0289, ext. 177
-Sandy Conolly: 909/396-0289, ext. 155

Thu, 12/20/2007 - 00:00

SEMA members: Ford is now accepting proposals for companies that would like to build a Ford-based project vehicle. This year's program includes new 2009 models—The Ford Flex and F-150 and the Mercury MKS. For proposal criteria and submission deadline, visit www.sema.org/oem, and click on the 2008 Ford Project Vehicle Program link under the Ford logo. For additional information on project-vehicle programs, contact Bill Wolf at billw@sema.org.

Thu, 12/20/2007 - 00:00

For those who may have missed the debut of the Discovery Channel’s SEMA Show one-hour special last week, the show is re-airing tonight, Thursday, December 20. Visit TLC's website here for times and details.

You may also want to check out the Discovery Network’s online coverage of the SEMA Show here. The site is filled with cool photos, videos and an interactive quiz.

Thu, 12/20/2007 - 00:00

Filler for eNews

Thu, 12/20/2007 - 00:00

Filler for eNews

Thu, 12/20/2007 - 00:00

A white paper describing the findings of Phase I of the SEMA Data Pool Pilot Program, facilitating the synchronization of standardized product information in industry-standard formats between a group of SEMA manufacturers and their warehouse distributor trading partners, has been published at www.sema.org/btc.

Phase I of the program acquired product-data requirements from a small number of warehouse distributors (aka receivers) via a survey and assisted a group of parts suppliers (aka manufacturers) to gather, cleanse and format their product information in a standardized format. Upon completion of that step, product data between the two was compared and synchronized utilizing the services of a broad group of aftermarket data-service companies.

Among the findings of the study:

  • Data requirements were acquired and compared from four of the top warehouse distributors in the industry and a set of required product data fields was developed.
  • The product information of six of the manufacturers was validated to the accepted industry standard.
  • Three of the six manufacturers validated their application data.
  • Five instances of complete product information synchronization between suppliers and distributors were accomplished.
  • A number of necessary changes to the standards have been identified and suggested to the standard's body.

For more information on the SEMA Data Pool Pilot Program, contact Alan Dicker at aland@sema.org.

Thu, 12/20/2007 - 00:00

Although heavily wrapped, this is reportedly the prototype for the 2010 Mustang hiding mid-cycle facelift details, including new front and rear fascias with a new grille, headlights and taillights, says spy photographer Brenda Priddy. This prototype's interior, Priddy says, was also well wrapped and yielded no clue to cabin enhancements and upgrades.

"Our shooter stumbled upon this prototype when he made a wrong turn, and found the mule during a U-turn, accounting for the lack of sharpness in the photos," Priddy says.

As for engine options, the bloggers at NewCarPark.com report that the new pony will offer a 5.8L and 6.2L BOSS V8 to keep it in league with the forthcoming Camaro and Challenger. Entry-level options should include the same 3.5L Duratec V6 from the Taurus, while the wild card may be the TwinForce V6 that appeared in the Lincoln MKR concept car, a twin-turbo 3.5L V6 reportedly outputting up to 400hp.


Thu, 12/20/2007 - 00:00

Filler for eNews