Thu, 08/22/2013 - 14:19

SEMA News—August 2013

Hey Hey

HERITAGE
By Drew Hardin
Photo Courtesy Petersen Archives

Arguably his best-known TV cars are the two GTO convertibles he modified for “The Monkees” TV show in 1966. We dug through the Petersen vault and came up with these shots, taken in June 1966 after a grueling 10-day build of the first GTO.Dean Jeffries, custom car painter, striper and builder, died in his sleep in early May. He was 80 years old. Jeffries was among the most talented of the men who shaped car culture in the ’50s and ’60s, though his profile was somewhat lower than that of George Barris, Ed Roth or Ken “Von Dutch” Howard. He may not have been as well known, but he was versatile and skilled enough that his handiwork could be found everywhere, from Gasoline Alley at Indianapolis to Hollywood movie and TV sets.

Arguably his best-known TV cars are the two GTO convertibles he modified for “The Monkees” TV show in 1966. We dug through the Petersen vault and came up with these shots, taken in June 1966 after a grueling 10-day build of the first GTO.

That’s right, one of the most iconic TV cars of all time came together in a little more than a week. In fact, Pontiac gave Jeffries two GTOs to build two Monkeemobiles, and both were finished in two weeks.

It helped that Pontiac provided Jeffries with convertible GTOs to work on, as their chassis were already reinforced and there were no metal tops to cut away.

Jeffries’ radical re-imagining of the GTO extended the car’s nose by nearly 2 ft. and the rear fenders by 18 in. The GTO’s stock oblong grille openings were retained, but they jutted out in a V angle much steeper than stock.

Arguably his best-known TV cars are the two GTO convertibles he modified for “The Monkees” TV show in 1966. We dug through the Petersen vault and came up with these shots, taken in June 1966 after a grueling 10-day build of the first GTO.Jeffries kept the GTO’s 389-in. V8 but topped the engine with a massive GMC supercharger. The blown 389 reportedly made way too much power to be usable on the show, so he took the blower’s innards out and stuck a carburetor inside the case. (He kept the blower intact on the second car, though, and it was used for car shows, exhibitions and whenever the TV show’s directors had the need for Monkeemobile speed.)

The car’s front and middle seats were stock Pontiac buckets; a third seat was fashioned out of the trunk area and upholstered to match the buckets.

Though the top looks like it folds, it doesn’t and instead is framed by square steel tube. Jeffries positioned a drag chute out back, and it was deployed for the shot taken in front of his Cahuenga Boulevard shop.

Once “The Monkees” wrapped after two seasons on the air, Jeffries was offered the chance to buy back the Monkeemobiles for $1,000 each. He refused, believing at the time that he could build another one for less. Both cars are now in the hands of private collectors.

Dean Jeffries will be remembered for much more than just these two GTOs, of course. But none of his other cars—not even the Green Hornet’s Black Beauty—got the kind of exposure that these cars did at the height of Monkee-mania.

(For those interested in learning more about Dean Jeffries’ life and custom creations, Tom Cotter has written an excellent biography, Dean Jeffries: 50 Fabulous Years in Hot Rods, Racing & Film, published by Motorbooks.)

Thu, 08/22/2013 - 13:37

By SEMA Editors

 foose
Chip Foose creates a rendering of the WD-40/SEMA Cares Foose Ford F-150 at the SEMA Garage.
  

Chip Foose and WD-40 Co. are teaming up again, this time to design a custom off-road truck that will be the first vehicle built inside the new, state-of-the-art SEMA Garage.  

Foose Design and WD-40 Co.—through a partnership with the Alex Xydias Center for Automotive Arts—will have leading SEMA manufacturers working alongside underprivileged teens and young adults to install parts and equipment on the Foose-inspired vehicle, dubbed the WD-40/SEMA Cares Foose Ford F-150. All work for the build program will be done at the recently built SEMA Garage in Diamond Bar, California—a facility that allows SEMA-member companies to test and prototype parts, try its 3D modeling and printing and use its full-scale photo studio, among other things. The completed truck will eventually be put up for raffle, with all of the proceeds going to three SEMA Cares charities.

“I'm so grateful for the opportunity to work with organizations like WD-40 Co. and SEMA Cares, who continue to support the automotive trade,” said Foose, president and CEO of Foose Design. “This year, we’ll have even more hands on deck to help out with the build, and there’ll be plenty of WD-40 brand products used throughout that process.”

Instead of being auctioned like previous WD-40/SEMA Cares vehicles, the enhanced ’13 Ford F-150 Lariat will be raffled off to one lucky winner in the spring of 2014. With raffle tickets only costing $50 starting November 1, 2013, owning a Foose-inspired truck is now more accessible than ever to all automotive enthusiasts. Proceeds from the raffled vehicle will benefit three SEMA Cares charities: the SEMA Memorial Scholarship Fund, Childhelp and Victory Junction.

“Off-roaders, truck enthusiasts and aftermarket companies have used our products for decades, for preventing mud from sticking to displacing moisture from engines,” said Tim Lesmeister, vice president of marketing for WD-40 Co. “Now, we have the next generation of automotive professionals and enthusiasts getting excited about working on a vehicle that will support a great cause, and that’s something we’re proud to be a part of.”

This is the sixth vehicle WD-40 Co. and SEMA Cares have teamed up to build and the fourth vehicle Chip Foose has designed with them. To date, WD-40/SEMA Cares vehicles have raised more than $575,000 for SEMA Cares charities. 

Thu, 08/22/2013 - 13:37

By SEMA Editors

 foose
Chip Foose creates a rendering of the WD-40/SEMA Cares Foose Ford F-150 at the SEMA Garage.
  

Chip Foose and WD-40 Co. are teaming up again, this time to design a custom off-road truck that will be the first vehicle built inside the new, state-of-the-art SEMA Garage.  

Foose Design and WD-40 Co.—through a partnership with the Alex Xydias Center for Automotive Arts—will have leading SEMA manufacturers working alongside underprivileged teens and young adults to install parts and equipment on the Foose-inspired vehicle, dubbed the WD-40/SEMA Cares Foose Ford F-150. All work for the build program will be done at the recently built SEMA Garage in Diamond Bar, California—a facility that allows SEMA-member companies to test and prototype parts, try its 3D modeling and printing and use its full-scale photo studio, among other things. The completed truck will eventually be put up for raffle, with all of the proceeds going to three SEMA Cares charities.

“I'm so grateful for the opportunity to work with organizations like WD-40 Co. and SEMA Cares, who continue to support the automotive trade,” said Foose, president and CEO of Foose Design. “This year, we’ll have even more hands on deck to help out with the build, and there’ll be plenty of WD-40 brand products used throughout that process.”

Instead of being auctioned like previous WD-40/SEMA Cares vehicles, the enhanced ’13 Ford F-150 Lariat will be raffled off to one lucky winner in the spring of 2014. With raffle tickets only costing $50 starting November 1, 2013, owning a Foose-inspired truck is now more accessible than ever to all automotive enthusiasts. Proceeds from the raffled vehicle will benefit three SEMA Cares charities: the SEMA Memorial Scholarship Fund, Childhelp and Victory Junction.

“Off-roaders, truck enthusiasts and aftermarket companies have used our products for decades, for preventing mud from sticking to displacing moisture from engines,” said Tim Lesmeister, vice president of marketing for WD-40 Co. “Now, we have the next generation of automotive professionals and enthusiasts getting excited about working on a vehicle that will support a great cause, and that’s something we’re proud to be a part of.”

This is the sixth vehicle WD-40 Co. and SEMA Cares have teamed up to build and the fourth vehicle Chip Foose has designed with them. To date, WD-40/SEMA Cares vehicles have raised more than $575,000 for SEMA Cares charities. 

Thu, 08/22/2013 - 13:37

By SEMA Editors

 foose
Chip Foose creates a rendering of the WD-40/SEMA Cares Foose Ford F-150 at the SEMA Garage.
  

Chip Foose and WD-40 Co. are teaming up again, this time to design a custom off-road truck that will be the first vehicle built inside the new, state-of-the-art SEMA Garage.  

Foose Design and WD-40 Co.—through a partnership with the Alex Xydias Center for Automotive Arts—will have leading SEMA manufacturers working alongside underprivileged teens and young adults to install parts and equipment on the Foose-inspired vehicle, dubbed the WD-40/SEMA Cares Foose Ford F-150. All work for the build program will be done at the recently built SEMA Garage in Diamond Bar, California—a facility that allows SEMA-member companies to test and prototype parts, try its 3D modeling and printing and use its full-scale photo studio, among other things. The completed truck will eventually be put up for raffle, with all of the proceeds going to three SEMA Cares charities.

“I'm so grateful for the opportunity to work with organizations like WD-40 Co. and SEMA Cares, who continue to support the automotive trade,” said Foose, president and CEO of Foose Design. “This year, we’ll have even more hands on deck to help out with the build, and there’ll be plenty of WD-40 brand products used throughout that process.”

Instead of being auctioned like previous WD-40/SEMA Cares vehicles, the enhanced ’13 Ford F-150 Lariat will be raffled off to one lucky winner in the spring of 2014. With raffle tickets only costing $50 starting November 1, 2013, owning a Foose-inspired truck is now more accessible than ever to all automotive enthusiasts. Proceeds from the raffled vehicle will benefit three SEMA Cares charities: the SEMA Memorial Scholarship Fund, Childhelp and Victory Junction.

“Off-roaders, truck enthusiasts and aftermarket companies have used our products for decades, for preventing mud from sticking to displacing moisture from engines,” said Tim Lesmeister, vice president of marketing for WD-40 Co. “Now, we have the next generation of automotive professionals and enthusiasts getting excited about working on a vehicle that will support a great cause, and that’s something we’re proud to be a part of.”

This is the sixth vehicle WD-40 Co. and SEMA Cares have teamed up to build and the fourth vehicle Chip Foose has designed with them. To date, WD-40/SEMA Cares vehicles have raised more than $575,000 for SEMA Cares charities. 

Thu, 08/22/2013 - 13:12

By Jon Wyly

 sdc
The SEMA Data Co-op will host several educational sessions at the upcoming SEMA Show in Las Vegas.
  

Join the staff of the SEMA Data Co-op for a day of information and education about Product Data Management on Monday, November 4. Two rooms have been reserved for the educational seminar, and each session will be repeated in the morning and afternoon to best accommodate busy schedules.

Topics will include introductory courses on ACES and PIES standards, advanced ACES and PIES sessions, SDC Supplier and Receiver user groups, a look into what's coming next at the SEMA Data Co-op, and for those who have not yet checked us out, an introductory session that includes a demonstration of our online data management solution. Bring your questions and participate in some lively discussion…we are here to help!

The sessions are available for free. Sign up online in advance to secure your seats, and be sure to bring anyone on your team who can benefit from this valuable face-to-face educational opportunity.

Thu, 08/22/2013 - 13:12

By Jon Wyly

 sdc
The SEMA Data Co-op will host several educational sessions at the upcoming SEMA Show in Las Vegas.
  

Join the staff of the SEMA Data Co-op for a day of information and education about Product Data Management on Monday, November 4. Two rooms have been reserved for the educational seminar, and each session will be repeated in the morning and afternoon to best accommodate busy schedules.

Topics will include introductory courses on ACES and PIES standards, advanced ACES and PIES sessions, SDC Supplier and Receiver user groups, a look into what's coming next at the SEMA Data Co-op, and for those who have not yet checked us out, an introductory session that includes a demonstration of our online data management solution. Bring your questions and participate in some lively discussion…we are here to help!

The sessions are available for free. Sign up online in advance to secure your seats, and be sure to bring anyone on your team who can benefit from this valuable face-to-face educational opportunity.

Thu, 08/22/2013 - 12:56
 SEMA Garage, SEMA Rapid Prototyping Program
The SEMA Rapid Prototyping program creates ABS plastic prototypes of  your designs without  the need of a casting mold or CNC programming.
  

By SEMA Editors

There’s always a lot going on for SEMA-member manufacturers at the SEMA Garage Innovations Center. The resources available can help you drastically cut your product development time and costs. In particular, the SEMA Rapid Prototyping program creates ABS plastic prototypes of your designs at a reduced members-only rate. The end result is faster product validation, thanks to the ability to produce prototypes without the need of a casting mold or CNC programming.

Models are printed on Dimension 3D printers, allowing you to test the form, fit and function of your product with a tough ABS plastic prototype. The completed models can also be sanded, painted or chrome-plated for a more finished look.

Learn more about SEMA's Rapid Prototyping program.

Thu, 08/22/2013 - 12:56
 SEMA Garage, SEMA Rapid Prototyping Program
The SEMA Rapid Prototyping program creates ABS plastic prototypes of  your designs without  the need of a casting mold or CNC programming.
  

By SEMA Editors

There’s always a lot going on for SEMA-member manufacturers at the SEMA Garage Innovations Center. The resources available can help you drastically cut your product development time and costs. In particular, the SEMA Rapid Prototyping program creates ABS plastic prototypes of your designs at a reduced members-only rate. The end result is faster product validation, thanks to the ability to produce prototypes without the need of a casting mold or CNC programming.

Models are printed on Dimension 3D printers, allowing you to test the form, fit and function of your product with a tough ABS plastic prototype. The completed models can also be sanded, painted or chrome-plated for a more finished look.

Learn more about SEMA's Rapid Prototyping program.

Thu, 08/22/2013 - 12:56
 SEMA Garage, SEMA Rapid Prototyping Program
The SEMA Rapid Prototyping program creates ABS plastic prototypes of  your designs without  the need of a casting mold or CNC programming.
  

By SEMA Editors

There’s always a lot going on for SEMA-member manufacturers at the SEMA Garage Innovations Center. The resources available can help you drastically cut your product development time and costs. In particular, the SEMA Rapid Prototyping program creates ABS plastic prototypes of your designs at a reduced members-only rate. The end result is faster product validation, thanks to the ability to produce prototypes without the need of a casting mold or CNC programming.

Models are printed on Dimension 3D printers, allowing you to test the form, fit and function of your product with a tough ABS plastic prototype. The completed models can also be sanded, painted or chrome-plated for a more finished look.

Learn more about SEMA's Rapid Prototyping program.

Thu, 08/22/2013 - 12:48
By SEMA Washington, D.C., Staff

West Virginia Delegate Gary Howell has been named vice chairman of the State Automotive Enthusiast Leadership Caucus. The Caucus is supported by SEMA and chaired by New York Assemblyman Bill Reilich.    

The Caucus is a bipartisan group of state lawmakers whose common thread is a love for automobiles. To date, almost 600 state legislators from all 50 states have joined the group. The Caucus serves to raise the motor-vehicle hobby’s profile in state legislatures across the country and in the eyes of the public. Many of these lawmakers have sought to preserve and expand the hobby by improving existing motor-vehicle statutes and regulations.

As a SEMA member and owner of Howell Automotive in Keyser, West Virginia, Howell immediately demonstrated his desire to get involved in keeping the laws in his state hobby-friendly when he joined the Caucus in 2011 upon his election to the West Virginia House of Delegates. He has worked extensively in the motorsports industry, raced both stock cars and drag cars, built winning race cars and award-winning show cars and designed racing parts. He has also hosted a syndicated radio show, written automotive magazine articles and served as a technical expert on automotive TV shows.

“I have been a strong advocate of SEMA-model legislation that helps car enthusiasts enjoy their hobby in a safe and responsible manner,” Howell said. “I have worked to remove the tax burden on low-income car collectors, sponsored a bill to implement an objective exhaust noise testing program and crusaded against increased ethanol blends in gasoline. I’m currently working on a car collector tag that can be transferred between vehicles, like a dealer plate. The plate could be used by collectors on recently purchased vehicles or those in the process of restoration.”     

Howell sits on the West Virginia House of Delegates' Roads and Transportation Committee in order to further help protect the rights of motor-vehicle enthusiasts. In addition, his current advocacy efforts are sensitive to the needs of small businesses—the catalyst for the United States economic engine.
 
“When I read legislation, I try to examine it through the eyes of people like Thomas Jefferson, Alexander Hamilton, James Madison, John Jay and Smokey Yunick,” Howell added. “Smokey Yunick would have made a great legislator. His ‘You read the rules for what they don't say, not for what they do,’ philosophy is one I’ve adopted. Many of the problems we experience are derived from the unintended consequences. Heeding Smokey's words helps me identify those consequences.”  

Despite his busy legislative schedule, Howell still finds time to fit in personal "car stuff" and enjoys driving his Dodge SRT-4, which won Car and Driver's 2005 SuperFour Challenge in the front-wheel-drive class. His dream car is a black ’71 GTX, 426 Hemi four-speed.

“I welcome this chance to serve as vice chairman of the Caucus in partnership with Assemblyman Reilich,” Howell concluded. “Together, the Caucus will continue to ensure the voices of auto enthusiasts are heard nationwide.”

For details, contact Steve McDonald at stevem@sema.org.