Wed, 07/01/2009 - 14:49

SEMA News - July 2009

SEMA has long recognized the potential business opportunities that the accessories market brings to dealers. The industry has caught on to this notion over the past few years, and the media have been instrumental in communicating this opportunity to the dealer community.

Particularly noteworthy are reports on the programs that highlight tangible resources available to help dealers tap into the automotive accessories market. Two programs—Dealer Day and ProPledge—were launched by SEMA to help dealers profit from the relatively untapped accessory market.

Dealer Day was launched at the SEMA Show in 2008, with the help of the National Automobile Dealers Association (NADA), to offer dealers tools, ideas and resources on how to incorporate successful accessory programs at their dealerships. NADA members were invited to this innovative half-day event at the SEMA Show, where they were treated to a number of exclusive presentations, seminars and activities.

In 2007, an auto accessory warranty program known as ProPledge debuted. ProPledge is administered by the SEMA subsidiary, Specialty Equipment Warranty Alliance (SEWA). The idea is to help dealers and consumers purchase specialty-equipment market accessory products with confidence. With the cooperation of SEMA manufacturers and professional installers, this value-added program offers a uniform industry-backed warranty that gives peace of mind to consumers.

Here are just a few of the articles that reported on Dealer Day and the ProPledge program. If you haven’t read these articles or if you missed them, check them out. They are must reads.

 SEMA NEWS-JULY 2009-REQUIRED READING

Ward’s Dealer Business, December 2008
“SEMA Show Attracts Dealers”

According to this article, SEMA paid attention to dealer needs, and the dealers truly benefited. They learned tangible strategies and heard success stories of those already in the accessory market. One keynote speaker, Tom Rudnai, president of Longo Toyota in El Monte, California, outlined the do’s and don’ts for dealers looking to get into the accessory market. Derek Adolf of the seven-franchise Continental Auto Group, sent his parts managers to the SEMA Show to showcase a variety of available products for cars and trucks that dealerships could potentially sell. Adolf spoke of his success at the previous year’s Show, when he contracted a deal with a major tire manufacturing company. Like Adolf, dealers who attended Dealer Day were able to make connections of their own. Check out the Ward’s Dealer Business website to read this article.



SEMA NEWS-JULY 2009-REQUIRED READING 

Fixed Ops Magazine, October 2008
“SEMA Show 2008: Discovering a World of New Profit Opportunities”

“Now more than ever, dealers have to keep their eyes open for new and creative strategies to make more money,” according to the October edition of Fixed Ops Magazine. The accessory sales industry remains vibrant. According to this article, “style-conscious consumers willing to pay a premium for personalized vehicles, typically spend as much as $1,000–3,500 to customize their new vehicle after the sale.” This is money that could have been spent at the dealership. Dealers must be ready to find new and creative ways to increase sales revenue. To continue with the success of last year’s event, SEMA will hold Dealer Day again at SEMA Show 2009. To find this article and many more, visit the Fixed Ops Magazine website.



 SEMA NEWS-JULY 2009-REQUIRED READING

Specialty Automotive Magazine,
March/April 2009
“Auto Accessory Warranty Program Available”

This article discussed the importance of the ProPledge program administered by SEWA. ProPledge started as a pilot program in 2007. The pilot ended after 18 months with approximately 12,000 warranted product installations and zero claims. ProPledge is designed to increase the sale of specialty automotive products through new-car dealers. The program offers dealers valuable marketing tools to sell specialty-equipment market products and will help dealers boost profits. Once the pilot proved to be successful, ProPledge was officially rolled out nationwide in January 2009. To see a list of participating manufacturers and installers or for more information visit ProPledge.



 SEMA NEWS-JULY 2009-REQUIRED READING 

Mobile Electronics, November 2008
“What’s Going On: Making a Case for SEMA”

While SEMA offers many educational programs, Dealer Day was important with helping dealers enter the restyling industry. Participating dealers had the opportunity to meet directly with experts who shared real-world case studies. This article explained that, along with the challenges of starting an accessory program, there are many opportunities to advance and SEMA is there to help build a bridge between dealers and manufacturers. According to Mobile Electronics, one piece of the puzzle is to understand what challenges may come; it’s an entirely different thing to know where the opportunities are. Dealers have the opportunity to increase revenue by tapping into the accessory market. Dealer Day is just one example of how SEMA builds relationships with dealers and the members of the accessory specialty-equipment market.

Wed, 07/01/2009 - 14:49

SEMA News - July 2009

SEMA has long recognized the potential business opportunities that the accessories market brings to dealers. The industry has caught on to this notion over the past few years, and the media have been instrumental in communicating this opportunity to the dealer community.

Particularly noteworthy are reports on the programs that highlight tangible resources available to help dealers tap into the automotive accessories market. Two programs—Dealer Day and ProPledge—were launched by SEMA to help dealers profit from the relatively untapped accessory market.

Dealer Day was launched at the SEMA Show in 2008, with the help of the National Automobile Dealers Association (NADA), to offer dealers tools, ideas and resources on how to incorporate successful accessory programs at their dealerships. NADA members were invited to this innovative half-day event at the SEMA Show, where they were treated to a number of exclusive presentations, seminars and activities.

In 2007, an auto accessory warranty program known as ProPledge debuted. ProPledge is administered by the SEMA subsidiary, Specialty Equipment Warranty Alliance (SEWA). The idea is to help dealers and consumers purchase specialty-equipment market accessory products with confidence. With the cooperation of SEMA manufacturers and professional installers, this value-added program offers a uniform industry-backed warranty that gives peace of mind to consumers.

Here are just a few of the articles that reported on Dealer Day and the ProPledge program. If you haven’t read these articles or if you missed them, check them out. They are must reads.

 SEMA NEWS-JULY 2009-REQUIRED READING

Ward’s Dealer Business, December 2008
“SEMA Show Attracts Dealers”

According to this article, SEMA paid attention to dealer needs, and the dealers truly benefited. They learned tangible strategies and heard success stories of those already in the accessory market. One keynote speaker, Tom Rudnai, president of Longo Toyota in El Monte, California, outlined the do’s and don’ts for dealers looking to get into the accessory market. Derek Adolf of the seven-franchise Continental Auto Group, sent his parts managers to the SEMA Show to showcase a variety of available products for cars and trucks that dealerships could potentially sell. Adolf spoke of his success at the previous year’s Show, when he contracted a deal with a major tire manufacturing company. Like Adolf, dealers who attended Dealer Day were able to make connections of their own. Check out the Ward’s Dealer Business website to read this article.



SEMA NEWS-JULY 2009-REQUIRED READING 

Fixed Ops Magazine, October 2008
“SEMA Show 2008: Discovering a World of New Profit Opportunities”

“Now more than ever, dealers have to keep their eyes open for new and creative strategies to make more money,” according to the October edition of Fixed Ops Magazine. The accessory sales industry remains vibrant. According to this article, “style-conscious consumers willing to pay a premium for personalized vehicles, typically spend as much as $1,000–3,500 to customize their new vehicle after the sale.” This is money that could have been spent at the dealership. Dealers must be ready to find new and creative ways to increase sales revenue. To continue with the success of last year’s event, SEMA will hold Dealer Day again at SEMA Show 2009. To find this article and many more, visit the Fixed Ops Magazine website.



 SEMA NEWS-JULY 2009-REQUIRED READING

Specialty Automotive Magazine,
March/April 2009
“Auto Accessory Warranty Program Available”

This article discussed the importance of the ProPledge program administered by SEWA. ProPledge started as a pilot program in 2007. The pilot ended after 18 months with approximately 12,000 warranted product installations and zero claims. ProPledge is designed to increase the sale of specialty automotive products through new-car dealers. The program offers dealers valuable marketing tools to sell specialty-equipment market products and will help dealers boost profits. Once the pilot proved to be successful, ProPledge was officially rolled out nationwide in January 2009. To see a list of participating manufacturers and installers or for more information visit ProPledge.



 SEMA NEWS-JULY 2009-REQUIRED READING 

Mobile Electronics, November 2008
“What’s Going On: Making a Case for SEMA”

While SEMA offers many educational programs, Dealer Day was important with helping dealers enter the restyling industry. Participating dealers had the opportunity to meet directly with experts who shared real-world case studies. This article explained that, along with the challenges of starting an accessory program, there are many opportunities to advance and SEMA is there to help build a bridge between dealers and manufacturers. According to Mobile Electronics, one piece of the puzzle is to understand what challenges may come; it’s an entirely different thing to know where the opportunities are. Dealers have the opportunity to increase revenue by tapping into the accessory market. Dealer Day is just one example of how SEMA builds relationships with dealers and the members of the accessory specialty-equipment market.

Wed, 07/01/2009 - 14:49

SEMA News - July 2009
BUSINESS

By Alysha Webb

 

Horsepower and Green Power Can Coexist Without Sacrificing Performance

SEMA News-July 2009-Green 1 
From left: Chris Aylett, CEO, Motorsports Industry Association (MIA); Chris Kersting, president and CEO, SEMA; Blake Fuller, founder, Braille Battery; and Azhar Hussain, founder, TTxGP Ltd., discuss green business opportunities in the performance aftermarket during the recent The Race Goes Green conference in Long Beach, California. 

Troy Lee of Troy Lee Designs uses water-based paints to create hip motorcycle helmets. He uses recycled paper and rubber products. But Troy Lee wants to push the envelope more on greenness, just as he does with his designs. Both are good for business, he says.

“SEMA is all about being cool,” says Lee. “Being green will be a competitive edge.”

Lee attended “The Race Goes Green,” an April 16 conference presented by SEMA and the Motorsports Industry Association (MIA). The venue was the Toyota Grand Prix of Long Beach; the message was that green power and horsepower can coexist without sacrificing performance or the cool factor and that there are emerging opportunities for SEMA companies that can make green cool.

SEMA members need to start looking for products that pair performance and green if they want to be ready for the future, says John Waraniak, SEMA vice president of vehicle technology. “If you wait for everything to be figured out, you will almost be too late.”

To be sure, environmental awareness doesn’t yet play a huge role in the enhanced performance equation. But technology is advancing in “big chunks,” said SEMA President and CEO Chris Kersting to the attendees at the conference. “People need to be looking down the road.”

SEMA member Blake Fuller is already making green pay. His profitable company, Braille Battery, sells the world’s first carbon-fiber battery and uses recycled lead, plastic and stainless steel in its products. Most of Braille Battery’s growth has occurred in the last two years, says Fuller. He projects sales will double in 2009 compared to 2008 with $2 million.

Fuller knows green technology doesn’t sell in the performance world, however. Winning does. “The fact that technology wins will pull in young audiences,” he says. “The fact that it is green will be a byproduct.”

 

SEMA News-July 2009-Green 2 Mike Jackson, CEO, AutoNation.
   
SEMA News-July 2009-Green 3 Sam Konduros, Clemson University.
   
SEMA News-July 2009-Green 4 Don Taylor, Eclipse Management.
   
SEMA News-July 2009-Green 5 From left: Aylett; Nick Hayes, nHanse; Pete Spence, Technical Director, Toyota Racing Development USA Inc.; Adrian Moore, Technical Director, Xtrac; Doug Cross, Technical Director, Flybrid Systems LLP.

 

 

Braille teamed up with Nissan on the Nissan Altima Hot Rod Hybrid, which won its class at the Florida Electric Auto Association’s Beach Battery Burnout on February 21–22. “You have to go to where the competition is hardest for cutting-edge technology,” says Fuller.

The market for performance-enhancing green technology is potentially huge, says Waraniak. Some 40 million new drivers will hit the roads over the next 10 years. Many will buy alternative-fuel vehicles and want to trick them out, he says. An even bigger opportunity lies in the 225 million existing vehicles, says Waraniak. Those can be retrofitted with cool green technology.

Tricking out new and existing cars to be both green and cool is a small but growing part of his business, says Beau Boeckman, president of Galpin Auto Sports (GAS) LLC. SEMA member A123 System’s aftermarket division Hymotion provides lithium-ion batteries to GAS for Toyota Prius sedans, hot rods and musclecars, for example.

But faster growth will depend on more companies coming out with products that aren’t just green and cool, but are also affordable and beneficial, says Boeckman. “If it’s green and it actually performs well, that is what is going to sell,” he says.

The motorsports industry can help.

 

SEMA News-July 2009-Green 6 Chris Norris, Swift Engineering.
   
   
SEMA News-July 2009-Green 8 Jeremy Burne, North American Director, MIA.
   
SEMA News-July 2009-Green 9 Terry Angstadt, President, IRL-Commercial Division.

Racing accelerates technology development and processes that migrate to production vehicles, says Waraniak, and green racing “absolutely helps advance the green cause.”

Says Mike Jackson, CEO of AutoNation Inc., the largest dealership group in the United States: “Racing is a platform that can play an incredible role in educating people that you can be green and still have performance.”

Motorcycle racing is doing its part to prove green and speed can coexist. Azhar Hussain is the founder of TTxGP Ltd., a zero carbon-emissions motorcycle race. Twenty-four teams signed up for the race, which was held on June 12 on the challenging Isle of Man Mountain Course in the United Kingdom. The bikes were powered by electric drivetrains. Hussain wants to take the technology into cars. “We think we can take on the combustion engine in five years,” he says.

Much of the technology on the bikes doesn’t come from U.S. companies who “aren’t focused on this area,” says Hussain. Batteries are from Korea and Taiwan, the control system is from China and the motors India. It could be an opportunity for U.S. firms.

But don’t forget the cool factor. Advises Jay Stemka, head of custom paint at Troy Lee: “Make it look really good, make it fast, and there will be buyers.”

Wed, 07/01/2009 - 14:49

SEMA News - July 2009
BUSINESS

By Alysha Webb

 

Horsepower and Green Power Can Coexist Without Sacrificing Performance

SEMA News-July 2009-Green 1 
From left: Chris Aylett, CEO, Motorsports Industry Association (MIA); Chris Kersting, president and CEO, SEMA; Blake Fuller, founder, Braille Battery; and Azhar Hussain, founder, TTxGP Ltd., discuss green business opportunities in the performance aftermarket during the recent The Race Goes Green conference in Long Beach, California. 

Troy Lee of Troy Lee Designs uses water-based paints to create hip motorcycle helmets. He uses recycled paper and rubber products. But Troy Lee wants to push the envelope more on greenness, just as he does with his designs. Both are good for business, he says.

“SEMA is all about being cool,” says Lee. “Being green will be a competitive edge.”

Lee attended “The Race Goes Green,” an April 16 conference presented by SEMA and the Motorsports Industry Association (MIA). The venue was the Toyota Grand Prix of Long Beach; the message was that green power and horsepower can coexist without sacrificing performance or the cool factor and that there are emerging opportunities for SEMA companies that can make green cool.

SEMA members need to start looking for products that pair performance and green if they want to be ready for the future, says John Waraniak, SEMA vice president of vehicle technology. “If you wait for everything to be figured out, you will almost be too late.”

To be sure, environmental awareness doesn’t yet play a huge role in the enhanced performance equation. But technology is advancing in “big chunks,” said SEMA President and CEO Chris Kersting to the attendees at the conference. “People need to be looking down the road.”

SEMA member Blake Fuller is already making green pay. His profitable company, Braille Battery, sells the world’s first carbon-fiber battery and uses recycled lead, plastic and stainless steel in its products. Most of Braille Battery’s growth has occurred in the last two years, says Fuller. He projects sales will double in 2009 compared to 2008 with $2 million.

Fuller knows green technology doesn’t sell in the performance world, however. Winning does. “The fact that technology wins will pull in young audiences,” he says. “The fact that it is green will be a byproduct.”

 

SEMA News-July 2009-Green 2 Mike Jackson, CEO, AutoNation.
   
SEMA News-July 2009-Green 3 Sam Konduros, Clemson University.
   
SEMA News-July 2009-Green 4 Don Taylor, Eclipse Management.
   
SEMA News-July 2009-Green 5 From left: Aylett; Nick Hayes, nHanse; Pete Spence, Technical Director, Toyota Racing Development USA Inc.; Adrian Moore, Technical Director, Xtrac; Doug Cross, Technical Director, Flybrid Systems LLP.

 

 

Braille teamed up with Nissan on the Nissan Altima Hot Rod Hybrid, which won its class at the Florida Electric Auto Association’s Beach Battery Burnout on February 21–22. “You have to go to where the competition is hardest for cutting-edge technology,” says Fuller.

The market for performance-enhancing green technology is potentially huge, says Waraniak. Some 40 million new drivers will hit the roads over the next 10 years. Many will buy alternative-fuel vehicles and want to trick them out, he says. An even bigger opportunity lies in the 225 million existing vehicles, says Waraniak. Those can be retrofitted with cool green technology.

Tricking out new and existing cars to be both green and cool is a small but growing part of his business, says Beau Boeckman, president of Galpin Auto Sports (GAS) LLC. SEMA member A123 System’s aftermarket division Hymotion provides lithium-ion batteries to GAS for Toyota Prius sedans, hot rods and musclecars, for example.

But faster growth will depend on more companies coming out with products that aren’t just green and cool, but are also affordable and beneficial, says Boeckman. “If it’s green and it actually performs well, that is what is going to sell,” he says.

The motorsports industry can help.

 

SEMA News-July 2009-Green 6 Chris Norris, Swift Engineering.
   
   
SEMA News-July 2009-Green 8 Jeremy Burne, North American Director, MIA.
   
SEMA News-July 2009-Green 9 Terry Angstadt, President, IRL-Commercial Division.

Racing accelerates technology development and processes that migrate to production vehicles, says Waraniak, and green racing “absolutely helps advance the green cause.”

Says Mike Jackson, CEO of AutoNation Inc., the largest dealership group in the United States: “Racing is a platform that can play an incredible role in educating people that you can be green and still have performance.”

Motorcycle racing is doing its part to prove green and speed can coexist. Azhar Hussain is the founder of TTxGP Ltd., a zero carbon-emissions motorcycle race. Twenty-four teams signed up for the race, which was held on June 12 on the challenging Isle of Man Mountain Course in the United Kingdom. The bikes were powered by electric drivetrains. Hussain wants to take the technology into cars. “We think we can take on the combustion engine in five years,” he says.

Much of the technology on the bikes doesn’t come from U.S. companies who “aren’t focused on this area,” says Hussain. Batteries are from Korea and Taiwan, the control system is from China and the motors India. It could be an opportunity for U.S. firms.

But don’t forget the cool factor. Advises Jay Stemka, head of custom paint at Troy Lee: “Make it look really good, make it fast, and there will be buyers.”

Wed, 07/01/2009 - 14:49

SEMA News - July 2009
BUSINESS

By Alysha Webb

 

Horsepower and Green Power Can Coexist Without Sacrificing Performance

SEMA News-July 2009-Green 1 
From left: Chris Aylett, CEO, Motorsports Industry Association (MIA); Chris Kersting, president and CEO, SEMA; Blake Fuller, founder, Braille Battery; and Azhar Hussain, founder, TTxGP Ltd., discuss green business opportunities in the performance aftermarket during the recent The Race Goes Green conference in Long Beach, California. 

Troy Lee of Troy Lee Designs uses water-based paints to create hip motorcycle helmets. He uses recycled paper and rubber products. But Troy Lee wants to push the envelope more on greenness, just as he does with his designs. Both are good for business, he says.

“SEMA is all about being cool,” says Lee. “Being green will be a competitive edge.”

Lee attended “The Race Goes Green,” an April 16 conference presented by SEMA and the Motorsports Industry Association (MIA). The venue was the Toyota Grand Prix of Long Beach; the message was that green power and horsepower can coexist without sacrificing performance or the cool factor and that there are emerging opportunities for SEMA companies that can make green cool.

SEMA members need to start looking for products that pair performance and green if they want to be ready for the future, says John Waraniak, SEMA vice president of vehicle technology. “If you wait for everything to be figured out, you will almost be too late.”

To be sure, environmental awareness doesn’t yet play a huge role in the enhanced performance equation. But technology is advancing in “big chunks,” said SEMA President and CEO Chris Kersting to the attendees at the conference. “People need to be looking down the road.”

SEMA member Blake Fuller is already making green pay. His profitable company, Braille Battery, sells the world’s first carbon-fiber battery and uses recycled lead, plastic and stainless steel in its products. Most of Braille Battery’s growth has occurred in the last two years, says Fuller. He projects sales will double in 2009 compared to 2008 with $2 million.

Fuller knows green technology doesn’t sell in the performance world, however. Winning does. “The fact that technology wins will pull in young audiences,” he says. “The fact that it is green will be a byproduct.”

 

SEMA News-July 2009-Green 2 Mike Jackson, CEO, AutoNation.
   
SEMA News-July 2009-Green 3 Sam Konduros, Clemson University.
   
SEMA News-July 2009-Green 4 Don Taylor, Eclipse Management.
   
SEMA News-July 2009-Green 5 From left: Aylett; Nick Hayes, nHanse; Pete Spence, Technical Director, Toyota Racing Development USA Inc.; Adrian Moore, Technical Director, Xtrac; Doug Cross, Technical Director, Flybrid Systems LLP.

 

 

Braille teamed up with Nissan on the Nissan Altima Hot Rod Hybrid, which won its class at the Florida Electric Auto Association’s Beach Battery Burnout on February 21–22. “You have to go to where the competition is hardest for cutting-edge technology,” says Fuller.

The market for performance-enhancing green technology is potentially huge, says Waraniak. Some 40 million new drivers will hit the roads over the next 10 years. Many will buy alternative-fuel vehicles and want to trick them out, he says. An even bigger opportunity lies in the 225 million existing vehicles, says Waraniak. Those can be retrofitted with cool green technology.

Tricking out new and existing cars to be both green and cool is a small but growing part of his business, says Beau Boeckman, president of Galpin Auto Sports (GAS) LLC. SEMA member A123 System’s aftermarket division Hymotion provides lithium-ion batteries to GAS for Toyota Prius sedans, hot rods and musclecars, for example.

But faster growth will depend on more companies coming out with products that aren’t just green and cool, but are also affordable and beneficial, says Boeckman. “If it’s green and it actually performs well, that is what is going to sell,” he says.

The motorsports industry can help.

 

SEMA News-July 2009-Green 6 Chris Norris, Swift Engineering.
   
   
SEMA News-July 2009-Green 8 Jeremy Burne, North American Director, MIA.
   
SEMA News-July 2009-Green 9 Terry Angstadt, President, IRL-Commercial Division.

Racing accelerates technology development and processes that migrate to production vehicles, says Waraniak, and green racing “absolutely helps advance the green cause.”

Says Mike Jackson, CEO of AutoNation Inc., the largest dealership group in the United States: “Racing is a platform that can play an incredible role in educating people that you can be green and still have performance.”

Motorcycle racing is doing its part to prove green and speed can coexist. Azhar Hussain is the founder of TTxGP Ltd., a zero carbon-emissions motorcycle race. Twenty-four teams signed up for the race, which was held on June 12 on the challenging Isle of Man Mountain Course in the United Kingdom. The bikes were powered by electric drivetrains. Hussain wants to take the technology into cars. “We think we can take on the combustion engine in five years,” he says.

Much of the technology on the bikes doesn’t come from U.S. companies who “aren’t focused on this area,” says Hussain. Batteries are from Korea and Taiwan, the control system is from China and the motors India. It could be an opportunity for U.S. firms.

But don’t forget the cool factor. Advises Jay Stemka, head of custom paint at Troy Lee: “Make it look really good, make it fast, and there will be buyers.”

Wed, 07/01/2009 - 14:49

SEMA News - July 2009

Law and Order

 SEMA NEWS-JULY 2009-GOVERMENT AFFAIRS-LAW AND ORDER

Law and Order is an update of some of the most recent federal and state legislative and regulatory issues that could potentially impact the automotive specialty-equipment industry. These include issues affecting small-business owners and their employees.

 


Connecticut

Property Taxes: A SEMA-supported bill has been introduced in the Connecticut State Legislature to provide an exemption from property taxes for antique, rare and special-interest vehicles. The bill is pending in the Joint Transportation Committee for consideration. Connecticut law defines an “antique, rare or special-interest motor vehicle” as a motor vehicle 20 years old or older that is being preserved because of historic interest and that is not altered or modified from the original manufacturer’s specifications.

Montana

Exhaust Noise: Montana legislation that sought to repeal a SEMA-sponsored law enacted in 2007 that permits vehicles with modified exhaust systems that do not emit an excess of 95 decibels died when the legislature adjourned for the year. Under the repeal legislation, Montana would have returned to subjective noise-level determinations when considering whether an exhaust system is legal.

North Carolina

Street Rods/Customs: The North Carolina House Transportation Committee passed a version of SEMA-model legislation to create a vehicle registration classification for street rods, replicas and custom vehicles. The bill is the product of negotiations between SEMA and the hobbyist network in North Carolina and retains the key components of the SEMA-model bill while relieving vehicle owners of unfair title branding and inspection concerns. The bill defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured in or after 1949. The measure also allows replica vehicles to be assigned certificates of title bearing the same model-year designations as the production vehicles intended to be replicated.

Scrappage: SEMA is opposing North Carolina legislation that would implement a state vehicle scrappage program for passenger vehicles that are at least 14 years old. A participant would receive around $1,000–$1,500 to scrap a car and purchase a current-year vehicle under 10,000 lbs. or one from the previous three model years. The participant’s family income must be less than 300% of the current federal poverty level. All trade-in vehicles could be destroyed, regardless of their historical value or collector interest. If this effort is successful, hobbyists could be denied the availability of vintage cars and parts for restoration projects.

Oregon

Aftermarket Parts: The Oregon House Environment and Water Committee approved an alternative to legislation that originally sought to prohibit the sale and distribution of aftermarket motor-vehicle parts if alternatives are available that “decrease greenhouse gas emissions from motor vehicles.” Under the alternative, negotiated between SEMA and the Oregon Department of Environmental Quality, the bill would only give the department authority to adopt the present California certification process for aftermarket emissions-related parts, allowing parts manufacturers to meet one uniform standard rather than a patchwork of multiple state standards. The amended legislation will also incorporate a California law that requires state regulators to develop a tire fuel-efficiency program for passenger-car and light-truck replacement tires. As in California, Oregon will include a SEMA-drafted provision to exempt limited-production tires (15,000 or less annually), deep-tread snow tires, limited-use spares, motorcycle tires and tires manufactured for use on off-road vehicles.

Texas

Street Rods/Customs: SEMA-model legislation to create new vehicle registration and titling classifications for street rods and custom vehicles and provide for special license plates for these vehicles was approved by the Texas House Transportation Committee. The bill defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured after 1948. The measure also allows replica vehicles to be assigned certificates of title bearing the same model-year designations as the production vehicles they most closely resemble.

FEDERAL UPDATE

Vehicle Scrappage: Congress is finalizing “Cash for Clunkers” legislation that would pay consumers to scrap cars and trucks that get less than 18 miles per gallon in exchange for a cash voucher to buy a new car. This latest effort is the result of negotiations between the Obama administration and the congressional leadership. Under the proposed bill, consumers would receive either $3,500 or $4,500, depending on the fuel-economy improvement of the new vehicle. Lawmakers are attempting to direct new-car sales to automakers and dealerships. SEMA supports the concept of vouchers to help consumers purchase new, fuel-efficient cars but opposes connecting these incentives to vehicle scrappage requirements. SEMA is working with lawmakers to find ways to minimize the harm a motor-vehicle scrappage program will impose on thousands of independent repair shops, auto restorers, customizers and their customers across the country. SEMA will promote instead a government incentive program that will help clean the environment, provide for vehicle and parts recycling and preserve collector cars for future generations.

Roof Crush Rule: The National Highway Traffic Safety Administration strengthened the vehicle roof crush rule, Federal Motor Vehicle Safety Standard No. 216. The new standard will require manufacturers to design roofs that withstand at least three times the weight of a light-duty vehicle (up to 6,000 lbs.) during a two-sided roof strength test. The current standard, which had remained unchanged since 1971, requires the roof to support at least 1.5 times the vehicle weight when tested on one side only. The tests are conducted by pressing a metal plate down on the roof over the driver’s seat, then the passenger’s seat. The NHTSA will continue to rely on static tests rather than include a dynamic test to simulate a vehicle rollover. The requirements will be phased in over a four-year period between 2012 and 2016. The NHTSA estimates that compliance costs will range from $69–$114 per vehicle. The NHTSA responded to SEMA’s concern that the rule accommodates installation of aftermarket sunroofs and other products that interact with the roof.

The NHTSA noted that vehicles with sunroofs had been tested under the new requirements and passed, and that the agency did not foresee any problems with aftermarket installations.

Greenhouse Gases: The U.S. Environmental Protection Agency (EPA) issued a finding that high levels of carbon dioxide (CO2) emissions endanger the health and welfare of current and future generations of Americans. The decision comes nearly two years after the Supreme Court ruled that the EPA had the authority and duty to consider regulating CO2 emissions. The court’s intervention was sought since CO2 is a natural chemical rather than a traditional “pollutant” subject to EPA oversight under the Clean Air Act (CAA). The Obama administration would prefer that lawmakers pass a new law to define the best approach for regulating CO2 emissions rather than using the current CAA for enforcement. House and Senate committees are currently debating the issue, with the goal of enacting a new law this year. Topics under discussion include limiting regulatory oversight to the largest greenhouse gas contributors—power plants and oil refineries, large factories and automobiles—and potentially establishing a cap-and-trade system for CO2 emissions or a carbon tax. Lawmakers will also likely tie auto standards to the Corporate Average Fuel Economy program, since there is a direct relationship between reductions in carbon fuel consumption and CO2 emissions.

Small-Business Credit Relief: The U.S. Small Business Administration (SBA) has temporarily expanded the size requirements for SBA-backed 7(a) loans in order to help insert more liquidity into the marketplace. The SBA estimates that more than 70,000 small businesses across the country will be eligible for new loans between now and the time the program ends on September 30, 2010, including many auto-sector businesses. The temporary-loan size standard will allow businesses to qualify based on net worth and average income (rather than by the number of employees). The company’s net worth cannot exceed $8.5 million, and average net income after federal income taxes for the preceding two completed fiscal years cannot be more than $3 million.

Wed, 07/01/2009 - 14:49

SEMA News - July 2009

Law and Order

 SEMA NEWS-JULY 2009-GOVERMENT AFFAIRS-LAW AND ORDER

Law and Order is an update of some of the most recent federal and state legislative and regulatory issues that could potentially impact the automotive specialty-equipment industry. These include issues affecting small-business owners and their employees.

 


Connecticut

Property Taxes: A SEMA-supported bill has been introduced in the Connecticut State Legislature to provide an exemption from property taxes for antique, rare and special-interest vehicles. The bill is pending in the Joint Transportation Committee for consideration. Connecticut law defines an “antique, rare or special-interest motor vehicle” as a motor vehicle 20 years old or older that is being preserved because of historic interest and that is not altered or modified from the original manufacturer’s specifications.

Montana

Exhaust Noise: Montana legislation that sought to repeal a SEMA-sponsored law enacted in 2007 that permits vehicles with modified exhaust systems that do not emit an excess of 95 decibels died when the legislature adjourned for the year. Under the repeal legislation, Montana would have returned to subjective noise-level determinations when considering whether an exhaust system is legal.

North Carolina

Street Rods/Customs: The North Carolina House Transportation Committee passed a version of SEMA-model legislation to create a vehicle registration classification for street rods, replicas and custom vehicles. The bill is the product of negotiations between SEMA and the hobbyist network in North Carolina and retains the key components of the SEMA-model bill while relieving vehicle owners of unfair title branding and inspection concerns. The bill defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured in or after 1949. The measure also allows replica vehicles to be assigned certificates of title bearing the same model-year designations as the production vehicles intended to be replicated.

Scrappage: SEMA is opposing North Carolina legislation that would implement a state vehicle scrappage program for passenger vehicles that are at least 14 years old. A participant would receive around $1,000–$1,500 to scrap a car and purchase a current-year vehicle under 10,000 lbs. or one from the previous three model years. The participant’s family income must be less than 300% of the current federal poverty level. All trade-in vehicles could be destroyed, regardless of their historical value or collector interest. If this effort is successful, hobbyists could be denied the availability of vintage cars and parts for restoration projects.

Oregon

Aftermarket Parts: The Oregon House Environment and Water Committee approved an alternative to legislation that originally sought to prohibit the sale and distribution of aftermarket motor-vehicle parts if alternatives are available that “decrease greenhouse gas emissions from motor vehicles.” Under the alternative, negotiated between SEMA and the Oregon Department of Environmental Quality, the bill would only give the department authority to adopt the present California certification process for aftermarket emissions-related parts, allowing parts manufacturers to meet one uniform standard rather than a patchwork of multiple state standards. The amended legislation will also incorporate a California law that requires state regulators to develop a tire fuel-efficiency program for passenger-car and light-truck replacement tires. As in California, Oregon will include a SEMA-drafted provision to exempt limited-production tires (15,000 or less annually), deep-tread snow tires, limited-use spares, motorcycle tires and tires manufactured for use on off-road vehicles.

Texas

Street Rods/Customs: SEMA-model legislation to create new vehicle registration and titling classifications for street rods and custom vehicles and provide for special license plates for these vehicles was approved by the Texas House Transportation Committee. The bill defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured after 1948. The measure also allows replica vehicles to be assigned certificates of title bearing the same model-year designations as the production vehicles they most closely resemble.

FEDERAL UPDATE

Vehicle Scrappage: Congress is finalizing “Cash for Clunkers” legislation that would pay consumers to scrap cars and trucks that get less than 18 miles per gallon in exchange for a cash voucher to buy a new car. This latest effort is the result of negotiations between the Obama administration and the congressional leadership. Under the proposed bill, consumers would receive either $3,500 or $4,500, depending on the fuel-economy improvement of the new vehicle. Lawmakers are attempting to direct new-car sales to automakers and dealerships. SEMA supports the concept of vouchers to help consumers purchase new, fuel-efficient cars but opposes connecting these incentives to vehicle scrappage requirements. SEMA is working with lawmakers to find ways to minimize the harm a motor-vehicle scrappage program will impose on thousands of independent repair shops, auto restorers, customizers and their customers across the country. SEMA will promote instead a government incentive program that will help clean the environment, provide for vehicle and parts recycling and preserve collector cars for future generations.

Roof Crush Rule: The National Highway Traffic Safety Administration strengthened the vehicle roof crush rule, Federal Motor Vehicle Safety Standard No. 216. The new standard will require manufacturers to design roofs that withstand at least three times the weight of a light-duty vehicle (up to 6,000 lbs.) during a two-sided roof strength test. The current standard, which had remained unchanged since 1971, requires the roof to support at least 1.5 times the vehicle weight when tested on one side only. The tests are conducted by pressing a metal plate down on the roof over the driver’s seat, then the passenger’s seat. The NHTSA will continue to rely on static tests rather than include a dynamic test to simulate a vehicle rollover. The requirements will be phased in over a four-year period between 2012 and 2016. The NHTSA estimates that compliance costs will range from $69–$114 per vehicle. The NHTSA responded to SEMA’s concern that the rule accommodates installation of aftermarket sunroofs and other products that interact with the roof.

The NHTSA noted that vehicles with sunroofs had been tested under the new requirements and passed, and that the agency did not foresee any problems with aftermarket installations.

Greenhouse Gases: The U.S. Environmental Protection Agency (EPA) issued a finding that high levels of carbon dioxide (CO2) emissions endanger the health and welfare of current and future generations of Americans. The decision comes nearly two years after the Supreme Court ruled that the EPA had the authority and duty to consider regulating CO2 emissions. The court’s intervention was sought since CO2 is a natural chemical rather than a traditional “pollutant” subject to EPA oversight under the Clean Air Act (CAA). The Obama administration would prefer that lawmakers pass a new law to define the best approach for regulating CO2 emissions rather than using the current CAA for enforcement. House and Senate committees are currently debating the issue, with the goal of enacting a new law this year. Topics under discussion include limiting regulatory oversight to the largest greenhouse gas contributors—power plants and oil refineries, large factories and automobiles—and potentially establishing a cap-and-trade system for CO2 emissions or a carbon tax. Lawmakers will also likely tie auto standards to the Corporate Average Fuel Economy program, since there is a direct relationship between reductions in carbon fuel consumption and CO2 emissions.

Small-Business Credit Relief: The U.S. Small Business Administration (SBA) has temporarily expanded the size requirements for SBA-backed 7(a) loans in order to help insert more liquidity into the marketplace. The SBA estimates that more than 70,000 small businesses across the country will be eligible for new loans between now and the time the program ends on September 30, 2010, including many auto-sector businesses. The temporary-loan size standard will allow businesses to qualify based on net worth and average income (rather than by the number of employees). The company’s net worth cannot exceed $8.5 million, and average net income after federal income taxes for the preceding two completed fiscal years cannot be more than $3 million.

Wed, 07/01/2009 - 14:49

SEMA News - July 2009

Law and Order

 SEMA NEWS-JULY 2009-GOVERMENT AFFAIRS-LAW AND ORDER

Law and Order is an update of some of the most recent federal and state legislative and regulatory issues that could potentially impact the automotive specialty-equipment industry. These include issues affecting small-business owners and their employees.

 


Connecticut

Property Taxes: A SEMA-supported bill has been introduced in the Connecticut State Legislature to provide an exemption from property taxes for antique, rare and special-interest vehicles. The bill is pending in the Joint Transportation Committee for consideration. Connecticut law defines an “antique, rare or special-interest motor vehicle” as a motor vehicle 20 years old or older that is being preserved because of historic interest and that is not altered or modified from the original manufacturer’s specifications.

Montana

Exhaust Noise: Montana legislation that sought to repeal a SEMA-sponsored law enacted in 2007 that permits vehicles with modified exhaust systems that do not emit an excess of 95 decibels died when the legislature adjourned for the year. Under the repeal legislation, Montana would have returned to subjective noise-level determinations when considering whether an exhaust system is legal.

North Carolina

Street Rods/Customs: The North Carolina House Transportation Committee passed a version of SEMA-model legislation to create a vehicle registration classification for street rods, replicas and custom vehicles. The bill is the product of negotiations between SEMA and the hobbyist network in North Carolina and retains the key components of the SEMA-model bill while relieving vehicle owners of unfair title branding and inspection concerns. The bill defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured in or after 1949. The measure also allows replica vehicles to be assigned certificates of title bearing the same model-year designations as the production vehicles intended to be replicated.

Scrappage: SEMA is opposing North Carolina legislation that would implement a state vehicle scrappage program for passenger vehicles that are at least 14 years old. A participant would receive around $1,000–$1,500 to scrap a car and purchase a current-year vehicle under 10,000 lbs. or one from the previous three model years. The participant’s family income must be less than 300% of the current federal poverty level. All trade-in vehicles could be destroyed, regardless of their historical value or collector interest. If this effort is successful, hobbyists could be denied the availability of vintage cars and parts for restoration projects.

Oregon

Aftermarket Parts: The Oregon House Environment and Water Committee approved an alternative to legislation that originally sought to prohibit the sale and distribution of aftermarket motor-vehicle parts if alternatives are available that “decrease greenhouse gas emissions from motor vehicles.” Under the alternative, negotiated between SEMA and the Oregon Department of Environmental Quality, the bill would only give the department authority to adopt the present California certification process for aftermarket emissions-related parts, allowing parts manufacturers to meet one uniform standard rather than a patchwork of multiple state standards. The amended legislation will also incorporate a California law that requires state regulators to develop a tire fuel-efficiency program for passenger-car and light-truck replacement tires. As in California, Oregon will include a SEMA-drafted provision to exempt limited-production tires (15,000 or less annually), deep-tread snow tires, limited-use spares, motorcycle tires and tires manufactured for use on off-road vehicles.

Texas

Street Rods/Customs: SEMA-model legislation to create new vehicle registration and titling classifications for street rods and custom vehicles and provide for special license plates for these vehicles was approved by the Texas House Transportation Committee. The bill defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured after 1948. The measure also allows replica vehicles to be assigned certificates of title bearing the same model-year designations as the production vehicles they most closely resemble.

FEDERAL UPDATE

Vehicle Scrappage: Congress is finalizing “Cash for Clunkers” legislation that would pay consumers to scrap cars and trucks that get less than 18 miles per gallon in exchange for a cash voucher to buy a new car. This latest effort is the result of negotiations between the Obama administration and the congressional leadership. Under the proposed bill, consumers would receive either $3,500 or $4,500, depending on the fuel-economy improvement of the new vehicle. Lawmakers are attempting to direct new-car sales to automakers and dealerships. SEMA supports the concept of vouchers to help consumers purchase new, fuel-efficient cars but opposes connecting these incentives to vehicle scrappage requirements. SEMA is working with lawmakers to find ways to minimize the harm a motor-vehicle scrappage program will impose on thousands of independent repair shops, auto restorers, customizers and their customers across the country. SEMA will promote instead a government incentive program that will help clean the environment, provide for vehicle and parts recycling and preserve collector cars for future generations.

Roof Crush Rule: The National Highway Traffic Safety Administration strengthened the vehicle roof crush rule, Federal Motor Vehicle Safety Standard No. 216. The new standard will require manufacturers to design roofs that withstand at least three times the weight of a light-duty vehicle (up to 6,000 lbs.) during a two-sided roof strength test. The current standard, which had remained unchanged since 1971, requires the roof to support at least 1.5 times the vehicle weight when tested on one side only. The tests are conducted by pressing a metal plate down on the roof over the driver’s seat, then the passenger’s seat. The NHTSA will continue to rely on static tests rather than include a dynamic test to simulate a vehicle rollover. The requirements will be phased in over a four-year period between 2012 and 2016. The NHTSA estimates that compliance costs will range from $69–$114 per vehicle. The NHTSA responded to SEMA’s concern that the rule accommodates installation of aftermarket sunroofs and other products that interact with the roof.

The NHTSA noted that vehicles with sunroofs had been tested under the new requirements and passed, and that the agency did not foresee any problems with aftermarket installations.

Greenhouse Gases: The U.S. Environmental Protection Agency (EPA) issued a finding that high levels of carbon dioxide (CO2) emissions endanger the health and welfare of current and future generations of Americans. The decision comes nearly two years after the Supreme Court ruled that the EPA had the authority and duty to consider regulating CO2 emissions. The court’s intervention was sought since CO2 is a natural chemical rather than a traditional “pollutant” subject to EPA oversight under the Clean Air Act (CAA). The Obama administration would prefer that lawmakers pass a new law to define the best approach for regulating CO2 emissions rather than using the current CAA for enforcement. House and Senate committees are currently debating the issue, with the goal of enacting a new law this year. Topics under discussion include limiting regulatory oversight to the largest greenhouse gas contributors—power plants and oil refineries, large factories and automobiles—and potentially establishing a cap-and-trade system for CO2 emissions or a carbon tax. Lawmakers will also likely tie auto standards to the Corporate Average Fuel Economy program, since there is a direct relationship between reductions in carbon fuel consumption and CO2 emissions.

Small-Business Credit Relief: The U.S. Small Business Administration (SBA) has temporarily expanded the size requirements for SBA-backed 7(a) loans in order to help insert more liquidity into the marketplace. The SBA estimates that more than 70,000 small businesses across the country will be eligible for new loans between now and the time the program ends on September 30, 2010, including many auto-sector businesses. The temporary-loan size standard will allow businesses to qualify based on net worth and average income (rather than by the number of employees). The company’s net worth cannot exceed $8.5 million, and average net income after federal income taxes for the preceding two completed fiscal years cannot be more than $3 million.

Wed, 07/01/2009 - 14:49

SEMA News - July 2009

Law and Order

 SEMA NEWS-JULY 2009-GOVERMENT AFFAIRS-LAW AND ORDER

Law and Order is an update of some of the most recent federal and state legislative and regulatory issues that could potentially impact the automotive specialty-equipment industry. These include issues affecting small-business owners and their employees.

 


Connecticut

Property Taxes: A SEMA-supported bill has been introduced in the Connecticut State Legislature to provide an exemption from property taxes for antique, rare and special-interest vehicles. The bill is pending in the Joint Transportation Committee for consideration. Connecticut law defines an “antique, rare or special-interest motor vehicle” as a motor vehicle 20 years old or older that is being preserved because of historic interest and that is not altered or modified from the original manufacturer’s specifications.

Montana

Exhaust Noise: Montana legislation that sought to repeal a SEMA-sponsored law enacted in 2007 that permits vehicles with modified exhaust systems that do not emit an excess of 95 decibels died when the legislature adjourned for the year. Under the repeal legislation, Montana would have returned to subjective noise-level determinations when considering whether an exhaust system is legal.

North Carolina

Street Rods/Customs: The North Carolina House Transportation Committee passed a version of SEMA-model legislation to create a vehicle registration classification for street rods, replicas and custom vehicles. The bill is the product of negotiations between SEMA and the hobbyist network in North Carolina and retains the key components of the SEMA-model bill while relieving vehicle owners of unfair title branding and inspection concerns. The bill defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured in or after 1949. The measure also allows replica vehicles to be assigned certificates of title bearing the same model-year designations as the production vehicles intended to be replicated.

Scrappage: SEMA is opposing North Carolina legislation that would implement a state vehicle scrappage program for passenger vehicles that are at least 14 years old. A participant would receive around $1,000–$1,500 to scrap a car and purchase a current-year vehicle under 10,000 lbs. or one from the previous three model years. The participant’s family income must be less than 300% of the current federal poverty level. All trade-in vehicles could be destroyed, regardless of their historical value or collector interest. If this effort is successful, hobbyists could be denied the availability of vintage cars and parts for restoration projects.

Oregon

Aftermarket Parts: The Oregon House Environment and Water Committee approved an alternative to legislation that originally sought to prohibit the sale and distribution of aftermarket motor-vehicle parts if alternatives are available that “decrease greenhouse gas emissions from motor vehicles.” Under the alternative, negotiated between SEMA and the Oregon Department of Environmental Quality, the bill would only give the department authority to adopt the present California certification process for aftermarket emissions-related parts, allowing parts manufacturers to meet one uniform standard rather than a patchwork of multiple state standards. The amended legislation will also incorporate a California law that requires state regulators to develop a tire fuel-efficiency program for passenger-car and light-truck replacement tires. As in California, Oregon will include a SEMA-drafted provision to exempt limited-production tires (15,000 or less annually), deep-tread snow tires, limited-use spares, motorcycle tires and tires manufactured for use on off-road vehicles.

Texas

Street Rods/Customs: SEMA-model legislation to create new vehicle registration and titling classifications for street rods and custom vehicles and provide for special license plates for these vehicles was approved by the Texas House Transportation Committee. The bill defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured after 1948. The measure also allows replica vehicles to be assigned certificates of title bearing the same model-year designations as the production vehicles they most closely resemble.

FEDERAL UPDATE

Vehicle Scrappage: Congress is finalizing “Cash for Clunkers” legislation that would pay consumers to scrap cars and trucks that get less than 18 miles per gallon in exchange for a cash voucher to buy a new car. This latest effort is the result of negotiations between the Obama administration and the congressional leadership. Under the proposed bill, consumers would receive either $3,500 or $4,500, depending on the fuel-economy improvement of the new vehicle. Lawmakers are attempting to direct new-car sales to automakers and dealerships. SEMA supports the concept of vouchers to help consumers purchase new, fuel-efficient cars but opposes connecting these incentives to vehicle scrappage requirements. SEMA is working with lawmakers to find ways to minimize the harm a motor-vehicle scrappage program will impose on thousands of independent repair shops, auto restorers, customizers and their customers across the country. SEMA will promote instead a government incentive program that will help clean the environment, provide for vehicle and parts recycling and preserve collector cars for future generations.

Roof Crush Rule: The National Highway Traffic Safety Administration strengthened the vehicle roof crush rule, Federal Motor Vehicle Safety Standard No. 216. The new standard will require manufacturers to design roofs that withstand at least three times the weight of a light-duty vehicle (up to 6,000 lbs.) during a two-sided roof strength test. The current standard, which had remained unchanged since 1971, requires the roof to support at least 1.5 times the vehicle weight when tested on one side only. The tests are conducted by pressing a metal plate down on the roof over the driver’s seat, then the passenger’s seat. The NHTSA will continue to rely on static tests rather than include a dynamic test to simulate a vehicle rollover. The requirements will be phased in over a four-year period between 2012 and 2016. The NHTSA estimates that compliance costs will range from $69–$114 per vehicle. The NHTSA responded to SEMA’s concern that the rule accommodates installation of aftermarket sunroofs and other products that interact with the roof.

The NHTSA noted that vehicles with sunroofs had been tested under the new requirements and passed, and that the agency did not foresee any problems with aftermarket installations.

Greenhouse Gases: The U.S. Environmental Protection Agency (EPA) issued a finding that high levels of carbon dioxide (CO2) emissions endanger the health and welfare of current and future generations of Americans. The decision comes nearly two years after the Supreme Court ruled that the EPA had the authority and duty to consider regulating CO2 emissions. The court’s intervention was sought since CO2 is a natural chemical rather than a traditional “pollutant” subject to EPA oversight under the Clean Air Act (CAA). The Obama administration would prefer that lawmakers pass a new law to define the best approach for regulating CO2 emissions rather than using the current CAA for enforcement. House and Senate committees are currently debating the issue, with the goal of enacting a new law this year. Topics under discussion include limiting regulatory oversight to the largest greenhouse gas contributors—power plants and oil refineries, large factories and automobiles—and potentially establishing a cap-and-trade system for CO2 emissions or a carbon tax. Lawmakers will also likely tie auto standards to the Corporate Average Fuel Economy program, since there is a direct relationship between reductions in carbon fuel consumption and CO2 emissions.

Small-Business Credit Relief: The U.S. Small Business Administration (SBA) has temporarily expanded the size requirements for SBA-backed 7(a) loans in order to help insert more liquidity into the marketplace. The SBA estimates that more than 70,000 small businesses across the country will be eligible for new loans between now and the time the program ends on September 30, 2010, including many auto-sector businesses. The temporary-loan size standard will allow businesses to qualify based on net worth and average income (rather than by the number of employees). The company’s net worth cannot exceed $8.5 million, and average net income after federal income taxes for the preceding two completed fiscal years cannot be more than $3 million.

Wed, 07/01/2009 - 14:49

SEMA News - July 2009

Law and Order

 SEMA NEWS-JULY 2009-GOVERMENT AFFAIRS-LAW AND ORDER

Law and Order is an update of some of the most recent federal and state legislative and regulatory issues that could potentially impact the automotive specialty-equipment industry. These include issues affecting small-business owners and their employees.

 


Connecticut

Property Taxes: A SEMA-supported bill has been introduced in the Connecticut State Legislature to provide an exemption from property taxes for antique, rare and special-interest vehicles. The bill is pending in the Joint Transportation Committee for consideration. Connecticut law defines an “antique, rare or special-interest motor vehicle” as a motor vehicle 20 years old or older that is being preserved because of historic interest and that is not altered or modified from the original manufacturer’s specifications.

Montana

Exhaust Noise: Montana legislation that sought to repeal a SEMA-sponsored law enacted in 2007 that permits vehicles with modified exhaust systems that do not emit an excess of 95 decibels died when the legislature adjourned for the year. Under the repeal legislation, Montana would have returned to subjective noise-level determinations when considering whether an exhaust system is legal.

North Carolina

Street Rods/Customs: The North Carolina House Transportation Committee passed a version of SEMA-model legislation to create a vehicle registration classification for street rods, replicas and custom vehicles. The bill is the product of negotiations between SEMA and the hobbyist network in North Carolina and retains the key components of the SEMA-model bill while relieving vehicle owners of unfair title branding and inspection concerns. The bill defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured in or after 1949. The measure also allows replica vehicles to be assigned certificates of title bearing the same model-year designations as the production vehicles intended to be replicated.

Scrappage: SEMA is opposing North Carolina legislation that would implement a state vehicle scrappage program for passenger vehicles that are at least 14 years old. A participant would receive around $1,000–$1,500 to scrap a car and purchase a current-year vehicle under 10,000 lbs. or one from the previous three model years. The participant’s family income must be less than 300% of the current federal poverty level. All trade-in vehicles could be destroyed, regardless of their historical value or collector interest. If this effort is successful, hobbyists could be denied the availability of vintage cars and parts for restoration projects.

Oregon

Aftermarket Parts: The Oregon House Environment and Water Committee approved an alternative to legislation that originally sought to prohibit the sale and distribution of aftermarket motor-vehicle parts if alternatives are available that “decrease greenhouse gas emissions from motor vehicles.” Under the alternative, negotiated between SEMA and the Oregon Department of Environmental Quality, the bill would only give the department authority to adopt the present California certification process for aftermarket emissions-related parts, allowing parts manufacturers to meet one uniform standard rather than a patchwork of multiple state standards. The amended legislation will also incorporate a California law that requires state regulators to develop a tire fuel-efficiency program for passenger-car and light-truck replacement tires. As in California, Oregon will include a SEMA-drafted provision to exempt limited-production tires (15,000 or less annually), deep-tread snow tires, limited-use spares, motorcycle tires and tires manufactured for use on off-road vehicles.

Texas

Street Rods/Customs: SEMA-model legislation to create new vehicle registration and titling classifications for street rods and custom vehicles and provide for special license plates for these vehicles was approved by the Texas House Transportation Committee. The bill defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured after 1948. The measure also allows replica vehicles to be assigned certificates of title bearing the same model-year designations as the production vehicles they most closely resemble.

FEDERAL UPDATE

Vehicle Scrappage: Congress is finalizing “Cash for Clunkers” legislation that would pay consumers to scrap cars and trucks that get less than 18 miles per gallon in exchange for a cash voucher to buy a new car. This latest effort is the result of negotiations between the Obama administration and the congressional leadership. Under the proposed bill, consumers would receive either $3,500 or $4,500, depending on the fuel-economy improvement of the new vehicle. Lawmakers are attempting to direct new-car sales to automakers and dealerships. SEMA supports the concept of vouchers to help consumers purchase new, fuel-efficient cars but opposes connecting these incentives to vehicle scrappage requirements. SEMA is working with lawmakers to find ways to minimize the harm a motor-vehicle scrappage program will impose on thousands of independent repair shops, auto restorers, customizers and their customers across the country. SEMA will promote instead a government incentive program that will help clean the environment, provide for vehicle and parts recycling and preserve collector cars for future generations.

Roof Crush Rule: The National Highway Traffic Safety Administration strengthened the vehicle roof crush rule, Federal Motor Vehicle Safety Standard No. 216. The new standard will require manufacturers to design roofs that withstand at least three times the weight of a light-duty vehicle (up to 6,000 lbs.) during a two-sided roof strength test. The current standard, which had remained unchanged since 1971, requires the roof to support at least 1.5 times the vehicle weight when tested on one side only. The tests are conducted by pressing a metal plate down on the roof over the driver’s seat, then the passenger’s seat. The NHTSA will continue to rely on static tests rather than include a dynamic test to simulate a vehicle rollover. The requirements will be phased in over a four-year period between 2012 and 2016. The NHTSA estimates that compliance costs will range from $69–$114 per vehicle. The NHTSA responded to SEMA’s concern that the rule accommodates installation of aftermarket sunroofs and other products that interact with the roof.

The NHTSA noted that vehicles with sunroofs had been tested under the new requirements and passed, and that the agency did not foresee any problems with aftermarket installations.

Greenhouse Gases: The U.S. Environmental Protection Agency (EPA) issued a finding that high levels of carbon dioxide (CO2) emissions endanger the health and welfare of current and future generations of Americans. The decision comes nearly two years after the Supreme Court ruled that the EPA had the authority and duty to consider regulating CO2 emissions. The court’s intervention was sought since CO2 is a natural chemical rather than a traditional “pollutant” subject to EPA oversight under the Clean Air Act (CAA). The Obama administration would prefer that lawmakers pass a new law to define the best approach for regulating CO2 emissions rather than using the current CAA for enforcement. House and Senate committees are currently debating the issue, with the goal of enacting a new law this year. Topics under discussion include limiting regulatory oversight to the largest greenhouse gas contributors—power plants and oil refineries, large factories and automobiles—and potentially establishing a cap-and-trade system for CO2 emissions or a carbon tax. Lawmakers will also likely tie auto standards to the Corporate Average Fuel Economy program, since there is a direct relationship between reductions in carbon fuel consumption and CO2 emissions.

Small-Business Credit Relief: The U.S. Small Business Administration (SBA) has temporarily expanded the size requirements for SBA-backed 7(a) loans in order to help insert more liquidity into the marketplace. The SBA estimates that more than 70,000 small businesses across the country will be eligible for new loans between now and the time the program ends on September 30, 2010, including many auto-sector businesses. The temporary-loan size standard will allow businesses to qualify based on net worth and average income (rather than by the number of employees). The company’s net worth cannot exceed $8.5 million, and average net income after federal income taxes for the preceding two completed fiscal years cannot be more than $3 million.