Fri, 02/27/2009 - 10:25
HTML clipboard

New Online Format Makes Downloads Available to Members

In the specialty-equipment industry, certification often represents a laborious but required undertaking for the selling of aftermarket parts. To ease the process for members, SEMA created and recently revised the Black Book—a guide to achieving emissions compliance status with the California Air Resources Board (CARB) and the U.S. Environmental Protection Agency (EPA).

The Black Book provides information on current federal and state emissions guidelines and was recently revised into an online format, so its contents are now available for download to SEMA members.

“In many cases, there has been confusion about the process by which requirements can be met and Executive Orders (EOs) from CARB issued for applicable parts and systems,” said SEMA Vice President of Government Affairs Steve McDonald. “For years, SEMA has provided information and outlined compliance steps. However, what the revised material has done is further simplify the process.”

The Black Book offers website links to firsthand information from various compliance-related sources, including the CARB website. The handbook also includes simple steps to obtaining a CARB EO, application forms, helpful hints, compliance criteria checklists, retail restrictions information and a list of independent laboratories equipped to perform required emissions-testing protocols.

“Experience has shown that obtainment of a CARB EO typically allows the sale of applicable emissions-related parts and systems outside the state of California,” McDonald stated. “The Black Book also contains information to assist members in understanding and complying with the EPA’s tampering enforcement policy.”

Under the EPA policy, manufacturers must have a “reasonable basis” for concluding that their products do not adversely affect vehicle emissions. McDonald noted that the EPA currently recognizes a CARB EO as meeting the required reasonable basis.

“This collection of valuable information is designed to expedite the certification process for members and to help them identify ways to minimize both cost and time in reaching compliance status,” McDonald said.

For assistance or for help addressing specific concerns, SEMA members are directed to contact SEMA Technical Consultant Jim McFarland at jmcfar1@aol.com.

Fri, 02/27/2009 - 10:25
HTML clipboard

New Online Format Makes Downloads Available to Members

In the specialty-equipment industry, certification often represents a laborious but required undertaking for the selling of aftermarket parts. To ease the process for members, SEMA created and recently revised the Black Book—a guide to achieving emissions compliance status with the California Air Resources Board (CARB) and the U.S. Environmental Protection Agency (EPA).

The Black Book provides information on current federal and state emissions guidelines and was recently revised into an online format, so its contents are now available for download to SEMA members.

“In many cases, there has been confusion about the process by which requirements can be met and Executive Orders (EOs) from CARB issued for applicable parts and systems,” said SEMA Vice President of Government Affairs Steve McDonald. “For years, SEMA has provided information and outlined compliance steps. However, what the revised material has done is further simplify the process.”

The Black Book offers website links to firsthand information from various compliance-related sources, including the CARB website. The handbook also includes simple steps to obtaining a CARB EO, application forms, helpful hints, compliance criteria checklists, retail restrictions information and a list of independent laboratories equipped to perform required emissions-testing protocols.

“Experience has shown that obtainment of a CARB EO typically allows the sale of applicable emissions-related parts and systems outside the state of California,” McDonald stated. “The Black Book also contains information to assist members in understanding and complying with the EPA’s tampering enforcement policy.”

Under the EPA policy, manufacturers must have a “reasonable basis” for concluding that their products do not adversely affect vehicle emissions. McDonald noted that the EPA currently recognizes a CARB EO as meeting the required reasonable basis.

“This collection of valuable information is designed to expedite the certification process for members and to help them identify ways to minimize both cost and time in reaching compliance status,” McDonald said.

For assistance or for help addressing specific concerns, SEMA members are directed to contact SEMA Technical Consultant Jim McFarland at jmcfar1@aol.com.

Fri, 02/27/2009 - 10:25
HTML clipboard

New Online Format Makes Downloads Available to Members

In the specialty-equipment industry, certification often represents a laborious but required undertaking for the selling of aftermarket parts. To ease the process for members, SEMA created and recently revised the Black Book—a guide to achieving emissions compliance status with the California Air Resources Board (CARB) and the U.S. Environmental Protection Agency (EPA).

The Black Book provides information on current federal and state emissions guidelines and was recently revised into an online format, so its contents are now available for download to SEMA members.

“In many cases, there has been confusion about the process by which requirements can be met and Executive Orders (EOs) from CARB issued for applicable parts and systems,” said SEMA Vice President of Government Affairs Steve McDonald. “For years, SEMA has provided information and outlined compliance steps. However, what the revised material has done is further simplify the process.”

The Black Book offers website links to firsthand information from various compliance-related sources, including the CARB website. The handbook also includes simple steps to obtaining a CARB EO, application forms, helpful hints, compliance criteria checklists, retail restrictions information and a list of independent laboratories equipped to perform required emissions-testing protocols.

“Experience has shown that obtainment of a CARB EO typically allows the sale of applicable emissions-related parts and systems outside the state of California,” McDonald stated. “The Black Book also contains information to assist members in understanding and complying with the EPA’s tampering enforcement policy.”

Under the EPA policy, manufacturers must have a “reasonable basis” for concluding that their products do not adversely affect vehicle emissions. McDonald noted that the EPA currently recognizes a CARB EO as meeting the required reasonable basis.

“This collection of valuable information is designed to expedite the certification process for members and to help them identify ways to minimize both cost and time in reaching compliance status,” McDonald said.

For assistance or for help addressing specific concerns, SEMA members are directed to contact SEMA Technical Consultant Jim McFarland at jmcfar1@aol.com.

Fri, 02/27/2009 - 10:25
HTML clipboard

New Online Format Makes Downloads Available to Members

In the specialty-equipment industry, certification often represents a laborious but required undertaking for the selling of aftermarket parts. To ease the process for members, SEMA created and recently revised the Black Book—a guide to achieving emissions compliance status with the California Air Resources Board (CARB) and the U.S. Environmental Protection Agency (EPA).

The Black Book provides information on current federal and state emissions guidelines and was recently revised into an online format, so its contents are now available for download to SEMA members.

“In many cases, there has been confusion about the process by which requirements can be met and Executive Orders (EOs) from CARB issued for applicable parts and systems,” said SEMA Vice President of Government Affairs Steve McDonald. “For years, SEMA has provided information and outlined compliance steps. However, what the revised material has done is further simplify the process.”

The Black Book offers website links to firsthand information from various compliance-related sources, including the CARB website. The handbook also includes simple steps to obtaining a CARB EO, application forms, helpful hints, compliance criteria checklists, retail restrictions information and a list of independent laboratories equipped to perform required emissions-testing protocols.

“Experience has shown that obtainment of a CARB EO typically allows the sale of applicable emissions-related parts and systems outside the state of California,” McDonald stated. “The Black Book also contains information to assist members in understanding and complying with the EPA’s tampering enforcement policy.”

Under the EPA policy, manufacturers must have a “reasonable basis” for concluding that their products do not adversely affect vehicle emissions. McDonald noted that the EPA currently recognizes a CARB EO as meeting the required reasonable basis.

“This collection of valuable information is designed to expedite the certification process for members and to help them identify ways to minimize both cost and time in reaching compliance status,” McDonald said.

For assistance or for help addressing specific concerns, SEMA members are directed to contact SEMA Technical Consultant Jim McFarland at jmcfar1@aol.com.

Thu, 02/26/2009 - 00:00

Effective and efficient marketing has become more important than ever, and with exclusive access to purchase SEMA’s mailing labels and reports, members are able to benefit from a valuable, time-saving resource.

The mailing labels include the names and addresses of SEMA’s more than 7,000 member companies. Members can choose from 26 different categories, including car dealer, importer, installer/restyler, jobber, manufacturer, manufacturers' representative, retailer and warehouse/multiline distributor. Members can select one or all categories for a flat fee.

Members may also request a printed report along with their mailing labels. The report will reflect the same contact information provided by the mailing labels.

“Direct mail is still a very viable marketing channel," said Dan Hobgood, SEMA senior director of marketing. "Having access to key member companies is extremely valuable and should not be overlooked."

For more information on ordering mailing lists and labels, contact the SEMA Membership Department at member@sema.org or call 909/396-0289.

To learn more about the many SEMA-member benefits, visit http://www.sema.org/sema-membership-benefits.

Thu, 02/26/2009 - 00:00


With Crane Cams shuttering operations, products like its legendary cams and these roller rocker arms for Chevy V8s (shown above) may be history.

The Daytona Beach News-Journal is reporting that Crane Cams, the 56-year-old performance parts manufacturer, has closed its doors and laid off its employees.

SEMA's midday calls to Crane's Daytona Beach headquarters received an automated message stating that the offices were closed after-hours. Calls to Mikronite Technologies, Crane's parent company in New Jersey, yielded the same message.

The News-Journal quoted a Crane employee as saying the company had told workers during the past week that layoffs were likely. Crane had gone through a series of small layoffs recently, he added. A handful of comments on the News-Journal's webpage hosting the story, purportedly from Crane employees, speculated that the company was still in a buyout transition.

Sources at magazine publisher Source Interlink Media—venues for Crane's advertising—however, confirmed their information that the company had closed.

Crane Engineering was founded by Harvey J. Crane Jr. in 1953. Mikronite, an industrial technology firm, bought Crane in 2006.

Crane Jr. was elected to the SEMA Hall of Fame in 1981.

Thu, 02/26/2009 - 00:00


Tom Hecklinski, seen here with SEMA's Ellen McKoy, was instrumental in founding the Professional Restylers Organization (PRO) and played a key role in the council’s transition into SEMA. 

Tom Hecklinski, president and founder of Razzi Ground Effects, died on Thursday, February 19, after suffering a heart attack.

Soon after founding Razzi in 1984,  Hecklinski became active in SEMA and was instrumental in founding the Professional Restylers Organization (PRO) as an independent association and later played a key role in PRO's transition as a SEMA council. 

As a charter member of PRO, Tom served numerous terms on the council’s Select Committee and was the driving force behind the creation of the council's voluntary code of ethics for member manufacturers. In recognition of his numerous contributions to the restyling industry, Hecklinski was honored with the PRO/Jim Borré Lifetime Achievement Award in 2005.

"Tom was more than a colleague; he was a dear friend for nearly 25 years," said Ellen McKoy, SEMA senior director of dealer relations. "He was a man of integrity with an unbridled passion for the industry and his loss will be felt by many whose lives he touched."

Thu, 02/26/2009 - 00:00

To help installers earn their credentials as SEMA-certified accessory specialists, SEMA and Webasto Product North America have teamed up to host an ASE A6 training workshop on Saturday, March 28. The hands-on workshop launches at the headquarters of Auto Trim of Denver.

Prepare for the A6 exam in an interactive setting where you can ask questions and get the answers you need on the spot. Key focal points include electrical systems, diagnosis and repair, gauges, battery testing, circuits and circuit testing and more.

Cost to attend is $40 per person and includes continental breakfast, lunch and training manual. Pre-registration is required; registration deadline is Friday, March 13. To download the registration form, click here.

For questions or additional information, e-mail Beverly Rosen at beverlyr@sema.org.

Thu, 02/26/2009 - 00:00

Filler for eNews

Thu, 02/26/2009 - 00:00

Learn the skills you need to build long-lasting, successful relationships within your supply chain with upcoming webinar, “Relationship Management Within the Supply Chain: Get the Most From Your Suppliers, Company and Teams.”

Nancy McGuire, founder of the McGuire Consulting Group, will address how to manage relationships within the supply-chain organization, including negotiating with suppliers, competing internally for investment dollars on projects or leading a team.

When: Thursday, March 5, 10:00 a.m.–11:00 a.m. (PST)
Presenter: Nancy McGuire, Founder, McGuire Consulting Group

This session is part of the 2009 SEMA Recession Survival Series, a collection of online workshops to help member businesses survive the current economic crisis. The new program focuses on topics specific to today’s challenges, including managing cash flow, retaining the best employees, managing inventory and leading your company through 2009 into the new business environment.

To register for this or other upcoming sessions in the 2009 SEMA Recession Survival Series, click here.

SEMA's Webinar Program: The SEMA webinar program brings the world-class business seminars featured during the SEMA Show right to your desktop. Different business-building sessions are constantly added to the program, offering members the latest insight and practices from today’s leading speakers.

All SEMA webinars are conducted live and are open to all employees of SEMA-member companies free of charge. To participate, all you need is a computer with Internet access and a telephone. All previous SEMA webinars are available for download by clicking here. To view upcoming presentations that you can attend via telephone and Internet, click here.