By Carr Winn

This year’s SEMA Show included a specially designed, purpose-built headquarters for the tire industry. A show within a show, the Global Tire Expo—Powered by Tire Industry Association (TIA) was created to focus attention on tire-industry innovations and opportunities. Judging by the positive reactions of all involved, the Expo concept turned out to be a great idea.

In fact, the inaugural Global Tire Expo captured media attention long before the first attendee walked into the Las Vegas Convention Center. Leading up to the Show, magazine and newspaper headlines created high expectations, announcing the premiere of a tire-industry-only part of the traditional SEMA Show.

The new area was opened up to exhibitors from all sectors of the tire industry—from automotive, to commercial, OTR, retreading, recycling and more.

“By working with TIA, we created the to meet the needs of the tire industry,” said Chris Kersting, SEMA president and CEO. Branding a special section of the Convention Center as dedicated exclusively to the tire industry was also a tremendous opportunity for buyers. Kersting pointed out that many buyers at the SEMA Show were looking to expand their product lines to include tire-related products. By introducing performance industry buyers to tire industry exhibitors, the setting within SEMA creates new customers and new opportunities for both groups.

For both exhibitors and buyers, the 2010 Global Tire Expo more than delivered, even when examining only the initial statistics. Show management indicated that tire- and wheel-related new-product submissions for the New Products Showcase were up 14%. In addition to product premieres, the number of wheel- and tire-industry exhibitors was up more than 11%, representing a total of 197 companies in the Global Tire Expo, including 39 first-time SEMA Show exhibitors.

	Advertisement

TIA’s Executive Vice President Roy Littlefield clearly recognized the potential for success with the inaugural Global Tire Expo. Littlefield was extremely optimistic in an interview with Tire Review magazine. “The strong exhibitor presence is proof positive that TIA’s and SEMA’s efforts are reaping positive results,” he said. “We appreciate the support these manufacturers are showing and are especially pleased to know that the new Expo is resonating with them.”

In addition to the number of exhibitors and new products, the Global Tire Expo also included expanded educational sessions targeted to the tire market. The tracks included TPMS at 10, Tires at 2, Truck Tires at 10 and Management at 4. Littlefield explained that the substantial educational offerings further reinforced that the 2010 Expo was a must-attend event.

“The educational sessions offered at the Expo provide tire-industry attendees with the best of both worlds. They can get up-to-the-minute, relevant, entertaining information from some of the world’s leading experts in the tire industry and still have enough time to make important business contacts and meet plenty of potential suppliers,” Littlefield said.

In SEMA Show Daily, the trade newspaper distributed prior to the SEMA Show as well as on site at the Las Vegas Convention Center, Tire Review magazine hosted a section dedicated to the new Global Tire Expo—Powered by TIA. The headline in Issue 1 spoke volumes: “Tire Pros Flocking to First-Ever Global Tire Expo.” Capping that endorsement, the story opened with a powerful statement about the new endeavor. “It’s been a long time coming, but the North American tire industry finally has a Show of its own.”

While the 2011 Show is almost a year away, it’s clear that momentum is already building. For more information on exhibiting at the 2011 SEMA Show/Global Tire Expo, visit www.SEMAShow.com/buyabooth.

By Carr Winn

This year’s SEMA Show included a specially designed, purpose-built headquarters for the tire industry. A show within a show, the Global Tire Expo—Powered by Tire Industry Association (TIA) was created to focus attention on tire-industry innovations and opportunities. Judging by the positive reactions of all involved, the Expo concept turned out to be a great idea.

In fact, the inaugural Global Tire Expo captured media attention long before the first attendee walked into the Las Vegas Convention Center. Leading up to the Show, magazine and newspaper headlines created high expectations, announcing the premiere of a tire-industry-only part of the traditional SEMA Show.

The new area was opened up to exhibitors from all sectors of the tire industry—from automotive, to commercial, OTR, retreading, recycling and more.

“By working with TIA, we created the to meet the needs of the tire industry,” said Chris Kersting, SEMA president and CEO. Branding a special section of the Convention Center as dedicated exclusively to the tire industry was also a tremendous opportunity for buyers. Kersting pointed out that many buyers at the SEMA Show were looking to expand their product lines to include tire-related products. By introducing performance industry buyers to tire industry exhibitors, the setting within SEMA creates new customers and new opportunities for both groups.

For both exhibitors and buyers, the 2010 Global Tire Expo more than delivered, even when examining only the initial statistics. Show management indicated that tire- and wheel-related new-product submissions for the New Products Showcase were up 14%. In addition to product premieres, the number of wheel- and tire-industry exhibitors was up more than 11%, representing a total of 197 companies in the Global Tire Expo, including 39 first-time SEMA Show exhibitors.

	Advertisement

TIA’s Executive Vice President Roy Littlefield clearly recognized the potential for success with the inaugural Global Tire Expo. Littlefield was extremely optimistic in an interview with Tire Review magazine. “The strong exhibitor presence is proof positive that TIA’s and SEMA’s efforts are reaping positive results,” he said. “We appreciate the support these manufacturers are showing and are especially pleased to know that the new Expo is resonating with them.”

In addition to the number of exhibitors and new products, the Global Tire Expo also included expanded educational sessions targeted to the tire market. The tracks included TPMS at 10, Tires at 2, Truck Tires at 10 and Management at 4. Littlefield explained that the substantial educational offerings further reinforced that the 2010 Expo was a must-attend event.

“The educational sessions offered at the Expo provide tire-industry attendees with the best of both worlds. They can get up-to-the-minute, relevant, entertaining information from some of the world’s leading experts in the tire industry and still have enough time to make important business contacts and meet plenty of potential suppliers,” Littlefield said.

In SEMA Show Daily, the trade newspaper distributed prior to the SEMA Show as well as on site at the Las Vegas Convention Center, Tire Review magazine hosted a section dedicated to the new Global Tire Expo—Powered by TIA. The headline in Issue 1 spoke volumes: “Tire Pros Flocking to First-Ever Global Tire Expo.” Capping that endorsement, the story opened with a powerful statement about the new endeavor. “It’s been a long time coming, but the North American tire industry finally has a Show of its own.”

While the 2011 Show is almost a year away, it’s clear that momentum is already building. For more information on exhibiting at the 2011 SEMA Show/Global Tire Expo, visit www.SEMAShow.com/buyabooth.

By Carr Winn

This year’s SEMA Show included a specially designed, purpose-built headquarters for the tire industry. A show within a show, the Global Tire Expo—Powered by Tire Industry Association (TIA) was created to focus attention on tire-industry innovations and opportunities. Judging by the positive reactions of all involved, the Expo concept turned out to be a great idea.

In fact, the inaugural Global Tire Expo captured media attention long before the first attendee walked into the Las Vegas Convention Center. Leading up to the Show, magazine and newspaper headlines created high expectations, announcing the premiere of a tire-industry-only part of the traditional SEMA Show.

The new area was opened up to exhibitors from all sectors of the tire industry—from automotive, to commercial, OTR, retreading, recycling and more.

“By working with TIA, we created the to meet the needs of the tire industry,” said Chris Kersting, SEMA president and CEO. Branding a special section of the Convention Center as dedicated exclusively to the tire industry was also a tremendous opportunity for buyers. Kersting pointed out that many buyers at the SEMA Show were looking to expand their product lines to include tire-related products. By introducing performance industry buyers to tire industry exhibitors, the setting within SEMA creates new customers and new opportunities for both groups.

For both exhibitors and buyers, the 2010 Global Tire Expo more than delivered, even when examining only the initial statistics. Show management indicated that tire- and wheel-related new-product submissions for the New Products Showcase were up 14%. In addition to product premieres, the number of wheel- and tire-industry exhibitors was up more than 11%, representing a total of 197 companies in the Global Tire Expo, including 39 first-time SEMA Show exhibitors.

	Advertisement

TIA’s Executive Vice President Roy Littlefield clearly recognized the potential for success with the inaugural Global Tire Expo. Littlefield was extremely optimistic in an interview with Tire Review magazine. “The strong exhibitor presence is proof positive that TIA’s and SEMA’s efforts are reaping positive results,” he said. “We appreciate the support these manufacturers are showing and are especially pleased to know that the new Expo is resonating with them.”

In addition to the number of exhibitors and new products, the Global Tire Expo also included expanded educational sessions targeted to the tire market. The tracks included TPMS at 10, Tires at 2, Truck Tires at 10 and Management at 4. Littlefield explained that the substantial educational offerings further reinforced that the 2010 Expo was a must-attend event.

“The educational sessions offered at the Expo provide tire-industry attendees with the best of both worlds. They can get up-to-the-minute, relevant, entertaining information from some of the world’s leading experts in the tire industry and still have enough time to make important business contacts and meet plenty of potential suppliers,” Littlefield said.

In SEMA Show Daily, the trade newspaper distributed prior to the SEMA Show as well as on site at the Las Vegas Convention Center, Tire Review magazine hosted a section dedicated to the new Global Tire Expo—Powered by TIA. The headline in Issue 1 spoke volumes: “Tire Pros Flocking to First-Ever Global Tire Expo.” Capping that endorsement, the story opened with a powerful statement about the new endeavor. “It’s been a long time coming, but the North American tire industry finally has a Show of its own.”

While the 2011 Show is almost a year away, it’s clear that momentum is already building. For more information on exhibiting at the 2011 SEMA Show/Global Tire Expo, visit www.SEMAShow.com/buyabooth.

By Carr Winn

This year’s SEMA Show included a specially designed, purpose-built headquarters for the tire industry. A show within a show, the Global Tire Expo—Powered by Tire Industry Association (TIA) was created to focus attention on tire-industry innovations and opportunities. Judging by the positive reactions of all involved, the Expo concept turned out to be a great idea.

In fact, the inaugural Global Tire Expo captured media attention long before the first attendee walked into the Las Vegas Convention Center. Leading up to the Show, magazine and newspaper headlines created high expectations, announcing the premiere of a tire-industry-only part of the traditional SEMA Show.

The new area was opened up to exhibitors from all sectors of the tire industry—from automotive, to commercial, OTR, retreading, recycling and more.

“By working with TIA, we created the to meet the needs of the tire industry,” said Chris Kersting, SEMA president and CEO. Branding a special section of the Convention Center as dedicated exclusively to the tire industry was also a tremendous opportunity for buyers. Kersting pointed out that many buyers at the SEMA Show were looking to expand their product lines to include tire-related products. By introducing performance industry buyers to tire industry exhibitors, the setting within SEMA creates new customers and new opportunities for both groups.

For both exhibitors and buyers, the 2010 Global Tire Expo more than delivered, even when examining only the initial statistics. Show management indicated that tire- and wheel-related new-product submissions for the New Products Showcase were up 14%. In addition to product premieres, the number of wheel- and tire-industry exhibitors was up more than 11%, representing a total of 197 companies in the Global Tire Expo, including 39 first-time SEMA Show exhibitors.

	Advertisement

TIA’s Executive Vice President Roy Littlefield clearly recognized the potential for success with the inaugural Global Tire Expo. Littlefield was extremely optimistic in an interview with Tire Review magazine. “The strong exhibitor presence is proof positive that TIA’s and SEMA’s efforts are reaping positive results,” he said. “We appreciate the support these manufacturers are showing and are especially pleased to know that the new Expo is resonating with them.”

In addition to the number of exhibitors and new products, the Global Tire Expo also included expanded educational sessions targeted to the tire market. The tracks included TPMS at 10, Tires at 2, Truck Tires at 10 and Management at 4. Littlefield explained that the substantial educational offerings further reinforced that the 2010 Expo was a must-attend event.

“The educational sessions offered at the Expo provide tire-industry attendees with the best of both worlds. They can get up-to-the-minute, relevant, entertaining information from some of the world’s leading experts in the tire industry and still have enough time to make important business contacts and meet plenty of potential suppliers,” Littlefield said.

In SEMA Show Daily, the trade newspaper distributed prior to the SEMA Show as well as on site at the Las Vegas Convention Center, Tire Review magazine hosted a section dedicated to the new Global Tire Expo—Powered by TIA. The headline in Issue 1 spoke volumes: “Tire Pros Flocking to First-Ever Global Tire Expo.” Capping that endorsement, the story opened with a powerful statement about the new endeavor. “It’s been a long time coming, but the North American tire industry finally has a Show of its own.”

While the 2011 Show is almost a year away, it’s clear that momentum is already building. For more information on exhibiting at the 2011 SEMA Show/Global Tire Expo, visit www.SEMAShow.com/buyabooth.

By Carr Winn

This year’s SEMA Show included a specially designed, purpose-built headquarters for the tire industry. A show within a show, the Global Tire Expo—Powered by Tire Industry Association (TIA) was created to focus attention on tire-industry innovations and opportunities. Judging by the positive reactions of all involved, the Expo concept turned out to be a great idea.

In fact, the inaugural Global Tire Expo captured media attention long before the first attendee walked into the Las Vegas Convention Center. Leading up to the Show, magazine and newspaper headlines created high expectations, announcing the premiere of a tire-industry-only part of the traditional SEMA Show.

The new area was opened up to exhibitors from all sectors of the tire industry—from automotive, to commercial, OTR, retreading, recycling and more.

“By working with TIA, we created the to meet the needs of the tire industry,” said Chris Kersting, SEMA president and CEO. Branding a special section of the Convention Center as dedicated exclusively to the tire industry was also a tremendous opportunity for buyers. Kersting pointed out that many buyers at the SEMA Show were looking to expand their product lines to include tire-related products. By introducing performance industry buyers to tire industry exhibitors, the setting within SEMA creates new customers and new opportunities for both groups.

For both exhibitors and buyers, the 2010 Global Tire Expo more than delivered, even when examining only the initial statistics. Show management indicated that tire- and wheel-related new-product submissions for the New Products Showcase were up 14%. In addition to product premieres, the number of wheel- and tire-industry exhibitors was up more than 11%, representing a total of 197 companies in the Global Tire Expo, including 39 first-time SEMA Show exhibitors.

	Advertisement

TIA’s Executive Vice President Roy Littlefield clearly recognized the potential for success with the inaugural Global Tire Expo. Littlefield was extremely optimistic in an interview with Tire Review magazine. “The strong exhibitor presence is proof positive that TIA’s and SEMA’s efforts are reaping positive results,” he said. “We appreciate the support these manufacturers are showing and are especially pleased to know that the new Expo is resonating with them.”

In addition to the number of exhibitors and new products, the Global Tire Expo also included expanded educational sessions targeted to the tire market. The tracks included TPMS at 10, Tires at 2, Truck Tires at 10 and Management at 4. Littlefield explained that the substantial educational offerings further reinforced that the 2010 Expo was a must-attend event.

“The educational sessions offered at the Expo provide tire-industry attendees with the best of both worlds. They can get up-to-the-minute, relevant, entertaining information from some of the world’s leading experts in the tire industry and still have enough time to make important business contacts and meet plenty of potential suppliers,” Littlefield said.

In SEMA Show Daily, the trade newspaper distributed prior to the SEMA Show as well as on site at the Las Vegas Convention Center, Tire Review magazine hosted a section dedicated to the new Global Tire Expo—Powered by TIA. The headline in Issue 1 spoke volumes: “Tire Pros Flocking to First-Ever Global Tire Expo.” Capping that endorsement, the story opened with a powerful statement about the new endeavor. “It’s been a long time coming, but the North American tire industry finally has a Show of its own.”

While the 2011 Show is almost a year away, it’s clear that momentum is already building. For more information on exhibiting at the 2011 SEMA Show/Global Tire Expo, visit www.SEMAShow.com/buyabooth.

By Carr Winn

This year’s SEMA Show included a specially designed, purpose-built headquarters for the tire industry. A show within a show, the Global Tire Expo—Powered by Tire Industry Association (TIA) was created to focus attention on tire-industry innovations and opportunities. Judging by the positive reactions of all involved, the Expo concept turned out to be a great idea.

In fact, the inaugural Global Tire Expo captured media attention long before the first attendee walked into the Las Vegas Convention Center. Leading up to the Show, magazine and newspaper headlines created high expectations, announcing the premiere of a tire-industry-only part of the traditional SEMA Show.

The new area was opened up to exhibitors from all sectors of the tire industry—from automotive, to commercial, OTR, retreading, recycling and more.

“By working with TIA, we created the to meet the needs of the tire industry,” said Chris Kersting, SEMA president and CEO. Branding a special section of the Convention Center as dedicated exclusively to the tire industry was also a tremendous opportunity for buyers. Kersting pointed out that many buyers at the SEMA Show were looking to expand their product lines to include tire-related products. By introducing performance industry buyers to tire industry exhibitors, the setting within SEMA creates new customers and new opportunities for both groups.

For both exhibitors and buyers, the 2010 Global Tire Expo more than delivered, even when examining only the initial statistics. Show management indicated that tire- and wheel-related new-product submissions for the New Products Showcase were up 14%. In addition to product premieres, the number of wheel- and tire-industry exhibitors was up more than 11%, representing a total of 197 companies in the Global Tire Expo, including 39 first-time SEMA Show exhibitors.

	Advertisement

TIA’s Executive Vice President Roy Littlefield clearly recognized the potential for success with the inaugural Global Tire Expo. Littlefield was extremely optimistic in an interview with Tire Review magazine. “The strong exhibitor presence is proof positive that TIA’s and SEMA’s efforts are reaping positive results,” he said. “We appreciate the support these manufacturers are showing and are especially pleased to know that the new Expo is resonating with them.”

In addition to the number of exhibitors and new products, the Global Tire Expo also included expanded educational sessions targeted to the tire market. The tracks included TPMS at 10, Tires at 2, Truck Tires at 10 and Management at 4. Littlefield explained that the substantial educational offerings further reinforced that the 2010 Expo was a must-attend event.

“The educational sessions offered at the Expo provide tire-industry attendees with the best of both worlds. They can get up-to-the-minute, relevant, entertaining information from some of the world’s leading experts in the tire industry and still have enough time to make important business contacts and meet plenty of potential suppliers,” Littlefield said.

In SEMA Show Daily, the trade newspaper distributed prior to the SEMA Show as well as on site at the Las Vegas Convention Center, Tire Review magazine hosted a section dedicated to the new Global Tire Expo—Powered by TIA. The headline in Issue 1 spoke volumes: “Tire Pros Flocking to First-Ever Global Tire Expo.” Capping that endorsement, the story opened with a powerful statement about the new endeavor. “It’s been a long time coming, but the North American tire industry finally has a Show of its own.”

While the 2011 Show is almost a year away, it’s clear that momentum is already building. For more information on exhibiting at the 2011 SEMA Show/Global Tire Expo, visit www.SEMAShow.com/buyabooth.

By Carr Winn

This year’s SEMA Show included a specially designed, purpose-built headquarters for the tire industry. A show within a show, the Global Tire Expo—Powered by Tire Industry Association (TIA) was created to focus attention on tire-industry innovations and opportunities. Judging by the positive reactions of all involved, the Expo concept turned out to be a great idea.

In fact, the inaugural Global Tire Expo captured media attention long before the first attendee walked into the Las Vegas Convention Center. Leading up to the Show, magazine and newspaper headlines created high expectations, announcing the premiere of a tire-industry-only part of the traditional SEMA Show.

The new area was opened up to exhibitors from all sectors of the tire industry—from automotive, to commercial, OTR, retreading, recycling and more.

“By working with TIA, we created the to meet the needs of the tire industry,” said Chris Kersting, SEMA president and CEO. Branding a special section of the Convention Center as dedicated exclusively to the tire industry was also a tremendous opportunity for buyers. Kersting pointed out that many buyers at the SEMA Show were looking to expand their product lines to include tire-related products. By introducing performance industry buyers to tire industry exhibitors, the setting within SEMA creates new customers and new opportunities for both groups.

For both exhibitors and buyers, the 2010 Global Tire Expo more than delivered, even when examining only the initial statistics. Show management indicated that tire- and wheel-related new-product submissions for the New Products Showcase were up 14%. In addition to product premieres, the number of wheel- and tire-industry exhibitors was up more than 11%, representing a total of 197 companies in the Global Tire Expo, including 39 first-time SEMA Show exhibitors.

	Advertisement

TIA’s Executive Vice President Roy Littlefield clearly recognized the potential for success with the inaugural Global Tire Expo. Littlefield was extremely optimistic in an interview with Tire Review magazine. “The strong exhibitor presence is proof positive that TIA’s and SEMA’s efforts are reaping positive results,” he said. “We appreciate the support these manufacturers are showing and are especially pleased to know that the new Expo is resonating with them.”

In addition to the number of exhibitors and new products, the Global Tire Expo also included expanded educational sessions targeted to the tire market. The tracks included TPMS at 10, Tires at 2, Truck Tires at 10 and Management at 4. Littlefield explained that the substantial educational offerings further reinforced that the 2010 Expo was a must-attend event.

“The educational sessions offered at the Expo provide tire-industry attendees with the best of both worlds. They can get up-to-the-minute, relevant, entertaining information from some of the world’s leading experts in the tire industry and still have enough time to make important business contacts and meet plenty of potential suppliers,” Littlefield said.

In SEMA Show Daily, the trade newspaper distributed prior to the SEMA Show as well as on site at the Las Vegas Convention Center, Tire Review magazine hosted a section dedicated to the new Global Tire Expo—Powered by TIA. The headline in Issue 1 spoke volumes: “Tire Pros Flocking to First-Ever Global Tire Expo.” Capping that endorsement, the story opened with a powerful statement about the new endeavor. “It’s been a long time coming, but the North American tire industry finally has a Show of its own.”

While the 2011 Show is almost a year away, it’s clear that momentum is already building. For more information on exhibiting at the 2011 SEMA Show/Global Tire Expo, visit www.SEMAShow.com/buyabooth.

By Carr Winn

This year’s SEMA Show included a specially designed, purpose-built headquarters for the tire industry. A show within a show, the Global Tire Expo—Powered by Tire Industry Association (TIA) was created to focus attention on tire-industry innovations and opportunities. Judging by the positive reactions of all involved, the Expo concept turned out to be a great idea.

In fact, the inaugural Global Tire Expo captured media attention long before the first attendee walked into the Las Vegas Convention Center. Leading up to the Show, magazine and newspaper headlines created high expectations, announcing the premiere of a tire-industry-only part of the traditional SEMA Show.

The new area was opened up to exhibitors from all sectors of the tire industry—from automotive, to commercial, OTR, retreading, recycling and more.

“By working with TIA, we created the to meet the needs of the tire industry,” said Chris Kersting, SEMA president and CEO. Branding a special section of the Convention Center as dedicated exclusively to the tire industry was also a tremendous opportunity for buyers. Kersting pointed out that many buyers at the SEMA Show were looking to expand their product lines to include tire-related products. By introducing performance industry buyers to tire industry exhibitors, the setting within SEMA creates new customers and new opportunities for both groups.

For both exhibitors and buyers, the 2010 Global Tire Expo more than delivered, even when examining only the initial statistics. Show management indicated that tire- and wheel-related new-product submissions for the New Products Showcase were up 14%. In addition to product premieres, the number of wheel- and tire-industry exhibitors was up more than 11%, representing a total of 197 companies in the Global Tire Expo, including 39 first-time SEMA Show exhibitors.

	Advertisement

TIA’s Executive Vice President Roy Littlefield clearly recognized the potential for success with the inaugural Global Tire Expo. Littlefield was extremely optimistic in an interview with Tire Review magazine. “The strong exhibitor presence is proof positive that TIA’s and SEMA’s efforts are reaping positive results,” he said. “We appreciate the support these manufacturers are showing and are especially pleased to know that the new Expo is resonating with them.”

In addition to the number of exhibitors and new products, the Global Tire Expo also included expanded educational sessions targeted to the tire market. The tracks included TPMS at 10, Tires at 2, Truck Tires at 10 and Management at 4. Littlefield explained that the substantial educational offerings further reinforced that the 2010 Expo was a must-attend event.

“The educational sessions offered at the Expo provide tire-industry attendees with the best of both worlds. They can get up-to-the-minute, relevant, entertaining information from some of the world’s leading experts in the tire industry and still have enough time to make important business contacts and meet plenty of potential suppliers,” Littlefield said.

In SEMA Show Daily, the trade newspaper distributed prior to the SEMA Show as well as on site at the Las Vegas Convention Center, Tire Review magazine hosted a section dedicated to the new Global Tire Expo—Powered by TIA. The headline in Issue 1 spoke volumes: “Tire Pros Flocking to First-Ever Global Tire Expo.” Capping that endorsement, the story opened with a powerful statement about the new endeavor. “It’s been a long time coming, but the North American tire industry finally has a Show of its own.”

While the 2011 Show is almost a year away, it’s clear that momentum is already building. For more information on exhibiting at the 2011 SEMA Show/Global Tire Expo, visit www.SEMAShow.com/buyabooth.

Those SEMA News readers who have been around the block once or twice may recall the early days of the hot-rod scene and how it progressed from the street to the strip, spawning countless businesses and institutions.

One relic of those days is the work of Pete Millar, who celebrated and satirized the lifestyle, the people and the institutions of the day in magazines such as Rod & Custom, Hot Rod, Car Craft, CARtoons and his own magazine, Drag Cartoons. By the time this strip was originally published in June of 1963, Millar was making the point that street racing was out and safety was important for all enthusiasts. It’s a message that resonates to this day.

Nostalgia for simpler days remains strong within the racing and performance segment, underlined by new products intended for earlier engines and vintage platforms. Along with those, as you’ll see in the coming pages, are new products reflecting the future of the segment. (For a digital version of each entry, point your Internet browser to www.semadigital.com and simply search for a product by company name, part description or application.)

SEMA is an institution that the racing and performance industry helped create, so it’s no surprise that for many who attended the 2010 SEMA Show, racing and performance parts are the main attraction.

This year, 479 Racing & Performance exhibitors filled Central Hall, and buyers swarmed over the area. Half of all active buyers at the Show (52%) spent at least part of their week in this section of the Las Vegas Convention Center. Measured in scans of attendee badges, buyers opened up dialogue on the Show floor with racing and performance exhibitors a total of 60,805 times.

Four out of five buyers (74%), also made a visit to the New Products Showcase, where predictably, racing and performance manufacturers made a strong showing in terms of new-product launches. Their entries were scanned 8,835 times by attending media and buyers using handheld remote scanners.

Along with the products shown here, we’ve interviewed industry executives to get their thoughts about the trends they perceive and, perhaps, some words of advice about what might lie ahead. You’ll see their comments and predictions as you page through the story.

Adaptronic Engine Management Select Mazda RX8 Plug-In ECU +612-9899-9594 www.adaptronicecu.com PN: Select RX8 Plug-in piggyback ECU for Mazda RX8 Series 1. Full control over ignition, fuel and intake. Works on a MAP sensor or standard airflow sensor.		Adaptronic Engine Management Select Nissan S15 Plug-In ECU +612-9899-9594 www.adaptronicecu.com PN: Select S15 Standalone plug-in ECU for Nissan S15 SR20DET (240SX/Silvia/200SX). Full control of fuel, ignition, idle, boost, aircon, thermofan and VVT.		ADDCO Manufacturing Inc. Maintenance-Free Urethane Midsection Sway Bar Bushings 800/621-8916 www.addco.net PN: 614W Maintenance-free urethane sway bar midsection bushing.
ADDCO Manufacturing Inc. Rossi Pin Point Braking System 714/514-2778 www.purerossi.com PN: R-001-S Rossi advanced pinpoint brake caliper and rotor. Superior stopping power.		AEM 2011 Honda CRZ Cold-Air System 800/992-3000 www.aemintakes.com PN: 21-700C; 21-700P A true cold-air intake for the Honda CRZ Sport Hybrid. Tuned for maximum horsepower and coolest IAT, this system delivers for the CRZ.		AEM 2010 Chevrolet Camaro Cold-Air System 800/992-3000 www.aemintakes.com PN: 21-8029C; 21-8029P Cold-air intake that delivers power and response to the Camaro SS. It features the AEM DryFlow filter for excellent filtration and ease of maintenance.
AEM ’09–’10 Dodge Challenger/Charger Cold-Air Intake 800/992-3000 www.aemintakes.com PN: 21-8223C; 21-8223P A true cold-air intake system that delivers power and response to the Dodge Challenger/Charger equipped with the 5.7L or 6.1L engine.		AccuAir Suspension Stainless e-Level Controller 877/247-3696 www.accuairsuspension.com PN: AA-ELS4-TPAD New e-Level Electronic Leveling Systems bring improved handling, ride quality and reliability to air suspension. All-new stainless-steel housings, three programmable heights, ride-monitor-mode adjusts while driving or parked. Industry first using TruPosition height sensors to provide accurate leveling regardless of load.		Aeromotive Inc. Universal Stealth Fuel System 913/647-7300 www.aeromotiveinc.com PN: 18668 Turn your tank or fuel cell into a stealth tank by dropping in this assembly, providing a high-horsepower in-tank solution for your fuel system.
Adaptronic Engine Management e1280s Super ECU +612-9899-9594 www.adaptronicecu.com PN: e1280s Universal ECU with 12 injector, eight ignition, eight aux and 16 analog in.; 4xVSS, 5xCAS, 2xKnock. Closed-loop everything. Add in any control functions you need.		Best New Tools & Equipment Product Runner-Up Auto Meter Products BVA-260 866/248-6356 www.autometer.com PN: BVA-260 Hand-held electrical system analyzer. Patented fully electrical system analyzer, providing battery, starter and alternator diagnostics in 82 seconds. AGM and conventional battery optimized.		AFCO/Dynatech ’79–’04 Mustang Tubular K Member 800/632-2320 www.afabcorp.com PN: 20022 Lightweight Mustang tubular K member. Available for Fox body Mustangs (’79–’93) and SN95 (’94–’04) models. A finite element stress analysis shows best weight-to-strength ratio on the market.

AFCO/Dynatech ’05–Up Mustang Strut 800/632-2320 www.afabcorp.com PN: 30023 Performance-bred design in a stock-looking strut. AFCO’s S197 Mustang (’05–up) strut will replace the factory unit and provide many benefits.

AFCO/Dynatech ’10 Camaro Strut 800/632-2320 www.afabcorp.com PN: 30024 High-performance strut targeted at the Camaro market. Enhance the handling of your Camaro with AFCO’s road-gripping coil-over-ready strut.		AFCO/Dynatech ’11 Mustang Long-Tube Header System 800/848-5850 www.dynatechheaders.com PN: 722-74310 Stainless-steel long-tube headers and exhaust for V8-based engines. Mandrel-bent 17/8 primaries; CNC laser-machined flanges; four-bolt ball-and-socket collectors with 3.00 X-pipe. Hardware and gaskets included.		ATI Performance Products Super Damper for Mitsubishi EVO 10 410/298-4343 www.atiracing.com PN: 918253 ATI Super Damper for the Mitsubishi EVO 10.
AFCO/Dynatech Tri-Y Dragster Header 800/848-5850 www.dynatechheaders.com PN: 750-98510 Tri-Y headers for BBC dragsters. The 21/4 stepped to 2–3/8x4.50 collector design improves torque, resulting in faster acceleration and quicker e.t.’s.		aFe-Advanced Flow Engineering Inc. Takeda Intake for Lexus IS-F 951/493-7100 www.afepower.com This intake mounts to the factory bottom intake box. This intake produced 16 hp and 15 lb.-ft. torque and outflows the factory intake by 20%.		Air Flow Research TXR Modular Composite Intake 661/257-8124 www.airflowresearch.com PN: 4801 Patented composite two-piece manifold runs 30º cooler, is 10 lbs. lighter and adds 15 hp over aluminum. Rubber gaskets for leak-proof sealing
Air Lift Co. Mustang Air Suspension 800/248-0892 www.airliftcompany.com PN: 77779 Bolt-on air suspension designed for ’05–’11 Ford Mustang. Dramatically improves ride and handling and delivers superior performance on either the street or the track.		Airaid 6-in. UBI (U-Build-It) Intake Tube 800/498-6951 www.airaid.com PN: 100-600 Brings out the fabricator in you. Check out this massive 6-in. intake tube. Comes with multiple straight sections in various lengths (4 in., 8 in. and 12 in.) and 30-, 45-, 60- and 90-degree bends. Cut and build your own custom intake for whatever project you are working on.		Airaid MXP Cold-Air Intake System 800/498-6951 www.airaid.com PN: 300-269 MXP series cold-air intake system for the ’94–’02 Cummins 5.9L diesel. Features a one-piece CAD-designed air box with an aluminum heat shield to keep intake air temperature charge cool. Full 6-in. venturi air intake tube with 4.5-in. coupler to use with the factory turbo, or an optional 5-in. coupler is available for oversized aftermarket turbos.
Airaid Concept II Air Cleaner Assembly 800/498-6951 www.airaid.com PN: 800-455 Concept II custom air cleaner assembly with 3-, 4- and 5-in. heights. Features SynthaMax oil-free 100% synthetic washable and re-usable media. Includes a standard 51/8-in. base plate and features our unique customizable lid that can be finished as you desire. Lid includes billet hold down and key fob billet wrench for easy installation and removal.		Airaid Powersports Cold-Air Intake for the Polaris RZR UTV 800/498-6951 www.airaid.com PN: 883-875 Features a fully sealed cold air box with drain. Re-located cold-air inlet scoop, eliminating the concern of dirt/dust ingestion. Optional snorkel tube for extreme conditions available. Airaid’s new SynthaMax dry-flowing air filter and foam pre-filter included.		Akrapovic D.D. Porsche GT3/RS Evolution Exhaust System 949/679-3491 www.akrapovic.com PN: S-PO997GT3FLE Akrapovic Titanium Porsche GT3/RS FL Evolution exhaust; 38 lbs. lighter than stock; 12hp increase. Sport Mode exhaust valve compatible.
Airaid MXP Cold-Air Intake System 800/498-6951 www.airaid.com PN: 450-264 For the ’11 Mustang 5.0L. Features a one-piece CAD-designed and roto-molded cold-air box and tube. Incorporates the factory cold-air scoop and features an Airaid premium filter.		Alliant Insurance Services Inc. SEIA Insurance Program 909/474-8794 www.seiainsurance.com Exclusive SEMA-member insurance program for manufacturers, wholesalers and retailers, including property, liability, garagekeepers, auto and workers’ compensation insurance coverage.		Aniceto Gomez S.A. Lowering Kit +541147000000 www.ag-suspension.com PN: AGKIT 320 AGKIT 320 Ford Fiesta ’11. Improves MPG, handling, braking, steering response. Reduces aerodynamic drag, body roll. Lowers center of gravity, stance.
AFCO/Dynatech ’79–’04 Mustang Strut 800/632-2320 www.afabcorp.com PN: 30022 Race-inspired valving in a durable package targeted at street and strip Mustangs. This strut will improve traction and consistency. This strut can be used as a coil-over.		Best New Interior Accessory Product Runner-Up B&M Racing and Performance Products Hurst HardDrive Stick 818/882-6422 www.hurst-shifters.com PN: 538 8650 or 538 85655 Stylish new interpretation of a classic Hurst handle, the new HardDrive pistol grips will surely add a modern flare to the interior of your vehicle.		ATI Performance Products Super Damper for ’11 Ford Mustang GT 5.0L Engine 410/298-4343 www.atiracing.com PN: 918047 ATI Super Damper for the ’11 Ford Mustang GT 5.0L engine.
ARC-Applied Racing Components Nitrous Bottle Warmer/Heater 386/760-5201 www.archeat.com Daytona Beach, Florida, introduces the ultimate nitrous bottle heater for 10-, 15- and 20-lb. bottles. Bring your bottle(s) up to desired pressure using your generator (about 5 minutes), then simply maintain bottle pressure from your car’s DC circuit. No significant battery draw.		ATS Diesel Performance Synergy Engine Control System 866/408-7916 www.atsdiesel.com/sema003 Synergy provides fully customizable control of engine functions and replaces the factory engine computer with a tunable module to optimize performance and drivability for diesels.		ARP Inc. Ultra-Torque 800/826-3045 www.arp-bolts.com PN: 100-9910 ARP Ultra-Torque reduces preload scatter and eliminates the need to cycle high-performance fasteners. ARP Ultra-Torque delivers more consistent, repeatable fastener tension pre-loads than any other lubricant available today.
ATI Performance Products Super Damper for Ford GT 500 Supercharged 5.4L Engine 410/298-4343 www.atiracing.com PN: 918046 ATI Super Damper for the Ford GT 500 supercharged 5.4L engine.		AnzoUSA Dual Four-Wire Flat Adapter 888/360-3696 www.anzousa.com PN: 851009 Impact and corrosion resistant. Flexible wire provides for more installation options, ability to run more than one four-wire flat connection, simple plug-and-play. Plugs into any vehicle side four-wire flat; color-coded wiring to match most trailer applications.		ATI Performance Products Super Damper for ’10 Camaro V6 410/298-4343 www.atiracing.com PN: 918637 ATI Super Damper for the ’10 Camaro V6; 10% underdrive accessory pulley; accepts six-bolt supercharger pulley made by LPE; aluminum shell, pulley with steel hub.
ATS Diesel Performance Co-Pilot 68-RFE 866/408-7916 www.atsdiesel.com/sema002 The Co-pilot for the 68-RFE transmission in the late-model Dodge Ram provides precise control of internal pressure for improved torque handling and shift quality.		ATS Diesel Performance Atomizer Fuel Rail Controller 866/408-7916 www.atsdiesel.com/sema001 Atomizer module gives on-dash control of fuel rail pressure in late-model diesel vehicles, providing increased power and fuel economy with built-in safety features.		Auto Meter Products Prestige Beige 866/248-6356 www.autometer.com PN: 2000 Award-winning traditional street-rod styling featuring full dial, LED illumination, an antique pointer and one-step, push-button speedometer calibration.
Auto Meter Products Prestige Black 866/248-6356 www.autometer.com PN: 2001 Award-winning style, unmatched performance, hybrid spun-metal dial featuring high-definition visibility and the first-ever antique-styled, fully illuminated pointer.		Auto Meter Products Ford Factory Match 866/248-6356 www.autometer.com PN: 8404-8496 Match your truck’s dash with our through-the-dial LED instruments designed specifically for Ford trucks, featuring transmission temp, boost, EGT gauges and HPOP.		BBK Performance Inc. 70mm Power Plus Series ’11 Mustang V6 Throttle Body 951/296-1771 www.bbkperformance.com Direct bolt-on. Complete with all electronics, etc. No tune required, no adjustments needed. Adds 8–10 hp.
Auto Meter Products DVR 3 866/248-6356 www.autometer.com PN: DVR-3 Maximize your performance with our track-tested, ruggedized digital video recorder featuring three camera inputs, variable recording rates and synchronized data logging.		Auto Meter Products Mustang Direct-Fit Cluster and A-Pillar 866/248-6356 www.autometer.com Trick out your late-model Mustang with our Direct Fit three-gauge cluster or three-gauge A-pillar mounting solution.		Auto Meter Products TPMS 866/248-6356 www.autometer.com Battery-less tire-pressure monitoring system for harsh environments. Detects slow punctures before the driver feels them. Measures temperature as well as pressure. Includes in-vehicle real-time driver display.

 

 

 

 

 

 

 

 

 

 

 

 

 

BBK Performance Inc. 85mm Power Plus Series ’11 Mustang GT Throttle Body 951/296-1771 www.bbkperformance.com Direct bolt-on. Requires no tune. Complete with electronics. Adds 8–10 hp.		BBK Performance Inc. CNC Series Tuned-Length Shorty Headers for the ’11 Mustang GT 951/296-1771 www.bbkperformance.com Direct bolt-on. No tune required; 13/4-in. CNC mandrel-bent tubing; 3/8-in.-thick flanges available in chrome and ceramic coatings.		BBK Performance Inc. Cold-Air Induction System for the ’11 Mustang GT 951/296-1771 www.bbkperformance.com Direct bolt-on. No tune required. Show-chromed finish. CNC-machined aluminum mass-air/filter housing, washable high-flow filter. Adds 10–12 hp.
BD Diesel Performance 7.3L Turbo Thruster II 800/887-5030 www.dieselperformance.com PN: 1047510 BD’s Turbo Thruster II for the Ford ’99.5–’03 7.3L Power Stroke provides a 40% increase in air flow with no compressor surging or choked-off turbine flow.		BD Diesel Performance Killer B Turbo 800/887-5030 www.dieselperformance.com PN: 1045160 Designed for ’03–’07 Dodge 5.9L CR-diesels, the Killer B Turbo is a Borg Warner/BD-engineered match for engines developing from stock up to a 200hp increase.		BBK Performance Inc. Cold-Air Induction System for the ’11 Mustang V6 951/296-1771 www.bbkperformance.com Show-chromed finish, high-flow washable filter. Direct bolt-on adds 8–10 hp.
BD Diesel Performance 6.0L Turbo Thruster II/Diverter Valve 800/887-5030 www.dieselperformance.com PN: 1047070 Replaces stock Ford ’03–’07 6.0L Power Stroke variable-geometry turbochargers that are prone to sticking, causing poor response and low performance when adding electronic modules.		BDL/Jamar Dual-Caliper Brake Kit 714/693-1313, Ext. 236 www.jamarperformance.com PN: DB200BB Dual-caliper five-lug, two-piston rear disc brake conversion kit. Jamar’s billet five-lug rear disc brake.		BGF Industries Barracuda 800/476-4845 www.bgf.com Barracuda aluminized fiberglass fabric is moldable, strong, durable and lightweight like traditional high-performance fiberglass but has the flashy looks of woven steel. When transformed into an automotive composite part, Barracuda’s unique beauty and strength will make your product stand out from all the rest.
Billy Boat Performance Exhaust Porsche 997.2 Exhaust 888/228-7435 www.bbexhaust.com PN: FPOR-0878 & FPOR-2535 Precision crafted from 100% T304 stainless steel, this bolt-on exhaust system not only gives a distinctive exhaust note, but it also provides increases in horsepower and torque.		Best New Performance-Racing Runner-Up BD Diesel Performance Big Daddy Race Turbo/Diverter Valve 800/887-5030 www.dieselperformance.com PN: 1404100 BD’s exclusive design turbine diverter valve provides racers with good low-engine rpm turbo response right through to peak operating rpm when using large single-race turbos.		Bilstein Shock Absorbers 60MM Monotube HD Shock Absorber–Freightliner Trucks 800/537-1085 www.bilsteinus.com A 60mm large-bore, heavy-duty monotube shock absorber for commercial class 1 through class 8 trucks and race car haulers.
Billy Boat Performance Exhaust Volkswagen MK6 GTi Exhaust 888/228-7435 www.bbexhaust.com PN: FPIM-0350/0351 Incorporating B&B’s proprietary PRT (Purge Resonance Technology), this turbo-back exhaust system emits a forceful note on hard acceleration yet a mild note at idle and cruising speeds.		Adaptronic Engine Management Select Mazda Miata NBB SE Plug-In ECU +612-9899-9594 www.adaptronicecu.com PN: Select NBB Piggyback plug-in for the Mazda Miata NBB. Controls boost (factory turbo) or VVT (infinitely variable). Full control of engine; factory ECU is retained for alternator and immobilizer. Also available for the Mazda RX8 and Miata NBA.		ACT, Advanced Clutch Technology T1RR-H01 661/940-7555 www.advancedclutch.com/home.aspx PN: T1RR-H01 The ACT Race twin-disc kit offers Honda enthusiasts a race-ready complete direct bolt-in kit that has holding capacity (770 lb.-ft. of torque).
Bilstein Shock Absorbers Mustang II Coil-Over System 800/537-1085 www.bilsteinus.com Ride-height adjustable aluminum-threaded body coil-over system for Mustang II frontends. Uses 46mm monotube construction.		Bilstein Shock Absorbers Modular Damping System–Porsche GT3 (997) 800/537-1085 www.bilsteinus.com Aluminum body coil-over monotube shock with an independent 10-way rebound and 10-way compression adjustable shaft. Shaft utilizes a 1:1 linear billet valving piston.		BorgWarner Turbo Systems AirWerks S400SX4 Performance Turbochargers 800/787-6464 www.airwerksboosted.com The BorgWarner-AirWerks S400SX4 turbo model group has been expanded to include compressor wheel sizes 76, 80, 82 and 88 mm. These additions give pro racers and the street tuner off-the-shelf availability of turbos that feature extended-tip technology for aero high efficiency and product performance.

Those SEMA News readers who have been around the block once or twice may recall the early days of the hot-rod scene and how it progressed from the street to the strip, spawning countless businesses and institutions.

One relic of those days is the work of Pete Millar, who celebrated and satirized the lifestyle, the people and the institutions of the day in magazines such as Rod & Custom, Hot Rod, Car Craft, CARtoons and his own magazine, Drag Cartoons. By the time this strip was originally published in June of 1963, Millar was making the point that street racing was out and safety was important for all enthusiasts. It’s a message that resonates to this day.

Nostalgia for simpler days remains strong within the racing and performance segment, underlined by new products intended for earlier engines and vintage platforms. Along with those, as you’ll see in the coming pages, are new products reflecting the future of the segment. (For a digital version of each entry, point your Internet browser to www.semadigital.com and simply search for a product by company name, part description or application.)

SEMA is an institution that the racing and performance industry helped create, so it’s no surprise that for many who attended the 2010 SEMA Show, racing and performance parts are the main attraction.

This year, 479 Racing & Performance exhibitors filled Central Hall, and buyers swarmed over the area. Half of all active buyers at the Show (52%) spent at least part of their week in this section of the Las Vegas Convention Center. Measured in scans of attendee badges, buyers opened up dialogue on the Show floor with racing and performance exhibitors a total of 60,805 times.

Four out of five buyers (74%), also made a visit to the New Products Showcase, where predictably, racing and performance manufacturers made a strong showing in terms of new-product launches. Their entries were scanned 8,835 times by attending media and buyers using handheld remote scanners.

Along with the products shown here, we’ve interviewed industry executives to get their thoughts about the trends they perceive and, perhaps, some words of advice about what might lie ahead. You’ll see their comments and predictions as you page through the story.

Adaptronic Engine Management Select Mazda RX8 Plug-In ECU +612-9899-9594 www.adaptronicecu.com PN: Select RX8 Plug-in piggyback ECU for Mazda RX8 Series 1. Full control over ignition, fuel and intake. Works on a MAP sensor or standard airflow sensor.		Adaptronic Engine Management Select Nissan S15 Plug-In ECU +612-9899-9594 www.adaptronicecu.com PN: Select S15 Standalone plug-in ECU for Nissan S15 SR20DET (240SX/Silvia/200SX). Full control of fuel, ignition, idle, boost, aircon, thermofan and VVT.		ADDCO Manufacturing Inc. Maintenance-Free Urethane Midsection Sway Bar Bushings 800/621-8916 www.addco.net PN: 614W Maintenance-free urethane sway bar midsection bushing.
ADDCO Manufacturing Inc. Rossi Pin Point Braking System 714/514-2778 www.purerossi.com PN: R-001-S Rossi advanced pinpoint brake caliper and rotor. Superior stopping power.		AEM 2011 Honda CRZ Cold-Air System 800/992-3000 www.aemintakes.com PN: 21-700C; 21-700P A true cold-air intake for the Honda CRZ Sport Hybrid. Tuned for maximum horsepower and coolest IAT, this system delivers for the CRZ.		AEM 2010 Chevrolet Camaro Cold-Air System 800/992-3000 www.aemintakes.com PN: 21-8029C; 21-8029P Cold-air intake that delivers power and response to the Camaro SS. It features the AEM DryFlow filter for excellent filtration and ease of maintenance.
AEM ’09–’10 Dodge Challenger/Charger Cold-Air Intake 800/992-3000 www.aemintakes.com PN: 21-8223C; 21-8223P A true cold-air intake system that delivers power and response to the Dodge Challenger/Charger equipped with the 5.7L or 6.1L engine.		AccuAir Suspension Stainless e-Level Controller 877/247-3696 www.accuairsuspension.com PN: AA-ELS4-TPAD New e-Level Electronic Leveling Systems bring improved handling, ride quality and reliability to air suspension. All-new stainless-steel housings, three programmable heights, ride-monitor-mode adjusts while driving or parked. Industry first using TruPosition height sensors to provide accurate leveling regardless of load.		Aeromotive Inc. Universal Stealth Fuel System 913/647-7300 www.aeromotiveinc.com PN: 18668 Turn your tank or fuel cell into a stealth tank by dropping in this assembly, providing a high-horsepower in-tank solution for your fuel system.
Adaptronic Engine Management e1280s Super ECU +612-9899-9594 www.adaptronicecu.com PN: e1280s Universal ECU with 12 injector, eight ignition, eight aux and 16 analog in.; 4xVSS, 5xCAS, 2xKnock. Closed-loop everything. Add in any control functions you need.		Best New Tools & Equipment Product Runner-Up Auto Meter Products BVA-260 866/248-6356 www.autometer.com PN: BVA-260 Hand-held electrical system analyzer. Patented fully electrical system analyzer, providing battery, starter and alternator diagnostics in 82 seconds. AGM and conventional battery optimized.		AFCO/Dynatech ’79–’04 Mustang Tubular K Member 800/632-2320 www.afabcorp.com PN: 20022 Lightweight Mustang tubular K member. Available for Fox body Mustangs (’79–’93) and SN95 (’94–’04) models. A finite element stress analysis shows best weight-to-strength ratio on the market.

AFCO/Dynatech ’05–Up Mustang Strut 800/632-2320 www.afabcorp.com PN: 30023 Performance-bred design in a stock-looking strut. AFCO’s S197 Mustang (’05–up) strut will replace the factory unit and provide many benefits.

AFCO/Dynatech ’10 Camaro Strut 800/632-2320 www.afabcorp.com PN: 30024 High-performance strut targeted at the Camaro market. Enhance the handling of your Camaro with AFCO’s road-gripping coil-over-ready strut.		AFCO/Dynatech ’11 Mustang Long-Tube Header System 800/848-5850 www.dynatechheaders.com PN: 722-74310 Stainless-steel long-tube headers and exhaust for V8-based engines. Mandrel-bent 17/8 primaries; CNC laser-machined flanges; four-bolt ball-and-socket collectors with 3.00 X-pipe. Hardware and gaskets included.		ATI Performance Products Super Damper for Mitsubishi EVO 10 410/298-4343 www.atiracing.com PN: 918253 ATI Super Damper for the Mitsubishi EVO 10.
AFCO/Dynatech Tri-Y Dragster Header 800/848-5850 www.dynatechheaders.com PN: 750-98510 Tri-Y headers for BBC dragsters. The 21/4 stepped to 2–3/8x4.50 collector design improves torque, resulting in faster acceleration and quicker e.t.’s.		aFe-Advanced Flow Engineering Inc. Takeda Intake for Lexus IS-F 951/493-7100 www.afepower.com This intake mounts to the factory bottom intake box. This intake produced 16 hp and 15 lb.-ft. torque and outflows the factory intake by 20%.		Air Flow Research TXR Modular Composite Intake 661/257-8124 www.airflowresearch.com PN: 4801 Patented composite two-piece manifold runs 30º cooler, is 10 lbs. lighter and adds 15 hp over aluminum. Rubber gaskets for leak-proof sealing
Air Lift Co. Mustang Air Suspension 800/248-0892 www.airliftcompany.com PN: 77779 Bolt-on air suspension designed for ’05–’11 Ford Mustang. Dramatically improves ride and handling and delivers superior performance on either the street or the track.		Airaid 6-in. UBI (U-Build-It) Intake Tube 800/498-6951 www.airaid.com PN: 100-600 Brings out the fabricator in you. Check out this massive 6-in. intake tube. Comes with multiple straight sections in various lengths (4 in., 8 in. and 12 in.) and 30-, 45-, 60- and 90-degree bends. Cut and build your own custom intake for whatever project you are working on.		Airaid MXP Cold-Air Intake System 800/498-6951 www.airaid.com PN: 300-269 MXP series cold-air intake system for the ’94–’02 Cummins 5.9L diesel. Features a one-piece CAD-designed air box with an aluminum heat shield to keep intake air temperature charge cool. Full 6-in. venturi air intake tube with 4.5-in. coupler to use with the factory turbo, or an optional 5-in. coupler is available for oversized aftermarket turbos.
Airaid Concept II Air Cleaner Assembly 800/498-6951 www.airaid.com PN: 800-455 Concept II custom air cleaner assembly with 3-, 4- and 5-in. heights. Features SynthaMax oil-free 100% synthetic washable and re-usable media. Includes a standard 51/8-in. base plate and features our unique customizable lid that can be finished as you desire. Lid includes billet hold down and key fob billet wrench for easy installation and removal.		Airaid Powersports Cold-Air Intake for the Polaris RZR UTV 800/498-6951 www.airaid.com PN: 883-875 Features a fully sealed cold air box with drain. Re-located cold-air inlet scoop, eliminating the concern of dirt/dust ingestion. Optional snorkel tube for extreme conditions available. Airaid’s new SynthaMax dry-flowing air filter and foam pre-filter included.		Akrapovic D.D. Porsche GT3/RS Evolution Exhaust System 949/679-3491 www.akrapovic.com PN: S-PO997GT3FLE Akrapovic Titanium Porsche GT3/RS FL Evolution exhaust; 38 lbs. lighter than stock; 12hp increase. Sport Mode exhaust valve compatible.
Airaid MXP Cold-Air Intake System 800/498-6951 www.airaid.com PN: 450-264 For the ’11 Mustang 5.0L. Features a one-piece CAD-designed and roto-molded cold-air box and tube. Incorporates the factory cold-air scoop and features an Airaid premium filter.		Alliant Insurance Services Inc. SEIA Insurance Program 909/474-8794 www.seiainsurance.com Exclusive SEMA-member insurance program for manufacturers, wholesalers and retailers, including property, liability, garagekeepers, auto and workers’ compensation insurance coverage.		Aniceto Gomez S.A. Lowering Kit +541147000000 www.ag-suspension.com PN: AGKIT 320 AGKIT 320 Ford Fiesta ’11. Improves MPG, handling, braking, steering response. Reduces aerodynamic drag, body roll. Lowers center of gravity, stance.
AFCO/Dynatech ’79–’04 Mustang Strut 800/632-2320 www.afabcorp.com PN: 30022 Race-inspired valving in a durable package targeted at street and strip Mustangs. This strut will improve traction and consistency. This strut can be used as a coil-over.		Best New Interior Accessory Product Runner-Up B&M Racing and Performance Products Hurst HardDrive Stick 818/882-6422 www.hurst-shifters.com PN: 538 8650 or 538 85655 Stylish new interpretation of a classic Hurst handle, the new HardDrive pistol grips will surely add a modern flare to the interior of your vehicle.		ATI Performance Products Super Damper for ’11 Ford Mustang GT 5.0L Engine 410/298-4343 www.atiracing.com PN: 918047 ATI Super Damper for the ’11 Ford Mustang GT 5.0L engine.
ARC-Applied Racing Components Nitrous Bottle Warmer/Heater 386/760-5201 www.archeat.com Daytona Beach, Florida, introduces the ultimate nitrous bottle heater for 10-, 15- and 20-lb. bottles. Bring your bottle(s) up to desired pressure using your generator (about 5 minutes), then simply maintain bottle pressure from your car’s DC circuit. No significant battery draw.		ATS Diesel Performance Synergy Engine Control System 866/408-7916 www.atsdiesel.com/sema003 Synergy provides fully customizable control of engine functions and replaces the factory engine computer with a tunable module to optimize performance and drivability for diesels.		ARP Inc. Ultra-Torque 800/826-3045 www.arp-bolts.com PN: 100-9910 ARP Ultra-Torque reduces preload scatter and eliminates the need to cycle high-performance fasteners. ARP Ultra-Torque delivers more consistent, repeatable fastener tension pre-loads than any other lubricant available today.
ATI Performance Products Super Damper for Ford GT 500 Supercharged 5.4L Engine 410/298-4343 www.atiracing.com PN: 918046 ATI Super Damper for the Ford GT 500 supercharged 5.4L engine.		AnzoUSA Dual Four-Wire Flat Adapter 888/360-3696 www.anzousa.com PN: 851009 Impact and corrosion resistant. Flexible wire provides for more installation options, ability to run more than one four-wire flat connection, simple plug-and-play. Plugs into any vehicle side four-wire flat; color-coded wiring to match most trailer applications.		ATI Performance Products Super Damper for ’10 Camaro V6 410/298-4343 www.atiracing.com PN: 918637 ATI Super Damper for the ’10 Camaro V6; 10% underdrive accessory pulley; accepts six-bolt supercharger pulley made by LPE; aluminum shell, pulley with steel hub.
ATS Diesel Performance Co-Pilot 68-RFE 866/408-7916 www.atsdiesel.com/sema002 The Co-pilot for the 68-RFE transmission in the late-model Dodge Ram provides precise control of internal pressure for improved torque handling and shift quality.		ATS Diesel Performance Atomizer Fuel Rail Controller 866/408-7916 www.atsdiesel.com/sema001 Atomizer module gives on-dash control of fuel rail pressure in late-model diesel vehicles, providing increased power and fuel economy with built-in safety features.		Auto Meter Products Prestige Beige 866/248-6356 www.autometer.com PN: 2000 Award-winning traditional street-rod styling featuring full dial, LED illumination, an antique pointer and one-step, push-button speedometer calibration.
Auto Meter Products Prestige Black 866/248-6356 www.autometer.com PN: 2001 Award-winning style, unmatched performance, hybrid spun-metal dial featuring high-definition visibility and the first-ever antique-styled, fully illuminated pointer.		Auto Meter Products Ford Factory Match 866/248-6356 www.autometer.com PN: 8404-8496 Match your truck’s dash with our through-the-dial LED instruments designed specifically for Ford trucks, featuring transmission temp, boost, EGT gauges and HPOP.		BBK Performance Inc. 70mm Power Plus Series ’11 Mustang V6 Throttle Body 951/296-1771 www.bbkperformance.com Direct bolt-on. Complete with all electronics, etc. No tune required, no adjustments needed. Adds 8–10 hp.
Auto Meter Products DVR 3 866/248-6356 www.autometer.com PN: DVR-3 Maximize your performance with our track-tested, ruggedized digital video recorder featuring three camera inputs, variable recording rates and synchronized data logging.		Auto Meter Products Mustang Direct-Fit Cluster and A-Pillar 866/248-6356 www.autometer.com Trick out your late-model Mustang with our Direct Fit three-gauge cluster or three-gauge A-pillar mounting solution.		Auto Meter Products TPMS 866/248-6356 www.autometer.com Battery-less tire-pressure monitoring system for harsh environments. Detects slow punctures before the driver feels them. Measures temperature as well as pressure. Includes in-vehicle real-time driver display.

 

 

 

 

 

 

 

 

 

 

 

 

 

BBK Performance Inc. 85mm Power Plus Series ’11 Mustang GT Throttle Body 951/296-1771 www.bbkperformance.com Direct bolt-on. Requires no tune. Complete with electronics. Adds 8–10 hp.		BBK Performance Inc. CNC Series Tuned-Length Shorty Headers for the ’11 Mustang GT 951/296-1771 www.bbkperformance.com Direct bolt-on. No tune required; 13/4-in. CNC mandrel-bent tubing; 3/8-in.-thick flanges available in chrome and ceramic coatings.		BBK Performance Inc. Cold-Air Induction System for the ’11 Mustang GT 951/296-1771 www.bbkperformance.com Direct bolt-on. No tune required. Show-chromed finish. CNC-machined aluminum mass-air/filter housing, washable high-flow filter. Adds 10–12 hp.
BD Diesel Performance 7.3L Turbo Thruster II 800/887-5030 www.dieselperformance.com PN: 1047510 BD’s Turbo Thruster II for the Ford ’99.5–’03 7.3L Power Stroke provides a 40% increase in air flow with no compressor surging or choked-off turbine flow.		BD Diesel Performance Killer B Turbo 800/887-5030 www.dieselperformance.com PN: 1045160 Designed for ’03–’07 Dodge 5.9L CR-diesels, the Killer B Turbo is a Borg Warner/BD-engineered match for engines developing from stock up to a 200hp increase.		BBK Performance Inc. Cold-Air Induction System for the ’11 Mustang V6 951/296-1771 www.bbkperformance.com Show-chromed finish, high-flow washable filter. Direct bolt-on adds 8–10 hp.
BD Diesel Performance 6.0L Turbo Thruster II/Diverter Valve 800/887-5030 www.dieselperformance.com PN: 1047070 Replaces stock Ford ’03–’07 6.0L Power Stroke variable-geometry turbochargers that are prone to sticking, causing poor response and low performance when adding electronic modules.		BDL/Jamar Dual-Caliper Brake Kit 714/693-1313, Ext. 236 www.jamarperformance.com PN: DB200BB Dual-caliper five-lug, two-piston rear disc brake conversion kit. Jamar’s billet five-lug rear disc brake.		BGF Industries Barracuda 800/476-4845 www.bgf.com Barracuda aluminized fiberglass fabric is moldable, strong, durable and lightweight like traditional high-performance fiberglass but has the flashy looks of woven steel. When transformed into an automotive composite part, Barracuda’s unique beauty and strength will make your product stand out from all the rest.
Billy Boat Performance Exhaust Porsche 997.2 Exhaust 888/228-7435 www.bbexhaust.com PN: FPOR-0878 & FPOR-2535 Precision crafted from 100% T304 stainless steel, this bolt-on exhaust system not only gives a distinctive exhaust note, but it also provides increases in horsepower and torque.		Best New Performance-Racing Runner-Up BD Diesel Performance Big Daddy Race Turbo/Diverter Valve 800/887-5030 www.dieselperformance.com PN: 1404100 BD’s exclusive design turbine diverter valve provides racers with good low-engine rpm turbo response right through to peak operating rpm when using large single-race turbos.		Bilstein Shock Absorbers 60MM Monotube HD Shock Absorber–Freightliner Trucks 800/537-1085 www.bilsteinus.com A 60mm large-bore, heavy-duty monotube shock absorber for commercial class 1 through class 8 trucks and race car haulers.
Billy Boat Performance Exhaust Volkswagen MK6 GTi Exhaust 888/228-7435 www.bbexhaust.com PN: FPIM-0350/0351 Incorporating B&B’s proprietary PRT (Purge Resonance Technology), this turbo-back exhaust system emits a forceful note on hard acceleration yet a mild note at idle and cruising speeds.		Adaptronic Engine Management Select Mazda Miata NBB SE Plug-In ECU +612-9899-9594 www.adaptronicecu.com PN: Select NBB Piggyback plug-in for the Mazda Miata NBB. Controls boost (factory turbo) or VVT (infinitely variable). Full control of engine; factory ECU is retained for alternator and immobilizer. Also available for the Mazda RX8 and Miata NBA.		ACT, Advanced Clutch Technology T1RR-H01 661/940-7555 www.advancedclutch.com/home.aspx PN: T1RR-H01 The ACT Race twin-disc kit offers Honda enthusiasts a race-ready complete direct bolt-in kit that has holding capacity (770 lb.-ft. of torque).
Bilstein Shock Absorbers Mustang II Coil-Over System 800/537-1085 www.bilsteinus.com Ride-height adjustable aluminum-threaded body coil-over system for Mustang II frontends. Uses 46mm monotube construction.		Bilstein Shock Absorbers Modular Damping System–Porsche GT3 (997) 800/537-1085 www.bilsteinus.com Aluminum body coil-over monotube shock with an independent 10-way rebound and 10-way compression adjustable shaft. Shaft utilizes a 1:1 linear billet valving piston.		BorgWarner Turbo Systems AirWerks S400SX4 Performance Turbochargers 800/787-6464 www.airwerksboosted.com The BorgWarner-AirWerks S400SX4 turbo model group has been expanded to include compressor wheel sizes 76, 80, 82 and 88 mm. These additions give pro racers and the street tuner off-the-shelf availability of turbos that feature extended-tip technology for aero high efficiency and product performance.