Thu, 10/24/2019 - 14:05

By SEMA Editors

Andrea Green

October’s SEMA Businesswomen’s Network (SBN) “She Is Spotlight” features Andrea Green from K&N Engineering. Take a look at her Q&A with SBN below:

SEMA: What is the best advice you have ever received?

Andrea Green: Work smarter, not harder.

SEMA: What keeps you involved in this industry?

AG: Learning how our innovation helps improve consumers and racers driving experience.

SEMA: On a Saturday, where can you be found?

AG: Volunteering with various non-profit groups within my community. This includes supporting local schools, teams and groups reach their goals with my family by my side.

SEMA: How do you prepare for going to an important meeting?

AG: Prepared with research, notepad, pen and an open mind.

SEMA: If you could go to lunch with one industry leader, living or dead, who would it be?

EM: Jessi Combs. She was an amazing woman who wasn’t afraid to put herself out there.

Fill out this form to be a part of the #SheIsSEMA family. You will have the opportunity to be featured on SBN’s social media, SEMA eNews and be recognized on the www.sema.org/sheissema website. While there, check out other inspirational women who are leading the industry and are paving the path for future success.

Not an SBN member? Fill out this form to join today.

Thu, 10/24/2019 - 14:05

By SEMA Editors

Andrea Green

October’s SEMA Businesswomen’s Network (SBN) “She Is Spotlight” features Andrea Green from K&N Engineering. Take a look at her Q&A with SBN below:

SEMA: What is the best advice you have ever received?

Andrea Green: Work smarter, not harder.

SEMA: What keeps you involved in this industry?

AG: Learning how our innovation helps improve consumers and racers driving experience.

SEMA: On a Saturday, where can you be found?

AG: Volunteering with various non-profit groups within my community. This includes supporting local schools, teams and groups reach their goals with my family by my side.

SEMA: How do you prepare for going to an important meeting?

AG: Prepared with research, notepad, pen and an open mind.

SEMA: If you could go to lunch with one industry leader, living or dead, who would it be?

EM: Jessi Combs. She was an amazing woman who wasn’t afraid to put herself out there.

Fill out this form to be a part of the #SheIsSEMA family. You will have the opportunity to be featured on SBN’s social media, SEMA eNews and be recognized on the www.sema.org/sheissema website. While there, check out other inspirational women who are leading the industry and are paving the path for future success.

Not an SBN member? Fill out this form to join today.

Thu, 10/24/2019 - 14:00

By Fredy Ramirez

The SEMA Data Co-op (SDC) is “data central” for hundreds of specialty parts brands, representing millions of part numbers and tens of millions of vehicle applications. Created by SEMA, the SDC is the definitive, industry-owned and -operated centralized data repository, complete with a comprehensive set of online data management tools.

The product releases below are from SEMA members who are also part of the SDC at the the Bronze, Silver, Gold or Platinum level. Learn more about the SDC at www.semadatacoop.org.

SDC members are invited to submit new-product press releases for consideration to editors@sema.org.

Jammer CAI Dry Filter

Powerteq releases the Jammer Cold Air Intake for the ’13–’18 Ram 6.7L Cummins. The intake is designed to optimize tge truck's performance. The design is engineered to improve airflow by blocking hot air and using cooler, denser air for optimal efficiency.

888-227-2447
https://superchips.com
PN: 38255-D

 

Powerteq
 

Kia Stinger GT Direct-Fit Catch Can

Mishimoto introduces the Kia Stinger GT Direct-Fit Catch can. The can is designed to reduce carbon buildup on intake valves. The can is engineered to defend intake systems and essential components from oil blow-by.

877-466-4744
www.mishimoto.com
PN: MMBCC-STNGR-18PBE



Kia
 

Edelbrock Single-Quad Manifold and Carb Kit

Edelbrock announces the release of a Single-Quad Manifold and carb kit for Small-Block Ford 289–302 applications. These kits include: an Edelbrock manifold, Performer or Thunder Series AVS carb, chrome fuel inlet, intake gasket set, intake bolt set and carb stud kit. The manifold and carbs are available with a standard satin finish or with an EnduraShine chrome-like finish.

888-799-1135
www.edelbrock.com
PN: 2031

Edelbrock
 

Edelbrock Performer RPM 450 HP Top End Kit

Edelbrock introduces a Performer RPM Top End Kit for ‘65-‘76 Big-Block Oldsmobile 400-500 C.I.D. V-8 engines. The kit is designed to produce 450 hp and 541 lbs.-torque on a 455 C.I.D engine with 9.5:1 compression. The kit is engineered to deliver improved performance in street applications from 1,500 to 6,500 rpm range. This kit includes an RPM intake manifold, Performer RPM cylinder heads, hydraulic cam and lifters, timing chain complete bolt kits and an Edelbrock gasket set.

888-799-1135
www.edelbrock.com
PN: 2058

 

Edelbrock

 

Thu, 10/24/2019 - 14:00

By Fredy Ramirez

The SEMA Data Co-op (SDC) is “data central” for hundreds of specialty parts brands, representing millions of part numbers and tens of millions of vehicle applications. Created by SEMA, the SDC is the definitive, industry-owned and -operated centralized data repository, complete with a comprehensive set of online data management tools.

The product releases below are from SEMA members who are also part of the SDC at the the Bronze, Silver, Gold or Platinum level. Learn more about the SDC at www.semadatacoop.org.

SDC members are invited to submit new-product press releases for consideration to editors@sema.org.

Jammer CAI Dry Filter

Powerteq releases the Jammer Cold Air Intake for the ’13–’18 Ram 6.7L Cummins. The intake is designed to optimize tge truck's performance. The design is engineered to improve airflow by blocking hot air and using cooler, denser air for optimal efficiency.

888-227-2447
https://superchips.com
PN: 38255-D

 

Powerteq
 

Kia Stinger GT Direct-Fit Catch Can

Mishimoto introduces the Kia Stinger GT Direct-Fit Catch can. The can is designed to reduce carbon buildup on intake valves. The can is engineered to defend intake systems and essential components from oil blow-by.

877-466-4744
www.mishimoto.com
PN: MMBCC-STNGR-18PBE



Kia
 

Edelbrock Single-Quad Manifold and Carb Kit

Edelbrock announces the release of a Single-Quad Manifold and carb kit for Small-Block Ford 289–302 applications. These kits include: an Edelbrock manifold, Performer or Thunder Series AVS carb, chrome fuel inlet, intake gasket set, intake bolt set and carb stud kit. The manifold and carbs are available with a standard satin finish or with an EnduraShine chrome-like finish.

888-799-1135
www.edelbrock.com
PN: 2031

Edelbrock
 

Edelbrock Performer RPM 450 HP Top End Kit

Edelbrock introduces a Performer RPM Top End Kit for ‘65-‘76 Big-Block Oldsmobile 400-500 C.I.D. V-8 engines. The kit is designed to produce 450 hp and 541 lbs.-torque on a 455 C.I.D engine with 9.5:1 compression. The kit is engineered to deliver improved performance in street applications from 1,500 to 6,500 rpm range. This kit includes an RPM intake manifold, Performer RPM cylinder heads, hydraulic cam and lifters, timing chain complete bolt kits and an Edelbrock gasket set.

888-799-1135
www.edelbrock.com
PN: 2058

 

Edelbrock

 

Thu, 10/24/2019 - 13:44

By SEMA Washington, D.C., Staff

The National Highway Traffic Safety Administration (NHTSA) is seeking public comment on whether to give automakers the option of installing camera monitoring systems in place of outside and inside rearview mirrors. The mirrors are required under Federal Motor Vehicle Safety Standard No. 111, Rear Visibility, which mandates the ability to view objects that are behind or to the side of the vehicle. The automakers have petitioned the agency for the change, citing new camera and visual display technology provides an equivalent level of safety. Such systems are now permitted in many countries in Europe and Asia. NHTSA has been gathering technical information to review the issue and is now seeking public comments, due by December 9, 2019. 

For more information, contact Stuart Gosswein at stuartg@sema.org.

Thu, 10/24/2019 - 13:44

By SEMA Washington, D.C., Staff

The National Highway Traffic Safety Administration (NHTSA) is seeking public comment on whether to give automakers the option of installing camera monitoring systems in place of outside and inside rearview mirrors. The mirrors are required under Federal Motor Vehicle Safety Standard No. 111, Rear Visibility, which mandates the ability to view objects that are behind or to the side of the vehicle. The automakers have petitioned the agency for the change, citing new camera and visual display technology provides an equivalent level of safety. Such systems are now permitted in many countries in Europe and Asia. NHTSA has been gathering technical information to review the issue and is now seeking public comments, due by December 9, 2019. 

For more information, contact Stuart Gosswein at stuartg@sema.org.

Thu, 10/24/2019 - 13:44

By SEMA Washington, D.C., Staff

The National Highway Traffic Safety Administration (NHTSA) is seeking public comment on whether to give automakers the option of installing camera monitoring systems in place of outside and inside rearview mirrors. The mirrors are required under Federal Motor Vehicle Safety Standard No. 111, Rear Visibility, which mandates the ability to view objects that are behind or to the side of the vehicle. The automakers have petitioned the agency for the change, citing new camera and visual display technology provides an equivalent level of safety. Such systems are now permitted in many countries in Europe and Asia. NHTSA has been gathering technical information to review the issue and is now seeking public comments, due by December 9, 2019. 

For more information, contact Stuart Gosswein at stuartg@sema.org.

Thu, 10/24/2019 - 13:43

By Rachel Tatum

Online Media Center
Members of the media can find exhibitor press releases in the SEMA Show Online Media Center.

The 2019 SEMA Show is less than two weeks away and exhibitors are sharing their latest updates for the event taking place, November 5–8, in Las Vegas. New product debuts and innovations are the center of the premier automotive trade show. Many of the announcements can be found in the SEMA Show Online Media Center.

Below are some of the latest announcements:

To see more press releases from SEMA Show exhibitors, visit www.semashow.com/press. Find all SEMA Show news at www.semashow.com/news.

Exhibitors can upload releases to be included in the Online Media Center. For information about PR opportunities for SEMA Show exhibitors, contact Rachel Tatum at rachelt@sema.org or 909-978-6669.

Thu, 10/24/2019 - 13:43

By Rachel Tatum

Online Media Center
Members of the media can find exhibitor press releases in the SEMA Show Online Media Center.

The 2019 SEMA Show is less than two weeks away and exhibitors are sharing their latest updates for the event taking place, November 5–8, in Las Vegas. New product debuts and innovations are the center of the premier automotive trade show. Many of the announcements can be found in the SEMA Show Online Media Center.

Below are some of the latest announcements:

To see more press releases from SEMA Show exhibitors, visit www.semashow.com/press. Find all SEMA Show news at www.semashow.com/news.

Exhibitors can upload releases to be included in the Online Media Center. For information about PR opportunities for SEMA Show exhibitors, contact Rachel Tatum at rachelt@sema.org or 909-978-6669.

Thu, 10/24/2019 - 13:43

By Rachel Tatum

Online Media Center
Members of the media can find exhibitor press releases in the SEMA Show Online Media Center.

The 2019 SEMA Show is less than two weeks away and exhibitors are sharing their latest updates for the event taking place, November 5–8, in Las Vegas. New product debuts and innovations are the center of the premier automotive trade show. Many of the announcements can be found in the SEMA Show Online Media Center.

Below are some of the latest announcements:

To see more press releases from SEMA Show exhibitors, visit www.semashow.com/press. Find all SEMA Show news at www.semashow.com/news.

Exhibitors can upload releases to be included in the Online Media Center. For information about PR opportunities for SEMA Show exhibitors, contact Rachel Tatum at rachelt@sema.org or 909-978-6669.