Host Ralph Sheheen takes us to Mooresville for a tour of two top manufacturing facilities, plus a sneak peek of upcoming stops.

By Fredy Ramirez

SEMA eNews regularly collects new product press releases from companies to highlight each week. Below are this week's submissions.

Mishimoto Performance Air Intake

Mishimoto announces the release of its Performance Air Intake for the ’20+ Toyota Supra 3.0L. The kit is designed to be 17% less restrictive than the stock system and increases intake and turbo sound under aggressive acceleration.

A heatshield incorporated into the air box is engineered to protect against ambient engine bay heat. The filters are manufactured to be cleaned and reused.

877-466-4744
www.mishimoto.com
PN: MMAI-SUP-20

Magnaflow Performance Exhaust System For Jeep Wrangler

Magnaflow launches its overland performance exhaust system for the ’12–‘18 Jeep Wrangler Unlimited. The system features a stainless-steel construction throughout the entire system that is designed to withstand the toughest terrain and climate out there. The high clearance design incorporated into the exhaust is manufactured to allow for travel over difficult terrains.

Engineered to give more ground clearance over stock, the system is tucked closer up to the body. The series exhaust systems also include necessary hardware and components for a complete, bolt-on installation.

800-990-0905
www.magnaflow.com
PN: 19539 

Steele Rubber Products Toyota Land Cruiser Parts

Steele Rubber Products introduces parts for ‘63–‘19 Toyota Land Cruisers. This line includes weatherstripping and seals for doors, vent windows, liftgates, windshields, rear windows, hood to cowl, run channel, hood to radiator and other essential parts for these versatile SUVs.

800-230-8101
www.steelerubber.com
PN: Vary

Earl’s Weld-in Mounting Rings

Earl’s has released its weld-in mounting rings. The rings are designed to allow for the use of a modern in-tank EFI fuel modules in custom or modified fuel tanks.

The rings are engineered to accommodate most late-model GM, Mopar, and Ford factory fuel modules which have been standardized to a common size with a thin 6-in.-diameter hat at the top of the fuel module.

866-464-6553
www.holley.com
PN: Vary

Lakewood Cast Aluminum Bellhousing

Lakewood announces the launch of its cast aluminum bellhousings.

The housing is engineered to connect Chevy small-block and big-block, and LS engines to transmissions utilizing the standard GM pattern such as the Muncie, Saginaw, Borg Warner T10, and Tremec TKO transmissions.

All bellhousing kits come complete with clutch fork boot, inspection cover and Grade-8 mounting hardware, which are also available individually.

866-464-6553
www.holley.com
PN: Vary

TREMEC TKX 5-Speed RWD Transmission

TREMEC has released its compact 5-speed transmission TKX for upgrading classic muscle cars, ’30s-era roadster coupes or any application where space is an issue. The transmission is designed to shift smoothly at high rpm through the use of multi-cone synchronizers and hybrid synchronizer rings.

At the same time, noise, vibration and harshness (NVH) performance is engineered to be optimized with a gear layout to best control stress levels while providing structural stiffness with a ribbed, 3-piece aluminum housing. The transmission is constructed to be durable through oversized gear widths, gaskets at all flanges and caged needle bearings in all gear positions.

714-630-2764
www.mcleodracing.com
PN: Vary

Armorlite Full Floor Replacement System

Armorlite has launched its full floor replacement system for Jeep Wrangler JK 2-door models. The kit will be available in two colors—Mesa Smoke, the original matte black, along with the new Desert Khaki. Armorlite is built with three layers. The first is a proprietary marine-grade topcoat designed to provide grip, exceptional durability and water protection.

The second layer is constructed to provide structure for a factory fit, while the third is a polyester insulating layer engineered to provide substantial noise and heat reduction, while also preventing mold and mildew for instances when water finds its way in. Included in the kit is a front floor replacement, rear floor and cargo area replacement and four drain plugs.

www.goarmorlite.com
PN: Vary

DEI Pit Crew Safety Kit

Design Engineering, Inc. announces the release of its Pit Crew Safety Kit. The kit features vision, hearing and arm protection for professional mechanics, pit crew members and do-it-yourselfers.

Kits include DEI Safety Glasses, DEI Ear Plugs and DEI Kevlar Safety Sleeves.

800-264-9472
www.designengineering.com
PN: Vary

BMR Differential Bearing Kit

BMR Suspension announces the release of its differential bearing kit for the ’05–’14 Mustang. The kit is designed to minimize wheelhop and enhance rear stability.

Consisting of heavy-duty stainless-steel bearings in CNC-machined stainless-steel bearing cups, the kit is engineered to eliminate bushing deflection to reduce upper control arm deflection, rear wheel alignment changes, and excessive pinion rise.

The kit is constructed for drag racing and handling applications.

813-986-9302
www.bmrsuspension.com
PN: BK079

Roadster Shop Chassis

Roadster shop announces the release of its ’47–’54 Chevy, ’55–’59 Chevy and ’53–’56 Ford Truck chassis in both “Standard” and “Slammed” ride heights.

SPEC “Slammed” chassis are available in coilover and bagged configurations, and are designed to bolt under your classic truck with minimal mods to the existing vehicle.

847-949-7637
www.roadstershop.com
PN: Vary

By Ashley Reyes

Video of the 2020 SEMA Launch Pad competition, presented by the Young Executives Network (YEN), is now available on the SEMA Launch Pad website. Featuring exclusive footage of this year’s competitors in action, the 45-minute video includes backstage interviews and discussions with the finalists and judges.

Watch the actual pitches made by Roland Hence of FrontLane Inc., Justin Bradshaw of REVER, Eric Rivera of Dirt Dynamix, Matt Rafeld of BeachComber Offroad and Khanjan Desai of Alchemy, and listen as the judges gives each competitor feedback, and discuss the presentations among themselves. With the judges grading on how well the ideas were presented, innovation of product, and overall business plan, decide for yourself who you think had the best product.

“The process that has led them to this point has been really intense,” said Launch Pad judge Melanie White of Hellwig Products. “But you can tell there is so much passion and that’s what I love about this. All of them are solving a problem in our industry.”

White was joined by Launch Pad host Aaron Kaufman, and judges Daryl Sampson of Turn 14 Distribution, Dan Kahn of Kahn Media, Jonathan Mill of Alloy Studios and Brian Reese of The Retrofit Source.

“What I was not expecting is how conversational the questions became,” said Hence, who was selected as Launch Pad winner for his product the Impulse – Emergency Brake Light. “It really felt like we were working together to find a way to make the product and the company better. I really appreciated that and it was a great surprise.”  

Learn how the other four finalists are advancing the specialty-equipment industry, apply to pre-qualify for the 2021 competition, and sign up to receive program updates by visiting the SEMA Launch Pad website.

By Ashley Reyes

Video of the 2020 SEMA Launch Pad competition, presented by the Young Executives Network (YEN), is now available on the SEMA Launch Pad website. Featuring exclusive footage of this year’s competitors in action, the 45-minute video includes backstage interviews and discussions with the finalists and judges.

Watch the actual pitches made by Roland Hence of FrontLane Inc., Justin Bradshaw of REVER, Eric Rivera of Dirt Dynamix, Matt Rafeld of BeachComber Offroad and Khanjan Desai of Alchemy, and listen as the judges gives each competitor feedback, and discuss the presentations among themselves. With the judges grading on how well the ideas were presented, innovation of product, and overall business plan, decide for yourself who you think had the best product.

“The process that has led them to this point has been really intense,” said Launch Pad judge Melanie White of Hellwig Products. “But you can tell there is so much passion and that’s what I love about this. All of them are solving a problem in our industry.”

White was joined by Launch Pad host Aaron Kaufman, and judges Daryl Sampson of Turn 14 Distribution, Dan Kahn of Kahn Media, Jonathan Mill of Alloy Studios and Brian Reese of The Retrofit Source.

“What I was not expecting is how conversational the questions became,” said Hence, who was selected as Launch Pad winner for his product the Impulse – Emergency Brake Light. “It really felt like we were working together to find a way to make the product and the company better. I really appreciated that and it was a great surprise.”  

Learn how the other four finalists are advancing the specialty-equipment industry, apply to pre-qualify for the 2021 competition, and sign up to receive program updates by visiting the SEMA Launch Pad website.

By Ashley Reyes

Video of the 2020 SEMA Launch Pad competition, presented by the Young Executives Network (YEN), is now available on the SEMA Launch Pad website. Featuring exclusive footage of this year’s competitors in action, the 45-minute video includes backstage interviews and discussions with the finalists and judges.

Watch the actual pitches made by Roland Hence of FrontLane Inc., Justin Bradshaw of REVER, Eric Rivera of Dirt Dynamix, Matt Rafeld of BeachComber Offroad and Khanjan Desai of Alchemy, and listen as the judges gives each competitor feedback, and discuss the presentations among themselves. With the judges grading on how well the ideas were presented, innovation of product, and overall business plan, decide for yourself who you think had the best product.

“The process that has led them to this point has been really intense,” said Launch Pad judge Melanie White of Hellwig Products. “But you can tell there is so much passion and that’s what I love about this. All of them are solving a problem in our industry.”

White was joined by Launch Pad host Aaron Kaufman, and judges Daryl Sampson of Turn 14 Distribution, Dan Kahn of Kahn Media, Jonathan Mill of Alloy Studios and Brian Reese of The Retrofit Source.

“What I was not expecting is how conversational the questions became,” said Hence, who was selected as Launch Pad winner for his product the Impulse – Emergency Brake Light. “It really felt like we were working together to find a way to make the product and the company better. I really appreciated that and it was a great surprise.”  

Learn how the other four finalists are advancing the specialty-equipment industry, apply to pre-qualify for the 2021 competition, and sign up to receive program updates by visiting the SEMA Launch Pad website.

By SEMA Editors

On November 19, at 8:00 p.m. (EST), Ford will show off its hottest new rides customized for your next adventure, streaming live for 60 minutes on YouTube. The SEMA Show special event will highlight product news, project vehicle reveals, behind-the-garage-door stories with customers, celebrities and dealers and more. All are welcome to tune in.

On the following day, November 20, the event will feature 30-minute live, interactive Q&A sessions with designers, engineers, builders and drivers, and will also showcase the Bronco, Bronco Sport, F-150 and Mustang Mach-E. Sessions will take place throughout the day, and attendees will have a chance to win a VIP Experience with Ford during the 2021 SEMA Show in Las Vegas.

On Day 2, space is limited to the first 250 registrants per each Q&A session, so reserve your spot today. To get on the invitation list for one of these exclusive sessions, click here.

By SEMA Editors

On November 19, at 8:00 p.m. (EST), Ford will show off its hottest new rides customized for your next adventure, streaming live for 60 minutes on YouTube. The SEMA Show special event will highlight product news, project vehicle reveals, behind-the-garage-door stories with customers, celebrities and dealers and more. All are welcome to tune in.

On the following day, November 20, the event will feature 30-minute live, interactive Q&A sessions with designers, engineers, builders and drivers, and will also showcase the Bronco, Bronco Sport, F-150 and Mustang Mach-E. Sessions will take place throughout the day, and attendees will have a chance to win a VIP Experience with Ford during the 2021 SEMA Show in Las Vegas.

On Day 2, space is limited to the first 250 registrants per each Q&A session, so reserve your spot today. To get on the invitation list for one of these exclusive sessions, click here.

By SEMA Editors

The SEMA Data Co-op (SDC) is the largest database of specialty market product information.

Manufacturers whose products are shown here have achieved data excellence status by providing the desired product descriptions, digital assets, vehicle fitment and other sales-related facts to make it easy for retailers, jobbers and WDs to create engaging and informative product listings, giving customers confidence in their buying decision.

Products from these and other brands with rich data will be featured in future SEMA eNews issues.

ARIES RidgeStep Running Boards for ’21 Chevrolet Silverado/GMC Sierra 1500 (#2055541)

With their solid, all-steel construction, non-skid treads and durable powder coat finish, ARIES RidgeStep running boards are made for hardworking trucks and tough jobs. They feature high-strength, solid steel construction for a step that won't crack or fade over time.

This set of RidgeStep running boards fit the ’19-’21 Chevrolet Silverado 1500 and GMC Sierra 1500 crew cab, as well as the 2020 Silverado and Sierra 2500 HD and 3500 HD crew cab.

• High-strength, all-steel construction with no plastic parts
• Angular design for a tough, no-nonsense look on hardworking trucks
• Stamped steel treads for a non-skid step that will never wear or crack
• Flat profile and 6-1/2-in. width provide a comfortable step
• Textured black powder coat easily hides minor scratches and grime
• Dual-layer E-coat and powder coat finish for maximum corrosion resistance
• Welded steel end caps for a durable accent
• VersaTrac mounting system for easy installation and vehicle customization
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty, powder-coated steel mounting brackets for a solid step
• Limited lifetime warranty (three-year finish, one-year parts)

AutoMeter BEX Series Battery Chargers

Battery extenders keep your battery at full charge on a continuous basis. Batteries not kept at full charge become sulfated, whereas maintaining stored batteries at full charge maximizes battery life. The BEX series battery chargers are fully equipped with sophisticated circuitry that will safely charge and maintain batteries without overcharging.

The BEX series chargers are versatile battery chargers with a compact ruggedized composite shell that makes them safe to set and forget on all of your household vehicles. This is perfect for any motorcycle, boat, snowmobile, car, truck, RV, and lawnmower. Prevent premature battery failure with the BEX-1500, BEX-3000, or BEX-5000 from AutoMeter.

CURT Anti-Rattle Hitch Clamp (#22325)

CURT has added a new anti-rattle option to its lineup! This 2” hitch clamps help ensure a quieter ride when towing a trailer, quickly and easily clamping over the receiver hitch connection to stop rattling, vibration and noise.
This anti-rattle hitch clamp is compatible with hollow- or solid-shank accessories, and it requires zero tools for installation.

• A 2-1/2-in. shank model #22320 is also available.
• Stops rattling and prevents shank movement for a quieter ride
• Compatible with hollow and solid 2-in. shanks
• No-tool installation and easy-to-adjust clamp lever
• Constructed from high-strength steel and lightweight aluminum
• Protected by a durable, clear finish for corrosion resistance
• Limited lifetime warranty (one-year finish, one-year parts)

HushMat Sound Deadening and Thermal Insulation23)

HushMat’s ’94-’02 Dodge RAM Regular Cab Truck sound deadening and thermal insulation material is designed to make every type of vehicle cool, quiet and comfortable to drive and enjoy!  HushMat is an easy to install, USA Made material that molds, forms and adheres to your vehicle’s surface.

No tools, glues and or special equipment needed to install HushMat. Simply peel and stick. HushMat has invested thousands of hours over the past 15 years measuring vehicles to create a Year, Make and Model specific portfolio of 365,000 part numbers.  

HushMat insulates firewall, floor pan, tunnel, doors, roof and trunk. HushMat even provides installation templates to show where each piece is placed. Visit www.hushmat.com or call 913-599-2600.

LUVERNE Black Stainless Steel Side Entry Steps for 2020 Ram 1500 to 5500 (#281033-571632)

LUVERNE Side Entry Steps feature a classic, contoured design that mounts flush to the truck’s rocker panels to provide 5-1/2-in. of comfortable, non-skid stepping width while helping to protect the rocker panels against gravel spray, road debris, mud and other threats.

This set of Side Entry Steps fits the ’20 Ram 1500 to 5500 crew cab, as well as other model years.

• Contoured design with classic running board styling
• Mounts tight against the vehicle to shield rocker panels from gravel spray
• Molded, 5-1/2-in. wide, plastic step pads provide safe, comfortable entry and exit
• Powder-coated stainless steel construction for maximum corrosion resistance
• Durable, textured black powder coat for a sleek, rust-free finish
• Black plastic end caps for a bold appearance and added protection
• High-strength steel mounting brackets with a vehicle-specific fit
• Limited lifetime warranty (five-year finish, one-year parts)
• Assembled in USA

UWS 48-in. Truck Side Tool Box with Low Profile (#TBSM-48-LP)

UWS truck side tool boxes provide valuable storage and security for your items in the bed of your truck. Each box features a corrosion-resistant aluminum construction, a stainless steel locking system and a patented RigidCore foam-filled lid.

This particular truck side tool box also features a low-profile lid. It mounts low on the truck bed wall to better integrate with UWS low-profile crossover tool boxes and help maintain a clear view out the rear truck cab window.

• Mounts on the inside of the truck bed rails to provide additional storage space
• Patented RigidCore foam-filled lid to maximize strength and prevent binding
• Built lower on the bed rail to match low-profile crossover tool boxes
• 0.058-in. extra-thick, one-piece aluminum tub holds heavy tools and cargo
• Lockable, push-button operation with non-corrosive stainless steel construction
• MicroSeal gasket helps seal out moisture, dust and dirt
• Lid self-opens to nearly 90 degrees for convenient operation and loading
• Multiple box sizes available for a custom fit on each truck application
• Assembled in USA
• Limited lifetime warranty (one-year finish, one-year parts)

ZyBar 4 oz. Cast Finish (part no. 13004)

ZyBar 4 oz. Cast Finish (part no. 13004) high-temperature heat dissipation coating is designed to reduce radiant heat, reduce under hood temperatures, offers outstanding corrosion resistance, provides lasting color stability under the most extreme engine conditions and extends the life of your components. ZyBar is rated to internal temperatures well in excess of 2000 F.

ZyBar is a single component, durable polymer coating that far out performs ceramic paints, wraps and heat tapes.   

ZyBar is spray applied inside and outside the component.  ZyBar treats manifolds, headers, turbo housings, exhaust, brakes and intakes. ZyBar is a thin .001-.0025 film coating that is either oven cured (two hours at 450 F) or air cured (120 hours). Builders, jobbers, dealers and specialty coating operations interested in learning more can call our office 913-599-2600, or visit www.zycoat.com.

By SEMA Editors

The SEMA Data Co-op (SDC) is the largest database of specialty market product information.

Manufacturers whose products are shown here have achieved data excellence status by providing the desired product descriptions, digital assets, vehicle fitment and other sales-related facts to make it easy for retailers, jobbers and WDs to create engaging and informative product listings, giving customers confidence in their buying decision.

Products from these and other brands with rich data will be featured in future SEMA eNews issues.

ARIES RidgeStep Running Boards for ’21 Chevrolet Silverado/GMC Sierra 1500 (#2055541)

With their solid, all-steel construction, non-skid treads and durable powder coat finish, ARIES RidgeStep running boards are made for hardworking trucks and tough jobs. They feature high-strength, solid steel construction for a step that won't crack or fade over time.

This set of RidgeStep running boards fit the ’19-’21 Chevrolet Silverado 1500 and GMC Sierra 1500 crew cab, as well as the 2020 Silverado and Sierra 2500 HD and 3500 HD crew cab.

• High-strength, all-steel construction with no plastic parts
• Angular design for a tough, no-nonsense look on hardworking trucks
• Stamped steel treads for a non-skid step that will never wear or crack
• Flat profile and 6-1/2-in. width provide a comfortable step
• Textured black powder coat easily hides minor scratches and grime
• Dual-layer E-coat and powder coat finish for maximum corrosion resistance
• Welded steel end caps for a durable accent
• VersaTrac mounting system for easy installation and vehicle customization
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty, powder-coated steel mounting brackets for a solid step
• Limited lifetime warranty (three-year finish, one-year parts)

AutoMeter BEX Series Battery Chargers

Battery extenders keep your battery at full charge on a continuous basis. Batteries not kept at full charge become sulfated, whereas maintaining stored batteries at full charge maximizes battery life. The BEX series battery chargers are fully equipped with sophisticated circuitry that will safely charge and maintain batteries without overcharging.

The BEX series chargers are versatile battery chargers with a compact ruggedized composite shell that makes them safe to set and forget on all of your household vehicles. This is perfect for any motorcycle, boat, snowmobile, car, truck, RV, and lawnmower. Prevent premature battery failure with the BEX-1500, BEX-3000, or BEX-5000 from AutoMeter.

CURT Anti-Rattle Hitch Clamp (#22325)

CURT has added a new anti-rattle option to its lineup! This 2” hitch clamps help ensure a quieter ride when towing a trailer, quickly and easily clamping over the receiver hitch connection to stop rattling, vibration and noise.
This anti-rattle hitch clamp is compatible with hollow- or solid-shank accessories, and it requires zero tools for installation.

• A 2-1/2-in. shank model #22320 is also available.
• Stops rattling and prevents shank movement for a quieter ride
• Compatible with hollow and solid 2-in. shanks
• No-tool installation and easy-to-adjust clamp lever
• Constructed from high-strength steel and lightweight aluminum
• Protected by a durable, clear finish for corrosion resistance
• Limited lifetime warranty (one-year finish, one-year parts)

HushMat Sound Deadening and Thermal Insulation23)

HushMat’s ’94-’02 Dodge RAM Regular Cab Truck sound deadening and thermal insulation material is designed to make every type of vehicle cool, quiet and comfortable to drive and enjoy!  HushMat is an easy to install, USA Made material that molds, forms and adheres to your vehicle’s surface.

No tools, glues and or special equipment needed to install HushMat. Simply peel and stick. HushMat has invested thousands of hours over the past 15 years measuring vehicles to create a Year, Make and Model specific portfolio of 365,000 part numbers.  

HushMat insulates firewall, floor pan, tunnel, doors, roof and trunk. HushMat even provides installation templates to show where each piece is placed. Visit www.hushmat.com or call 913-599-2600.

LUVERNE Black Stainless Steel Side Entry Steps for 2020 Ram 1500 to 5500 (#281033-571632)

LUVERNE Side Entry Steps feature a classic, contoured design that mounts flush to the truck’s rocker panels to provide 5-1/2-in. of comfortable, non-skid stepping width while helping to protect the rocker panels against gravel spray, road debris, mud and other threats.

This set of Side Entry Steps fits the ’20 Ram 1500 to 5500 crew cab, as well as other model years.

• Contoured design with classic running board styling
• Mounts tight against the vehicle to shield rocker panels from gravel spray
• Molded, 5-1/2-in. wide, plastic step pads provide safe, comfortable entry and exit
• Powder-coated stainless steel construction for maximum corrosion resistance
• Durable, textured black powder coat for a sleek, rust-free finish
• Black plastic end caps for a bold appearance and added protection
• High-strength steel mounting brackets with a vehicle-specific fit
• Limited lifetime warranty (five-year finish, one-year parts)
• Assembled in USA

UWS 48-in. Truck Side Tool Box with Low Profile (#TBSM-48-LP)

UWS truck side tool boxes provide valuable storage and security for your items in the bed of your truck. Each box features a corrosion-resistant aluminum construction, a stainless steel locking system and a patented RigidCore foam-filled lid.

This particular truck side tool box also features a low-profile lid. It mounts low on the truck bed wall to better integrate with UWS low-profile crossover tool boxes and help maintain a clear view out the rear truck cab window.

• Mounts on the inside of the truck bed rails to provide additional storage space
• Patented RigidCore foam-filled lid to maximize strength and prevent binding
• Built lower on the bed rail to match low-profile crossover tool boxes
• 0.058-in. extra-thick, one-piece aluminum tub holds heavy tools and cargo
• Lockable, push-button operation with non-corrosive stainless steel construction
• MicroSeal gasket helps seal out moisture, dust and dirt
• Lid self-opens to nearly 90 degrees for convenient operation and loading
• Multiple box sizes available for a custom fit on each truck application
• Assembled in USA
• Limited lifetime warranty (one-year finish, one-year parts)

ZyBar 4 oz. Cast Finish (part no. 13004)

ZyBar 4 oz. Cast Finish (part no. 13004) high-temperature heat dissipation coating is designed to reduce radiant heat, reduce under hood temperatures, offers outstanding corrosion resistance, provides lasting color stability under the most extreme engine conditions and extends the life of your components. ZyBar is rated to internal temperatures well in excess of 2000 F.

ZyBar is a single component, durable polymer coating that far out performs ceramic paints, wraps and heat tapes.   

ZyBar is spray applied inside and outside the component.  ZyBar treats manifolds, headers, turbo housings, exhaust, brakes and intakes. ZyBar is a thin .001-.0025 film coating that is either oven cured (two hours at 450 F) or air cured (120 hours). Builders, jobbers, dealers and specialty coating operations interested in learning more can call our office 913-599-2600, or visit www.zycoat.com.

By Luis Morales

Initial CAD data for the ’21 Ford F-150 will include (but is not limited to): 4x4 suspension, exhaust, frame, steering, rear axle, dash, center stack, wheel well liners and cargo bed.

SEMA Tech Transfer has announced that CAD data for the ’21 Ford F-150 is now available.

Initial data will include (but is not limited to): 4x4 suspension, exhaust, frame, steering, rear axle, dash, center stack, wheel well liners and cargo bed.

New data will continuously be uploaded, upon release, so keep an eye on the Tech Transfer website’s “Latest Files” log, located at the bottom of the main landing page.  

For those who are already Tech Transfer members, feel free to browse through the website’s OEM CAD Repository to view all the available files. If you are not a Tech Transfer member and are interested in accessing SEMA’s 3D Scan data and OEM CAD data, contact garage@sema.org.