By Fredy Ramirez
SEMA eNews regularly collects new product press releases from companies to highlight each week. Below are this week's submissions.
Mishimoto Performance Air Intake
Mishimoto announces the release of its Performance Air Intake for the ’20+ Toyota Supra 3.0L. The kit is designed to be 17% less restrictive than the stock system and increases intake and turbo sound under aggressive acceleration.
A heatshield incorporated into the air box is engineered to protect against ambient engine bay heat. The filters are manufactured to be cleaned and reused.
877-466-4744
www.mishimoto.com
PN: MMAI-SUP-20
Magnaflow Performance Exhaust System For Jeep Wrangler
Magnaflow launches its overland performance exhaust system for the ’12–‘18 Jeep Wrangler Unlimited. The system features a stainless-steel construction throughout the entire system that is designed to withstand the toughest terrain and climate out there. The high clearance design incorporated into the exhaust is manufactured to allow for travel over difficult terrains.
Engineered to give more ground clearance over stock, the system is tucked closer up to the body. The series exhaust systems also include necessary hardware and components for a complete, bolt-on installation.
800-990-0905
www.magnaflow.com
PN: 19539
Steele Rubber Products Toyota Land Cruiser Parts
Steele Rubber Products introduces parts for ‘63–‘19 Toyota Land Cruisers. This line includes weatherstripping and seals for doors, vent windows, liftgates, windshields, rear windows, hood to cowl, run channel, hood to radiator and other essential parts for these versatile SUVs.
800-230-8101
www.steelerubber.com
PN: Vary
Earl’s Weld-in Mounting Rings
Earl’s has released its weld-in mounting rings. The rings are designed to allow for the use of a modern in-tank EFI fuel modules in custom or modified fuel tanks.
The rings are engineered to accommodate most late-model GM, Mopar, and Ford factory fuel modules which have been standardized to a common size with a thin 6-in.-diameter hat at the top of the fuel module.
866-464-6553
www.holley.com
PN: Vary
Lakewood Cast Aluminum Bellhousing
Lakewood announces the launch of its cast aluminum bellhousings.
The housing is engineered to connect Chevy small-block and big-block, and LS engines to transmissions utilizing the standard GM pattern such as the Muncie, Saginaw, Borg Warner T10, and Tremec TKO transmissions.
All bellhousing kits come complete with clutch fork boot, inspection cover and Grade-8 mounting hardware, which are also available individually.
866-464-6553
www.holley.com
PN: Vary
TREMEC TKX 5-Speed RWD Transmission
TREMEC has released its compact 5-speed transmission TKX for upgrading classic muscle cars, ’30s-era roadster coupes or any application where space is an issue. The transmission is designed to shift smoothly at high rpm through the use of multi-cone synchronizers and hybrid synchronizer rings.
At the same time, noise, vibration and harshness (NVH) performance is engineered to be optimized with a gear layout to best control stress levels while providing structural stiffness with a ribbed, 3-piece aluminum housing. The transmission is constructed to be durable through oversized gear widths, gaskets at all flanges and caged needle bearings in all gear positions.
714-630-2764
www.mcleodracing.com
PN: Vary
Armorlite Full Floor Replacement System
Armorlite has launched its full floor replacement system for Jeep Wrangler JK 2-door models. The kit will be available in two colors—Mesa Smoke, the original matte black, along with the new Desert Khaki. Armorlite is built with three layers. The first is a proprietary marine-grade topcoat designed to provide grip, exceptional durability and water protection.
The second layer is constructed to provide structure for a factory fit, while the third is a polyester insulating layer engineered to provide substantial noise and heat reduction, while also preventing mold and mildew for instances when water finds its way in. Included in the kit is a front floor replacement, rear floor and cargo area replacement and four drain plugs.
www.goarmorlite.com
PN: Vary
DEI Pit Crew Safety Kit
Design Engineering, Inc. announces the release of its Pit Crew Safety Kit. The kit features vision, hearing and arm protection for professional mechanics, pit crew members and do-it-yourselfers.
Kits include DEI Safety Glasses, DEI Ear Plugs and DEI Kevlar Safety Sleeves.
800-264-9472
www.designengineering.com
PN: Vary
BMR Differential Bearing Kit
BMR Suspension announces the release of its differential bearing kit for the ’05–’14 Mustang. The kit is designed to minimize wheelhop and enhance rear stability.
Consisting of heavy-duty stainless-steel bearings in CNC-machined stainless-steel bearing cups, the kit is engineered to eliminate bushing deflection to reduce upper control arm deflection, rear wheel alignment changes, and excessive pinion rise.
The kit is constructed for drag racing and handling applications.
813-986-9302
www.bmrsuspension.com
PN: BK079
Roadster Shop Chassis
Roadster shop announces the release of its ’47–’54 Chevy, ’55–’59 Chevy and ’53–’56 Ford Truck chassis in both “Standard” and “Slammed” ride heights.
SPEC “Slammed” chassis are available in coilover and bagged configurations, and are designed to bolt under your classic truck with minimal mods to the existing vehicle.
847-949-7637
www.roadstershop.com
PN: Vary