By Fredy Ramirez
The SEMA Data Co-op (SDC) is “data central” for hundreds of specialty parts brands, representing millions of part numbers and tens of millions of vehicle applications. Created by SEMA, the SDC is the definitive, industry-owned and -operated centralized data repository, complete with a comprehensive set of online data management tools.
The product releases below are from SEMA members who are also part of the SDC at the the Bronze, Silver, Gold or Platinum level. Learn more about the SDC at www.semadatacoop.org.
SDC members are invited to submit new-product press releases for consideration to editors@sema.org.
Hooker BlackHeart Long Tube Headers – Stainless Hooker BlackHeart introduces Long Tube Headers designed for the ’02–’04 Porsche Carrera 911/996 with (non-turbo) 3.6L engines. They are hand welded from 18-gauge 304SS and use a flange engineered to prevent warping. The hand-blended ports and tube geometry are constructed to offer excellent fit and maximum performance. Note: This product is not street-legal and may only be used on racing vehicles. Racing vehicles must be used exclusively for racing or other forms of competition. Racing vehicles must not be registered and must never be used on the street. It is illegal to install this product on a registered vehicle and use it on the street. 866-464-6553 |  |
Holley Intech Cold Air Intake Holley announces the release of its Intech cold air intake system for the ’12–’18 Jeep Wrangler JK with the 3.6L engine. The intake is designed to produce 12.8 hp and 11.6 lb.-ft. of torque on the dyno. It features a patented Slip-Seal housing-filter-tube interface manufactured to eliminate the use of hose clamps and adapters. The housing design is constructed to match the engine compartment of your vehicle. 866-464-6553 |  |
Holley Adjustable Clutch Master Cylinder Holley introduces its clutch master cylinder for the ’98–’02 Camaro and Firebird. The housing has been designed to feature the correct mounting angle for your floorboards. Inside that housing is a stainless-steel cylinder bore sleeve engineered to hold the tight tolerances needed for consistent fluid volume and pressure every time you push the clutch in. The pedal shaft is manufactured to be fully adjustable with a spherical rod end to ensure no binding during the pedal travel. The mounting hardware and detailed instructions are included. 866-464-6553 |  |
Proryde Ford Ranger Adjustable Front Lift Leveling Kit Proryde announces the release of its Adjustable Front Lift Leveling Kit for the ’19–’20 Ford Ranger. The kit is engineered to provide live on-vehicle front ride height adjustment. Seasonal on-vehicle ride-height adjustment can be made on snow-plow vehicles and other commercial front-heavy applications. The kit is manufactured to allow fender clearance for larger tire/wheel combinations and retains original OE ride quality and driving comfort. 888-813-7933 |  |
Hooker Blackheart Transmission Crossmembers Hooker Blackheart releases its LS/LT engine swap transmission crossmember for the ’67–’72 GM C10 trucks. It is designed specifically for use with Hooker Blackheart engine swap brackets and exhaust components. Three models are available, providing bolt-in installation of 4L80, TH400, 4L60E, TH350, 6L80, 700R4, and T56 transmissions. The crossmembers are engineered for maximum clearance and can allow for up to 3-in. exhaust without hanging below the frame rails. 866-464-6553 |  |
Auto Meter Tachometer Auto Meter introduces the Auto Gage 3¾-in. pedestal 0–10,000 RPM tachometer with shift light. The tachometer is engineered to be easy to read with through-the-dial incandescent lighting featuring bright, distinctly illuminated numbers. The tachometers are designed to be compatible with most 4-, 6- and 8-cylinder engines (2–4 pulse per revolution ignition signals) with points, electronic ignitions, and most 12V high-performance racing ignitions. 866-248-6356 |  |