New Products and Technology

New Products: Carbureted Fuel Modules, Nitrous Plate Systems, Aluminum Intake Manifolds and More

By Freddy Ramirez

The SEMA Data Co-op (SDC) is “data central” for hundreds of specialty parts brands, representing millions of part numbers and tens of millions of vehicle applications. Created by SEMA, the SDC is the definitive, industry-owned and -operated centralized data repository, complete with a comprehensive set of online data management tools.

The product releases below are from SEMA members who are also part of the SDC at the the Bronze, Silver, Gold or Platinum level. Learn more about the SDC at

SDC members are invited to submit new-product press releases for consideration to

Holley Sniper Die-Cast Retro-Fit Carbureted Fuel Modules

Holley announced the release of Sniper Die-Cast Retro-Fit Carbureted Fuel Modules. The modules are designed to convert factory tanks and fuel cells to an in-tank fuel system with no welding or fabrication required. The kit is engineered to fuel engines up to 900 hp, work with tanks from 6.5- to 12- in. deep and come with a die-cast pump hanger bracket to control pump vibration. The modules are similar to EFI pump modules and use a 340-LPH pump with a built-in regulator for the lower fuel pressure required by carbureted engines. The modules can be upgraded for EFI by changing the internal regulator and can be rotated a full 360 degrees.

PN 19-365

Jeep Gladiator 

Rugged Ridge Armis Bed Covers

Rugged Ridge announced the launch of its full line of Armis Truck Bed Covers for the new ’20 Jeep Gladiator pickup truck. The truck-bed covers are designed to offer Jeep Gladiator owners a broad selection of options to choose from, including soft and hard covers in a variety of roll-up and folding designs. Each product is engineered with functionality, strength and security in mind. The Armis Soft Folding Bed Cover is a contoured, low-profile folding cover constructed from aircraft-grade aluminum frame and finished with a dirt-resistant premium matte black woven fabric designed to blend seamlessly with the factory trim.

PN 13550.21
PN 13550.23
PN 13550.24

NOS Dry Nitrous Plate Systems

Holley announced the release of NOS Dry Nitrous Plate System. The system is sandwich between the top plate and bottom base plate and is designed to deliver nitrous through .125-in. passages to eight precision-machined openings. Created just for Sniper Race LS EFI Intake Manifolds, the system is designed to spray directly into the center of each cylinder designed for optimum distribution and max power. Systems come with your choice of a silver or black finish with 10 lbs., 15 lbs. or carbon-fiber bottles or as plate-only kits (no bottle). Complete kits include: the plate itself, bottle, jet holders, solenoids, solenoid brackets, stainless-steel hoses, and jetting engineered to add up to 250 hp.

PN 19-365

COMP Cams DOD Delete Kits

COMP Cams announced the release of DOD Delete Kits. The kits are designed to allow for removal of the displacement on demand/active fuel-management system on GM GenV LT1/L86/L83/LT4 engines. A standard kit includes drop-in style lifters, lifter trays, head gaskets and a head-bolt kit. The premium kits include all of these same components with the addition of exhaust gaskets, valve cover gaskets, a valley cover gasket and the cam phaser bolt, allowing for a cam swap.

PN 5562-16KIT

Comp Cams Delete Kit

TCI 6x Six-Speed Transmission Packages

TCI announced the release of 6x Six-Speed Transmission. The transmission is designed for externally balanced small block Ford 28-oz. and 50-oz. applications. The transmission is engineered to be a programmable transmission that gives you six forward gears (2.97, 2.23, 1.57, 1.18, 1.00, 0.75) for quick acceleration and increased fuel economy at cruising speeds, while still being capable of handling up to 850 hp.

PN 271701P39

Comp Cams Delete Kit 

RHS 24-Degree Aluminum Intake Manifolds

RHS announced the release of 24-Degree Aluminum Intake Manifolds for BBC applications. The intake is designed for maximum airflow and power with a 4500 Dominator-style carburetor flange. The intake is engineered to fit most 24-degree style race cylinder heads. The manifolds are available in carb and EFI versions. They feature auxiliary water ports, an integral water crossover and dual distributor hold-down pads. Ports for water lines are also provided at all four corners.

PN 11903

Jeep Gladiator