Thu, 03/06/2008 - 00:00

Despite ever-decreasing new light-truck sales, the specialty-equipment industry continues to put out a growing number of new products for these vehicles each year. Over the past three years, for example, there were 29% more products entered in the “Best New Van/Pickup/Sport-Utility Product” category within the SEMA Show's New Products Showcase.

The 2007 SEMA Show showcased 137 new products in this category, compared to the 108 and 106 entered in 2006 and 2005, respectively.

Topping the list in 2007 were suspension parts (16%), including springs, spindles and full lowering kits. Air filter kits came in second, representing 9% of new products in this category, while truck bed accessories (6%, including tie-downs, bedliners, etc.) and exhausts kits (5%) came in third and fourth. While a number of these products were designed for both pickup and SUV applications, 45% of all the products in this category were made solely for pickups, an increase from the 40% in 2006.

These vehicles continue to be a target for innovative new specialty-equipment products for a good reason: They consistently top the list of new light-trucks sold in the United States, as shown in the chart below. Despite drops in sales—a likely side effect of escalating gasoline prices—consumers demonstrate a continued need for pickups in their daily lives.
 

Source: SEMA Research & Information Center

Thu, 03/06/2008 - 00:00

Consumers are feeling a little more confident about spending money on their vehicles, according to new SEMA research data. Despite a substantial drop in January, SEMA's Performance Parts and Accessories Demand Index (PADI), a gauge of consumer interest in vehicle customization, gained 27 points (50%), jumping from 54 to 81 in February. Currently 22% of adult American drivers (more than 22 million households) intend to purchase specialty equipment in the next three months.


The charts below show both the index values (black line, values on the left of graph) and the percentage of consumers that plan to purchase specialty equipment in the next three months (blue-dashed line, values on the right of graph).

Methodology

Although similar to economic indexes, the SEMA PADI is not designed to report past activity, but rather consumer expectations of future specialty-equipment purchases. The indices track consumer plans to purchase performance parts and/or accessories within the next three months after each respective survey. This helps provide a rough forecast for demand of specialty equipment in the near future.

The PADI, and each of the three sub-indices, is a weighted composite index computed relative to its own baseline value, calculated by taking an average of January through March 2007 raw percentages. This average is then set to 100, and each month’s index is computed relative to the change from its baseline. The indices and their movements are projectable to the national market for specialty-equipment products, which consists of more than 114 million U.S. households.

SEMA has contracted with market research firm TechnoMetrica to gather the data used in building and maintaining the PADI. Each month TechnoMetrica uses a random digit dial telephone survey to collect the data in order to provide a nationally representative sample of U.S. consumers. Responses typically total between 850 and 1,000 in any given month. The margin of error is normally within the plus or minus 3%–4% range.

Although the PADI is not a precise measure of absolute future purchasing activity, it is nonetheless a tool for understanding and predicting industry sales. There are two ways of interpreting the PADI. First, its "direction," whether the index is rising or falling. Second, the values themselves provide a guide as to the degree of change in consumer expectations for purchasing industry products.

PADI In-Depth
By product segment, wheels/tires/suspension components were the most popular specialty-equipment products consumers were likely to purchase (8% or about 8 million households), followed by racing and performance products (7% or about 7 million households) and accessory/appearance products (5% or about 5 million households). Looking at how this translates to index values for each segment, wheels/tires/suspension products dipped down to 39:


Accessory/appearance products fell to 61:



 
Racing and performance jumped to a reading of 76.

Over the last three months on average, midsize cars (20%) and pickups (19%) were the most common target vehicles for personalization, followed by fullsize cars (16%) and large SUVs (13%). While it may be shocking to consider that consumers want to customize SUVs during times of rising gas prices, the increase in plans to buy performance parts coincides with the idea that these drivers desire improvements in fuel economy, which parts like air intakes, throttle bodies and tuned ECUs can offer for the SUVs purchased when gas prices drained less of their wallets.

Over the last three months on average, car dealerships and chain auto parts stores were the most popular places to buy parts and accessories (22% of consumers bought from one of the two), followed by independent parts stores (16%) and performance specialty shops (11%). Mainstream consumers still prefer to accessorize their vehicles at dealerships. In fact, sales of specialty equipment at the dealership level have grown by 11% per year on average since 2004.

When specialty-equipment buyers were asked in January what form their vehicle would take after customization, the most common answer was “general personalization” or restyling (49%), followed distantly by “restoration” (13%), “street performance” (10%) and “compact performance” (8%). One of the most common reasons consumers say they customize their vehicles is to differentiate them from the other similar ones on the road. Mainstream consumers often associate this with simply restyling their vehicle.

Several factors contribute to fluctuations in mainstream demand for specialty-equipment parts and accessories. Economic optimism improved in February, picking up 1.3 points (3%) to reach 44.5, as noted by Technometrica’s TIPP Economic Optimism Index. This monthly economic survey—sent to consumers in order to gauge their attitudes toward economic prosperity—saw a steady decline in consumer confidence in 2007, but is slowly rebounding to a more optimistic level. 

As we can see from the jumps in all three subsegments of the PADI, consumers are now feeling the itch to spend money on their vehicles. Part of this could result from consumers holding on to their vehicles longer and thinking more about enhancing the styling and performance of their aging vehicles.



Source: SEMA Research & Information Center

Thu, 03/06/2008 - 00:00

In the specialty-equipment market, we can talk about racing and performance products in a number of ways. The specialty-equipment market is broken up into nine different niches: Light Truck; Off-Road; Street Performance; Racing; Restoration; Restyling; Street Rod & Custom; Compact Performance; and Other. 

For the purposes of SEMA's Racing and Performance Report, the Street Performance and Racing niches are the most important. Each of the nine niches, however, is broken up into three categories: Specialty Accessories and Appearance Products ("Accessories"); Racing and Performance ("Performance"); and Wheels, Tires and Suspension Components ("Suspension").

For the remaining niches, we must also look at the Performance category. Combining all of this data gives us a good picture of what the aftermarket looks like for racing and performance products.
   
The following chart shows what the Racing niche has experienced in the last 13 years. The chart indicates that this niche has seen overall growth since 1993. The only year in which manufacturer sales declined was 2001. We do not have any indicators as to why the data shows this.

Most importantly, manufacturer sales have grown for each of the three segments. Racing and Performance products experienced a 102% increase from 1993 through 2006. Wheels, Tires and Suspension sales increased 101% in the same period. Finally, Appearance and Accessory products experienced a 119% increase. Each of these segments grew 6% from 2005 to 2006.  Total manufacturer sales for this niche reached $343 million in 2006.


This is just a sample of SEMA’s Racing and Performance Report which will be available on www.sema.org/research in April. The report includes data gathered from various sanctioning bodies, as well as from a survey that SEMA conducted with Foresight Research, which asked respondents about their interests in different types of racing.

Source: SEMA Research & Information Center

Thu, 03/06/2008 - 00:00

Filler for eNews

Thu, 03/06/2008 - 00:00

Filler for eNews

Thu, 02/28/2008 - 00:00

SEMA manufacturing members were given private previews of more than 25 new vehicles during 2007. The vehicles, provided by several OEMs through the SEMA Measuring Session program, were often made available to members months before they were released to the general public. Last year's sessions included vehicles from Chrysler, Ford, GM, Honda, Toyota and more.  

        

The sessions provided SEMA manufacturing members with the opportunity to gather the measurements and data needed to produce products, and access to vehicle designers, product managers and high-level executives.

That was 2007. For 2008, the SEMA OEM relations department has already conducted two Measuring Sessions and has scheduled two separate upcoming sessions with Ford for the automaker's 2009 line of E- and F-Series trucks, the all-new Flex and the Lincoln MKS. SEMA manufacturing members who would like to take advantage of the upcoming Ford Measuring Sessions are encouraged to visit www.sema.org/oem and access the 2009 Ford Measuring Session Information link underneath the Ford logo.

For more information on upcoming SEMA Measuring Sessions or additional details about the program, contact Bill Wolf at billw@sema.org or 909/396-0289, ext. 177.

Thu, 02/28/2008 - 00:00

Boyd Coddington, SEMA Hall of Famer and longtime hot-rod industry icon died Wednesday morning at the age of 63.

Recognized worldwide as an automotive designer, builder and fabricator of innovative hot rods, Coddington is credited with being the winningest custom-car builder of all time. His accolades include the prestigious Grand National Roadster Show’s America’s Most Beautiful Roadster trophy—an honor he claimed on seven separate occasions.

“Boyd was a great innovator and entrepreneur. His passion for cars has touched thousands of people and inspired what has grown into a classic American pastime,” said SEMA President and CEO Chris Kersting. “He is among the individuals who helped shape and influence SEMA. His amazing talent will continue to inspire us for many years to come.”

Coddington’s illustrious career began in his backyard garage in 1976 and flourished to include such milestones as having the only hot rod to ever be displayed in the Smithsonian Institution, and having a DuPont production paint, “Boyd Red” named in his honor. Coddington worked with other top designers, including Larry Erickson, Thom Taylor and Chip Foose who, along with Jesse James, worked in Coddington’s shop for a number of years.

A longtime contributor to charitable organizations, Coddington and his wife Jo founded the Coddington Foundation, a non-profit corporation in 2005. The Coddingtons formed the organization exclusively for charitable and educational purposes to provide terminally ill children with a chance to realize their dream of building a hot rod, which were, in turn, auctioned for charity.

In addition to his induction into the SEMA Hall of Fame in 1995, Coddington was also welcomed into the Grand National Roadster Show Hall of Fame, the Route 66 Wall of Fame and the National Rod & Custom Museum Hall of Fame, to name but a few. Hot Rod magazine voted him its “Man of the Year’ in 1988.

For more information, please click here.

Thu, 02/28/2008 - 00:00

Businessman, philanthropist and respected NASCAR driver Kyle Petty will be the featured guest at a Congressional reception in Washington, D.C., celebrating the Victory Junction Gang Camp and the American motorsports industry. Sponsored by SEMA, the reception will take place on Wednesday, May 14, 2008. 



In addition to influential SEMA members and industry leaders, among those attending the reception will be members of the Congressional Automotive Performance and Motorsports Caucus, consisting of about 100 members of Congress.  The Caucus, formed in 1996, is a coalition of federal lawmakers who are car enthusiasts themselves or have racing and performance manufacturers in their districts. Co-chaired by Senator John Ensign (R-NV) and Congressman Sander Levin (D-MI), the Caucus was created to help raise the profile of the motor-vehicle performance industry in Washington and throughout the country.   



The Victory Junction Gang Camp is a year-round camp that serves children ages seven to 15 with a variety of health issues. Located in the Piedmont Triad of North Carolina, the camp opened its doors in June 2004. Founded by Kyle and Pattie Petty in honor of their son Adam, the camp has a racing theme with the sights, sounds, look and feel of a race track. It operates solely on the donations of corporations, organizations and individuals. Through its Cares Committee, SEMA is one of many corporate sponsors of the Victory Junction Gang Camp. SEMA Cares also supports Childhelp, whose mission is to meet the physical, emotional and spiritual needs of abused and neglected children.

“SEMA members have a long history of giving back to our communities by assisting children and families who require a helping hand,” said Joel Ayres, SEMA Cares Committee chairman. “We’re thrilled to be able to use the occasion of SEMA’s Washington Rally to recognize the remarkable work being done by the Victory Junction Gang Camp, its staff, the Petty family and the many SEMA members who have contributed to this endeavor.”

Ayres is a former SEMA Board member and is the current national marketing director of the Leer Division, Truck Accessories Group (TAG) Inc.

In addition to the congressional reception, SEMA members who attend the Washington Rally will be treated to an Opening Briefing Session with United States Senator Jon Tester, meet with their members of Congress in a one-on-one setting, partake of a political insider session with well-known Washington pundits and given a tour of the United States Capitol.

For more information or to download a registration form for the Washington Rally, please go to: www.sema.org/main/semaorghome.aspx?ID=51667.

Thu, 02/28/2008 - 00:00

SEMA manufacturing members are invited to join Ford in Dearborn, Michigan, for the Ford Measuring Session featuring the 2009 Ford Flex, F-150 and Lincoln MKS. This is the event where you can gather the measurements, photos and information needed to get your products ready for when these vehicles hit the streets later this year.

The Measuring Session is scheduled for Tuesday–Thursday, April 22–24, at the Ford Conference and Event Center in Dearborn, Michigan. To register, access the writable PDF available by clicking here. The deadline to register is Friday, April 11. Photos of the vehicles are available at www.ford.com and www.fordflex.com.

For more information on this and other upcoming SEMA Measuring Sessions, contact Bill Wolf at billw@sema.org or 909/396-0289, ext. 177.

Thu, 02/28/2008 - 00:00

Filler for eNews