Thu, 01/22/2009 - 00:00


The Green Rod project, a collaboration between SEMA member companies and the association, has yielded a retrofit kit of emissions-related aftermarket parts capable of meeting 2008 California smog-check standards. The kit was tested on a mid-80's fuel-injected 5.7L Chevy small block, a descendant of the venerable 283 pictured above.

SEMA announced that a bill has been enacted into law in California to require the Department of Motor Vehicles (DMV) to develop and administer a vehicle registration amnesty program, which would be in effect from January 1, 2010, until December 31, 2010. The program would apply to vehicles that were previously registered or classified incorrectly.

Under the new law, the DMV would be required to grant amnesty from prosecution to a vehicle owner if certain conditions are met, including the owner filing a completed application with the department.
 
Over the years, California’s complex vehicle registration laws have created continued confusion among state hobbyists and those charged with applying these laws at the ground level. The result has been that certain specially constructed hobbyist vehicles (including kit cars, customs and street rods)—estimated at 70,000 by the California Attorney General—may be erroneously titled or registered.

SEMA has worked with the California State Legislature, Attorney General’s office, Bureau of Automotive Repair, DMV and Air Resources Board to find a reasonable solution that will address the interests of all parties, including enthusiasts in the hot-rod market segment, so that specially constructed vehicles can become properly registered and titled in the state. 
 
“Given the looming threat of prosecution that owners of illegally titled specially constructed vehicles were facing, our charge was to find an equitable solution that provided these owners a reasonable period of time to voluntarily retitle their vehicles and pay appropriate back taxes and fees,” said SEMA General Counsel Russ Deane.

“The remaining element of the solution involves reaching an agreement with state regulators on a process by which specially constructed vehicles that have been accepted into the amnesty program can reach achievable smog-check compliance. In addition, we must develop provisions that will accommodate new vehicles being built today for future titling and registration, specifically those that are not among the 500 vehicles annually to which California provides certain smog-check exemptions. On these issues, substantial progress has been made.”
 
In alliance with member companies and under the banner of the “Green Rod Project,” SEMA has been able to configure a "retrofit kit" of emissions-related aftermarket parts capable of meeting 2008 California smog-check standards. The retrofit kit was installed on a high-mileage '80 El Camino fitted with a '86 fuel-injected 5.7L engine. The 5. 7L 350ci displacement small-block Chevrolet V8 engine is one of the most widely used engine platforms for all types of specially constructed vehicles.

The retrofit kit consists of an aftermarket camshaft, headers, catalytic converters, a muffler, an ignition, an electronic fuel injection (EFI) throttle body intake and an EFI controller.

“Transitioning from a carbureted environment to a fuel-injected environment while utilizing the latest controller technology and emissions parts upgrades available from the specialty-equipment industry resulted in dramatic and unprecedented reductions in tailpipe and evaporative emissions on the test vehicle,” said SEMA Technical Consultant Jim McFarland, who oversaw the Green Rod Project.

“In addition, the retrofit kit actually improved performance and drivability when compared to a carbureted engine and does not limit power in the full-acceleration mode.”
 
Under California law, 500 exemption permits for specially constructed vehicles are available every year on a first-come, first-served basis. For vehicles with an exemption, a smog-test referee compares the vehicle to those of the era that the vehicle most closely resembles to determine the model year of a specially constructed vehicle.

The vehicle’s owner can choose whether the inspector will certify the vehicle model year by body type or by the engine model year. Only those emissions controls applicable to the model year and that can be reasonably accommodated by the vehicle are required. Recognizing that the demand for the exemptions greatly exceeds the supply, the SEMA Green Rod Project is seeking to provide a solution for vehicles that do not receive one of the 500 annual exemptions.  

Thu, 01/22/2009 - 00:00


Now more than ever, the specialty-equipment industry needs strong, visionary leadership. SEMA's 2009 Board of Directors Nominating Committee is asking you to identify the industry's most talented leaders and nominate them for a seat on the SEMA Board of Directors.

Take a few minutes to tell us about a potential nominee and their leadership background. Self-nominations are also welcome; often the best background and experience information comes from the source.

Nominations for the 2009 SEMA Board of Directors election are due Tuesday, January 27, 2009. Please complete the nomination form, and submit it to Nominating Committee Chairman Mitch Williams at mitchwilliams@pilotautomotive.com or liaison Christine Papavero at christinep@sema.org.

Be sure to include background information and qualifications to the Nominating Committee.

Click here to access the 2009 SEMA Board of Directors nomination form. The form is a writable PDF; please follow the instructions below to complete and return it. 

1: Place your mouse cursor over the text fields and type in your responses as required.

2: When complete, go to File and select Save As...

3: You can keep the same file name or rename it, and then save it to your computer

4: Open your e-mail program (Outlook, Yahoo! Mail, Gmail, etc.), compose an e-mail to Mitch Williams or Christine Papavero, and locate and attach the file before sending.

Thu, 01/22/2009 - 00:00

Filler for eNews

Thu, 01/22/2009 - 00:00

Learn the basics of standardized retail product eCataloging formats and sections of the data standards (Aftermarket Catalog Exchange Standard and Product Information Exchange Standard) in easy-to-understand layman’s terms during the SEMA webinar, "Business Efficiency 101: Using Product Information to Increase Sales, Boost Image and Reduce Costs".  

Sponsored by the SEMA Business Technology Committee (BTC), the webinar features presenter Scott O'Toole demonstrating the importance of accurate product eCataloging information and the problems that inaccurate information can cause for your specialty parts and accessories business.

What: "Business Efficiency 101: Using Product Information to Increase Sales, Boost Image and Reduce Costs"
When: Thursday, February 5, 2009, 10:00 a.m.–11:00 a.m. (PST)
Presenter: Scott O’Toole, Manager, Product Pricing and PIES Compliance, Motor State Distributing

Click here to register for this webinar.

SEMA's Webinar Program: The SEMA webinar program brings the world-class business seminars featured during the SEMA Show right to your desktop. Different business-building sessions are constantly added to the program, offering members the latest insight and practices from today’s leading speakers.

All SEMA webinars are conducted live and are open to all employees of SEMA-member companies free of charge. To participate, all you need is a computer with Internet access and a telephone. All previous SEMA webinars are available for download by clicking here. To view upcoming presentations that you can attend via telephone and Internet, click here.

Thu, 01/22/2009 - 00:00

Are you a recent college graduate with outstanding student loans working for a SEMA-member company? If so, SEMA can help you pay back those student loans through the SEMA Loan Forgiveness Program. In 2008, 100% of all loan forgiveness applicants received a minimum of $1,000 toward their student loans. To learn more about the qualifications and to apply online for the SEMA Loan Forgiveness Program, go to www.SEMA.org/LoanForgiveness.  

The deadline is April 1, 5:00 p.m. (PST).

The SEMA Memorial Scholarship Fund is dedicated to fostering the next generation of automotive aftermarket industry leaders and innovators.

For more information on the SEMA Loan Forgiveness Program and the SEMA Memorial Scholarship Fund, visit www.sema.org/scholarships or e-mail member@sema.org.

Thu, 01/22/2009 - 00:00

Last week’s SEMA webinar highlighted “The Specialty-Equipment Automotive Company of the Future: Guideposts for Strategic Planning” (Phase I) study prepared by the Center for Automotive Research (CAR). SEMA and CAR developed the study to provide members with guideposts or insights for business planning, whether it is strategic, tactical or operational.

The session was moderated by John Waraniak, SEMA vice president of vehicle technology, and featured speakers Brent Smith, CAR assistant director of manufacturing, engineering and technology, and Richard Wallace, CAR senior project manager.

The goal of the study was to identify vehicle-manufacturer strategies, technology trends and federal policies that will drive SEMA members into the coming decade. The study was constructed by collecting information and insight from the entities that will help shape the industry’s future—the car companies, suppliers, vehicle dealers and specialty-equipment market suppliers.

Here are some findings from the study highlighted during the session: 

  • CAR estimates that much less than 1% of the specialty-equipment market is direct to the assembly plant.
  • Less than 5% of specialty-equipment sales are through new-car dealers.
  • Vehicle manufacturers are increasingly interested in the specialty-equipment market, however, they are not sure what to make of it.
  • Most vehicle manufacturers are focusing their performance, chassis and appearance specialty-equipment strategies on small cars, specialty cars and light trucks. There is uncertainty if this would translate into other segments.
  • Vehicle manufacturers will continue to nurture in-house performance brands.
  • There is an increasing—but still somewhat limited—trend for vehicle manufacturers to design their vehicles for accessorization.
  • The traditional dealership model is changing; they can no longer rely on warranty work and vehicle sales to maintain strong revenues.
  • SEMA should offer pathways for members to establish and grow relationships with vehicle manufacturers and OE suppliers.
  • Current SEMA programs (Measuring Sessions, Technology Transfer) were highlighted as means to continue to increase the communication between vehicle manufacturers and specialty-equipment suppliers.

Most vehicle manufacturers have identified that the specialty-equipment industry can deliver products that carmakers can’t. The current economic climate and structural changes experienced by vehicle manufacturers have led to a willingness for them to go outside of the box. For example, Smith explained that vehicle manufacturers Ford and Chrysler have expressed interest in bringing specialty-equipment companies on board early in product development.

"Vehicle manufacturers are looking to create lasting relationships, and they want a way to identify specialty-equipment suppliers with interest, capability and track record to partner with," said Smith. Vehicle manufacturers indicated that one of the first steps needed to make specialty-equipment partnerships more commonplace would be to develop some form of certification as a starting point.

The webinar covers the complete findings from the study, which includes the emergence of connected-vehicle technology trends and the potential impact of the legislative and regulatory environment on the specialty-equipment industry.   

To download the audio and PDF of this webinar, visit www.sema.org/webinar.

SEMA's Webinar Program: The SEMA webinar program brings the world-class business seminars featured during the SEMA Show right to your desktop. Different business-building sessions are constantly added to the program, offering members the latest insight and practices from today’s leading speakers.

All SEMA webinars are conducted live and are open to all employees of SEMA-member companies free of charge. To participate, all you need is a computer with Internet access and a telephone. All previous SEMA webinars are available for download by clicking here. To view upcoming presentations that you can attend via telephone and Internet, click here.

Thu, 01/22/2009 - 00:00

Spy photographer Brenda Priddy says that although Chevrolet still doesn’t have any Camaro convertible pictures on its consumer sites, this pre-production ragtop recently making the rounds in Australia is a no-brainer for North America. Productions delays may bump it to a 2011 model, though.

Thu, 01/22/2009 - 00:00

Spy photographer Brenda Priddy says that although Chevrolet still doesn’t have any Camaro convertible pictures on its consumer sites, this pre-production ragtop recently making the rounds in Australia is a no-brainer for North America. Productions delays may bump it to a 2011 model, though.

Thu, 01/22/2009 - 00:00

The elections are over, and Congress intends to make changes to a health care system that has left 27 million small-business owners, employees and dependents without insurance. SEMA is working on Capitol Hill to find answers, but we need your feedback on possible solutions. 

SEMA urges you to take an electronic survey on options for improving access to health care coverage. It only takes a few minutes to complete. All responses must be received by Friday, January 30.

  • Should employer-based health care remain the model for coverage?
  • What are the best ways to reduce premium costs but maintain high quality?
  • Which tax incentives would help small businesses provide affordable coverage to workers?

Click here to take the SEMA Health Care Survey.

Thu, 01/22/2009 - 00:00

The United States Senate passed legislation to add more than 2 million acres to the National Wilderness Preservation System. The “wilderness” designation is consequential since no mechanized activity is permitted on such lands. The issue is of keen interest to off-roaders and the SEMA-member companies that market products to those groups. 

The legislation bundles more than 160 separate initiatives that had been introduced in Congress in recent years. The bill would designate wilderness in nine states and establish several new national parks, monuments and conservation areas. The House of Representatives is expected to quickly ratify the legislation and send it to President Obama for his signature.

Noteworthy areas gaining wilderness designation would include:

  • 190,000 acres in and around Joshua Tree National Park (CA)
  • 470,000 acres in the Sierra Nevada and White Mountains (CA)
  • 90,000 acres within the Sequoia and Kings Canyon National Parks (CA)
  • 210,000 acres in and around Dominguez Canyon (CO)
  • 250,000 acres within Rocky Mountain National Park (CO)
  • 517,000 acres in the Owyhee-Bruneau Canyonlands in exchange for 190,000 acres of nearby Bureau of Land Management lands for OHV recreation and other activities (ID)
  • 11,000 acres within the Pictured Rocks National Lakeshore (MI)
  • 16,000 acres for the Sabinoso wilderness (NM)
  • 130,000 acres around Mt. Hood (OR)
  • 30,000 acres in the Oregon Badlands (OR)
  • 260,000 acres in and around Zion National Park in exchange for 140,000 acres for OHV recreation and other activities, including designation of the “High Desert Off-Highway Vehicle Trail” (UT)
  • 40,000 acres in the Jefferson National Forest (VA)
  • 37,000 acres in the Monongahela National Forest (WV)

Some roads and trails were excluded from the wilderness designations and therefore remain available to the OHV enthusiast. Nevertheless, SEMA expressed concern that lawmakers were moving too quickly since not all roads and trails received protection. For more information, contact Brian Duggan at briand@sema.org.