Thu, 07/26/2007 - 00:00

The 2008 Cadillac CTS will launch in late-August with a higher level of technology, luxury and performance, says Cadillac. With many new standard features and a long list of new options, the automaker notes that the all-new 2008 CTS, Cadillac’s most affordable product, also delivers compelling value.

“Cadillac’s recent renaissance and the breakout success of the original CTS provided a springboard for our team to reach higher with the all-new 2008 CTS,” said Jim Taylor, Cadillac general manager. “The result is a car we feel is more desirable in every way, including the value it offers to luxury sport sedan buyers.”

The 2008 CTS launches in the United States in late August at a base MSRP of $32,990, including $745 dealer freight charge. (The 2007 CTS with the 3.6L V6 engine carried a base MSRP of $33,530, $540 more than the new 2008 model with the same engine.)

The all-new 2008 CTS includes the following standard features that represent significant upgrades from the prior model, including:

  • 263 hp, 3.6L engine (previously 258 hp and optional)
  • All-new redesigned cabin with handcrafted accents (previously unavailable)
  • 17-inch wheels and tires (previously optional)
  • BOSE eight-speaker sound system (previously optional)
  • The acclaimed Stabilitrak stability enhancement system (previously optional)
  • Tire-pressure monitoring (previously optional)
  • Underhood strut tower brace for improved structural rigidity (previously unavailable)
  • Polished aluminum exhaust tips (previously unavailable.)

In terms of optional equipment, the all-new 2008 CTS includes a level of new features and technologies more commonly found on more expensive luxury vehicles including:

  • 3.6L direct-injection engine with 304 hp and a 25% reduction in hydrocarbon emissions.
  • six-speed automatic transmission with driver shift control
  • all-wheel drive, with active torque transfer
  • 40 gigabyte hard-disc drive that can store audio tracks “ripped” from CDs or flash drives, and enables a “Time-Shift” feature that can pause and replay live radio content
  • Navigation system with 3D mapping of major U.S. landmarks and real-time traffic and weather data
  • USB and auxiliary ports for the seamless integration (and battery charging) of MP3 players such as iPods.
  • High Intensity Discharge headlamps with adaptive forward lighting that follows vehicle steering, with LED light pipes.
  • BOSE 5.1 Digital Surround Sound.

Source: Cadillac (July 18, 2007). “2008 Cadillac CTS Readies for Launch.” Cadillac press release.

Thu, 07/26/2007 - 00:00

Scion recently announced manufacturer’s suggested retail prices (MSRP) for its all-new 2008 xD. xD models with a manual transmission will have an MSRP of $14,550, while models with an automatic transmission will be $15,350. The xD will reach Scion dealers in early August.

Scion says that the car’s urban personality is communicated as it hugs the road with its wide stance, thick muscular body, short overhangs, accentuated wheel flares and large tires. Other styling cues that set the xD apart include a long and narrow back window, and the Scion family traits—horizontal headlamps, an integrated rectangular lower and upper grille and turn signals built into the side mirrors.

The all-new xD is powered by a 1.8L four-cylinder engine with dual Variable Valve Timing with intelligence (VVT-i), a first to the Toyota family. The xD engine produces 128 hp at 6,000 rpm and 125 lb.-ft. of torque at 4,400 rpm and comes with either a five-speed manual transmission or a four-speed automatic. The efficient 2008 xD is EPA-certified as a low-emissions vehicle. It has EPA fuel-economy ratings of 27 mpg city/33 mpg highway for the manual transmission model and 26/32 for the automatic. Starting with the 2008 model year, all estimated fuel-economy ratings will be calculated using the new EPA methodology.

Engineers designed the xD with a short, wide frame in mind for better handling and comfort, says Scion. In addition, the xD features an L-arm type MacPherson strut in the front and torsion beam suspension in the rear for increased stability and a pleasing ride.

The xD rides on 16-inch steel wheels and 195/60 R 16 tires, and stops with front ventilated disc and rear drum brakes. Customers will be able to choose from three standard wheel covers.

Inside, the simple dash features an instrument panel located directly in front of the driver while the center cluster—digital clock and HVAC and audio controls—flows down the center. The xD’s unique speedometer and tachometer have been consolidated into one circular gauge centered on the instrument panel. Indicator lamps, an LCD fuel gauge and an odometer flank the centralized gauge.

The interior of the xD was designed for convenience, utility and comfort. The xD features front bucket seats and 60/40-fold flat rear seats for a level cargo space. The rear seats can slide forward and back up to six inches for additional leg room and cargo area. In addition, they can recline ten degrees and be adjusted into five different positions.

The xD’s standard 160-watt maximum output Pioneer audio system is unique to its segment and focused on youth lifestyle as it features iPod connectivity and a mini-jack port located beneath the HVAC controls for easy access. This standard head unit integrates track, artist and album information from the iPod into a one-line display on the head unit’s screen.

The xD’s optional Premium audio system adds one more feature to the standard head unit: the ability to download “skins” to play on the organic electroluminescent (OEL) screen. Customers can download images, four-second video clips and eight-second movies from Pioneer’s website. In addition, Pioneer software allows customers to burn their own images and movies onto a CD and upload them onto the available head unit. The faceplate light also changes from deep orange to blue at the touch of a button.

The xD comes mono spec like all Scion vehicles. Customers need to choose exterior color and transmission type, while the only factory option is Vehicle Stability Control (VSC) with Traction Control (TRAC). The xD has ample standard safety features, the automaker says, including four-wheel antilock brakes (ABS) with electronic brake distribution (EBD) and brake assist (BA); driver- and front-passenger dual-stage airbags; front seat-mounted side airbags; front and rear side curtain airbags; and active headrests on driver and front passenger seating.

Scion said that it also generously equipped the xD with more upscale standard features compared to other vehicles in its segment. These features include cruise control; power steering, windows, door locks and mirrors; remote keyless entry; air conditioning; a tire-pressure monitor system; tilt steering wheel with audio controls; first-aid kit; and multi-information display. The multi-information display allows the driver to toggle between the odometer, trip meters, instant fuel economy, average fuel economy, drivable distance and average vehicle speed.

More than 40 Scion Genuine and TRD accessories will be available at launch for xD. New to the accessory line up for the 2008 model year is the Scion navigation system. The system features a 160-watt maximum power audio/video/navigation unit with seven-inch LCD touch screen. Scion's Optomize accessory program will offer the Five Axis body kit.

Source: Toyota Motor Sales, U.S.A., Inc. (July 13, 2007). “Scion Announces Pricing For All-New 2008 xD—The Third Vehicle in the Lineup.” Toyota Motor Sales, U.S.A., Inc. press release courtesy of PR Newswire.

Thu, 07/26/2007 - 00:00

Ford Motor Company and Lear Corporation will mark an automotive milestone in August when production of soy-based foam for seats begins in the 2008 model year Ford Mustang.

America’s beloved pony car will use the industry’s first soy-based flexible foam in the seat backs and seat cushions beginning in August at the Auto Alliance International factory in Flat Rock, Michigan, home of the Ford Mustang.

Ford has a rich history in incorporating soy-based materials into its products. The Model T, for example, once contained 60 pounds of soybeans in its paint and molded plastic parts. Ford again showcased its industry-leading work with soy-foams in 2003 on the Model U concept, which featured soy-based seat cushions as well as a soy-based resin composite tailgate.

“Our technical team had to overcome several significant hurdles to bring this environmentally responsible technology to production,” said Gerhard Schmidt, vice president of research & advanced engineering at Ford Motor Company. “We are pleased that our diligent efforts in developing this technology have resulted in the production of soy-foam for the Ford Mustang.”

Ford was the first automaker in the world to demonstrate that soy-based polyols could be used at high percentage levels to make foam capable of meeting or exceeding automotive requirements. In 2004, Ford and Lear formed a partnership to commercialize soy-foam applications, with initial work concentrating on the molding of headrest and armrest components.

Lear is a leader in the area of environmental systems for automotive seating with industry firsts, such as the use of expanded polypropylene and polyethylene materials. These materials are used in place of traditional polyurethane foam, which offers lower mass and is 100% recyclable.

“Using renewable resources is an important means to supplying automotive products that improve environmental impact,” said Ray Scott, senior vice president and president of Lear’s Seating Systems Division. “This also helps in reducing the amount of pollution in the production of materials for automotive use. Ford Motor Company and Lear Corporation are able to bring this product to market ahead of our competitors due largely to our collaborative work within the area of ‘Green’ technology.”

The environmental advantages of soy-foam include: a reduction of carbon dioxide (CO2) emissions when compared to current petroleum-based material, lower energy required to produce the material, up to 24% renewable content and a reduction of dependence on volatile energy markets.

Ford and Lear collaborated with the United Soybean Board—New Uses Committee (a group of 64 farmers and agriculture industry leaders), Urethane Soy Systems Company, Bayer Corporation and Renosol Corporation on soy-foam development.

“Soy is a very green, renewable resource,” says Debbie Mielewski, technical leader for Ford’s Materials Research & Advanced Engineering Department. “Using soy-based foam gives us the opportunity to conserve natural resources and reduce our environmental footprint.”

Most automotive manufacturers today use 100% petroleum-based polyol foam. Each vehicle produced today contains an average of 30 pounds of petroleum-based foam. The total annual worldwide market for the foam is 9 billion pounds. Mielewski says auto manufacturers' research and development of renewable, more environment-friendly materials to produce the foam could have a significant environmental impact.

Source: Lear Corporation (July 12, 2007). “Ford, Lear to Launch Industry’s First Soy-Based Seat Foam in 2008 Ford Mustang.” Lear Corporation press release courtesy of PR Newswire.

Thu, 07/26/2007 - 00:00

Whether you contact your prospects via direct mail, print advertising, e-mail, sales calls, podcasts...no matter how you contact them, it’s important that you contact them frequently, according to a recent article by Larry Merserearu—small business consultant, speaker and author in the field of marketing and promotion.

Your prospects are inundated with promotional messages. Estimates have run from 200 to over 1,000 messages per day. Even at the low end, you are competing with at least 200 pitches a day. If it’s been three months since your prospect has heard from you in some form and your competition has been in their face a dozen times in the mean time, who do you think will come to mind first if they’re ready to buy?

Larry Merserearu believes that prospects have to receive a message from you at least once a month through the year just to keep your name in their cerebral database. Just because you mail them a postcard every month, don’t assume they received the message each time. Just because you ran a monthly ad in a trade publication they’re likely to read, don’t assume they saw it every month. Now, if you run that ad and mail that postcard, odds are pretty good that they caught your message at least once. And if they saw both, it’s that much better.

What if you ran the ad, sent a postcard and sent an e-mail? How about a weekly email? Now the odds are really in your favor. The message: Don’t rely on one medium to do all of the work. Gatekeepers sometimes throw direct-mail pieces away. People don’t read their trade magazines absolutely every month...and don’t read absolutely every page when they do. E-mail is easy to delete or “unsubscribe,” or worse: “block sender.” But if you’re hitting them with three or four different media, you’re going to be hard to miss.

For those of you who sell products that are seasonal, or that fall into specific cycles, it’s important to maintain contact all year. Don’t let your name fade from memory. Then in the weeks leading up to the buying season, intensify the contacts. Increase the ad size. Mail more frequently. When it’s time to make the buying decision, you’ll have that “top-of-mind” awareness we all hope for.

Don’t let up during your slow times or off-season. If you let them forget about you, you have to start all over again when the “season” rolls around. You make life difficult for your sales people when they have to remind prospects who you are and what you can do for them every time they call!

However, there is such a thing as too much contact, says Larry Merserearu. It’s especially true if you contact people by telephone. There’s a fine line between “persistent” and “pain in the butt.” In print, broadcast or in the mail, there’s a point where you’ve done enough and to continue to rack up contacts would be a waste of money. Overkill can even be damaging.

Let’s talk about telephone first. If you’re trying to reach a prospect you’ve never spoken to before, you should never call more than once a week. They may have been out of town the first time, or just not ready to talk. Or, the worst scenario: they don’t know who you are. If they don’t know who you are, you have to do more marketing.

The next question is, “How many weeks do I keep trying?” The old wisdom was that people said “no” four or more times before they said “yes.” And the same old wisdom said that most sales people quit trying after two or three calls. After leaving five or six messages, it’s easy to get discouraged. At that point, Larry suggests that it’s time to look for a new contact in the organization.

Larry says that he always tries to enter at the highest level possible. For him, the ideal contact is the vice president of sales and/or marketing. If he can’t get to first base with them, he’ll try to talk with their assistant. If he can’t get to first base there, he’ll drop down to a marketing or sales director or manager. (Yes, a director or manager is a step DOWN from the vice president’s assistant.) The mission changes when you drop down a level: Now you’re trying to get someone to be your advocate and get you in to the vice president.

The assistant and the director probably don’t have buying authority, so don’t waste your breath trying to make the sale. You have to make them understand how much you can do for the vice president, and how important it is for you to get to talk to them...and what a hero they’ll be for putting you through.

In advertising and promotion, anything more than about two contacts a week is overkill. Again, that doesn’t mean you shouldn’t advertise or mail more often than that. They won’t see you every time. But there is a point where they are seeing you often enough to know you and love you. Surely you’ve seen TV ads that got really old after about a dozen exposures. It may have been effective the first few times. But it can start to wear on you after a while. Don’t waste precious resources on overkill.

Source: Larry Mersereau (July 3, 2007). How Often?. “Bringing In More Business…”(electronic newsletter); Larry Mersereau (July 10, 2007). How Often? Part 2. “Bringing In More Business…”(electronic newsletter)
 

Thu, 07/26/2007 - 00:00

The U.S. Department of Commerce is sponsoring a webinar on the emerging automotive markets in China, which will take place on Thursday, August 2, 2007, at 7 p.m. (EST). This webinar will focus on the tremendous automotive market opportunities outside of primary cities such as Shanghai and Beijing, and Guangzhou, and instead looks to second-tier markets such as Chongqing, Xiamen, Nanjing, and Dalian, for example.

The program is intended to educate your automotive clients on these emerging, dynamic markets, why they are critical to long-term market penetration plans and how to best approach these markets. As a co-sponsor of the event, SEMA members are offered a special rate of $35 to participate. As part of the registration fee, participants receive a brief report on the automotive components sector in China’s second-tier cities. Recently completed by the U.S. Commercial Service in China, this market research report will not be released to the general public until January 2008, but will be provided to you at the time of registration.  For more information http://www.buyusa.gov/auto/china_webinar.html.  

Thu, 07/19/2007 - 00:00

Attention SEMA Show exhibitors: The 2007 SEMA Show Exhibitor Services Manual (ESM) is set to start hitting exhibitor mailboxes this week. The SEMA Show ESM contains all of the information that an exhibitor needs to prepare for and plan a meaningful and profitable SEMA Show experience. Not only does the ESM keep exhibitors on track with key deadlines and Show information, there are also many promotional and product-exposure opportunities available. Some of these include:

  • The Products for Project-Vehicle Builders List
    The sign-up sheet for the very popular Products for Project-Vehicle List is included in the ESM. Looking to grab some extended play for your products both during and after the 2007 SEMA Show? Fill out the form, fax it in and let builders know what you have available for their SEMA Show project buildups.

  • 2007 SEMA Show Internship Program
    The 2007 SEMA Show Internship Program does more than provide students with valuable learning experiences. It offers principals of SEMA-member companies and SEMA Show exhibitors with an excellent opportunity to serve as positive role models and observe qualified, dependable and productive potential employees.

  • Technical Seminars
    Exhibitors are invited to promote and demonstrate the technical applications of their products by conducting seminars at the SEMA Show. Technical seminars will be promoted on the SEMA Show website (www.SEMAshow.com) and will be include in on-site promotions.

Note: Information on the programs listed above and additional exhibitor opportunities are outlined in the SEMA Show ESM under tab eight.

The 2007 SEMA Show is set for Tuesday–Friday, October 30–November 2, in Las Vegas. Show information and registration is available online at www.SEMAshow.com.

Thu, 07/19/2007 - 00:00

Alcoa, the world's largest producer of aluminum and key industry manufacturer of electrical distribution systems for vehicles, joins DUB Magazine, Hot Wheels and Advanstar as title and presenting sponsors of the SEMA Installation Banquet and Gala Fundraiser.

Additional important details concerning the event, to be held July 27, 2007 at the Hyatt Regency Irvine in Irvine, California, include:

-Dress for the event is cocktail attire or black-tie optional. The reception begins at 6:30 p.m., with dinner and program to follow at 7:30.

-Space is still available for Friday afternoon’s shopping excursion to nearby Fashion Island in Newport Beach. Transportation will be provided to and from Fashion Island, with a shuttle bus departing from the front of the Hyatt Regency Irvine Hotel at 9:30 a.m. With sweeping views of the Pacific Ocean, Fashion Island features retailers like Bloomingdales, Neiman-Marcus, and Macy’s, as well as specialties including French furnisher Ligne Roset, Restoration Hardware, Indigo Palms and noted men’s fashion and tailor, Gary’s.

-Limited slots are still available for the Council Cup – Cash for Kids charity golf tournament. Reserve your spot now! Transportation will be provided from the Hyatt Regency to Strawberry Farms. Buses will depart from in front of the hotel at 6:30am sharp!

-Space is limited, but we are still accepting banquet sponsorships. If you would like to be a part of this event, please contact Arlene Wood (909/396-0289 x110; arlenew@sema.org) to make your banquet reservations or click here

For additional details, please visit the Installation Banquet and Gala Fundraiser website here

 

Thu, 07/19/2007 - 00:00

NASCAR event packages, tickets to "O" at the Bellagio, a new Cannondale Cyclocross road bike and a new 2008 Harley-Davidson Softail Fat Boy, donated by H-D, Vance & Hines and COMP Performance, are among the great items up for bid at the SEMA Installation Banquet & Gala Fundraiser.

In addition to its charity golf tournament, the SEMA Installation Banquet & Gala Fundraiser supported by DUB magazine and Hot Wheels presented by Advanstar will feature a silent auction to benefit the Petty Victory Junction Gang Camp and Childhelp children's charities. Other items on offer include exotic resort and cruise vacations, one-of-a-kind prints and photography, performance driving-school certificates and NASCAR collectibles.

The Gala Auction begins at 6 p.m., Friday, July 27, at the Hyatt Regency Irvine in Irvine, California.

If you would like to donate an item for the Silent Auction, please visit: http://www.sema.org/images/pdf/gala_silent_auction.pdf.

More exciting auction items are being added daily. Stay tuned to your weekly eNews update to view the latest additions to the auction lineup.


Items currently entered in the Gala Auction:

2008 Harley-Davidson Softail Fat Boy motorcycle, donated by Harley-Davidson, Vance & Hines and COMP Performance



Cannondale Cyclocross special edition road bicycle, donated by Cannondale (bike shown is only an example of Cyclocross series)




Two-night stay for (2) couples at Cibolo Creek Ranch, near Big Bend National Park, Texas, donated by Cibolo Creek Ranch


Jeff Gordon-signed mini hood, donated by Joel Ayres

 

'32 75th Anniversary Roadster Pedal Car, donated by Warehouse 36


Framed watercolor print “Caravan Stop," donated by Dana Forrester Automotive Art


RR-56 Brute Race Ramps, donated by Brute Industries


The Shadow, Volumes 1–8, with original art, covers and illustrations, donated by Nostalgia Ventures



Skateboard hand-painted with SEMA logo


How to Wire Your Hot Rod, autographed and donated by author Dennis Overholser


NASCAR jacket (size XXL), donated by Dennis Overholser



Large Giclee canvas piece by Bruce Kaiser, donated by Hot Rod Heritage


Tony Stewart autographed side panel, donated by Victory Junction Gang Camp


Full-page ad in Restyling Magazine, donated by Restyling Magazine


Tour of the National Corvette Museum, Bowling Green, Kentucky donated by Carl Sheffer


Garmin Nuvi 350 Personal Travel Assistant GPS receiver, donated by Lokar Performance Products



2007 Master’s Pin Flag signed by Fuzzy Zoeller donated by Tommy Daniels





2007 Master’s Pin Flag signed by Ben Crenshaw donated by Tommy Daniels


Framed photo of the 12th hole, Master’s Tournament, Augusta, Georgia, donated by Tommy Daniels


 

Framed photo of the 13th hole, Master’s Tournament, Augusta, Georgia, donated by Tommy Daniels


2008 SummitRacing.com NHRA Nationals VIP Package, including air, hotel, tickets and parking for two, donated by Summit Racing Equipment


Philip Stein ladies watch donated by Diane and Peter MacGillivray

 

Kyle Petty’s 2006 Charity Ride jacket, donated by Jeff Kelderman, Kelderman Air Ride


 

Three certificates for two-day Grand Prix Specialty Driving Course at Bob Bondurant’s School of Performance, donated by Ira Gabriel, Primedia.


“Backstage” Dinner for 10 at the 2007 SEMA Show Industry Banquet



Get Your Empties First at the 2007 SEMA Show certificate (Mobile Electronics, Racing & Performance hall, Wheel & Tire hall)


VIP Parking at the 2007 SEMA Show certificate (2)


 

Marriott gift basket certificate, donated by Experient

$500 towards a reception in a SEMA Show booth, donated by Aramark




-Two tickets to “O” at the Bellagio, donated by the Bellagio Hotel & Casino

-Audio/visual services to be provided in a booth/meeting room at the 2007 SEMA Show, donated by AVW-Telav

-’32 Ford Deuce book signed and donated by author Tony Thacker

-Front wheel from former BAR Honda Formula 1 car donated by Tony Thacker

-Vintage-style NHRA tin sign autographed by Wally Parks, donated by the Wally Parks NHRA Motorsports Museum

-Vintage-style tin sign for Wally’s Fuel & Gas autographed by Wally Parks, donated by the Wally Parks NHRA Motorsports Museum

-Vintage-style NHRA wool jacket autographed by Wally Parks, donated by the Wally Parks NHRA Motorsports Museum

-COGApa Automotive PA Systems (2 pieces), donated by COGApa

-Deluxe Kreepstool AT (aluminum frame deluxe rolling stool), donated by 4Teck

-Philip Stein Tesler Technology Ladies Watch donated by Anne Johnson

-Signed print of Chili’s Little Deuce Coupe

-Barrett-Jackson Fundraiser and Auction tickets, donated by Childhelp

-(2) Power Wheels Ford Mustang, donated by Mattel

-NASCAR Nextel Cup package and NASCAR Family Album, donated by NASCAR

-Richard Petty Shadow Box, donated by Victory Junction Gang Camp

-Kyle Petty-signed Hot Wheels print

-Richard and Kyle Petty-signed Victory Junction Gang Camp race helmet, donated by Victory Junction Gang Camp

-Bobby Labonte-signed leather jacket, donated by Victory Junction

-Tony Stewart-signed side panel, donated by Victory Junction

-Kevin Harvick-signed diecast, donated by Victory Junction

-Watch from JCK/Peter Frigeri-Expoease

-Artwork, four pictures framed, donated by Childhelp

-Limited edition Giclee print "Hurryin Back" w/ laser-etched plaque, donated by Dwayne Vance

-Limited edition Giclee print "Mission Over," donated by Dwayne Vance

-Maui Jim sunglasses (non-prescription), donated by Joel Ayres

-(2) domestic round-trip airline tickets on United Airlines (blackout dates apply), donated by Experient

-Seven-day Mexican Riviera cruise with a balcony room. Ports of call include Puerto Vallarta, Mazatlan and Cabo San Lucas (departs 9/30/07), donated by Patrick Judge, Keystone Automotive Operations


3-day/2-night deluxe accommodations at the Mirage Hotel, Las Vegas, donated by the Mirage Hotel




3-day/2-night deluxe accommodations at Planet Hollywood Hotel & Casino, Las Vegas, donated by Planet Hollywood


3-day/2-night one-bedroom suite at the Hilton Grand, Las Vegas Strip, donated by Hilton Grand Vacations Las Vegas


3-day/2-night MGM Grand and Signature package including bungalow suite accommodations, limo transfer between airport and hotel and two tickets to Cirque Du Soliel’s “KA,” donated by MGM Grand Hotel and Casino


3-day/2-night package at the Las Vegas Hilton, including deluxe room and dinner for two at Benihana Village, donated by the Las Vegas Hilton



3-day/2-night stay at Circus Circus, donated by Circus Circus



3-day/2-night stay at Excalibur Hotel and two tickets to "Tournament of Kings" show, donated by Excalibur



2-night VIP accommodations at the Westin Casuarina, donated by the Westin Casuarina



3-day/2-night stay at Hooter’s Casino, including deluxe room and dinner for two at Hooter’s restaurant, donated by Hooters Casino Hotel



-3-day/2 night Imperial Palace package, including free bottle of champagne, "Legends" concert tickets w/one cocktail, Emperor’s Buffet and admission to IP Auto Collection, donated by Imperial Palace

-3-day/2 night stay at Sahara Hotel and dinner for two at Paco’s Mexican restaurant, donated by Sahara Hotel & Casino

More exciting auction items are being added daily. Stay tuned to your weekly eNews update to view the latest additions to the auction lineup.



Thu, 07/19/2007 - 00:00

SEMA manufacturing members are invited to get an up-close preview of the new 2008 Ford Focus coupe and sedan at an exclusive members-only July 24 measuring session in Diamond Bar, California. This is a California measuring session only, and cameras ARE permitted. The deadline to register is Friday, July 20.

To participate, e-mail a response with name(s), company name, address, phone and e-mail address(es) to: measuringsession@sema.org.

Location   
AAA - Southern California
Auto Research & Inspection Center
1577 S. Valley Vista Dr.
Diamond Bar, CA 91765
(next door to SEMA headquarters)        

Date and Time
Tuesday, July 24
8 a.m.–4 p.m.

Questions? Contact Bill Wolf at 909/396-0289, ext. 177; or Sandy Conolly at 909/396-0289, ext. 155.

More info is available from SEMA’s OEM department by visiting: www.sema.org/oem.

Thu, 07/19/2007 - 00:00

John Waraniak, SEMA vice president of vehicle technology, will join Brett Smith, assistant director of manufacturing, engineering and technology for the Center for Automotive Research; Nancy Philippart, executive director of GM Accessories Business Channel of General Motors Corp.; Michael Chetcuti, CEO of Quality Metalcraft Inc. and principal for Streetcar USA; Mike O’Brien, corporate manager product planning for Toyota Motor Sales USA; Beau Boeckmann, president for Galpin Auto Sports and vice president for Galpin Motors; and George Dettloff, CEO and president for SKF North America; Dave Yegge, operations manager, American Expedition Vehicles; Larry Conville, industry & public relations manager, Skyjacker Suspensions; and Steve Irby, founder and president, Kicker Car Audio to present “Designing for Customization” during the 2007 Management Briefing Seminars, set for August 6–10, at the Grand Traverse Resort in Traverse City, Michigan.

The session, “Designing for Customization,” organized by Waraniak and Smith and supported by SEMA, will provide insight about how leading companies are applying design for customization and accessorization (DFC/A) to meet the increasing demand for differentiation, while maintaining high-volume profitability.

As OEMs are looking for products, processes and partners to help them create and launch the most accessory-friendly vehicles for fragmenting markets—in order to drive increased profits—the future of aftermarket suppliers is all about the micro-niche delivering, fully integrated customization while significantly reducing capital investment for tooling and time to profit. However, it takes a new manufacturing, marketing and production mind-set to make it work.

“Designing for Customization,” will include presentations and a panel discussion from OEMs and SEMA suppliers that highlight how successful programs achieve this balance and will present a forum for the OEMs to showcase some of their more creative programs to the traditional suppliers and automotive press community. SEMA-member companies participating in the session include Kicker, Quality Metalcraft Inc., Skyjacker and SKF; OEMs include Toyota and General Motors.

Key points that will be included and reinforced with examples from presenters are:

  • Speed to market and profit with the right formula is essential to successfully delivering high-demand vehicles, modules and systems.
  • Leveraging the creativity of suppliers with strong brands and authentically sharing brand equity and identity as the vehicles come to market is critical.

This session and others will be featured in the annual 2007 Management Briefing Seminars, a week of educational sessions and networking with high-level executives from the automotive industry. For complete information and a list of additional confirmed participants, visit http://www.cargroup.org.