Fri, 05/01/2009 - 14:55

SEMA News - May 2009

SEMA LEGISLATIVE AND TECHNICAL AFFAIRS

By Jim McFarland

Solving the Compliance Equation

SEMA Paves the Way for Meeting Emissions Requirements With Updated Black Book

 Solving the Compliance Equation

SEMA General Counsel, Russ Deane, with Bob Burch (right) looking on, provided information about the CARB Executive Order (E.O.) program during its early stages of development and application in the ’80s…as he does today. 

While it may be difficult to accurately trace the first time one man elected to compete against another or even exhibited a desire to be individually different, such is not the case regarding his pursuit of high-performance cars.

In fact, history has recorded that it was on the post-World War II dry lakes of Southern California and makeshift dragstrips of the same era that the specialty-equipment industry we know today began to take root. Over time, as racers and performance enthusiasts sought to expand their modification practices to include the building of parts for their friends and fellow competitors, efforts such as those by Vic Edelbrock Sr. to help develop a parts warehousing system were fertilized by work to create a distribution path that evolved into the core method practiced today.

In the Beginning…

Of course, with growth comes accountability. Recognizing the need for a unification of purpose and ways to build and sustain their businesses, a pioneering group of high-performance parts manufacturers banded together to form the Speed Equipment Manufacturers Association. It was 1963.

As SEMA and the industry grew and the since-renamed Specialty Equipment Market Association’s impact on the automotive landscape became more visible, it was only a matter of time until its members fell under the mandates of governmental laws and regulations, particularly those of an environmental nature. Perhaps, the first such encounter occurred in the fall of 1966, when a small number of specialty-equipment manufacturers met in downtown Los Angeles with a person later to become an ally of the industry. His name was Eric Grant. At the time, Grant represented a governmental agency that evolved into the California

Air Resources Board (CARB). In no uncertain terms, Grant outlined concerns about how the specialty-equipment industry needed to be regulated and held responsible for the potentially emissions-related modifications such components enabled. He also discussed compliance requirements.

Further, Grant indicated that the engine-component design limits to which OEMs were producing performance engines for the era’s musclecars would be the initial “standards” by which specialty parts would be evaluated (e.g., no testing required; just certain dimensional parameters met). His statements were both alarming and reassuring. These are vivid recollections because I attended that meeting along with others who included Willie Garner, Harry Weber, Bob Wyman, Vic Edelbrock Jr., Paul Schiefer, Els Lohn, Ed Iskenderian, Fred Offenhauser and Ray Brock. Brock and I were there representing Hot Rod magazine and Petersen Publishing Company, principally because of Hot Rod’s vast performance enthusiast readership that eventually stood to be affected by the meeting’s outcome.

Becoming More Responsible

 Solving the Compliance Equation

“I recall thinking that unless SEMA took a proactive position concerning emissions, sound and safety, we stood to become regulated without an opportunity to be a part of the regulatory process that was establishing the rules for compliance.” —Vic Edelbrock Jr.

Fast-forward to the first SEMA presidency term of Vic Edelbrock Jr. It was 1970, and Bob Petersen (Petersen Publishing Company) had been instrumental in supporting SEMA’s need for representation in

Washington, D.C. He had provided financial aid to help establish this service, and Edelbrock formed the first group of committees dealing with environmental issues. One of these addressed emissions regulations.

“I recall thinking that unless SEMA took a proactive position concerning emissions, sound and safety, we stood to become regulated without an opportunity to be a part of the regulatory process that was establishing the rules for compliance,” Edelbrock said. “The emissions committee I formed was intended to not only consider issues I felt would be of concern to the membership, but to inform governmental people not familiar with our industry of what we were all about. There was also a PR factor because of a perception outside our industry that we were operating in barns with dirt floors, and that was obviously not the case at all. Looking back, those committees were the beginning of the industry’s efforts to address regulatory issues in a realistic and practical way. Today, the need to continue this type effort is even stronger.”

In time, environmental concerns about emissions-related aftermarket components became more prevalent, and it wasn’t long until the Environmental Protection Agency (EPA) recognized that the specialty-parts industry came under scrutiny of the federal Clean Air Act—specifically, its anti-tampering provisions. Other automotive trade associations were facing similar issues. And since many of these groups had individually approached the EPA for dispute resolutions and ways to conform to environmental rules, the agency requested a unified voice to be formed to avoid multiple agendas.

As a result, the Automotive Liaison Council (ALC) was created, and SEMA became a member along with the Motor Equipment Manufacturers Association (MEMA), the Automotive Parts Rebuilders Association (APRA) and other related associations. Soon, however, it was apparent that the needs and objectives of specialty-parts manufacturers differed from those in the more traditional automotive aftermarket, so SEMA withdrew from the ALC and set out on its own to address regulatory problems specific to its membership. By so doing, SEMA broadened its visibility and exposure on the regulatory landscape while increasing its resolve to find ways of helping members meet growing and challenging environmental requirements.

SEMA Provides Further Aid to Its Membership

All the while, the SEMA Emissions Committee was attempting to marshal interest and participation on behalf of manufacturers that were building and selling emissions-related parts. This same small group of committee members was also dealing with what had become CARB, an agency increasing its familiarity with and concerns about certain specialty parts. As a result of this concern and because no methods existed for compliance with California’s own emissions anti-tampering requirements, SEMA set about to create and implement what became known as the CARB Executive Order (EO) program.

“In retrospect, during the ’70s and ’80s, we found that the CARB was becoming increasingly aggressive in the enforcement of Section 27156 of the California Motor Vehicle Code [anti-tampering provisions],” said SEMA General Counsel Russ Deane. “This section precludes the sales of products that modify the emissions control systems or performance of vehicles equipped with specialty parts, unless exempted by CARB. At the time, there was no procedure to obtain such an exemption; therefore, none of these type of parts were legal for sale in California.

“In addition, with the advent of ‘cease and desist’ orders then being issued by CARB, it was critical that we find a way to bring our products into compliance with the regulations. However, we first needed regulations to which we could comply. After some time and discussions with CARB staff, SEMA was able to develop a program that allowed parts manufacturers to obtain CARB approval for products by a method that minimized levels of testing, provided reasonable testing criteria and limited the amount of administrative paperwork. This became the Executive Order certification program that we enjoy today.

“Was the development of this program worth SEMA’s investment of time and resources? A quick look at the current state of our industry would seem to answer this question in the affirmative,” furthered Deane.

As the CARB EO process began filtering into industry compliance practices—and in the interest of helping its members address emissions regulations—SEMA initiated a program to enable the voluntary identification and marking of emissions-related products. Bob Keller, now retired from Turbonetics, was an active participant in that project.

“At the time, there was concern that SEMA members selling emissions-related parts were unsure about their legality in California, so we began discussing an ‘emissions identification program’ for which we ultimately got the approval of both the EPA and CARB,” Keller recalled. “It might have been considered our version of a voluntary self-certification program, where parts manufacturers used colored stickers on packaging that identified the compliance status of their products. The program was effective, although in time there seemed to be a lack of participation within the SEMA membership, and the program became less effective.”

The Black Book Is Created

 SEMA NEWS-MAY 2009-SOLVING THE COMPLIANCE EQUATION

Recent updates to the Black Book, including formatting for online use, were designed to further simplify the overall emissions compliance process. The Black Book is available on www.sema.org/black-book

This chronology of selected events clearly reveals how SEMA has historically laid a path to provide its members with ways to successfully confront unavoidable environmental compliance issues. Included in those efforts, the association also compiled a collection of materials intended to inform, direct and explain the steps necessary to meet CARB and EPA compliance requirements.

Bob Burch and Frank Bohanan, then SEMA’s technical affairs gurus, combined their experiences to collect and format the complex body of information that contained the compliance process.

“I remember that our objective was to carve a path through the jungle of governmental language,” Bohanan said. “Both CARB and the EPA had information out there, but it was pretty much unusable. Our job was to take whatever was available and put it into a form that made sense and could be used by SEMA members.”

Titled the Black Book, this publication initially became available to SEMA members in the early ’90s. Recent updates, including formatting for online use, were designed to further simplify the overall emissions compliance process. SEMA President and CEO Chris Kersting was then and remains involved in how the association assists its membership with regulatory and compliance-related issues.

“Looking back on that time, it’s as important now as then that our industry be keenly aware of the responsibilities that come with regulations,” Kersting said. “We were afforded an opportunity to demonstrate that SEMA members deserved a chance to continue in business with these types of parts if we could be compliant. What I have concerns about today is that we cannot afford to become complacent as an industry and allow ourselves to fall behind in becoming and remaining compliant with certain parts. We have a place at the table with the regulators and legislators based on the credibility we’ve been able to establish by meeting compliance requirements through the EO program. It’s critical that we continue to take advantage of this credibility as an industry by utilizing the ongoing certification opportunities we’ve provided our membership. If we fail to take that advantage, the consequences are far more onerous than any perceived problems with becoming compliant; we destroy our credibility and literally lose our place at the table. The newest version of the Black Book is SEMA’s most recent effort to provide a path for achieving compliance status and avoiding unwanted consequences.”

Going forward, SEMA continues to monitor information and activities that point to potential regulatory problems and their solutions. SEMA strives diligently on behalf of its membership to provide the most accurate and up-to-date information available pertaining to emissions compliance-related issues. The Black Book takes into account fpecific compliance procedures, shares answers to questions dealing with the process, provides marketing guidelines and reveals ways to help keep testing costs to a minimum. At a time when it appears that the intensity of governmental regulations may be increasing, it’s critically important to recognize and utilize the services SEMA provides its members in addressing these issues.

Provided to SEMA members, the Black Book is available on www.sema.org/black-book. The information is designed and presented to provide a clear path to obtaining CARB and EPA compliance for emissions-related specialty aftermarket components and systems. If you are a manufacturer of emissions-related specialty parts, it will be an investment of time well spent.

Fri, 05/01/2009 - 14:55

SEMA News - May 2009

SEMA LEGISLATIVE AND TECHNICAL AFFAIRS

SEMA Confronts Cash for Clunker Myths in Europe and Prepares for Second Scrappage Battle in U.S. Congress

SEMA News-May 2009-SEMA Confronts Cash for Clunker MythsSEMA launched the largest grassroots effort in its 46-year history earlier this year to keep a national “Cash for Clunkers” program out of the $787 billion economic stimulus bill. The campaign was a success. Nevertheless, some lawmakers remain committed to using a vehicle scrappage program as a means to spur new-car sales.

They are now citing a flawed German program as a model for America.

Cash for Clunkers programs accelerate the normal retirement of vehicles through the purchase of older cars, which are then typically crushed into blocks of scrap metal. Under the German program, the government is offering consumers 2,500 euros (about $3,400 USD) toward the purchase of a new car regardless of the CO2 emissions of the new model, so long as the scrapped vehicle is at least nine years old. The program also permits German consumers to replace a more fuel-efficient older car with a less-efficient newer model.

Like the U.S. proposals, the European-style programs do not stand up to scrutiny. In fact, European Commission (EC) staff warned that the programs focus on age rather than actual emissions; that the cars collected may simply be resold in other countries; and that the scrapped cars were at the end of their useful lives anyway and worth far less than the subsidy.

Both the EC staff and the European Federation for Transport and the Environment have urged Germany and other countries to abandon scrappage subsidy payments, since they do more environmental harm than good by artificially accelerating the car life cycle rather than making existing vehicles last longer and run cleaner.

Last February, Washington, D.C., lawmakers correctly rejected a similar program to crush rarely driven second and third vehicles in favor of a targeted tax incentive to help boost new-car sales, namely a federal deduction of state sales and excise taxes. During the scrappage debate, members of Congress asked the same question time and time again: Why would we spend tax dollars to destroy good used cars? Excellent question.

Legislation modeled after the German program was introduced in the U.S. House of Representatives in March. The bill calls for the use of U.S. tax dollars to pay consumers $3,000–$5,000 to scrap their old vehicles if they purchase new, fuel-efficient vehicles. However, there is no safeguard to verify that the scrapped vehicle U.S. taxpayers are buying has been driven in recent years and is contributing to the emissions inventory.

Lawmakers cited a recent jump in car sales in Germany in support of the U.S. proposal. SEMA has countered that these short-term sale gains in Germany are not the basis for a sound policy in America. The burst of sales will disappear when the program ends.

“Scrappage programs as proposed will also hurt thousands of independent repair shops, auto restorers, customizers and their customers across the country,” said SEMA Vice President of Government Affairs Steve McDonald. “This industry provides thousands of American jobs and generates millions of dollars in local, state and federal tax revenue. It is time to help the entire auto industry with programs that focus the incentive on the purchase of new vehicles, not destroying valuable old cars and parts.”

The legislation has already gained significant support and likely signals the start of Cash for Clunkers round two. SEMA remains vigilant in opposition and will keep its members informed of all new developments.

Fri, 05/01/2009 - 14:55

SEMA News - May 2009

SEMA LEGISLATIVE AND TECHNICAL AFFAIRS

SEMA Confronts Cash for Clunker Myths in Europe and Prepares for Second Scrappage Battle in U.S. Congress

SEMA News-May 2009-SEMA Confronts Cash for Clunker MythsSEMA launched the largest grassroots effort in its 46-year history earlier this year to keep a national “Cash for Clunkers” program out of the $787 billion economic stimulus bill. The campaign was a success. Nevertheless, some lawmakers remain committed to using a vehicle scrappage program as a means to spur new-car sales.

They are now citing a flawed German program as a model for America.

Cash for Clunkers programs accelerate the normal retirement of vehicles through the purchase of older cars, which are then typically crushed into blocks of scrap metal. Under the German program, the government is offering consumers 2,500 euros (about $3,400 USD) toward the purchase of a new car regardless of the CO2 emissions of the new model, so long as the scrapped vehicle is at least nine years old. The program also permits German consumers to replace a more fuel-efficient older car with a less-efficient newer model.

Like the U.S. proposals, the European-style programs do not stand up to scrutiny. In fact, European Commission (EC) staff warned that the programs focus on age rather than actual emissions; that the cars collected may simply be resold in other countries; and that the scrapped cars were at the end of their useful lives anyway and worth far less than the subsidy.

Both the EC staff and the European Federation for Transport and the Environment have urged Germany and other countries to abandon scrappage subsidy payments, since they do more environmental harm than good by artificially accelerating the car life cycle rather than making existing vehicles last longer and run cleaner.

Last February, Washington, D.C., lawmakers correctly rejected a similar program to crush rarely driven second and third vehicles in favor of a targeted tax incentive to help boost new-car sales, namely a federal deduction of state sales and excise taxes. During the scrappage debate, members of Congress asked the same question time and time again: Why would we spend tax dollars to destroy good used cars? Excellent question.

Legislation modeled after the German program was introduced in the U.S. House of Representatives in March. The bill calls for the use of U.S. tax dollars to pay consumers $3,000–$5,000 to scrap their old vehicles if they purchase new, fuel-efficient vehicles. However, there is no safeguard to verify that the scrapped vehicle U.S. taxpayers are buying has been driven in recent years and is contributing to the emissions inventory.

Lawmakers cited a recent jump in car sales in Germany in support of the U.S. proposal. SEMA has countered that these short-term sale gains in Germany are not the basis for a sound policy in America. The burst of sales will disappear when the program ends.

“Scrappage programs as proposed will also hurt thousands of independent repair shops, auto restorers, customizers and their customers across the country,” said SEMA Vice President of Government Affairs Steve McDonald. “This industry provides thousands of American jobs and generates millions of dollars in local, state and federal tax revenue. It is time to help the entire auto industry with programs that focus the incentive on the purchase of new vehicles, not destroying valuable old cars and parts.”

The legislation has already gained significant support and likely signals the start of Cash for Clunkers round two. SEMA remains vigilant in opposition and will keep its members informed of all new developments.

Fri, 05/01/2009 - 14:55

SEMA News - May 2009

SEMA LEGISLATIVE AND TECHNICAL AFFAIRS

SEMA Confronts Cash for Clunker Myths in Europe and Prepares for Second Scrappage Battle in U.S. Congress

SEMA News-May 2009-SEMA Confronts Cash for Clunker MythsSEMA launched the largest grassroots effort in its 46-year history earlier this year to keep a national “Cash for Clunkers” program out of the $787 billion economic stimulus bill. The campaign was a success. Nevertheless, some lawmakers remain committed to using a vehicle scrappage program as a means to spur new-car sales.

They are now citing a flawed German program as a model for America.

Cash for Clunkers programs accelerate the normal retirement of vehicles through the purchase of older cars, which are then typically crushed into blocks of scrap metal. Under the German program, the government is offering consumers 2,500 euros (about $3,400 USD) toward the purchase of a new car regardless of the CO2 emissions of the new model, so long as the scrapped vehicle is at least nine years old. The program also permits German consumers to replace a more fuel-efficient older car with a less-efficient newer model.

Like the U.S. proposals, the European-style programs do not stand up to scrutiny. In fact, European Commission (EC) staff warned that the programs focus on age rather than actual emissions; that the cars collected may simply be resold in other countries; and that the scrapped cars were at the end of their useful lives anyway and worth far less than the subsidy.

Both the EC staff and the European Federation for Transport and the Environment have urged Germany and other countries to abandon scrappage subsidy payments, since they do more environmental harm than good by artificially accelerating the car life cycle rather than making existing vehicles last longer and run cleaner.

Last February, Washington, D.C., lawmakers correctly rejected a similar program to crush rarely driven second and third vehicles in favor of a targeted tax incentive to help boost new-car sales, namely a federal deduction of state sales and excise taxes. During the scrappage debate, members of Congress asked the same question time and time again: Why would we spend tax dollars to destroy good used cars? Excellent question.

Legislation modeled after the German program was introduced in the U.S. House of Representatives in March. The bill calls for the use of U.S. tax dollars to pay consumers $3,000–$5,000 to scrap their old vehicles if they purchase new, fuel-efficient vehicles. However, there is no safeguard to verify that the scrapped vehicle U.S. taxpayers are buying has been driven in recent years and is contributing to the emissions inventory.

Lawmakers cited a recent jump in car sales in Germany in support of the U.S. proposal. SEMA has countered that these short-term sale gains in Germany are not the basis for a sound policy in America. The burst of sales will disappear when the program ends.

“Scrappage programs as proposed will also hurt thousands of independent repair shops, auto restorers, customizers and their customers across the country,” said SEMA Vice President of Government Affairs Steve McDonald. “This industry provides thousands of American jobs and generates millions of dollars in local, state and federal tax revenue. It is time to help the entire auto industry with programs that focus the incentive on the purchase of new vehicles, not destroying valuable old cars and parts.”

The legislation has already gained significant support and likely signals the start of Cash for Clunkers round two. SEMA remains vigilant in opposition and will keep its members informed of all new developments.

Fri, 05/01/2009 - 14:55

SEMA News - May 2009

SEMA LEGISLATIVE AND TECHNICAL AFFAIRS

SEMA Confronts Cash for Clunker Myths in Europe and Prepares for Second Scrappage Battle in U.S. Congress

SEMA News-May 2009-SEMA Confronts Cash for Clunker MythsSEMA launched the largest grassroots effort in its 46-year history earlier this year to keep a national “Cash for Clunkers” program out of the $787 billion economic stimulus bill. The campaign was a success. Nevertheless, some lawmakers remain committed to using a vehicle scrappage program as a means to spur new-car sales.

They are now citing a flawed German program as a model for America.

Cash for Clunkers programs accelerate the normal retirement of vehicles through the purchase of older cars, which are then typically crushed into blocks of scrap metal. Under the German program, the government is offering consumers 2,500 euros (about $3,400 USD) toward the purchase of a new car regardless of the CO2 emissions of the new model, so long as the scrapped vehicle is at least nine years old. The program also permits German consumers to replace a more fuel-efficient older car with a less-efficient newer model.

Like the U.S. proposals, the European-style programs do not stand up to scrutiny. In fact, European Commission (EC) staff warned that the programs focus on age rather than actual emissions; that the cars collected may simply be resold in other countries; and that the scrapped cars were at the end of their useful lives anyway and worth far less than the subsidy.

Both the EC staff and the European Federation for Transport and the Environment have urged Germany and other countries to abandon scrappage subsidy payments, since they do more environmental harm than good by artificially accelerating the car life cycle rather than making existing vehicles last longer and run cleaner.

Last February, Washington, D.C., lawmakers correctly rejected a similar program to crush rarely driven second and third vehicles in favor of a targeted tax incentive to help boost new-car sales, namely a federal deduction of state sales and excise taxes. During the scrappage debate, members of Congress asked the same question time and time again: Why would we spend tax dollars to destroy good used cars? Excellent question.

Legislation modeled after the German program was introduced in the U.S. House of Representatives in March. The bill calls for the use of U.S. tax dollars to pay consumers $3,000–$5,000 to scrap their old vehicles if they purchase new, fuel-efficient vehicles. However, there is no safeguard to verify that the scrapped vehicle U.S. taxpayers are buying has been driven in recent years and is contributing to the emissions inventory.

Lawmakers cited a recent jump in car sales in Germany in support of the U.S. proposal. SEMA has countered that these short-term sale gains in Germany are not the basis for a sound policy in America. The burst of sales will disappear when the program ends.

“Scrappage programs as proposed will also hurt thousands of independent repair shops, auto restorers, customizers and their customers across the country,” said SEMA Vice President of Government Affairs Steve McDonald. “This industry provides thousands of American jobs and generates millions of dollars in local, state and federal tax revenue. It is time to help the entire auto industry with programs that focus the incentive on the purchase of new vehicles, not destroying valuable old cars and parts.”

The legislation has already gained significant support and likely signals the start of Cash for Clunkers round two. SEMA remains vigilant in opposition and will keep its members informed of all new developments.

Fri, 05/01/2009 - 14:55

SEMA News - May 2009

SEMA LEGISLATIVE AND TECHNICAL AFFAIRS

SEMA Confronts Cash for Clunker Myths in Europe and Prepares for Second Scrappage Battle in U.S. Congress

SEMA News-May 2009-SEMA Confronts Cash for Clunker MythsSEMA launched the largest grassroots effort in its 46-year history earlier this year to keep a national “Cash for Clunkers” program out of the $787 billion economic stimulus bill. The campaign was a success. Nevertheless, some lawmakers remain committed to using a vehicle scrappage program as a means to spur new-car sales.

They are now citing a flawed German program as a model for America.

Cash for Clunkers programs accelerate the normal retirement of vehicles through the purchase of older cars, which are then typically crushed into blocks of scrap metal. Under the German program, the government is offering consumers 2,500 euros (about $3,400 USD) toward the purchase of a new car regardless of the CO2 emissions of the new model, so long as the scrapped vehicle is at least nine years old. The program also permits German consumers to replace a more fuel-efficient older car with a less-efficient newer model.

Like the U.S. proposals, the European-style programs do not stand up to scrutiny. In fact, European Commission (EC) staff warned that the programs focus on age rather than actual emissions; that the cars collected may simply be resold in other countries; and that the scrapped cars were at the end of their useful lives anyway and worth far less than the subsidy.

Both the EC staff and the European Federation for Transport and the Environment have urged Germany and other countries to abandon scrappage subsidy payments, since they do more environmental harm than good by artificially accelerating the car life cycle rather than making existing vehicles last longer and run cleaner.

Last February, Washington, D.C., lawmakers correctly rejected a similar program to crush rarely driven second and third vehicles in favor of a targeted tax incentive to help boost new-car sales, namely a federal deduction of state sales and excise taxes. During the scrappage debate, members of Congress asked the same question time and time again: Why would we spend tax dollars to destroy good used cars? Excellent question.

Legislation modeled after the German program was introduced in the U.S. House of Representatives in March. The bill calls for the use of U.S. tax dollars to pay consumers $3,000–$5,000 to scrap their old vehicles if they purchase new, fuel-efficient vehicles. However, there is no safeguard to verify that the scrapped vehicle U.S. taxpayers are buying has been driven in recent years and is contributing to the emissions inventory.

Lawmakers cited a recent jump in car sales in Germany in support of the U.S. proposal. SEMA has countered that these short-term sale gains in Germany are not the basis for a sound policy in America. The burst of sales will disappear when the program ends.

“Scrappage programs as proposed will also hurt thousands of independent repair shops, auto restorers, customizers and their customers across the country,” said SEMA Vice President of Government Affairs Steve McDonald. “This industry provides thousands of American jobs and generates millions of dollars in local, state and federal tax revenue. It is time to help the entire auto industry with programs that focus the incentive on the purchase of new vehicles, not destroying valuable old cars and parts.”

The legislation has already gained significant support and likely signals the start of Cash for Clunkers round two. SEMA remains vigilant in opposition and will keep its members informed of all new developments.

Fri, 05/01/2009 - 14:55

SEMA News - May 2009

SEMA LEGISLATIVE AND TECHNICAL AFFAIRS

SEMA Confronts Cash for Clunker Myths in Europe and Prepares for Second Scrappage Battle in U.S. Congress

SEMA News-May 2009-SEMA Confronts Cash for Clunker MythsSEMA launched the largest grassroots effort in its 46-year history earlier this year to keep a national “Cash for Clunkers” program out of the $787 billion economic stimulus bill. The campaign was a success. Nevertheless, some lawmakers remain committed to using a vehicle scrappage program as a means to spur new-car sales.

They are now citing a flawed German program as a model for America.

Cash for Clunkers programs accelerate the normal retirement of vehicles through the purchase of older cars, which are then typically crushed into blocks of scrap metal. Under the German program, the government is offering consumers 2,500 euros (about $3,400 USD) toward the purchase of a new car regardless of the CO2 emissions of the new model, so long as the scrapped vehicle is at least nine years old. The program also permits German consumers to replace a more fuel-efficient older car with a less-efficient newer model.

Like the U.S. proposals, the European-style programs do not stand up to scrutiny. In fact, European Commission (EC) staff warned that the programs focus on age rather than actual emissions; that the cars collected may simply be resold in other countries; and that the scrapped cars were at the end of their useful lives anyway and worth far less than the subsidy.

Both the EC staff and the European Federation for Transport and the Environment have urged Germany and other countries to abandon scrappage subsidy payments, since they do more environmental harm than good by artificially accelerating the car life cycle rather than making existing vehicles last longer and run cleaner.

Last February, Washington, D.C., lawmakers correctly rejected a similar program to crush rarely driven second and third vehicles in favor of a targeted tax incentive to help boost new-car sales, namely a federal deduction of state sales and excise taxes. During the scrappage debate, members of Congress asked the same question time and time again: Why would we spend tax dollars to destroy good used cars? Excellent question.

Legislation modeled after the German program was introduced in the U.S. House of Representatives in March. The bill calls for the use of U.S. tax dollars to pay consumers $3,000–$5,000 to scrap their old vehicles if they purchase new, fuel-efficient vehicles. However, there is no safeguard to verify that the scrapped vehicle U.S. taxpayers are buying has been driven in recent years and is contributing to the emissions inventory.

Lawmakers cited a recent jump in car sales in Germany in support of the U.S. proposal. SEMA has countered that these short-term sale gains in Germany are not the basis for a sound policy in America. The burst of sales will disappear when the program ends.

“Scrappage programs as proposed will also hurt thousands of independent repair shops, auto restorers, customizers and their customers across the country,” said SEMA Vice President of Government Affairs Steve McDonald. “This industry provides thousands of American jobs and generates millions of dollars in local, state and federal tax revenue. It is time to help the entire auto industry with programs that focus the incentive on the purchase of new vehicles, not destroying valuable old cars and parts.”

The legislation has already gained significant support and likely signals the start of Cash for Clunkers round two. SEMA remains vigilant in opposition and will keep its members informed of all new developments.

Fri, 05/01/2009 - 14:55

SEMA News - May 2009

SEMA LEGISLATIVE AND TECHNICAL AFFAIRS

SEMA Provides Legislative Advocacy for the Industry

SEMA News-May 2009-Proven Performance

Courtesy Kevin Lee, Rod & Custom Magazine

The laws and regulations that govern how SEMA members do business have an increased and growing impact on the way automotive specialty-equipment products are made, distributed and marketed. SEMA has a proven legislative and regulatory program led by a fulltime professional staff based in Washington, D.C., that continually works on behalf of the membership.

The program includes a number of components that together have resulted in a long list of successes of significant benefit to the industry.

“Our members work hard to develop their products and run their businesses. In turn, our office works hard to help them thrive in the marketplace,” said Steve McDonald, SEMA vice president of government affairs. “As the nation and our industry struggles with a stalled economy, our charge is to stay on top of every relevant state and federal matter of consequence to our membership to ensure the best possible outcome.”

McDonald heads up the SEMA office in Washington, D.C., where he and a team of experts track and analyze legislation and regulations, both state and federal, and then advocate positions to public officials on behalf of member companies. In addition to opposing bills that would potentially harm the automotive hobby or hinder SEMA-member companies, the staff proactively pursues opportunities to enact pro-industry initiatives.

State Legislation: SEMA staff works with state legislators to overhaul existing statutes and create brand-new programs that safeguard and expand the specialty-equipment aftermarket. Over the years, the state legislative program has brought a series of significant legislative and regulatory accomplishments for the industry and the vehicle-enthusiast community on issues ranging from equipment standards to registration and titling classifications to emissions test exemptions to hobbyist rights.

State Caucus: 2009 marks the four-year anniversary of the founding of the State Automotive Enthusiast Leadership Caucus, a bipartisan group of state lawmakers with a passion for automobiles. In its daily efforts to promote and protect the auto hobby, SEMA partners with caucus members from across the country to raise the motor-vehicle hobby’s profile in the state legislatures and in the public’s eyes. Approximately 370 state legislators from all 50 states are involved in the caucus.

Federal Legislation: SEMA is involved in a wide variety of issues on Capitol Hill that impact the industry, from regulatory reform to intellectual-property protection and health care coverage. Other legislative priorities include tackling energy and environmental issues in a fashion that takes jobs, safety, consumer choice and technology into consideration. SEMA also continues to pursue tax relief on measures that spur economic growth along with permanent renewal of research and development.

Federal Agencies: On the regulatory front, the government affairs office works with a number of agencies that have jurisdiction over the marketing of automotive equipment. These include the National Highway Traffic Safety Administration, the U.S. Environmental Protection Agency and the Federal Trade Commission. Topics range from regulations governing tire-pressure monitoring systems, roof crush, side impact, electronic stability control and hazardous air pollutants during auto painting operations to deceptive marketing practices.

SEMA Action Network: Another component of the SEMA legislative program involves working with automotive enthusiasts. The SEMA Action Network (SAN) is a partnership of vehicle clubs and enthusiasts who unite to protect their hobby. With the support of 4,000-plus car clubs, thousands of individual contacts and 150-plus publications, the SAN has an estimated reach of 36 million enthusiasts in the United States and Canada. These members have been effective in amplifying SEMA’s political voice on issues affecting the specialty-equipment auto parts industry.

Congressional Caucus: Founded in 1996, the 100th year of the car, the Congressional Automotive Performance and Motorsports Caucus is the federal equivalent of SEMA’s state caucus. As a coalition of lawmakers who love cars and recognize the importance of the industry to America, these Congress members help raise the profile of the automotive specialty-equipment industry in Washington and around the country.

Political Action Committee: The SEMA Political Action Committee (SEMA PAC) is a vital component of the SEMA legislative program. Established in 2003, SEMA PAC helps support candidates for Congress on both sides of the aisle who support our industry. Through SEMA PAC, individuals can pool their resources to give the industry a larger cumulative voice on Capitol Hill.

Congressional Visits: SEMA’s congressional visits program can produce long-term relationships. Under the initiative, SEMA’s congressional relations staff facilitates meetings with a U.S. representative or senator at a SEMA-member facility. Other SEMA members in that district are invited to participate in roundtable discussions on topics of interest to the individual companies and the industry.

Get Involved: While the various components of the SEMA government affairs program have resulted in great success for the industry, it is essential that all SEMA-member companies and their employees be involved as well. You can stay current on the latest laws and regulations affecting the automotive aftermarket industry by visiting www.sema.org/government-affairs. Contacting your lawmaker about bills in your state legislature or in the U.S. Congress is vital to our success. Lawmakers really do listen to their constituents—so does the SEMA government affairs staff. For more information, contact contact Steve McDonald or call 202/783-6007.

Fri, 05/01/2009 - 14:55

SEMA News - May 2009

SEMA LEGISLATIVE AND TECHNICAL AFFAIRS

SEMA Provides Legislative Advocacy for the Industry

SEMA News-May 2009-Proven Performance

Courtesy Kevin Lee, Rod & Custom Magazine

The laws and regulations that govern how SEMA members do business have an increased and growing impact on the way automotive specialty-equipment products are made, distributed and marketed. SEMA has a proven legislative and regulatory program led by a fulltime professional staff based in Washington, D.C., that continually works on behalf of the membership.

The program includes a number of components that together have resulted in a long list of successes of significant benefit to the industry.

“Our members work hard to develop their products and run their businesses. In turn, our office works hard to help them thrive in the marketplace,” said Steve McDonald, SEMA vice president of government affairs. “As the nation and our industry struggles with a stalled economy, our charge is to stay on top of every relevant state and federal matter of consequence to our membership to ensure the best possible outcome.”

McDonald heads up the SEMA office in Washington, D.C., where he and a team of experts track and analyze legislation and regulations, both state and federal, and then advocate positions to public officials on behalf of member companies. In addition to opposing bills that would potentially harm the automotive hobby or hinder SEMA-member companies, the staff proactively pursues opportunities to enact pro-industry initiatives.

State Legislation: SEMA staff works with state legislators to overhaul existing statutes and create brand-new programs that safeguard and expand the specialty-equipment aftermarket. Over the years, the state legislative program has brought a series of significant legislative and regulatory accomplishments for the industry and the vehicle-enthusiast community on issues ranging from equipment standards to registration and titling classifications to emissions test exemptions to hobbyist rights.

State Caucus: 2009 marks the four-year anniversary of the founding of the State Automotive Enthusiast Leadership Caucus, a bipartisan group of state lawmakers with a passion for automobiles. In its daily efforts to promote and protect the auto hobby, SEMA partners with caucus members from across the country to raise the motor-vehicle hobby’s profile in the state legislatures and in the public’s eyes. Approximately 370 state legislators from all 50 states are involved in the caucus.

Federal Legislation: SEMA is involved in a wide variety of issues on Capitol Hill that impact the industry, from regulatory reform to intellectual-property protection and health care coverage. Other legislative priorities include tackling energy and environmental issues in a fashion that takes jobs, safety, consumer choice and technology into consideration. SEMA also continues to pursue tax relief on measures that spur economic growth along with permanent renewal of research and development.

Federal Agencies: On the regulatory front, the government affairs office works with a number of agencies that have jurisdiction over the marketing of automotive equipment. These include the National Highway Traffic Safety Administration, the U.S. Environmental Protection Agency and the Federal Trade Commission. Topics range from regulations governing tire-pressure monitoring systems, roof crush, side impact, electronic stability control and hazardous air pollutants during auto painting operations to deceptive marketing practices.

SEMA Action Network: Another component of the SEMA legislative program involves working with automotive enthusiasts. The SEMA Action Network (SAN) is a partnership of vehicle clubs and enthusiasts who unite to protect their hobby. With the support of 4,000-plus car clubs, thousands of individual contacts and 150-plus publications, the SAN has an estimated reach of 36 million enthusiasts in the United States and Canada. These members have been effective in amplifying SEMA’s political voice on issues affecting the specialty-equipment auto parts industry.

Congressional Caucus: Founded in 1996, the 100th year of the car, the Congressional Automotive Performance and Motorsports Caucus is the federal equivalent of SEMA’s state caucus. As a coalition of lawmakers who love cars and recognize the importance of the industry to America, these Congress members help raise the profile of the automotive specialty-equipment industry in Washington and around the country.

Political Action Committee: The SEMA Political Action Committee (SEMA PAC) is a vital component of the SEMA legislative program. Established in 2003, SEMA PAC helps support candidates for Congress on both sides of the aisle who support our industry. Through SEMA PAC, individuals can pool their resources to give the industry a larger cumulative voice on Capitol Hill.

Congressional Visits: SEMA’s congressional visits program can produce long-term relationships. Under the initiative, SEMA’s congressional relations staff facilitates meetings with a U.S. representative or senator at a SEMA-member facility. Other SEMA members in that district are invited to participate in roundtable discussions on topics of interest to the individual companies and the industry.

Get Involved: While the various components of the SEMA government affairs program have resulted in great success for the industry, it is essential that all SEMA-member companies and their employees be involved as well. You can stay current on the latest laws and regulations affecting the automotive aftermarket industry by visiting www.sema.org/government-affairs. Contacting your lawmaker about bills in your state legislature or in the U.S. Congress is vital to our success. Lawmakers really do listen to their constituents—so does the SEMA government affairs staff. For more information, contact contact Steve McDonald or call 202/783-6007.

Fri, 05/01/2009 - 14:55

SEMA News - May 2009

SEMA LEGISLATIVE AND TECHNICAL AFFAIRS

SEMA Provides Legislative Advocacy for the Industry

SEMA News-May 2009-Proven Performance

Courtesy Kevin Lee, Rod & Custom Magazine

The laws and regulations that govern how SEMA members do business have an increased and growing impact on the way automotive specialty-equipment products are made, distributed and marketed. SEMA has a proven legislative and regulatory program led by a fulltime professional staff based in Washington, D.C., that continually works on behalf of the membership.

The program includes a number of components that together have resulted in a long list of successes of significant benefit to the industry.

“Our members work hard to develop their products and run their businesses. In turn, our office works hard to help them thrive in the marketplace,” said Steve McDonald, SEMA vice president of government affairs. “As the nation and our industry struggles with a stalled economy, our charge is to stay on top of every relevant state and federal matter of consequence to our membership to ensure the best possible outcome.”

McDonald heads up the SEMA office in Washington, D.C., where he and a team of experts track and analyze legislation and regulations, both state and federal, and then advocate positions to public officials on behalf of member companies. In addition to opposing bills that would potentially harm the automotive hobby or hinder SEMA-member companies, the staff proactively pursues opportunities to enact pro-industry initiatives.

State Legislation: SEMA staff works with state legislators to overhaul existing statutes and create brand-new programs that safeguard and expand the specialty-equipment aftermarket. Over the years, the state legislative program has brought a series of significant legislative and regulatory accomplishments for the industry and the vehicle-enthusiast community on issues ranging from equipment standards to registration and titling classifications to emissions test exemptions to hobbyist rights.

State Caucus: 2009 marks the four-year anniversary of the founding of the State Automotive Enthusiast Leadership Caucus, a bipartisan group of state lawmakers with a passion for automobiles. In its daily efforts to promote and protect the auto hobby, SEMA partners with caucus members from across the country to raise the motor-vehicle hobby’s profile in the state legislatures and in the public’s eyes. Approximately 370 state legislators from all 50 states are involved in the caucus.

Federal Legislation: SEMA is involved in a wide variety of issues on Capitol Hill that impact the industry, from regulatory reform to intellectual-property protection and health care coverage. Other legislative priorities include tackling energy and environmental issues in a fashion that takes jobs, safety, consumer choice and technology into consideration. SEMA also continues to pursue tax relief on measures that spur economic growth along with permanent renewal of research and development.

Federal Agencies: On the regulatory front, the government affairs office works with a number of agencies that have jurisdiction over the marketing of automotive equipment. These include the National Highway Traffic Safety Administration, the U.S. Environmental Protection Agency and the Federal Trade Commission. Topics range from regulations governing tire-pressure monitoring systems, roof crush, side impact, electronic stability control and hazardous air pollutants during auto painting operations to deceptive marketing practices.

SEMA Action Network: Another component of the SEMA legislative program involves working with automotive enthusiasts. The SEMA Action Network (SAN) is a partnership of vehicle clubs and enthusiasts who unite to protect their hobby. With the support of 4,000-plus car clubs, thousands of individual contacts and 150-plus publications, the SAN has an estimated reach of 36 million enthusiasts in the United States and Canada. These members have been effective in amplifying SEMA’s political voice on issues affecting the specialty-equipment auto parts industry.

Congressional Caucus: Founded in 1996, the 100th year of the car, the Congressional Automotive Performance and Motorsports Caucus is the federal equivalent of SEMA’s state caucus. As a coalition of lawmakers who love cars and recognize the importance of the industry to America, these Congress members help raise the profile of the automotive specialty-equipment industry in Washington and around the country.

Political Action Committee: The SEMA Political Action Committee (SEMA PAC) is a vital component of the SEMA legislative program. Established in 2003, SEMA PAC helps support candidates for Congress on both sides of the aisle who support our industry. Through SEMA PAC, individuals can pool their resources to give the industry a larger cumulative voice on Capitol Hill.

Congressional Visits: SEMA’s congressional visits program can produce long-term relationships. Under the initiative, SEMA’s congressional relations staff facilitates meetings with a U.S. representative or senator at a SEMA-member facility. Other SEMA members in that district are invited to participate in roundtable discussions on topics of interest to the individual companies and the industry.

Get Involved: While the various components of the SEMA government affairs program have resulted in great success for the industry, it is essential that all SEMA-member companies and their employees be involved as well. You can stay current on the latest laws and regulations affecting the automotive aftermarket industry by visiting www.sema.org/government-affairs. Contacting your lawmaker about bills in your state legislature or in the U.S. Congress is vital to our success. Lawmakers really do listen to their constituents—so does the SEMA government affairs staff. For more information, contact contact Steve McDonald or call 202/783-6007.