By SEMA Washington, D.C., Staff
 |
When is it time to expand your business? When is it time to take a cross-country adventure? It is always time to thank volunteer angels who rescue your stuck vehicle. These are a few of the topics discussed in the digital November issue of Off-Road Business magazine. View the magazine.
By SEMA Editors
 Dr. Jamie Meyer |
Tim Frost, the National Speedway Directory publisher, has announced the schedule for the 2020 virtual Race Track Business Conference (RTBC), set for Wednesday, December 9.
Headlining the schedule is PRI President Dr. Jamie Meyer. He will present the ninth annual event's opening remarks, which typically occurs during the PRI Trade Show in Indianapolis but was canceled this year due to COVID-19. Meyer will discuss Change and Adapt: The Year of Challenge and Uncertainty.
The online gathering, set from 9:00 a.m.–12:00 p.m. (CST), will also feature four cutting-edge presentations, including:
Networking will take place directly after the closing remarks at 12:00 p.m. The cost to attend the virtual event is $25.
For more information, visit www.rtbc.speedwaysonline.com. To register, visit here.
By SEMA Editors
| Dr. Jamie Meyer |
Tim Frost, the National Speedway Directory publisher, has announced the schedule for the 2020 virtual Race Track Business Conference (RTBC), set for Wednesday, December 9.
Headlining the schedule is PRI President Dr. Jamie Meyer. He will present the ninth annual event's opening remarks, which typically occurs during the PRI Trade Show in Indianapolis but was canceled this year due to COVID-19. Meyer will discuss Change and Adapt: The Year of Challenge and Uncertainty.
The online gathering, set from 9:00 a.m.–12:00 p.m. (CST), will also feature four cutting-edge presentations, including:
Networking will take place directly after the closing remarks at 12:00 p.m. The cost to attend the virtual event is $25.
For more information, visit www.rtbc.speedwaysonline.com. To register, visit here.
Host Ralph Sheheen takes us to Mooresville for a tour of two top manufacturing facilities, plus a sneak peek of upcoming stops.
Host Ralph Sheheen takes us to Mooresville for a tour of two top manufacturing facilities, plus a sneak peek of upcoming stops.
By Fredy Ramirez
SEMA eNews regularly collects new product press releases from companies to highlight each week. Below are this week's submissions.
Mishimoto Performance Air Intake
Mishimoto announces the release of its Performance Air Intake for the ’20+ Toyota Supra 3.0L. The kit is designed to be 17% less restrictive than the stock system and increases intake and turbo sound under aggressive acceleration.
A heatshield incorporated into the air box is engineered to protect against ambient engine bay heat. The filters are manufactured to be cleaned and reused.
877-466-4744
www.mishimoto.com
PN: MMAI-SUP-20
Magnaflow Performance Exhaust System For Jeep Wrangler
Magnaflow launches its overland performance exhaust system for the ’12–‘18 Jeep Wrangler Unlimited. The system features a stainless-steel construction throughout the entire system that is designed to withstand the toughest terrain and climate out there. The high clearance design incorporated into the exhaust is manufactured to allow for travel over difficult terrains.
Engineered to give more ground clearance over stock, the system is tucked closer up to the body. The series exhaust systems also include necessary hardware and components for a complete, bolt-on installation.
800-990-0905
www.magnaflow.com
PN: 19539
Steele Rubber Products Toyota Land Cruiser Parts
Steele Rubber Products introduces parts for ‘63–‘19 Toyota Land Cruisers. This line includes weatherstripping and seals for doors, vent windows, liftgates, windshields, rear windows, hood to cowl, run channel, hood to radiator and other essential parts for these versatile SUVs.
800-230-8101
www.steelerubber.com
PN: Vary
Earl’s Weld-in Mounting Rings
Earl’s has released its weld-in mounting rings. The rings are designed to allow for the use of a modern in-tank EFI fuel modules in custom or modified fuel tanks.
The rings are engineered to accommodate most late-model GM, Mopar, and Ford factory fuel modules which have been standardized to a common size with a thin 6-in.-diameter hat at the top of the fuel module.
866-464-6553
www.holley.com
PN: Vary
Lakewood Cast Aluminum Bellhousing
Lakewood announces the launch of its cast aluminum bellhousings.
The housing is engineered to connect Chevy small-block and big-block, and LS engines to transmissions utilizing the standard GM pattern such as the Muncie, Saginaw, Borg Warner T10, and Tremec TKO transmissions.
All bellhousing kits come complete with clutch fork boot, inspection cover and Grade-8 mounting hardware, which are also available individually.
866-464-6553
www.holley.com
PN: Vary
TREMEC TKX 5-Speed RWD Transmission
TREMEC has released its compact 5-speed transmission TKX for upgrading classic muscle cars, ’30s-era roadster coupes or any application where space is an issue. The transmission is designed to shift smoothly at high rpm through the use of multi-cone synchronizers and hybrid synchronizer rings.
At the same time, noise, vibration and harshness (NVH) performance is engineered to be optimized with a gear layout to best control stress levels while providing structural stiffness with a ribbed, 3-piece aluminum housing. The transmission is constructed to be durable through oversized gear widths, gaskets at all flanges and caged needle bearings in all gear positions.
714-630-2764
www.mcleodracing.com
PN: Vary
Armorlite Full Floor Replacement System
Armorlite has launched its full floor replacement system for Jeep Wrangler JK 2-door models. The kit will be available in two colors—Mesa Smoke, the original matte black, along with the new Desert Khaki. Armorlite is built with three layers. The first is a proprietary marine-grade topcoat designed to provide grip, exceptional durability and water protection.
The second layer is constructed to provide structure for a factory fit, while the third is a polyester insulating layer engineered to provide substantial noise and heat reduction, while also preventing mold and mildew for instances when water finds its way in. Included in the kit is a front floor replacement, rear floor and cargo area replacement and four drain plugs.
www.goarmorlite.com
PN: Vary
DEI Pit Crew Safety Kit
Design Engineering, Inc. announces the release of its Pit Crew Safety Kit. The kit features vision, hearing and arm protection for professional mechanics, pit crew members and do-it-yourselfers.
Kits include DEI Safety Glasses, DEI Ear Plugs and DEI Kevlar Safety Sleeves.
800-264-9472
www.designengineering.com
PN: Vary
BMR Differential Bearing Kit
BMR Suspension announces the release of its differential bearing kit for the ’05–’14 Mustang. The kit is designed to minimize wheelhop and enhance rear stability.
Consisting of heavy-duty stainless-steel bearings in CNC-machined stainless-steel bearing cups, the kit is engineered to eliminate bushing deflection to reduce upper control arm deflection, rear wheel alignment changes, and excessive pinion rise.
The kit is constructed for drag racing and handling applications.
813-986-9302
www.bmrsuspension.com
PN: BK079
Roadster Shop Chassis
Roadster shop announces the release of its ’47–’54 Chevy, ’55–’59 Chevy and ’53–’56 Ford Truck chassis in both “Standard” and “Slammed” ride heights.
SPEC “Slammed” chassis are available in coilover and bagged configurations, and are designed to bolt under your classic truck with minimal mods to the existing vehicle.
847-949-7637
www.roadstershop.com
PN: Vary
By Ashley Reyes
Video of the 2020 SEMA Launch Pad competition, presented by the Young Executives Network (YEN), is now available on the SEMA Launch Pad website. Featuring exclusive footage of this year’s competitors in action, the 45-minute video includes backstage interviews and discussions with the finalists and judges.
Watch the actual pitches made by Roland Hence of FrontLane Inc., Justin Bradshaw of REVER, Eric Rivera of Dirt Dynamix, Matt Rafeld of BeachComber Offroad and Khanjan Desai of Alchemy, and listen as the judges gives each competitor feedback, and discuss the presentations among themselves. With the judges grading on how well the ideas were presented, innovation of product, and overall business plan, decide for yourself who you think had the best product.
“The process that has led them to this point has been really intense,” said Launch Pad judge Melanie White of Hellwig Products. “But you can tell there is so much passion and that’s what I love about this. All of them are solving a problem in our industry.”
White was joined by Launch Pad host Aaron Kaufman, and judges Daryl Sampson of Turn 14 Distribution, Dan Kahn of Kahn Media, Jonathan Mill of Alloy Studios and Brian Reese of The Retrofit Source.
“What I was not expecting is how conversational the questions became,” said Hence, who was selected as Launch Pad winner for his product the Impulse – Emergency Brake Light. “It really felt like we were working together to find a way to make the product and the company better. I really appreciated that and it was a great surprise.”
Learn how the other four finalists are advancing the specialty-equipment industry, apply to pre-qualify for the 2021 competition, and sign up to receive program updates by visiting the SEMA Launch Pad website.
By Ashley Reyes
Video of the 2020 SEMA Launch Pad competition, presented by the Young Executives Network (YEN), is now available on the SEMA Launch Pad website. Featuring exclusive footage of this year’s competitors in action, the 45-minute video includes backstage interviews and discussions with the finalists and judges.
Watch the actual pitches made by Roland Hence of FrontLane Inc., Justin Bradshaw of REVER, Eric Rivera of Dirt Dynamix, Matt Rafeld of BeachComber Offroad and Khanjan Desai of Alchemy, and listen as the judges gives each competitor feedback, and discuss the presentations among themselves. With the judges grading on how well the ideas were presented, innovation of product, and overall business plan, decide for yourself who you think had the best product.
“The process that has led them to this point has been really intense,” said Launch Pad judge Melanie White of Hellwig Products. “But you can tell there is so much passion and that’s what I love about this. All of them are solving a problem in our industry.”
White was joined by Launch Pad host Aaron Kaufman, and judges Daryl Sampson of Turn 14 Distribution, Dan Kahn of Kahn Media, Jonathan Mill of Alloy Studios and Brian Reese of The Retrofit Source.
“What I was not expecting is how conversational the questions became,” said Hence, who was selected as Launch Pad winner for his product the Impulse – Emergency Brake Light. “It really felt like we were working together to find a way to make the product and the company better. I really appreciated that and it was a great surprise.”
Learn how the other four finalists are advancing the specialty-equipment industry, apply to pre-qualify for the 2021 competition, and sign up to receive program updates by visiting the SEMA Launch Pad website.
By Ashley Reyes
Video of the 2020 SEMA Launch Pad competition, presented by the Young Executives Network (YEN), is now available on the SEMA Launch Pad website. Featuring exclusive footage of this year’s competitors in action, the 45-minute video includes backstage interviews and discussions with the finalists and judges.
Watch the actual pitches made by Roland Hence of FrontLane Inc., Justin Bradshaw of REVER, Eric Rivera of Dirt Dynamix, Matt Rafeld of BeachComber Offroad and Khanjan Desai of Alchemy, and listen as the judges gives each competitor feedback, and discuss the presentations among themselves. With the judges grading on how well the ideas were presented, innovation of product, and overall business plan, decide for yourself who you think had the best product.
“The process that has led them to this point has been really intense,” said Launch Pad judge Melanie White of Hellwig Products. “But you can tell there is so much passion and that’s what I love about this. All of them are solving a problem in our industry.”
White was joined by Launch Pad host Aaron Kaufman, and judges Daryl Sampson of Turn 14 Distribution, Dan Kahn of Kahn Media, Jonathan Mill of Alloy Studios and Brian Reese of The Retrofit Source.
“What I was not expecting is how conversational the questions became,” said Hence, who was selected as Launch Pad winner for his product the Impulse – Emergency Brake Light. “It really felt like we were working together to find a way to make the product and the company better. I really appreciated that and it was a great surprise.”
Learn how the other four finalists are advancing the specialty-equipment industry, apply to pre-qualify for the 2021 competition, and sign up to receive program updates by visiting the SEMA Launch Pad website.
By SEMA Editors
On November 19, at 8:00 p.m. (EST), Ford will show off its hottest new rides customized for your next adventure, streaming live for 60 minutes on YouTube. The SEMA Show special event will highlight product news, project vehicle reveals, behind-the-garage-door stories with customers, celebrities and dealers and more. All are welcome to tune in.
On the following day, November 20, the event will feature 30-minute live, interactive Q&A sessions with designers, engineers, builders and drivers, and will also showcase the Bronco, Bronco Sport, F-150 and Mustang Mach-E. Sessions will take place throughout the day, and attendees will have a chance to win a VIP Experience with Ford during the 2021 SEMA Show in Las Vegas.
On Day 2, space is limited to the first 250 registrants per each Q&A session, so reserve your spot today. To get on the invitation list for one of these exclusive sessions, click here.