News | Specialty Equipment Market Association (SEMA)

Thu, 08/01/2013 - 10:53

SEMA News—August 2013

LEGISLATIVE AND TECHNICAL AFFAIRS
By Jim McFarland

Emissions Compliance Made Easy

SEMA Focuses Efforts to Help Members Achieve Regulatory Requirements

	Partnering with the Automobile Club of Southern California, the new SEMA Garage-Industry Innovations Center, located at SEMA’s Diamond Bar, California, headquarters, is fully equipped to help SEMA members develop marketable, emissions-related products.

SEMA continues its work to untangle a variety of emissions-compliance requirements while identifying and pursuing alternative paths to relieve or clarify concerns about navigating the regulatory landscape. At both the state and federal levels, the association is engaged in facilitating member compliance through a variety of programs and initiatives. This article summarizes issues that are either being addressed or have become more manageable as a result of these efforts.

The obtainment of a California Air Resources Board (CARB) Executive Order (EO) provides “reasonable basis” for meeting the anti-tampering provisions of the Federal Clean Air Act. As a consequence, members who are able to secure an EO for their products may market their products nationwide. Recognizing the value of an EO through the regulatory obstacle course, SEMA continues to seek ways to aid members in achieving EO status.

Perhaps the biggest step a SEMA member can take to initiate the process is to become familiar with SEMA’s guide to emissions certification of specialty automotive aftermarket parts. Known as the Black Book and available only to members, the online guide is designed to expedite the process by which SEMA members can gain parts certification. SEMA has included website links to provide firsthand information from various compliance-related sources, including the CARB website. In addition, SEMA provides simple and easy steps to obtaining a CARB EO, application forms, helpful hints, compliance criteria checklists, retail restrictions information and a list of independent laboratories equipped to carry out required emissions testing protocols.

And now, through the new SEMA Garage-Industry Innovations Center, the association has partnered with the Automobile Club of Southern California to assist members during the iterative process of developing marketable, emissions-related products (see “SEMA Garage-Industry Innovations Center” sidebar). This includes assistance in not only the analysis of test data leading up to actual emissions testing, but also laboratory services embracing the required EO tests.

	In the dynometer control room of the new SEMA Garage-Industry Innovations Center. The center offers complete laboratory services embracing required emissions testing.

Now there is a well-defined path to achieve emissions compliance with CARB and the U.S. Environmental Protection Agency (EPA), from start to finish. From experience, we know that it is highly preferential to begin the process ahead of new-product introduction, for multiple reasons. This approach tends to provide additional time to meet certification goals prior to product development conclusion. It sends a favorable message to the regulators as well.

SEMA recently concluded a working arrangement with the Clemson University International Center for Automotive Research (CU-ICAR). This relationship will entail a multi-phase, two-year contract that will produce a range of information useful to SEMA members working to bring products into emissions compliance while dealing with new OEM technologies. In particular, these include direct-injection, gasoline-fueled engines in addition to small-displacement, turbo-supercharged, downsized powerplants. The value of this partnership can be viewed in a fashion similar to when onboard diagnostics (especially OBD-II) came onto the scene in 1996 and was initially deemed insurmountable by the specialty automotive aftermarket.

This view was largely the result of aftermarket manufacturers not being able to investigate OBD systems ahead of their introduction and mass use. It is SEMA’s intent to utilize CU-ICAR research to provide members with information earlier than what was experienced with OBD. There will also be opportunities for members to avail themselves of the CU-ICAR test facilities, augmented by consultation with experienced ICAR staff and participating graduate students.

Of course, there are other compliance-related services being offered by SEMA. For example, there has been continuing concern for the potential impact on CO2 emissions following the installation of performance aftermarket parts. SEMA staff has continued to monitor sources for this information, specifically emissions-testing laboratories where clients have requested data on the effects of such products on fuel economy.

	Recognizing the value of a California Air Resources Board (CARB) Executive Order (EO), SEMA continues to seek ways to aid members in achieving certification status.

The EPA has two methods to evaluate fuel economy. Both approaches utilize the so-called “carbon balance” method to determine fuel mileage. Specifically, a mathematical computation is involved, based on the model year and exhaust emissions of a vehicle. During emissions testing, the carbon content in the fuel is measured and a determination of the CO2 produced is a byproduct of the computation. Using this method of measurement (also a routine procedure used by the EPA in its fuel economy test programs) and based on data collected from independent emissions test facilities, the majority of specialty aftermarket products do not have a major impact on CO2 emissions.

While some of these types of monitoring are ongoing, others pertain to the evolution of certain recent regulatory requirements. A good example is the assistance SEMA has been providing diesel performance parts companies participating in CARB’s Products in Progress program, which requires these members to devise and administer a mandated parts-recall program.

This is a type of program with which affected SEMA members have had virtually no experience, certainly in recent times. Consequently, SEMA has been acting as an intermediary between the agency and these companies, clarifying and assisting in the design and approval of a recall process. It has also become evident that CARB has not directed such programs toward the specialty automotive aftermarket, which requires a procedure that is non-OEM oriented.

SEMA continues to monitor both old and emerging requirements and act as an intermediary between members seeking compliance and the regulatory agency, whether it’s CARB or EPA.

This service is only one among the various benefits derived from membership in the association. It is in the spirit of providing specific compliance and product evolution opportunities to its members that the new SEMA Garage-Industry Innovations Center and investment in the CU-ICAR program have been designed and are being implemented.

New From SEMA: Help With Emissions Certifications and Much More

Thu, 08/01/2013 - 10:35

SEMA News—August 2013

CHRIS KERSTING

New From SEMA: Help With Emissions Certifications and Much More

SEMA has fielded many questions about the emissions certification process over the years, and we’ve learned a lot along the way. We’ve recently taken some important steps to help member companies create performance parts that both make power and comply with state and federal regulations. You’ll be glad to know that these services are now wrapped into a new facility. The SEMA Garage–Industry Innovations Center offers a range of tools and opportunities to help you develop high-quality products more quickly and effectively.

If you are looking for information to understand the California Air Resources Board (CARB) Executive Order (EO) exemption program, both new and experienced members will benefit from our new “CARB EO Assistance.” For starters, we’ve collected all the information you need to know about the regulations and the EO exemption process in a user-friendly way. For a digestible overview, we suggest that you download a copy of the updated SEMA Black Book. It’s available free to SEMA members on www.sema.org.

While we expect that you’ll find the Black Book helpful, SEMA also now makes expert personnel available to SEMA members to answer your EO-related questions and help guide you through the EO certification testing process. The SEMA Garage facility also houses a fully certified emissions test lab, the Automotive Research Center (ARC), operated by the Automobile Club of Southern California.

The ARC has been in operation for more than 30 years. One of its core capabilities is testing related to obtaining EOs for emissions-related products. The Automobile Club is working with SEMA to give members the opportunity to work through the iterative process of getting an EO. Automobile Club technicians are responsible for all testing at the ARC and act as a third-party, unbiased entity, which is essential for the legitimacy of the testing.

The Automobile Club emissions lab enjoys a strong reputation with both the industry and with CARB, and SEMA members will enjoy priority access and special member rates for both development work on the dyno and for EO emissions testing. Your company need not be located in Southern California to benefit; SEMA members already make use of the facility from other locations around the country and the globe. (See p. 54 of this issue for an in-depth article on our new EO-related services and the SEMA Garage.)

We recognize that not all SEMA-member companies require the dyno and emissions testing capabilities offered through our partnership with the Automobile Club. I’m pleased to report that the SEMA Garage houses other breakthrough tools and services to assist members in developing a wide range of parts and accessories.

For example, SEMA is expanding the mix of makes and models for our well-regarded Vehicle Measuring Sessions. In most cases, we’ll have the vehicles for weeks rather than single-day sessions. When members show up, they will find that the SEMA Garage is equipped with a new heavy-duty lift, a complete set of tools, vehicle measuring and scanning tools, rapid prototyping equipment and, coming soon, a fully equipped media cove. As an important complement to these tools, SEMA is also taking steps to increase the makes/models for which we have CAD data in our Technology Transfer library.

The fact that all of these assets are in one place and available to SEMA-member companies—whether in Los Angeles or elsewhere—will help many members shorten the product-development path, reduce costs and deliver the highest-quality products. Over time, we anticipate that the SEMA Garage will become a center for information on how we can help our members address integrations with ever-more-complex vehicle technology.

We hope that you find the SEMA Garage–Industry Innovations Center a valuable new set of services for your SEMA membership. To learn more or to begin using these tools, simply contact the SEMA offices or reach out to Mike Spagnola.

—Chris Kersting, SEMA President and CEO