By SEMA Editors

Exhibitors of the 2019 SEMA Show can expand their reach, product exposure and Show-floor presence by offering products to builders through the Products for Project-Vehicle Builders list.

Exhibitors of the 2019 SEMA Show are invited to expand their reach, product exposure and Show-floor presence by offering products to builders through the Products for Project-Vehicle Builders list. The list connects manufacturers with builders looking to create or complete a vehicle project.

The list, which will be updated in SEMA eNews, features product offers and contact information provided by confirmed SEMA Show exhibitors. Builders interested in obtaining a product use the information to contact exhibitors directly. With each project vehicle required to be supported by a current 2019 SEMA Show exhibitor, all product-placement decisions, negotiations and agreements are the responsibility of the exhibiting manufacturer and the builder.

The list is open to exhibitors of the 2019 SEMA Show only. To be included in the list, complete the form.

Exhibitors: Each submission will appear on a first-come, first-served basis. As participation increases, all submissions will also be archived on www.SEMAShow.com.

Note: For verification purposes, the Project-Vehicle Builders form must be used to participate in the program; email submissions will not be included in the list. Participation in the list does not guarantee product or vehicle placement at the 2019 SEMA Show.

View the Products for Project-Vehicle Builders list.

By SEMA Editors

Exhibitors of the 2019 SEMA Show can expand their reach, product exposure and Show-floor presence by offering products to builders through the Products for Project-Vehicle Builders list.

Exhibitors of the 2019 SEMA Show are invited to expand their reach, product exposure and Show-floor presence by offering products to builders through the Products for Project-Vehicle Builders list. The list connects manufacturers with builders looking to create or complete a vehicle project.

The list, which will be updated in SEMA eNews, features product offers and contact information provided by confirmed SEMA Show exhibitors. Builders interested in obtaining a product use the information to contact exhibitors directly. With each project vehicle required to be supported by a current 2019 SEMA Show exhibitor, all product-placement decisions, negotiations and agreements are the responsibility of the exhibiting manufacturer and the builder.

The list is open to exhibitors of the 2019 SEMA Show only. To be included in the list, complete the form.

Exhibitors: Each submission will appear on a first-come, first-served basis. As participation increases, all submissions will also be archived on www.SEMAShow.com.

Note: For verification purposes, the Project-Vehicle Builders form must be used to participate in the program; email submissions will not be included in the list. Participation in the list does not guarantee product or vehicle placement at the 2019 SEMA Show.

View the Products for Project-Vehicle Builders list.

By SEMA Editors

Latest Jobs Added to SEMA Career Center

Are you hunting for a new job? The SEMA Career Center has a comprehensive listing of automotive-related job openings around the country. Here are some of the latest jobs posted to the website.

Digital Marketing Manager
National Speed is hiring a digital marketing manager to drive inbound leads to National Speed Performance consultants at all National Speed locations. This is done by writing and managing email marketing, website content and other digital marketing campaigns. This position will be responsible for developing the digital marketing plan intended to grow key performance indicators, increase brand awareness and maximize revenue for store locations. Candidates must have general performance automotive technical acumen and a bachelor’s degree in communications, marketing, advertising, public relations, media studies, business and/or related fields.

B2B Inside Sales Representative
HPS Performance Products is hiring a B2B inside sales representative to play a fundamental role in achieving the company’s customer acquisition and revenue growth objectives. Candidates must be comfortable making dozens of calls per day, working with channel partners, generating interest, qualifying prospects and closing sales. A college degree or equivalent, basic automotive mechanical knowledge and proven inside sales experience are required.

Motorsports Mechanic
Canepa is hiring a motorsports mechanic with a broad knowledge base of all mechanical aspects of a vehicle, from suspension and brakes to engine and transmission. Candidates must have experience in IMSA sports cars, GTP and GT, Trans-Am, WEC or equivalent racing background. Must be highly versatile with superior skills and be able to produce work of the highest quality. Candidates should have exceptional diagnostic ability along with race preparation experience.

Following are dates and locations for several upcoming SEMA-sponsored shows, measuring sessions and activities.

• SEMA Measuring Session: ’20 Ford Escape, August 13, 2019, SEMA Garage, Diamond Bar, CA
• YEN General Membership Call, August 21, 2019
• SBN Gear-up Girl Networking Event, September 12, 2019, NASCAR Technical Institute, Mooresville, North Carolina
• YEN General Membership Call, October 16, 2019
• YEN Meetup Formula DRIFT, October 18, 2019, Irwindale Event Center, Irwindale, California
• 3D Printing in the Automotive Industry: How It Will Benefit Your Business, November 4, 2019, Las Vegas Convention Center, Las Vegas
• SEMA Launch Pad: Entrepreneurs Pitch Their Ideas, November 4, 2019, Westgate Theater, Las Vegas
• Gear-up Girl Networking Event, Powered by SBN, November 4, 2019, Las Vegas Convention Center, Las Vegas
• YEN Top Golf General Membership Meeting, November 4, 2019, Top Golf, Las Vegas
• Racing and Performance Forum: Keeping Technology at the Forefront, November 5, 2019, Las Vegas Convention Center, Las Vegas
• YEN Reception, November 5, 2019, Westgate Las Vegas Resort & Casino, Paradise Center, Las Vegas
• 2019 SEMA Show, November 5–8, 2019, Las Vegas Convention Center, Las Vegas
• Advanced Vehicle Technology: Practice, Policy and Challenges, November 6, 2019, Las Vegas Convention Center, Las Vegas
• Automotive 4.0: New Technologies, New Opportunities, November 6, 2019, Las Vegas Convention Center, Las Vegas
• SBN Reception, November 6, 2019, Westgate Las Vegas Resort & Casino, Las Vegas
• Advanced Driver Assistance Systems (ADAS) Forum: Next-Gen Safety Performance, November 7, 2019, Las Vegas Convention Center, Las Vegas
• 2019 Advanced Engineering Technology Conference, December 10–11, 2019, Indiana Convention Center, Indianapolis
• YEN Meetup at PRI, December 12, 2019, Indiana Convention Center, Indianapolis
• 2019 PRI Trade Show, December 12–14, 2019, Indiana Convention Center, Indianapolis
• YEN General Membership Call, January 15, 2020
• SBN Biannual General Membership Call, February 4, 2020
• 2020 SEMA Middle East Business Development Conference, March 31–April 5, 2020, Abu Dhabi, United Arab Emirates
• YEN General Membership Call, April 15, 2020

For association-related travel, contact Manya Petropaki (manya.p@travelstore.com) at Travel Store USA, 949-930-9268.

By SEMA Editors

SEMA eNews highlights SEMA-member companies’ websites weekly through the Hot Links to Cool Sites section. SEMA members: To be included in Hot Links to Cool Sites, email your company name and website to enews@sema.org. Note: Make sure to include “Hot Links” in the subject line of the email.

• B&W Hitches
• Centerforce
• Doug’s Headers
• DTech
• Exedy
• Focus Auto Design Inc.
• Hooker
• JBA Racing Headers
• Luverne Truck Equipment
• Melling Engine Parts

Registration for the 2019 SEMA Show is open.

Booth space is still available for the 2019 SEMA Show, November 5–8, in Las Vegas.

Booth space is still available for the 2019 SEMA Show, November 5–8, in Las Vegas.

SEMA-member companies have posted several new listings for job opportunities in the Classifieds page of SEMA.org.

By Rachel Tatum

The “SEMA Battle of the Builders” TV special re-airs Friday, August 16, on MotorTrend TV.

Mark your calendars. Set your DVRs. The “SEMA Battle of the Builders” TV special re-airs Friday, August 16, on MotorTrend TV.

The one-hour program takes viewers behind the scenes of the 2018 SEMA Show, with industry hosts Tanner Foust and Adrienne “AJ” Janic as they follow the 2018 SEMA Battle of the Builders competition.

The competition, which features some of the world's best vehicle builders, honors and recognizes the talent and craftsmanship of those with vehicles displayed at the 2018 SEMA Show. To tune in, check your local cable or satellite providers for times and details, or visit www.semashow.com/botb.

Visit the SEMA Show YouTube Channel for more Battle of the Builder interviews, and subscribe so you don’t miss new videos leading up to the 2019 SEMA Show.