SEMA News - November 2010

With the Google/Verizon Deal, Your Website Could Be Dumped Into a “Slow Load” Zone

By Joe Dysart

	A court defanged the Federal Communications Commission on Net Neutrality, finding that the agency had no authority to impose Net Neutrality regulations.

Google’s recent move to forsake Net Neutrality—the premise that all content on the web should be distributed even- handedly—threatens to have serious consequences for specialty-equipment industry websites, especially if other titans of the Internet follow suit. Slower-loading industry websites and bidding wars for preferential treatment from Internet service providers (ISPs) could become a sobering new reality for auto-parts businesses as the Internet’s current democratization gives way to enhanced service for those with the deepest pockets.

“This is completely unfair and would hurt smaller content providers (such as small-business websites) who didn’t have the resources to pay the fees,” said John M. Simpson, director of the Inside Google Project for Consumer Watchdog. “Content would be dominated by mega-corporations, much like cable television is today.”

Google has countered that its move to abandon Net Neutrality is a necessary “compromise” it needed to make with its ISP partner Verizon, which has long loathed Net Neutrality and which also promotes Google’s Android operating system on its Verizon phones. Essentially, ISPs, such as Verizon, have long complained that a concept such as Net Neutrality makes it impossible for them to charge higher rates for people and companies that consume more bandwidth than others. For example, someone’s grandmother, who sends e-mails to her grandkids a few times a week, shouldn’t have to pay the same rate as the movie fanatic next door, who is downloading bandwidth-hogging, feature-length films to a hard drive the size of a treasure chest all day, every day.

But critics of the new Google/Verizon alliance said that the companies’ joint proposal to take a pass on Net Neutrality when it comes to the wireless Internet will essentially, over time, transform a few giant companies into landlords of
the Internet.

“The Google-Verizon deal contains no protections for wireless access, which accounts for nearly one-third of all Internet connections, giving Verizon and other ISPs the green light to block or degrade content on their wireless networks,” said
S. Derek Turner, a research director at Free Press. “In addition, it would allow Internet service providers to discriminate online by offering private Internet services alongside those on the ‘public’ Internet.”

The threat is especially urgent, Google critics said, because there is currently no governmental body that has the authority to prevent what Google and Verizon have called a ‘proposal’ from morphing into an everyday business practice. The reason? While the Federal Communications Commission (FCC) has historically been the entity to regulate the Internet when it comes to Net Neutrality, a District of Columbia U.S. Court of Appeals decided in April that the agency has no legal authority to impose Net Neutrality regulations.

In a phrase, there are all sorts of people with all sorts of opinions about Net Neutrality, but there’s no one driving the car in terms of regulations right now. In the near future, fierce public backlash against a web devoid of Net Neutrality—which would divide itself into a collection of upscale gated communities alongside blighted digital ghettos—is keeping the wolf at bay, Google critics said. But critics fear that without government intervention your auto-parts business could be negatively impacted in the long term in the following ways:

• Some content providers, such as video-sharing sites, would be able to pay an added fee to ensure that their videos download faster on the wireless Internet than other videos. In practice, this could mean that videos from YouTube (a Google-owned company), for example, would download quicker than, say, the promotional videos you have on your specialty-equipment website. “This would clearly be possible on the wireless Internet under the Google-Verizon proposal,” said Consumer Watchdog’s Simpson. “I think, indeed, that the deal would allow for some paid premium services on the wired Internet as well.”
• Some businesses might have the opportunity to pay a premium fee on the wireless Internet to ensure that their websites download faster than the websites of other, non-fee-paying businesses in the same industry. “This is unfair and would limit competition and consumer choice,” Simpson said. “Consider the implications of Google being able to pay for its search service to download faster than Bing’s search service.”
• Competitors in the same industry, including the specialty-equipment industry, could ultimately be forced into a bidding war for the fastest website download times on the wireless Internet. This bidding war would mirror the war that currently rages every day among businesses that bid on Google keywords, which lead searchers to sponsored links. “This is unfair in that it would give preference to a few of the wealthiest, largest companies,” Simpson said. “The Internet was supposed to provide open access to all comers, treating all data the same.”
• Some company websites could simply be closed out of the fast lane on the wireless Internet due to private deals struck between mega-ISPs and their preferred customers. Your ISP, for example, may decide against granting download access to a company such as SalesForce.com after cutting a deal with a competitor that offered a similar service on the web. As another example, “Verizon could offer only Google’s search,” Simpson said. “The Internet was meant to be open to all equally. This violates that basic principle and is clearly unfair.”
• Some companies could be forced to pay an added fee on the wireless Internet if they wanted to add new services to their websites in future years. Fifteen years ago, for example, adding easily downloadable video on a website was virtually unimaginable. Now, a 10-year-old kid with a cell phone can do it between lollipop licks. If the Google/Verizon proposal was in effect 15 years ago, we could all be paying extra for the privilege of offering video on our websites. “This is one of the most damaging aspects of the Google-Verizon deal,” Simpson said. “New charges could be added for heretofore unimagined services. Clearly, this unfairly thwarts innovation—or, at the least, limits ‘innovation’ to only those who can afford to pay. This is tremendously damaging to new start-up enterprises, the real incubators of true innovation.”
• Some company websites on the wireless Internet could begin to see fewer hits, as ever-rising Internet connection fees for consumers and business users—such as the ever-rising fees we now all pay for cable—begin limiting the number of users freely surfing the web. “This is exactly the danger,” said Simpson. 

Joe Dysart is an Internet speaker and business consultant based in Manhattan, New York.
Voice: 646/233-4089
E-mail: joe@joedysart.com
Website: www.joedysart.com

SEMA News - November 2010

Builder’s-Race Pinewood Cars to Be Auctioned for Charity

By Chad Simon

Photography By Darryl Dennis

All of the custom-designed pinewood cars from the Builder’s Race—part of the annual HRIA-sponsored Pinewood Drag Races that were held in conjunction with SEMA’s Leadership Days on Saturday, July 24, 2010, in Pasadena, California—will be autographed by the builders and displayed at the 2010 SEMA Show. They will then be bid on for auction via eBay, and the proceeds will go to children’s charities Childhelp and Victory Junction Gang Camp.

The competition in the Builder’s Race pitted 20 professional, well-known hot-rod builders against one another. They were given four months to complete their build with no design limitations or rules except that the car had to fit the track’s dimensions and no propulsion systems were allowed.

Alan Johnson’s Hot Rods and Pinkee’s Rod Shop created its hot rods from billet aluminum, while Rich Evans Designs and Street Vizions went with a more traditional wooden approach. Other builders looked for loopholes in the rules, as Rob Ida Concepts and Cotati Speed Shop entered hot rods with only three wheels.

Rich Evans Designs		Derrick White, Street Vizions		Rob Ida Concepts
Art Morrison		Alan Johnson’s Hot Rods		Hot Rods & Custom Stuff
Carl’s Custom Cars		Cotati Speed Shop		Boerne Stage Customs
Pinkee’s Rod Shop		Clay Smith Cams		Fesler Built

The cars built by Clay Smith Cams and Carl’s Custom Cars embodied the spirit of traditional hot rods, while Boerne Stage Kustoms paid tribute to the land-speed bullets of the past. Builders from Hot Rods & Custom Stuff and Fesler Built showcased their paint skills, and Art Morrison engineered the most unique and advanced pinewood car in the race, fabricating an actual chassis and suspension along with ball-bearing wheels.

But it was Derrick White of Street Vizions who captured the HRIA Cup by leaving all the other entrants in the dust with his traditional hot-rod pinewood car.

Eric Saltrick, vice president of marketing for Steele Rubber Products and an HRIA member, has been involved in the Pinewood Drag Races since their inception in 2008 and coordinated the hot-rod builder event. “Everything was shrouded in secrecy,” Saltrick said. “One of the builders showed up with his car inside a locked briefcase. We didn’t see any of the cars until the day of the race.”

The Builder’s Race came to fruition at last year’s SEMA Show when Saltrick and fellow HRIA members Rick Love of Vintage Air and John Menzler of Comp Performance Group decided to walk the Show floor and ask every well-known hot-rod builder to participate in the event.

“They all jumped at the opportunity,” Saltrick said. “We wanted to get the hot-rod community involved, and we have many hot-rod builders lined up to do it again next year. We’ve also got young builders involved to help give them some exposure.”  

SEMA News - November 2010

Builder’s-Race Pinewood Cars to Be Auctioned for Charity

By Chad Simon

Photography By Darryl Dennis

All of the custom-designed pinewood cars from the Builder’s Race—part of the annual HRIA-sponsored Pinewood Drag Races that were held in conjunction with SEMA’s Leadership Days on Saturday, July 24, 2010, in Pasadena, California—will be autographed by the builders and displayed at the 2010 SEMA Show. They will then be bid on for auction via eBay, and the proceeds will go to children’s charities Childhelp and Victory Junction Gang Camp.

The competition in the Builder’s Race pitted 20 professional, well-known hot-rod builders against one another. They were given four months to complete their build with no design limitations or rules except that the car had to fit the track’s dimensions and no propulsion systems were allowed.

Alan Johnson’s Hot Rods and Pinkee’s Rod Shop created its hot rods from billet aluminum, while Rich Evans Designs and Street Vizions went with a more traditional wooden approach. Other builders looked for loopholes in the rules, as Rob Ida Concepts and Cotati Speed Shop entered hot rods with only three wheels.

Rich Evans Designs		Derrick White, Street Vizions		Rob Ida Concepts
Art Morrison		Alan Johnson’s Hot Rods		Hot Rods & Custom Stuff
Carl’s Custom Cars		Cotati Speed Shop		Boerne Stage Customs
Pinkee’s Rod Shop		Clay Smith Cams		Fesler Built

The cars built by Clay Smith Cams and Carl’s Custom Cars embodied the spirit of traditional hot rods, while Boerne Stage Kustoms paid tribute to the land-speed bullets of the past. Builders from Hot Rods & Custom Stuff and Fesler Built showcased their paint skills, and Art Morrison engineered the most unique and advanced pinewood car in the race, fabricating an actual chassis and suspension along with ball-bearing wheels.

But it was Derrick White of Street Vizions who captured the HRIA Cup by leaving all the other entrants in the dust with his traditional hot-rod pinewood car.

Eric Saltrick, vice president of marketing for Steele Rubber Products and an HRIA member, has been involved in the Pinewood Drag Races since their inception in 2008 and coordinated the hot-rod builder event. “Everything was shrouded in secrecy,” Saltrick said. “One of the builders showed up with his car inside a locked briefcase. We didn’t see any of the cars until the day of the race.”

The Builder’s Race came to fruition at last year’s SEMA Show when Saltrick and fellow HRIA members Rick Love of Vintage Air and John Menzler of Comp Performance Group decided to walk the Show floor and ask every well-known hot-rod builder to participate in the event.

“They all jumped at the opportunity,” Saltrick said. “We wanted to get the hot-rod community involved, and we have many hot-rod builders lined up to do it again next year. We’ve also got young builders involved to help give them some exposure.”  

	Catch a free ride in a Camaro Firebreather "Top Gear" taxi at the Las Vegas Convention Center during the SEMA Show.

To celebrate the arrival of the new U.S. version of "Top Gear," the History channel will be hosting a private sneak preview of the series at the 2010 SEMA Show. The screening is scheduled for Wednesday, November 3, at 6:00 p.m. at the Las Vegas Hilton Theater.

The History channel has a limited number of passes remaining, which they are offering to SEMA exhibitors. If you are interested in receiving two free passes, please send an e-mail with your full name and e-mail address to topgear@cegny.com. Requests must be received no later than Monday, November 1, 2010.

Tickets will be awarded on a first-come, first-served basis. The "Top Gear" team will alert lucky winners by e-mail on November 2, 2010, with instructions for picking up tickets.

The History Channel is also bringing a fleet of "Top Gear" taxis to the 2010 SEMA Show. So catch a free ride in a Camaro Firebreather, Ferrari 458 Italia or another "Top Gear" taxi waiting for you at the Convention Center exit.

The show will premiere on the History channel November 21 at 10:00 p.m.

	Catch a free ride in a Camaro Firebreather "Top Gear" taxi at the Las Vegas Convention Center during the SEMA Show.

To celebrate the arrival of the new U.S. version of "Top Gear," the History channel will be hosting a private sneak preview of the series at the 2010 SEMA Show. The screening is scheduled for Wednesday, November 3, at 6:00 p.m. at the Las Vegas Hilton Theater.

The History channel has a limited number of passes remaining, which they are offering to SEMA exhibitors. If you are interested in receiving two free passes, please send an e-mail with your full name and e-mail address to topgear@cegny.com. Requests must be received no later than Monday, November 1, 2010.

Tickets will be awarded on a first-come, first-served basis. The "Top Gear" team will alert lucky winners by e-mail on November 2, 2010, with instructions for picking up tickets.

The History Channel is also bringing a fleet of "Top Gear" taxis to the 2010 SEMA Show. So catch a free ride in a Camaro Firebreather, Ferrari 458 Italia or another "Top Gear" taxi waiting for you at the Convention Center exit.

The show will premiere on the History channel November 21 at 10:00 p.m.

	The WD-40/SEMA Cares Mustang will be introduced in the SEMA Grand Lobby at the Las Vegas Convention Center and at a press conference Wednesday, November 3.

Excitement continues to build around the WD-40/SEMA Cares Mustang’s introduction at the 2010 SEMA Show, and now the build is finally complete. The Mustang made recent stops at Audio Innovations to install Polk Audio equipment, Katzkin for custom interior seats and L&G Enterprises for paint touch-ups before its final installation—a Paxton supercharger.

“We are so pleased for the opportunity to join our two established brands, WD-40 and Paxton superchargers, both of which have provided consumers with product excellence for more that 50 years,” said Gil Cormaci, director of sales and marketing for Paxton Automotive. “We actually used WD-40 to lubricate the silicone couplers used to join tubing within our supercharger systems, which allows the couplers to slide easily on and off the aluminum piece and a tacky film to develop, securing the connection.”

Don’t miss the introduction of the WD-40/SEMA Cares Mustang in the SEMA Grand Lobby, or stop by the WD-40/SEMA Cares press conference (at the vehicle) at 12:00 p.m. on Wednesday, November 3, to hear from WD-40 President and CEO Garry Ridge and other partners about this year’s build. Proceeds from the vehicle’s auction at Barrett-Jackson will go to Childhelp and Victory Junction Gang Camp children’s charities.

	The WD-40/SEMA Cares Mustang will be introduced in the SEMA Grand Lobby at the Las Vegas Convention Center and at a press conference Wednesday, November 3.

Excitement continues to build around the WD-40/SEMA Cares Mustang’s introduction at the 2010 SEMA Show, and now the build is finally complete. The Mustang made recent stops at Audio Innovations to install Polk Audio equipment, Katzkin for custom interior seats and L&G Enterprises for paint touch-ups before its final installation—a Paxton supercharger.

“We are so pleased for the opportunity to join our two established brands, WD-40 and Paxton superchargers, both of which have provided consumers with product excellence for more that 50 years,” said Gil Cormaci, director of sales and marketing for Paxton Automotive. “We actually used WD-40 to lubricate the silicone couplers used to join tubing within our supercharger systems, which allows the couplers to slide easily on and off the aluminum piece and a tacky film to develop, securing the connection.”

Don’t miss the introduction of the WD-40/SEMA Cares Mustang in the SEMA Grand Lobby, or stop by the WD-40/SEMA Cares press conference (at the vehicle) at 12:00 p.m. on Wednesday, November 3, to hear from WD-40 President and CEO Garry Ridge and other partners about this year’s build. Proceeds from the vehicle’s auction at Barrett-Jackson will go to Childhelp and Victory Junction Gang Camp children’s charities.

Following are dates and locations for several upcoming SEMA-sponsored shows, webinars and activities. Click on an item for more details.

SEMA Show exhibitors: Generate more buzz for your company and its products at the 2010 SEMA Show by offering products to builders through the SEMA Products for Project-Vehicle Builders list. NOTE: The list is reserved for exhibitors of the 2010 SEMA Show.

From now until just days before the 2010 Show, the latest additions to this list are made available through SEMA eNews. Hundreds of builders access the list looking for the pieces to complete their builds. Product-placement opportunities such as this are so beneficial that many exhibitors offer products for free or at a greatly reduced rate.

To place your product on the list, send your company name, a brief product description, contact information and a website where the products can be viewed to eNews@sema.org and put “Product List” in the e-mail subject line.

Remember, builders will contact you directly, so make sure your contact information is accurate. New submissions will be included each week when available.

Here are the most recent additions to the list:

Engine/Underhood Components

D.C. Power Engineering: Charging systems for hot rods, passenger cars, performance and racing, trucks and SUVs. From stock replacement upgrades to most efficient high-output alternators on the planet, D.C. Power finally has the charging system solution you're looking for. Contact: Dave Baird, Robbie Henstrom, Kyle Cannon, 951/509-5617. E-mail: sales@dcpowerinc.com. Website: www.dcpowerinc.com.

Exterior Products/Accessories

AMP Research: PowerStep electric-powered running boards, BedStep bumper steps and Bed X-Tender truck-bed extenders available for approved SEMA projects. Contact Mark Wronski, mark@amp-research.com, 949/221-4185. Website: www.amp-research.com.

Drake Muscle Cars: Limited supply of parts and accessories for the 2005 and up Ford Mustang and 2008 and up Dodge Challenger vehicles. Products include interior, exterior, performance parts and accessories. For catalog information, visit www.drakemusclecars.com or www.scottdrake.net to search for products. Contact: Christina Briseno, cbriseno@scottdrake.net, 800/999-0289, ext. 2103.

Drake Off Road: Limited supply of parts and accessories for the Jeep JK & TJ, Toyota FJ Cruiser and Hummer vehicles. Products include interior, exterior parts and accessories. For catalog information, visit www.drakeoffroad.com. Contact: Christina Briseno, cbriseno@scottdrake.net, 800/999-0289, ext. 2103.

Innovative Vehicle Solutions: New line of OE quality rear vision systems. Systems are available for Ford F-150, Dodge Ram and fullsize GM SUVs. Contact: The systems are not yet on the IVS website, so contact Adam Moore at amoore@ivsauto.com for more information. Website: www.ivsauto.com.

Invis-A-Rack LLC: Truck cargo/utility racks that mount with an integrated clamp system with no drilling required. Contact: Donny McCall, donny@invisarack.com, 336/372-6700. Website: www.invisarack.com.

Romik: Running boards, max bars and bull bars for all trucks (American, Asian or European). Contact: Hugo Baeza, HugoB@Romik.com, 610/395-5540. Website: www.romik.com.

Steelmate USA: Parking assist systems, more than 50 models and applications for all vehicle types. Systems are available in two-, four-, six- and eight-sensor configurations for both front and rear installations. Units start from basic audible "beep" systems and add visual and VOICE prompts. The top-of-the-line units feature video overlay on the picture from the backup camera with distance and object location shown on the screen as an overlay. Contact: John Lombard, jlombard@steelmateusa.com. Website: www.steelmateusa.com.

Vision Autodynamics Inc.: VFIBER line of are kits (ground effects/ body kits). Vast variety of exterior replacement or add-on bumpers, side skirts, rear bumpers, wings and more. Contact: Patrick@VFiber.com. Website: www.VisionAutodynamics.com.

Vortex Mud Guards: Fitments available for any pick-up, SUV, exotic sports car, luxury sedan and tuner. Contact: Derek Birk, 620/340-8505, dbirk@hopkinsmfg.com.

Powersports Products

Interparts Industries: ATV/UTV Axles – Fully assembled outboard and inboard joints installed on a 4340 chrome-moly steel axle bar. All internal precision-ground components are assemble using high-temperature, high load bearing moly grease. Contact: Rick Haffner, richardh@interparts.com, 800/222-7022, Website: www.interparts.com.

Suspension/Brake Components

Granatelli Motor Sports: Offers all suspension components for 1979–2011 Mustangs with a V6 or V8 engine. Contact: Joe Granatelli, jrgranatelli@granatellimotorsports.com, 805/486-6644. Website: www.granatellimotorsports.com.

Other Products, Accessories & Services

Sell in a Minute Corporation: Record your special vehicle build with video. Sell in a Minute Corporation's "Video Garage" can be linked to your site so that you can manage and administer your own videos. If you're building the vehicle for a client, you can send links specific to each video as the build progresses. Check out an example at www.sellinaminute.com/elcamino. Contact: Randy Wallman, rwallman@sellinaminute.com, 509/995-9711.

Here are the previous additions to the list:

Engine/Underhood Components

aFe - advanced FLOW engineering: High-performance air filters, air intake systems, exhaust systems, manifolds and intercoolers for late-model car, SUV and powersport applications. All aFe product categories are available for approved SEMA projects. Contact: Jason Bruce, jbruce@afepower.com, 951/493-7147. Website: www.afepower.com.

AIRAID Filter Company: Full line of cold air intakes, replacement filters and PowerAid throttle body spacers. Available for most trucks, SUVs and many new musclecars (Camaro, Charger, Challenger, Corvette and 2011 Mustang). Contact Brian Paravicini, brian@airaid.com, 800/498-6951, ext. 724. Website: www.airaid.com.

AEM Induction: Full line of high-performance air intake systems and air filters for sport/compacts, modern-day musclecars, trucks and SUVs. Gas and diesel applications available. Contact: Lucio Tapia luciot@aemintakes.com.
Website: www.aemintakes.com.

AMSOIL: Premium synthetic lubricants and filters for select car builders. If you have a vehicle going to SEMA for a booth display, contact us today with your specs. You may be eligible for free AMSOIL products for your booth display vehicle. Contact: Jamie, info@amsoil.com, 715/399-6557. Website: www.AMSOIL.com.

ANSA: Silverline exhaust products. Performance stainless steel exhaust systems and stacks for light-duty diesel pickups. Exhaust systems for European exotics and proto-typing for project and custom cars. Contact: Robert Diotte, bobd@ansaautomotive.com. Website: www.Ansaautomotive.com.

Ansen USA: Valve covers, air cleaners and breathers. Contact: Ariel Rider, Ariel@ansenusa.com, 310/534-1837. Website: www.AnsenUsa.com.

ATS Diesel: Performance products for diesel trucks. Contact: Matt Bozarth, matt@atsdiesel.com, 866/408-7916. Website: www.atsdiesel.com/SEMA.

Bully Dog Technologies: WatchDog and GT tuners for gas and diesel cars, trucks and SUVs. The GT adds power and economy and drive train and vehicle tuning/adjustability in one unit. The WatchDog also serves as a multi-function digital gauge, diagnostic tool and performance tester. Also offering enclosed cold air intakes for gas and diesel trucks. Contact: Mike DeFord, mike@bullydog.com, 208/226-2500. Website: www.bullydog.com.

CFMPlus LLC: Intake manifolds for Dodge 5.9L and Ford 6.0L/7.3L diesel trucks. Contact: John Moore, 760/598-2478, ext. 1. Website: www.cfmplus.com.

DeatschWerks: High-flow, high-performance, drop-in fitment fuel injectors offered in flow-matched sets. Contact: David Deatsch, 405/217-0701. Website: www.deatschwerks.com.

Dynojet Research: Automotive performance products (piggyback EMS) for select vehicles. The CMD is designed to optimize the power of your OEM forced induction vehicle while retaining the factory engine management system and allows the user to precisely alter the fuel and boost, working in parallel with OBD2. Also available, the universal Wideband 2 air/fuel ratio monitor with gauge. Check the website for available vehicle applications. Contact: Keith Lockliear, klockliear@dynojet.com, 800/992-4993. Website: www.dynojetcmd.com.

DynoMax Performance Exhaust: DynoMax Performance Exhaust dyno-proven, power-enhancing exhaust systems and components and a complete line-up of mufflers for a full range of domestic and import passenger cars, light trucks, Jeeps and SUVs. Contact: Christine Bowser, chrissy@pinnmedia.com, 330/688-3515.

Eaton: Eaton Aeroquip Performance AQP and StartLite hose, fittings and adapters for hot rods, race cars, light trucks and musclecars. Contact: Beth Mooney, bethmmooney@eaton.com, 419/891-7619. Website: www.eaton.com/aeroquipperformance.

Flowmaster Inc.: Complete exhaust systems and individual Flowmaster and Hushpower mufflers. Contact Cam Benty, cam.benty@flowmastermufflers.com, 707/694-1863.

Gibson Performance Exhaust: Performance stainless steel and aluminized exhaust and street legal headers in chrome, stainless steel and ceramic. Contact: Robert, Gibsonperformance1@gibsonperformance.com, 800/528-3044, ext.112, or visit www.gibsonexhaust.com/sponsorship for the sponsorship form. Website: www.Gibsonperformance.com.

HP Tuners: Chips and tuning. If your SEMA project needs tuning, HP Tuners wants to help you out. Contact Jay Payson, Jay@HPTuners.com. Website: www.HPTuners.com.

Injen Technology: Late-model performance products for 2011 SEMA project vehicles. Complete line of "tuned" intakes that incorporate MR Technology and Air Fusion to provide - "The World's First Tuned Air Intake System". Contact: Ed Rossi, ed@injen.com, 909/839-0706, 909/839-0427 (fax). Website: www.injen.com.

Innovate Motorsports: OT-2—a simple device that wirelessly connects your iPhone, iPod Touch or PC to your OBDII compliant vehicle. When used with the free Logworks Mobile app, the OT-2 transforms your iPhone/iPod Touch into a wireless gauge, OBDII Scan Tool, Data Logger, Dyno and performance meter and efficiency meter. Contact: Sean Crawford, scrawford@doverpmi.com, 714/372-5910, ext. 4273. Website: www.ot-2.com.

JET Performance Products: Offers performance tuning products, including performance programmers, performance modules, throttle body spacers and V-Force Plus. Contact: Dan Nicholas, dan@powerbyjet.com, 800/535-1161. Website: www.jetchip.com.

K&N Engineering Inc.: High-flow intake systems, OE replacement air filters and high-performance oil filters for most vehicles and powersports applications. Contact: Lucio Tapia, luciot@knfilters.com, 951/826-4000, ext. 4350. Website: www.knfilters.com.

Lawson Industries: Insynerator performance mufflers, MaxFlo performance mufflers, Bullit, TurboMax turbo mufflers, Lawson premium tubing, LXP Chrome, Stainless and Midnight Series exhaust tips. Contact: Frank Lamb, FrankL@LawsonIndustries.com, 800/529-7664. Website: www.LawsonIndustries.com.

Linear Logic: ScanGaugeII compact, multifunction automotive computer. It is a trip computer, digital gauges (four simultaneous) and also a scan tool for reading and clearing trouble codes. Contact Joey Snyder, joey.snyder@linear-logic.com, 888/433-5664. Website: www.scangauge.com.

Maradyne High Performance Fans: High-performance electric cooling fans with sealed motors. Molded from glass filled nylon, single- and dual-shrouded fans available. Contact: Susan Robinson, 817/428-3636, ext. 655. Website: www.maradynehp.com.

Moroso Performance Products and Competition Engineering: Moroso and its chassis company, Competition Engineering, has more than 3,500 products, including: oil pans, dry sump pumps/tanks, aluminum coolant/supercharger tanks, ignition wires, distributors, valve covers, tanks, accumulators, traction devices, shocks, roll bars, back half kits, tools and more. Contact: Thor Schroeder, thors@moroso.com, website: www.moroso.com, www.competitionengineering.com.

ODYSSEY Battery by EnerSys: Sealed, drycell batteries that provide superior cranking power, guaranteed longer service life, deep discharge recovery, vibration resistance and mounting flexibility. We complement these batteries with our line of ODYSSEY Ultimizer Chargers. Contact: April Tomalis, april.tomalis@enersys.com.

Painless Performance Products: Dual fan controllers, dual battery controller, vehicle convenience module, fuel injection harnesses, integrated fuel injection/chassis harnesses, chassis harnesses. Specific models of interest to Painless: Digital Power Manager (Dual Battery Controller, part # 40120); Painless Convenience Module (part # 63040); Perfect Flow Fuel Delivery System (part # 65100); F5 Dual Fan Controller (part # 30140); F5 Single Fan Controller (part # 30141); Integrated LS1-4L60E EFI and 26 Circuit Chassis Harness (part # 60608); Integrated GM Gen III 4.8, 5.3, 6.0L – 4L60E EFI and 26-Circuit Chassis Harness (part # 60617); 2003-06 GM Gen III 4.8, 5.3, 6.0L Electronic Throttle– 4L60E Fuel Injection Harness (part # 60221); 1997-04 GM LS1 Electronic Throttle – 4L60E Fuel Injection Harness (part # 60522); 2006-08 GM LS2, LS3, LS7 Electronic Throttle– 4L60#, 4L65E, Manual Transmission Fuel Injection Harness (part # 60524). Contact: Gary W. Wright, 817/244-6212, ext. 1026. Website: www.painlessperformance.com.

PerTronix Inc.: Performance ignition products—distributors, coils, spark plug wires. Doug's Headers—Exhaust headers for musclecars, and trucks; electronic exhaust cut outs. Patriot Exhaust Products—Exhaust headers for street rods, musclecars and trucks, Smithy Mufflers, VaraFlow tunable mufflers, side pipes and exhaust products. JBA Performance Exhaust—Exhaust headers and performance exhaust systems for classic and late-model performance cars. Contact: Don Lindfors, dlindfords@pertronix.com. Websites: www.pertronix.com; www.dougsheaders.com; www.patriotexhaust.com; www.jbaexhaust.com.

ProCharger (ATI): Superchargers and complete intercooled supercharger systems. Contact Cary Pangrac, cpangrac@procharger.com. Website: www.procharger.com.

Pypes Performance Exhaust: Wide variety of stainless steel exhaust products for classic, muscle and late-model performance vehicles. Diesel exhaust and stacks also available. Contact Mike Zimmerman, mikez@pypesexhaust.com.

Pure Power! Lifetime Oil, Fuel and Transmission Filters: Cleanable billet and stainless steel lifetime filters offers green plus performance in more than 30,000 direct spin-on applications for foreign, domestic, gasoline, diesel, bio-diesel engines ranging from motorcycles to big-rigs. Drop-in cartridge and remote designs are also available. Contact: Fran Cyrus, fran@gopurepower.com, 800/750-0827. Website: www.GoPurePower.com.

Sebring Tuning Exhaust: High-polished performance T304 stainless steel universal exhaust components. Complete line of mufflers, tips, inline resonators and flex joints with two- to four-inch internals for cars, trucks, SUVS, hot rods, off-road vehicles and bolt-on fabrication. Contact Sandy Cook: jcrsandy@aol.com, 562/431-4605. Website: www.sebringtuning.com.

SLP Performance Parts Inc.: Performance and appearance products for late-model musclecars and GM Trucks and SUVs. Contact: Kevin Woodruff, kwoodruff@slpnj.com, 732/349-2109. Website: www.slponline.com; www.slponline.com/slp_sema_show.asp.

Spectre Performance: High-performance air intake systems, air filters and chrome engine detailing accessories for musclecars and modern-day musclecars, trucks and SUVs. Contact: Julie Wright, juliew@spectreperformance.com, 909/673-9800. Website: www.spectreperformance.com.

Superchips Inc.: Flashpaq performance programmer—high-performance, hand-held tuners for most Ford, GM, Dodge/Chrysler, Nissan and Jeep applications. Tuning available for high-performance, heavy load, off-road, fuel economy and diesel racing. Contact: Brian Fletcher, bfletcher@superchips.com, 407/585-7000. Website: www.superchips.com.

TechAFX: Underhood, engine dress-up products for 2010 and later V8-powered Camaros—the Hose Relo kit, EVAP Hider Hose and more—that release the true beauty of the LS V8 engine. Contact: Larry Filipczak, larry@techafx.com, 248/925-8314. Website: www.techafx.com.

Thrush Exhaust: Wide range of header-back exhaust systems for musclecars, a complete array of stainless steel mufflers and several options of its legendary red hot Glasspack mufflers. Contact: Christine Bowser, chrissy@pinnmedia.com, 330/688-3515.

Wavetrac Differentials: Wavetrac limited slip differentials. Contact: Dana Clark, semashow@wavetrac.net, 949/362-8700, ext. 25. Website: www.wavetrac.net.

XS Power: High power AGM and lithium batteries for all forms of racing and high-end mobile audio and marine installations. Sealed, non-spillable, non-corrosive, vibration-resistant design. Contact: Scottie Johnson, scottie@xspowerbatteries.com, 888-4XS-POWER, ext. 1209. Website: www.4XSPOWER.com.

Exterior Products/Accessories

Advantage Truck Accessories: Advantage tonneau covers. Contact: Jeff Fink, 574/293-0979. Website: www.AdvantageTruckAccessories.com.

Al’s Liner Do-it-Yourself Coatings: Al’s Do-it-Yourself Bed Liner is an 86% solids content urethane/acrylic blend. The simple batch system allows users to apply in any color, texture or thickness and is ideal for automotive undercoating, interior sound deadening, trailer flooring and much more. Contact: Dana Mitchell, dana@alsliner.com, 800/999-6841. Website: www.alsliner.com.

Anvil Auto Inc.: 2010 Camaro side gill trim—CNC-machined, hand-polished billet aluminum bright trim that sticks to the side of 5th Gen Camaros using 3M tape; gives the new Camaro a retro look of a '69! Contact: Tyler or Manal, 888/723-8882. Website: www.anvilauto.com.

A.R.E.: Fiberglass tonneau covers and truck caps custom made to fit today’s most popular trucks. A.R.E. caps and covers are painted to match using the OEM paint code for a high-quality appearance. Contact: Casey Milano, casey@mcculloughpr.com. Website: www.4are.com.

BASF Refinish: A full range of waterborne and solvent-borne basecoat systems from Glasurit, R-M and Limco. Also a full line of custom products including Carizzma Colors, Foose Signature series, Flat Paint and Candy's. Contact: Brian Fox (Fox Marketing), brian@foxmarketing.net, 717/718-5505. Website: www.basfrefinish.com.

BedRug Inc.: Molded, closed-cell polypropylene foam bedliners. BedRug liners are durable, comfortable and versatile. Contact: Ryan Herman, rherman@bedrug.com, 734/434-3524.

Bedslide: Bedslide cargo management system offers easy access to your truck's, van's or SUV's load. Contact David McInturf for qualification sheet and to discuss your plans. Contact: David McInturf, 888/807-0099 (toll free), 541/842-2771 (direct). Website: www.bedslide.com.

BOLT Series Locks: Padlocks, receiver locks, cable locks and spare tire locks that work with the vehicle's (GM, Ford, Chrysler or Jeep) key. Contact: Erika Garcia, ggarcia@strattec.com, 414/247-3552. Website: www.BOLTlock.com.

Bridjit Curb Ramps: Designed to smooth the entry and exit from a rolled-curb driveway. Bridjit Curb Ramps are a green solution designed to help homeowners reduce the jarring and underside vehicle damage that occurs from a roll-over-curb driveway entry. Simple to install, the Bridjit Curb Ramp is made from recycled tires and is generally sold as a set of three, 4-foot modular sections. The three-piece set provides 12 feet of driveway coverage. Additional center sections can be added as needed to accommodate wider driveways. Contact: Leslie Allen, lallen@themarxgrp.com, 615/378-1198. Website: www.bridjit.com.

Brute Industries: Race Ramps are lightweight ramps and stands used to raise vehicles. They specialize in accommodating low-ground-clearance vehicles. Stylish appearance makes for dramatic display of show vehicles. Strong, lightweight and realistic appearing rocks for power sports and 4x4 displays are also available. Contact: Jonathan Light, jon@infocuspowersportsmarketing.com, 765/838-3406. Website: www.raceramps.com.

California Pony Cars: Premium-quality products for '64–'73 classic Mustangs and 2005–2011 Mustangs. Contact: Jamiel George, Jamiel@calponycars.com, 909/923-2357. Website: www.calponycars.com.

Cequent Performance Products: Towing and trailer accessories. Contact: Carol Doney, cdoney@cequentgroup.com.
Website: www.cequentgroup.com.

Correct Performance Accessories: CPX Foilers are auto-body accessories that enhance the look of any vehicle while improving aerodynamics with a low-drag coefficient and are currently available for popular retro-look performance vehicles such as the new Chevrolet Camaro, Ford Mustang and Dodge Challenger. CPX Foilers are made of high-quality impact-resistant polyurethane materials. Contact: Mike Clinger, mike@cpxusa.com, 714/538-8099. Website: www.cpxusa.com.

DiamondBack Truck Covers: Manufacturers of heavy-duty, three-panel, diamond-plate truck bed covers for the work truck and light truck accessories market. Recognized for the load-bearing HD cover, DiamondBack has introduced two new covers in 2010 designed for restyling and improved utility—The DiamondBack 180 and the DiamondBack 270. Contact: Brandon Moist, brandon@diamondbackcovers.com, 800/935-4002 ext. 22. Website: www.diamondbackcovers.com/linex/default.asp.

Directus Total Vehicle Technologies: Offers several OEM replacement rear-view mirror systems (TD-43 Touch, TD-43BT, TD-43R) that include systems with touchscreen GPS navigation, wireless Bluetooth functionality and backup camera capability. Contact: Derek Prentice, Derek@DirectusNav.com, 810/355-2266. Website: www.DirectusNav.com.

Eagle Enterprises Inc.: Striping and vinyl graphics. Contact: Wayne Casimir, 800/874-9564, 316/945-8500. Website: www.eagleict.com.

EGR Incorporated: Full line of exterior plastic accessories for trucks, SUVs and cars. Products include, but are not limited to, No Drill Fender Flares, No Drill Hood Protectors, Side WindowVisors and Bed Rail Caps. Contact: info@egrusa.com, 909/923-7075. Website: www.egrusa.com.

Extang: Extang tonneau covers. Contact: Renee Dettling, renee@extang.com, 734/434-3508. Website: www.extang.com.

Finishlinewest: Stonehenge Series hard parts for Jeeps—various products for the two- or four-door Jeep Wrangler JK. Contact: 760/885-6054, stonehengeseries@gmail.com. Website: www.stonehengeseries.com.

Go Industries Inc.: Big Tex and Rancher grille guards. Nerf bars, tailgates and rack systems. Contact: Scott Covelli, scott@goindustries.com, 800/527-4345. Website: www.goindustries.com.

Go Rhino! Products: Nerf bars, grille guards, steps, bed bars and hitch steps. Contact: Kathryn Gallagher, kathryn@gorhino.com, 888/427-4466. Website: www.gorhino.com.

Hella Inc.: Any type of auxiliary lamp. LED taillamps for F-150, Silverado, Tundra and RAM. Halogen auxiliary lamps and accessories. Contact: Scott Kornhaus, 770/631-7557, 770-631-7574 (fax). Website: www.myhellalights.com.

Husky Liners: Custom-molded floor and cargo liners—vehicle specific automotive carpet protection products; available for trucks, SUVs, cars and vans. Custom-molded mud guards—vehicle-specific applications for trucks and SUVs. Gear box, an interior vehicle storage system; vehicle-specific applications that fit under back seat of extended/crew cab trucks. Headlite Guard—vehicle specific applications, available for trucks, SUVs and cars. Husky Shield clear, paint protection film designed to protect your vehicle’s leading edge from road debris; vehicle specific-applications, available for trucks, SUVs and cars. Contact: Bennett Jackson, bjackson@huskyliners.com, 620/221-2268 Website: www.huskyliners.com.

Innovative Vehicle Solutions: Chevy Camaro 2010 and up, IVS Havoc full aero kit, consisting of lower front chin spoiler with brake cooling openings; side rockers featuring accent lines that tie-in with the front chin spoiler; aggressively styled rear spoiler; rear two-piece diffuser with a paintable outer section and optional carbon fiber hydrographics on the center section, designed to provide a performance look and hide the low hanging factory exhaust cans. All of the parts are hard tooled and made from urethane, not fiberglass. The kit was designed and developed for an OE fit and finish, with minimal install time. There is no drilling into metal, and most parts use the stock attachment locations. Note: The front chin spoiler only fits the SS models, all of the other components fit both the SS and six-cylinder models. IVS Havoc Wheels designed around the OE Staggered fitment (20 X 8 front, 20 X 9 rear); PVD coated (the new chrome); will not chip or peal and is fully validated for OE applications; available in black or bright finish; center cap bore dimension is the same as the OE wheels, so the end user can keep the heritage look with inserting the OE bowtie center caps. IVS Havoc stripe package, manufacturer and material is the same as the OE rally stripe package offered by GM; rear spoiler stripe extension allows the customer to continue the OE rally stripes onto the Havoc spoiler. IVS rear vision systems for Dodge full-size truck, Ford full-size trucks. Contact: Adam Moore, 248/298-3112. Website: www.ivsauto.com.

Little Boys Offroad Toys LLC: The GEARSAFE—a versatile, steel, lockable toolbox inconspicuously disguised as a spare tire carrier for Jeep, SUV or trailers with vertically mounted spare tires. No drilling and no welding required for factory JEEP JK applications. Vehicles with aftermarket swing away tire carriers and trailers can use the specially designed GEARSAFE mounting plate to bolt on The GEARSAFE with the enclosed hardware. The GEARSAFE comes in various diameters, widths and lug patterns. Contact: Matt Little, 866/604-8021. Website: www.thegearsafe.com.

Mile Marker Inc.: Self-recovery electric and hydraulic winches. Contact: Susanne Krentz, susannemk@milemarker.com, 800/426-8646.

Moroso Performance Products and Competition Engineering: Moroso and its chassis company, Competition Engineering, has more than 3,500 products, including: oil pans, dry sump pumps/tanks, aluminum coolant/supercharger tanks, ignition wires, distributors, valve covers, tanks, accumulators, traction devices, shocks, roll bars, back half kits, tools and more. Contact: Thor Schroeder, thors@moroso.com, website: www.moroso.com, www.competitionengineering.com.

ORACLE Lighting Technologies: SMD line of ORACLE Halo kits. New product line for ’10 Camaro platform includes SMD Halo Rings, SMD Sidemarkers, high-powered reverse lights and interior accent lighting. Contact: justin@oraclelights.com. Website: www.AACstyle.com.

Owens Products: Made in the U.S.A. custom running boards, tool boxes and UTV boxes. Contact: Kathy Knautz, kathy@owensproducts.com. Website: www.owens-pro.com.

Penda Corporation: Bedliners: Penda Skid Resistor, Pendaliner and Duraliner. Penda Venture tonneau cover. Penda Hide-A-Hook tie downs. Contact: Thyra Jean Ludwig, thyraludwig@penda.com, 608/742-5301, ext. 7838. Website: www.penda.com/automotive.

Poly Performance Inc.: High-end Jeep, truck and buggy accessories. Jeep JK Wrangler (2007–current) Synergy Suspension line and additional JK accessories. Contact: Dave Schlossberg, 805/783-2060, ext. 203. Website: www.polyperformance.com.

Räv Design: Custom design, digital printing and vinyl graphics for any car, truck or SUV. Contact: Nikki Hess, 714/743-3199. Website: www.ravdesign.com.

RealWheels Corp.: Billet, stainless steel and black trim accessories for the 2010+ Chevy Camaro. Products include grille kits, billet pedals, shift knobs, fuel doors and additional race-inspired accessories. Smart Car accessories (interior and exterior). A complete line of stainless steel accessories including bumper bars, grille kits, roll-bars and more. Billet, stainless steel and black trim accessories for the 2007+ Jeep Wrangler JK. Aggressive brushguard designs, light-grilles and taillight guards. Interior replacement pedals, shift knobs and air vents. Contact: Jhan R. Dolphin, jdolphin@realwheels.com, 800/982-1180. Website: www.realwheels.com.

RETRAX Truck Bed Covers: RETRAX retractable truck bed cover; silver RETRAX retractable truck bed cover. Contact: Andy Nephew, marketing@rolltopcover.com, 701/746-5596. Website: www.rolltopcover.com.

Retro USA: Retro-styled chrome bumpers, trim and moldings for the ’05–’09 Mustang, ’08–’10 Challenger and ’10 Camaro. CHROME-TECH products feature chrome film laminated to TPO plastic. Other products include paintable retro-styled moldings using TPO plastics and graphics. Contact: Gary Green, garygreen@frontiernet.net, 612/202-8422. Website: www.retrousa.net.

Rhino Linings Corporation: Sprayed-on truck bedliner. Contact: Jenny Clifford jclifford@rhinolinings.com, 858/410-6020. Website: www.rhinolinings.com.

Rhino-Rack USA: Aerodynamic and heavy-duty aluminum roof racks for cars, trucks, SUVs and truck toppers. Also offering a full line of accessories, including contractor accessories, bike carriers, ski/snowboard carriers, canoe/kayak carriers, luggage baskets, alloy trays and awnings. Contact: Josh Lubitz, jlubitz@rhinorack.com, 720/320-8706. Website: www.rhinorack.com.

Rocky Ridge Products: Stainless steel roof rack systems for Jeep Wranglers, JKs and TJs. Contact: David Barnard, dbarnard@rockyridgeproducts.com, 440/241-3638. Website: www.RockyRidgeProducts.com.

Scrublade LLC: Heavy-duty windshield wiper with "scrubber" technology for on- and off-road use. Contact: Bill Westbrook, Billy@scrublade.com. Websiite: www.scrublade.com.

Smartwax: SMARTONE product for all featured vehicles. Contact: Jeff Maldonado, 800/295-8070. Website: www.smartwax.com.

SilverHorse Racing: Tru-Billet interior and exterior products for '94–'11 Ford Mustangs as well as patented Honeycomb trunk panel, grille inserts and flush-mount louvers for the '05–'11 Mustang. Contact: Marcello Canitano, info@silverhorseracing.com. Website: www.SilverHorseRacing.com.

Steele Rubber Products: Rubber parts and weatherstripping for American-made cars, trucks and street rods, primarily GM-based vehicles. Please provide information on vehicle at www.steelerubber.com/showcar. Contact: Eric Saltrick, esaltrick@steelerubber.com. Website: www.steelerubber.com.

TFP Inc.: New 3rd generation fender trim molding with a design that incorporates a “flat lip” design on the top edge that creates a thicker piece of fender trim molding which used to be factory on older luxury vehicles (Cadillac, Chrysler, etc.). Available in brushed satin finish or polished mirror finish in stainless steel. Brushed accents also available in stainless steel for all door handle covers of all popular trucks and SUVs. Contact: tfpusa@aol.com.

T-Rex Grilles: Traditional billet grilles, mesh grilles, luxury grilles, and X-Treme studded mesh grilles for cars, trucks, SUV and exotics. Grille series include billet grilles, Upper Class Series mesh grilles, Sport Series mesh grilles, HEX Series grilles and Dresden Auto luxury grilles. We also manufacture and design various styles of direct fit and universal side vents, hood vents and trim accessories. Contact: Victor Casillas, victor@trexbillet.com. Website: www.trexbillet.com.

TruXedo: Soft roll-up tonneau covers for any make or model of truck. Contact: Rachel Fernandez, rachelf@truxedo.com, 877/878-9336, ext. 287. Website: www.truxedo.com.

UnderCover Truck Bed Covers: UnderCover SE smooth, ready-to-paint tonneau covers. Contact: Jason Hutchens (jhutchens@undercoverinfo.com) or Sally Goldberg (sally@undercoverinfo.com). Website: www.UnderCoverInfo.com.

Westin Automotive Products: Rear step bumpers, front-end products, step-up products, off-road products and body trim products. Contact: Gaby Cortes, gcortes@westinautomotive.com, 626/960-6762, ext. 451. Website: www.westinautomotive.com.

Interior Products/Accessories

Bedslide: Bedslide cargo management system offers easy access to the load in your truck, van or SUV. Contact David McInturf for a qualification sheet and to discuss your plans. Contact: David McInturf, 888/807-0099 (toll free), 541/842-2771 (direct). Website: www.bedslide.com.

California Pony Cars: Premium-quality products for '64–'73 classic Mustangs and '05–'11 Mustangs. Contact: Jamiel George, Jamiel@calponycars.com, 909/923-2357. Website: www.calponycars.com.

Hella Inc.: Interior lighting (LED, halogen, step lamps, any type of interior lighting). Contact: Scott Kornhaus, 770/631-7557, 770/631-7574 (fax). Website: www.myhellalights.com.

MAXTRAX: Designer and manufacturer of an Australia-made, aggressive off-road recovery device. Developed to take the place of heavy, cumbersome vehicle-extraction equipment and weighing less than 4kg, MAXTRAX is easy to carry, maneuver and simple to use. Seeking build-ups in the off-road section of SEMA Show. Contact: Benjamin Meddows, benthepi@gmail.com, 443/955-1279. Website: www.maxtrax.com.au.

Moroso Performance Products and Competition Engineering: Moroso and its chassis company, Competition Engineering, has more than 3,500 products, including: oil pans, dry sump pumps/tanks, aluminum coolant/supercharger tanks, ignition wires, distributors, valve covers, tanks, accumulators, traction devices, shocks, roll bars, back half kits, tools and more. Contact: Thor Schroeder, thors@moroso.com, website: www.moroso.com, www.competitionengineering.com.

NRG Innovations: The Gen 3—the newest edition to the quick-release family—making it even easier on the driver to be able to take off the steering wheel. Available colors: red, blue, green, gold, orange, gun metal, black and bronze. Website: www.getnrg.com.

ORACLE Lighting Technologies: SMD line of ORACLE Halo kits. New product line for ’10 Camaro platform includes SMD Halo Rings, SMD Sidemarkers, high-powered reverse lights and interior accent lighting. Contact: justin@oraclelights.com. Website: www.AACstyle.com.

Pecca Leather: Offering customized leather seat covers for domestic and import cars and trucks. Contact: Jeff Cater, jeff@pecca.us, 562/623-0781. Website: www.peccaleather.com.

RealWheels Corp.: Billet, stainless steel and black trim accessories for the 2010+ Chevy Camaro. Products include grille kits, billet pedals, shift knobs, fuel doors and additional race-inspired accessories. Smart Car accessories (interior and exterior). A complete line of stainless steel accessories, including bumper bars, grille kits, roll-bars and more. Billet, stainless steel and black trim accessories for the 2007+ Jeep Wrangler JK. Aggressive brushguard designs, light-grilles and taillight guards. Interior replacement pedals, shift knobs and air vents. Contact: Jhan R. Dolphin, jdolphin@realwheels.com, 800/982-1180. Website: www.realwheels.com.

Shining Monkey Corp.: Car care products, wax, tire shine, detailer. Contact: Robert Dipede, 818/441-8550, 866/353-2500 (fax). Website: www.shiningmonkey.com.

SilverHorse Racing: Tru-Billet interior and exterior products for '94–'11 Ford Mustangs, as well as patented Honeycomb trunk panel, grille inserts and flush-mount louvers for the '05–'11 Mustang. Contact: Marcello Canitano, info@silverhorseracing.com. Website: www.SilverHorseRacing.com.

Speed Dawg: Shift knobs. Contact: Chris Figdore, 717/741-2665. Website: www.speeddawg.com.

US Speedo Exotic Gauges: OEM-quality gauge restyling products. Variety of restyling options that include stainless steel kits and Daytona edition to limited-edition packages, such as the Aqua Mariner edition and Presidential edition. US Speedo Exotic Gauges are available for most popular cars, trucks and SUVs. Contact Nick McLanahan nickm@motorcityproducts.com, 810/244-0909. Website: www.usspeedo.com.

Powersports Products

Dynojet Research: Powersports performance products for fuel-injected vehicles. Dynojet’s Power Commander fuel-injection modification module is available in hundreds of motorcycle, ATV and UTV applications. Popular accessories include the Quick Shifter, AutoTune and LCD. Contact: Dusty Schaller, dusty@dynojet.com, 800/992-4993. Website: www.powercommander.com.

MARSHALL MOTOART: 5.5 cage kit for Polaris Rangers and additional accessories. Lift kits, suspension, light bars to transform the stock UTV into the ultimate UTV. Contact Jake, jakemarshallmotoart@gmail.com, 801/791-4616. Website: www.marshallmotoart.com.

Suspension/Brakes

AIR-ZENITH: 200PSI air compressors for air suspension and off-road use. 200PSI working pressure, 100% duty cycle, 3.8CFM air flow, sealed for moisture and dust resistant. Must provide complete proposal for consideration. Contact: sponsor@air-zenith.com. Website: www.air-zenith.com.

BDS Suspension: Complete suspension systems—from leveling kits to 8-inch lifts—available for most all U.S. manufactured vehicles. Contact: Mike Maloney, mmaloney@bds-suspension.com. Website: www.bds-suspension.com.

BMF Wheels: Features leveling kits for the new body style Toyota Tundra, Jeep JK, ’07-up 1500 GM Pickups, ’05-up Ford F-250 and F-350, ’04-up Ford F-150 and ’94-’09 Dodge 2500 and 3500 pickups. Kits accommodate a larger tire and wheel package installation and are engineered and manufactured in the USA. Contact: Ryan Husted, ryan@bmfwheels.com, 888/313-2580. Website: www.BMFwheels.com.

Daystar Products International: Truck, Jeep and SUV suspension leveling kits, lift kits, Scorpion shock absorbers, body lifts, Jeep interior dash panels, winch accessories, motor and transmission mounts, bump stops, and suspension bushings. Contact: Trent McGee, 623/215-0459. Website: www.daystarweb.com.

Eibach Springs Inc.: High-performance sport springs, sway bars, motorsport springs and hub-centric wheel spacers for late-model car, truck and SUV applications. Contact: Ryan Hoegner, rhoegner@eibach.com, 951/256-8300. Website: www.eibach.com.

Energy Suspension: Polyurethane suspension and drivetrain components. Contact: Mike Papazian, mpapazian@energysuspension.com. Website: www.energysuspension.com.

Firestone Industrial Products: R4Tech is a hybrid air-over-leaf suspension system that provides the ride quality of a full-air suspension and offers easier loading and trailer attachment and improved ride comfort. Contact: Casey Milano, casey@mcculloughpr.com, 330/244-9980. Website: www.ride-rite.com.

Hellwig Products Co. Inc.: High-performance sway bars for street performance cars, musclecars, trucks, Jeep TJ and JK and custom applications. Materials include DOM tubular, solid bar and alloy heat-treated solid sway bars for most applications. Air suspension and helper spring kits for load-control applications. Contact Nancy Souza, nsouza@hellwigproducts.com, Melanie White, mwhite@hellwigproducts.com or David Wheeler dwheeler@hellwigproducts.com. Website: www.hellwigproducts.com.

MGP Caliper Covers: Disc brake caliper covers officially licensed by Ford and GM. Custom engraving and paint available. Applications available for domestic and import vehicles. Contact: Ben Wong, ben.wong@calipercovers.com, 619/754-4099. Website: www.calipercovers.com.

Moroso Performance Products and Competition Engineering: Moroso and its chassis company, Competition Engineering, has more than 3,500 products, including: oil pans, dry sump pumps/tanks, aluminum coolant/supercharger tanks, ignition wires, distributors, valve covers, tanks, accumulators, traction devices, shocks, roll bars, back half kits, tools and more. Contact: Thor Schroeder, thors@moroso.com, website: www.moroso.com, www.competitionengineering.com.

Performance Friction Brakes: High-performance brake kits for all vehicle types, from high-performance armored SUVs to the fastest race cars. Brake pads, discs, and zero-drag calipers. Calipers are available in custom colors. Contact: Nina Burgoon, nburgoon@performancefriction.com. Website: www.performancefriction.com.

Rancho Suspension: Entire line of performance suspension and off-road accessories, including award-winning suspension systems, shock absorbers, tuning systems, wireless controllers and a brand-new line of off-road protection gear. Available for 4WD and 2WD trucks, SUVs, and Jeep applications. Contact: Christine Bowser, chrissy@pinnmedia.com, 330/688-3515.

Road Magnet Springs: Precision suspension springs. Custom springs. Precision coil springs for many applications. Wire sizes from .008 inch to .750 inch. Contact: Mark Habicht, mark@roadmagnet.com. Website: www.roadmagnet.com.

Superlift Suspension Systems: Lift and leveling kits for trucks, Jeeps and SUVs. Please allow for a four- to six-week delivery time when requesting products for newly introduced vehicles. Contact: Joey Arbogast, jarbogast@superlift.com, 318/397-3024. Website: www.superlift.com.

VIAIR Corporation: High-performance 12- and 24-volt air compressors for air suspension and off-road use. Custom dual performance compressor packages for air suspension and onboard air systems based on tire size available for vehicles intended for strictly off-road use. Must provide complete proposal for consideration. Contact: Lance Martz, lancem@viaircorp.com. Website: www.viaircorp.com.

Wheels & Tires

BMF Wheels: Offers wheels for SEMA project vehicles. BMF Wheels are performance-driven line for the off-road and lifted-truck enthusiast. All BMF Wheels are manufactured using a proprietary, patent-pending, multi-axis CNC machining process. BMF Wheels are a fusion of forged wheel styling with cast wheel technology. Contact: Blake Ramthun, blake@bmfwheels.com, 888/313-2580. Website: www.BMFwheels.com.

Konig Wheels: Wheels. Contact: Scott Weiss, sweiss@konigwheels.com, 516/822-5700, ext. 205. Website: www.konigwheels.com.

PDK Wheels: Custom wheels from Greed Wheels, Von Max Luxury Alloys and Mamba Offroad Alloys ranging in sizes from 15 to 26 inches. Contact: Amber Kliest, amber@pdkwheels.com. Websites: www.greedwheels.com, www.mambawheels.com, www.vonmaxwheels.com.

Showwheelsusa: Manufacturer of classic muscle car wheels—a five-spoke design engineered and designed to properly fit classic musclecars and hot rods. Correct back spaces and current technology have allowed the company to produce a quality, yet affordably priced wheel. Available in gray and polished, 17-18-20 inches in diameter and from 7 to 10 inches in width. Contact: Lee Westrope, sales@showwheelsusa.com, 714/408-8577. Website: www.Showwheelsusa.com.

Vossen Wheels: High-end one-piece wheels with sizes ranging from 19-inch to 22-inch and widths up to 12.5 inches. Contact: Jav, jav@vossenwheels.com, 305/463-7778.

Other Products, Accessories & Services

MARSHALL MOTOART: One Cool Stool and the One Cool Caster. Perfect shop stool and the only shop stool you will ever need to buy, the One Cool Stool, Heirloom Stool. Replace your casters with the One Cool Caster or replace your casters on any item you have. Patent-pending design. Contact: Jake, jakemarshallmotoart@gmail.com, 801/791-4616. Website: www.onecoolstool.com, www.marshallmotoart.com.

SEMA Show exhibitors: Generate more buzz for your company and its products at the 2010 SEMA Show by offering products to builders through the SEMA Products for Project-Vehicle Builders list. NOTE: The list is reserved for exhibitors of the 2010 SEMA Show.

From now until just days before the 2010 Show, the latest additions to this list are made available through SEMA eNews. Hundreds of builders access the list looking for the pieces to complete their builds. Product-placement opportunities such as this are so beneficial that many exhibitors offer products for free or at a greatly reduced rate.

To place your product on the list, send your company name, a brief product description, contact information and a website where the products can be viewed to eNews@sema.org and put “Product List” in the e-mail subject line.

Remember, builders will contact you directly, so make sure your contact information is accurate. New submissions will be included each week when available.

Here are the most recent additions to the list:

Engine/Underhood Components

D.C. Power Engineering: Charging systems for hot rods, passenger cars, performance and racing, trucks and SUVs. From stock replacement upgrades to most efficient high-output alternators on the planet, D.C. Power finally has the charging system solution you're looking for. Contact: Dave Baird, Robbie Henstrom, Kyle Cannon, 951/509-5617. E-mail: sales@dcpowerinc.com. Website: www.dcpowerinc.com.

Exterior Products/Accessories

AMP Research: PowerStep electric-powered running boards, BedStep bumper steps and Bed X-Tender truck-bed extenders available for approved SEMA projects. Contact Mark Wronski, mark@amp-research.com, 949/221-4185. Website: www.amp-research.com.

Drake Muscle Cars: Limited supply of parts and accessories for the 2005 and up Ford Mustang and 2008 and up Dodge Challenger vehicles. Products include interior, exterior, performance parts and accessories. For catalog information, visit www.drakemusclecars.com or www.scottdrake.net to search for products. Contact: Christina Briseno, cbriseno@scottdrake.net, 800/999-0289, ext. 2103.

Drake Off Road: Limited supply of parts and accessories for the Jeep JK & TJ, Toyota FJ Cruiser and Hummer vehicles. Products include interior, exterior parts and accessories. For catalog information, visit www.drakeoffroad.com. Contact: Christina Briseno, cbriseno@scottdrake.net, 800/999-0289, ext. 2103.

Innovative Vehicle Solutions: New line of OE quality rear vision systems. Systems are available for Ford F-150, Dodge Ram and fullsize GM SUVs. Contact: The systems are not yet on the IVS website, so contact Adam Moore at amoore@ivsauto.com for more information. Website: www.ivsauto.com.

Invis-A-Rack LLC: Truck cargo/utility racks that mount with an integrated clamp system with no drilling required. Contact: Donny McCall, donny@invisarack.com, 336/372-6700. Website: www.invisarack.com.

Romik: Running boards, max bars and bull bars for all trucks (American, Asian or European). Contact: Hugo Baeza, HugoB@Romik.com, 610/395-5540. Website: www.romik.com.

Steelmate USA: Parking assist systems, more than 50 models and applications for all vehicle types. Systems are available in two-, four-, six- and eight-sensor configurations for both front and rear installations. Units start from basic audible "beep" systems and add visual and VOICE prompts. The top-of-the-line units feature video overlay on the picture from the backup camera with distance and object location shown on the screen as an overlay. Contact: John Lombard, jlombard@steelmateusa.com. Website: www.steelmateusa.com.

Vision Autodynamics Inc.: VFIBER line of are kits (ground effects/ body kits). Vast variety of exterior replacement or add-on bumpers, side skirts, rear bumpers, wings and more. Contact: Patrick@VFiber.com. Website: www.VisionAutodynamics.com.

Vortex Mud Guards: Fitments available for any pick-up, SUV, exotic sports car, luxury sedan and tuner. Contact: Derek Birk, 620/340-8505, dbirk@hopkinsmfg.com.

Powersports Products

Interparts Industries: ATV/UTV Axles – Fully assembled outboard and inboard joints installed on a 4340 chrome-moly steel axle bar. All internal precision-ground components are assemble using high-temperature, high load bearing moly grease. Contact: Rick Haffner, richardh@interparts.com, 800/222-7022, Website: www.interparts.com.

Suspension/Brake Components

Granatelli Motor Sports: Offers all suspension components for 1979–2011 Mustangs with a V6 or V8 engine. Contact: Joe Granatelli, jrgranatelli@granatellimotorsports.com, 805/486-6644. Website: www.granatellimotorsports.com.

Other Products, Accessories & Services

Sell in a Minute Corporation: Record your special vehicle build with video. Sell in a Minute Corporation's "Video Garage" can be linked to your site so that you can manage and administer your own videos. If you're building the vehicle for a client, you can send links specific to each video as the build progresses. Check out an example at www.sellinaminute.com/elcamino. Contact: Randy Wallman, rwallman@sellinaminute.com, 509/995-9711.

Here are the previous additions to the list:

Engine/Underhood Components

aFe - advanced FLOW engineering: High-performance air filters, air intake systems, exhaust systems, manifolds and intercoolers for late-model car, SUV and powersport applications. All aFe product categories are available for approved SEMA projects. Contact: Jason Bruce, jbruce@afepower.com, 951/493-7147. Website: www.afepower.com.

AIRAID Filter Company: Full line of cold air intakes, replacement filters and PowerAid throttle body spacers. Available for most trucks, SUVs and many new musclecars (Camaro, Charger, Challenger, Corvette and 2011 Mustang). Contact Brian Paravicini, brian@airaid.com, 800/498-6951, ext. 724. Website: www.airaid.com.

AEM Induction: Full line of high-performance air intake systems and air filters for sport/compacts, modern-day musclecars, trucks and SUVs. Gas and diesel applications available. Contact: Lucio Tapia luciot@aemintakes.com.
Website: www.aemintakes.com.

AMSOIL: Premium synthetic lubricants and filters for select car builders. If you have a vehicle going to SEMA for a booth display, contact us today with your specs. You may be eligible for free AMSOIL products for your booth display vehicle. Contact: Jamie, info@amsoil.com, 715/399-6557. Website: www.AMSOIL.com.

ANSA: Silverline exhaust products. Performance stainless steel exhaust systems and stacks for light-duty diesel pickups. Exhaust systems for European exotics and proto-typing for project and custom cars. Contact: Robert Diotte, bobd@ansaautomotive.com. Website: www.Ansaautomotive.com.

Ansen USA: Valve covers, air cleaners and breathers. Contact: Ariel Rider, Ariel@ansenusa.com, 310/534-1837. Website: www.AnsenUsa.com.

ATS Diesel: Performance products for diesel trucks. Contact: Matt Bozarth, matt@atsdiesel.com, 866/408-7916. Website: www.atsdiesel.com/SEMA.

Bully Dog Technologies: WatchDog and GT tuners for gas and diesel cars, trucks and SUVs. The GT adds power and economy and drive train and vehicle tuning/adjustability in one unit. The WatchDog also serves as a multi-function digital gauge, diagnostic tool and performance tester. Also offering enclosed cold air intakes for gas and diesel trucks. Contact: Mike DeFord, mike@bullydog.com, 208/226-2500. Website: www.bullydog.com.

CFMPlus LLC: Intake manifolds for Dodge 5.9L and Ford 6.0L/7.3L diesel trucks. Contact: John Moore, 760/598-2478, ext. 1. Website: www.cfmplus.com.

DeatschWerks: High-flow, high-performance, drop-in fitment fuel injectors offered in flow-matched sets. Contact: David Deatsch, 405/217-0701. Website: www.deatschwerks.com.

Dynojet Research: Automotive performance products (piggyback EMS) for select vehicles. The CMD is designed to optimize the power of your OEM forced induction vehicle while retaining the factory engine management system and allows the user to precisely alter the fuel and boost, working in parallel with OBD2. Also available, the universal Wideband 2 air/fuel ratio monitor with gauge. Check the website for available vehicle applications. Contact: Keith Lockliear, klockliear@dynojet.com, 800/992-4993. Website: www.dynojetcmd.com.

DynoMax Performance Exhaust: DynoMax Performance Exhaust dyno-proven, power-enhancing exhaust systems and components and a complete line-up of mufflers for a full range of domestic and import passenger cars, light trucks, Jeeps and SUVs. Contact: Christine Bowser, chrissy@pinnmedia.com, 330/688-3515.

Eaton: Eaton Aeroquip Performance AQP and StartLite hose, fittings and adapters for hot rods, race cars, light trucks and musclecars. Contact: Beth Mooney, bethmmooney@eaton.com, 419/891-7619. Website: www.eaton.com/aeroquipperformance.

Flowmaster Inc.: Complete exhaust systems and individual Flowmaster and Hushpower mufflers. Contact Cam Benty, cam.benty@flowmastermufflers.com, 707/694-1863.

Gibson Performance Exhaust: Performance stainless steel and aluminized exhaust and street legal headers in chrome, stainless steel and ceramic. Contact: Robert, Gibsonperformance1@gibsonperformance.com, 800/528-3044, ext.112, or visit www.gibsonexhaust.com/sponsorship for the sponsorship form. Website: www.Gibsonperformance.com.

HP Tuners: Chips and tuning. If your SEMA project needs tuning, HP Tuners wants to help you out. Contact Jay Payson, Jay@HPTuners.com. Website: www.HPTuners.com.

Injen Technology: Late-model performance products for 2011 SEMA project vehicles. Complete line of "tuned" intakes that incorporate MR Technology and Air Fusion to provide - "The World's First Tuned Air Intake System". Contact: Ed Rossi, ed@injen.com, 909/839-0706, 909/839-0427 (fax). Website: www.injen.com.

Innovate Motorsports: OT-2—a simple device that wirelessly connects your iPhone, iPod Touch or PC to your OBDII compliant vehicle. When used with the free Logworks Mobile app, the OT-2 transforms your iPhone/iPod Touch into a wireless gauge, OBDII Scan Tool, Data Logger, Dyno and performance meter and efficiency meter. Contact: Sean Crawford, scrawford@doverpmi.com, 714/372-5910, ext. 4273. Website: www.ot-2.com.

JET Performance Products: Offers performance tuning products, including performance programmers, performance modules, throttle body spacers and V-Force Plus. Contact: Dan Nicholas, dan@powerbyjet.com, 800/535-1161. Website: www.jetchip.com.

K&N Engineering Inc.: High-flow intake systems, OE replacement air filters and high-performance oil filters for most vehicles and powersports applications. Contact: Lucio Tapia, luciot@knfilters.com, 951/826-4000, ext. 4350. Website: www.knfilters.com.

Lawson Industries: Insynerator performance mufflers, MaxFlo performance mufflers, Bullit, TurboMax turbo mufflers, Lawson premium tubing, LXP Chrome, Stainless and Midnight Series exhaust tips. Contact: Frank Lamb, FrankL@LawsonIndustries.com, 800/529-7664. Website: www.LawsonIndustries.com.

Linear Logic: ScanGaugeII compact, multifunction automotive computer. It is a trip computer, digital gauges (four simultaneous) and also a scan tool for reading and clearing trouble codes. Contact Joey Snyder, joey.snyder@linear-logic.com, 888/433-5664. Website: www.scangauge.com.

Maradyne High Performance Fans: High-performance electric cooling fans with sealed motors. Molded from glass filled nylon, single- and dual-shrouded fans available. Contact: Susan Robinson, 817/428-3636, ext. 655. Website: www.maradynehp.com.

Moroso Performance Products and Competition Engineering: Moroso and its chassis company, Competition Engineering, has more than 3,500 products, including: oil pans, dry sump pumps/tanks, aluminum coolant/supercharger tanks, ignition wires, distributors, valve covers, tanks, accumulators, traction devices, shocks, roll bars, back half kits, tools and more. Contact: Thor Schroeder, thors@moroso.com, website: www.moroso.com, www.competitionengineering.com.

ODYSSEY Battery by EnerSys: Sealed, drycell batteries that provide superior cranking power, guaranteed longer service life, deep discharge recovery, vibration resistance and mounting flexibility. We complement these batteries with our line of ODYSSEY Ultimizer Chargers. Contact: April Tomalis, april.tomalis@enersys.com.

Painless Performance Products: Dual fan controllers, dual battery controller, vehicle convenience module, fuel injection harnesses, integrated fuel injection/chassis harnesses, chassis harnesses. Specific models of interest to Painless: Digital Power Manager (Dual Battery Controller, part # 40120); Painless Convenience Module (part # 63040); Perfect Flow Fuel Delivery System (part # 65100); F5 Dual Fan Controller (part # 30140); F5 Single Fan Controller (part # 30141); Integrated LS1-4L60E EFI and 26 Circuit Chassis Harness (part # 60608); Integrated GM Gen III 4.8, 5.3, 6.0L – 4L60E EFI and 26-Circuit Chassis Harness (part # 60617); 2003-06 GM Gen III 4.8, 5.3, 6.0L Electronic Throttle– 4L60E Fuel Injection Harness (part # 60221); 1997-04 GM LS1 Electronic Throttle – 4L60E Fuel Injection Harness (part # 60522); 2006-08 GM LS2, LS3, LS7 Electronic Throttle– 4L60#, 4L65E, Manual Transmission Fuel Injection Harness (part # 60524). Contact: Gary W. Wright, 817/244-6212, ext. 1026. Website: www.painlessperformance.com.

PerTronix Inc.: Performance ignition products—distributors, coils, spark plug wires. Doug's Headers—Exhaust headers for musclecars, and trucks; electronic exhaust cut outs. Patriot Exhaust Products—Exhaust headers for street rods, musclecars and trucks, Smithy Mufflers, VaraFlow tunable mufflers, side pipes and exhaust products. JBA Performance Exhaust—Exhaust headers and performance exhaust systems for classic and late-model performance cars. Contact: Don Lindfors, dlindfords@pertronix.com. Websites: www.pertronix.com; www.dougsheaders.com; www.patriotexhaust.com; www.jbaexhaust.com.

ProCharger (ATI): Superchargers and complete intercooled supercharger systems. Contact Cary Pangrac, cpangrac@procharger.com. Website: www.procharger.com.

Pypes Performance Exhaust: Wide variety of stainless steel exhaust products for classic, muscle and late-model performance vehicles. Diesel exhaust and stacks also available. Contact Mike Zimmerman, mikez@pypesexhaust.com.

Pure Power! Lifetime Oil, Fuel and Transmission Filters: Cleanable billet and stainless steel lifetime filters offers green plus performance in more than 30,000 direct spin-on applications for foreign, domestic, gasoline, diesel, bio-diesel engines ranging from motorcycles to big-rigs. Drop-in cartridge and remote designs are also available. Contact: Fran Cyrus, fran@gopurepower.com, 800/750-0827. Website: www.GoPurePower.com.

Sebring Tuning Exhaust: High-polished performance T304 stainless steel universal exhaust components. Complete line of mufflers, tips, inline resonators and flex joints with two- to four-inch internals for cars, trucks, SUVS, hot rods, off-road vehicles and bolt-on fabrication. Contact Sandy Cook: jcrsandy@aol.com, 562/431-4605. Website: www.sebringtuning.com.

SLP Performance Parts Inc.: Performance and appearance products for late-model musclecars and GM Trucks and SUVs. Contact: Kevin Woodruff, kwoodruff@slpnj.com, 732/349-2109. Website: www.slponline.com; www.slponline.com/slp_sema_show.asp.

Spectre Performance: High-performance air intake systems, air filters and chrome engine detailing accessories for musclecars and modern-day musclecars, trucks and SUVs. Contact: Julie Wright, juliew@spectreperformance.com, 909/673-9800. Website: www.spectreperformance.com.

Superchips Inc.: Flashpaq performance programmer—high-performance, hand-held tuners for most Ford, GM, Dodge/Chrysler, Nissan and Jeep applications. Tuning available for high-performance, heavy load, off-road, fuel economy and diesel racing. Contact: Brian Fletcher, bfletcher@superchips.com, 407/585-7000. Website: www.superchips.com.

TechAFX: Underhood, engine dress-up products for 2010 and later V8-powered Camaros—the Hose Relo kit, EVAP Hider Hose and more—that release the true beauty of the LS V8 engine. Contact: Larry Filipczak, larry@techafx.com, 248/925-8314. Website: www.techafx.com.

Thrush Exhaust: Wide range of header-back exhaust systems for musclecars, a complete array of stainless steel mufflers and several options of its legendary red hot Glasspack mufflers. Contact: Christine Bowser, chrissy@pinnmedia.com, 330/688-3515.

Wavetrac Differentials: Wavetrac limited slip differentials. Contact: Dana Clark, semashow@wavetrac.net, 949/362-8700, ext. 25. Website: www.wavetrac.net.

XS Power: High power AGM and lithium batteries for all forms of racing and high-end mobile audio and marine installations. Sealed, non-spillable, non-corrosive, vibration-resistant design. Contact: Scottie Johnson, scottie@xspowerbatteries.com, 888-4XS-POWER, ext. 1209. Website: www.4XSPOWER.com.

Exterior Products/Accessories

Advantage Truck Accessories: Advantage tonneau covers. Contact: Jeff Fink, 574/293-0979. Website: www.AdvantageTruckAccessories.com.

Al’s Liner Do-it-Yourself Coatings: Al’s Do-it-Yourself Bed Liner is an 86% solids content urethane/acrylic blend. The simple batch system allows users to apply in any color, texture or thickness and is ideal for automotive undercoating, interior sound deadening, trailer flooring and much more. Contact: Dana Mitchell, dana@alsliner.com, 800/999-6841. Website: www.alsliner.com.

Anvil Auto Inc.: 2010 Camaro side gill trim—CNC-machined, hand-polished billet aluminum bright trim that sticks to the side of 5th Gen Camaros using 3M tape; gives the new Camaro a retro look of a '69! Contact: Tyler or Manal, 888/723-8882. Website: www.anvilauto.com.

A.R.E.: Fiberglass tonneau covers and truck caps custom made to fit today’s most popular trucks. A.R.E. caps and covers are painted to match using the OEM paint code for a high-quality appearance. Contact: Casey Milano, casey@mcculloughpr.com. Website: www.4are.com.

BASF Refinish: A full range of waterborne and solvent-borne basecoat systems from Glasurit, R-M and Limco. Also a full line of custom products including Carizzma Colors, Foose Signature series, Flat Paint and Candy's. Contact: Brian Fox (Fox Marketing), brian@foxmarketing.net, 717/718-5505. Website: www.basfrefinish.com.

BedRug Inc.: Molded, closed-cell polypropylene foam bedliners. BedRug liners are durable, comfortable and versatile. Contact: Ryan Herman, rherman@bedrug.com, 734/434-3524.

Bedslide: Bedslide cargo management system offers easy access to your truck's, van's or SUV's load. Contact David McInturf for qualification sheet and to discuss your plans. Contact: David McInturf, 888/807-0099 (toll free), 541/842-2771 (direct). Website: www.bedslide.com.

BOLT Series Locks: Padlocks, receiver locks, cable locks and spare tire locks that work with the vehicle's (GM, Ford, Chrysler or Jeep) key. Contact: Erika Garcia, ggarcia@strattec.com, 414/247-3552. Website: www.BOLTlock.com.

Bridjit Curb Ramps: Designed to smooth the entry and exit from a rolled-curb driveway. Bridjit Curb Ramps are a green solution designed to help homeowners reduce the jarring and underside vehicle damage that occurs from a roll-over-curb driveway entry. Simple to install, the Bridjit Curb Ramp is made from recycled tires and is generally sold as a set of three, 4-foot modular sections. The three-piece set provides 12 feet of driveway coverage. Additional center sections can be added as needed to accommodate wider driveways. Contact: Leslie Allen, lallen@themarxgrp.com, 615/378-1198. Website: www.bridjit.com.

Brute Industries: Race Ramps are lightweight ramps and stands used to raise vehicles. They specialize in accommodating low-ground-clearance vehicles. Stylish appearance makes for dramatic display of show vehicles. Strong, lightweight and realistic appearing rocks for power sports and 4x4 displays are also available. Contact: Jonathan Light, jon@infocuspowersportsmarketing.com, 765/838-3406. Website: www.raceramps.com.

California Pony Cars: Premium-quality products for '64–'73 classic Mustangs and 2005–2011 Mustangs. Contact: Jamiel George, Jamiel@calponycars.com, 909/923-2357. Website: www.calponycars.com.

Cequent Performance Products: Towing and trailer accessories. Contact: Carol Doney, cdoney@cequentgroup.com.
Website: www.cequentgroup.com.

Correct Performance Accessories: CPX Foilers are auto-body accessories that enhance the look of any vehicle while improving aerodynamics with a low-drag coefficient and are currently available for popular retro-look performance vehicles such as the new Chevrolet Camaro, Ford Mustang and Dodge Challenger. CPX Foilers are made of high-quality impact-resistant polyurethane materials. Contact: Mike Clinger, mike@cpxusa.com, 714/538-8099. Website: www.cpxusa.com.

DiamondBack Truck Covers: Manufacturers of heavy-duty, three-panel, diamond-plate truck bed covers for the work truck and light truck accessories market. Recognized for the load-bearing HD cover, DiamondBack has introduced two new covers in 2010 designed for restyling and improved utility—The DiamondBack 180 and the DiamondBack 270. Contact: Brandon Moist, brandon@diamondbackcovers.com, 800/935-4002 ext. 22. Website: www.diamondbackcovers.com/linex/default.asp.

Directus Total Vehicle Technologies: Offers several OEM replacement rear-view mirror systems (TD-43 Touch, TD-43BT, TD-43R) that include systems with touchscreen GPS navigation, wireless Bluetooth functionality and backup camera capability. Contact: Derek Prentice, Derek@DirectusNav.com, 810/355-2266. Website: www.DirectusNav.com.

Eagle Enterprises Inc.: Striping and vinyl graphics. Contact: Wayne Casimir, 800/874-9564, 316/945-8500. Website: www.eagleict.com.

EGR Incorporated: Full line of exterior plastic accessories for trucks, SUVs and cars. Products include, but are not limited to, No Drill Fender Flares, No Drill Hood Protectors, Side WindowVisors and Bed Rail Caps. Contact: info@egrusa.com, 909/923-7075. Website: www.egrusa.com.

Extang: Extang tonneau covers. Contact: Renee Dettling, renee@extang.com, 734/434-3508. Website: www.extang.com.

Finishlinewest: Stonehenge Series hard parts for Jeeps—various products for the two- or four-door Jeep Wrangler JK. Contact: 760/885-6054, stonehengeseries@gmail.com. Website: www.stonehengeseries.com.

Go Industries Inc.: Big Tex and Rancher grille guards. Nerf bars, tailgates and rack systems. Contact: Scott Covelli, scott@goindustries.com, 800/527-4345. Website: www.goindustries.com.

Go Rhino! Products: Nerf bars, grille guards, steps, bed bars and hitch steps. Contact: Kathryn Gallagher, kathryn@gorhino.com, 888/427-4466. Website: www.gorhino.com.

Hella Inc.: Any type of auxiliary lamp. LED taillamps for F-150, Silverado, Tundra and RAM. Halogen auxiliary lamps and accessories. Contact: Scott Kornhaus, 770/631-7557, 770-631-7574 (fax). Website: www.myhellalights.com.

Husky Liners: Custom-molded floor and cargo liners—vehicle specific automotive carpet protection products; available for trucks, SUVs, cars and vans. Custom-molded mud guards—vehicle-specific applications for trucks and SUVs. Gear box, an interior vehicle storage system; vehicle-specific applications that fit under back seat of extended/crew cab trucks. Headlite Guard—vehicle specific applications, available for trucks, SUVs and cars. Husky Shield clear, paint protection film designed to protect your vehicle’s leading edge from road debris; vehicle specific-applications, available for trucks, SUVs and cars. Contact: Bennett Jackson, bjackson@huskyliners.com, 620/221-2268 Website: www.huskyliners.com.

Innovative Vehicle Solutions: Chevy Camaro 2010 and up, IVS Havoc full aero kit, consisting of lower front chin spoiler with brake cooling openings; side rockers featuring accent lines that tie-in with the front chin spoiler; aggressively styled rear spoiler; rear two-piece diffuser with a paintable outer section and optional carbon fiber hydrographics on the center section, designed to provide a performance look and hide the low hanging factory exhaust cans. All of the parts are hard tooled and made from urethane, not fiberglass. The kit was designed and developed for an OE fit and finish, with minimal install time. There is no drilling into metal, and most parts use the stock attachment locations. Note: The front chin spoiler only fits the SS models, all of the other components fit both the SS and six-cylinder models. IVS Havoc Wheels designed around the OE Staggered fitment (20 X 8 front, 20 X 9 rear); PVD coated (the new chrome); will not chip or peal and is fully validated for OE applications; available in black or bright finish; center cap bore dimension is the same as the OE wheels, so the end user can keep the heritage look with inserting the OE bowtie center caps. IVS Havoc stripe package, manufacturer and material is the same as the OE rally stripe package offered by GM; rear spoiler stripe extension allows the customer to continue the OE rally stripes onto the Havoc spoiler. IVS rear vision systems for Dodge full-size truck, Ford full-size trucks. Contact: Adam Moore, 248/298-3112. Website: www.ivsauto.com.

Little Boys Offroad Toys LLC: The GEARSAFE—a versatile, steel, lockable toolbox inconspicuously disguised as a spare tire carrier for Jeep, SUV or trailers with vertically mounted spare tires. No drilling and no welding required for factory JEEP JK applications. Vehicles with aftermarket swing away tire carriers and trailers can use the specially designed GEARSAFE mounting plate to bolt on The GEARSAFE with the enclosed hardware. The GEARSAFE comes in various diameters, widths and lug patterns. Contact: Matt Little, 866/604-8021. Website: www.thegearsafe.com.

Mile Marker Inc.: Self-recovery electric and hydraulic winches. Contact: Susanne Krentz, susannemk@milemarker.com, 800/426-8646.

Moroso Performance Products and Competition Engineering: Moroso and its chassis company, Competition Engineering, has more than 3,500 products, including: oil pans, dry sump pumps/tanks, aluminum coolant/supercharger tanks, ignition wires, distributors, valve covers, tanks, accumulators, traction devices, shocks, roll bars, back half kits, tools and more. Contact: Thor Schroeder, thors@moroso.com, website: www.moroso.com, www.competitionengineering.com.

ORACLE Lighting Technologies: SMD line of ORACLE Halo kits. New product line for ’10 Camaro platform includes SMD Halo Rings, SMD Sidemarkers, high-powered reverse lights and interior accent lighting. Contact: justin@oraclelights.com. Website: www.AACstyle.com.

Owens Products: Made in the U.S.A. custom running boards, tool boxes and UTV boxes. Contact: Kathy Knautz, kathy@owensproducts.com. Website: www.owens-pro.com.

Penda Corporation: Bedliners: Penda Skid Resistor, Pendaliner and Duraliner. Penda Venture tonneau cover. Penda Hide-A-Hook tie downs. Contact: Thyra Jean Ludwig, thyraludwig@penda.com, 608/742-5301, ext. 7838. Website: www.penda.com/automotive.

Poly Performance Inc.: High-end Jeep, truck and buggy accessories. Jeep JK Wrangler (2007–current) Synergy Suspension line and additional JK accessories. Contact: Dave Schlossberg, 805/783-2060, ext. 203. Website: www.polyperformance.com.

Räv Design: Custom design, digital printing and vinyl graphics for any car, truck or SUV. Contact: Nikki Hess, 714/743-3199. Website: www.ravdesign.com.

RealWheels Corp.: Billet, stainless steel and black trim accessories for the 2010+ Chevy Camaro. Products include grille kits, billet pedals, shift knobs, fuel doors and additional race-inspired accessories. Smart Car accessories (interior and exterior). A complete line of stainless steel accessories including bumper bars, grille kits, roll-bars and more. Billet, stainless steel and black trim accessories for the 2007+ Jeep Wrangler JK. Aggressive brushguard designs, light-grilles and taillight guards. Interior replacement pedals, shift knobs and air vents. Contact: Jhan R. Dolphin, jdolphin@realwheels.com, 800/982-1180. Website: www.realwheels.com.

RETRAX Truck Bed Covers: RETRAX retractable truck bed cover; silver RETRAX retractable truck bed cover. Contact: Andy Nephew, marketing@rolltopcover.com, 701/746-5596. Website: www.rolltopcover.com.

Retro USA: Retro-styled chrome bumpers, trim and moldings for the ’05–’09 Mustang, ’08–’10 Challenger and ’10 Camaro. CHROME-TECH products feature chrome film laminated to TPO plastic. Other products include paintable retro-styled moldings using TPO plastics and graphics. Contact: Gary Green, garygreen@frontiernet.net, 612/202-8422. Website: www.retrousa.net.

Rhino Linings Corporation: Sprayed-on truck bedliner. Contact: Jenny Clifford jclifford@rhinolinings.com, 858/410-6020. Website: www.rhinolinings.com.

Rhino-Rack USA: Aerodynamic and heavy-duty aluminum roof racks for cars, trucks, SUVs and truck toppers. Also offering a full line of accessories, including contractor accessories, bike carriers, ski/snowboard carriers, canoe/kayak carriers, luggage baskets, alloy trays and awnings. Contact: Josh Lubitz, jlubitz@rhinorack.com, 720/320-8706. Website: www.rhinorack.com.

Rocky Ridge Products: Stainless steel roof rack systems for Jeep Wranglers, JKs and TJs. Contact: David Barnard, dbarnard@rockyridgeproducts.com, 440/241-3638. Website: www.RockyRidgeProducts.com.

Scrublade LLC: Heavy-duty windshield wiper with "scrubber" technology for on- and off-road use. Contact: Bill Westbrook, Billy@scrublade.com. Websiite: www.scrublade.com.

Smartwax: SMARTONE product for all featured vehicles. Contact: Jeff Maldonado, 800/295-8070. Website: www.smartwax.com.

SilverHorse Racing: Tru-Billet interior and exterior products for '94–'11 Ford Mustangs as well as patented Honeycomb trunk panel, grille inserts and flush-mount louvers for the '05–'11 Mustang. Contact: Marcello Canitano, info@silverhorseracing.com. Website: www.SilverHorseRacing.com.

Steele Rubber Products: Rubber parts and weatherstripping for American-made cars, trucks and street rods, primarily GM-based vehicles. Please provide information on vehicle at www.steelerubber.com/showcar. Contact: Eric Saltrick, esaltrick@steelerubber.com. Website: www.steelerubber.com.

TFP Inc.: New 3rd generation fender trim molding with a design that incorporates a “flat lip” design on the top edge that creates a thicker piece of fender trim molding which used to be factory on older luxury vehicles (Cadillac, Chrysler, etc.). Available in brushed satin finish or polished mirror finish in stainless steel. Brushed accents also available in stainless steel for all door handle covers of all popular trucks and SUVs. Contact: tfpusa@aol.com.

T-Rex Grilles: Traditional billet grilles, mesh grilles, luxury grilles, and X-Treme studded mesh grilles for cars, trucks, SUV and exotics. Grille series include billet grilles, Upper Class Series mesh grilles, Sport Series mesh grilles, HEX Series grilles and Dresden Auto luxury grilles. We also manufacture and design various styles of direct fit and universal side vents, hood vents and trim accessories. Contact: Victor Casillas, victor@trexbillet.com. Website: www.trexbillet.com.

TruXedo: Soft roll-up tonneau covers for any make or model of truck. Contact: Rachel Fernandez, rachelf@truxedo.com, 877/878-9336, ext. 287. Website: www.truxedo.com.

UnderCover Truck Bed Covers: UnderCover SE smooth, ready-to-paint tonneau covers. Contact: Jason Hutchens (jhutchens@undercoverinfo.com) or Sally Goldberg (sally@undercoverinfo.com). Website: www.UnderCoverInfo.com.

Westin Automotive Products: Rear step bumpers, front-end products, step-up products, off-road products and body trim products. Contact: Gaby Cortes, gcortes@westinautomotive.com, 626/960-6762, ext. 451. Website: www.westinautomotive.com.

Interior Products/Accessories

Bedslide: Bedslide cargo management system offers easy access to the load in your truck, van or SUV. Contact David McInturf for a qualification sheet and to discuss your plans. Contact: David McInturf, 888/807-0099 (toll free), 541/842-2771 (direct). Website: www.bedslide.com.

California Pony Cars: Premium-quality products for '64–'73 classic Mustangs and '05–'11 Mustangs. Contact: Jamiel George, Jamiel@calponycars.com, 909/923-2357. Website: www.calponycars.com.

Hella Inc.: Interior lighting (LED, halogen, step lamps, any type of interior lighting). Contact: Scott Kornhaus, 770/631-7557, 770/631-7574 (fax). Website: www.myhellalights.com.

MAXTRAX: Designer and manufacturer of an Australia-made, aggressive off-road recovery device. Developed to take the place of heavy, cumbersome vehicle-extraction equipment and weighing less than 4kg, MAXTRAX is easy to carry, maneuver and simple to use. Seeking build-ups in the off-road section of SEMA Show. Contact: Benjamin Meddows, benthepi@gmail.com, 443/955-1279. Website: www.maxtrax.com.au.

Moroso Performance Products and Competition Engineering: Moroso and its chassis company, Competition Engineering, has more than 3,500 products, including: oil pans, dry sump pumps/tanks, aluminum coolant/supercharger tanks, ignition wires, distributors, valve covers, tanks, accumulators, traction devices, shocks, roll bars, back half kits, tools and more. Contact: Thor Schroeder, thors@moroso.com, website: www.moroso.com, www.competitionengineering.com.

NRG Innovations: The Gen 3—the newest edition to the quick-release family—making it even easier on the driver to be able to take off the steering wheel. Available colors: red, blue, green, gold, orange, gun metal, black and bronze. Website: www.getnrg.com.

ORACLE Lighting Technologies: SMD line of ORACLE Halo kits. New product line for ’10 Camaro platform includes SMD Halo Rings, SMD Sidemarkers, high-powered reverse lights and interior accent lighting. Contact: justin@oraclelights.com. Website: www.AACstyle.com.

Pecca Leather: Offering customized leather seat covers for domestic and import cars and trucks. Contact: Jeff Cater, jeff@pecca.us, 562/623-0781. Website: www.peccaleather.com.

RealWheels Corp.: Billet, stainless steel and black trim accessories for the 2010+ Chevy Camaro. Products include grille kits, billet pedals, shift knobs, fuel doors and additional race-inspired accessories. Smart Car accessories (interior and exterior). A complete line of stainless steel accessories, including bumper bars, grille kits, roll-bars and more. Billet, stainless steel and black trim accessories for the 2007+ Jeep Wrangler JK. Aggressive brushguard designs, light-grilles and taillight guards. Interior replacement pedals, shift knobs and air vents. Contact: Jhan R. Dolphin, jdolphin@realwheels.com, 800/982-1180. Website: www.realwheels.com.

Shining Monkey Corp.: Car care products, wax, tire shine, detailer. Contact: Robert Dipede, 818/441-8550, 866/353-2500 (fax). Website: www.shiningmonkey.com.

SilverHorse Racing: Tru-Billet interior and exterior products for '94–'11 Ford Mustangs, as well as patented Honeycomb trunk panel, grille inserts and flush-mount louvers for the '05–'11 Mustang. Contact: Marcello Canitano, info@silverhorseracing.com. Website: www.SilverHorseRacing.com.

Speed Dawg: Shift knobs. Contact: Chris Figdore, 717/741-2665. Website: www.speeddawg.com.

US Speedo Exotic Gauges: OEM-quality gauge restyling products. Variety of restyling options that include stainless steel kits and Daytona edition to limited-edition packages, such as the Aqua Mariner edition and Presidential edition. US Speedo Exotic Gauges are available for most popular cars, trucks and SUVs. Contact Nick McLanahan nickm@motorcityproducts.com, 810/244-0909. Website: www.usspeedo.com.

Powersports Products

Dynojet Research: Powersports performance products for fuel-injected vehicles. Dynojet’s Power Commander fuel-injection modification module is available in hundreds of motorcycle, ATV and UTV applications. Popular accessories include the Quick Shifter, AutoTune and LCD. Contact: Dusty Schaller, dusty@dynojet.com, 800/992-4993. Website: www.powercommander.com.

MARSHALL MOTOART: 5.5 cage kit for Polaris Rangers and additional accessories. Lift kits, suspension, light bars to transform the stock UTV into the ultimate UTV. Contact Jake, jakemarshallmotoart@gmail.com, 801/791-4616. Website: www.marshallmotoart.com.

Suspension/Brakes

AIR-ZENITH: 200PSI air compressors for air suspension and off-road use. 200PSI working pressure, 100% duty cycle, 3.8CFM air flow, sealed for moisture and dust resistant. Must provide complete proposal for consideration. Contact: sponsor@air-zenith.com. Website: www.air-zenith.com.

BDS Suspension: Complete suspension systems—from leveling kits to 8-inch lifts—available for most all U.S. manufactured vehicles. Contact: Mike Maloney, mmaloney@bds-suspension.com. Website: www.bds-suspension.com.

BMF Wheels: Features leveling kits for the new body style Toyota Tundra, Jeep JK, ’07-up 1500 GM Pickups, ’05-up Ford F-250 and F-350, ’04-up Ford F-150 and ’94-’09 Dodge 2500 and 3500 pickups. Kits accommodate a larger tire and wheel package installation and are engineered and manufactured in the USA. Contact: Ryan Husted, ryan@bmfwheels.com, 888/313-2580. Website: www.BMFwheels.com.

Daystar Products International: Truck, Jeep and SUV suspension leveling kits, lift kits, Scorpion shock absorbers, body lifts, Jeep interior dash panels, winch accessories, motor and transmission mounts, bump stops, and suspension bushings. Contact: Trent McGee, 623/215-0459. Website: www.daystarweb.com.

Eibach Springs Inc.: High-performance sport springs, sway bars, motorsport springs and hub-centric wheel spacers for late-model car, truck and SUV applications. Contact: Ryan Hoegner, rhoegner@eibach.com, 951/256-8300. Website: www.eibach.com.

Energy Suspension: Polyurethane suspension and drivetrain components. Contact: Mike Papazian, mpapazian@energysuspension.com. Website: www.energysuspension.com.

Firestone Industrial Products: R4Tech is a hybrid air-over-leaf suspension system that provides the ride quality of a full-air suspension and offers easier loading and trailer attachment and improved ride comfort. Contact: Casey Milano, casey@mcculloughpr.com, 330/244-9980. Website: www.ride-rite.com.

Hellwig Products Co. Inc.: High-performance sway bars for street performance cars, musclecars, trucks, Jeep TJ and JK and custom applications. Materials include DOM tubular, solid bar and alloy heat-treated solid sway bars for most applications. Air suspension and helper spring kits for load-control applications. Contact Nancy Souza, nsouza@hellwigproducts.com, Melanie White, mwhite@hellwigproducts.com or David Wheeler dwheeler@hellwigproducts.com. Website: www.hellwigproducts.com.

MGP Caliper Covers: Disc brake caliper covers officially licensed by Ford and GM. Custom engraving and paint available. Applications available for domestic and import vehicles. Contact: Ben Wong, ben.wong@calipercovers.com, 619/754-4099. Website: www.calipercovers.com.

Moroso Performance Products and Competition Engineering: Moroso and its chassis company, Competition Engineering, has more than 3,500 products, including: oil pans, dry sump pumps/tanks, aluminum coolant/supercharger tanks, ignition wires, distributors, valve covers, tanks, accumulators, traction devices, shocks, roll bars, back half kits, tools and more. Contact: Thor Schroeder, thors@moroso.com, website: www.moroso.com, www.competitionengineering.com.

Performance Friction Brakes: High-performance brake kits for all vehicle types, from high-performance armored SUVs to the fastest race cars. Brake pads, discs, and zero-drag calipers. Calipers are available in custom colors. Contact: Nina Burgoon, nburgoon@performancefriction.com. Website: www.performancefriction.com.

Rancho Suspension: Entire line of performance suspension and off-road accessories, including award-winning suspension systems, shock absorbers, tuning systems, wireless controllers and a brand-new line of off-road protection gear. Available for 4WD and 2WD trucks, SUVs, and Jeep applications. Contact: Christine Bowser, chrissy@pinnmedia.com, 330/688-3515.

Road Magnet Springs: Precision suspension springs. Custom springs. Precision coil springs for many applications. Wire sizes from .008 inch to .750 inch. Contact: Mark Habicht, mark@roadmagnet.com. Website: www.roadmagnet.com.

Superlift Suspension Systems: Lift and leveling kits for trucks, Jeeps and SUVs. Please allow for a four- to six-week delivery time when requesting products for newly introduced vehicles. Contact: Joey Arbogast, jarbogast@superlift.com, 318/397-3024. Website: www.superlift.com.

VIAIR Corporation: High-performance 12- and 24-volt air compressors for air suspension and off-road use. Custom dual performance compressor packages for air suspension and onboard air systems based on tire size available for vehicles intended for strictly off-road use. Must provide complete proposal for consideration. Contact: Lance Martz, lancem@viaircorp.com. Website: www.viaircorp.com.

Wheels & Tires

BMF Wheels: Offers wheels for SEMA project vehicles. BMF Wheels are performance-driven line for the off-road and lifted-truck enthusiast. All BMF Wheels are manufactured using a proprietary, patent-pending, multi-axis CNC machining process. BMF Wheels are a fusion of forged wheel styling with cast wheel technology. Contact: Blake Ramthun, blake@bmfwheels.com, 888/313-2580. Website: www.BMFwheels.com.

Konig Wheels: Wheels. Contact: Scott Weiss, sweiss@konigwheels.com, 516/822-5700, ext. 205. Website: www.konigwheels.com.

PDK Wheels: Custom wheels from Greed Wheels, Von Max Luxury Alloys and Mamba Offroad Alloys ranging in sizes from 15 to 26 inches. Contact: Amber Kliest, amber@pdkwheels.com. Websites: www.greedwheels.com, www.mambawheels.com, www.vonmaxwheels.com.

Showwheelsusa: Manufacturer of classic muscle car wheels—a five-spoke design engineered and designed to properly fit classic musclecars and hot rods. Correct back spaces and current technology have allowed the company to produce a quality, yet affordably priced wheel. Available in gray and polished, 17-18-20 inches in diameter and from 7 to 10 inches in width. Contact: Lee Westrope, sales@showwheelsusa.com, 714/408-8577. Website: www.Showwheelsusa.com.

Vossen Wheels: High-end one-piece wheels with sizes ranging from 19-inch to 22-inch and widths up to 12.5 inches. Contact: Jav, jav@vossenwheels.com, 305/463-7778.

Other Products, Accessories & Services

MARSHALL MOTOART: One Cool Stool and the One Cool Caster. Perfect shop stool and the only shop stool you will ever need to buy, the One Cool Stool, Heirloom Stool. Replace your casters with the One Cool Caster or replace your casters on any item you have. Patent-pending design. Contact: Jake, jakemarshallmotoart@gmail.com, 801/791-4616. Website: www.onecoolstool.com, www.marshallmotoart.com.