Tue, 05/01/2012 - 08:31

SEMA News—May 2012

CHRIS KERSTING

SEMA and PRI

Chris Kersting-SEMA President and CEO, Automotive Aftermarket Research, Automotive Accessories Research, Rapid Prototype
Since its beginning 24 years ago, the PRI Trade Show has become a key asset to race teams, engine builders, track owners, fabricators and retailers in every form of motorsports. Last year, more than 1,100 companies came to the PRI Trade Show to exhibit, and nearly 40,000 motorsports professionals attended. PRI has its own unique constituency and culture, and it has a history of helping build businesses through face-to-face meetings between exhibitors and attendees.

Likewise, the Performance Racing Industry publication has enjoyed a circulation of 25,500 and is viewed as providing the hard-core racing segment with outstanding editorial content. In terms of providing great value to PRI’s customers, there really hasn’t been much missing!

That’s why SEMA was eager to take the hand-off from Steve Lewis as he prepared the transition of these two great industry institutions. Now that the acquisition has been formalized, we can say that we are very pleased to carry forward the spirit and culture of PRI so that it can continue to flourish. Our goals in this acquisition are simple:

  1. Provide PRI with resources and support so that the show and magazine can continue to be leaders in returning great value to the hard- core racing segment.
  2. Build the association’s relationship with the businesses in the PRI segment so that more companies will tap into the great services and benefits SEMA provides.
  3. Establish a collaborative relationship between the talented folks in SEMA and PRI to innovate and improve the key offerings of each.

The current team at PRI will continue to serve its customers and produce the PRI Trade Show—only now with the resources of SEMA to boost its capabilities. John Kilroy, a 20-year veteran of Laguna Coast Publishing, has been promoted to the role of Vice President/General Manager and will oversee day-to-day operations.

Likewise, the SEMA Show will continue in its quest to return value through its unique gathering of all aspects of the automotive specialty-equipment market. The SEMA Show will be the SEMA Show, and the PRI Show will be the PRI Show—with the unique and distinct nature of each event. Of course, we wouldn’t have pursued the acquisition unless we believed that this would also create an opportunity to better serve the businesses that make up the industry. SEMA has always had strong support from the performance racing market, and this gives us a chance to deepen and improve our relationships.

Many previous and current SEMA board members have been instrumental in helping to build PRI. They appreciate the legacy of the brand, so we can expect to receive good guidance as we move forward, with every opportunity to make both shows and publications the best they can be long into the future.

Earlier this month, it was announced that SEMA has acquired the highly successful PRI Trade Show and Performance Racing Industry magazine. I’d like to share with SEMA News readers some of the thinking behind this move and highlight the benefits and value it will provide for the industry.

Tue, 05/01/2012 - 08:08

SEMA News—May 2012

Legislative & Technical Affairs
By Steve McDonald

Washington Enacts Law to Exempt Restoration and Custom Shops From Written Estimate Requirement

SEMA Member Takes Active Role in Legislative Process

  State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right).
Kevin Jack (center) of SEMA member Thunder Road Street Rods & Customs celebrates the bill signing with Washington State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right). 
   
A SEMA-supported bill to exempt restoration and custom shops from the requirement that they provide written estimates for the repair of any vehicle that qualifies for a “horseless carriage” or “collector vehicle” license plate or is a “parts car,” “street rod” or “custom vehicle” was signed into law by Governor Chris Gregoire. Effective January 1, 2013, the new law will allow restoration and custom shops to bill at least every two weeks on a time-and-materials basis.

Under Washington law, a “horseless carriage” is a vehicle that is more than 40 years old and is owned and operated as a collector vehicle; a “collector vehicle” is any motor vehicle that is more than 30 years old; a “custom vehicle” is any motor vehicle that is at least 30 years old and of a model year after 1948 or was manufactured to resemble a vehicle at least 30 years old and of a model year after 1948 and has alterations to one or more of the major component parts; a “parts car” is a motor vehicle that is owned by a collector to furnish parts for restoration or maintenance; and a “street rod” is a motor vehicle that is a 1948 or older vehicle or a vehicle manufactured after 1948 to resemble a vehicle manufactured before 1949 and has alterations to one or more of the major component parts.

“Customers of restoration and customization shops have the right to be notified of costs in a timely fashion,” said SEMA Vice President for Government Affairs Steve McDonald.

“Under a SEMA-drafted provision to the new law, restoration and custom shops will be allowed to bill at least every two weeks on a time-and-materials basis. Shops would be able to accurately inform customers of actual costs and materials, removing the vagueness associated with shops attempting to guess probable time for unique tasks and probable costs for unique and in some cases yet-to-be-fabricated, parts.”

  Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
Surrounded by members of the Washington state custom and restoration business community, Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
   
The new law is the product of months of consultation with state legislators, regulators and the local business community and was the brainchild of Kevin Jack of SEMA member Thunder Road Street Rods & Customs in Benton City, Washington.

“It was an honor testifying in committee in favor of the bill and being involved in the political process to create positive change,” Jack said.

“This new law, as sponsored by Senators Mike Carrell and Jerome Delvin, recognizes that restoration and custom shops constitute a small portion of shops that work on vehicles and fulfill a unique niche that does not conform to that of standard repair shops. The law will allow us to bill our customers fairly and on a timely basis for the actual work done on these unique vehicles without the unreasonable expectation created by adherence to a written estimate requirement.”

Similar legislation is currently pending in New York and New Jersey and will continue to be pursued by SEMA in states that regulate restoration and custom shops under the same rules that govern straight repair businesses. 

Tue, 05/01/2012 - 08:08

SEMA News—May 2012

Legislative & Technical Affairs
By Steve McDonald

Washington Enacts Law to Exempt Restoration and Custom Shops From Written Estimate Requirement

SEMA Member Takes Active Role in Legislative Process

  State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right).
Kevin Jack (center) of SEMA member Thunder Road Street Rods & Customs celebrates the bill signing with Washington State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right). 
   
A SEMA-supported bill to exempt restoration and custom shops from the requirement that they provide written estimates for the repair of any vehicle that qualifies for a “horseless carriage” or “collector vehicle” license plate or is a “parts car,” “street rod” or “custom vehicle” was signed into law by Governor Chris Gregoire. Effective January 1, 2013, the new law will allow restoration and custom shops to bill at least every two weeks on a time-and-materials basis.

Under Washington law, a “horseless carriage” is a vehicle that is more than 40 years old and is owned and operated as a collector vehicle; a “collector vehicle” is any motor vehicle that is more than 30 years old; a “custom vehicle” is any motor vehicle that is at least 30 years old and of a model year after 1948 or was manufactured to resemble a vehicle at least 30 years old and of a model year after 1948 and has alterations to one or more of the major component parts; a “parts car” is a motor vehicle that is owned by a collector to furnish parts for restoration or maintenance; and a “street rod” is a motor vehicle that is a 1948 or older vehicle or a vehicle manufactured after 1948 to resemble a vehicle manufactured before 1949 and has alterations to one or more of the major component parts.

“Customers of restoration and customization shops have the right to be notified of costs in a timely fashion,” said SEMA Vice President for Government Affairs Steve McDonald.

“Under a SEMA-drafted provision to the new law, restoration and custom shops will be allowed to bill at least every two weeks on a time-and-materials basis. Shops would be able to accurately inform customers of actual costs and materials, removing the vagueness associated with shops attempting to guess probable time for unique tasks and probable costs for unique and in some cases yet-to-be-fabricated, parts.”

  Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
Surrounded by members of the Washington state custom and restoration business community, Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
   
The new law is the product of months of consultation with state legislators, regulators and the local business community and was the brainchild of Kevin Jack of SEMA member Thunder Road Street Rods & Customs in Benton City, Washington.

“It was an honor testifying in committee in favor of the bill and being involved in the political process to create positive change,” Jack said.

“This new law, as sponsored by Senators Mike Carrell and Jerome Delvin, recognizes that restoration and custom shops constitute a small portion of shops that work on vehicles and fulfill a unique niche that does not conform to that of standard repair shops. The law will allow us to bill our customers fairly and on a timely basis for the actual work done on these unique vehicles without the unreasonable expectation created by adherence to a written estimate requirement.”

Similar legislation is currently pending in New York and New Jersey and will continue to be pursued by SEMA in states that regulate restoration and custom shops under the same rules that govern straight repair businesses. 

Tue, 05/01/2012 - 08:08

SEMA News—May 2012

Legislative & Technical Affairs
By Steve McDonald

Washington Enacts Law to Exempt Restoration and Custom Shops From Written Estimate Requirement

SEMA Member Takes Active Role in Legislative Process

  State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right).
Kevin Jack (center) of SEMA member Thunder Road Street Rods & Customs celebrates the bill signing with Washington State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right). 
   
A SEMA-supported bill to exempt restoration and custom shops from the requirement that they provide written estimates for the repair of any vehicle that qualifies for a “horseless carriage” or “collector vehicle” license plate or is a “parts car,” “street rod” or “custom vehicle” was signed into law by Governor Chris Gregoire. Effective January 1, 2013, the new law will allow restoration and custom shops to bill at least every two weeks on a time-and-materials basis.

Under Washington law, a “horseless carriage” is a vehicle that is more than 40 years old and is owned and operated as a collector vehicle; a “collector vehicle” is any motor vehicle that is more than 30 years old; a “custom vehicle” is any motor vehicle that is at least 30 years old and of a model year after 1948 or was manufactured to resemble a vehicle at least 30 years old and of a model year after 1948 and has alterations to one or more of the major component parts; a “parts car” is a motor vehicle that is owned by a collector to furnish parts for restoration or maintenance; and a “street rod” is a motor vehicle that is a 1948 or older vehicle or a vehicle manufactured after 1948 to resemble a vehicle manufactured before 1949 and has alterations to one or more of the major component parts.

“Customers of restoration and customization shops have the right to be notified of costs in a timely fashion,” said SEMA Vice President for Government Affairs Steve McDonald.

“Under a SEMA-drafted provision to the new law, restoration and custom shops will be allowed to bill at least every two weeks on a time-and-materials basis. Shops would be able to accurately inform customers of actual costs and materials, removing the vagueness associated with shops attempting to guess probable time for unique tasks and probable costs for unique and in some cases yet-to-be-fabricated, parts.”

  Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
Surrounded by members of the Washington state custom and restoration business community, Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
   
The new law is the product of months of consultation with state legislators, regulators and the local business community and was the brainchild of Kevin Jack of SEMA member Thunder Road Street Rods & Customs in Benton City, Washington.

“It was an honor testifying in committee in favor of the bill and being involved in the political process to create positive change,” Jack said.

“This new law, as sponsored by Senators Mike Carrell and Jerome Delvin, recognizes that restoration and custom shops constitute a small portion of shops that work on vehicles and fulfill a unique niche that does not conform to that of standard repair shops. The law will allow us to bill our customers fairly and on a timely basis for the actual work done on these unique vehicles without the unreasonable expectation created by adherence to a written estimate requirement.”

Similar legislation is currently pending in New York and New Jersey and will continue to be pursued by SEMA in states that regulate restoration and custom shops under the same rules that govern straight repair businesses. 

Tue, 05/01/2012 - 08:08

SEMA News—May 2012

Legislative & Technical Affairs
By Steve McDonald

Washington Enacts Law to Exempt Restoration and Custom Shops From Written Estimate Requirement

SEMA Member Takes Active Role in Legislative Process

  State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right).
Kevin Jack (center) of SEMA member Thunder Road Street Rods & Customs celebrates the bill signing with Washington State Senator Mike Carrell (left) and Senate Staff Counsel Jackson Maynard (right). 
   
A SEMA-supported bill to exempt restoration and custom shops from the requirement that they provide written estimates for the repair of any vehicle that qualifies for a “horseless carriage” or “collector vehicle” license plate or is a “parts car,” “street rod” or “custom vehicle” was signed into law by Governor Chris Gregoire. Effective January 1, 2013, the new law will allow restoration and custom shops to bill at least every two weeks on a time-and-materials basis.

Under Washington law, a “horseless carriage” is a vehicle that is more than 40 years old and is owned and operated as a collector vehicle; a “collector vehicle” is any motor vehicle that is more than 30 years old; a “custom vehicle” is any motor vehicle that is at least 30 years old and of a model year after 1948 or was manufactured to resemble a vehicle at least 30 years old and of a model year after 1948 and has alterations to one or more of the major component parts; a “parts car” is a motor vehicle that is owned by a collector to furnish parts for restoration or maintenance; and a “street rod” is a motor vehicle that is a 1948 or older vehicle or a vehicle manufactured after 1948 to resemble a vehicle manufactured before 1949 and has alterations to one or more of the major component parts.

“Customers of restoration and customization shops have the right to be notified of costs in a timely fashion,” said SEMA Vice President for Government Affairs Steve McDonald.

“Under a SEMA-drafted provision to the new law, restoration and custom shops will be allowed to bill at least every two weeks on a time-and-materials basis. Shops would be able to accurately inform customers of actual costs and materials, removing the vagueness associated with shops attempting to guess probable time for unique tasks and probable costs for unique and in some cases yet-to-be-fabricated, parts.”

  Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
Surrounded by members of the Washington state custom and restoration business community, Governor Chris Gregoire signs into law a bill to exempt restoration and custom shops from the written estimate requirement.
   
The new law is the product of months of consultation with state legislators, regulators and the local business community and was the brainchild of Kevin Jack of SEMA member Thunder Road Street Rods & Customs in Benton City, Washington.

“It was an honor testifying in committee in favor of the bill and being involved in the political process to create positive change,” Jack said.

“This new law, as sponsored by Senators Mike Carrell and Jerome Delvin, recognizes that restoration and custom shops constitute a small portion of shops that work on vehicles and fulfill a unique niche that does not conform to that of standard repair shops. The law will allow us to bill our customers fairly and on a timely basis for the actual work done on these unique vehicles without the unreasonable expectation created by adherence to a written estimate requirement.”

Similar legislation is currently pending in New York and New Jersey and will continue to be pursued by SEMA in states that regulate restoration and custom shops under the same rules that govern straight repair businesses. 

Thu, 04/26/2012 - 16:56

 

  new products
  SEMA's www.semaphotos.com website includes more than 1,700 photos of new products featured in the New Products Showcase at the 2011 SEMA Show.

You know that your product is fantastic, and SEMA would like to present an opportunity to get more hobbyists interested in your latest and greatest.

A major enthusiast publication has requested new product announcements and press releases from SEMA members, regardless of product type.

To take advantage of this opportunity, e-mail Della Domingo at dellad@sema.org and submit your product information as a pdf or Word document.

Looking for products? SEMA's www.semaphotos.com website includes more than 1,700 photos of new products featured in the New Products Showcase at the 2011 SEMA Show. The products can be viewed page by page, or visitors can search by category, including diesel performance, off-road, mobile electronics, racing/motorsports, restyling, street rod/hot rod/custom, street performance and more.

In addition to the high-resolution photos, the photo pages include the product's name, brief description and contact information for the company. To get started, visit www.semaphotos.com.

Thu, 04/26/2012 - 16:56

 

  new products
  SEMA's www.semaphotos.com website includes more than 1,700 photos of new products featured in the New Products Showcase at the 2011 SEMA Show.

You know that your product is fantastic, and SEMA would like to present an opportunity to get more hobbyists interested in your latest and greatest.

A major enthusiast publication has requested new product announcements and press releases from SEMA members, regardless of product type.

To take advantage of this opportunity, e-mail Della Domingo at dellad@sema.org and submit your product information as a pdf or Word document.

Looking for products? SEMA's www.semaphotos.com website includes more than 1,700 photos of new products featured in the New Products Showcase at the 2011 SEMA Show. The products can be viewed page by page, or visitors can search by category, including diesel performance, off-road, mobile electronics, racing/motorsports, restyling, street rod/hot rod/custom, street performance and more.

In addition to the high-resolution photos, the photo pages include the product's name, brief description and contact information for the company. To get started, visit www.semaphotos.com.

Thu, 04/26/2012 - 16:56

 

  new products
  SEMA's www.semaphotos.com website includes more than 1,700 photos of new products featured in the New Products Showcase at the 2011 SEMA Show.

You know that your product is fantastic, and SEMA would like to present an opportunity to get more hobbyists interested in your latest and greatest.

A major enthusiast publication has requested new product announcements and press releases from SEMA members, regardless of product type.

To take advantage of this opportunity, e-mail Della Domingo at dellad@sema.org and submit your product information as a pdf or Word document.

Looking for products? SEMA's www.semaphotos.com website includes more than 1,700 photos of new products featured in the New Products Showcase at the 2011 SEMA Show. The products can be viewed page by page, or visitors can search by category, including diesel performance, off-road, mobile electronics, racing/motorsports, restyling, street rod/hot rod/custom, street performance and more.

In addition to the high-resolution photos, the photo pages include the product's name, brief description and contact information for the company. To get started, visit www.semaphotos.com.

Thu, 04/26/2012 - 16:03

New CAD files for eight GM and five Ford vehicles, as well as 2D prints of the starter for the Ford Big Block V8, have been added to SEMA Tech Transfer. The data-sharing program features thousands of files from participating OEMs—Chrysler, Ford, GM and Scion—and is open to SEMA manufacturing members free of charge.

Tech Transfer is a collaboration between SEMA members, OEMs and SEMA staff, and the intent of the program is to minimize or eliminate the necessity for reverse engineering.

New files are added weekly, and the amount of files and data available is fueled by requests made by SEMA manufacturing members. Here are the latest files added this week:

2012 Cadillac CTS-V

  • Air cleaner assembly
  • Front side-door window switch bezel assembly

2012 Chevrolet Silverado 3500

  • Engine Assembly

2012 Chevrolet Camaro ZL1

  • Steering gear with front suspension and knuckle assembly
  • Rear stabilizer shaft with links assembly

2012 Chevrolet Corvette

  • Front suspension and knuckle assembly
  • Wheel stub assembly

2012 Chevrolet Camaro SS

  • Wheel stub assembly
  • Rear stabilizer shaft with links assembly  

2012 Chevrolet Camaro

  • Rear stabilizer shaft with links assembly 

2006 Chevrolet Silverado 3500

  • Engine mount assembly (6.6L)

1968 Ford Mustang

  • Engine block - SBF - 2D print

2011 Ford SuperDuty

  • DEF reservoir and brackets - 2D print

2011 Ford F-150

  • Heater and radiator hoses  

1970+ Ford Big Block V8

  • Starter - 2D print

2011 Ford Mustang 

  • Decklid hinges

2013 Ford Mustang

  • Radiator, core support and coolant reservoir

To gain access to the files listed above, e-mail techtransfer@sema.org and make a request. Looking for additional files? Check out all that Tech Transfer has to offer by visiting www.SEMA.org/techtransfer.

In addition to SEMA Tech Transfer, the association also provides rapid prototype services as a benefit to SEMA members. This service is available to create ABS plastic prototypes of company designs at a reduced rate available only to SEMA members.

For more information, visit www.sema.org/rapid-prototyping. For additional information or questions about the program, contact techtransfer@sema.org.

Thu, 04/26/2012 - 16:03

New CAD files for eight GM and five Ford vehicles, as well as 2D prints of the starter for the Ford Big Block V8, have been added to SEMA Tech Transfer. The data-sharing program features thousands of files from participating OEMs—Chrysler, Ford, GM and Scion—and is open to SEMA manufacturing members free of charge.

Tech Transfer is a collaboration between SEMA members, OEMs and SEMA staff, and the intent of the program is to minimize or eliminate the necessity for reverse engineering.

New files are added weekly, and the amount of files and data available is fueled by requests made by SEMA manufacturing members. Here are the latest files added this week:

2012 Cadillac CTS-V

  • Air cleaner assembly
  • Front side-door window switch bezel assembly

2012 Chevrolet Silverado 3500

  • Engine Assembly

2012 Chevrolet Camaro ZL1

  • Steering gear with front suspension and knuckle assembly
  • Rear stabilizer shaft with links assembly

2012 Chevrolet Corvette

  • Front suspension and knuckle assembly
  • Wheel stub assembly

2012 Chevrolet Camaro SS

  • Wheel stub assembly
  • Rear stabilizer shaft with links assembly  

2012 Chevrolet Camaro

  • Rear stabilizer shaft with links assembly 

2006 Chevrolet Silverado 3500

  • Engine mount assembly (6.6L)

1968 Ford Mustang

  • Engine block - SBF - 2D print

2011 Ford SuperDuty

  • DEF reservoir and brackets - 2D print

2011 Ford F-150

  • Heater and radiator hoses  

1970+ Ford Big Block V8

  • Starter - 2D print

2011 Ford Mustang 

  • Decklid hinges

2013 Ford Mustang

  • Radiator, core support and coolant reservoir

To gain access to the files listed above, e-mail techtransfer@sema.org and make a request. Looking for additional files? Check out all that Tech Transfer has to offer by visiting www.SEMA.org/techtransfer.

In addition to SEMA Tech Transfer, the association also provides rapid prototype services as a benefit to SEMA members. This service is available to create ABS plastic prototypes of company designs at a reduced rate available only to SEMA members.

For more information, visit www.sema.org/rapid-prototyping. For additional information or questions about the program, contact techtransfer@sema.org.