Thu, 02/28/2013 - 14:35

By SEMA Washington, D.C., Staff

West Virginia Delegate Gary Howell has introduced a concurrent resolution urging the Environmental Protection Agency (EPA) to revoke its decision to allow the sale of gasoline with 15% ethanol (E15) until there is clear and convincing scientific evidence that E15 does not pose a risk to any gasoline-powered vehicle or equipment. Among other things, the resolution recognizes that ethanol increases water formation, which can then create formic acid and corrode metals, plastics and rubber, especially over a period of time when the vehicle is not used. Current high-performance specialty parts, along with the pre-’01 cars and parts, may be most susceptible to corrosion. 

For more information, visit the SEMA Action Network (SAN) website. For details, contact Steve McDonald at stevem@sema.org.

Thu, 02/28/2013 - 14:35

By SEMA Washington, D.C., Staff

West Virginia Delegate Gary Howell has introduced a concurrent resolution urging the Environmental Protection Agency (EPA) to revoke its decision to allow the sale of gasoline with 15% ethanol (E15) until there is clear and convincing scientific evidence that E15 does not pose a risk to any gasoline-powered vehicle or equipment. Among other things, the resolution recognizes that ethanol increases water formation, which can then create formic acid and corrode metals, plastics and rubber, especially over a period of time when the vehicle is not used. Current high-performance specialty parts, along with the pre-’01 cars and parts, may be most susceptible to corrosion. 

For more information, visit the SEMA Action Network (SAN) website. For details, contact Steve McDonald at stevem@sema.org.

Thu, 02/28/2013 - 14:28

By SEMA Washington, D.C., Staff

Legislation to increase the age requirement for vehicles eligible for registration as “antique, rare or special-interest motor vehicles” or “modified antique motor vehicles” has been reintroduced in the Connecticut State Legislature. Under the bill, vehicles seeking registration as antique, rare or special-interest motor vehicles or as modified antique motor vehicles would be required to be at least 30 years old. Currently, vehicles 20 years old or older are eligible for this status and special license plates. 

For the purpose of property taxes, the bill also increases the maximum assessment of these vehicles from $500 to $2,500. The measure, which SEMA is opposing, makes no provision for “grandfathering” existing antique, rare or special-interest motor vehicles or modified antique motor vehicles that are 20–30 years old and allowing them to retain their current registration status. 

For more information, visit the SEMA Action Network (SAN) website. For details, contact Steve McDonald at stevem@sema.org.

Thu, 02/28/2013 - 14:28

By SEMA Washington, D.C., Staff

Legislation to increase the age requirement for vehicles eligible for registration as “antique, rare or special-interest motor vehicles” or “modified antique motor vehicles” has been reintroduced in the Connecticut State Legislature. Under the bill, vehicles seeking registration as antique, rare or special-interest motor vehicles or as modified antique motor vehicles would be required to be at least 30 years old. Currently, vehicles 20 years old or older are eligible for this status and special license plates. 

For the purpose of property taxes, the bill also increases the maximum assessment of these vehicles from $500 to $2,500. The measure, which SEMA is opposing, makes no provision for “grandfathering” existing antique, rare or special-interest motor vehicles or modified antique motor vehicles that are 20–30 years old and allowing them to retain their current registration status. 

For more information, visit the SEMA Action Network (SAN) website. For details, contact Steve McDonald at stevem@sema.org.

Thu, 02/28/2013 - 14:28

By SEMA Washington, D.C., Staff

Legislation to increase the age requirement for vehicles eligible for registration as “antique, rare or special-interest motor vehicles” or “modified antique motor vehicles” has been reintroduced in the Connecticut State Legislature. Under the bill, vehicles seeking registration as antique, rare or special-interest motor vehicles or as modified antique motor vehicles would be required to be at least 30 years old. Currently, vehicles 20 years old or older are eligible for this status and special license plates. 

For the purpose of property taxes, the bill also increases the maximum assessment of these vehicles from $500 to $2,500. The measure, which SEMA is opposing, makes no provision for “grandfathering” existing antique, rare or special-interest motor vehicles or modified antique motor vehicles that are 20–30 years old and allowing them to retain their current registration status. 

For more information, visit the SEMA Action Network (SAN) website. For details, contact Steve McDonald at stevem@sema.org.

Thu, 02/28/2013 - 14:25

By SEMA Washington, D.C., Staff  

Legislation to exempt from emissions inspections those vehicles that have not yet reached their 10th model year was denied approval by the Colorado Senate Transportation Committee on a 3–1 vote. Current law only exempts vehicles that are four model years old or newer. The bill would have also exempted previously registered motor vehicles that have never failed an emissions-control inspection and created a senior citizen hardship exemption whereby a senior citizen could register one motor vehicle without obtaining an emissions inspection. 

For details, contact Steve McDonald at stevem@sema.org.

Thu, 02/28/2013 - 14:25

By SEMA Washington, D.C., Staff  

Legislation to exempt from emissions inspections those vehicles that have not yet reached their 10th model year was denied approval by the Colorado Senate Transportation Committee on a 3–1 vote. Current law only exempts vehicles that are four model years old or newer. The bill would have also exempted previously registered motor vehicles that have never failed an emissions-control inspection and created a senior citizen hardship exemption whereby a senior citizen could register one motor vehicle without obtaining an emissions inspection. 

For details, contact Steve McDonald at stevem@sema.org.

Thu, 02/28/2013 - 13:53

By Arlene Wood

  councils
SEMA's council leaders.
   

Nominations for a Select Committee seat on one of SEMA's councils and member networks are now open.

Do you have a business challenge that goes beyond the walls of your shop? See a change in the market that needs to be made? Have an idea but need some industry muscle to make it happen? Then it may be time for you to volunteer to be an industry leader and make your voice heard.

The Select Committee serves as the volunteer leadership body for the entire membership of a specific council or network. These volunteers are in tune with their market and have the drive needed to influence change. Elected volunteers are entrusted to direct SEMA resources toward building solutions to matters facing the industry, benefits and opportunities that help companies succeed and prosper. 
There are currently 10 council and network groups within SEMA, and each represents a collection of SEMA members who share a common business purpose or market segment. Councils work to identify related business goals, issues and challenges that require a special focus by the association.

Find out who is currently involved in SEMA's councils and networks and follow the link to the group that supports your interests.

Get started now by using the online council nominations form; it's quick and easy to complete, and no printing or faxing is required. All nominations must be received by 5:00 p.m. (PDT) March 22, 2013.



For more information on SEMA's councils and committees or the nomination and election process, contact Arlene Wood at arlenew@sema.org.

Thu, 02/28/2013 - 13:53

By Arlene Wood

  councils
SEMA's council leaders.
   

Nominations for a Select Committee seat on one of SEMA's councils and member networks are now open.

Do you have a business challenge that goes beyond the walls of your shop? See a change in the market that needs to be made? Have an idea but need some industry muscle to make it happen? Then it may be time for you to volunteer to be an industry leader and make your voice heard.

The Select Committee serves as the volunteer leadership body for the entire membership of a specific council or network. These volunteers are in tune with their market and have the drive needed to influence change. Elected volunteers are entrusted to direct SEMA resources toward building solutions to matters facing the industry, benefits and opportunities that help companies succeed and prosper. 
There are currently 10 council and network groups within SEMA, and each represents a collection of SEMA members who share a common business purpose or market segment. Councils work to identify related business goals, issues and challenges that require a special focus by the association.

Find out who is currently involved in SEMA's councils and networks and follow the link to the group that supports your interests.

Get started now by using the online council nominations form; it's quick and easy to complete, and no printing or faxing is required. All nominations must be received by 5:00 p.m. (PDT) March 22, 2013.



For more information on SEMA's councils and committees or the nomination and election process, contact Arlene Wood at arlenew@sema.org.

Thu, 02/28/2013 - 13:53

By Arlene Wood

  councils
SEMA's council leaders.
   

Nominations for a Select Committee seat on one of SEMA's councils and member networks are now open.

Do you have a business challenge that goes beyond the walls of your shop? See a change in the market that needs to be made? Have an idea but need some industry muscle to make it happen? Then it may be time for you to volunteer to be an industry leader and make your voice heard.

The Select Committee serves as the volunteer leadership body for the entire membership of a specific council or network. These volunteers are in tune with their market and have the drive needed to influence change. Elected volunteers are entrusted to direct SEMA resources toward building solutions to matters facing the industry, benefits and opportunities that help companies succeed and prosper. 
There are currently 10 council and network groups within SEMA, and each represents a collection of SEMA members who share a common business purpose or market segment. Councils work to identify related business goals, issues and challenges that require a special focus by the association.

Find out who is currently involved in SEMA's councils and networks and follow the link to the group that supports your interests.

Get started now by using the online council nominations form; it's quick and easy to complete, and no printing or faxing is required. All nominations must be received by 5:00 p.m. (PDT) March 22, 2013.



For more information on SEMA's councils and committees or the nomination and election process, contact Arlene Wood at arlenew@sema.org.