Wed, 06/18/2014 - 10:14
SEMA News—July 2014

LEGISLATIVE AND TECHNICAL AFFAIRS
By Steve McDonald

Law and Order

STATE UPDATE

Alabama Vintage Vehicles: Legislation to authorize the owner of a vintage vehicle to keep the permanent vintage tag but pay regular license taxes and registration fees for the privilege of operating the vehicle for general transportation purposes died when the legislature adjourned for the year. The bill was not given committee consideration. Under the bill, the vehicle owner would have been required to maintain and show proof of mandatory liability insurance coverage. Under existing law, vintage vehicles may be used only in club activities, exhibitions, tours and parades but not for general transportation purposes.

Arizona Emissions: Legislation to create a rolling emissions-inspection exemption for vehicles that are 40 years old or older was not considered in committee before the mandatory deadline. The bill is dead for the year. Arizona already has a 2011 law on the books to exempt all vehicles manufactured in model-year ’74 and earlier from the state’s mandatory biennial emissions-inspection program. However, it has yet to take effect. Arizona regulators must first update the state’s air-quality plan and demonstrate that the exemption will not impact Arizona’s compliance with clean-air requirements. The updated plan must then be approved by the U.S. Environmental Protection Agency (EPA). The Arizona Department of Environmental Quality has indicated that it intends to submit a revised air-quality plan to the EPA by early 2015. The EPA will then have another 18 months to approve or reject the changes.

Colorado Collector Cars: Legislation that originally repealed the six-year limitation for applying a salvage brand to a motor vehicle whose cost of being repaired exceeded its value was approved by the House and Senate and now goes to the governor for his signature and enactment into law. A SEMA-supported amendment to the bill protects from the salvage brand all vehicles that qualify as collector’s items, horseless carriages or street rods at the time of damage. The measure now protects collector cars from a permanent “salvage” blemish on the vehicle’s title, which would have made it suspect even if the vehicle is expertly restored or modified.

SEMA-opposed legislation that would have provided counties with the authority to remove from private property motor vehicles deemed to be a “nuisance” died when the legislature adjourned for the year. In Kansas, maintaining a public nuisance means “intentionally causing or permitting a condition to exist which injures or endangers the public health, safety or welfare.” This definition provides no real guidance for motor-vehicle owners maintaining inoperable vehicles on private property. Kansas Inoperable Vehicles: SEMA-opposed legislation that would have provided counties with the authority to remove from private property motor vehicles deemed to be a “nuisance” died when the legislature adjourned for the year. In Kansas, maintaining a public nuisance means “intentionally causing or permitting a condition to exist which injures or endangers the public health, safety or welfare.” This definition provides no real guidance for motor-vehicle owners maintaining inoperable vehicles on private property.

Kentucky Property Tax: Kentucky legislation to change the valuation procedure on vehicles for purposes of the property tax died when the legislature adjourned for the year. The bill would have put a new valuation procedure in place for older vehicles. Vehicles 20 years old or older would no longer have been presumed to be in “original factory” or “classic” condition. The measure instead provided three options for assessing the value of these vehicles. The bill preserved the tax assessor’s ability to deviate from this valuation formula if information is available to warrant such a deviation from standard value. Newer vehicles would have been valued at the “average trade-in” value rather than the higher “clean trade-in” value.

SEMA ACTION NETWORKLouisiana Collector Cars: Legislation to annually designate the Friday, Saturday and Sunday of the second weekend in July as “Louisiana Collector Car Appreciation Weekend” was approved by the Senate Judiciary Committee and now moves to the floor of the Senate for a vote by all members. The bill has already been approved by the full House of Representatives. Earlier this year, SEMA announced these dates to mark the fifth commemoration in what has become an annual event to raise awareness of the vital role automotive restoration and collection plays in American society. SEMA is again working to secure a U.S. Congressional resolution to recognize the day’s significance.

Minnesota Classic Cars: Legislation to provide for a program that will allow classic-car status to be determined from nationally recognized standards and guides was approved by the full Senate. Having already been passed by the House, the bill now moves to the governor for his signature and enactment into law. Under the current system, this status must be designated by the state through a time-consuming amendment to the law.

Nebraska Automobile Museums: A SEMA-supported bill to exempt purchases made by historic-automobile museums from sales and use taxes was signed into law by Governor Dave Heineman. Under the new law, a historic-automobile museum is “a museum that is used to maintain and exhibit a collection of at least two hundred motor vehicles and was open to the public an average of four or more hours per week during the previous calendar year.” The law exempts these museums from sales and use taxes on the gross receipts from the sale, lease or rental of and the storage, use or other consumption of purchases of items that are displayed or held for display and that are related to the general purpose of the museum.

Nebraska Headlamps: A SEMA-opposed bill to require headlamps to be “clear or of a white color” died when the legislature adjourned for the year. SEMA had urged the bill sponsor to amend the measure to conform to federal standards regarding headlamps. Under the federal standards, it is possible to design a headlamp that can be perceived as having a blue tint but that nevertheless remains within the federal boundaries that define “white.”

New Hampshire Year-of-Manufacture Plates: Legislation to expand the range of vehicles eligible to use original year-of-manufacture license plates on antique motor vehicles was approved by the Senate Transportation Committee and now moves to a vote by the full Senate. The bill has already been passed by the House of Representatives. Currently, only ’60-and-earlier model-year antique vehicles are eligible to use these plates. Under the bill, eligibility would be expanded to include all ’75-and-earlier model years.

New Hampshire Ethanol: Legislation to prohibit a person from selling or offering for sale gasoline that contains more than 10% of corn-based ethanol was approved by the House of Representatives. If enacted, the law would take effect only if any two additional New England states adopt similar legislation limiting the amount of corn-based ethanol in gasoline to 10%. The bill is now being considered by the Senate Transportation Committee.

New York Plates: A bill to authorize the owner of a motor vehicle, for a $50 annual fee, to display a single license plate on the rear of the vehicle will be considered by the Assembly Transportation Committee. The measure would help protect the aesthetic contours of certain vehicles and relieve vehicle owners of the burden and expense of having to create mounting holes on some original bumpers. The funds collected under the bill would be used to help provide emergency services.

A bill that originally required headlights on motor vehicles to display a “white light” without defining the term was signed into law by Governor John Kasich. A SEMA amendment that was included in the bill now conforms the new law to federal standards regarding headlamp color, with which all headlamps destined for on-road use must comply.Ohio Headlamps: A bill that originally required headlights on motor vehicles to display a “white light” without defining the term was signed into law by Governor John Kasich. A SEMA amendment that was included in the bill now conforms the new law to federal standards regarding headlamp color, with which all headlamps destined for on-road use must comply. All headlamps are required to comply with the color requirements contained in the Federal Motor Vehicle Safety Standards. It is illegal for a state to enact a law that would conflict with a federal standard. Under the federal standards, it is possible to design a headlamp that can be perceived as having a blue tint but that nevertheless remains within the federal boundaries that define “white.”

Rhode Island License Plates: Legislation to authorize the state to issue replica year-of-manufacture plates for antique vehicles was introduced. The bill also allows the state to approve for use plates that were issued in the exact year of manufacture of the vehicle. In Rhode Island, an antique motorcar is “any motor vehicle which is more than twenty-five (25) years old. Unless fully inspected and meeting inspection requirements, the vehicle may be maintained solely for use in exhibitions, club activities, parades, and other functions of public interest and may not be used primarily for the transportation of passengers or goods over any public highway.”

Wisconsin Historical Plates: A bill to allow the display, on collector vehicles manufactured before 1979, of one or two historical registration plates from or representing the model year of the vehicle was signed into law by Governor Scott Walker. Under the new law, these plates could be used if the vehicle is being operated to or from a car show or parade and any current registration plate issued for the vehicle is carried in the vehicle. In Wisconsin, a vehicle is eligible for registration as a collector vehicle if the vehicle is at least 20 years old, has not been altered and is being preserved for its historic interest or if the vehicle is at least 25 years old and is a certain type of former military vehicle.

Wisconsin License Plates: Legislation to require that motor vehicles display only a single license plate on the rear of the vehicle died when the legislature adjourned for the year. The bill did not receive committee consideration. The measure would have saved money, conserved resources and brought Wisconsin in line with other states that have moved to a single-plate requirement. The bill also would have protected the design contours of collector cars and relieved vehicle owners of the burden of having to create mounting holes on some fabricated and original bumpers.

FEDERAL UPDATE

Expired Tax Credits: Since the U.S. House of Representatives will likely not tackle comprehensive tax reform in 2014, lawmakers are drafting legislation to extend a variety of yearly tax breaks that expired at the end of 2013. The Senate Finance Committee has already approved and sent to the Senate floor a bill containing a number of such measures. Of interest to the business community, the SEMA-supported Senate bill would provide a two-year extension, through 2015, for the research-and-development tax credit. It would also extend the 50% bonus depreciation for qualified property purchased before January 1, 2016. Section 179 expensing would be restored for one more year at the maximum $500,000 deduction, with a $2 million phase-out level. Absent the renewal, the allowance reverts to $25,000, with a $200,000 phase-out level.

“National” OHV Recreation Area: A SEMA-supported bill has been introduced in Congress to include the word “National” within the title “Johnson Valley Off-Highway Vehicle Recreation Area.” The legislation follows last December’s success when Congress passed a law ending a six-year clash between the military and off-highway vehicle (OHV) users over access to thousands of acres of Southern California desert. More than 96,000 acres will continue to be maintained by the U.S. Bureau of Land Management as an OHV recreation area, with other lands being transferred to the adjoining Twentynine Palms Marine Corps base for military training needs. The area contains a unique mix of open desert, dry-lake beds and formidable rock-crawling formations and hosts the famous “King of the Hammers” race, which will continue unhampered. Johnson Valley is the nation’s first federal OHV area, and the word addition will acknowledge the land’s national significance.

Endangered Species Act Reform: The U.S. House Natural Resources Committee approved four bills to reform aspects of the Endangered Species Act (ESA). The bills have been sent to the House floor. The bills would require the U.S. Fish and Wildlife Service to release data used to make listings of threatened or endangered animals and plants, report how much money is spent on ESA-related lawsuits, and place a cap on plaintiff-attorney reimbursement fees. Despite agreeing that the law is flawed, Republicans and Democrats are generally deadlocked on how to comprehensively update the 40-year-old ESA. Millions of acres of land have been set aside to protect threatened or endangered animals and plants, with few tangible results beyond lawsuits and attorney fees. Scores of OHV roads and trails have been unnecessarily closed as a consequence. SEMA supports an alternative approach that focuses on establishing and managing smaller recovery zones.


 

Thu, 06/12/2014 - 15:50

By SEMA Editors

The SEMA Data Co-op (SDC) is looking to hire a membership manager to recruit, manage and maintain member relationships, in addition to assisting the director of membership with marketing matters for event preparation and other SDC promotions.

Responsibilities will include:

  • Actively participating in SDC membership recruitment, assisting members during on-boarding and being an important point-of-contact for member inquiries.  
  • Actively participating in membership outreach efforts, including but not limited to the following:
    1. Following up of leads from every source, including website and referrals.
    2. Proactive prospecting based on industry knowledge, networking and SEMA member lists.
    3. Consistent follow-up on progress and satisfaction of members.
  • Attending industry events (e.g., SEMA Show, PWA, PRI, etc.) where recruitment and retention is a primary focus.
  • Actively participating in SDC member benefits, including but not limited to the following:
    1. Coordination with the Help Desk on any member service issues.
    2. Compilation and communication of member feedback to the Help Desk.
    3. Implementing any new SDC benefits or programs.
  • Assisting with the development of new content related to member benefits for any available venue, including:
    1. www.SEMADataCoop.org.
    2. SEMA News.
    3. SEMA eNews.
    4. Program-related e-mail communications.
  • Participating in interaction with SEMA councils, committees and networks to educate and enable effective SDC communications.
  • Other duties as assigned by the director of membership or senior management team of the SDC.

Primary Skills and Requirements:

  • Be an enthusiastic ambassador of the SDC to members and prospects.
  • Have effective supervisory and leadership skills.
  • Have strong sales and presentation skills.
  • Proficiency in Microsoft Office applications and association management software.
  • Be a skilled communicator with strong organizational and facilitation skills both on the phone and face to face.
  • A willingness to learn new software programs.
  • A four-year college degree is required.
  • Project management experience is preferred.

This position will be located in SEMA's Diamond Bar, California, office, and will report to the director of membership of the SEMA Data Co-op. The candidate will interact with SEMA staff in all departments, the Help Desk and other outsourced staff. This job description is not intended to be and should not be construed as an all-inclusive list of all responsibilities, skills, relationships or working conditions associated with the position. While it is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add or remove duties and to assign other duties as necessary.

Qualified candidates should send their resumes to Linda Czarkowski at lindac@sema.org.

Thu, 06/12/2014 - 15:50

By SEMA Editors

The SEMA Data Co-op (SDC) is looking to hire a membership manager to recruit, manage and maintain member relationships, in addition to assisting the director of membership with marketing matters for event preparation and other SDC promotions.

Responsibilities will include:

  • Actively participating in SDC membership recruitment, assisting members during on-boarding and being an important point-of-contact for member inquiries.  
  • Actively participating in membership outreach efforts, including but not limited to the following:
    1. Following up of leads from every source, including website and referrals.
    2. Proactive prospecting based on industry knowledge, networking and SEMA member lists.
    3. Consistent follow-up on progress and satisfaction of members.
  • Attending industry events (e.g., SEMA Show, PWA, PRI, etc.) where recruitment and retention is a primary focus.
  • Actively participating in SDC member benefits, including but not limited to the following:
    1. Coordination with the Help Desk on any member service issues.
    2. Compilation and communication of member feedback to the Help Desk.
    3. Implementing any new SDC benefits or programs.
  • Assisting with the development of new content related to member benefits for any available venue, including:
    1. www.SEMADataCoop.org.
    2. SEMA News.
    3. SEMA eNews.
    4. Program-related e-mail communications.
  • Participating in interaction with SEMA councils, committees and networks to educate and enable effective SDC communications.
  • Other duties as assigned by the director of membership or senior management team of the SDC.

Primary Skills and Requirements:

  • Be an enthusiastic ambassador of the SDC to members and prospects.
  • Have effective supervisory and leadership skills.
  • Have strong sales and presentation skills.
  • Proficiency in Microsoft Office applications and association management software.
  • Be a skilled communicator with strong organizational and facilitation skills both on the phone and face to face.
  • A willingness to learn new software programs.
  • A four-year college degree is required.
  • Project management experience is preferred.

This position will be located in SEMA's Diamond Bar, California, office, and will report to the director of membership of the SEMA Data Co-op. The candidate will interact with SEMA staff in all departments, the Help Desk and other outsourced staff. This job description is not intended to be and should not be construed as an all-inclusive list of all responsibilities, skills, relationships or working conditions associated with the position. While it is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add or remove duties and to assign other duties as necessary.

Qualified candidates should send their resumes to Linda Czarkowski at lindac@sema.org.

Thu, 06/12/2014 - 15:45

Compiled by SEMA Editors

SCORE Imperial Valley 250 to Air This Weekend
The SCORE Imperial Valley 250 will air this Sunday, June 15, at 9:00 p.m. (EDT) on CBS Sports Network. This is the second of five races that encompass the 2014 SCORE World Desert Championship. Check out the video promo below.

McLeod Racing Celebrates Being Named Official Clutch of the NASCAR Racing Experience With Free Giveaway
McLeod Racing has been chosen to be the official clutch of the NASCAR Racing Experience, which gives individuals the chance to get behind the wheel of a true NASCAR race car. These cars are subject to a lot of use with a lot of different drivers on many different style tracks. For that reason, a clutch that was driver-friendly yet durable was needed. McLeod Racing will celebrate this relationship by offering a McLeod Newsletter recipient a free NASCAR Racing Experience. Visit www.mcleodracing.com and sign up for the newsletter to be entered.

  hart
Kyle Hart soars in Round 6 qualifying at Wild West Motorsports Park.
  

Kyle Hart Delivers a Podium Performance and First Career Win in Pro Lite at Reno
Kyle Hart and his ReadyLift Off Road Suspension/Kolpin Dodge Pro Lite team are celebrating this week with his first career win in this division. In Round 6 of the Pro Lite Division, Hart finished the qualifier in second between RJ Anderson and Brian Deegan. During the night race on lap 25, Hart took the lead and placed Jimmy Fishback and Sheldon Creed into second and third respectively. The next stop on the Lucas Oil Off Road Racing Series will be Miller Motorsports Park in Tooele, Utah, for rounds 7 and 8, June 21–22.

NMCA WEST Races at Pomona Raceway
The third-annual Nitto Tire NMCA WEST Street Car Nationals, held last month at the Auto Club Raceway in Pomona, California, included some of the best stars from all over the country. Susan Roush McClenaghan qualified second in the Currie Enterprises Open Comp class in her propane-powered ’10 Mustang. Donnie Bowles raced in Open Comp and the Granatelli Motor Sports Mustang Madness class, where he took home a Wally by beating Greg Dreher in the finals. Scott Oksas took the top qualifying spot in Garrett Turbochargers Pro Mod with John Mihovetz right behind him. The top-five qualifiers reached more than 220 mph at the famed quarter-mile. Andrew Berry claimed the weekend's bragging rights and the Aerospace Components NHRA Unleashed Wally after a battle against Mihovetz in the final round. Visit www.NMCAdigital.com for complete race results.

turner
Tommy Turner and the Turner Racing Team won the Top Sportsman class at the 34th Annual Summit Racing Equipment NHRA Southern Nationals using Holley's Dominator EFI system.
 
  

Turner Wins NHRA Top Sportsman with Holley Dominator EFI
Tommy Turner and the Turner Racing Team won the Top Sportsman class at the 34th Annual Summit Racing Equipment NHRA Southern Nationals, held May 16–18, at Atlanta Dragway in Commerce, Georgia. Turner and crew had switched to Holley's Dominator EFI only weeks before the event, and made a visit to Holley's R&D facility to fine tune the normally aspirated 904cid Steve Schmidt Racing engine, which, in the Turner Racing Pontiac GXP, makes more than 1,800 hp using the Holley Dominator EFI system. The Holley Dominator EFI Vehicle Management System works with all engine applications, from street to unlimited high–end racing. The system has nearly unlimited capabilities to control normally-aspirated single or dual throttle body applications and engines with any supercharged, turbo, nitrous and water-methanol power adders. The Dominator EFI also controls GM transmission functions, drive by wire throttle bodies and features inputs for data acquisition and more.

  lombardi
Tony Lombardi’s supercharged ’30 Model A Ford from Niles, Ohio, won the Goodguys 2014 Tank’s Hot Rod of the Year award last weekend at the Indiana State Fairgrounds.
  

Supercharged Model A wins Goodguys 2014 Tank’s Hot Rod of the Year Award
Tony Lombardi’s supercharged ’30 Model A Ford from Niles, Ohio, won the Goodguys 2014 Tank’s Hot Rod of the Year award last weekend at the Indiana State Fairgrounds. The criteria is unique in that it’s the only major Goodguys Top 12 award which requires participants to drive on a 100-mile reliability run as well as an 1/8th-mile blast down the dragstrip. Lombardi’s A-Bone, built by Hilton’s Hot Rods, blasted down Lucas Oil Raceway at Indianapolis with an elapsed time of 9.316 seconds—the third-fastest ET of the day.

Painted PPG Manderin Maroon with black steel wheels, ’40 Ford hubcaps, finned drums and a healthy dropped axle rake, the coupe plays on the heartstrings of traditional hot-rod aficionados. The 371cid blown Oldsmobile Rocket 88 engine, built in-house by Lombardi’s Ross Racing engines, features a Dyer’s 4-71 blower atop a Cragar intake with 94-series carbs. A Tremec T-5 transmission and Winter’s quick-change rear end ensure a sporty drive and spirited stop light sprints. The black leather interior was stitched by Mike Sholly. The cabin is comfortable, yet all business with a custom bench seat. The dash (out of a Pierce Arrow) houses the Stewart Warner gauges. At the ready is a Hurst shifter and Schroeder steering wheel.

For winning the Hot Rod of the Year award, Lombardi will be one of the Top 12 featured cars of the Goodguys event season. He’ll receive a custom toolbox from Snap-on and travel accommodations to the season-ending Goodguys 17th Southwest Nationals, November 14–16, at Westworld, in Scottsdale, Arizona. The top five finalists for the Goodguys 2014 Tank’s Hot Rod of the Year award included William Shores (’32 Ford), Tony Lombardi (’30 Ford), Bruce Vath (’36 Ford), Kevin Roberts (’32 Ford), and Garey Roberts (’32 Ford).

  olsbergs
Patrik Sandell leads the way at X Games in the Kobalt Tools/OMSE Ford Fiesta ST. Photo credit: OMSE
  

Olsbergs MSE Fords Fast at X Games Tight Racing in Austin for Second Round of Red Bull Global Rallycross
The second round of Red Bull Global Rallycross joined X Games in Austin, Texas, for two days of action on a tight, half-mile dirt and tarmac course built into the Circuit of the Americas. Olsbergs MSE drivers Patrik Sandell and Joni Wiman both qualified at the top of a competitive 19-car field. Sandell, in the Kobalt Tools Olsbergs MSE Ford Fiesta ST, finished at the front of every qualifying match and earned a position on the front row of the Final where he was issued a penalty that knocked him out of podium contention. Wiman, in the Red Bull/Bluebeam Olsbergs MSE Ford Fiesta ST, was unable to land a spot in the six-car Final.

In addition to the Supercars competition, a full roster of GRC Lites joined the series last weekend for the first race of the season. Red Bull/Olsbergs MSE GRC Lites driver Mitchell DeJong earned X Games gold, while teammate Kevin Eriksson scored the silver medal in his Olsbergs MSE GRC Lites car. The GRC Lites are purpose-built 310-hp rallycross racers designed and built by Olsbergs MSE and introduced to GRC in 2013 as a development series for the sport of rallycross.

The team will next appear in competition with World RX drivers Andreas Bakkerud and Reinis Nitiss at World RX of Norway in Hell, Norway, June 14–15. Olsbergs MSE's Red Bull Global Rallycross drivers are back in action for the Washington, D.C., championship stop June 21–22.

  pulstar
Al Unser Jr. returned to the winner’s circle at the Indianapolis Motor Speedway earlier this week in the Charity Indy Legends Pro-Am Race. Photo credit: Dana Garret
  

Pulstar Performance Expert Al Unser Jr. Wins Again at Indianapolis Motor Speedway
Pulstar Pulse Plugs Performance expert Al Unser Jr. returned to the winner’s circle at the Indianapolis Motor Speedway earlier this week in the Charity Indy Legends Pro-Am Race. Unser Jr. and his amateur partner Peter Klutt took the top prize on the track’s road course in the marquee event of the three-day inaugural SVRA Brickyard Vintage Racing Invitational. Unser Jr., a two-time winner of the Indianapolis 500, participated in the 45-minute race that paired former Indy 500 drivers with amateurs to race vintage, ’63–’72 Chevrolet Camaros, Chevrolet Corvettes and Ford Mustangs. Unser and Klutt, president of Legendary Motorcar Co. and a former TV show host, drove Klutt’s ’69 Corvette to the win. Unser was one of 24 Indy 500 veterans in the field that included drivers Eliseo Salazar (who finished second with Gary Moore), Willy T. Ribbs (third-place winner with Ed Sevadjian), Buddy Lazier, Scott Goodyear, Mark Dismore, Robby Unser and Lyn St. James.

Thu, 06/12/2014 - 15:45

Compiled by SEMA Editors

SCORE Imperial Valley 250 to Air This Weekend
The SCORE Imperial Valley 250 will air this Sunday, June 15, at 9:00 p.m. (EDT) on CBS Sports Network. This is the second of five races that encompass the 2014 SCORE World Desert Championship. Check out the video promo below.

McLeod Racing Celebrates Being Named Official Clutch of the NASCAR Racing Experience With Free Giveaway
McLeod Racing has been chosen to be the official clutch of the NASCAR Racing Experience, which gives individuals the chance to get behind the wheel of a true NASCAR race car. These cars are subject to a lot of use with a lot of different drivers on many different style tracks. For that reason, a clutch that was driver-friendly yet durable was needed. McLeod Racing will celebrate this relationship by offering a McLeod Newsletter recipient a free NASCAR Racing Experience. Visit www.mcleodracing.com and sign up for the newsletter to be entered.

  hart
Kyle Hart soars in Round 6 qualifying at Wild West Motorsports Park.
  

Kyle Hart Delivers a Podium Performance and First Career Win in Pro Lite at Reno
Kyle Hart and his ReadyLift Off Road Suspension/Kolpin Dodge Pro Lite team are celebrating this week with his first career win in this division. In Round 6 of the Pro Lite Division, Hart finished the qualifier in second between RJ Anderson and Brian Deegan. During the night race on lap 25, Hart took the lead and placed Jimmy Fishback and Sheldon Creed into second and third respectively. The next stop on the Lucas Oil Off Road Racing Series will be Miller Motorsports Park in Tooele, Utah, for rounds 7 and 8, June 21–22.

NMCA WEST Races at Pomona Raceway
The third-annual Nitto Tire NMCA WEST Street Car Nationals, held last month at the Auto Club Raceway in Pomona, California, included some of the best stars from all over the country. Susan Roush McClenaghan qualified second in the Currie Enterprises Open Comp class in her propane-powered ’10 Mustang. Donnie Bowles raced in Open Comp and the Granatelli Motor Sports Mustang Madness class, where he took home a Wally by beating Greg Dreher in the finals. Scott Oksas took the top qualifying spot in Garrett Turbochargers Pro Mod with John Mihovetz right behind him. The top-five qualifiers reached more than 220 mph at the famed quarter-mile. Andrew Berry claimed the weekend's bragging rights and the Aerospace Components NHRA Unleashed Wally after a battle against Mihovetz in the final round. Visit www.NMCAdigital.com for complete race results.

turner
Tommy Turner and the Turner Racing Team won the Top Sportsman class at the 34th Annual Summit Racing Equipment NHRA Southern Nationals using Holley's Dominator EFI system.
 
  

Turner Wins NHRA Top Sportsman with Holley Dominator EFI
Tommy Turner and the Turner Racing Team won the Top Sportsman class at the 34th Annual Summit Racing Equipment NHRA Southern Nationals, held May 16–18, at Atlanta Dragway in Commerce, Georgia. Turner and crew had switched to Holley's Dominator EFI only weeks before the event, and made a visit to Holley's R&D facility to fine tune the normally aspirated 904cid Steve Schmidt Racing engine, which, in the Turner Racing Pontiac GXP, makes more than 1,800 hp using the Holley Dominator EFI system. The Holley Dominator EFI Vehicle Management System works with all engine applications, from street to unlimited high–end racing. The system has nearly unlimited capabilities to control normally-aspirated single or dual throttle body applications and engines with any supercharged, turbo, nitrous and water-methanol power adders. The Dominator EFI also controls GM transmission functions, drive by wire throttle bodies and features inputs for data acquisition and more.

  lombardi
Tony Lombardi’s supercharged ’30 Model A Ford from Niles, Ohio, won the Goodguys 2014 Tank’s Hot Rod of the Year award last weekend at the Indiana State Fairgrounds.
  

Supercharged Model A wins Goodguys 2014 Tank’s Hot Rod of the Year Award
Tony Lombardi’s supercharged ’30 Model A Ford from Niles, Ohio, won the Goodguys 2014 Tank’s Hot Rod of the Year award last weekend at the Indiana State Fairgrounds. The criteria is unique in that it’s the only major Goodguys Top 12 award which requires participants to drive on a 100-mile reliability run as well as an 1/8th-mile blast down the dragstrip. Lombardi’s A-Bone, built by Hilton’s Hot Rods, blasted down Lucas Oil Raceway at Indianapolis with an elapsed time of 9.316 seconds—the third-fastest ET of the day.

Painted PPG Manderin Maroon with black steel wheels, ’40 Ford hubcaps, finned drums and a healthy dropped axle rake, the coupe plays on the heartstrings of traditional hot-rod aficionados. The 371cid blown Oldsmobile Rocket 88 engine, built in-house by Lombardi’s Ross Racing engines, features a Dyer’s 4-71 blower atop a Cragar intake with 94-series carbs. A Tremec T-5 transmission and Winter’s quick-change rear end ensure a sporty drive and spirited stop light sprints. The black leather interior was stitched by Mike Sholly. The cabin is comfortable, yet all business with a custom bench seat. The dash (out of a Pierce Arrow) houses the Stewart Warner gauges. At the ready is a Hurst shifter and Schroeder steering wheel.

For winning the Hot Rod of the Year award, Lombardi will be one of the Top 12 featured cars of the Goodguys event season. He’ll receive a custom toolbox from Snap-on and travel accommodations to the season-ending Goodguys 17th Southwest Nationals, November 14–16, at Westworld, in Scottsdale, Arizona. The top five finalists for the Goodguys 2014 Tank’s Hot Rod of the Year award included William Shores (’32 Ford), Tony Lombardi (’30 Ford), Bruce Vath (’36 Ford), Kevin Roberts (’32 Ford), and Garey Roberts (’32 Ford).

  olsbergs
Patrik Sandell leads the way at X Games in the Kobalt Tools/OMSE Ford Fiesta ST. Photo credit: OMSE
  

Olsbergs MSE Fords Fast at X Games Tight Racing in Austin for Second Round of Red Bull Global Rallycross
The second round of Red Bull Global Rallycross joined X Games in Austin, Texas, for two days of action on a tight, half-mile dirt and tarmac course built into the Circuit of the Americas. Olsbergs MSE drivers Patrik Sandell and Joni Wiman both qualified at the top of a competitive 19-car field. Sandell, in the Kobalt Tools Olsbergs MSE Ford Fiesta ST, finished at the front of every qualifying match and earned a position on the front row of the Final where he was issued a penalty that knocked him out of podium contention. Wiman, in the Red Bull/Bluebeam Olsbergs MSE Ford Fiesta ST, was unable to land a spot in the six-car Final.

In addition to the Supercars competition, a full roster of GRC Lites joined the series last weekend for the first race of the season. Red Bull/Olsbergs MSE GRC Lites driver Mitchell DeJong earned X Games gold, while teammate Kevin Eriksson scored the silver medal in his Olsbergs MSE GRC Lites car. The GRC Lites are purpose-built 310-hp rallycross racers designed and built by Olsbergs MSE and introduced to GRC in 2013 as a development series for the sport of rallycross.

The team will next appear in competition with World RX drivers Andreas Bakkerud and Reinis Nitiss at World RX of Norway in Hell, Norway, June 14–15. Olsbergs MSE's Red Bull Global Rallycross drivers are back in action for the Washington, D.C., championship stop June 21–22.

  pulstar
Al Unser Jr. returned to the winner’s circle at the Indianapolis Motor Speedway earlier this week in the Charity Indy Legends Pro-Am Race. Photo credit: Dana Garret
  

Pulstar Performance Expert Al Unser Jr. Wins Again at Indianapolis Motor Speedway
Pulstar Pulse Plugs Performance expert Al Unser Jr. returned to the winner’s circle at the Indianapolis Motor Speedway earlier this week in the Charity Indy Legends Pro-Am Race. Unser Jr. and his amateur partner Peter Klutt took the top prize on the track’s road course in the marquee event of the three-day inaugural SVRA Brickyard Vintage Racing Invitational. Unser Jr., a two-time winner of the Indianapolis 500, participated in the 45-minute race that paired former Indy 500 drivers with amateurs to race vintage, ’63–’72 Chevrolet Camaros, Chevrolet Corvettes and Ford Mustangs. Unser and Klutt, president of Legendary Motorcar Co. and a former TV show host, drove Klutt’s ’69 Corvette to the win. Unser was one of 24 Indy 500 veterans in the field that included drivers Eliseo Salazar (who finished second with Gary Moore), Willy T. Ribbs (third-place winner with Ed Sevadjian), Buddy Lazier, Scott Goodyear, Mark Dismore, Robby Unser and Lyn St. James.

Thu, 06/12/2014 - 14:53

By Della Domingo

  sdc
The SEMA Data Co-op's new product data management tools will reduce the time it takes to load and validate large files from days to hours.
  

The SEMA Data Co-op (SDC) has enhanced its product data management tools to make it easier and faster for auto accessory suppliers to process their files. The new tools, which were introduced last month, will reduce the time it takes to load and validate large files from days to hours.
 
"We are all very excited about the launch of this important feature," said Bob Castle, SDC vice president of eBusiness and I.T. "It provides much-needed capability to brands with very high SKU counts, sometimes exceeding 1 million records. Now suppliers can easily stage their large files for loading without tedious prep work, and can enjoy the very efficient automation we have built into our PIMS system."  
 
The SDC’s full-featured solution includes comprehensive data validation tools, unlimited secure storage and an easy-to-use web interface for supplier members to manage their product data. Additionally, data receivers can get exports formatted specifically to their requirements, and can manage delivery of data through a versatile scheduling tool.
 
Since launching in 2013, the SDC has grown to include more than 285 industry brands and 375 data receivers.
 
“The SDC is designed to be very simple to use,” said Castle. “Because members do not need to have any prior data management experience and there are no setup charges, joining the co-op is easy and affordable. In fact, no fees are collected until the on-boarding process is completed and data is being exported to receivers.”
 
The SEMA Data Co-op is an industry-owned and -operated project designed to bring full product data management capabilities to participating suppliers at the lowest possible cost. Features include a secure, industry-standards-based centralized data repository, extensive on-boarding tools, expert live training and technical assistance, and unlimited standard or fully customized data exports.

To learn more about the program, visit www.SemaDataCoop.org or contact Jim Graven at JimG@SemaDataCoop.org or call 888-958-6698, ext. 4.

Thu, 06/12/2014 - 14:53

By Della Domingo

  sdc
The SEMA Data Co-op's new product data management tools will reduce the time it takes to load and validate large files from days to hours.
  

The SEMA Data Co-op (SDC) has enhanced its product data management tools to make it easier and faster for auto accessory suppliers to process their files. The new tools, which were introduced last month, will reduce the time it takes to load and validate large files from days to hours.
 
"We are all very excited about the launch of this important feature," said Bob Castle, SDC vice president of eBusiness and I.T. "It provides much-needed capability to brands with very high SKU counts, sometimes exceeding 1 million records. Now suppliers can easily stage their large files for loading without tedious prep work, and can enjoy the very efficient automation we have built into our PIMS system."  
 
The SDC’s full-featured solution includes comprehensive data validation tools, unlimited secure storage and an easy-to-use web interface for supplier members to manage their product data. Additionally, data receivers can get exports formatted specifically to their requirements, and can manage delivery of data through a versatile scheduling tool.
 
Since launching in 2013, the SDC has grown to include more than 285 industry brands and 375 data receivers.
 
“The SDC is designed to be very simple to use,” said Castle. “Because members do not need to have any prior data management experience and there are no setup charges, joining the co-op is easy and affordable. In fact, no fees are collected until the on-boarding process is completed and data is being exported to receivers.”
 
The SEMA Data Co-op is an industry-owned and -operated project designed to bring full product data management capabilities to participating suppliers at the lowest possible cost. Features include a secure, industry-standards-based centralized data repository, extensive on-boarding tools, expert live training and technical assistance, and unlimited standard or fully customized data exports.

To learn more about the program, visit www.SemaDataCoop.org or contact Jim Graven at JimG@SemaDataCoop.org or call 888-958-6698, ext. 4.

Thu, 06/12/2014 - 14:24

Truck Accessories Group Names Jim Blayne Director of Fleet Sales

 Jim Blayne, Truck Accessories Group
Jim Blayne was named director of fleet sales for the Truck Accessories Group.
  

Truck Accessories Group (TAG) has added Jim Blayne to its staff as director of fleet sales for the company’s Commercial Division. Blayne will deliver the vision and the experience to help TAG’s commercial and fleet customers meet their exacting budget and transportation needs. Blayne joins TAG with more than 22 years of industry experience, including senior management positions at A.R.E. Accessories in Ohio. He will establish the company’s Commercial Division’s overall strategy and oversee all aspects of its sales efforts.

“Jim’s addition to the Commercial Division team, along with his unique experience, impeccable integrity and drive, will help the company establish important relationships with new and existing commercial customers throughout North America,” said Kevin Page, vice president of sales and marketing for LEER. “We now have the Commercial team in place to deliver exceptional value and service to our fleet customers.”

procomp
The Federal Motor Vehicle Safety Standard (FMVSS 126) test was performed to show that the installation of a Pro Comp 6-in. suspension system, Pro Comp wheels and 35-in. Pro Comp tires on a ’14 Ram 1500 would not compromise the performance and effectiveness of the vehicle’s Electronic Stability Control system.


  

Pro Comp Passes Electronic Stability Control Test With ’14 Ram 1500 6-in. Suspension System

Pro Comp has announced that it has tested and successfully passed the Federal Motor Vehicle Safety Standard (FMVSS 126) test. This highly specialized test was performed to show that the installation of a Pro Comp 6-in. suspension system, Pro Comp wheels and 35-in. Pro Comp tires on a ’14 Ram 1500 would not compromise the performance and effectiveness of the vehicle’s Electronic Stability Control (ESC) system.

The Ram was fitted with an array of sensors and test equipment to monitor all aspects of the vehicle's movement and dynamics, including a robotically operated steering wheel to assure precise and accurate tests. On the closed test course, the Pro Comp-equipped vehicle was accelerated to 50 mph, at which point the test operator initiated the test and let the computer take over. The robotically controlled wheel spins abruptly; both left and right, up to 300 degrees in less than half a second and then returns back to dead center, causing the truck to change direction and begin to slide. This event caused the Ram’s ESC system to activate and regain control. When the data was analyzed, it clearly showed that the Pro Comp products did not interfere with the performance of the ESC systems.

Motovicity Adds PLX Products to Lineup

Motovicity Distribution announced the addition of PLX Devices to its line of performance aftermarket products. PLX is an innovative line of performance electronics products and custom apps geared toward performance enthusiasts and retailers. The PLX products that Motovicity highlighted as key include: the DM-6 Wideband AFR (UEGO) Combo, which includes the DM-6 touch screen controlled MultiGauge; a Bosch LSU4.2 wideband O2 sensor; and the PLX SM-AFR wideband controller module.

“We’re pleased to add PLX to our lineup of performance brands,” said Motovicity Sales Manager Ryan Balicki. “This creates new opportunities for our customers to meet the growing market demand for reliable tuning accessories.”

McKeel Hagerty Honored by LeMay

 Hagerty, LeMay
McKeel Hagerty, president and CEO of Hagerty, received the “Nicola Bulgari Award” from LeMay – America’s Car Museum during its second Wheels & Heels Annual Gala.
  

LeMay – America’s Car Museum (ACM) presented its “Nicola Bulgari Award” to McKeel Hagerty, president and CEO of Hagerty, which offers insurance and valuation tools for classic vehicles. The ceremony was conducted Saturday evening at the Wheels & Heels Annual Gala, celebrating the second-year anniversary of the Tacoma, Washington-based museum. Named after jewelry magnate and classic car collector Nicola Bulgari, the award is presented annually to individuals who make outstanding contributions to preserve America’s automotive heritage through education, car restoration and collecting classic cars.

Hagerty took over the family business in 1995 and has grown the company from 30 employees to more than 500. He created the Collectors Foundation, which has awarded $2.75 million in scholarships and grants to prepare young adults for careers in automotive preservation and restoration. It was renamed the Hagerty Education Program after partnering with America’s Car Museum in January 2014, and Hagerty has committed another $1.75 million to support collector vehicle education.

CRP Recognized for Electronic Data Excellence

CRP Automotive was presented with the Best-in-Class NCMA President’s Award for Electronic Data Excellence for 2013–2014, at the most recent National Catalog Managers Association Knowledge Exchange in Chandler, Arizona. CRP Automotive was nominated for this prestigious award by Epicor, a leading retail software manufacturer.

The award announcement was made by Daniel Schildge, president of CRP Industries, who noted, “It’s an honor to be recognized by both Epicor and the NCMA for our cataloging efforts. This award validates the process improvements that we have enacted within our cataloging activities and is a tribute to the dedication and hard work of our entire catalog team.”

Advanstar Promotes Pete Meier to Director of Training

Pete Meier, Advanstar
Pete Meier was promoted to director of training for the Advanstar Automotive Group.
 
  

The Advanstar Automotive Group has promoted Pete Meier to director of training. Meier joined Advanstar in September 2010 as technical editor after spending more than 35 years as an automotive technician. In his new role, Meier will oversee the training program for Automechanika Chicago in 2015 and the development of other training initiatives within Advanstar Automotive Group, including webinars and video training projects. He will continue in his role as Advanstar Automotive Group technical editor.

During his time at Advanstar Automotive Group, Meier helped launch the “The Trainer” video series and the Motor Age YouTube channel so more technicians would have access to technical training. In addition to creating monthly videos to address a variety of technical topics, Meier helped establish a partnership with Technicians Service Training (TST) to host live, interactive webinars for Motor Age readers at no charge.

CURT Manufacturing Acquires Aries Automotive

 Aries Automotive, CURT Manufacturing
CURT Manufacturing has acquired Aries Automotive, a manufacturer of tubular-style truck accessories and 3D floor- and cargo-liner interior accessories.
  

CURT Manufacturing, a leading manufacturer and marketer of top-quality towing products, has announced the acquisition of Aries Automotive, manufacturer of tubular-style truck accessories and 3D floor- and cargo-liner interior accessories. All contact information for Aries, including phone numbers and email addresses, will remain the same.

Greg Hooks, CEO of CURT Manufacturing stated, “We are very excited for the opportunity to add high-quality truck and interior accessories to our portfolio of products.” Jeff Perez, President of Aries added, “We are all pleased with the acquisition of Aries Automotive and we are very much looking forward to working with the CURT team.” Jeff Perez and his team will continue to be the contacts for Aries Automotive.

Dust and Son Adds RKI Product Line

Dust and Son, RKI
Jeff Dust and Kevin Dust, of Dust and Son, celebrate their new relationship with Al Creekmore and other employees of RKI Inc.
 
  

Dust and Son, an automotive parts and power equipment retailer and wholesaler, announced that the company is now a distributor for the RKI Inc. product line. RKI is a manufacturer of specialty truck boxes, service bodies, wenches, cranes, and aerodynamic window grilles. Dust and Son is celebrating its 85th year in business with Illinois retail locations in Effingham, Charleston, Urbana, Marion, Decatur, Grayville, Salem, and Sullivan.  More information about Dust and Son and the RKI line can be found at www.dustandson.com.

Silver Sport Transmissions Acquires Keisler Engineering

Silver Sport Transmissions (SST) in Rockford, Tennessee, has acquired the assets and intellectual property of Keisler Engineering, which filed for bankruptcy in early 2014. Silver Sport will continue to market the Tremec TKO 500/600 and T56 Magnum transmission using the PerfectFit technology providing restoration enthusiasts a high-quality product with the best fit and performance possible. SST takes customer service to a new level with no down payment requirement and quick shipping from its large inventory.

Landon List Joins ReadyLIFT Suspension Inc. as New Western Regional Sales Manager

ReadyLIFT Suspension Inc. has announced that Landon List has joined the company to further strengthen and grow the already expanding sales efforts of ReadyLIFT's street and off-road product lines. List had previously spent 2.5 years with Transamerican Wholesale/4 Wheel Parts and before that, 2.5 years with VIAIR. While at Transamerican/4 Wheel Parts, he was responsible for merchandising suspension lines, and was a key manager in building relationships with vendors. As an off-road enthusiast, List has been involved with UTV racing and Jeepspeed racing, and enjoys trail riding in his Jeep. He will help to build the connection between ReadyLIFT and off-road customers who are looking for better-designed and off-road-ready suspension products.  

Have some company news you would like to share? Let us know and the news may appear in an upcoming issue of SEMA eNews. Send your items for consideration to editors@sema.org

Thu, 06/12/2014 - 14:16

By SEMA Editors

  pri
About 1,200 of the biggest brand names in hardcore racing components from across the United States and in 72 countries will display the latest advances in racing products and race engineering at the 2014 PRI Show, which will be held December 11–13, at the Indiana Convention Center in Indianapolis.
  

The Performance Racing Industry (PRI) has announced that the 2014 PRI Show floorplan is now available online, enabling attendees to identify the exhibiting company in every booth.

About 1,200 of the biggest brand names in hardcore racing components from across the United States and in 72 countries will display the latest advances in racing products and race engineering at the 2014 PRI Show, which will be held December 11–13, at the Indiana Convention Center in Indianapolis.

More than 48,000 pre-qualified buyers for tens of thousands of racing retail stores, warehouse distribution centers, professional race engine builders and race car production companies are expected to attend. In the United States alone, there are more than 400,000 racers, the vast majority of whom are at the grassroots level, purchasing products from their local race store or race engine builder.

Thousands of professional race teams, from NASCAR Cup teams to NHRA Top Fuel, from Japan to the United Kingdom, send buyers to ensure they are current with today’s race technology.

Suppliers of components, equipment or engineering services who are active in the $13.5 billion racing industry can capture their share of this market by exhibiting. Register now!

Important Links:

Thu, 06/12/2014 - 14:16

By SEMA Editors

  pri
About 1,200 of the biggest brand names in hardcore racing components from across the United States and in 72 countries will display the latest advances in racing products and race engineering at the 2014 PRI Show, which will be held December 11–13, at the Indiana Convention Center in Indianapolis.
  

The Performance Racing Industry (PRI) has announced that the 2014 PRI Show floorplan is now available online, enabling attendees to identify the exhibiting company in every booth.

About 1,200 of the biggest brand names in hardcore racing components from across the United States and in 72 countries will display the latest advances in racing products and race engineering at the 2014 PRI Show, which will be held December 11–13, at the Indiana Convention Center in Indianapolis.

More than 48,000 pre-qualified buyers for tens of thousands of racing retail stores, warehouse distribution centers, professional race engine builders and race car production companies are expected to attend. In the United States alone, there are more than 400,000 racers, the vast majority of whom are at the grassroots level, purchasing products from their local race store or race engine builder.

Thousands of professional race teams, from NASCAR Cup teams to NHRA Top Fuel, from Japan to the United Kingdom, send buyers to ensure they are current with today’s race technology.

Suppliers of components, equipment or engineering services who are active in the $13.5 billion racing industry can capture their share of this market by exhibiting. Register now!

Important Links: