Thu, 03/27/2008 - 00:00

Dates and locations for several upcoming SEMA-sponsored shows and activities have been announced. Details are:

>> SEMA National Education Conference, April 10–11, 2008 Nashville
>> SAE 2008 World Congress, April 14–17, 2008, Detroit
>> SEMA Washington Rally, May 14–15, 2008, Washington, D.C.
>> PAACE Automechanika Mexico, July, 9–11, 2008, Mexico City
>> 2008 Aftermarket eForum, July 14–16, 2008, Hyatt Regency O'Hare, Chicago
>> SEMA Show 2008, November 4–7, 2008, Las Vegas  

For association-related travel, contact Manya Petropaki (manya.p@travelstoreusa.com) at Travel Store USA, 949/930-9268.

Looking for Some Extra Publicity for Your Industry Event?
Publicize your events through the SEMA Online Calendar of Events located at www.sema.org/calendar. The calendar is stocked with information on events taking place throughout the year, broken down by month. Examples of events featured in the calendar include consumer shows and club events, educational and training workshops, conventions and trade shows, races and more.

To submit your event details for the calendar, e-mail company name and the date(s), location and name of the event to Shirley Presecan at shirleyp@sema.org.

Thu, 03/27/2008 - 00:00


A four-cylinder turbocharged Camaro?

If fuel prices continue to rise, it could happen, said GM Vice Chairman Bob Lutz at last week’s New York Auto Show. According to Automotive News, Lutz said the drivetrain under consideration is the same engine found in the Pontiac Solstice and Saturn Sky, a 2.0L turbocharged, direct-injected Ecotec four rated at 260 hp.

So far GM has confirmed V8 and V6 versions of the Camaro, the latter using the same direct-injected 3.6L four-cam mill found in the Cadillac CTS. The V8, according to Automotive News, is likely to be a 6.0L offering about 400 hp. Lutz said that GM has dropped plans to offer an entry-level Camaro powered by a lesser V6, perhaps opening the door for a different entry-level pony powered by the four-banger turbo.

To its enthusiast base, a Camaro with anything less than a six-cylinder underhood is an aberration. A quick scan of the enthusiast forums at Camaro5.com, for example, reveals the divide among enthusiasts.

"Four-banger Camaros are a bad idea," writes one member named Jimbo. "Fans of the cars won't stand for it. It is just a dumb idea because doing so will create a stigma upon all Camaros." Another member likens the idea to a pizza made with Heinz ketchup rather than tomato sauce.

The board moderator, however, urges perspective, arguing that "the inclusion of an I4 does not diminish the car's muscle/pony/sports car status. What other sports car could appeal to those who want a four?"

(To read the whole lengthy, amusing exchange, check out www.camaro5.com/forums/showthread.php?t=3269).

Scott Oldham, musclecar enthusiast and Editor-in-Chief of InsideLine.com, doesn’t think the turbo four is bad idea, but questions whether it can haul the Camaro’s heft.

“With 260 hp, that turbo Ecotec is no slouch,” he says. “But that Camaro is going to weigh about 4,000 lbs., and that little four-banger just doesn’t have the bottom-end torque to get such a heavy car off the line. I’ll take mine with the LS3 V-8.”

And as the Camaro is one of the aftermarket’s most anticipated arrivals, a turbo four opens the door even wider, particularly for specialty-equipment companies specializing in the Solstice/Sky or forced induction.

“I would be absolutely elated to see this come to pass,” says Bill Hahn, Jr., founder and president of Hahn Racecraft in Yorkville, Illinois. Hahn’s company, in business for 20 years, offers a spectrum of parts including turbo, intercooler and tuning/fuel system upgrades for GM engines, particularly the 2.0L and 2.4L Ecotec.

“A four-cylinder turbo Camaro? I say “why not?” Hahn says, adding that from over 20 years of watching and working with GM, he wouldn’t be surprised to see a turbo version of the 2.4L Ecotec. 

“The difference between a 2.0L and 2.4L is analogous to that between a 350 and a 427. It’s significant. You’re talking 20 percent more displacement, the bulk of it coming from more stroke, i.e. more torque. That wouldn’t surprise me.”

“I could see a turbo V-6 also,” he adds. “Nothing wrong with that. Take a page from GM’s past there, the [Buick] Grand National. Definitely as powerful as most V-8s.”

Hahn doesn’t see any reason why a turbo-4 Camaro wouldn’t sell.

“Is a turbo 4-cylinder today’s six-cylinder? You betcha. That is definitely an apt comparison. Today’s turbo four-cylinder will typically out-torque and out-horsepower any six-cylinder from the days of yore.”

“And turbocharging does more than just give you the ability to have a small motor when you need it and a lot of power when you want it,” he adds. “It can also increase efficiencies at cruising speeds.”

Dave Johnson is president of Dejon Powerhouse, an Ohio company that makes turbo kits for the Solstice GXP/Sky platforms.

“We’d definitely be on the bandwagon,” if GM introduces the turbo four Camaro, he says.

Johnson says the Ecotec’s factory turbo closely resembles those found on the first-generation Eagle Talon and Mitsubishi Eclipse, among the first of the legendary high-performance sport compacts. By swapping in a Mitsubishi 16G turbo capable of moving more air, he’s unlocked about 375 engine horsepower.

“This engine we’ve found capable of handling significantly high boost pressures because of the direct injection,” he says. “Normally we’d see knock starting at around 20, 21 psi on 93 octane. I’ve been running up at 23, 24, 25 and not seen knock. It’s a very well-designed engine for boost applications.”

Does Johnson think buyers will go for a Camaro four-banger?

“For a lot of guys, the V8 is the only way they’d ever go. But the younger people are used to turbos and they see the Camaro as a desirable car. You might see younger people picking it up and going with the turbo version."

Source: "Lutz: GM Mulls 4-Cylinder Engine for New Camaro," Richard Truett, Automotive News, 3/19/08

Thu, 03/27/2008 - 00:00

Perhaps indicative of recent TV shows that highlight and glamorize custom car and motorcycle building, more custom builders/fabricators attended the SEMA Show in 2007 than in the two years prior. A majority of the 49 other business classifications also demonstrated significant growth.

Registration data from the 2007 Show revealed a 16% increase in attendees who classified themselves as custom builders and fabricators compared to the 2005 Show. They accounted for the fourth-largest segment of the industry in attendance at the Show, and the second fastest-growing in actual headcount (704 additional custom builders and fabricators), trailed only by the rapid rise in attendees from the collision repair business (1,849 additional attendees compared to 2005, a 90% increase).

The accessories and installation category remained the largest group in attendance for the third consecutive year, followed by auto parts retailers and car dealers. The largest percentage of attendee growth among business segments, however, includes car washes and detailers (238%), and program group buyers and electrical/mechanical remanufacturers (108% each).

“With such a diverse group of exhibitors and attendees, the SEMA Show is really a reflection of what's going on in the accessories industry,” said Peter MacGillivray, SEMA vice president of communications and events. “Trends gleaned from the show can represent business opportunities for our members looking to expand their businesses.”

For information on the upcoming 2008 SEMA Show, go to www.SEMAShow.com.

Thu, 03/27/2008 - 00:00


Hot rodding has always been about passion. 

It all goes back to the earliest days of the industry when passionate young men met on the dry lake beds to see who could make their car go the fastest. Just talk to any of the icons of hot rodding and you will hear the same story. They were driven to find ways to make their cars go faster, they were hugely competitive and they enjoyed being in the company of other hot rodders. The relationships were so strong that they thought nothing of helping each other out. Push a fellow competitor’s car, loan another hot rodder tools, give another guy parts—it was all part of what the hobby was about.

Here we are, 70 years later, and hot rodding may be more sophisticated, but at its foundation, it’s still basically the same. Granted, speed isn’t quite the strong factor it was, but as you look at hot rods today, they invariably have the right equipment to go fast, even if they never do.

People gather here and there across the country to show off their cars, see what others have done with theirs and build relationships. These are people who will invest thousands of hours and tons of money to make their favorite car look just so.

The people involved are still passionate about their cars, so much so that in 2007 they spent $1.06 billion on products for them. It's a passion that has caused retail sales to increase more than 66% in the last 10 years.



And what are these hot rodders buying? A survey conducted by SEMA involving thousands of enthusiasts asked that very question. The table below shows what hot rodders said.

So as you stop and look around at the world of hot rods, remember it’s all about cars, passion and relationships. For more industry insight and research, please visit www.sema.org/research.


Source: SEMA Research & Information Center

Thu, 03/27/2008 - 00:00

New-vehicle sales in 2008 are expected to reach their lowest levels since 1994, dropping to 14.95 million cars and light trucks, according to J.D. Power and Associates. New-vehicle sales for 2008 were originally forecast at 15.7 million units.

"While the automotive industry's slow performance in January and February certainly contributes to the anticipated drop in new-vehicle sales, declining consumer confidence and spending, as well as turbulent financial and economic market conditions, are primarily driving the decline," said Jeff Schuster, executive director of automotive forecasting for J.D. Power and Associates.

Additionally, weaker retail and fleet markets contributed to the overall reassessment of total new-vehicle sales for 2008. Retail sales were initially forecast at 12.6 million units, but are now expected to decline to 12.3 million, down from 12.8 million in 2007. General economic conditions, coupled with less widespread incentives, are driving the retail decline. Fleet sales have already experienced a weaker-than-expected start in 2008, but a further decline is anticipated as daily rental sales are not projected to return to pre-2007 levels.

"The downturn in retail sales, coupled with declines across the fleet market, also contributes to the overall reassessment of new-vehicle sales for 2008," said Bob Schnorbus, chief economist at J.D. Power and Associates. "Unfortunately, the current economic environment is fraught with uncertainty and risk, with the financial crisis, worsening oil prices, and weak housing and stock markets steadily impacting other sectors of the economy. As such, our revised forecast is better positioned to reflect the challenges automakers will face in the months ahead."

In the first quarter of 2008, sales are expected to average 15.2 million units, with sales in the second quarter falling to approximately 14.8 million units before beginning a slow rebound during the second half of the year and into 2009.

Source: J.D. Power and Associates March 18 /PRNewswire

Thu, 03/27/2008 - 00:00

Filler for eNews

Thu, 03/27/2008 - 00:00

Filler for eNews

Thu, 03/20/2008 - 00:00

Registration for the 2008 SEMA Show, scheduled November 4-7, 2008 in Las Vegas, is open!

Phase one gives priority to qualified non-exhibiting attendees who have attended the SEMA Show during the past three years. Individuals in this group will receive an e-mail that includes a personal alumni number and link that makes it possible to register quickly, without having to re-submit proof of industry affiliation.

“The SEMA Show is a business-to-business trade show that brings buyers and manufacturers together,” said Peter MacGillivray, SEMA vice president of events and communications. “Those who have attended previous shows and contributed to the event’s success are being given priority status and can now register for the 2008 event without any hassles or delays.”

Since the SEMA Show debuted in 1967, the show has served as a trading post for what’s new in the automotive specialty-equipment market. Last year, the show attracted more than 2,000 exhibitors and included 1,700 entries into its New Products Showcase. Dozens of educational and technical seminars, networking events and special presentations round out the weeklong show.

Qualified alumni (those who attended the 2005, 2006 or 2007 SEMA Show) who did not receive the e-mail with their personal alumni link may be able to request their alumni number by clicking here or calling 866/229-3687 or 301/694-5243. Exhibitor registration opens in June. Details are available and continually updated at www.semashow.com.

Act now and save, as on-site registration has increased to $60 this year. Click on the "Travel & Lodging" link from the left menu at www.semashow.com to visit the Show's official housing site.

Thu, 03/20/2008 - 00:00

The Exhibit Space Rental Agreement for the 2008 SEMA Show is now available online. Simply go to www.SEMAShow.com/buyabooth.

The 2008 SEMA Show will be filled with the buyers you want to see, the media connections you need to make and the networking opportunities that can’t be found anywhere else. Changes that are NEW THIS YEAR are: 

  • SEMA has removed the limit on exhibit space. Our effort to make space available to the entire industry has been successful: last year we accommodated over 500 all-new exhibitors at the SEMA Show. This year we are eliminating the space cap to allow all exhibitors the opportunity to purchase additional space. We do reserve the right to reestablish a space cap in the event that demand far exceeds our ability to supply space.

  • There is a new and simple 50/50 payment process. Your first payment (50% deposit) is due by April 4, 2008, and the balance is due by July 11, 2008.

  • The Car Care & Accessories section has been merged with Restyling & Accessories Center and is now called the “Restyling and Car Care Accessories” section.

If you have any questions about your exhibit space, floorplan, seniority or section, call customer service at 702/450-7662, ext. 120. 

Thu, 03/20/2008 - 00:00

Legislation (S.B. 1549) has been introduced in the California State Senate to repeal the state’s current emissions-test exemption for pre-'76 vehicles registered by new owners in the San Joaquin Valley Unified Air Pollution Control District. The District includes eight counties in California’s Central Valley: San Joaquin, Stanislaus, Merced, Madera, Fresno, Kings, Tulare and the valley portion of Kern.

Under the bill, after January 1, 2009, new owners seeking to register a pre-'76 vehicle in these eight counties would be subject to emissions tests for the life of the vehicle. S.B. 1549 is scheduled to be considered by the California Senate Transportation and Housing Committee on April 1, 2008. 

For more information, click here. 

For details, contact Steve McDonald at stevem@sema.org.