Legislation that threatened to increase annual registration fees by $25 for all motor vehicles was reduced to $21 and sent to the Idaho governor for his signature and enactment into law.

By SEMA Washington, D.C., Staff

Under an agreement reached by the House and Senate, legislation that threatened to increase annual registration fees by $25 for all motor vehicles was reduced to $21 and sent to the governor for his signature and enactment into law. Originally passed by the House as a $15 increase, the bill was amended and passed by the Senate as a $25 increase. Registration fees for vehicles of all types and ages would be raised by $21.

The bill makes no special exception for hobby cars such as kits, classics, old timers, reconstructed, replica, specially constructed and street rods that constitute a small portion of the vehicle fleet, are infrequently operated and deserving of lower registration fees.

For more information, visit the SEMA Action Network (SAN) website. For details, contact Steve McDonald at stevem@sema.org.

By SEMA Washington, D.C., Staff

Legislation in the California legislature to require manufacturers of designated consumer products, including automotive products, to include all ingredients on the product label and online on the manufacturers’ website will be considered by the Assembly Business and Professions Committee, Tuesday, April 21, 2015. 

Currently, ingredients in automotive products are not required to be listed on product labels. After July 1, 2016, this bill would make it a crime to manufacture, distribute and sell at retail or wholesale automotive products that do not have a label listing all ingredients and a manufacturer webpage address at which product ingredient information can also be found. The measure would apply to products for maintaining the appearance of a vehicle, including products for washing, waxing, polishing, cleaning or treating the exterior or interior surfaces of a vehicle, but excluding automotive paint and paint repair products. 

For more information, visit the SEMA Action Network website. For details, contact Steve McDonald at stevem@sema.org.

By SEMA Washington, D.C., Staff

Legislation in the California legislature to require manufacturers of designated consumer products, including automotive products, to include all ingredients on the product label and online on the manufacturers’ website will be considered by the Assembly Business and Professions Committee, Tuesday, April 21, 2015. 

Currently, ingredients in automotive products are not required to be listed on product labels. After July 1, 2016, this bill would make it a crime to manufacture, distribute and sell at retail or wholesale automotive products that do not have a label listing all ingredients and a manufacturer webpage address at which product ingredient information can also be found. The measure would apply to products for maintaining the appearance of a vehicle, including products for washing, waxing, polishing, cleaning or treating the exterior or interior surfaces of a vehicle, but excluding automotive paint and paint repair products. 

For more information, visit the SEMA Action Network website. For details, contact Steve McDonald at stevem@sema.org.

By SEMA Washington, D.C., Staff

Legislation in the California legislature to require manufacturers of designated consumer products, including automotive products, to include all ingredients on the product label and online on the manufacturers’ website will be considered by the Assembly Business and Professions Committee, Tuesday, April 21, 2015. 

Currently, ingredients in automotive products are not required to be listed on product labels. After July 1, 2016, this bill would make it a crime to manufacture, distribute and sell at retail or wholesale automotive products that do not have a label listing all ingredients and a manufacturer webpage address at which product ingredient information can also be found. The measure would apply to products for maintaining the appearance of a vehicle, including products for washing, waxing, polishing, cleaning or treating the exterior or interior surfaces of a vehicle, but excluding automotive paint and paint repair products. 

For more information, visit the SEMA Action Network website. For details, contact Steve McDonald at stevem@sema.org.

By SEMA Washington, D.C., Staff

Legislation in the California legislature to require manufacturers of designated consumer products, including automotive products, to include all ingredients on the product label and online on the manufacturers’ website will be considered by the Assembly Business and Professions Committee, Tuesday, April 21, 2015. 

Currently, ingredients in automotive products are not required to be listed on product labels. After July 1, 2016, this bill would make it a crime to manufacture, distribute and sell at retail or wholesale automotive products that do not have a label listing all ingredients and a manufacturer webpage address at which product ingredient information can also be found. The measure would apply to products for maintaining the appearance of a vehicle, including products for washing, waxing, polishing, cleaning or treating the exterior or interior surfaces of a vehicle, but excluding automotive paint and paint repair products. 

For more information, visit the SEMA Action Network website. For details, contact Steve McDonald at stevem@sema.org.

By SEMA Washington, D.C., Staff

A bill to amend the California law governing “Made in U.S.A.” labeling was approved by an assembly committee and is now on the floor of the assembly for a vote by all members. Under current law, the standard in California for designating products as “Made in U.S.A.” is different and more onerous than the standard established by the U.S. Federal Trade Commission (FTC). 

The FTC allows manufacturers to display the “Made in U.S.A.” designation on products that are “all or virtually all” made in the United States. California has put in place a different standard requiring the product and all its subcomponents be entirely or substantially produced in the U.S. in order to be labeled as “Made in U.S.A.” This bill would resolve this discrepancy. 

For more information, visit the SEMA Action Network (SAN) website. For details, contact Steve McDonald at stevem@sema.org.

By SEMA Washington, D.C., Staff

A bill to amend the California law governing “Made in U.S.A.” labeling was approved by an assembly committee and is now on the floor of the assembly for a vote by all members. Under current law, the standard in California for designating products as “Made in U.S.A.” is different and more onerous than the standard established by the U.S. Federal Trade Commission (FTC). 

The FTC allows manufacturers to display the “Made in U.S.A.” designation on products that are “all or virtually all” made in the United States. California has put in place a different standard requiring the product and all its subcomponents be entirely or substantially produced in the U.S. in order to be labeled as “Made in U.S.A.” This bill would resolve this discrepancy. 

For more information, visit the SEMA Action Network (SAN) website. For details, contact Steve McDonald at stevem@sema.org.

By SEMA Washington, D.C., Staff

A bill to amend the California law governing “Made in U.S.A.” labeling was approved by an assembly committee and is now on the floor of the assembly for a vote by all members. Under current law, the standard in California for designating products as “Made in U.S.A.” is different and more onerous than the standard established by the U.S. Federal Trade Commission (FTC). 

The FTC allows manufacturers to display the “Made in U.S.A.” designation on products that are “all or virtually all” made in the United States. California has put in place a different standard requiring the product and all its subcomponents be entirely or substantially produced in the U.S. in order to be labeled as “Made in U.S.A.” This bill would resolve this discrepancy. 

For more information, visit the SEMA Action Network (SAN) website. For details, contact Steve McDonald at stevem@sema.org.

By SEMA Washington, D.C., Staff

A bill to amend the California law governing “Made in U.S.A.” labeling was approved by an assembly committee and is now on the floor of the assembly for a vote by all members. Under current law, the standard in California for designating products as “Made in U.S.A.” is different and more onerous than the standard established by the U.S. Federal Trade Commission (FTC). 

The FTC allows manufacturers to display the “Made in U.S.A.” designation on products that are “all or virtually all” made in the United States. California has put in place a different standard requiring the product and all its subcomponents be entirely or substantially produced in the U.S. in order to be labeled as “Made in U.S.A.” This bill would resolve this discrepancy. 

For more information, visit the SEMA Action Network (SAN) website. For details, contact Steve McDonald at stevem@sema.org.

By SEMA Washington, D.C., Staff

Valuable government resources to help your business prosper are now at your fingertips. SEMA has assembled links to dozens of federal and state government websites that address a wide variety of small-businesses issues. Topics include business formation, taxes, antitrust enforcement, warranties, employment issues, government procurement, environment and small-business financing mechanisms. The SEMA Small Business Issues webpage is listed under the "Government Affairs" section on SEMA's homepage. 

For details, contact Stuart Gosswein at stuartg@sema.org.