Thu, 11/01/2018 - 16:05

By SEMA Editors

GarrettGarrett Advancing Motion unveiled a Formula DRFIT-spec ’99 Nissan Silvia S15 built by Enjuku Racing for YouTube personality Adam LZ at the 2018 SEMA Show in Las Vegas.

Garrett Advancing Motion unveiled a Formula DRFIT-spec ’99 Nissan Silvia S15 built by Enjuku Racing for YouTube personality Adam LZ at the 2018 SEMA Show in Las Vegas.

In the hands of Enjuku Racing, the once-neglected project car received a complete transformation, resulting in a Formula DRIFT competition-level car. To begin the transformation, the chassis was completely stitch welded and received a fully custom TIG-welded cage, along with a tubed front and rear end. Enhancing the vehicle’s exterior esthetic and aerodynamics is a Vertex Edge wide-body kit giving the car an additional 30mm in width overall. Completing the car’s exterior transformation is a Black Rose wrap.

LZ’s S15 is powered by a Toyota 2JZ-GTE stroked to 3.4L utilizing a Brian Crower stroker kit, with a custom Sleeper Designs billet aluminum intake manifold paired with an RMR throttle body, along with a DOCRace Turbo Manifold, connected to a Garrett GTX3584RS turbocharger. The vehicle is outfitted with a custom ER Spec 4-in. oval exhaust from the turbo back. Pumping E85 to the engine are two Deatschwerks DW300 fuel pumps along with Deatschwerks 1200cc injectors. The engine is managed by an ECUMASTER EMU Black and tuned by RS-Enthalpy in Tampa, Florida, and makes 915hp and 835 lb.-ft. of torque at the wheels.

Delivering the power of this engine to the tires is a Samsonas six-speed sequential transmission, coupled with a Winters Performance quick-change rear end. Keeping the S15 planted to the ground is a set of BC Racing BR Series 2-way coilovers, paired with Wisefab front-lock and rear suspension kits to provide tunability and steering angle at lock. To complete the car’s overall stance is a set of 18-in. SSR SP3s with a width of 9.5 in. in the front and 10.5 in. in the rear.

Thu, 11/01/2018 - 16:05

By SEMA Editors

GarrettGarrett Advancing Motion unveiled a Formula DRFIT-spec ’99 Nissan Silvia S15 built by Enjuku Racing for YouTube personality Adam LZ at the 2018 SEMA Show in Las Vegas.

Garrett Advancing Motion unveiled a Formula DRFIT-spec ’99 Nissan Silvia S15 built by Enjuku Racing for YouTube personality Adam LZ at the 2018 SEMA Show in Las Vegas.

In the hands of Enjuku Racing, the once-neglected project car received a complete transformation, resulting in a Formula DRIFT competition-level car. To begin the transformation, the chassis was completely stitch welded and received a fully custom TIG-welded cage, along with a tubed front and rear end. Enhancing the vehicle’s exterior esthetic and aerodynamics is a Vertex Edge wide-body kit giving the car an additional 30mm in width overall. Completing the car’s exterior transformation is a Black Rose wrap.

LZ’s S15 is powered by a Toyota 2JZ-GTE stroked to 3.4L utilizing a Brian Crower stroker kit, with a custom Sleeper Designs billet aluminum intake manifold paired with an RMR throttle body, along with a DOCRace Turbo Manifold, connected to a Garrett GTX3584RS turbocharger. The vehicle is outfitted with a custom ER Spec 4-in. oval exhaust from the turbo back. Pumping E85 to the engine are two Deatschwerks DW300 fuel pumps along with Deatschwerks 1200cc injectors. The engine is managed by an ECUMASTER EMU Black and tuned by RS-Enthalpy in Tampa, Florida, and makes 915hp and 835 lb.-ft. of torque at the wheels.

Delivering the power of this engine to the tires is a Samsonas six-speed sequential transmission, coupled with a Winters Performance quick-change rear end. Keeping the S15 planted to the ground is a set of BC Racing BR Series 2-way coilovers, paired with Wisefab front-lock and rear suspension kits to provide tunability and steering angle at lock. To complete the car’s overall stance is a set of 18-in. SSR SP3s with a width of 9.5 in. in the front and 10.5 in. in the rear.

Thu, 11/01/2018 - 15:49

By SEMA Editors

RingbrothersJim and Mike Ring unveiled a ’71 Chevrolet K-5 Blazer known as “Seaker”—their first custom SUV. 

Ringbrothers returned to the SEMA Show this year with a ’71 Chevrolet K-5 Blazer known as “Seaker”—the first custom SUV by Jim and Mike Ring.

“Seaker” takes the K5 platform and adds modern performance and amenities with a show-quality finish. The custom SUV is powered by a GM LS3 crate engine with a Holley Fuel System producing 430 hp. The GM powerplant is connected to a Bowler Performance 4L60E automatic transmission, while a custom Flowmaster exhaust provides a healthy growl. An AFCO Radiator with Prestone anti-freeze provides cooling for the big engine. Suspension components are provided by RideTech, while the running boards, firewall, air box, engine covers, fan shroud, floors and side panels are all designed and fabricated by Ringbrothers.

The Blazer features a modern leather interior wrapped in laser-straight sheet metal with the help of 3M refinishing tools. Each panel was then coated in several layers of a custom BASF Glasurit color known as “Brazilian Smoke.” It also has a 1-in. body lift and larger wheel wells to make room for custom 17-in. Circle Racing wheels wrapped in BF Goodrich All-Terrain tires. The interior upholstery is by Upholstery Unlimited, with A/C provided by Vintage Air.

Thu, 11/01/2018 - 15:49

By SEMA Editors

RingbrothersJim and Mike Ring unveiled a ’71 Chevrolet K-5 Blazer known as “Seaker”—their first custom SUV. 

Ringbrothers returned to the SEMA Show this year with a ’71 Chevrolet K-5 Blazer known as “Seaker”—the first custom SUV by Jim and Mike Ring.

“Seaker” takes the K5 platform and adds modern performance and amenities with a show-quality finish. The custom SUV is powered by a GM LS3 crate engine with a Holley Fuel System producing 430 hp. The GM powerplant is connected to a Bowler Performance 4L60E automatic transmission, while a custom Flowmaster exhaust provides a healthy growl. An AFCO Radiator with Prestone anti-freeze provides cooling for the big engine. Suspension components are provided by RideTech, while the running boards, firewall, air box, engine covers, fan shroud, floors and side panels are all designed and fabricated by Ringbrothers.

The Blazer features a modern leather interior wrapped in laser-straight sheet metal with the help of 3M refinishing tools. Each panel was then coated in several layers of a custom BASF Glasurit color known as “Brazilian Smoke.” It also has a 1-in. body lift and larger wheel wells to make room for custom 17-in. Circle Racing wheels wrapped in BF Goodrich All-Terrain tires. The interior upholstery is by Upholstery Unlimited, with A/C provided by Vintage Air.

Thu, 11/01/2018 - 15:34

By SEMA Editors

ImpostorRachel De Barros, star of “All Girls Garage” and “Wonder Spawn,” unveiled “The Impostor”—a ’65 Chevrolet Impala and ’09 Corvette mix designed and built by Foose Design—on the opening day of the 2018 SEMA Show in Covercraft’s booth #23243.

Covercraft is featuring new products, interactions with industry personalities and “The Impostor”—a ’65 Chevrolet Impala and ’09 Corvette mix designed and built by Foose Design—in its SEMA Show booth #23243.

The Impostor combined two drastically different cars from two different eras in one masterpiece that is sure to attract crowds to the Covercraft exhibit. The Impostor was unveiled in the Covercraft booth on the opening day of the Show.

The Covercraft booth also features appearances by Rachel De Barros, star of “All Girls Garage” and “Wonder Spawn,” and Cristy Lee, star of “All Girls Garage” and “Barrett-Jackson Live” on Velocity.

De Barros will made appearances again on Thursday, November 1. Lee will be in the booth on Thursday, November 1, from 12:00 p.m.–2:00 p.m., and Friday, November 2, from 10:00 a.m.–12:00 p.m.

 

 

Thu, 11/01/2018 - 15:34

By SEMA Editors

ImpostorRachel De Barros, star of “All Girls Garage” and “Wonder Spawn,” unveiled “The Impostor”—a ’65 Chevrolet Impala and ’09 Corvette mix designed and built by Foose Design—on the opening day of the 2018 SEMA Show in Covercraft’s booth #23243.

Covercraft is featuring new products, interactions with industry personalities and “The Impostor”—a ’65 Chevrolet Impala and ’09 Corvette mix designed and built by Foose Design—in its SEMA Show booth #23243.

The Impostor combined two drastically different cars from two different eras in one masterpiece that is sure to attract crowds to the Covercraft exhibit. The Impostor was unveiled in the Covercraft booth on the opening day of the Show.

The Covercraft booth also features appearances by Rachel De Barros, star of “All Girls Garage” and “Wonder Spawn,” and Cristy Lee, star of “All Girls Garage” and “Barrett-Jackson Live” on Velocity.

De Barros will made appearances again on Thursday, November 1. Lee will be in the booth on Thursday, November 1, from 12:00 p.m.–2:00 p.m., and Friday, November 2, from 10:00 a.m.–12:00 p.m.

 

 

Thu, 11/01/2018 - 15:20

SEMA News—November 2018

NEW PRODUCTS

By SEMA Editors

SEMA Product and Catalog Showcase

For more information about placing an ad in the SEMA News Product and Catalog Showcase, contact 909-610-2030 or email sales@sema.org.

AMP Research 

AMP Reserch
AMP Research PowerStep RTS Electric Articulating Running Board

New AMP Research PowerStep RTS Electric Articulating Running Board gives your truck the convenience of the PowerStep Running Board and the look you’ve been seeking! The step design acts as a trim piece that finishes the rocker area and hides the unsightly pinch weld. Lightweight, yet rock-solid running board and rugged die-cast linkage components are crafted in the U.S.A. of aircraft-quality aluminum, black-anodized and PTFE coated for maximum corrosion protection and maintenance-free operation for decades.

www.amp-research.com

LightShield

AVS
AVS Aeroskin LightShield Hood Protector

Ahead of the curve as always, AVS proudly debuts its Aeroskin LightShield Hood Protector, the only hood protector that offers amber LED running lights for the edge of your hood! The light bar can be wired easily into the vehicle’s running lights or can be operated separately via the included cab switch kit. Precision engineered and manufactured in the U.S.A., this is the hood protector to choose for peace-of-mind protection and a dramatic distinctive look.

www.getavs.com

Trail Blade Boss 

Atturo
Trail Blade Boss

Go Wide or Go Home

The aggressive Trail Blade Boss tire series from Atturo Tire has just gotten wider with the new LT375/55R20 and LT375/45R22 sizes! Featuring the most intimidating tire design to date, the Trail Blade Boss tread is designed from the Quartermaster QSA-1 BOSS HOG knife, a blade made for heavy-duty, hardcore use. Check out these new tires and more at Atturo Booth #43221 or online at www.atturo.com.

InVisor

AVS
AVS InVisor Side Window Deflectors

New AVS InVisor Side Window Deflectors add subtle style to your vehicle while providing the functionality you demand from a side window deflector. With its revolutionary patented design that uses clips instead of tape, the InVisor Side Window Deflector easily and securely installs in the window channel creating a streamlined look that allows fresh air to circulate naturally while keeping rain and other elements out. Made in the U.S.A. and backed by a limited lifetime warranty.

www.getavs.com

AZ850

Atturo
AZ850

Tires for No Matter How You Roll

High-performance meets low-profile with the stylish AZ850, offering inside and outside tire contours to evenly distribute surface contact in order to increase handling and reduce noise level. So whether you’re looking to hug the road or grab attention, the AZ850 will make you a true believer, from a tire company that’s a true original.

Get a custom fit for the way you roll. Visit Booth #43221 or www.atturo.com to learn more.

Bushwacker

Bushwacker
Bushwacker AXT Style and DRT Style Fender Flares

Bushwacker, the off-road icon and originator of the fender flare category, introduces two innovative new fender flare designs! The AXT Style Fender Flare has a rugged, chiseled design that flows with the contours of the truck. The DRT-Style Flare has a sleek vented design for a one-of-a-kind look. Proudly made in the U.S.A. and backed by a limited lifetime warranty, custom-designed AXT and DRT Style Fender Flares protect your vehicle from on- and off-road hazards.

www.bushwacker.com

DEI

Design Engineering Inc.
DEI 2018 Product Catalog

DEI now offers close to 70 new products in their 2018 catalog for race and street performance, including their new GOLD series products in addition to new exhaust wrap options, turbo protection, improved plug boot and wire protection, line and hose protection products and race safety products. There are multiple new Boom Mat products introduced to dampen vibration and keep out heat and noise for improved speaker performance or a quieter ride, including Boom Mat tape and D-Mat insulation.

www.designengineering.com
800-264-9472

GEMA

GEMA

Gema is a pioneer in powdercoating equipment technology, offering customers the confidence and expertise that comes with being the industry’s global leader. Gema equipment is durable, flexible and engineered to last, providing increased performance, greater efficiency and a better return on investment. Product offerings include manual and automatic spray guns and booths, fast color-change equipment, gun movers, control systems and other ancillary equipment.

Call 800-628-0601 or visit www.gemapowdercoating.com for more information.

DEI

Design Engineering Inc.
DEI Easy Loom Split Line Sleeving Master Kit

DEI’s Master Kit has everything you need to add protective split line sleeving for an entire vehicle, including five different diameter split sleeves (3/16-in., 5/16-in., ½-in., ¾-in. and 1-in.), 3:1 shrink tube ends, silicone tape, nylon zip ties and electrical tape and wrap. The kit protects exposed wires, hoses and cables from heat and the elements—ideal for EFI conversions. Self-wrapping, Easy Loom is lightweight, flexible and easy to install or remove for maintenance. Part #010663.

www.designengineering.com
800-264-9472

GMI Machine

GSI Machine & Fabrication
’63–’72 C10 EFI Fuel Tank

Introducing GSI’s new line of aluminum fuel tanks for your ’63–’72 C10 truck, manufactured using the latest CNC and welding technology. Every tank is fabricated using the highest-grade aluminum and hand TIG welded. GSI’s EFI Fuel Tank includes: an EFI fuel pump assembly (AN-6 Outlet Fitting, two 10–32 threaded terminal studs for power) and an Aeromotive Stealth fuel pump.

www.gsimfab.com

Eagle Abrasives

Eagle Abrasives Inc.
Proma-X Air Random Orbital Sander

The 6-in. Proma-X Air Pneumatic Sander is an excellent tool for surface preparation and all the way to topcoat finishing. This lightweight sander is ergonomically designed with durable rubber over-molding for a comfortable grip. A specially engineered four-bearing design ensures high performance, stability and low vibration during sanding operation. Available in both vacuum-assist and non-vacuum models with options for super-tack or stick-on backup pads.

4025 Steve Reynolds Blvd. Norcross, GA 30093
888-68-EAGLE/Fax: 770-279-0727
info@eagleabrasives.com
www.eagleabrasives.com

GSI Machine

GSI Machine & Fabrication
’63–’87 C10 Air Ride Chassis

This complete hand-fabricated chassis has been engineered to produce a precision fitting and strong upgrade for your ’63–’87 Chevy or GMC truck. The GSI engineering team sought to eliminate excessive bump steer and camber gains. The rear four-link accommodates up to 24x15-in. wheels and is complemented by a Billet Watt’s Link.

877-951-1890
www.gsimfab.com

Lund NightFx

Lund
Lund NightFx Guide Lights

New NightFx Guide Lights are the latest innovation from Lund! Featuring plug-and-play functionality, installation is simple. Attach the lights anywhere on your truck, plug into the OBD port and watch them light up the night when you open any door of your vehicle or use your keyfob. The lights will remain on for 30 sec. and fade off. Sold as a set of four and backed by a three-year limited warranty.

www.lundtruck.com

ProCharger

ProCharger
’10–’15 Camaro SS, 50-State Legal

ProCharger now offers HO and Stage II supercharger systems that are 50-state legal, providing large horsepower gains of more than 50% and giving you the performance increase you want while retaining the factory airbox to meet local emissions requirements. These systems feature our easy-to-install and durable P-1SC-1 supercharger along with an eight-rib dedicated drive and all the components needed for a 100% complete, OEM-quality installation.

For more information, visit Booth #23819 or www.procharger.com or contact 913-338-2886.

ProCharger

ProCharger
’18 Jeep JL

Power up your ’18 Jeep JL with an HO Intercooled System from ProCharger and gain 50%+ hp. Our Jeep supercharger systems and tuner kits are fully engineered and include our durable, off-road proven P-1SC-1 supercharger and large air-to-air intercoolers, ready to take on any challenge. No major modifications required. We offer more options and upgrades than any supercharger company, including our black finish for supercharger, intercooler, and brackets.

Visit Booth #23819, www.procharger.com or contact 913-338-2886.

ProCharger

ProCharger
’15–’18 Ford F-150

Add 45%–55% towing power to your ’15–’18 Ford F-150 5.0L truck with our HO Intercooled System or 60%–70% horsepower with our Stage II Intercooled System. These amazing power numbers feature our durable, proven P-1SC-1 supercharger with an optional upgrade to our newest and most efficient P-1X supercharger. All 5.0L systems feature billet aluminum brackets and mounting hardware, OEM-quality fit and finish along with a dedicated eight-rib drive system for maximum belt life and performance.

For more information, visit Booth #23819 or www.procharger.com or contact 913-338-2886.

ProCharger

ProCharger
’18 Mustang GT

How does a 315 hp increase sound? Well, all you have to do is buy a stock ’18 Mustang GT, purchase the ProCharger Stage II System, bolt it on in a weekend and enjoy a monster horsepower gain. Stage II systems feature our 75%-larger intercooler for keeping air-inlet temperatures low even under extreme temperatures. Optional upgrades include our most efficient P-1X supercharger, providing a 10–15 hp gain over the existing P-1SC-1 supercharger.

For more information, visit Booth #23819 or www.procharger.com or contact 913-338-2886.

Challenger

Procharger
’15–’18 Challenger (SRT8 and R/T)

ProCharger says it was the first supercharger company to offer complete supercharger systems for 6.4L/392 and 5.7L Hemi engines. ProCharger leads the way again with power gains of more than 215 hp possible on standard premium pump gas, putting the power output of the 6.4L (392) engines at more than 700 hp with an optional race intercooler. This rivals the Dodge Hellcat at a fraction of the price, with only 7 psi of highly efficient, engine-friendly boost.

Visit Booth #23819 or www.procharger.com or contact 913-338-2886.

ProCharger

ProCharger
’17–’18 Ford Raptor

Lower air temps and better performance from ProCharger. Bigger is better (99% bigger than OEM). One of the biggest and most effective intercooler options available and yes, we think larger does matter. Especially when driving in extreme conditions where you can enjoy Raptor’s full capability, our ProCharger intercoolers are going to provide much lower air inlet temps and lower pressure drop, resulting in better performance. Supersize it!

For more information, visit Booth #23819 or www.procharger.com, or contact 913-338-2886.

Rampage

Rampage
Rampage Adjustable Cowl Cover/Light Mount

The new Rampage steel cowl cover not only protects the factory plastic cowl, it offers some options! It features an adjustable light slot for mounting and positioning the light in multiple positions, and to allow the windshield to fold down flat. This mount can be used to hold multiple lights and features heavy-duty black powdercoated finish. Lights are not included as it is a universal mount and any light brand can be used.

www.rampageproducts.com

Rampage

Prosport Gauges Inc.
Supreme Series Gauge Line
Booth #23429

Introducing the Supreme Series Gauge line featuring a clear flat lens with a hand-polished stainless bezel for that clean, classic look. These gauges feature our newest whisper-quiet Stepper Motor Movements to ensure pinpoint accuracy. This gauge line features our new upgraded plug-and-play senders (included with each gauge). They also have fully programmable warning feature built right into the gauge as well as Peak recall. Choose from amber or white LED lighting.

www.prosportgauges.com

Rampage

Rampage
Rampage Aluminum TrailCrawler Bumpers

The new Rampage front and rear aluminum bumpers are made of aircraft-grade aluminum for lightweight, lasting protection with a 3/16-in. inner steel frame for added durability. The new styling features high clearance with a low-profile design for optimal performance on the trail. The front Stubby has a 1.5-in. welded stinger, integrated winch plate and 4-in. receptacles for OE and aftermarket lights. Both bumpers include ¾-in. D-rings and a heavy-duty black powdercoated finish.

www.rampageproducts.com

Racelogic

Racelogic

VBOX Motorsport will be at SEMA—Booth #52219—with the state-of-the-art video data-logging system, the VBOX Video HD2.

Designed by racing drivers for racing drivers, the HD2 captures stunning 1080p video with graphical overlay, synchronised with 10Hz GPS and vehicle data. Circuit Tools—free, intuitive, software—allows you to improve more rapidly than you ever thought possible. VBOX Motorsport at SEMA: come and learn the quickest way to go faster.

www.vboxmotorsport.com

Rampage

Rampage
Rampage TrailCrawler Skid Plate

The new Rampage skid plate will give you ultimate protection with 3/16-in. steel construction to protect the undercarriage of your new Jeep JL. This is a simple bolt-on design with black powdercoated OE finish. The skid plate is designed to work with OE factory bumpers and most aftermarket bumpers. There are two models available so you can opt for the model with or without the 20-in. LED light bar for added visibility.

www.rampageproducts.com

Rampage

Rampage
Rampage TrailCrawler Step

Rampage’s new TrailCrawler steps will give you the confidence you need out on the trail as an extreme rock slider with 1.75-in./0.120-in. wall steel tubing. They have the stylish off-road look and this solid one-piece-designed step features a welded in steel step plate and allows for simple bolt-on installation. The steps feature a durable black powdercoated finish and are available for both the two- and four-door Jeep Wrangler JL.

www.rampageproducts.com

Xforce USA

Xforce U.S.A.
VKSB01–Smart Box

Varex Smart Box is a ground-breaking control device for Varex mufflers. Its patent-pending technology allows the user to manually and automatically adjust the exhaust sound level. Operate and change the settings via an app. The connections between the Smart Boxes and smartphones are via Bluetooth. Precise manual adjustment of Varex exhaust valve positions; custom pre-set of Varex exhaust valve positions; automatic control of Varex exhaust valve positions based on real-time data of RPM, throttle and speed. Automatic control of VAREX exhaust valve positions based on real-time geographic data.

Phone/Fax: 844-493-6723 (4 XFORCE)
www.xforceusa.com

Xforce U.S.A.

Xforce U.S.A.
ES-VW09-VMK-SB-CBS

VW Golf GTi Mark 7R has now launched into the market, making it an ideal time to launch the new stainless-steel 3-ft. catback system with Varex Muffler and Smartbox. The new catback system is made with stainless steel, making it durable to all sorts of weather. Now incorporating into the system is the Varex Smart Box. Its patent-pending technology allows the user to manually and automatically adjust the exhaust sound level of the Varex. Users can operate and make changes to the settings of the Smartbox via an elegantly designed smartphone app.

Phone/Fax: 844-493-6723 (4 XFORCE)
www.xforceusa.com

Tonno Pro

Tonno Pro
Tonno Pro UltraFold Hard Panel Tri-folding Tonneau Cover

Tonno Pro’s new UltraFold Hard Panel Tri-folding Tonneau Cover features a secure and sleek low-profile design. Its lightweight aluminum panels with fluted polymer core provide strength, durability and security, while the lightly textured matte-black powdercoated finish complements OE components. Proprietary seals protect the bed from weather and road debris. Made in the U.S.A., UltraFold comes fully assembled, installs in 10 min. or less without drilling and supports up to 350 lbs. evenly distributed.

www.tonnopro.com

Trick Flow Specialties

Trick Flow Specialties

Trick Flow Specialties doesn’t just sell high performance—they design it from scratch. The parts are fully engineered, tested and dyno proven to deliver phenomenal out-of-the-box power on Chevrolet, Ford and MOPAR engines. Increase your sales today by stocking these premium-quality and affordably priced high-performance engine components. Go online to www.trickflow.com or call Trick Flow Specialties at 888-841-6556 to see for yourself the difference Trick Flow’s advanced engineering and manufacturing makes.

Monday–Friday, 9:00 a.m.–5:00 p.m. ET
330-630-1555/888-841-6556
330-633-2504 Fax
www.trickflow.com

 

Interested in placing an ad in SEMA News?

Sales Reps by Industry Category

Scott Hartwick
909-378-4857
scotth@sema.org

  • Hot Rod Alley
  • Mobile Electronics & Technology
  • Powersports & Utility Vehicles
  • Restoration Marketplace
  • Tools & Equipment

Monica Terlouw
909-978-6695
monicat@sema.org

  • Collision Repair & Refinish
  • Restyling & Car Care Products

Warren Kosikov
909-978-6665
warrenk@sema.org

  • OEM


Alan Josse
909-978-6666
alanj@sema.org

  • Trucks, SUVs & Off-Road

Brian Paik
909-978-6677
brianp@sema.org

  • Business Services
  • Global Tire Expo
  • Wheels & Accessories

Andrea Brake
949-373-9222
andreab@performanceracing.com

Becca Butler
909-378-4864
beccab@sema.org

Brendan Gillespie
909-978-6661
brendang@sema.org

Reham Gharib
949-373-9235
rehamg@performanceracing.com

Celina Ingargiola
949-373-9214
celinai@performanceracing.com

Alan Josse
909-978-6666
alanj@sema.org

Eric Jurado
949-373-9220
ericj@performanceracing.com

  • Racing & Performance

Advertising Coordinator
David Block
909-978-6648
davidb@sema.org



Thu, 11/01/2018 - 15:20

SEMA News—November 2018

NEW PRODUCTS

By SEMA Editors

SEMA Product and Catalog Showcase

For more information about placing an ad in the SEMA News Product and Catalog Showcase, contact 909-610-2030 or email sales@sema.org.

AMP Research 

AMP Reserch
AMP Research PowerStep RTS Electric Articulating Running Board

New AMP Research PowerStep RTS Electric Articulating Running Board gives your truck the convenience of the PowerStep Running Board and the look you’ve been seeking! The step design acts as a trim piece that finishes the rocker area and hides the unsightly pinch weld. Lightweight, yet rock-solid running board and rugged die-cast linkage components are crafted in the U.S.A. of aircraft-quality aluminum, black-anodized and PTFE coated for maximum corrosion protection and maintenance-free operation for decades.

www.amp-research.com

LightShield

AVS
AVS Aeroskin LightShield Hood Protector

Ahead of the curve as always, AVS proudly debuts its Aeroskin LightShield Hood Protector, the only hood protector that offers amber LED running lights for the edge of your hood! The light bar can be wired easily into the vehicle’s running lights or can be operated separately via the included cab switch kit. Precision engineered and manufactured in the U.S.A., this is the hood protector to choose for peace-of-mind protection and a dramatic distinctive look.

www.getavs.com

Trail Blade Boss 

Atturo
Trail Blade Boss

Go Wide or Go Home

The aggressive Trail Blade Boss tire series from Atturo Tire has just gotten wider with the new LT375/55R20 and LT375/45R22 sizes! Featuring the most intimidating tire design to date, the Trail Blade Boss tread is designed from the Quartermaster QSA-1 BOSS HOG knife, a blade made for heavy-duty, hardcore use. Check out these new tires and more at Atturo Booth #43221 or online at www.atturo.com.

InVisor

AVS
AVS InVisor Side Window Deflectors

New AVS InVisor Side Window Deflectors add subtle style to your vehicle while providing the functionality you demand from a side window deflector. With its revolutionary patented design that uses clips instead of tape, the InVisor Side Window Deflector easily and securely installs in the window channel creating a streamlined look that allows fresh air to circulate naturally while keeping rain and other elements out. Made in the U.S.A. and backed by a limited lifetime warranty.

www.getavs.com

AZ850

Atturo
AZ850

Tires for No Matter How You Roll

High-performance meets low-profile with the stylish AZ850, offering inside and outside tire contours to evenly distribute surface contact in order to increase handling and reduce noise level. So whether you’re looking to hug the road or grab attention, the AZ850 will make you a true believer, from a tire company that’s a true original.

Get a custom fit for the way you roll. Visit Booth #43221 or www.atturo.com to learn more.

Bushwacker

Bushwacker
Bushwacker AXT Style and DRT Style Fender Flares

Bushwacker, the off-road icon and originator of the fender flare category, introduces two innovative new fender flare designs! The AXT Style Fender Flare has a rugged, chiseled design that flows with the contours of the truck. The DRT-Style Flare has a sleek vented design for a one-of-a-kind look. Proudly made in the U.S.A. and backed by a limited lifetime warranty, custom-designed AXT and DRT Style Fender Flares protect your vehicle from on- and off-road hazards.

www.bushwacker.com

DEI

Design Engineering Inc.
DEI 2018 Product Catalog

DEI now offers close to 70 new products in their 2018 catalog for race and street performance, including their new GOLD series products in addition to new exhaust wrap options, turbo protection, improved plug boot and wire protection, line and hose protection products and race safety products. There are multiple new Boom Mat products introduced to dampen vibration and keep out heat and noise for improved speaker performance or a quieter ride, including Boom Mat tape and D-Mat insulation.

www.designengineering.com
800-264-9472

GEMA

GEMA

Gema is a pioneer in powdercoating equipment technology, offering customers the confidence and expertise that comes with being the industry’s global leader. Gema equipment is durable, flexible and engineered to last, providing increased performance, greater efficiency and a better return on investment. Product offerings include manual and automatic spray guns and booths, fast color-change equipment, gun movers, control systems and other ancillary equipment.

Call 800-628-0601 or visit www.gemapowdercoating.com for more information.

DEI

Design Engineering Inc.
DEI Easy Loom Split Line Sleeving Master Kit

DEI’s Master Kit has everything you need to add protective split line sleeving for an entire vehicle, including five different diameter split sleeves (3/16-in., 5/16-in., ½-in., ¾-in. and 1-in.), 3:1 shrink tube ends, silicone tape, nylon zip ties and electrical tape and wrap. The kit protects exposed wires, hoses and cables from heat and the elements—ideal for EFI conversions. Self-wrapping, Easy Loom is lightweight, flexible and easy to install or remove for maintenance. Part #010663.

www.designengineering.com
800-264-9472

GMI Machine

GSI Machine & Fabrication
’63–’72 C10 EFI Fuel Tank

Introducing GSI’s new line of aluminum fuel tanks for your ’63–’72 C10 truck, manufactured using the latest CNC and welding technology. Every tank is fabricated using the highest-grade aluminum and hand TIG welded. GSI’s EFI Fuel Tank includes: an EFI fuel pump assembly (AN-6 Outlet Fitting, two 10–32 threaded terminal studs for power) and an Aeromotive Stealth fuel pump.

www.gsimfab.com

Eagle Abrasives

Eagle Abrasives Inc.
Proma-X Air Random Orbital Sander

The 6-in. Proma-X Air Pneumatic Sander is an excellent tool for surface preparation and all the way to topcoat finishing. This lightweight sander is ergonomically designed with durable rubber over-molding for a comfortable grip. A specially engineered four-bearing design ensures high performance, stability and low vibration during sanding operation. Available in both vacuum-assist and non-vacuum models with options for super-tack or stick-on backup pads.

4025 Steve Reynolds Blvd. Norcross, GA 30093
888-68-EAGLE/Fax: 770-279-0727
info@eagleabrasives.com
www.eagleabrasives.com

GSI Machine

GSI Machine & Fabrication
’63–’87 C10 Air Ride Chassis

This complete hand-fabricated chassis has been engineered to produce a precision fitting and strong upgrade for your ’63–’87 Chevy or GMC truck. The GSI engineering team sought to eliminate excessive bump steer and camber gains. The rear four-link accommodates up to 24x15-in. wheels and is complemented by a Billet Watt’s Link.

877-951-1890
www.gsimfab.com

Lund NightFx

Lund
Lund NightFx Guide Lights

New NightFx Guide Lights are the latest innovation from Lund! Featuring plug-and-play functionality, installation is simple. Attach the lights anywhere on your truck, plug into the OBD port and watch them light up the night when you open any door of your vehicle or use your keyfob. The lights will remain on for 30 sec. and fade off. Sold as a set of four and backed by a three-year limited warranty.

www.lundtruck.com

ProCharger

ProCharger
’10–’15 Camaro SS, 50-State Legal

ProCharger now offers HO and Stage II supercharger systems that are 50-state legal, providing large horsepower gains of more than 50% and giving you the performance increase you want while retaining the factory airbox to meet local emissions requirements. These systems feature our easy-to-install and durable P-1SC-1 supercharger along with an eight-rib dedicated drive and all the components needed for a 100% complete, OEM-quality installation.

For more information, visit Booth #23819 or www.procharger.com or contact 913-338-2886.

ProCharger

ProCharger
’18 Jeep JL

Power up your ’18 Jeep JL with an HO Intercooled System from ProCharger and gain 50%+ hp. Our Jeep supercharger systems and tuner kits are fully engineered and include our durable, off-road proven P-1SC-1 supercharger and large air-to-air intercoolers, ready to take on any challenge. No major modifications required. We offer more options and upgrades than any supercharger company, including our black finish for supercharger, intercooler, and brackets.

Visit Booth #23819, www.procharger.com or contact 913-338-2886.

ProCharger

ProCharger
’15–’18 Ford F-150

Add 45%–55% towing power to your ’15–’18 Ford F-150 5.0L truck with our HO Intercooled System or 60%–70% horsepower with our Stage II Intercooled System. These amazing power numbers feature our durable, proven P-1SC-1 supercharger with an optional upgrade to our newest and most efficient P-1X supercharger. All 5.0L systems feature billet aluminum brackets and mounting hardware, OEM-quality fit and finish along with a dedicated eight-rib drive system for maximum belt life and performance.

For more information, visit Booth #23819 or www.procharger.com or contact 913-338-2886.

ProCharger

ProCharger
’18 Mustang GT

How does a 315 hp increase sound? Well, all you have to do is buy a stock ’18 Mustang GT, purchase the ProCharger Stage II System, bolt it on in a weekend and enjoy a monster horsepower gain. Stage II systems feature our 75%-larger intercooler for keeping air-inlet temperatures low even under extreme temperatures. Optional upgrades include our most efficient P-1X supercharger, providing a 10–15 hp gain over the existing P-1SC-1 supercharger.

For more information, visit Booth #23819 or www.procharger.com or contact 913-338-2886.

Challenger

Procharger
’15–’18 Challenger (SRT8 and R/T)

ProCharger says it was the first supercharger company to offer complete supercharger systems for 6.4L/392 and 5.7L Hemi engines. ProCharger leads the way again with power gains of more than 215 hp possible on standard premium pump gas, putting the power output of the 6.4L (392) engines at more than 700 hp with an optional race intercooler. This rivals the Dodge Hellcat at a fraction of the price, with only 7 psi of highly efficient, engine-friendly boost.

Visit Booth #23819 or www.procharger.com or contact 913-338-2886.

ProCharger

ProCharger
’17–’18 Ford Raptor

Lower air temps and better performance from ProCharger. Bigger is better (99% bigger than OEM). One of the biggest and most effective intercooler options available and yes, we think larger does matter. Especially when driving in extreme conditions where you can enjoy Raptor’s full capability, our ProCharger intercoolers are going to provide much lower air inlet temps and lower pressure drop, resulting in better performance. Supersize it!

For more information, visit Booth #23819 or www.procharger.com, or contact 913-338-2886.

Rampage

Rampage
Rampage Adjustable Cowl Cover/Light Mount

The new Rampage steel cowl cover not only protects the factory plastic cowl, it offers some options! It features an adjustable light slot for mounting and positioning the light in multiple positions, and to allow the windshield to fold down flat. This mount can be used to hold multiple lights and features heavy-duty black powdercoated finish. Lights are not included as it is a universal mount and any light brand can be used.

www.rampageproducts.com

Rampage

Prosport Gauges Inc.
Supreme Series Gauge Line
Booth #23429

Introducing the Supreme Series Gauge line featuring a clear flat lens with a hand-polished stainless bezel for that clean, classic look. These gauges feature our newest whisper-quiet Stepper Motor Movements to ensure pinpoint accuracy. This gauge line features our new upgraded plug-and-play senders (included with each gauge). They also have fully programmable warning feature built right into the gauge as well as Peak recall. Choose from amber or white LED lighting.

www.prosportgauges.com

Rampage

Rampage
Rampage Aluminum TrailCrawler Bumpers

The new Rampage front and rear aluminum bumpers are made of aircraft-grade aluminum for lightweight, lasting protection with a 3/16-in. inner steel frame for added durability. The new styling features high clearance with a low-profile design for optimal performance on the trail. The front Stubby has a 1.5-in. welded stinger, integrated winch plate and 4-in. receptacles for OE and aftermarket lights. Both bumpers include ¾-in. D-rings and a heavy-duty black powdercoated finish.

www.rampageproducts.com

Racelogic

Racelogic

VBOX Motorsport will be at SEMA—Booth #52219—with the state-of-the-art video data-logging system, the VBOX Video HD2.

Designed by racing drivers for racing drivers, the HD2 captures stunning 1080p video with graphical overlay, synchronised with 10Hz GPS and vehicle data. Circuit Tools—free, intuitive, software—allows you to improve more rapidly than you ever thought possible. VBOX Motorsport at SEMA: come and learn the quickest way to go faster.

www.vboxmotorsport.com

Rampage

Rampage
Rampage TrailCrawler Skid Plate

The new Rampage skid plate will give you ultimate protection with 3/16-in. steel construction to protect the undercarriage of your new Jeep JL. This is a simple bolt-on design with black powdercoated OE finish. The skid plate is designed to work with OE factory bumpers and most aftermarket bumpers. There are two models available so you can opt for the model with or without the 20-in. LED light bar for added visibility.

www.rampageproducts.com

Rampage

Rampage
Rampage TrailCrawler Step

Rampage’s new TrailCrawler steps will give you the confidence you need out on the trail as an extreme rock slider with 1.75-in./0.120-in. wall steel tubing. They have the stylish off-road look and this solid one-piece-designed step features a welded in steel step plate and allows for simple bolt-on installation. The steps feature a durable black powdercoated finish and are available for both the two- and four-door Jeep Wrangler JL.

www.rampageproducts.com

Xforce USA

Xforce U.S.A.
VKSB01–Smart Box

Varex Smart Box is a ground-breaking control device for Varex mufflers. Its patent-pending technology allows the user to manually and automatically adjust the exhaust sound level. Operate and change the settings via an app. The connections between the Smart Boxes and smartphones are via Bluetooth. Precise manual adjustment of Varex exhaust valve positions; custom pre-set of Varex exhaust valve positions; automatic control of Varex exhaust valve positions based on real-time data of RPM, throttle and speed. Automatic control of VAREX exhaust valve positions based on real-time geographic data.

Phone/Fax: 844-493-6723 (4 XFORCE)
www.xforceusa.com

Xforce U.S.A.

Xforce U.S.A.
ES-VW09-VMK-SB-CBS

VW Golf GTi Mark 7R has now launched into the market, making it an ideal time to launch the new stainless-steel 3-ft. catback system with Varex Muffler and Smartbox. The new catback system is made with stainless steel, making it durable to all sorts of weather. Now incorporating into the system is the Varex Smart Box. Its patent-pending technology allows the user to manually and automatically adjust the exhaust sound level of the Varex. Users can operate and make changes to the settings of the Smartbox via an elegantly designed smartphone app.

Phone/Fax: 844-493-6723 (4 XFORCE)
www.xforceusa.com

Tonno Pro

Tonno Pro
Tonno Pro UltraFold Hard Panel Tri-folding Tonneau Cover

Tonno Pro’s new UltraFold Hard Panel Tri-folding Tonneau Cover features a secure and sleek low-profile design. Its lightweight aluminum panels with fluted polymer core provide strength, durability and security, while the lightly textured matte-black powdercoated finish complements OE components. Proprietary seals protect the bed from weather and road debris. Made in the U.S.A., UltraFold comes fully assembled, installs in 10 min. or less without drilling and supports up to 350 lbs. evenly distributed.

www.tonnopro.com

Trick Flow Specialties

Trick Flow Specialties

Trick Flow Specialties doesn’t just sell high performance—they design it from scratch. The parts are fully engineered, tested and dyno proven to deliver phenomenal out-of-the-box power on Chevrolet, Ford and MOPAR engines. Increase your sales today by stocking these premium-quality and affordably priced high-performance engine components. Go online to www.trickflow.com or call Trick Flow Specialties at 888-841-6556 to see for yourself the difference Trick Flow’s advanced engineering and manufacturing makes.

Monday–Friday, 9:00 a.m.–5:00 p.m. ET
330-630-1555/888-841-6556
330-633-2504 Fax
www.trickflow.com

 

Interested in placing an ad in SEMA News?

Sales Reps by Industry Category

Scott Hartwick
909-378-4857
scotth@sema.org

  • Hot Rod Alley
  • Mobile Electronics & Technology
  • Powersports & Utility Vehicles
  • Restoration Marketplace
  • Tools & Equipment

Monica Terlouw
909-978-6695
monicat@sema.org

  • Collision Repair & Refinish
  • Restyling & Car Care Products

Warren Kosikov
909-978-6665
warrenk@sema.org

  • OEM


Alan Josse
909-978-6666
alanj@sema.org

  • Trucks, SUVs & Off-Road

Brian Paik
909-978-6677
brianp@sema.org

  • Business Services
  • Global Tire Expo
  • Wheels & Accessories

Andrea Brake
949-373-9222
andreab@performanceracing.com

Becca Butler
909-378-4864
beccab@sema.org

Brendan Gillespie
909-978-6661
brendang@sema.org

Reham Gharib
949-373-9235
rehamg@performanceracing.com

Celina Ingargiola
949-373-9214
celinai@performanceracing.com

Alan Josse
909-978-6666
alanj@sema.org

Eric Jurado
949-373-9220
ericj@performanceracing.com

  • Racing & Performance

Advertising Coordinator
David Block
909-978-6648
davidb@sema.org



Thu, 11/01/2018 - 15:04

SEMA News—November 2018

2018 Spotlight Exhibitors Products

 

AeroLidz

AeroLidz
AeroLidz
Booth #52114

The AeroLidz cover redirects air around the light bar, eliminating deafening whistles and howls while protecting light bars on the trails. It is easy to take off for cleaning. The durable polycarbonate is UV stabilized. The open design allows heat to escape through the rear and sides as intended by the light manufacturer. Crystal clear means no light loss, like you have no cover at all. Universal fit for all dual-row light bars.

PN: DUL101

Cup Holder Hero 

Cup Holder Hero
Custom Fit Cup Holder, Door & Center Console Liners
Booth #52050

Cup Holder Hero is the easiest way to add a splash of color and protect the interior of any new car. Think of them like kits of mini custom-fit floor liners. Simply drop the custom-fit pieces of rubber into your cup holders, doors and other pockets to protect from spills, crumbs, scratches and rattling objects. Available in 50+ car models and in 10+ colors. Visit www.cupholderhero.com/dealers to start selling today.

Cementex 

Cementex Products Inc.
EV Safety Toolkit
Booth #50006

A reintroduction to a convenient way to store your insulated tools used in today’s EV market. Safe tools are the most important part of doing the job right. Cementex’s complete offering of American-made double-insulated 1,000V safety tools and personal protective equipment help you meet the requirements of OSHA, NFPA 70E and CSA Z462 standards.

Dannmar Equipment 

Dannmar Equipment
MaxMoto
Booth #50237

MaxMoto is a portable motorcycle lift designed to handle up to 2,500 lb./1,136 kg. The lift height is 48 in.; 110 VAC/60 Hrz. Fits in the average home garage. Comes with flush-mounted anchors to bolt the lift down when in use. Remove bolts and roll away for storage when not needed.

Cooper Tire 

Cooper Tire
Cooper Discoverer AT3
Booth #43019

From Cooper, the trusted name in truck tires, come three reliable new Discoverer tires for one tough world:

AT3 4S with Adaptive-Traction Technology for better grip in all seasons (3PMSF stamped).

AT3 LT with Durable-Tread Technology for superior Cut & Chip resistance.

AT3 XLT with Durable-Tread + Rugged Traction Shoulders for increased off-road performance.

Dometic 

Dometic
PLB40 Portable Lithium Battery
Booth #34221

The Dometic PLB40 portable lithium battery is designed specifically for powered coolers and fridge/freezers. The lightweight and powerful LiFePo4 lithium battery technology used in the PLB40 produces a true 12.8 V while delivering 40 Ah or 500 Wh of power per hour that’s perfect for a Dometic CFX and your favorite 12V and USB accessories.

PN: PLB40

Edwards Manufacturing/JET 

Edwards Manufacturing/JET
Edwards Hole Saw Tube/Pipe Notcher
Booth #10131

The Edwards Hole Saw Notcher is designed to take the guesswork out of fabricating round tube or pipe. A must-have for any fabricator, our Hole Saw Notcher features a large-capacity vise, multiple alignment tools and a powerful 3/4hp motor to handle any notching project. Proudly made in the U.S.A.

PN: HS1000

FenSens Smart Car Accessories

FenSens Smart Car Accessories
FenSens Smart Wireless Parking Sensor
Booth #52037

The FenSens Smart Wireless Parking Sensor makes adding collision safety and protection equipment to older vehicle cars painless and affordable. An industry-leading plug-and-play design finally makes aftermarket options more available than ever for today’s on-demand consumer. The universal device is 100% wireless and smartphone compatible.

Energy Suspension 

Energy Suspension
Rock-Flex Suspension Systems
Booth #23267

Energy Suspension’s new Rock-Flex Suspension Systems are a revolutionary way to maximize the performance from your ’18+ Jeep Wrangler JL by augmenting the Jeep’s already great suspension to make it better instead of simply looking at what can be replaced. The system features 1.5–2 in. adjustable ride height, and our Rock-Flex bushing technology provides an additional 25% more articulation than the factory bushings when installed in the factory control arms, as well as providing caster correction to correct alignment. Rock-Flex suspensions rival performance of much more expensive and invasive systems, making clearance for larger tires, while also providing better on road handling you have come to expect from Energy Suspension Hyper-Flex Polyurethane products.

FiTech EFI 

FiTech EFI
Retro LS 650hp EFI System
Booth #21729

If you’ve been hesitant to switch to EFI because you like the look of a carburetor, FiTech’s Retro LS system is your answer. This system combines old-school carburetor looks with EFI technology and reliability. Available only from FiTech, the leader in EFI and fuel technology systems.

PN: 37001

Hyperco–MW Industries 

Hyperco–MW Industries
UTV Performance Spring Kit
Booth #32255

This kit is designed to improve the overall ride quality and performance of your UTV by featuring the race-winning and trail-dominating spring technology that Hyperco is known for. The kit includes the Hypercoil springs and hardware (crossover nuts and sliders) needed for a complete suspension spring upgrade. Engineered and manufactured in the U.S.A.

PN: 1201PO-XP1000-1

EZ PULLEY 

EZ PULLEY
EZ Pulley
Booth #16611

Diagnose engine component failures with EZ Pulley, the only digital diagnostic tool for engine component failures. Diagnose with confidence knowing it’s going to be fixed right the first time with no injuries—whether it’s the alternator, A/C compressor, power-steering pump, idler or tensioner pulleys. No more screwdriver in your ear to diagnose this breakdown. EZ Pulley diagnostics done right! Communicate with each component bearing to properly diagnose with the EZ Pulley App and EZ Pulley Device.

inurZONE 

inurZONE
NEATO
Booth #53429

No matter what job you’re doing, the key to success isn’t how hard you work, it’s how efficient you are at achieving your task. If you work with hand tools, this ethos couldn’t be more true. That’s why I developed NEATO, a breakthrough product that places all the tools you’re working with right at your fingertips. Its innovative design has three flexible arms that connect with interchangeable attachments from a magnetized board and tray for smaller items, to a cell phone holder, funnel and a high-powered light. NEATO helps you tackle any job with ease! On the move? NEATO’s adaptable base anchors to virtually any surface so you can set up shop wherever you go.

KISAE Technology 

KISAE Technology
ABSO DC-DC Battery Charger
Booth #51211

ABSO DC-DC Battery Chargers: Recharge batteries in your van, RV or truck from the alternator or solar compact chargers. The chargers come in 30A (DMT1230) and 50A (DMT1250) sizes and provide a three-stage battery charge to the auxiliary battery. The dual input may be either the engine alternator or MPPT (maximum power point tracking) solar panel.

PN: DMT1250

ITW Evercoat 

ITW Evercoat
Poly Magic Polymer Protective Coating
Booth #10627

Auto Magic Announces An Innovative Polymer Protectant Spray

Poly Magic Polymer Protectant Coating by Auto Magic can be used on wet or dry exterior surfaces and provides a long-lasting shine and protection to clearcoats and other plastic surfaces. Simply spray on and wipe off to reveal a brilliant shine. Formulated to be static resistant and provide UV protection, Poly Magic enhances rubber side molding and trim without blushing or whitening. VOC-compliant formula.

LastBoks

LastBoks
LastBoks
Booth #37200

LastBoks is a new cargo box that fits in the rear end of your truck, SUV or crossover. Its purpose is to keep your cargo secure and within reach. At the same time, LastBoks protects your vehicle from spills or a messy cargo. If it gets dirty, simply hose it out and you’re ready to go. LastBoks is lightweight and durable with a skid-resistant surface.

Marvel Mystery Oil 

Marvel Mystery Oil
Original Oil Enhancer and Fuel Treatment
Booth #53303

For more than 95 years, Marvel Mystery Oil has been helping hardworking engines work better. Its unparalleled technology cleans, lubricates and protects in a way other fuel and motor treatments can’t match. Add Marvel to your gas tank or crankcase to restore engine performance.

PN: MM13R

ITW Evercoat 

ITW Evercoat
OPTEX Color Changing Body Filler and Putty
Booth #10627

New Body Filler and Putty Technology From Evercoat

Evercoat, the number-one brand of body filler and putty announces Rage OPTEX premium body filler with color change technology. OPTEX helps take the guesswork out of the application process by changing color from pink to light green, letting the bodyshop technician know the repair is properly catalyzed and ready to sand. Properly catalyzed body filler means a better repair with less rework, saving body shops time and money. For more information, visit www.evercoat.com.

MITO Corp. 

MITO Corp.
SplitSecnd
Booth #11661

You can’t always be in the car with your teen, senior or fleet driver...SplitSecnd can. Designed to plug into any 12V lighter outlet, the onboard cellular device instantly connects your driver with live assistance if a crash is detected. Our GPS technology and companion dashboard app lets you to keep up with your driver location status without distracting them and gives you peace of mind with destination arrival and crossed boundary alerts. Safety, simplified.

PN: 60-SPLITSECND

 

Newarc Tech LLC
NewArc SRS-3 Portable Wheel Straightening System
Booth #52030

The NewArc SRS-3 Wheel Straightening System with dual-axis capability is the only device on the market today that is proven effective in straightening automotive wheels to SAE safety standards as published in SAE tech paper 2016-01-1573. The SRS-3 model is targeted for use in the auto repair shop. It has a smaller aluminum frame, is portable for ease of use, requires minimum training, and boasts an ROI of less than six months.

PN: SRS-3

Mountain Off Road M.O.R.E.

Mountain Off Road M.O.R.E.
Jeep Wrangler JL Dead Pedal
Booth #31279

You will drive in total comfort on the highway or trail in your Jeep Wrangler JL. This Dead Pedal mounts just to the left of your brake pedal and will take pressure off your ankle and hamstring on long trips or on rock and rolling trails. It is an easy install using factory holes, no drilling required. Our most popular product.

ORBIS 

ORBIS
ORBIS Ring-Drive
Booth #46229

The electrically powered ORBIS Ring-Drive wheels add 50 hp per wheel and simultaneously improve mechanical braking with zero penalty in unsprung weight. The system is a true bolt-on that currently converts FWD to AWD, yielding additional improvements in torque, acceleration, fuel economy and emissions.

SHAVIV USA 

SHAVIV USA
Auto Burr Professional Kit
Booth #10382

The ideal deburring kit for auto mechanics and car lovers. The kit contains 10 multi-purpose tools for deburring and chamfering metals, chrome parts, rims, cast iron and aluminum. The Auto Burr Professional Kit can assist with deburring straight edges, hole edges, outside diameters, pipes, brake lines and other automotive work pieces that involve the cleaning of edges.

PN: 90117

Mountain Off Road M.O.R.E. 

Mountain Off Road M.O.R.E.
Jeep Wrangler JL Hide-A-Step
Booth #31279

Now it is easy to get into your Jeep with those large tires! This affordable step is easy to install.

  • This step lowers your step up 11 in.

  • Quick disconnect: pull two pins and the Hide-A-Step will remove easy for when you want to go wheelin’.

  • Class IV zinc plating protects against harsh winter conditions.

  • Fits the front or rear door.
 

The Wax Shop
Rebuild 2000 Medium-Cut Compound
Booth #53303

Rebuild’s proprietary Hybrid Abrasive Technology removes up to 2,000-grit paint imperfections with unmet ease, leaving a high-gloss shine that is ready for wax or sealant. It is a medium-cut polish that quickly removes swirl and sanding marks as well as paint imperfections caused by everyday use and washing.

PN: 50956

STO N SHO 

STO N SHO
Quick-Release Front License Plate Bracket
Booth #12575

Big Mike’s Performance Parts’ STO N SHO is a vehicle-specific Quick-Release Front License Plate Bracket. Now available for off-road vehicles, this new STO N SHO is designed for vehicles equipped with either a Roller or Hawse fairlead. An optional GoPro camera mount is also available to record all your off-road adventures. While this particular STO N SHO is designed for off-road vehicles, the STO N SHO is available for several makes and models.

PN: SNS138

Top Speed

Top Speed
Top Speed Titanium F430 Exhaust System
Booth #51103

Top Speed Full Titanium exhaust system for ’05–’09 Ferrari F430s. The entire system is hand-welded, back-purged, pie-cut, grade-5 titanium. This system features burnt-blue quad 102mm tips. Valves add the ability to route the exhaust through a set of resonators for a quieter tone or flow straight through for an aggressive tone, thus optimizing power.

Vöxx Wheels 

Vöxx Wheels
Turin SUV 6-Lug With Flip-Cap
Booth #46033

The new Vöxx Turin wheel is designed for SUV applications utilizing Vöxx’s unique flip-cap design that allows for multiple vehicle fitment. Available in 17-, 18- and 20-in. sizes for PCD 6x120 through 6x139.7 in.

 

 

 

Thu, 11/01/2018 - 15:04

SEMA News—November 2018

2018 Spotlight Exhibitors Products

 

AeroLidz

AeroLidz
AeroLidz
Booth #52114

The AeroLidz cover redirects air around the light bar, eliminating deafening whistles and howls while protecting light bars on the trails. It is easy to take off for cleaning. The durable polycarbonate is UV stabilized. The open design allows heat to escape through the rear and sides as intended by the light manufacturer. Crystal clear means no light loss, like you have no cover at all. Universal fit for all dual-row light bars.

PN: DUL101

Cup Holder Hero 

Cup Holder Hero
Custom Fit Cup Holder, Door & Center Console Liners
Booth #52050

Cup Holder Hero is the easiest way to add a splash of color and protect the interior of any new car. Think of them like kits of mini custom-fit floor liners. Simply drop the custom-fit pieces of rubber into your cup holders, doors and other pockets to protect from spills, crumbs, scratches and rattling objects. Available in 50+ car models and in 10+ colors. Visit www.cupholderhero.com/dealers to start selling today.

Cementex 

Cementex Products Inc.
EV Safety Toolkit
Booth #50006

A reintroduction to a convenient way to store your insulated tools used in today’s EV market. Safe tools are the most important part of doing the job right. Cementex’s complete offering of American-made double-insulated 1,000V safety tools and personal protective equipment help you meet the requirements of OSHA, NFPA 70E and CSA Z462 standards.

Dannmar Equipment 

Dannmar Equipment
MaxMoto
Booth #50237

MaxMoto is a portable motorcycle lift designed to handle up to 2,500 lb./1,136 kg. The lift height is 48 in.; 110 VAC/60 Hrz. Fits in the average home garage. Comes with flush-mounted anchors to bolt the lift down when in use. Remove bolts and roll away for storage when not needed.

Cooper Tire 

Cooper Tire
Cooper Discoverer AT3
Booth #43019

From Cooper, the trusted name in truck tires, come three reliable new Discoverer tires for one tough world:

AT3 4S with Adaptive-Traction Technology for better grip in all seasons (3PMSF stamped).

AT3 LT with Durable-Tread Technology for superior Cut & Chip resistance.

AT3 XLT with Durable-Tread + Rugged Traction Shoulders for increased off-road performance.

Dometic 

Dometic
PLB40 Portable Lithium Battery
Booth #34221

The Dometic PLB40 portable lithium battery is designed specifically for powered coolers and fridge/freezers. The lightweight and powerful LiFePo4 lithium battery technology used in the PLB40 produces a true 12.8 V while delivering 40 Ah or 500 Wh of power per hour that’s perfect for a Dometic CFX and your favorite 12V and USB accessories.

PN: PLB40

Edwards Manufacturing/JET 

Edwards Manufacturing/JET
Edwards Hole Saw Tube/Pipe Notcher
Booth #10131

The Edwards Hole Saw Notcher is designed to take the guesswork out of fabricating round tube or pipe. A must-have for any fabricator, our Hole Saw Notcher features a large-capacity vise, multiple alignment tools and a powerful 3/4hp motor to handle any notching project. Proudly made in the U.S.A.

PN: HS1000

FenSens Smart Car Accessories

FenSens Smart Car Accessories
FenSens Smart Wireless Parking Sensor
Booth #52037

The FenSens Smart Wireless Parking Sensor makes adding collision safety and protection equipment to older vehicle cars painless and affordable. An industry-leading plug-and-play design finally makes aftermarket options more available than ever for today’s on-demand consumer. The universal device is 100% wireless and smartphone compatible.

Energy Suspension 

Energy Suspension
Rock-Flex Suspension Systems
Booth #23267

Energy Suspension’s new Rock-Flex Suspension Systems are a revolutionary way to maximize the performance from your ’18+ Jeep Wrangler JL by augmenting the Jeep’s already great suspension to make it better instead of simply looking at what can be replaced. The system features 1.5–2 in. adjustable ride height, and our Rock-Flex bushing technology provides an additional 25% more articulation than the factory bushings when installed in the factory control arms, as well as providing caster correction to correct alignment. Rock-Flex suspensions rival performance of much more expensive and invasive systems, making clearance for larger tires, while also providing better on road handling you have come to expect from Energy Suspension Hyper-Flex Polyurethane products.

FiTech EFI 

FiTech EFI
Retro LS 650hp EFI System
Booth #21729

If you’ve been hesitant to switch to EFI because you like the look of a carburetor, FiTech’s Retro LS system is your answer. This system combines old-school carburetor looks with EFI technology and reliability. Available only from FiTech, the leader in EFI and fuel technology systems.

PN: 37001

Hyperco–MW Industries 

Hyperco–MW Industries
UTV Performance Spring Kit
Booth #32255

This kit is designed to improve the overall ride quality and performance of your UTV by featuring the race-winning and trail-dominating spring technology that Hyperco is known for. The kit includes the Hypercoil springs and hardware (crossover nuts and sliders) needed for a complete suspension spring upgrade. Engineered and manufactured in the U.S.A.

PN: 1201PO-XP1000-1

EZ PULLEY 

EZ PULLEY
EZ Pulley
Booth #16611

Diagnose engine component failures with EZ Pulley, the only digital diagnostic tool for engine component failures. Diagnose with confidence knowing it’s going to be fixed right the first time with no injuries—whether it’s the alternator, A/C compressor, power-steering pump, idler or tensioner pulleys. No more screwdriver in your ear to diagnose this breakdown. EZ Pulley diagnostics done right! Communicate with each component bearing to properly diagnose with the EZ Pulley App and EZ Pulley Device.

inurZONE 

inurZONE
NEATO
Booth #53429

No matter what job you’re doing, the key to success isn’t how hard you work, it’s how efficient you are at achieving your task. If you work with hand tools, this ethos couldn’t be more true. That’s why I developed NEATO, a breakthrough product that places all the tools you’re working with right at your fingertips. Its innovative design has three flexible arms that connect with interchangeable attachments from a magnetized board and tray for smaller items, to a cell phone holder, funnel and a high-powered light. NEATO helps you tackle any job with ease! On the move? NEATO’s adaptable base anchors to virtually any surface so you can set up shop wherever you go.

KISAE Technology 

KISAE Technology
ABSO DC-DC Battery Charger
Booth #51211

ABSO DC-DC Battery Chargers: Recharge batteries in your van, RV or truck from the alternator or solar compact chargers. The chargers come in 30A (DMT1230) and 50A (DMT1250) sizes and provide a three-stage battery charge to the auxiliary battery. The dual input may be either the engine alternator or MPPT (maximum power point tracking) solar panel.

PN: DMT1250

ITW Evercoat 

ITW Evercoat
Poly Magic Polymer Protective Coating
Booth #10627

Auto Magic Announces An Innovative Polymer Protectant Spray

Poly Magic Polymer Protectant Coating by Auto Magic can be used on wet or dry exterior surfaces and provides a long-lasting shine and protection to clearcoats and other plastic surfaces. Simply spray on and wipe off to reveal a brilliant shine. Formulated to be static resistant and provide UV protection, Poly Magic enhances rubber side molding and trim without blushing or whitening. VOC-compliant formula.

LastBoks

LastBoks
LastBoks
Booth #37200

LastBoks is a new cargo box that fits in the rear end of your truck, SUV or crossover. Its purpose is to keep your cargo secure and within reach. At the same time, LastBoks protects your vehicle from spills or a messy cargo. If it gets dirty, simply hose it out and you’re ready to go. LastBoks is lightweight and durable with a skid-resistant surface.

Marvel Mystery Oil 

Marvel Mystery Oil
Original Oil Enhancer and Fuel Treatment
Booth #53303

For more than 95 years, Marvel Mystery Oil has been helping hardworking engines work better. Its unparalleled technology cleans, lubricates and protects in a way other fuel and motor treatments can’t match. Add Marvel to your gas tank or crankcase to restore engine performance.

PN: MM13R

ITW Evercoat 

ITW Evercoat
OPTEX Color Changing Body Filler and Putty
Booth #10627

New Body Filler and Putty Technology From Evercoat

Evercoat, the number-one brand of body filler and putty announces Rage OPTEX premium body filler with color change technology. OPTEX helps take the guesswork out of the application process by changing color from pink to light green, letting the bodyshop technician know the repair is properly catalyzed and ready to sand. Properly catalyzed body filler means a better repair with less rework, saving body shops time and money. For more information, visit www.evercoat.com.

MITO Corp. 

MITO Corp.
SplitSecnd
Booth #11661

You can’t always be in the car with your teen, senior or fleet driver...SplitSecnd can. Designed to plug into any 12V lighter outlet, the onboard cellular device instantly connects your driver with live assistance if a crash is detected. Our GPS technology and companion dashboard app lets you to keep up with your driver location status without distracting them and gives you peace of mind with destination arrival and crossed boundary alerts. Safety, simplified.

PN: 60-SPLITSECND

 

Newarc Tech LLC
NewArc SRS-3 Portable Wheel Straightening System
Booth #52030

The NewArc SRS-3 Wheel Straightening System with dual-axis capability is the only device on the market today that is proven effective in straightening automotive wheels to SAE safety standards as published in SAE tech paper 2016-01-1573. The SRS-3 model is targeted for use in the auto repair shop. It has a smaller aluminum frame, is portable for ease of use, requires minimum training, and boasts an ROI of less than six months.

PN: SRS-3

Mountain Off Road M.O.R.E.

Mountain Off Road M.O.R.E.
Jeep Wrangler JL Dead Pedal
Booth #31279

You will drive in total comfort on the highway or trail in your Jeep Wrangler JL. This Dead Pedal mounts just to the left of your brake pedal and will take pressure off your ankle and hamstring on long trips or on rock and rolling trails. It is an easy install using factory holes, no drilling required. Our most popular product.

ORBIS 

ORBIS
ORBIS Ring-Drive
Booth #46229

The electrically powered ORBIS Ring-Drive wheels add 50 hp per wheel and simultaneously improve mechanical braking with zero penalty in unsprung weight. The system is a true bolt-on that currently converts FWD to AWD, yielding additional improvements in torque, acceleration, fuel economy and emissions.

SHAVIV USA 

SHAVIV USA
Auto Burr Professional Kit
Booth #10382

The ideal deburring kit for auto mechanics and car lovers. The kit contains 10 multi-purpose tools for deburring and chamfering metals, chrome parts, rims, cast iron and aluminum. The Auto Burr Professional Kit can assist with deburring straight edges, hole edges, outside diameters, pipes, brake lines and other automotive work pieces that involve the cleaning of edges.

PN: 90117

Mountain Off Road M.O.R.E. 

Mountain Off Road M.O.R.E.
Jeep Wrangler JL Hide-A-Step
Booth #31279

Now it is easy to get into your Jeep with those large tires! This affordable step is easy to install.

  • This step lowers your step up 11 in.

  • Quick disconnect: pull two pins and the Hide-A-Step will remove easy for when you want to go wheelin’.

  • Class IV zinc plating protects against harsh winter conditions.

  • Fits the front or rear door.
 

The Wax Shop
Rebuild 2000 Medium-Cut Compound
Booth #53303

Rebuild’s proprietary Hybrid Abrasive Technology removes up to 2,000-grit paint imperfections with unmet ease, leaving a high-gloss shine that is ready for wax or sealant. It is a medium-cut polish that quickly removes swirl and sanding marks as well as paint imperfections caused by everyday use and washing.

PN: 50956

STO N SHO 

STO N SHO
Quick-Release Front License Plate Bracket
Booth #12575

Big Mike’s Performance Parts’ STO N SHO is a vehicle-specific Quick-Release Front License Plate Bracket. Now available for off-road vehicles, this new STO N SHO is designed for vehicles equipped with either a Roller or Hawse fairlead. An optional GoPro camera mount is also available to record all your off-road adventures. While this particular STO N SHO is designed for off-road vehicles, the STO N SHO is available for several makes and models.

PN: SNS138

Top Speed

Top Speed
Top Speed Titanium F430 Exhaust System
Booth #51103

Top Speed Full Titanium exhaust system for ’05–’09 Ferrari F430s. The entire system is hand-welded, back-purged, pie-cut, grade-5 titanium. This system features burnt-blue quad 102mm tips. Valves add the ability to route the exhaust through a set of resonators for a quieter tone or flow straight through for an aggressive tone, thus optimizing power.

Vöxx Wheels 

Vöxx Wheels
Turin SUV 6-Lug With Flip-Cap
Booth #46033

The new Vöxx Turin wheel is designed for SUV applications utilizing Vöxx’s unique flip-cap design that allows for multiple vehicle fitment. Available in 17-, 18- and 20-in. sizes for PCD 6x120 through 6x139.7 in.