Wed, 04/01/2009 - 10:07

SEMA News -- April 2009
BUSINESS

By Steve Campbell

SEMA News, April 2009, Making Green Cool

Illustration By Scott Waraniak

Driving Green, Connected, Safe and CoolNo industry is tied to technology like the automotive industry. Every part of virtually every business is affected by advances in materials, systems and technologies that make vehicles more personalized, more convenient and safer. Technology is the future of customization. Creativity and innovation must be championed, but the industry must also exhibit self-regulation to ensure that specialty-equipment technologies, accessories and modifications don’t create distractions within the vehicle while it helps drivers manage road and traffic conditions, keeps them informed and keeps them entertained.

John Waraniak, SEMA vice president of vehicle technology, has identified four megatrends driving technology and innovation in the original-equipment and specialty-equipment industries. These trends, combined with the technologies and processes for integrating them into today’s vehicles, as well as those being launched in the next few years, are creating new and exciting opportunities for the performance aftermarket.

Driving Green: MPH + MPGe
The move toward environmentally friendly and fuel-efficient transportation has been an undercurrent in the auto industry for decades, but it recently gained attention and popularity when petroleum-based product costs soared in the last few years. Even when fuel prices dropped in response to decreased demand, the die had been cast. The industry and consumers alike voiced renewed support for green systems and technologies, and specialty-equipment companies once again brought innovation and performance to the marketplace, as evidenced by the Making Green Cool Zone (MGCZ) and the Green Performance Technology Briefings at the 2008 SEMA Show. “The purpose of the MGCZ is to demonstrate that bringing more environmentally responsible vehicle technologies and products to the marketplace doesn’t mean that you have to sacrifice performance and the cool factor,” Waraniak said.

Among the presenters at the Green Performance Technical Briefing Seminar (TBS) was Jonathan Goodwin of H-Line Conversions. Goodwin, together with rock legend Neil Young, built a hybrid-electric biodiesel ’59 Lincoln. The pair wanted to show that existing vehicles could be built or retrofitted with aftermarket off-the-shelf components to deliver not only 500 hp of pure performance, but also achieve a 75-mile-per-gallon fuel efficiency in a 2-ton vehicle.

“This is technology that’s been around for 100 years,” Goodwin said. “The electric motor that we’re using to push the car down the road is made by UQM Technologies, and we have a set of batteries that run the electric motor. You don’t have to plug the vehicle into a house to charge the car; you have an onboard generator that kicks on so that you don’t have to stop to plug the
car in. We want to demonstrate and prove the concept that the things we’re doing and the things you’re seeing at the SEMA Show can be a reality within the next few years.”

A display by Electrojet Inc. also demonstrated the benefits of applying advanced aftermarket technology to systems and existing vehicles as well. Company founder Kyle Schwultz said that Electrojet produces low-cost electronic engine controls for applications including motorcycles, scooters and lawn mowers. The company developed a low-cost fuel-injection system that can be retrofitted to small engines, and the application can make a worldwide difference in emissions control.

“China and India combined make more than 30 million small engines, predominantly in motorcycles,” Schwultz said.

“For every mile driven, those motorcycles pollute more than four times the amounts of CO of any automotive car on the road in North America. The green and cool aspect is that the electronic controls we provide for these motorcycles reduce CO emissions by 65%–87%, NOx by 35% and hydrocarbons by more than 40%—all while also improving fuel economy by 15% and increasing acceleration, making more power and making the engines easier to start. It’s all about quality of life and having a little more performance, and our products are available at a very low incremental cost over the existing technology.”

SEMA News, April 2009, Making Green Cool, Nascar

Green has also come to NASCAR racing, albeit not yet in the competition field. A new 2010 Ford Fusion Hybrid was used as the official pace car of the championship weekend at the Homestead-Miami Speedway.
Photo Courtesy Autostock

The MGCZ also featured vehicles, products and information about a number of racing series that include alternative-fuel and zero-emissions performance technologies, such as the American Le Mans Series Green Challenge. Ed Triolo, the vice president of marketing for the American Le Mans Series, said that the inaugural Green Challenge at Road Atlanta race track on October 4, 2008, was won by General Motors’ Corvette Racing. The winning Corvette was powered by cellulosic E85R ethanol made from waste wood, and it achieved the best overall score in the competition based on performance, fuel efficiency and environmental impact.

Other exhibits featured the TTXGP race on the Isle of Man this June, which will showcase more than 52 zero-emissions motorcycle teams representing 20 countries’ racing bikes capable of reaching Grand Prix speeds; a Toyota Prius Hybrid with vertical doors, special paint and 24-inch wheels built by George Barris, the King of the Kustomizers; a vintage Toyota truck built by Seth Warren that has currently gone farther than any other vehicle in the world without petroleum—all the way from the northernmost part of Alaska to the southern tip of Argentina—using vegetable and animal oil for fuel; and Dino Fuel Alternatives’ self-contained, heated, fully automated fuel system that allows a diesel truck to run on B100, WVO, diesel or any mix thereof all the way down to 40 below zero.

“The key point is that we’re not making green cool,” said Waraniak, organizer of the MGCZ. “Green is already cool. We’re providing a platform for our members to showcase their products and innovations on a world stage and demonstrate that horsepower and green power can coexist.”

Driving Connected: Built-in, Brought-in or Beamed-in

Automotive technology has extended far beyond the car itself. In addition to features, functions and systems that are built into a vehicle, consumer devices, information and applications are also being brought in and beamed in to today’s vehicles. Ford’s Sync is one example of built-in, beamed-in and brought-in technology, in which the system offers not only voice-activated entertainment features and traffic information, but also immediate connection to emergency services and integration of Bluetooth and cell phone devices. GM’s OnStar navigation, vehicle diagnostic and emergency-services functions coupled with automatic crash-response offer another array of connected-vehicle technologies. Waraniak believes that systems such as these can offer more value to consumers when the vehicles are designed and engineered as open platforms and systems with future content, applications and upgrades in mind—including those from specialty-equipment manufacturers.

“With Sync, we are partners in the technology business,” said Derrick Kuzak, Ford’s group vice president of global product development. “We are not interested in developing our own proprietary or closed system. We want to work with technology companies for the good of our customers. That’s why we’ve created an open platform that accepts your hardware and software products and applications. Ultimately, Ford is striving to deliver technologies and applications to customers with speed, scale and affordability that no other automaker can touch.”

This type of thinking by vehicle manufacturers regarding flexible and open system platforms and architectures is the way forward, Waraniak said, noting that open architectures drive integration and integration drives innovation and growth.

“Open architectures, systems and platforms recognize that the most valuable application or service may not be apparent yet,” Waraniak explained. “It may not be created, or it may not even be thought of.”

Automakers have recognized that connected vehicles are a hit with consumers. Vehicles equipped with Sync sell twice as fast as those without, according to Tom Phillips, general manager of the automotive business unit for Microsoft, which developed the system for Ford.

“That’s a constant figure, even with the economic challenges of the industry through the last six months,” Phillips said. “That means a faster turnover for the dealer and Ford. It means a financial impact. Even more importantly, it means that the customers who buy them are satisfied; 80% of the people using Ford Sync are very satisfied with that level of functionality and would recommend it to a friend.”

Driving Safely: Cars That Don’t Crash

National crash statistics for 2006 indicated that 42,642 fatalities and 2,575,000 injuries resulted from 1,784,000 automobile accidents. Combined with the other 4,189,000 crashes that resulted in only property damage, the total cost was $230.5 billion. The U.S. Department of Transportation (USDOT) has established the goal of a 90% reduction in crashes by 2030, which would result in 383,778 saved lives and monetary savings of more than $2 trillion by 2040. USDOT recognizes that connected vehicles can help achieve those safety goals and that allowing innovation from specialty-equipment businesses can get there quicker and more efficiently.

“We have a broad challenge to really use innovation to make this happen,” said Tim Schmidt, chief technology officer of the USDOT at SEMA’s recent Connected Vehicle Technology Seminar. “We’ll worry about safety—that’s got to be the underlying current from the government—but we don’t want people to be restrained in their thinking.”

Using a wide variety of sensors and systems both onboard and in the roadside infrastructure and in traffic-control devices, vehicles can not only be guided away from collisions, but also receive signals that aid in fuel economy. For instance, if a vehicle is approaching a red light and the signal detects that there is no opposing traffic, it can be programmed to turn green, allowing the vehicle to continue without stopping and wasting fuel.

“Cars equipped with wireless technologies know in advance if the surface ahead is icy and can warn other cars,” said Kieran O’Sullivan, executive vice president of the interior division of Continental North America’s Global Connectivity Business Unit. “If an accident has happened around the curve ahead—even if it is out of view of the driver—the system will note that the lane is blocked. Vehicles can now warn the driver of potential hazards and accidents even though they’re not yet visible to the driver.”

SEMA News, April 2009, Making Green Cool, Technology

SEMA is working with several companies to develop Hardware-in-the-Loop (HIL) testing and simulation of aftermarket electronic stability control and modified vehicle dynamics performance. HIL testing effectively combines math model simulation (CarSim) with SEMA-member product data and plugs directly into a vehicle’s body and chassis electronic control modules. This dSpace HIL system (pictured) is utilizing CarSim RT with an ESC and Powertrain control module.

Several new technologies are being deployed in vehicles around the globe over the course of the next few years. Electronic stability control, the computerized system that improves the safety of a vehicle’s handling by detecting and preventing skids, was introduced more than a decade ago and is now mandated for all new vehicles. Some of the advanced systems seem like concepts from science fiction: night vision systems that make darkened surroundings visible hundreds of feet out; adaptive cruise control that uses radar or lasers to slow a vehicle when approaching another and accelerate again when traffic allows; roll stability control for detecting and the prevention of impending rollovers; lane departure warnings that alert the driver if the vehicle begins to move out of its lane; and blind-spot warnings that sense when another vehicle is in the driver’s blind spot. More than a dozen such safety systems are already in the product pipeline and will be available in real-world form in the near future.

“If you thought about only the OEMs and the Tier 1 suppliers installing these kinds of things and having them fully embedded in the vehicle, it would take 20 years to get to the level of penetration you need,” said Roger Berg, vice president of wireless at Denso. “But with a high level of cooperation and collaboration between the auto OEMs and the aftermarket, we can have this kind of technology developed and deployed. Ten years ago, the OEMs would say they didn’t want any aftermarket stuff in the car—and there are still some people who think that way—but collaboration can actually make some of these things work and move forward in establishing a pathway to achieve that 90% traffic fatality reduction.”

Driving Cool: Making It Mine

Open innovation and democratized technology will result in new levels of performance, personalization and customization previously undreamed of. Automakers are reducing the number of platforms produced and the complexity of vehicle builds, while simultaneously searching for ways to increase product differentiation to avoid cookie-cutter models. SEMA members can help provide cost-effective product differentiation and profitable personalization. In order for that to happen, however, automakers and original-equipment suppliers must design and manufacture their vehicles and systems with customization in mind. In the case of electronics, the architecture used must accommodate flexibility. For instance, the controller-area network (CAN) allows microcontrollers and devices to communicate with each other within a vehicle without a host computer, but many current automaker designs and architectures can lock out or make it very difficult for consumers to add new applications and innovations.

“The problem is that everything is intertwined on a CAN bus so that you’ve got safety messages that are intertwined with infotainment messages,” said Chris Cook, vice president of the OEM division at NAV-TV Corp. “We want to add an infotainment device, but we don’t want to interfere with anything in the safety side. So why can’t those be separated in the development cycle for the automakers so they can stay ahead in the design cycle of consumer electronics?

It needs to happen at the automaker level—a change in how the car is developed.”

Think of all the technologies that have entered the vehicle in just the past decade: Bluetooth; satellite radio; hi-def radio; backseat video; streaming audio; MP3 players; backseat gaming; GPS navigation; mobile Internet service; human-machine interfaces using voice commands; and information on traffic, weather, the closest gas station, restaurants and shopping. Who knows what cool, convenient, personalized revenue-generating application might be next?

“The trend is simple,” said Cook. “Consumers want more than automakers and suppliers are giving them, and the aftermarket has that ability to give them more when they want it, how they want it and where they want it and allow them to spend their money in the economy, which drives a lot of the innovations that you see the automakers bring into the car. Auto security, in-car video and rear-seat entertainment are products that were delivered in the aftermarket first and then were adopted into the vehicle very shortly afterward. In the aftermarket, in order for us to thrive and deliver to the consumer what they want when they want it and keep them in tune with the digital trends, we have to have the ability to communicate with the vehicle. We need the ability to be a partner with the automakers and the suppliers to deliver products that they may not intend to deliver to the consumer.”

SEMA Helps Members Leverage Vehicle Technology

SEMA is working to develop vehicle technology solutions and build relationships that foster collaboration between automakers, original-equipment suppliers, research organizations, industry associations and member companies. Programs, such as Measuring Sessions and Technology Transfer, provide specialty-equipment manufacturers with the means to introduce innovations at vehicle launch or even before. SEMA’s Vehicle Technology Briefing Seminars provide members with in-depth information from leading industry experts about advanced vehicle technologies and emerging systems to help them prepare for and leverage new business opportunities.

“The TBS program is designed to help our members understand what vehicle technologies and product development opportunities are coming down the road and support them in developing plans and solutions to address them,” said Waraniak. “The TBS program allows member companies to not only understand the basics of increasingly complex vehicle technologies and systems, but also evaluate the potential impact on their products and businesses as the specialty-equipment and performance industry continues to evolve.

Notice of future Measuring Sessions, information about additions to the Technology Transfer program and topics and dates of upcoming Vehicle Technology Briefing Seminars are published in SEMA News as well as SEMA eNews.

Wed, 04/01/2009 - 10:07

SEMA News -- April 2009
BUSINESS

By Steve Campbell

SEMA News, April 2009, Making Green Cool

Illustration By Scott Waraniak

Driving Green, Connected, Safe and CoolNo industry is tied to technology like the automotive industry. Every part of virtually every business is affected by advances in materials, systems and technologies that make vehicles more personalized, more convenient and safer. Technology is the future of customization. Creativity and innovation must be championed, but the industry must also exhibit self-regulation to ensure that specialty-equipment technologies, accessories and modifications don’t create distractions within the vehicle while it helps drivers manage road and traffic conditions, keeps them informed and keeps them entertained.

John Waraniak, SEMA vice president of vehicle technology, has identified four megatrends driving technology and innovation in the original-equipment and specialty-equipment industries. These trends, combined with the technologies and processes for integrating them into today’s vehicles, as well as those being launched in the next few years, are creating new and exciting opportunities for the performance aftermarket.

Driving Green: MPH + MPGe
The move toward environmentally friendly and fuel-efficient transportation has been an undercurrent in the auto industry for decades, but it recently gained attention and popularity when petroleum-based product costs soared in the last few years. Even when fuel prices dropped in response to decreased demand, the die had been cast. The industry and consumers alike voiced renewed support for green systems and technologies, and specialty-equipment companies once again brought innovation and performance to the marketplace, as evidenced by the Making Green Cool Zone (MGCZ) and the Green Performance Technology Briefings at the 2008 SEMA Show. “The purpose of the MGCZ is to demonstrate that bringing more environmentally responsible vehicle technologies and products to the marketplace doesn’t mean that you have to sacrifice performance and the cool factor,” Waraniak said.

Among the presenters at the Green Performance Technical Briefing Seminar (TBS) was Jonathan Goodwin of H-Line Conversions. Goodwin, together with rock legend Neil Young, built a hybrid-electric biodiesel ’59 Lincoln. The pair wanted to show that existing vehicles could be built or retrofitted with aftermarket off-the-shelf components to deliver not only 500 hp of pure performance, but also achieve a 75-mile-per-gallon fuel efficiency in a 2-ton vehicle.

“This is technology that’s been around for 100 years,” Goodwin said. “The electric motor that we’re using to push the car down the road is made by UQM Technologies, and we have a set of batteries that run the electric motor. You don’t have to plug the vehicle into a house to charge the car; you have an onboard generator that kicks on so that you don’t have to stop to plug the
car in. We want to demonstrate and prove the concept that the things we’re doing and the things you’re seeing at the SEMA Show can be a reality within the next few years.”

A display by Electrojet Inc. also demonstrated the benefits of applying advanced aftermarket technology to systems and existing vehicles as well. Company founder Kyle Schwultz said that Electrojet produces low-cost electronic engine controls for applications including motorcycles, scooters and lawn mowers. The company developed a low-cost fuel-injection system that can be retrofitted to small engines, and the application can make a worldwide difference in emissions control.

“China and India combined make more than 30 million small engines, predominantly in motorcycles,” Schwultz said.

“For every mile driven, those motorcycles pollute more than four times the amounts of CO of any automotive car on the road in North America. The green and cool aspect is that the electronic controls we provide for these motorcycles reduce CO emissions by 65%–87%, NOx by 35% and hydrocarbons by more than 40%—all while also improving fuel economy by 15% and increasing acceleration, making more power and making the engines easier to start. It’s all about quality of life and having a little more performance, and our products are available at a very low incremental cost over the existing technology.”

SEMA News, April 2009, Making Green Cool, Nascar

Green has also come to NASCAR racing, albeit not yet in the competition field. A new 2010 Ford Fusion Hybrid was used as the official pace car of the championship weekend at the Homestead-Miami Speedway.
Photo Courtesy Autostock

The MGCZ also featured vehicles, products and information about a number of racing series that include alternative-fuel and zero-emissions performance technologies, such as the American Le Mans Series Green Challenge. Ed Triolo, the vice president of marketing for the American Le Mans Series, said that the inaugural Green Challenge at Road Atlanta race track on October 4, 2008, was won by General Motors’ Corvette Racing. The winning Corvette was powered by cellulosic E85R ethanol made from waste wood, and it achieved the best overall score in the competition based on performance, fuel efficiency and environmental impact.

Other exhibits featured the TTXGP race on the Isle of Man this June, which will showcase more than 52 zero-emissions motorcycle teams representing 20 countries’ racing bikes capable of reaching Grand Prix speeds; a Toyota Prius Hybrid with vertical doors, special paint and 24-inch wheels built by George Barris, the King of the Kustomizers; a vintage Toyota truck built by Seth Warren that has currently gone farther than any other vehicle in the world without petroleum—all the way from the northernmost part of Alaska to the southern tip of Argentina—using vegetable and animal oil for fuel; and Dino Fuel Alternatives’ self-contained, heated, fully automated fuel system that allows a diesel truck to run on B100, WVO, diesel or any mix thereof all the way down to 40 below zero.

“The key point is that we’re not making green cool,” said Waraniak, organizer of the MGCZ. “Green is already cool. We’re providing a platform for our members to showcase their products and innovations on a world stage and demonstrate that horsepower and green power can coexist.”

Driving Connected: Built-in, Brought-in or Beamed-in

Automotive technology has extended far beyond the car itself. In addition to features, functions and systems that are built into a vehicle, consumer devices, information and applications are also being brought in and beamed in to today’s vehicles. Ford’s Sync is one example of built-in, beamed-in and brought-in technology, in which the system offers not only voice-activated entertainment features and traffic information, but also immediate connection to emergency services and integration of Bluetooth and cell phone devices. GM’s OnStar navigation, vehicle diagnostic and emergency-services functions coupled with automatic crash-response offer another array of connected-vehicle technologies. Waraniak believes that systems such as these can offer more value to consumers when the vehicles are designed and engineered as open platforms and systems with future content, applications and upgrades in mind—including those from specialty-equipment manufacturers.

“With Sync, we are partners in the technology business,” said Derrick Kuzak, Ford’s group vice president of global product development. “We are not interested in developing our own proprietary or closed system. We want to work with technology companies for the good of our customers. That’s why we’ve created an open platform that accepts your hardware and software products and applications. Ultimately, Ford is striving to deliver technologies and applications to customers with speed, scale and affordability that no other automaker can touch.”

This type of thinking by vehicle manufacturers regarding flexible and open system platforms and architectures is the way forward, Waraniak said, noting that open architectures drive integration and integration drives innovation and growth.

“Open architectures, systems and platforms recognize that the most valuable application or service may not be apparent yet,” Waraniak explained. “It may not be created, or it may not even be thought of.”

Automakers have recognized that connected vehicles are a hit with consumers. Vehicles equipped with Sync sell twice as fast as those without, according to Tom Phillips, general manager of the automotive business unit for Microsoft, which developed the system for Ford.

“That’s a constant figure, even with the economic challenges of the industry through the last six months,” Phillips said. “That means a faster turnover for the dealer and Ford. It means a financial impact. Even more importantly, it means that the customers who buy them are satisfied; 80% of the people using Ford Sync are very satisfied with that level of functionality and would recommend it to a friend.”

Driving Safely: Cars That Don’t Crash

National crash statistics for 2006 indicated that 42,642 fatalities and 2,575,000 injuries resulted from 1,784,000 automobile accidents. Combined with the other 4,189,000 crashes that resulted in only property damage, the total cost was $230.5 billion. The U.S. Department of Transportation (USDOT) has established the goal of a 90% reduction in crashes by 2030, which would result in 383,778 saved lives and monetary savings of more than $2 trillion by 2040. USDOT recognizes that connected vehicles can help achieve those safety goals and that allowing innovation from specialty-equipment businesses can get there quicker and more efficiently.

“We have a broad challenge to really use innovation to make this happen,” said Tim Schmidt, chief technology officer of the USDOT at SEMA’s recent Connected Vehicle Technology Seminar. “We’ll worry about safety—that’s got to be the underlying current from the government—but we don’t want people to be restrained in their thinking.”

Using a wide variety of sensors and systems both onboard and in the roadside infrastructure and in traffic-control devices, vehicles can not only be guided away from collisions, but also receive signals that aid in fuel economy. For instance, if a vehicle is approaching a red light and the signal detects that there is no opposing traffic, it can be programmed to turn green, allowing the vehicle to continue without stopping and wasting fuel.

“Cars equipped with wireless technologies know in advance if the surface ahead is icy and can warn other cars,” said Kieran O’Sullivan, executive vice president of the interior division of Continental North America’s Global Connectivity Business Unit. “If an accident has happened around the curve ahead—even if it is out of view of the driver—the system will note that the lane is blocked. Vehicles can now warn the driver of potential hazards and accidents even though they’re not yet visible to the driver.”

SEMA News, April 2009, Making Green Cool, Technology

SEMA is working with several companies to develop Hardware-in-the-Loop (HIL) testing and simulation of aftermarket electronic stability control and modified vehicle dynamics performance. HIL testing effectively combines math model simulation (CarSim) with SEMA-member product data and plugs directly into a vehicle’s body and chassis electronic control modules. This dSpace HIL system (pictured) is utilizing CarSim RT with an ESC and Powertrain control module.

Several new technologies are being deployed in vehicles around the globe over the course of the next few years. Electronic stability control, the computerized system that improves the safety of a vehicle’s handling by detecting and preventing skids, was introduced more than a decade ago and is now mandated for all new vehicles. Some of the advanced systems seem like concepts from science fiction: night vision systems that make darkened surroundings visible hundreds of feet out; adaptive cruise control that uses radar or lasers to slow a vehicle when approaching another and accelerate again when traffic allows; roll stability control for detecting and the prevention of impending rollovers; lane departure warnings that alert the driver if the vehicle begins to move out of its lane; and blind-spot warnings that sense when another vehicle is in the driver’s blind spot. More than a dozen such safety systems are already in the product pipeline and will be available in real-world form in the near future.

“If you thought about only the OEMs and the Tier 1 suppliers installing these kinds of things and having them fully embedded in the vehicle, it would take 20 years to get to the level of penetration you need,” said Roger Berg, vice president of wireless at Denso. “But with a high level of cooperation and collaboration between the auto OEMs and the aftermarket, we can have this kind of technology developed and deployed. Ten years ago, the OEMs would say they didn’t want any aftermarket stuff in the car—and there are still some people who think that way—but collaboration can actually make some of these things work and move forward in establishing a pathway to achieve that 90% traffic fatality reduction.”

Driving Cool: Making It Mine

Open innovation and democratized technology will result in new levels of performance, personalization and customization previously undreamed of. Automakers are reducing the number of platforms produced and the complexity of vehicle builds, while simultaneously searching for ways to increase product differentiation to avoid cookie-cutter models. SEMA members can help provide cost-effective product differentiation and profitable personalization. In order for that to happen, however, automakers and original-equipment suppliers must design and manufacture their vehicles and systems with customization in mind. In the case of electronics, the architecture used must accommodate flexibility. For instance, the controller-area network (CAN) allows microcontrollers and devices to communicate with each other within a vehicle without a host computer, but many current automaker designs and architectures can lock out or make it very difficult for consumers to add new applications and innovations.

“The problem is that everything is intertwined on a CAN bus so that you’ve got safety messages that are intertwined with infotainment messages,” said Chris Cook, vice president of the OEM division at NAV-TV Corp. “We want to add an infotainment device, but we don’t want to interfere with anything in the safety side. So why can’t those be separated in the development cycle for the automakers so they can stay ahead in the design cycle of consumer electronics?

It needs to happen at the automaker level—a change in how the car is developed.”

Think of all the technologies that have entered the vehicle in just the past decade: Bluetooth; satellite radio; hi-def radio; backseat video; streaming audio; MP3 players; backseat gaming; GPS navigation; mobile Internet service; human-machine interfaces using voice commands; and information on traffic, weather, the closest gas station, restaurants and shopping. Who knows what cool, convenient, personalized revenue-generating application might be next?

“The trend is simple,” said Cook. “Consumers want more than automakers and suppliers are giving them, and the aftermarket has that ability to give them more when they want it, how they want it and where they want it and allow them to spend their money in the economy, which drives a lot of the innovations that you see the automakers bring into the car. Auto security, in-car video and rear-seat entertainment are products that were delivered in the aftermarket first and then were adopted into the vehicle very shortly afterward. In the aftermarket, in order for us to thrive and deliver to the consumer what they want when they want it and keep them in tune with the digital trends, we have to have the ability to communicate with the vehicle. We need the ability to be a partner with the automakers and the suppliers to deliver products that they may not intend to deliver to the consumer.”

SEMA Helps Members Leverage Vehicle Technology

SEMA is working to develop vehicle technology solutions and build relationships that foster collaboration between automakers, original-equipment suppliers, research organizations, industry associations and member companies. Programs, such as Measuring Sessions and Technology Transfer, provide specialty-equipment manufacturers with the means to introduce innovations at vehicle launch or even before. SEMA’s Vehicle Technology Briefing Seminars provide members with in-depth information from leading industry experts about advanced vehicle technologies and emerging systems to help them prepare for and leverage new business opportunities.

“The TBS program is designed to help our members understand what vehicle technologies and product development opportunities are coming down the road and support them in developing plans and solutions to address them,” said Waraniak. “The TBS program allows member companies to not only understand the basics of increasingly complex vehicle technologies and systems, but also evaluate the potential impact on their products and businesses as the specialty-equipment and performance industry continues to evolve.

Notice of future Measuring Sessions, information about additions to the Technology Transfer program and topics and dates of upcoming Vehicle Technology Briefing Seminars are published in SEMA News as well as SEMA eNews.

Wed, 04/01/2009 - 10:01

SEMA News — April 2009

SEMA News-June 2009-Chris Kersting 

We all are working harder than ever at keeping businesses and the industry alive and moving forward. Your time is at a premium. SEMA knows this. Here are a handful of quick, easy-to-use silver bullets to help your company make progress. Take 60 seconds, and load up.

Recession Survival Series: SEMA now has available the first of a series of web-based seminars to provide immediate help to companies battling the economic downturn. The new program focuses on topics specific to today’s challenges, including managing cash flow, retaining the best employees, managing inventory and leading your company through 2009 into the new business environment. If you miss a live webinar, you can download it for viewing at your convenience. The Recession Survival Series webinars can be found at www.sema.org/survivalseries.

www.SEMA.org Website: Instant Access to Solutions: Regular visitors to our website, www.SEMA.org, may have already noticed the site now has easy-to-access market data, company listings, social-networking features and news feeds that are all designed to help our members get to the content and people that will help their businesses succeed. New technologies now enable us to channel relevant news, events, government affairs, education and research information to our members based on their job function, business type and geographic location. The goal is to direct the most relevant information to the right members at the right time. I encourage everyone who hasn’t been to the site recently to check it out and tell us what you think; we’ll be fine-tuning the effort in the coming months.

Custom Sales Training Video for the Specialty Retailer: In response to member feedback, SEMA has developed an online sales training course for retailers titled, “Focus on the Customer: Introduction to Selling.” This course is a practical and engaging tool for improving sales performance now, when you need it the most. Your sales staff will learn a proven five-step sales process that can help maximize sales success. The course is an excellent training opportunity for new sales people and a great refresher for your veterans; it’s available now, free of charge for SEMA members. The course is the first of many training and development offerings slated for your team as SEMA rolls out the new SEMA Education Institute online, available through www.sema.org/sei. Watch for more information as SEMA makes available top-quality training tools and courses as well as manufacturers’ product training on this new addition to the SEMA website.

SEMA News Online: Many readers may have noticed that SEMA launched an electronic edition of SEMA News magazine in February. The print version is delivered to 30,000 businesses around the world; this combined mix of print and electronic publications now reaches 200,000 readers. This is the first step in an association-wide redesign and integration of our communications efforts. We’re not looking to push information; we’re looking to connect.

Wed, 04/01/2009 - 10:01

SEMA News — April 2009

SEMA News-June 2009-Chris Kersting 

We all are working harder than ever at keeping businesses and the industry alive and moving forward. Your time is at a premium. SEMA knows this. Here are a handful of quick, easy-to-use silver bullets to help your company make progress. Take 60 seconds, and load up.

Recession Survival Series: SEMA now has available the first of a series of web-based seminars to provide immediate help to companies battling the economic downturn. The new program focuses on topics specific to today’s challenges, including managing cash flow, retaining the best employees, managing inventory and leading your company through 2009 into the new business environment. If you miss a live webinar, you can download it for viewing at your convenience. The Recession Survival Series webinars can be found at www.sema.org/survivalseries.

www.SEMA.org Website: Instant Access to Solutions: Regular visitors to our website, www.SEMA.org, may have already noticed the site now has easy-to-access market data, company listings, social-networking features and news feeds that are all designed to help our members get to the content and people that will help their businesses succeed. New technologies now enable us to channel relevant news, events, government affairs, education and research information to our members based on their job function, business type and geographic location. The goal is to direct the most relevant information to the right members at the right time. I encourage everyone who hasn’t been to the site recently to check it out and tell us what you think; we’ll be fine-tuning the effort in the coming months.

Custom Sales Training Video for the Specialty Retailer: In response to member feedback, SEMA has developed an online sales training course for retailers titled, “Focus on the Customer: Introduction to Selling.” This course is a practical and engaging tool for improving sales performance now, when you need it the most. Your sales staff will learn a proven five-step sales process that can help maximize sales success. The course is an excellent training opportunity for new sales people and a great refresher for your veterans; it’s available now, free of charge for SEMA members. The course is the first of many training and development offerings slated for your team as SEMA rolls out the new SEMA Education Institute online, available through www.sema.org/sei. Watch for more information as SEMA makes available top-quality training tools and courses as well as manufacturers’ product training on this new addition to the SEMA website.

SEMA News Online: Many readers may have noticed that SEMA launched an electronic edition of SEMA News magazine in February. The print version is delivered to 30,000 businesses around the world; this combined mix of print and electronic publications now reaches 200,000 readers. This is the first step in an association-wide redesign and integration of our communications efforts. We’re not looking to push information; we’re looking to connect.

Wed, 04/01/2009 - 09:09

SEMA News -- April 2009
NEW PRODUCTS

 

SEMA News, April 2009, New Products, Omix Ada, Wrangler Wheel

 
Omix-Ada/Rugged Ridge
17x9 Aluminum Wrangler Wheel

Omix-Ada/Rugged Ridge says its Wrangler Wheel represents one of the toughest designs in custom wheels. Hub-centric design centers the wheel, providing the best fit possible and proper clearance for rotors, steering components and the suspension.

Omix-Ada/Rugged Ridge
800/449-6649
http://www.omix-ada.com/

 SEMA News, April 2009, New Products, Extreme BiodieselExtreme Bio-Diesel
Extreme Green Machine

According to Extreme Bio-Diesel, its Extreme Green Machine is the first and only portable biodiesel processor that can produce biodiesel in less than five hours using all state-of-the-art technology for under $1 per gallon.

Extreme Bio-Diesel
888/998-7223
http://www.extremebiodiesel.com/

 SEMA News, April 2009, New Products, SuperwinchSuperwinch
Rock 95

A rock-crawling winch with synthetic rope, blue-anodized hawse and three mounting options. It fits between vehicle rails and is 45% lighter than most 9,000-pounders, according to the company.

Superwinch
860/928-7787
http://www.superwinch.com/
PN: 09532RK

 SEMA News, April 2009, New Products, Pareto Point IndustriesPareto Point Industries
LubriCube

A high-performance filter with an electric transfer pump and controller for transmissions, differentials or other filtration applications. Filter base element fitted with Neodymium magnets.

Pareto Point Industries
323/726-2199
http://www.paretopoint.com/
PN: LuCu1

SEMA News, April 2009, New Products, Con2rCon2r
Great Ball of Fire

According to Con2r, this one-of-a-kind limited-edition gearshift knob is the perfect final touch for any true hot rod. Assembled from four individually investment-cast brass pieces, it comes together with the flames wrapping up and around a completely hollow center to form a 2.25-in.-diameter ball of fire. Production has been limited to just 96 pieces to guarantee a unique look.

Con2r
503/626-6390
www.con2r.com

 SEMA News, April 2009, New Products, Diamond PistonsDiamond Pistons
New Nitrous Pistons

Introducing two new forged pistons for nitrous engines. One is designed for a 23-degree small-block Chevy; the other for a big-block Chevy 540–632ci (shown) with Ray Franks’ Profiler Hit-man
cylinder heads.

Diamond Pistons
877/552-2112
www.diamondracing.net  

 SEMA News, April 2009, New Products, Byers ProductsByers Products
Versa Lift

The push-button access to attic, mezzanine or loft storage that Versa Lift provides is revolutionizing how homeowners and garage-shop owners look at storage.

Byers Products
405/943-1468
www.bpghome.com

 SEMA News, April 2009, New Products, Roll N LockRoll-N-Lock Corp.
Hummer H3T Retractable Hard Tonneau

Roll-N-Lock now proudly offers its retractable hard tonneau cover for this new application. With the smallest housing dimension in the industry, the Roll-N- Lock design allows more room in tight, extra-short box areas, according to the company.

Roll-N-Lock Corp.
800/952-7655
www.rollnlock.com

 SEMA News, April 2009, New Products, Gold Eagle CompanyGold Eagle Co.
Improved Formula Sta-Bil

According to Gold Eagle Co., ethanol in gasoline attracts water from the air, which can cause corrosion damage to fuel tanks, fuel lines, carburetors and injectors. The improved Sta-Bil formula is designed to protect the fuel system from this corrosion.

Gold Eagle Co.
800/367-3245
www.goldeagle.com  

 

Wed, 04/01/2009 - 09:09

SEMA News -- April 2009
NEW PRODUCTS

 

SEMA News, April 2009, New Products, Omix Ada, Wrangler Wheel

 
Omix-Ada/Rugged Ridge
17x9 Aluminum Wrangler Wheel

Omix-Ada/Rugged Ridge says its Wrangler Wheel represents one of the toughest designs in custom wheels. Hub-centric design centers the wheel, providing the best fit possible and proper clearance for rotors, steering components and the suspension.

Omix-Ada/Rugged Ridge
800/449-6649
http://www.omix-ada.com/

 SEMA News, April 2009, New Products, Extreme BiodieselExtreme Bio-Diesel
Extreme Green Machine

According to Extreme Bio-Diesel, its Extreme Green Machine is the first and only portable biodiesel processor that can produce biodiesel in less than five hours using all state-of-the-art technology for under $1 per gallon.

Extreme Bio-Diesel
888/998-7223
http://www.extremebiodiesel.com/

 SEMA News, April 2009, New Products, SuperwinchSuperwinch
Rock 95

A rock-crawling winch with synthetic rope, blue-anodized hawse and three mounting options. It fits between vehicle rails and is 45% lighter than most 9,000-pounders, according to the company.

Superwinch
860/928-7787
http://www.superwinch.com/
PN: 09532RK

 SEMA News, April 2009, New Products, Pareto Point IndustriesPareto Point Industries
LubriCube

A high-performance filter with an electric transfer pump and controller for transmissions, differentials or other filtration applications. Filter base element fitted with Neodymium magnets.

Pareto Point Industries
323/726-2199
http://www.paretopoint.com/
PN: LuCu1

SEMA News, April 2009, New Products, Con2rCon2r
Great Ball of Fire

According to Con2r, this one-of-a-kind limited-edition gearshift knob is the perfect final touch for any true hot rod. Assembled from four individually investment-cast brass pieces, it comes together with the flames wrapping up and around a completely hollow center to form a 2.25-in.-diameter ball of fire. Production has been limited to just 96 pieces to guarantee a unique look.

Con2r
503/626-6390
www.con2r.com

 SEMA News, April 2009, New Products, Diamond PistonsDiamond Pistons
New Nitrous Pistons

Introducing two new forged pistons for nitrous engines. One is designed for a 23-degree small-block Chevy; the other for a big-block Chevy 540–632ci (shown) with Ray Franks’ Profiler Hit-man
cylinder heads.

Diamond Pistons
877/552-2112
www.diamondracing.net  

 SEMA News, April 2009, New Products, Byers ProductsByers Products
Versa Lift

The push-button access to attic, mezzanine or loft storage that Versa Lift provides is revolutionizing how homeowners and garage-shop owners look at storage.

Byers Products
405/943-1468
www.bpghome.com

 SEMA News, April 2009, New Products, Roll N LockRoll-N-Lock Corp.
Hummer H3T Retractable Hard Tonneau

Roll-N-Lock now proudly offers its retractable hard tonneau cover for this new application. With the smallest housing dimension in the industry, the Roll-N- Lock design allows more room in tight, extra-short box areas, according to the company.

Roll-N-Lock Corp.
800/952-7655
www.rollnlock.com

 SEMA News, April 2009, New Products, Gold Eagle CompanyGold Eagle Co.
Improved Formula Sta-Bil

According to Gold Eagle Co., ethanol in gasoline attracts water from the air, which can cause corrosion damage to fuel tanks, fuel lines, carburetors and injectors. The improved Sta-Bil formula is designed to protect the fuel system from this corrosion.

Gold Eagle Co.
800/367-3245
www.goldeagle.com  

 

Wed, 04/01/2009 - 06:44

The Specialty Equipment Market Association applauds efforts to help consumers, automakers and dealerships with a program to stimulate new car sales. We support the concept of government-issued vouchers toward the purchase of fuel-efficient new vehicles and allowing consumers to deduct the car interest payments on their taxes.

However, SEMA continues to oppose tying these vouchers to vehicle scrappage programs, known as "cash for clunkers." The programs accelerate the demise of older vehicles, which are then typically crushed into blocks of sheet metal. Scrappage programs focus on a car's age rather than how much it is driven or its actual emissions. SEMA has consistently warned against wasting taxpayer dollars on a program that may produce an artificial spike in sales, but does not reduce emissions or increase fuel efficiency.

Automakers and dealers need to sell cars in order to survive, but potential buyers have hit the brakes in these tough economic times. Scrappage programs actually would deny vouchers to the majority of people who may want to buy a new car but don't have an eligible older car to trade. Instead, these programs will be misused by those who own two or three older cars and seek to take advantage of the taxpayer give-away. Many of these cars aren't frequently driven, if at all, so destroying them will not clean the nation's air or make us less dependent on foreign oil.

While supporters tout a similar German program as evidence of success, the European Federation for Transport and the Environment, (the pan-European federation of environmental groups), has urged Germany and other countries to abandon scrappage subsidies because they do more environmental harm than good by artificially accelerating the car life cycle.

Scrappage programs hurt thousands of independent repair shops, auto restorers, customizers and their customers across the country. This industry provides thousands of American jobs and generates millions of dollars in local, state and federal tax revenues. We encourage the President to help the entire auto industry with programs that focus the incentive where it counts - on the purchase of new vehicles and not destroying older cars.

Read the latest developments on Cash for Clunkers legislation here.

Thu, 03/26/2009 - 12:18


Click on the logo to visit PRO's website.

PRO Open Meeting at SEMA Show 2008!

PRO will hold an open meeting during the 2008 SEMA Show in Las Vegas. The meeting is open to all PRO Council members, and will be in meeting rooms N219–N222, located in the North Hall of the Las Vegas Convention Center. Now more than ever, PRO needs input from all its members. So please plan to attend on Thursday morning at the Show, and bring all your ideas with you!

What: PRO Open Meeting
When: Thursday, November 6, 2008, 7:30 a.m.–9:30 a.m.
Where: Las Vegas Convention Center, North Hall, rooms N219–N222

PRO Column in SEMA Member News

Read PRO's column featured in the September/October issue of SEMA Member News by clicking here.

For information about PRO, contact Jim Skelly at jimsk@sema.org.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit ARMO's website.

 

ARMO Special Projects in Motion

Sponsorships are being accepted for the ARMO Industry Awards Reception. Now is the time to participate in this great opportunity to show your support of the restoration market, its community, its people and its businesses. Click here to download and print a sponsorship form.

For more information, contact any Select Committee member or Jan Desma, 909/396-0289, ext. 134, or e-mail jand@sema.org.

ARMO Column in SEMA Member News

Read ARMO's column featured in the September/October issue of SEMA Member News by clicking here.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit HRIA's website.

HRIA Special Projects in Motion

Sponsorships are being accepted for the HRIA Industry Awards Reception. Participate in this great opportunity to show your support of the hot-rod community, its people and its businesses. Click here to download and print a sponsorship form.

For more information contact any Select Committee member or Jan Desma, 909/396-0289 ext. 134 or e-mail jand@sema.org.

HRIA Column in SEMA Member News

Read HRIA's column featured in the September/October issue of SEMA Member News by clicking here.

For more information about HRIA, contact Jan Desma at jand@sema.org.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit TORA's website.

TORA Column in SEMA Member News

Read TORA's column featured in the September/October issue of SEMA Member News by clicking here.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit MPMC's website.

Auto Club Speedway of Southern California and SEMA’s Motorsports Parts Manufacturers Council Celebrate Motorsports Awareness Month with the Take a Friend to a Race Campaign

Auto Club Speedway has teamed up with the Motorsports Parts Manufacturers Council (MPMC), a council of the Specialty Equipment Market Association (SEMA), to celebrate Motorsports Awareness Month with the "Take a Friend to a Race" Campaign, a grassroots program aimed at increasing attendance at motorsports events by introducing new fans to the sport.

“We are very excited to be working with SEMA and the Motorsports Parts Manufacturers Council to get the word out about the great racing at Auto Club Speedway,” said Speedway President Gillian Zucker. “SEMA members’ love of cars and motorsports, combined with our great event schedule, means we are the perfect partners to promote motorsports awareness.”

SEMA PR Contact: Della Domingo, dellad@sema.org.

MPMC Column in SEMA Member News

Read MPMC's column featured in the September/October issue of SEMA Member News by clicking here.

For information about MPMC, contact Jim Skelly at jimsk@sema.org.

-------------------------------------------------------------------------------------------------------------------


Click on the logo to visit MRC's website.

MRC Column in SEMA Member News

Read MRC's column featured in the September/October issue of SEMA Member News by clicking here.

For information about MRC, contact Staci Bostock at stacib@sema.org.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit SPC's website.

SPC Column in SEMA Member News

Read SPC's column featured in the September/October issue of SEMA Member News by clicking here.

For information about SPC, contact Paul Moritz at paulm@sema.org.

-----------------------------------------------------------------------------------------------------------------


Click on the logo to visit WTC's website.

WTC Column in SEMA Member News

Read WTC's column featured in the September/October issue of SEMA Member News by clicking here.

For information about WTC, contact Paul Moritz at paulm@sema.org.

-----------------------------------------------------------------------------------------------------------------


Click on the logo to visit SBN's website.

Be a part of what some have called “The Most Productive Event at the SEMA Show.”
Get your company more exposure today by sponsoring the SEMA Speed Networking Breakfast—Powered by SBN.

Sponsorship includes many exciting benefits:

  • Breakfast tickets (additional available at $10 each)
  • Scholarship fund donation
  • Eligibility to place items in goody bags that will be distributed to all breakfast attendees
  • Logo in the event’s looping PowerPoint presentation
  • Small logo on advance promotional material and on-site handouts
  • Thank-you recognition at event
  • Recognition in applicable SBN news vehicles—electronic and print—prior to and after the event
  • Company name linked to your corporate website on breakfast webpage
  • Handout of pre-registered attendees

Come join us for the breakfast, see the Woman of The Year and Athena Awards—and stay for Speed Networking—all while supporting the worthy cause of the SEMA Memorial Scholarship Fund.

Sponsor companies need not be SBN members. All SEMA-member companies are eligible.

Click here to download the sponsorship form.

Sponsorship deadline: Friday September 26, 2008

Attendee breakfast tickets can also be purchased by clicking here.

Discover the SEMA Mentoring Program—Powered by the SBN

“I’ll get by with a little help from my friends…” - Joe Cocker

Everyone needs help or expert advice from time to time, and SEMA’s Mentoring Program is an excellent resource to get answers to all your questions. Whether you need to know more about SEMA, market information for a start-up company or advice on how to approach your boss about a new position, the SEMA Mentoring Program can help.

“Ask A Mentor” is perfect for one-time questions. You can expect multiple SEMA mentors to provide online guidance and answers to your industry-related questions.

Short-term Assistance/Guidance is for help with a specific project or task. A SEMA council/committee mentor with the expertise you seek will be paired up with you to provide guidance with your project.

Long-term Relationship is helpful for developing your professional career. In this program segment you will be paired with a SEMA council/committee mentor who will provide guidance and assistance for ongoing career development or a long-term project.

So whether you just need an answer to a question or you want to cultivate a mentoring friendship, the SEMA Mentoring Program—Powered by the SBN is available to help. After all, we can all use a little help from our friends.

For more information on the program, click here.

SEMA Speed Networking Breakfast—Powered by SBN

Check out this video of SBN members in action during the valuable SEMA Speed Networking Breakfast—Powered by SBN held annually at the SEMA Show. Check out the video by clicking here

SBN Column in SEMA Member News

Read SBN's column featured in the September/October issue of SEMA Member News by clicking here.

For information about SBN, contact Jan Desma at jand@sema.org.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit YEN's website.

Join YEN

Did you know that the SEMA Young Executives Network has more than 500 members networking in the industry and is the largest SEMA committee? If you are employed by a SEMA-member company and are under the age of 39, then you can join the SEMA Young Executives Network for FREE. If you are interested in becoming part of the team, please visit our website at www.sema.org/yen.

YEN Member of the Month Spotlight

Did you know that YEN has a Member of the Month Spotlight on the SEMA website and that anyone can be nominated? To view previous selections or to make a nomination, visit www.sema.org/yen.

Discover The SEMA Mentoring Program—Powered by the SBN

“I’ll get by with a little help from my friends…” - Joe Cocker

Everyone needs help or expert advice from time to time, and SEMA’s Mentoring Program is an excellent resource to get answers to all your questions. Whether you need to know more about SEMA, market information for a start-up company or advice on how to approach your boss about a new position, the SEMA Mentoring Program can help.

“Ask A Mentor” is perfect for one-time questions. You can expect multiple SEMA mentors to provide online guidance and answers to your industry-related questions.

Short-term Assistance/Guidance is for help with a specific project or task. A SEMA council/committee mentor with the expertise you seek will be paired up with you to provide guidance with your project.

Long-term Relationship is helpful for developing your professional career. In this program segment you will be paired with a SEMA council/committee mentor who will provide guidance and assistance for ongoing career development or a long-term project.

So whether you just need an answer to a question or you want to cultivate a mentoring friendship, the SEMA Mentoring Program—Powered by the SBN is available to help. After all, we can all use a little help from our friends.

For more information on the program, click here.

YEN Column in SEMA Member News

Read YEN's column featured in the September/October issue of SEMA Member News by clicking here.

For information about YEN, contact Paul Moritz at paulm@sema.org.

Thu, 03/26/2009 - 12:18


Click on the logo to visit PRO's website.

PRO Open Meeting at SEMA Show 2008!

PRO will hold an open meeting during the 2008 SEMA Show in Las Vegas. The meeting is open to all PRO Council members, and will be in meeting rooms N219–N222, located in the North Hall of the Las Vegas Convention Center. Now more than ever, PRO needs input from all its members. So please plan to attend on Thursday morning at the Show, and bring all your ideas with you!

What: PRO Open Meeting
When: Thursday, November 6, 2008, 7:30 a.m.–9:30 a.m.
Where: Las Vegas Convention Center, North Hall, rooms N219–N222

PRO Column in SEMA Member News

Read PRO's column featured in the September/October issue of SEMA Member News by clicking here.

For information about PRO, contact Jim Skelly at jimsk@sema.org.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit ARMO's website.

 

ARMO Special Projects in Motion

Sponsorships are being accepted for the ARMO Industry Awards Reception. Now is the time to participate in this great opportunity to show your support of the restoration market, its community, its people and its businesses. Click here to download and print a sponsorship form.

For more information, contact any Select Committee member or Jan Desma, 909/396-0289, ext. 134, or e-mail jand@sema.org.

ARMO Column in SEMA Member News

Read ARMO's column featured in the September/October issue of SEMA Member News by clicking here.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit HRIA's website.

HRIA Special Projects in Motion

Sponsorships are being accepted for the HRIA Industry Awards Reception. Participate in this great opportunity to show your support of the hot-rod community, its people and its businesses. Click here to download and print a sponsorship form.

For more information contact any Select Committee member or Jan Desma, 909/396-0289 ext. 134 or e-mail jand@sema.org.

HRIA Column in SEMA Member News

Read HRIA's column featured in the September/October issue of SEMA Member News by clicking here.

For more information about HRIA, contact Jan Desma at jand@sema.org.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit TORA's website.

TORA Column in SEMA Member News

Read TORA's column featured in the September/October issue of SEMA Member News by clicking here.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit MPMC's website.

Auto Club Speedway of Southern California and SEMA’s Motorsports Parts Manufacturers Council Celebrate Motorsports Awareness Month with the Take a Friend to a Race Campaign

Auto Club Speedway has teamed up with the Motorsports Parts Manufacturers Council (MPMC), a council of the Specialty Equipment Market Association (SEMA), to celebrate Motorsports Awareness Month with the "Take a Friend to a Race" Campaign, a grassroots program aimed at increasing attendance at motorsports events by introducing new fans to the sport.

“We are very excited to be working with SEMA and the Motorsports Parts Manufacturers Council to get the word out about the great racing at Auto Club Speedway,” said Speedway President Gillian Zucker. “SEMA members’ love of cars and motorsports, combined with our great event schedule, means we are the perfect partners to promote motorsports awareness.”

SEMA PR Contact: Della Domingo, dellad@sema.org.

MPMC Column in SEMA Member News

Read MPMC's column featured in the September/October issue of SEMA Member News by clicking here.

For information about MPMC, contact Jim Skelly at jimsk@sema.org.

-------------------------------------------------------------------------------------------------------------------


Click on the logo to visit MRC's website.

MRC Column in SEMA Member News

Read MRC's column featured in the September/October issue of SEMA Member News by clicking here.

For information about MRC, contact Staci Bostock at stacib@sema.org.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit SPC's website.

SPC Column in SEMA Member News

Read SPC's column featured in the September/October issue of SEMA Member News by clicking here.

For information about SPC, contact Paul Moritz at paulm@sema.org.

-----------------------------------------------------------------------------------------------------------------


Click on the logo to visit WTC's website.

WTC Column in SEMA Member News

Read WTC's column featured in the September/October issue of SEMA Member News by clicking here.

For information about WTC, contact Paul Moritz at paulm@sema.org.

-----------------------------------------------------------------------------------------------------------------


Click on the logo to visit SBN's website.

Be a part of what some have called “The Most Productive Event at the SEMA Show.”
Get your company more exposure today by sponsoring the SEMA Speed Networking Breakfast—Powered by SBN.

Sponsorship includes many exciting benefits:

  • Breakfast tickets (additional available at $10 each)
  • Scholarship fund donation
  • Eligibility to place items in goody bags that will be distributed to all breakfast attendees
  • Logo in the event’s looping PowerPoint presentation
  • Small logo on advance promotional material and on-site handouts
  • Thank-you recognition at event
  • Recognition in applicable SBN news vehicles—electronic and print—prior to and after the event
  • Company name linked to your corporate website on breakfast webpage
  • Handout of pre-registered attendees

Come join us for the breakfast, see the Woman of The Year and Athena Awards—and stay for Speed Networking—all while supporting the worthy cause of the SEMA Memorial Scholarship Fund.

Sponsor companies need not be SBN members. All SEMA-member companies are eligible.

Click here to download the sponsorship form.

Sponsorship deadline: Friday September 26, 2008

Attendee breakfast tickets can also be purchased by clicking here.

Discover the SEMA Mentoring Program—Powered by the SBN

“I’ll get by with a little help from my friends…” - Joe Cocker

Everyone needs help or expert advice from time to time, and SEMA’s Mentoring Program is an excellent resource to get answers to all your questions. Whether you need to know more about SEMA, market information for a start-up company or advice on how to approach your boss about a new position, the SEMA Mentoring Program can help.

“Ask A Mentor” is perfect for one-time questions. You can expect multiple SEMA mentors to provide online guidance and answers to your industry-related questions.

Short-term Assistance/Guidance is for help with a specific project or task. A SEMA council/committee mentor with the expertise you seek will be paired up with you to provide guidance with your project.

Long-term Relationship is helpful for developing your professional career. In this program segment you will be paired with a SEMA council/committee mentor who will provide guidance and assistance for ongoing career development or a long-term project.

So whether you just need an answer to a question or you want to cultivate a mentoring friendship, the SEMA Mentoring Program—Powered by the SBN is available to help. After all, we can all use a little help from our friends.

For more information on the program, click here.

SEMA Speed Networking Breakfast—Powered by SBN

Check out this video of SBN members in action during the valuable SEMA Speed Networking Breakfast—Powered by SBN held annually at the SEMA Show. Check out the video by clicking here

SBN Column in SEMA Member News

Read SBN's column featured in the September/October issue of SEMA Member News by clicking here.

For information about SBN, contact Jan Desma at jand@sema.org.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit YEN's website.

Join YEN

Did you know that the SEMA Young Executives Network has more than 500 members networking in the industry and is the largest SEMA committee? If you are employed by a SEMA-member company and are under the age of 39, then you can join the SEMA Young Executives Network for FREE. If you are interested in becoming part of the team, please visit our website at www.sema.org/yen.

YEN Member of the Month Spotlight

Did you know that YEN has a Member of the Month Spotlight on the SEMA website and that anyone can be nominated? To view previous selections or to make a nomination, visit www.sema.org/yen.

Discover The SEMA Mentoring Program—Powered by the SBN

“I’ll get by with a little help from my friends…” - Joe Cocker

Everyone needs help or expert advice from time to time, and SEMA’s Mentoring Program is an excellent resource to get answers to all your questions. Whether you need to know more about SEMA, market information for a start-up company or advice on how to approach your boss about a new position, the SEMA Mentoring Program can help.

“Ask A Mentor” is perfect for one-time questions. You can expect multiple SEMA mentors to provide online guidance and answers to your industry-related questions.

Short-term Assistance/Guidance is for help with a specific project or task. A SEMA council/committee mentor with the expertise you seek will be paired up with you to provide guidance with your project.

Long-term Relationship is helpful for developing your professional career. In this program segment you will be paired with a SEMA council/committee mentor who will provide guidance and assistance for ongoing career development or a long-term project.

So whether you just need an answer to a question or you want to cultivate a mentoring friendship, the SEMA Mentoring Program—Powered by the SBN is available to help. After all, we can all use a little help from our friends.

For more information on the program, click here.

YEN Column in SEMA Member News

Read YEN's column featured in the September/October issue of SEMA Member News by clicking here.

For information about YEN, contact Paul Moritz at paulm@sema.org.

Thu, 03/26/2009 - 12:18


Click on the logo to visit PRO's website.

PRO Open Meeting at SEMA Show 2008!

PRO will hold an open meeting during the 2008 SEMA Show in Las Vegas. The meeting is open to all PRO Council members, and will be in meeting rooms N219–N222, located in the North Hall of the Las Vegas Convention Center. Now more than ever, PRO needs input from all its members. So please plan to attend on Thursday morning at the Show, and bring all your ideas with you!

What: PRO Open Meeting
When: Thursday, November 6, 2008, 7:30 a.m.–9:30 a.m.
Where: Las Vegas Convention Center, North Hall, rooms N219–N222

PRO Column in SEMA Member News

Read PRO's column featured in the September/October issue of SEMA Member News by clicking here.

For information about PRO, contact Jim Skelly at jimsk@sema.org.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit ARMO's website.

 

ARMO Special Projects in Motion

Sponsorships are being accepted for the ARMO Industry Awards Reception. Now is the time to participate in this great opportunity to show your support of the restoration market, its community, its people and its businesses. Click here to download and print a sponsorship form.

For more information, contact any Select Committee member or Jan Desma, 909/396-0289, ext. 134, or e-mail jand@sema.org.

ARMO Column in SEMA Member News

Read ARMO's column featured in the September/October issue of SEMA Member News by clicking here.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit HRIA's website.

HRIA Special Projects in Motion

Sponsorships are being accepted for the HRIA Industry Awards Reception. Participate in this great opportunity to show your support of the hot-rod community, its people and its businesses. Click here to download and print a sponsorship form.

For more information contact any Select Committee member or Jan Desma, 909/396-0289 ext. 134 or e-mail jand@sema.org.

HRIA Column in SEMA Member News

Read HRIA's column featured in the September/October issue of SEMA Member News by clicking here.

For more information about HRIA, contact Jan Desma at jand@sema.org.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit TORA's website.

TORA Column in SEMA Member News

Read TORA's column featured in the September/October issue of SEMA Member News by clicking here.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit MPMC's website.

Auto Club Speedway of Southern California and SEMA’s Motorsports Parts Manufacturers Council Celebrate Motorsports Awareness Month with the Take a Friend to a Race Campaign

Auto Club Speedway has teamed up with the Motorsports Parts Manufacturers Council (MPMC), a council of the Specialty Equipment Market Association (SEMA), to celebrate Motorsports Awareness Month with the "Take a Friend to a Race" Campaign, a grassroots program aimed at increasing attendance at motorsports events by introducing new fans to the sport.

“We are very excited to be working with SEMA and the Motorsports Parts Manufacturers Council to get the word out about the great racing at Auto Club Speedway,” said Speedway President Gillian Zucker. “SEMA members’ love of cars and motorsports, combined with our great event schedule, means we are the perfect partners to promote motorsports awareness.”

SEMA PR Contact: Della Domingo, dellad@sema.org.

MPMC Column in SEMA Member News

Read MPMC's column featured in the September/October issue of SEMA Member News by clicking here.

For information about MPMC, contact Jim Skelly at jimsk@sema.org.

-------------------------------------------------------------------------------------------------------------------


Click on the logo to visit MRC's website.

MRC Column in SEMA Member News

Read MRC's column featured in the September/October issue of SEMA Member News by clicking here.

For information about MRC, contact Staci Bostock at stacib@sema.org.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit SPC's website.

SPC Column in SEMA Member News

Read SPC's column featured in the September/October issue of SEMA Member News by clicking here.

For information about SPC, contact Paul Moritz at paulm@sema.org.

-----------------------------------------------------------------------------------------------------------------


Click on the logo to visit WTC's website.

WTC Column in SEMA Member News

Read WTC's column featured in the September/October issue of SEMA Member News by clicking here.

For information about WTC, contact Paul Moritz at paulm@sema.org.

-----------------------------------------------------------------------------------------------------------------


Click on the logo to visit SBN's website.

Be a part of what some have called “The Most Productive Event at the SEMA Show.”
Get your company more exposure today by sponsoring the SEMA Speed Networking Breakfast—Powered by SBN.

Sponsorship includes many exciting benefits:

  • Breakfast tickets (additional available at $10 each)
  • Scholarship fund donation
  • Eligibility to place items in goody bags that will be distributed to all breakfast attendees
  • Logo in the event’s looping PowerPoint presentation
  • Small logo on advance promotional material and on-site handouts
  • Thank-you recognition at event
  • Recognition in applicable SBN news vehicles—electronic and print—prior to and after the event
  • Company name linked to your corporate website on breakfast webpage
  • Handout of pre-registered attendees

Come join us for the breakfast, see the Woman of The Year and Athena Awards—and stay for Speed Networking—all while supporting the worthy cause of the SEMA Memorial Scholarship Fund.

Sponsor companies need not be SBN members. All SEMA-member companies are eligible.

Click here to download the sponsorship form.

Sponsorship deadline: Friday September 26, 2008

Attendee breakfast tickets can also be purchased by clicking here.

Discover the SEMA Mentoring Program—Powered by the SBN

“I’ll get by with a little help from my friends…” - Joe Cocker

Everyone needs help or expert advice from time to time, and SEMA’s Mentoring Program is an excellent resource to get answers to all your questions. Whether you need to know more about SEMA, market information for a start-up company or advice on how to approach your boss about a new position, the SEMA Mentoring Program can help.

“Ask A Mentor” is perfect for one-time questions. You can expect multiple SEMA mentors to provide online guidance and answers to your industry-related questions.

Short-term Assistance/Guidance is for help with a specific project or task. A SEMA council/committee mentor with the expertise you seek will be paired up with you to provide guidance with your project.

Long-term Relationship is helpful for developing your professional career. In this program segment you will be paired with a SEMA council/committee mentor who will provide guidance and assistance for ongoing career development or a long-term project.

So whether you just need an answer to a question or you want to cultivate a mentoring friendship, the SEMA Mentoring Program—Powered by the SBN is available to help. After all, we can all use a little help from our friends.

For more information on the program, click here.

SEMA Speed Networking Breakfast—Powered by SBN

Check out this video of SBN members in action during the valuable SEMA Speed Networking Breakfast—Powered by SBN held annually at the SEMA Show. Check out the video by clicking here

SBN Column in SEMA Member News

Read SBN's column featured in the September/October issue of SEMA Member News by clicking here.

For information about SBN, contact Jan Desma at jand@sema.org.

------------------------------------------------------------------------------------------------------------------


Click on the logo to visit YEN's website.

Join YEN

Did you know that the SEMA Young Executives Network has more than 500 members networking in the industry and is the largest SEMA committee? If you are employed by a SEMA-member company and are under the age of 39, then you can join the SEMA Young Executives Network for FREE. If you are interested in becoming part of the team, please visit our website at www.sema.org/yen.

YEN Member of the Month Spotlight

Did you know that YEN has a Member of the Month Spotlight on the SEMA website and that anyone can be nominated? To view previous selections or to make a nomination, visit www.sema.org/yen.

Discover The SEMA Mentoring Program—Powered by the SBN

“I’ll get by with a little help from my friends…” - Joe Cocker

Everyone needs help or expert advice from time to time, and SEMA’s Mentoring Program is an excellent resource to get answers to all your questions. Whether you need to know more about SEMA, market information for a start-up company or advice on how to approach your boss about a new position, the SEMA Mentoring Program can help.

“Ask A Mentor” is perfect for one-time questions. You can expect multiple SEMA mentors to provide online guidance and answers to your industry-related questions.

Short-term Assistance/Guidance is for help with a specific project or task. A SEMA council/committee mentor with the expertise you seek will be paired up with you to provide guidance with your project.

Long-term Relationship is helpful for developing your professional career. In this program segment you will be paired with a SEMA council/committee mentor who will provide guidance and assistance for ongoing career development or a long-term project.

So whether you just need an answer to a question or you want to cultivate a mentoring friendship, the SEMA Mentoring Program—Powered by the SBN is available to help. After all, we can all use a little help from our friends.

For more information on the program, click here.

YEN Column in SEMA Member News

Read YEN's column featured in the September/October issue of SEMA Member News by clicking here.

For information about YEN, contact Paul Moritz at paulm@sema.org.