Wed, 04/01/2009 - 15:36

SEMA News -- April 2009
LEGISLATIVE AND TECHNICAL AFFAIRS

automotive legislation, federal regulation aftermarket parts, aftermarket parts regulation - SEMA News, April 2009Law and Order is an update of some of the most recent federal and state legislative and regulatory issues that could potentially impact the automotive specialty-equipment industry. These include issues affecting small-business owners and their employees.

Massachusetts

Street Rods/Custom Vehicles: Governor Deval Patrick “pocket vetoed” SEMA-model legislation to create a vehicle registration classification for street rods and custom vehicles after he failed to sign the bill within 10 days of receiving it. SEMA has pledged to work to resolve concerns raised by the governor and his administration so that the bill may be revived in 2009. The Massachusetts bill defined a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured after 1948. The bill allowed kit cars and replica vehicles to be assigned certificates of title bearing the same model-year designations as the production vehicles they most closely resemble.

Montana

Exhaust Noise: Montana legislation to repeal a SEMA-sponsored law enacted in 2007 that permits vehicles with modified exhaust systems that do not emit an excess of 95 decibels was tabled in committee. Under the repeal legislation, all exhaust system modifications that are subjectively determined to increase noise would have been illegal. Similar legislation to restrict exhaust system noise has been introduced this year in Connecticut and New Jersey. The Montana bill is effectively dead for the year.

New York

Tire Efficiency: Legislation that seeks to require the development of a statewide program to mandate that replacement tires for passenger cars and light trucks be as energy efficient as tires sold as original equipment was reintroduced in the New York State Legislature. SEMA has defeated previous versions of this bill. While the measure contains a SEMA-drafted exemption for some hobbyist tires, including limited-production and off-road tires, SEMA has consistently recommended that the bill be rejected, since the replacement-tire efficiency program conflicts with federal law by regulating fuel economy, imposes substantial redesign costs on tire manufacturers, competes with federal consumer information requirements and essentially sets a 50-state standard.

Oregon

Aftermarket Parts: The Oregon House Environment and Water Committee will consider SEMA-opposed legislation to prohibit the sale and distribution of aftermarket motor vehicle parts if alternatives are available that “decrease greenhouse gas emissions from motor vehicles.” The bill is primarily focused on aftermarket tires and would authorize the Environmental Quality Commission to implement enforcement regulations, likely based on a rolling-resistance calculation. The bill was introduced at the request of Governor Theodore Kulongoski.

Texas

Nitrous Oxide: Texas has introduced SEMA-model legislation to allow for nitrous-oxide systems on motor vehicles. The bill allows the system if the vehicle is en route to or from a track, the device is inoperative or the container has been removed from the vehicle.

Virginia

Inoperable Vehicles: The sponsor for SEMA-opposed legislation to allow the city of Newport News to adopt a more restrictive inoperable vehicle ordinance has withdrawn the bill from consideration by the Virginia Legislature. Under the bill, the city could have adopted an ordinance prohibiting any person from keeping more than one inoperable motor vehicle on private property except within a fully enclosed building. Further, the bill required that the one vehicle now be shielded from view by the “installation of an opaque fence.” In 2004, Virginia signed into law a SEMA-negotiated bill to exempt at least two inoperable vehicles being actively repaired or restored on private property from any local ordinance if shielded or screened from public view. The law defines “shielded or screened from view” as not visible by someone standing at ground level from outside of the property on which the inoperable vehicles are located. This measure would have changed the rules of this fairly negotiated compromise.

Wyoming

Rods/Custom Vehicles: SEMA-model legislation to create a vehicle registration and titling class for street rods and custom vehicles was approved by the Wyoming House and awaits final passage by the Wyoming Senate before being sent to the governor for his signature. The measure defines a street rod as an altered vehicle manufactured before 1949 and a custom as an altered vehicle at least 25 years old and manufactured after 1948. The bill allows kit cars and replica vehicles to be assigned certificates of title bearing the same model-year designations as the production vehicles they most closely resemble.

STATE UPDATE

State Automotive Enthusiast Leadership Caucus: Two members of the State Automotive Enthusiast Leadership Caucus won seats in the U.S. Congress. Former State Senators Tom McClintock and Bill Posey were sworn into the 111th Congress in January. No stranger to SEMA members in California, Tom McClintock has been a long-time supporter of the automotive hobby in the California State Legislature. In 2004, he worked tirelessly against the repeal of the 30-year rolling emissions exemption in the state. An avid enthusiast, Bill Posey introduced and worked to enact into law the SEMA Street Rod/Custom Vehicle bill in Florida. In addition, fellow caucus members Johnny Key of Arkansas, Bob Huff of California, David Parks of Nevada and Daylin Leach of Pennsylvania were successful in their campaigns to move from the House to the Senate in their respective legislatures. Founded in 2005 and supported by SEMA, the caucus is a nonpartisan group of approximately 350 state legislators whose common thread is a love and appreciation for automobiles. Working with the state legislatures in recent years, SEMA has sought legislation to overhaul existing statutes and create brand-new programs to safeguard and expand the automotive hobby. These efforts have brought a series of significant legislative and regulatory accomplishments for the specialty-equipment industry on issues ranging from equipment standards and registration classifications to emissions test policies and hobbyist rights.

FEDERAL UPDATE

Vehicle Scrappage Programs: SEMA is opposing efforts in Congress to provide federal funds for a “Cash for Clunkers” program. The program accelerates the normal retirement of vehicles through the purchase of older cars that are then Law and Order, Scrappagetypically crushed into blocks of scrap metal. As a consequence, the vehicle hobby loses potential collector cars and parts forever. In early 2009, thousands of SEMA members and motor-vehicle enthusiasts responded to a call for action urging lawmakers to reject the program as part of the economic stimulus bill passed into law in February. The effort was a success. Both the House and Senate rejected inclusion of vehicle scrappage. Two proposals were put forth during the debate. The first was an $8 billion program targeting SUVs and pickups of any year that make less than 18 mpg. The second would have provided $16 billion worth of cash vouchers to individuals making less than $50,000 a year ($75,000 for families) who allowed their turned-in cars to be destroyed. The two Cash for Clunker proposals may reemerge later this year, so SEMA will remain vigilant in educating legislators on the need to oppose programs that do not spur car sales, reduce emissions or raise fuel economy. The economic stimulus bill included a SEMA-supported amendment allowing taxpayers to claim a tax deduction for state and local sales and excise taxes when they buy a new car in 2009.

Greenhouse Gases: The U.S. Environmental Protection Agency (EPA) is reconsidering its decision to deny California and 13 other states from regulating greenhouse gases emitted from motor vehicles. The EPA had cited a 2007 law raising the Corporate Average Fuel Economy (CAFE) standards as justification for denying the waiver request to regulate carbon dioxide (CO2) emissions starting in 2009. The EPA ruled that the new CAFE law will produce greater CO2 savings than the California program and that a federal approach provides a national solution, as opposed to a potential patchwork of state rules. SEMA has joined with the automakers in support of a national approach to greenhouse gases, contending that the California rule is actually a fuel-economy regulation. Only the federal government can establish fuel standards. The EPA will review public comments before making a decision on the waiver later this year.

Early-Warning Rule: The National Highway Traffic Safety Administration (NHTSA) has proposed increasing the reporting threshold under the early-warning rules, but the changes should have no impact on most manufacturers of specialty equipment. Under the current rules, all vehicle and equipment manufacturers must provide the NHTSA with notice of fatalities that are alleged or proven to be the result of product defects. Furthermore, large-volume vehicle manufacturers (more than 500 vehicles annually), large-volume tire manufacturers (more than 15,000 tires of the same size and design annually) and child restraint-system manufacturers must supply the NHTSA with “early-warning” information about injuries, property damage, consumer complaints, warranty claims, field reports and production data every calendar quarter. Equipment manufacturers are not required to supply early-warning materials, but reporting is triggered if there is an incident or allegation involving a death or the company issues recall notices or advisories referencing a defect or malfunction. The NHTSA is proposing to raise the threshold for large-volume vehicle manufacturers to 5,000 or more vehicles and require more recall information from tire manufacturers.

Labor Legislation: President Obama signed into law the “Ledbetter Fair Pay Act,” which overturns a 2007 Supreme Court ruling that enforced a 180-day statute of limitations for filing a pay discrimination complaint. At issue was whether an employee could pursue an allegation of pay discrimination beyond a 180-day filing deadline. The new law relaxes the statute of limitations and clarifies that discrimination can be alleged each time a paycheck is issued. SEMA joined the Law and OrderNational Association of Manufacturers and the U.S. Chamber of Commerce in opposing the bill since it could potentially open the door to frivolous litigation and open-ended lawsuits without time limits.

Wilderness Legislation: The House of Representatives is expected to approve legislation already passed by the U.S. Senate to add more than 2 million acres to the National Wilderness Preservation System. The “wilderness” designation is consequential since no mechanized activity is permitted on lands so designated. The issue is of keen interest to off-roaders and the SEMA-member companies that market products to those groups. The legislation designates wilderness in nine states and establishes several new national parks, monuments and conservation areas. Covered areas include portions in and around Joshua Tree National Park and the Eastern Sierras in California, Owyhee-Bruneau Canyonlands in Idaho, Mt. Hood in Oregon and Zion National Park in Utah. Some roads and trails were excluded from the wilderness designations and, therefore, remain available to the OHV enthusiast. Nevertheless, SEMA expressed regret that lawmakers had moved too quickly since not all roads and trails received protection.

Wed, 04/01/2009 - 15:20

SEMA News -- April 2009

By Linda Spencer

Affordable U.S. Products Designed to Fit Region’s Market Sought
 SEMA News, April 2009, South Africa Aftermarket
South Africans seek functional off-road accessories rather than those for show, given the serious off-roading excursions undertaken by many enthusiasts. Among the top-selling products for SUVs are protective and stylized aftermarket products, such as bull bars; recovery products, such as winches; performance products, such as engine enhancements; and traction products, such as specialty off-road tires and suspension.
Courtesy of Leisure Wheels
For the last eight years, the activity of accessorizing and improving the performance of vehicles has transformed from a hobby to a fully fledged culture of fierce competition,” said Jaisivir Sewpual of the U.S. Embassy in Cape Town, South Africa. “In the race to individualize and distinguish their vehicles from others, enthusiasts constantly seek innovative, authentic specialty components and accessories. In this lucrative segment, South Africans are highly receptive to U.S. brands and often follow trends set in the United States.”

A group of journalists from leading South African enthusiast magazines along with a team of importers/distributors provided their insights into the market through a joint U.S. Embassy/SEMA survey that the embassy carried out over the past six months. The middle class in South Africa—especially the black middle class—has been a driving force in the growth of the specialty-equipment market.

“The emerging black middle-class segment of the South African population is not only satisfied with a new vehicle, but will spend considerable amounts of money customizing and accessorizing their vehicles,” Sewpual said. “Their need to be different and to distinguish themselves and their vehicles is incredibly high. Due to this demand, there has been a surge in the number of new automotive styling and tuning retailers/workshops around the country.”

There is a lot of focus on aftermarket accessories in South Africa, said Minesh Bhagaloo, a journalist for some of the largest daily newspapers in South Africa, including The Star, The Pretoria News and Cape Times, but affordability is critical. Buyers are very price conscious, as disposable income levels are still modest. As several distributors noted, higher-priced items are often out of the reach of most South Africans, and minimum order requirements often are a frustration to the typically smaller-sized importer.

 SEMA News, April 2009, European and Japanese cars in South Africa

 European and Japanese cars are among the most often customized, such as this highly accessorized Honda.
Courtesy of Top Car

This problem has gotten worse because the global crisis affects the car and tuning markets in South Africa, which had enjoyed a number of years of strong growth. The National Association of Automobile Manufacturers (NAAMSA) reported on its website that increasingly tight credit and the negative wealth effect of the global financial crisis resulting from falling house prices and asset values, sharp falls in business confidence and consumer sentiment have sharply curbed vehicle sales in this market of 4.6 million vehicles over the past several months.

One importer noted that it is even more critical these days that overseas manufacturers price their products by taking into account poor exchange rates, customs duties on certain items and freight. All are factors to be considered, but only products that can be reasonably priced will succeed. Also, the cost of an item can be prohibitive, even though it may be a sought-after item.

The South African vehicle market has indeed slumped in line with the international economic slowdown. Specialty-equipment businesses are obviously affected by this, as are all other business sectors.

SEMA News, April 2009, South Africa, BMW 3 Series 

 BMW 3 Series

While the economic crisis has quelled demand across the board, the customization market for SUVs and off-road vehicles remains one of the strongest. Neil Harison of SA 4x4 magazine ventured a guess that the light-truck/off-road side of the market totaled 30%–40% of the overall South African specialty-equipment market. South Africans seek functional off-road accessories rather than those merely for show because of the serious off-roading excursions undertaken by many enthusiasts. Among the top-selling products for SUVs are protective and stylized aftermarket products, such as bull bars; recovery products, such as winches; performance products, such as engine enhancements; and traction products, such as specialty off-road tires and suspension. “However, there is a large demand for off-road trucks and SUVs due to the country’s large open spaces,” Angus Thompson, deputy editor of Top Car South Africa, said. “On the SUV and off-road side of things, it’s the older people with money who are buying the products that will enable them to do overlanding or camping in the bush. This is also growing in popularity as more and more South Africans use their 4x4s to explore not only their own country, but also the rest of Africa.”

 SEMA News, April 2009, South Africa, Honda Civic

Honda Civic

Jannie Herbst of Leisure Wheels said that SUVs and light pickups for overlanding and adventure form about 95% of the market his publication caters to.“In our magazine’s specific market, where we focus on overlanding adventures and lifestyle-oriented vehicles, that would be the Toyota Hilux pickup; Land Rover Defender; Toyota Land Cruiser Prado, 70 and 200 series; Mitsubishi Pajero and Nissan Navara pickup,” Herbst said. “The remaining 5% is made up of vehicles, such as the Land Rover Defender, which is still sold new here, and the Toyota Land Cruiser 70 wagon, which are dedicated overlanding-type vehicles.”

Thompson added that young guys with relatively little disposable income form the majority of those modifying their cars in South Africa. Among the most popular cars to accessorize are the BMW 3 Series, Honda Civic, Nissan 350Z and Volkswagen Golf.

Most of the cars on South African roads are European, Japanese or Korean brands, while American brands, such as Jeep, Dodge and Cadillac, sell in smaller numbers. Bhagaloo also emphasized this aspect of the market.

“We don’t have the range of American cars that you do,” he said. “Our market is probably more German and Japanese. Your aftermarket offerings need to factor this in. See www.naamsa.co.za for our monthly car-sales figures.”

 SEMA News, April 2009, South Africa, Nissan 350Z

 Nissan 350Z

Many of the U.S. brands sold in South Africa are European rather than U.S. specs. Australia, Japan, South Africa and the United Kingdom drive on the opposite side of the road compared to in the United States, necessitating fitment changes in a number of U.S.-made accessories.

Those interviewed for the U.S. Embassy/SEMA study highlighted the challenges faced by the specialty-equipment industry. Unlike in many other markets, government regulations did not make it on the short list of problems. We were repeatedly told that South Africa’s legislation demands only that a vehicle be road-worthy, and there are effectively no limits on customization.

“The only legal restrictions we have pertain to the amount of noise certain aftermarket exhausts and mufflers make as well as the degree of window tinting,” Thompson said, “but this is seldom enforced by the authorities.”

 SEMA News, April 2009, South Africa, Volkswagen Golf

 Volkswagen Golf

Far and away the largest challenge faced by South African companies was counterfeit products. Businesses representatives and journalists alike noted the increasing number of inferior and cheap products flooding the market. They also said that U.S. products are more expensive in the South African market due to tariffs ranging between 5%–30%. This significantly raises the cost of U.S. products and puts American manufacturers at a disadvantage against competitors in countries in which South Africa has free-trade agreements, including Europe. U.S. products are more expensive in South Africa due to the rapid depreciation of the local currency, the rand, with an exchange rate of 10.10 rand to $1 compared to 7.1 rand to the dollar 18 months ago.

“As in other parts of the world, the ‘new vehicle’ situation in South Africa is dire,” Herbst said. “Almost 5,000 vehicles are repossessed every month, and the used-car market is hugely oversaturated. Meanwhile, many specialty-equipment businesses are coming up with innovative ways to brave the storm. And our magazine recently posted its highest circulation figures for the fiscal year.”

A South African importer echoed that view, saying “…a company that can work around that obstacle will find themselves in a good position to penetrate the market.” He noted that U.S. products were present in the major South African cities of Cape Town, the seat of the national legislature; Pretoria, where the government executive branch is based; Johannesburg, known as the commercial capital; and Durban, a fast-growing port city on the east coast. The U.S. Embassy emphasized that personal interviews with local retailers and importers indicated their eagerness to identify and establish distributor agreements with U.S. suppliers.

Below are links to lists of some of the top importers/distributors and media in the South African market. Also, a new trade show will take place this spring—Automechanika South Africa in Johannesburg. More information is available at www.automechanika.de.

Enthusiast Media

A SEMA-compiled list of South African media is available to members online at www.sema.org/international.

Importers/Distributors

SEMA has a new list of distributors/importers available for members online at www.sema.org/international. The list was compiled from a number of sources, including a recent survey conducted for SEMA by the U.S. Embassy in South Africa as well as input from South African media.

Wed, 04/01/2009 - 15:20

SEMA News -- April 2009

By Linda Spencer

Affordable U.S. Products Designed to Fit Region’s Market Sought
 SEMA News, April 2009, South Africa Aftermarket
South Africans seek functional off-road accessories rather than those for show, given the serious off-roading excursions undertaken by many enthusiasts. Among the top-selling products for SUVs are protective and stylized aftermarket products, such as bull bars; recovery products, such as winches; performance products, such as engine enhancements; and traction products, such as specialty off-road tires and suspension.
Courtesy of Leisure Wheels
For the last eight years, the activity of accessorizing and improving the performance of vehicles has transformed from a hobby to a fully fledged culture of fierce competition,” said Jaisivir Sewpual of the U.S. Embassy in Cape Town, South Africa. “In the race to individualize and distinguish their vehicles from others, enthusiasts constantly seek innovative, authentic specialty components and accessories. In this lucrative segment, South Africans are highly receptive to U.S. brands and often follow trends set in the United States.”

A group of journalists from leading South African enthusiast magazines along with a team of importers/distributors provided their insights into the market through a joint U.S. Embassy/SEMA survey that the embassy carried out over the past six months. The middle class in South Africa—especially the black middle class—has been a driving force in the growth of the specialty-equipment market.

“The emerging black middle-class segment of the South African population is not only satisfied with a new vehicle, but will spend considerable amounts of money customizing and accessorizing their vehicles,” Sewpual said. “Their need to be different and to distinguish themselves and their vehicles is incredibly high. Due to this demand, there has been a surge in the number of new automotive styling and tuning retailers/workshops around the country.”

There is a lot of focus on aftermarket accessories in South Africa, said Minesh Bhagaloo, a journalist for some of the largest daily newspapers in South Africa, including The Star, The Pretoria News and Cape Times, but affordability is critical. Buyers are very price conscious, as disposable income levels are still modest. As several distributors noted, higher-priced items are often out of the reach of most South Africans, and minimum order requirements often are a frustration to the typically smaller-sized importer.

 SEMA News, April 2009, European and Japanese cars in South Africa

 European and Japanese cars are among the most often customized, such as this highly accessorized Honda.
Courtesy of Top Car

This problem has gotten worse because the global crisis affects the car and tuning markets in South Africa, which had enjoyed a number of years of strong growth. The National Association of Automobile Manufacturers (NAAMSA) reported on its website that increasingly tight credit and the negative wealth effect of the global financial crisis resulting from falling house prices and asset values, sharp falls in business confidence and consumer sentiment have sharply curbed vehicle sales in this market of 4.6 million vehicles over the past several months.

One importer noted that it is even more critical these days that overseas manufacturers price their products by taking into account poor exchange rates, customs duties on certain items and freight. All are factors to be considered, but only products that can be reasonably priced will succeed. Also, the cost of an item can be prohibitive, even though it may be a sought-after item.

The South African vehicle market has indeed slumped in line with the international economic slowdown. Specialty-equipment businesses are obviously affected by this, as are all other business sectors.

SEMA News, April 2009, South Africa, BMW 3 Series 

 BMW 3 Series

While the economic crisis has quelled demand across the board, the customization market for SUVs and off-road vehicles remains one of the strongest. Neil Harison of SA 4x4 magazine ventured a guess that the light-truck/off-road side of the market totaled 30%–40% of the overall South African specialty-equipment market. South Africans seek functional off-road accessories rather than those merely for show because of the serious off-roading excursions undertaken by many enthusiasts. Among the top-selling products for SUVs are protective and stylized aftermarket products, such as bull bars; recovery products, such as winches; performance products, such as engine enhancements; and traction products, such as specialty off-road tires and suspension. “However, there is a large demand for off-road trucks and SUVs due to the country’s large open spaces,” Angus Thompson, deputy editor of Top Car South Africa, said. “On the SUV and off-road side of things, it’s the older people with money who are buying the products that will enable them to do overlanding or camping in the bush. This is also growing in popularity as more and more South Africans use their 4x4s to explore not only their own country, but also the rest of Africa.”

 SEMA News, April 2009, South Africa, Honda Civic

Honda Civic

Jannie Herbst of Leisure Wheels said that SUVs and light pickups for overlanding and adventure form about 95% of the market his publication caters to.“In our magazine’s specific market, where we focus on overlanding adventures and lifestyle-oriented vehicles, that would be the Toyota Hilux pickup; Land Rover Defender; Toyota Land Cruiser Prado, 70 and 200 series; Mitsubishi Pajero and Nissan Navara pickup,” Herbst said. “The remaining 5% is made up of vehicles, such as the Land Rover Defender, which is still sold new here, and the Toyota Land Cruiser 70 wagon, which are dedicated overlanding-type vehicles.”

Thompson added that young guys with relatively little disposable income form the majority of those modifying their cars in South Africa. Among the most popular cars to accessorize are the BMW 3 Series, Honda Civic, Nissan 350Z and Volkswagen Golf.

Most of the cars on South African roads are European, Japanese or Korean brands, while American brands, such as Jeep, Dodge and Cadillac, sell in smaller numbers. Bhagaloo also emphasized this aspect of the market.

“We don’t have the range of American cars that you do,” he said. “Our market is probably more German and Japanese. Your aftermarket offerings need to factor this in. See www.naamsa.co.za for our monthly car-sales figures.”

 SEMA News, April 2009, South Africa, Nissan 350Z

 Nissan 350Z

Many of the U.S. brands sold in South Africa are European rather than U.S. specs. Australia, Japan, South Africa and the United Kingdom drive on the opposite side of the road compared to in the United States, necessitating fitment changes in a number of U.S.-made accessories.

Those interviewed for the U.S. Embassy/SEMA study highlighted the challenges faced by the specialty-equipment industry. Unlike in many other markets, government regulations did not make it on the short list of problems. We were repeatedly told that South Africa’s legislation demands only that a vehicle be road-worthy, and there are effectively no limits on customization.

“The only legal restrictions we have pertain to the amount of noise certain aftermarket exhausts and mufflers make as well as the degree of window tinting,” Thompson said, “but this is seldom enforced by the authorities.”

 SEMA News, April 2009, South Africa, Volkswagen Golf

 Volkswagen Golf

Far and away the largest challenge faced by South African companies was counterfeit products. Businesses representatives and journalists alike noted the increasing number of inferior and cheap products flooding the market. They also said that U.S. products are more expensive in the South African market due to tariffs ranging between 5%–30%. This significantly raises the cost of U.S. products and puts American manufacturers at a disadvantage against competitors in countries in which South Africa has free-trade agreements, including Europe. U.S. products are more expensive in South Africa due to the rapid depreciation of the local currency, the rand, with an exchange rate of 10.10 rand to $1 compared to 7.1 rand to the dollar 18 months ago.

“As in other parts of the world, the ‘new vehicle’ situation in South Africa is dire,” Herbst said. “Almost 5,000 vehicles are repossessed every month, and the used-car market is hugely oversaturated. Meanwhile, many specialty-equipment businesses are coming up with innovative ways to brave the storm. And our magazine recently posted its highest circulation figures for the fiscal year.”

A South African importer echoed that view, saying “…a company that can work around that obstacle will find themselves in a good position to penetrate the market.” He noted that U.S. products were present in the major South African cities of Cape Town, the seat of the national legislature; Pretoria, where the government executive branch is based; Johannesburg, known as the commercial capital; and Durban, a fast-growing port city on the east coast. The U.S. Embassy emphasized that personal interviews with local retailers and importers indicated their eagerness to identify and establish distributor agreements with U.S. suppliers.

Below are links to lists of some of the top importers/distributors and media in the South African market. Also, a new trade show will take place this spring—Automechanika South Africa in Johannesburg. More information is available at www.automechanika.de.

Enthusiast Media

A SEMA-compiled list of South African media is available to members online at www.sema.org/international.

Importers/Distributors

SEMA has a new list of distributors/importers available for members online at www.sema.org/international. The list was compiled from a number of sources, including a recent survey conducted for SEMA by the U.S. Embassy in South Africa as well as input from South African media.

Wed, 04/01/2009 - 15:20

SEMA News -- April 2009

By Linda Spencer

Affordable U.S. Products Designed to Fit Region’s Market Sought
 SEMA News, April 2009, South Africa Aftermarket
South Africans seek functional off-road accessories rather than those for show, given the serious off-roading excursions undertaken by many enthusiasts. Among the top-selling products for SUVs are protective and stylized aftermarket products, such as bull bars; recovery products, such as winches; performance products, such as engine enhancements; and traction products, such as specialty off-road tires and suspension.
Courtesy of Leisure Wheels
For the last eight years, the activity of accessorizing and improving the performance of vehicles has transformed from a hobby to a fully fledged culture of fierce competition,” said Jaisivir Sewpual of the U.S. Embassy in Cape Town, South Africa. “In the race to individualize and distinguish their vehicles from others, enthusiasts constantly seek innovative, authentic specialty components and accessories. In this lucrative segment, South Africans are highly receptive to U.S. brands and often follow trends set in the United States.”

A group of journalists from leading South African enthusiast magazines along with a team of importers/distributors provided their insights into the market through a joint U.S. Embassy/SEMA survey that the embassy carried out over the past six months. The middle class in South Africa—especially the black middle class—has been a driving force in the growth of the specialty-equipment market.

“The emerging black middle-class segment of the South African population is not only satisfied with a new vehicle, but will spend considerable amounts of money customizing and accessorizing their vehicles,” Sewpual said. “Their need to be different and to distinguish themselves and their vehicles is incredibly high. Due to this demand, there has been a surge in the number of new automotive styling and tuning retailers/workshops around the country.”

There is a lot of focus on aftermarket accessories in South Africa, said Minesh Bhagaloo, a journalist for some of the largest daily newspapers in South Africa, including The Star, The Pretoria News and Cape Times, but affordability is critical. Buyers are very price conscious, as disposable income levels are still modest. As several distributors noted, higher-priced items are often out of the reach of most South Africans, and minimum order requirements often are a frustration to the typically smaller-sized importer.

 SEMA News, April 2009, European and Japanese cars in South Africa

 European and Japanese cars are among the most often customized, such as this highly accessorized Honda.
Courtesy of Top Car

This problem has gotten worse because the global crisis affects the car and tuning markets in South Africa, which had enjoyed a number of years of strong growth. The National Association of Automobile Manufacturers (NAAMSA) reported on its website that increasingly tight credit and the negative wealth effect of the global financial crisis resulting from falling house prices and asset values, sharp falls in business confidence and consumer sentiment have sharply curbed vehicle sales in this market of 4.6 million vehicles over the past several months.

One importer noted that it is even more critical these days that overseas manufacturers price their products by taking into account poor exchange rates, customs duties on certain items and freight. All are factors to be considered, but only products that can be reasonably priced will succeed. Also, the cost of an item can be prohibitive, even though it may be a sought-after item.

The South African vehicle market has indeed slumped in line with the international economic slowdown. Specialty-equipment businesses are obviously affected by this, as are all other business sectors.

SEMA News, April 2009, South Africa, BMW 3 Series 

 BMW 3 Series

While the economic crisis has quelled demand across the board, the customization market for SUVs and off-road vehicles remains one of the strongest. Neil Harison of SA 4x4 magazine ventured a guess that the light-truck/off-road side of the market totaled 30%–40% of the overall South African specialty-equipment market. South Africans seek functional off-road accessories rather than those merely for show because of the serious off-roading excursions undertaken by many enthusiasts. Among the top-selling products for SUVs are protective and stylized aftermarket products, such as bull bars; recovery products, such as winches; performance products, such as engine enhancements; and traction products, such as specialty off-road tires and suspension. “However, there is a large demand for off-road trucks and SUVs due to the country’s large open spaces,” Angus Thompson, deputy editor of Top Car South Africa, said. “On the SUV and off-road side of things, it’s the older people with money who are buying the products that will enable them to do overlanding or camping in the bush. This is also growing in popularity as more and more South Africans use their 4x4s to explore not only their own country, but also the rest of Africa.”

 SEMA News, April 2009, South Africa, Honda Civic

Honda Civic

Jannie Herbst of Leisure Wheels said that SUVs and light pickups for overlanding and adventure form about 95% of the market his publication caters to.“In our magazine’s specific market, where we focus on overlanding adventures and lifestyle-oriented vehicles, that would be the Toyota Hilux pickup; Land Rover Defender; Toyota Land Cruiser Prado, 70 and 200 series; Mitsubishi Pajero and Nissan Navara pickup,” Herbst said. “The remaining 5% is made up of vehicles, such as the Land Rover Defender, which is still sold new here, and the Toyota Land Cruiser 70 wagon, which are dedicated overlanding-type vehicles.”

Thompson added that young guys with relatively little disposable income form the majority of those modifying their cars in South Africa. Among the most popular cars to accessorize are the BMW 3 Series, Honda Civic, Nissan 350Z and Volkswagen Golf.

Most of the cars on South African roads are European, Japanese or Korean brands, while American brands, such as Jeep, Dodge and Cadillac, sell in smaller numbers. Bhagaloo also emphasized this aspect of the market.

“We don’t have the range of American cars that you do,” he said. “Our market is probably more German and Japanese. Your aftermarket offerings need to factor this in. See www.naamsa.co.za for our monthly car-sales figures.”

 SEMA News, April 2009, South Africa, Nissan 350Z

 Nissan 350Z

Many of the U.S. brands sold in South Africa are European rather than U.S. specs. Australia, Japan, South Africa and the United Kingdom drive on the opposite side of the road compared to in the United States, necessitating fitment changes in a number of U.S.-made accessories.

Those interviewed for the U.S. Embassy/SEMA study highlighted the challenges faced by the specialty-equipment industry. Unlike in many other markets, government regulations did not make it on the short list of problems. We were repeatedly told that South Africa’s legislation demands only that a vehicle be road-worthy, and there are effectively no limits on customization.

“The only legal restrictions we have pertain to the amount of noise certain aftermarket exhausts and mufflers make as well as the degree of window tinting,” Thompson said, “but this is seldom enforced by the authorities.”

 SEMA News, April 2009, South Africa, Volkswagen Golf

 Volkswagen Golf

Far and away the largest challenge faced by South African companies was counterfeit products. Businesses representatives and journalists alike noted the increasing number of inferior and cheap products flooding the market. They also said that U.S. products are more expensive in the South African market due to tariffs ranging between 5%–30%. This significantly raises the cost of U.S. products and puts American manufacturers at a disadvantage against competitors in countries in which South Africa has free-trade agreements, including Europe. U.S. products are more expensive in South Africa due to the rapid depreciation of the local currency, the rand, with an exchange rate of 10.10 rand to $1 compared to 7.1 rand to the dollar 18 months ago.

“As in other parts of the world, the ‘new vehicle’ situation in South Africa is dire,” Herbst said. “Almost 5,000 vehicles are repossessed every month, and the used-car market is hugely oversaturated. Meanwhile, many specialty-equipment businesses are coming up with innovative ways to brave the storm. And our magazine recently posted its highest circulation figures for the fiscal year.”

A South African importer echoed that view, saying “…a company that can work around that obstacle will find themselves in a good position to penetrate the market.” He noted that U.S. products were present in the major South African cities of Cape Town, the seat of the national legislature; Pretoria, where the government executive branch is based; Johannesburg, known as the commercial capital; and Durban, a fast-growing port city on the east coast. The U.S. Embassy emphasized that personal interviews with local retailers and importers indicated their eagerness to identify and establish distributor agreements with U.S. suppliers.

Below are links to lists of some of the top importers/distributors and media in the South African market. Also, a new trade show will take place this spring—Automechanika South Africa in Johannesburg. More information is available at www.automechanika.de.

Enthusiast Media

A SEMA-compiled list of South African media is available to members online at www.sema.org/international.

Importers/Distributors

SEMA has a new list of distributors/importers available for members online at www.sema.org/international. The list was compiled from a number of sources, including a recent survey conducted for SEMA by the U.S. Embassy in South Africa as well as input from South African media.

Wed, 04/01/2009 - 14:38

SEMA News -- April 2009
SPY PHOTOS

The images and information included in “Spy Photos” are supplied by the spy shooters at Brenda Priddy & Co. “Spy Photos” are also included each week in SEMA eNews, the association’s electronic newsletter. To receive your copy of SEMA eNews, e-mail enews@sema.org.

SEMA News, April 2009, Spy Photos SEMA News, April 2009, Spy Photos, Fiat 500 width=

Fiat 500 Convertible

When it Hits: Expected in European dealerships within a few months. What Priddy Says: A possible candidate for import to North America, the Fiat 500’s retractable roof design sets itself apart from competitors, such as the MINI
or VW Beetle. 

 

 SEMA News, April 2009, Spy Photos, MINI Crossman SEMA News, April 2009, Spy Photos, MINI Crossman 

MINI Crossman

When it Hits: A 2010 release is expected. What Priddy Says: Spotted during winter testing, the MINI Crossman represents a new angle for the automaker. The high-riding Crossman (previously called the Colorado within BMW) will feature all-wheel drive, making it a candidate for active individuals needing a small car that can get them to the slopes.

SEMA News, April 2009, Spy Photos, McLaren P11 Prototype SEMA News, April 2009, Spy Photos, McLaren P11 Prototype

McLaren P11 Prototype

When it Hits: Tentative introduction later this year; production to begin in 2010. What Priddy Says: Specs are as elusive as actual P11 photos, but recent speculation calls for a Mercedes-Benz-sourced V8 (550 hp), possibly mated to an F1-style sequential transmission.

 SEMA News, April 2009, Spy Photos, Ford Coyote V8 SEMA News, April 2009, Spy Photos, Ford Coyote V8

Ford’s “Coyote” V8

When it Hits: To be offered in the 2011 Mustang and F-150. What Priddy Says: Ford’s all-new V8, code-named “Coyote,” is estimated at 400 hp and 400 lb.-ft. of torque, with fuel economy close to that of today’s 5.4L engine.

Photos Copyright Brenda Priddy & Company. Reuse or reproduction without the copyright holder’s consent is prohibited.

Wed, 04/01/2009 - 14:21

SEMA News -- April 2009
INDUSTRY NEWS

 

SEMA’s Show department has released these deadlines to assist exhibitors and attendees in successful SEMA Show planning:

SEMA News, April 2009, Industry News, SEMA Show 

The 2009 SEMA Show will be held November 3–6, in Las Vegas. For more details, visit www.SEMAShow.com.

Exhibit Space Rental Agreement (ESRA) forms were posted online starting February 20 at www.SEMAShow.com.

Attendee registration for the 2009 Show began March 9, and sign-ups are available at www.SEMAShow.com.

Exclusive SEMA room rates for more than 20 Las Vegas hotels were also available as of March 9. Room rates start as low as $59.

Exhibitors who submit their rental agreement deposits by May 8 will be included in the priority space selection process, which will be held June 16–30.

  

  

  

  

Industry Raises More Than $134,000 for Children’s Charities

Through its auction and fundraising activities, the 2008 SEMA Installation Banquet & Gala Fundraiser raised more than $134,000 for two important charities—the Victory Junction Gang Camp for kids and the Childhelp organization.

SEMA News, April 2009, Industry News, SEMA Cares, Chris Kersting, Joel Ayres

On behalf of the automotive specialty-equipment industry, SEMA President and CEO Chris Kersting (left) and SEMA Cares Committee Chairman Joel Ayres (right) presented (second from left) and  with more than $67,000 that was raised through an industry-wide fundraising effort. The SEMA Cares Committee was created about a year ago to unite the industry’s fundraising efforts and provide professionals with an easy way to give to those in need.

NASCAR champion Kyle Petty (center) thanked SEMA Chairman of the Board Jim Cozzie (left) and former SEMA Board member Matt Agosta of Steele Rubber Products as he accepted the donation made to the Victory Junction Gang Camp. The camp helps children suffering from chronic illnesses.

 SEMA News, April 2009, Industry News, SEMA Cares, Kyle Petty, Jim Cozzie, Matt

  

Top 10 Best Engineered New Products

Barcode scanningtechnology was introduced at the SEMA Show for the first time in 2008, providing WDs, installers and retailers easy access to new-product specs and key details. More than 2,000 products were entered in the Show’s New Products Showcase, and about 26% of those were placed in the Best New Engineered category. Here are the products that grabbed the most scans.

 SEMA News, April 2009, Industry News, Autonet Mobile 

Autonet Mobile, Autonet Mobile,
http://www.autonetmobile.com/, 800/977-2107

 SEMA News, April 2009, Industry News, TricPlate 

TricPlate, Switchable License Plate Film,
http://www.tricplate.com/, 954/328-9507

 SEMA News, April 2009, Industry News, Bully Dog Technologies 

Bully Dog Technologies, GT (Gauge Tuner),
http://www.bullydog.com/, 866/285-5936

 SEMA News, April 2009, Industry News, Professional ProductsProfessional Products, Powerjection III,
http://www.professional-products.com/, 323-779-2020 
 SEMA News, April 2009, Industry News, PlasmaGlow

PlasmaGlow, Illuminators LED Modules.
www.plasmaglow.com, 480/222-0285

 
 SEMA News, April 2009, Industry News, Undercover

Undercover, Swing Case,
http://www.undercoverinfo.com/, 417/753-8000

 
 SEMA News, April 2009, Industry News, Drew Technologies

Drew Technologies, DashDAQ,
http://www.drewtech.com/, 734/222-5228

 
 SEMA News, April 2009, Industry News, Engineering Inc.Engineering Inc.,
Titanium Turbo Heat Shield,
http://www.designengineering.com/, 800/264-9472 
 SEMA News, April 2009, Industry News, Pypes Performance Exhaust

Pypes Performance Exhaust,
Electric Cutouts,
http://www.pypesexhaust.com/, 800/421-3890

 
 SEMA News, April 2009, Industry News, XtremeXtreme,
http://www.sctflash.com/, 407/774-2447 

See all of the products entered in the New Products Showcase at www.semadigital.com.

  

www.SEMA.org Gets a Tune-Up

Coming soon...the new www.SEMA.org, an interactive experience focused on creating relevant experiences for members of the specialty-equipment industry while offering the searching and browsing tools to find what you want—fast!

SEMA members will have access to a new member-only benefit called MySEMA. The powerful MySEMA portal will allow members to browse company and user directories, send and receive messages, and receive personalized industry content through a variety of media channels. Additionally, you will be able to connect with other members with similar interests and have a team of designated staff there to help maximize your membership value.

With the vision and leadership of SEMA, powered by website development partner NFi Studios, MySEMA and www.SEMA.org will continually evolve and adapt to your needs.

MySEMA and www.SEMA.org and will be in public beta starting March 27, 2009. 

 

SEMA News, April 2009, Industry News, Vehicle Technology 

As new-vehicle technology challenges the aftermarket to plan for the future, business technology helps to streamline processes and expose errors so companies can conduct business more efficiently and gain lost sales margins.

New-Vehicle Technology and Data Standards

Just as new-vehicle technology changes the way cars operate, business technology is changing the way parts are being presented and cataloged to make processes more efficient. Industry-standard electronic product cataloging formats, such as Product Information Exchange Standards (PIES) and the Automotive Aftermarket Industry Association (AAIA) Catalog Enhanced Standard (ACES) are becoming widely accepted throughout the aftermarket, collecting product information, such as units of measure, marketing descriptions, dimensions, jobber pricing, vehicle applications and myriad other data.

Many of the industry’s leading distributors have embraced these standards and adherence to them has allowed companies to discover discrepancies between the products that their distributors advertise versus what the manufacturer actually makes.

In fact, results of a recently published SEMA study that matched 19 manufacturers (or “suppliers”) with five distributors (or “receivers”) showed that more than 24% of the current, active parts in the supplier systems were not found in their distributors’ systems. Around 29% of the parts in the distributors’ systems were not in the corresponding supplier systems. For the 71% that matched on part numbers, 9% of the jobber prices were in error, and a huge number of vital data fields were missing in both the suppliers’ and distributors’ systems.

As new-vehicle technology challenges the aftermarket to plan for the future, business technology helps to streamline processes and expose errors so companies can conduct business more efficiently and gain lost sales margins.

For more information about these standards or the results of the study, visit www.sema.org/btc.

  

  

FAST FACTS

 SEMA News, April 2009, Fast Facts, Karen Evans St. John

Karen Evans St. John was named president of Kee Auto Top Manufacturing Co. Evans St. John has worked for Kee Auto Top for 25 years in several capacities, including manufacturing, research, human resources and sales and marketing.
Kee Auto Top, Charlotte, NC; 704/332-8213.

SEMA News, April 2009, Fast Facts, Dave Butts 

Dave Butts was promoted to vice president of information technology for Recaptured Energy Technologies. Butts is responsible for the company’s vehicle systems development and technology solutions functions. Previously, Butts developed, built and expanded decision-support and business-process integration hardware, software and network platforms for Fortune 500 companies.  

 SEMA News, April 2009, Fast Facts, Roy Brizio

The Goodguys Rod & Custom Association announced that builder Roy Brizio will round up the hot rods and customs he’s built over the past 32 years and display them together as a group for the first time in history at this year’s Goodguys 23rd Eagle One West Coast Nationals, August 21–23, at the Pleasanton Fairgrounds in California. Goodguys, Pleasanton, CA; 925/838-9876.

SEMA News, April 2009, Fast Facts, Ryan Siedel 

SPAL USA promoted former inside sales representative Ryan Siedel to regional sales assistant for the company’s automotive aftermarket high-performance fan, blower and electronic accessory products. He will assist the sales team in the growth and development of the company’s product line and help support its sales and marketing initiatives. The company also named Tim W. McGee regional sales manager for its commercial fan, blower and electronic product lines. McGee will work to develop and expand the OEM market share for SPAL USA’s premium electric cooling fans and blowers in the southeastern United States. SPAL, Ankeny, IA; 515/289-7000.  

 SEMA News, April 2009, Fast Facts, Tony Reeves

Beck/Arnley hired Tony Reeves as a catalog specialist to assist with all catalog and database responsibilities and help manage the image database and customer files. Reeves previously spent 20 years with Beck/Arnley working in catalog research. The company also hired Chad Horton as IT liaison. He will work with sales and operations, handle requests from management and work on special projects.

SEMA News, April 2009, Fast Facts, Speedy Bill Smith 

“Speedy” Bill Smith, founder and owner of Speedway Motors, was the eighth recipient of the Robert E. Petersen Lifetime Achievement Award. The annual award recognizes significant contributions to the business and hobby of hot rodding and restoration. The award was presented during the grand opening breakfast at the 11th Annual Hotrod & Restoration Trade Show.

SEMA News, April 2009, Fast Facts, Scott Davis 

Scott Davis was hired by Lunati as a new account representative to support the company’s more aggressive direction upon being restored to private ownership. “With the previous ownership, engine builders were unable to deal directly with Lunati,” said Derek Scott, Lunati’s director of operations. “We are actively seeking relationships with qualified engine builders, and we are adding the necessary resources to handle their needs.”  


Mickey Thompson Performance Tires & Wheels will not participate as a major sponsor of the NHRA in 2009. “The tough decision to suspend our relationship with NHRA after more than 26 years is due to several concerns, including a recent mandate by the NHRA that Pro Stock racers will be required to compete exclusively on Goodyear tires,” said Ken Warner, vice president of sales and marketing for Mickey Thompson. Mickey Thompson Performance Tires & Wheels, Corona, CA; 951/817-0101.

Speedway Motors Inc. acquired the street-rod-related assets of Total Performance Inc. All Total Performance operations will be consolidated into the Speedway Motors’ facilities in Lincoln, Nebraska. “Speedy” Bill Smith, founder and president of Speedway Motors, said that a smooth, seamless transition is expected. Terms of the transaction were not disclosed. Speedway Motors Inc., Lincoln, NE; 800/979-0122. Total Performance, Wallingford, CT; 203/265-5667.

The American International Automotive Dealers Association (AIADA)
honored longtime member and past director John H. (Jack) Thompson of Doylestown, Pennsylvania, with the David F. Mungenast Sr. Lifetime Achievement Award. The award is presented annually to an individual whose deep commitment and contributions to the international auto industry and his or her community sets them apart. AIADA, Alexandria, VA; 800/GO-AIADA .

Infineon Raceway Media Relations Department Manager John Cardinale was named the NASCAR Track PR Representative of the Year at the annual NASCAR PR Summit. Voted on by members of the motorsports media, previous winners of the award and NASCAR PR, the NASCAR Track PR Representative of the Year award recognizes the outstanding efforts of a track representative. Infineon, Sonoma, CA; 707/938-8448.

Wed, 04/01/2009 - 14:21

SEMA News -- April 2009
INDUSTRY NEWS

 

SEMA’s Show department has released these deadlines to assist exhibitors and attendees in successful SEMA Show planning:

SEMA News, April 2009, Industry News, SEMA Show 

The 2009 SEMA Show will be held November 3–6, in Las Vegas. For more details, visit www.SEMAShow.com.

Exhibit Space Rental Agreement (ESRA) forms were posted online starting February 20 at www.SEMAShow.com.

Attendee registration for the 2009 Show began March 9, and sign-ups are available at www.SEMAShow.com.

Exclusive SEMA room rates for more than 20 Las Vegas hotels were also available as of March 9. Room rates start as low as $59.

Exhibitors who submit their rental agreement deposits by May 8 will be included in the priority space selection process, which will be held June 16–30.

  

  

  

  

Industry Raises More Than $134,000 for Children’s Charities

Through its auction and fundraising activities, the 2008 SEMA Installation Banquet & Gala Fundraiser raised more than $134,000 for two important charities—the Victory Junction Gang Camp for kids and the Childhelp organization.

SEMA News, April 2009, Industry News, SEMA Cares, Chris Kersting, Joel Ayres

On behalf of the automotive specialty-equipment industry, SEMA President and CEO Chris Kersting (left) and SEMA Cares Committee Chairman Joel Ayres (right) presented (second from left) and  with more than $67,000 that was raised through an industry-wide fundraising effort. The SEMA Cares Committee was created about a year ago to unite the industry’s fundraising efforts and provide professionals with an easy way to give to those in need.

NASCAR champion Kyle Petty (center) thanked SEMA Chairman of the Board Jim Cozzie (left) and former SEMA Board member Matt Agosta of Steele Rubber Products as he accepted the donation made to the Victory Junction Gang Camp. The camp helps children suffering from chronic illnesses.

 SEMA News, April 2009, Industry News, SEMA Cares, Kyle Petty, Jim Cozzie, Matt

  

Top 10 Best Engineered New Products

Barcode scanningtechnology was introduced at the SEMA Show for the first time in 2008, providing WDs, installers and retailers easy access to new-product specs and key details. More than 2,000 products were entered in the Show’s New Products Showcase, and about 26% of those were placed in the Best New Engineered category. Here are the products that grabbed the most scans.

 SEMA News, April 2009, Industry News, Autonet Mobile 

Autonet Mobile, Autonet Mobile,
http://www.autonetmobile.com/, 800/977-2107

 SEMA News, April 2009, Industry News, TricPlate 

TricPlate, Switchable License Plate Film,
http://www.tricplate.com/, 954/328-9507

 SEMA News, April 2009, Industry News, Bully Dog Technologies 

Bully Dog Technologies, GT (Gauge Tuner),
http://www.bullydog.com/, 866/285-5936

 SEMA News, April 2009, Industry News, Professional ProductsProfessional Products, Powerjection III,
http://www.professional-products.com/, 323-779-2020 
 SEMA News, April 2009, Industry News, PlasmaGlow

PlasmaGlow, Illuminators LED Modules.
www.plasmaglow.com, 480/222-0285

 
 SEMA News, April 2009, Industry News, Undercover

Undercover, Swing Case,
http://www.undercoverinfo.com/, 417/753-8000

 
 SEMA News, April 2009, Industry News, Drew Technologies

Drew Technologies, DashDAQ,
http://www.drewtech.com/, 734/222-5228

 
 SEMA News, April 2009, Industry News, Engineering Inc.Engineering Inc.,
Titanium Turbo Heat Shield,
http://www.designengineering.com/, 800/264-9472 
 SEMA News, April 2009, Industry News, Pypes Performance Exhaust

Pypes Performance Exhaust,
Electric Cutouts,
http://www.pypesexhaust.com/, 800/421-3890

 
 SEMA News, April 2009, Industry News, XtremeXtreme,
http://www.sctflash.com/, 407/774-2447 

See all of the products entered in the New Products Showcase at www.semadigital.com.

  

www.SEMA.org Gets a Tune-Up

Coming soon...the new www.SEMA.org, an interactive experience focused on creating relevant experiences for members of the specialty-equipment industry while offering the searching and browsing tools to find what you want—fast!

SEMA members will have access to a new member-only benefit called MySEMA. The powerful MySEMA portal will allow members to browse company and user directories, send and receive messages, and receive personalized industry content through a variety of media channels. Additionally, you will be able to connect with other members with similar interests and have a team of designated staff there to help maximize your membership value.

With the vision and leadership of SEMA, powered by website development partner NFi Studios, MySEMA and www.SEMA.org will continually evolve and adapt to your needs.

MySEMA and www.SEMA.org and will be in public beta starting March 27, 2009. 

 

SEMA News, April 2009, Industry News, Vehicle Technology 

As new-vehicle technology challenges the aftermarket to plan for the future, business technology helps to streamline processes and expose errors so companies can conduct business more efficiently and gain lost sales margins.

New-Vehicle Technology and Data Standards

Just as new-vehicle technology changes the way cars operate, business technology is changing the way parts are being presented and cataloged to make processes more efficient. Industry-standard electronic product cataloging formats, such as Product Information Exchange Standards (PIES) and the Automotive Aftermarket Industry Association (AAIA) Catalog Enhanced Standard (ACES) are becoming widely accepted throughout the aftermarket, collecting product information, such as units of measure, marketing descriptions, dimensions, jobber pricing, vehicle applications and myriad other data.

Many of the industry’s leading distributors have embraced these standards and adherence to them has allowed companies to discover discrepancies between the products that their distributors advertise versus what the manufacturer actually makes.

In fact, results of a recently published SEMA study that matched 19 manufacturers (or “suppliers”) with five distributors (or “receivers”) showed that more than 24% of the current, active parts in the supplier systems were not found in their distributors’ systems. Around 29% of the parts in the distributors’ systems were not in the corresponding supplier systems. For the 71% that matched on part numbers, 9% of the jobber prices were in error, and a huge number of vital data fields were missing in both the suppliers’ and distributors’ systems.

As new-vehicle technology challenges the aftermarket to plan for the future, business technology helps to streamline processes and expose errors so companies can conduct business more efficiently and gain lost sales margins.

For more information about these standards or the results of the study, visit www.sema.org/btc.

  

  

FAST FACTS

 SEMA News, April 2009, Fast Facts, Karen Evans St. John

Karen Evans St. John was named president of Kee Auto Top Manufacturing Co. Evans St. John has worked for Kee Auto Top for 25 years in several capacities, including manufacturing, research, human resources and sales and marketing.
Kee Auto Top, Charlotte, NC; 704/332-8213.

SEMA News, April 2009, Fast Facts, Dave Butts 

Dave Butts was promoted to vice president of information technology for Recaptured Energy Technologies. Butts is responsible for the company’s vehicle systems development and technology solutions functions. Previously, Butts developed, built and expanded decision-support and business-process integration hardware, software and network platforms for Fortune 500 companies.  

 SEMA News, April 2009, Fast Facts, Roy Brizio

The Goodguys Rod & Custom Association announced that builder Roy Brizio will round up the hot rods and customs he’s built over the past 32 years and display them together as a group for the first time in history at this year’s Goodguys 23rd Eagle One West Coast Nationals, August 21–23, at the Pleasanton Fairgrounds in California. Goodguys, Pleasanton, CA; 925/838-9876.

SEMA News, April 2009, Fast Facts, Ryan Siedel 

SPAL USA promoted former inside sales representative Ryan Siedel to regional sales assistant for the company’s automotive aftermarket high-performance fan, blower and electronic accessory products. He will assist the sales team in the growth and development of the company’s product line and help support its sales and marketing initiatives. The company also named Tim W. McGee regional sales manager for its commercial fan, blower and electronic product lines. McGee will work to develop and expand the OEM market share for SPAL USA’s premium electric cooling fans and blowers in the southeastern United States. SPAL, Ankeny, IA; 515/289-7000.  

 SEMA News, April 2009, Fast Facts, Tony Reeves

Beck/Arnley hired Tony Reeves as a catalog specialist to assist with all catalog and database responsibilities and help manage the image database and customer files. Reeves previously spent 20 years with Beck/Arnley working in catalog research. The company also hired Chad Horton as IT liaison. He will work with sales and operations, handle requests from management and work on special projects.

SEMA News, April 2009, Fast Facts, Speedy Bill Smith 

“Speedy” Bill Smith, founder and owner of Speedway Motors, was the eighth recipient of the Robert E. Petersen Lifetime Achievement Award. The annual award recognizes significant contributions to the business and hobby of hot rodding and restoration. The award was presented during the grand opening breakfast at the 11th Annual Hotrod & Restoration Trade Show.

SEMA News, April 2009, Fast Facts, Scott Davis 

Scott Davis was hired by Lunati as a new account representative to support the company’s more aggressive direction upon being restored to private ownership. “With the previous ownership, engine builders were unable to deal directly with Lunati,” said Derek Scott, Lunati’s director of operations. “We are actively seeking relationships with qualified engine builders, and we are adding the necessary resources to handle their needs.”  


Mickey Thompson Performance Tires & Wheels will not participate as a major sponsor of the NHRA in 2009. “The tough decision to suspend our relationship with NHRA after more than 26 years is due to several concerns, including a recent mandate by the NHRA that Pro Stock racers will be required to compete exclusively on Goodyear tires,” said Ken Warner, vice president of sales and marketing for Mickey Thompson. Mickey Thompson Performance Tires & Wheels, Corona, CA; 951/817-0101.

Speedway Motors Inc. acquired the street-rod-related assets of Total Performance Inc. All Total Performance operations will be consolidated into the Speedway Motors’ facilities in Lincoln, Nebraska. “Speedy” Bill Smith, founder and president of Speedway Motors, said that a smooth, seamless transition is expected. Terms of the transaction were not disclosed. Speedway Motors Inc., Lincoln, NE; 800/979-0122. Total Performance, Wallingford, CT; 203/265-5667.

The American International Automotive Dealers Association (AIADA)
honored longtime member and past director John H. (Jack) Thompson of Doylestown, Pennsylvania, with the David F. Mungenast Sr. Lifetime Achievement Award. The award is presented annually to an individual whose deep commitment and contributions to the international auto industry and his or her community sets them apart. AIADA, Alexandria, VA; 800/GO-AIADA .

Infineon Raceway Media Relations Department Manager John Cardinale was named the NASCAR Track PR Representative of the Year at the annual NASCAR PR Summit. Voted on by members of the motorsports media, previous winners of the award and NASCAR PR, the NASCAR Track PR Representative of the Year award recognizes the outstanding efforts of a track representative. Infineon, Sonoma, CA; 707/938-8448.

Wed, 04/01/2009 - 14:15

SEMA News -- April 2009
INSIDE SEMA

Will Woods

SEMA Vice President of Councils

Editor's Note: This is the latest in a series of articles highlighting members of SEMA’s executive management team.

SEMA News, April 2009, Inside SEMA, Will WoodsSEMA News: Can you briefly explain your role and the role of your department at SEMA?

Will Woods: I am the team leader for the councils department, which is comprised of four council directors/coordinators and an administrative assistant. Our team facilitates the accomplishment of organizational goals outlined by the council leaders who serve each of their niche market constituents.

SN: Can you briefly touch on some of the benefits and opportunities associated with council membership? Why should someone get involved?

WW: Automotive aftermarket professionals benefit from networking and educational opportunities that are unmatched in the industry. The vast majority of business leaders and trendsetters who frequent our trade shows, educational sessions and meetings are provided invaluable opportunities to gain insight into best practices, new business opportunities and management techniques that can be readily applied in their own firms.

SN: What do you see as the biggest challenges that currently face SEMA-member companies, and what specifically do the councils offer to address those challenges?

WW: I don’t have to tell you that the current economic climate presents enormous challenges for our members. This is a time when an association must “step up” and provide as much support as possible to assist members. Our council members provide valuable input on critical issues in the marketplace, and we are responding with targeted educational and networking opportunities to help member firms survive during this adverse business climate.

SN: Are there any initiatives or programs that you are especially excited about and would like to share with the membership?

WW: The Motorsports Parts Manufacturers Council (MPMC) is supporting Motorsports Awareness and its Take a Friend to a Race program, encouraging industry members and consumers to support local and regional racetracks. The Automotive Restoration Market Organization (ARMO) provides a similar effort with its successful Take a Kid to a Car Show program, encouraging “next-generation” enthusiasm in cars and industry events. The Hot Rod Industry Alliance (HRIA) just completed its annual Education & Training Day at the Hotrod & Restoration Show in Indianapolis, where manufacturers were afforded the opportunity to demonstrate their products and benefits directly to customers and distributors. And, of course, the Street Performance Council (SPC) will hold its popular 3rd annual Internet Symposium in July, providing cutting-edge technology-related educational opportunities for our member firms.

SEMA councils are making every effort to provide timely, cost-effective programs and services to their members. The years 2009 and 2010 may indeed be difficult, but with our help, the automotive aftermarket will survive and emerge from this recession a leaner, meaner racing machine.

Wed, 04/01/2009 - 14:15

SEMA News -- April 2009
INSIDE SEMA

Will Woods

SEMA Vice President of Councils

Editor's Note: This is the latest in a series of articles highlighting members of SEMA’s executive management team.

SEMA News, April 2009, Inside SEMA, Will WoodsSEMA News: Can you briefly explain your role and the role of your department at SEMA?

Will Woods: I am the team leader for the councils department, which is comprised of four council directors/coordinators and an administrative assistant. Our team facilitates the accomplishment of organizational goals outlined by the council leaders who serve each of their niche market constituents.

SN: Can you briefly touch on some of the benefits and opportunities associated with council membership? Why should someone get involved?

WW: Automotive aftermarket professionals benefit from networking and educational opportunities that are unmatched in the industry. The vast majority of business leaders and trendsetters who frequent our trade shows, educational sessions and meetings are provided invaluable opportunities to gain insight into best practices, new business opportunities and management techniques that can be readily applied in their own firms.

SN: What do you see as the biggest challenges that currently face SEMA-member companies, and what specifically do the councils offer to address those challenges?

WW: I don’t have to tell you that the current economic climate presents enormous challenges for our members. This is a time when an association must “step up” and provide as much support as possible to assist members. Our council members provide valuable input on critical issues in the marketplace, and we are responding with targeted educational and networking opportunities to help member firms survive during this adverse business climate.

SN: Are there any initiatives or programs that you are especially excited about and would like to share with the membership?

WW: The Motorsports Parts Manufacturers Council (MPMC) is supporting Motorsports Awareness and its Take a Friend to a Race program, encouraging industry members and consumers to support local and regional racetracks. The Automotive Restoration Market Organization (ARMO) provides a similar effort with its successful Take a Kid to a Car Show program, encouraging “next-generation” enthusiasm in cars and industry events. The Hot Rod Industry Alliance (HRIA) just completed its annual Education & Training Day at the Hotrod & Restoration Show in Indianapolis, where manufacturers were afforded the opportunity to demonstrate their products and benefits directly to customers and distributors. And, of course, the Street Performance Council (SPC) will hold its popular 3rd annual Internet Symposium in July, providing cutting-edge technology-related educational opportunities for our member firms.

SEMA councils are making every effort to provide timely, cost-effective programs and services to their members. The years 2009 and 2010 may indeed be difficult, but with our help, the automotive aftermarket will survive and emerge from this recession a leaner, meaner racing machine.

Wed, 04/01/2009 - 14:15

SEMA News -- April 2009
INSIDE SEMA

Will Woods

SEMA Vice President of Councils

Editor's Note: This is the latest in a series of articles highlighting members of SEMA’s executive management team.

SEMA News, April 2009, Inside SEMA, Will WoodsSEMA News: Can you briefly explain your role and the role of your department at SEMA?

Will Woods: I am the team leader for the councils department, which is comprised of four council directors/coordinators and an administrative assistant. Our team facilitates the accomplishment of organizational goals outlined by the council leaders who serve each of their niche market constituents.

SN: Can you briefly touch on some of the benefits and opportunities associated with council membership? Why should someone get involved?

WW: Automotive aftermarket professionals benefit from networking and educational opportunities that are unmatched in the industry. The vast majority of business leaders and trendsetters who frequent our trade shows, educational sessions and meetings are provided invaluable opportunities to gain insight into best practices, new business opportunities and management techniques that can be readily applied in their own firms.

SN: What do you see as the biggest challenges that currently face SEMA-member companies, and what specifically do the councils offer to address those challenges?

WW: I don’t have to tell you that the current economic climate presents enormous challenges for our members. This is a time when an association must “step up” and provide as much support as possible to assist members. Our council members provide valuable input on critical issues in the marketplace, and we are responding with targeted educational and networking opportunities to help member firms survive during this adverse business climate.

SN: Are there any initiatives or programs that you are especially excited about and would like to share with the membership?

WW: The Motorsports Parts Manufacturers Council (MPMC) is supporting Motorsports Awareness and its Take a Friend to a Race program, encouraging industry members and consumers to support local and regional racetracks. The Automotive Restoration Market Organization (ARMO) provides a similar effort with its successful Take a Kid to a Car Show program, encouraging “next-generation” enthusiasm in cars and industry events. The Hot Rod Industry Alliance (HRIA) just completed its annual Education & Training Day at the Hotrod & Restoration Show in Indianapolis, where manufacturers were afforded the opportunity to demonstrate their products and benefits directly to customers and distributors. And, of course, the Street Performance Council (SPC) will hold its popular 3rd annual Internet Symposium in July, providing cutting-edge technology-related educational opportunities for our member firms.

SEMA councils are making every effort to provide timely, cost-effective programs and services to their members. The years 2009 and 2010 may indeed be difficult, but with our help, the automotive aftermarket will survive and emerge from this recession a leaner, meaner racing machine.