Companies interested in exhibiting at the 2013 SEMA Show are encouraged to secure booth space by using the "Buy A Booth" link available on the homepage of www.SEMAShow.com.

By Jeff Pressman

Attention 2013 SEMA Show exhibitors: This year's Priority Booth Selection process runs between May 2 and May 13. On April 24, each exhibitor's “primary SEMA Show contact” (as listed on the rental agreement) was e-mailed a link to the floorplan along with a one-hour time window, somewhere between May 2 and May 13. This is the time window during which exhibitors will be contacted to choose their booth location.

The e-mail was from Chuck Schwartz using the e-mail address cschwartz@convexx.com, and exhibitors are encouraged to check spam and junk filters to ensure the e-mail reached the inbox. Exhibitors that did not receive an e-mail should contact Show Management at salesmgr@convexx.com or call 702-450-7662 ext. 120.

Companies interested in exhibiting at the 2013 SEMA Show are encouraged to secure booth space by using the "Buy A Booth" link available on the homepage of www.SEMAShow.com.

More information on the 2013 SEMA Show—Tuesday–Friday, November 5–8, Las Vegas—is available online at www.SEMAShow.com. 

With nearly 2,000 manufacturers prepped to choose their spots on the 2013 SEMA Show floor, this year's Priority Booth Selection process will include 6% more exhibitors than in 2012. The SEMA Show continues its reputation as the ideal destination for buyers to source and buy products and capitalize on market trends. In fact, SEMA Show Management recently revealed that 93% of the buyers that attend the SEMA Show report that the Show is worth the time and cost to attend and are pleased with the quality and variety of the exhibitors on display.   

The shooters at KGP Photography caught a Ford F-Series Super Duty prototype sporting some serious, big-barreled smoke stacks. The 'stacks are clearly functional, as the cool, moist air has resulted in lots of smoke billowing out. It's unclear what to make of this one, as its not your traditional factory exhaust treatment. The shooters have seen this prototype making several test runs throughout the Dearborn, Michigan, area, and it has been frequenting Ford's usual test and development labs that are actively developing the Blue Oval's next-generation models. They have seen this 'stacked F-350 leave one lab just minutes after a mule for the next-generation F-150, so the fact that this prototype is registered on manufacturer "M" license plates, like every other prototype and test car running the streets of Dearborn, shows that it is part of some Ford testing program, whatever that may be.

Is Ford developing a smoke stack exhaust for production trucks? Who knows, but its an interesting curiosity to see as part of the Detroit test scene.

Photo Credit: KGP Photography

The shooters at KGP Photography caught a Ford F-Series Super Duty prototype sporting some serious, big-barreled smoke stacks. The 'stacks are clearly functional, as the cool, moist air has resulted in lots of smoke billowing out. It's unclear what to make of this one, as its not your traditional factory exhaust treatment. The shooters have seen this prototype making several test runs throughout the Dearborn, Michigan, area, and it has been frequenting Ford's usual test and development labs that are actively developing the Blue Oval's next-generation models. They have seen this 'stacked F-350 leave one lab just minutes after a mule for the next-generation F-150, so the fact that this prototype is registered on manufacturer "M" license plates, like every other prototype and test car running the streets of Dearborn, shows that it is part of some Ford testing program, whatever that may be.

Is Ford developing a smoke stack exhaust for production trucks? Who knows, but its an interesting curiosity to see as part of the Detroit test scene.

Photo Credit: KGP Photography

The shooters at KGP Photography caught a Ford F-Series Super Duty prototype sporting some serious, big-barreled smoke stacks. The 'stacks are clearly functional, as the cool, moist air has resulted in lots of smoke billowing out. It's unclear what to make of this one, as its not your traditional factory exhaust treatment. The shooters have seen this prototype making several test runs throughout the Dearborn, Michigan, area, and it has been frequenting Ford's usual test and development labs that are actively developing the Blue Oval's next-generation models. They have seen this 'stacked F-350 leave one lab just minutes after a mule for the next-generation F-150, so the fact that this prototype is registered on manufacturer "M" license plates, like every other prototype and test car running the streets of Dearborn, shows that it is part of some Ford testing program, whatever that may be.

Is Ford developing a smoke stack exhaust for production trucks? Who knows, but its an interesting curiosity to see as part of the Detroit test scene.

Photo Credit: KGP Photography

The Silverado is available for SEMA Show project vehicle proposals.

This year’s Chevrolet SEMA Project Vehicle Program will focus on designers and manufacturers dedicated to creating new accessories and vehicle personalization items for Chevrolet's ’14 vehicles. Proposals are due April 30.

Vehicles available include:

• Silverado (light-duty crew cab only)
• Sonic
• Impala
• Camaro

Requirements:

• Preservation of brand emblem on front and rear of vehicle
• High level of paint and build quality; no wraps
• Sponsorship decals to be limited to the lower 1/3 of the vehicle side
• Commit to periodic design and build check-ins
• Promote vehicle through November 4, 2014
• Retain vehicle insurance totaling at least $3 million until the completion of the contract
• Submit proposal by April 30, 2013

Proposals must include:

• An introductory letter defining the vehicle theme, content and SEMA Show display location
• An exterior rendering with the intended colors and modifications accurately defined
• A build timeline with start and completion dates
• A detailed list of upgrades and modifications
• A promotional plan
• Three printed copies mailed to the address listed below

Builders are urged to contact Tom Gardner at thomas.gardner@gm.com before submitting a formal proposal to discuss the vehicle theme and modifications.

Send proposals, by April 30, to:

Tom Gardner
Mail Code: 480-717-004
GM Technical Center – AEC Building
30003 Van Dyke Ave.
Office 168-04
Warren, MI 48090-9060

The Silverado is available for SEMA Show project vehicle proposals.

This year’s Chevrolet SEMA Project Vehicle Program will focus on designers and manufacturers dedicated to creating new accessories and vehicle personalization items for Chevrolet's ’14 vehicles. Proposals are due April 30.

Vehicles available include:

• Silverado (light-duty crew cab only)
• Sonic
• Impala
• Camaro

Requirements:

• Preservation of brand emblem on front and rear of vehicle
• High level of paint and build quality; no wraps
• Sponsorship decals to be limited to the lower 1/3 of the vehicle side
• Commit to periodic design and build check-ins
• Promote vehicle through November 4, 2014
• Retain vehicle insurance totaling at least $3 million until the completion of the contract
• Submit proposal by April 30, 2013

Proposals must include:

• An introductory letter defining the vehicle theme, content and SEMA Show display location
• An exterior rendering with the intended colors and modifications accurately defined
• A build timeline with start and completion dates
• A detailed list of upgrades and modifications
• A promotional plan
• Three printed copies mailed to the address listed below

Builders are urged to contact Tom Gardner at thomas.gardner@gm.com before submitting a formal proposal to discuss the vehicle theme and modifications.

Send proposals, by April 30, to:

Tom Gardner
Mail Code: 480-717-004
GM Technical Center – AEC Building
30003 Van Dyke Ave.
Office 168-04
Warren, MI 48090-9060

The Silverado is available for SEMA Show project vehicle proposals.

This year’s Chevrolet SEMA Project Vehicle Program will focus on designers and manufacturers dedicated to creating new accessories and vehicle personalization items for Chevrolet's ’14 vehicles. Proposals are due April 30.

Vehicles available include:

• Silverado (light-duty crew cab only)
• Sonic
• Impala
• Camaro

Requirements:

• Preservation of brand emblem on front and rear of vehicle
• High level of paint and build quality; no wraps
• Sponsorship decals to be limited to the lower 1/3 of the vehicle side
• Commit to periodic design and build check-ins
• Promote vehicle through November 4, 2014
• Retain vehicle insurance totaling at least $3 million until the completion of the contract
• Submit proposal by April 30, 2013

Proposals must include:

• An introductory letter defining the vehicle theme, content and SEMA Show display location
• An exterior rendering with the intended colors and modifications accurately defined
• A build timeline with start and completion dates
• A detailed list of upgrades and modifications
• A promotional plan
• Three printed copies mailed to the address listed below

Builders are urged to contact Tom Gardner at thomas.gardner@gm.com before submitting a formal proposal to discuss the vehicle theme and modifications.

Send proposals, by April 30, to:

Tom Gardner
Mail Code: 480-717-004
GM Technical Center – AEC Building
30003 Van Dyke Ave.
Office 168-04
Warren, MI 48090-9060

By SEMA Editors

Through a partnership with UPS, SEMA members can benefit from a savings of 10% on business services, including mailboxes, copy and print services, faxing, packaging services, laminating and binding, retail shipping supplies and business supplies.

SEMA and UPS have teamed up to offer special pricing and discounts to fuel business performance for SEMA members throughout the year.

With support from your local The UPS Store, SEMA members can benefit from a savings of 10% and take advantage of the convenience of one-stop shopping. Members can save on business services, including mailboxes, copy and print services, faxing, packaging services, laminating and binding, retail shipping supplies and business supplies. There are more than 4,700 locations in the United States, Puerto Rico and Canada.

To take advantage of all that UPS offers to SEMA members, visit www.SEMA.org/UPS, log-in with your SEMA-member credentials and then click the “Sign Up and Save Today” button to access the UPS program enrollment website. Members will need to download a virtual card from the UPS program enrollment page. SEMA members will need to take this document to The UPS Store location and tell the center associate you are part of SEMA's corporate account program.

Get started today and begin taking advantage of these discounts.

	The Product and Catalog Showcase remains one of the most cost-effective ways to advertise in SEMA News, helping members reach more customers specific to the specialty-equipment market.

By SEMA Editors

Generate buzz for your products and services by participating in the 2013 SEMA News Product and Catalog Showcase featured in the June issue of SEMA News.

The Product and Catalog Showcase remains one of the most cost-effective ways to advertise in SEMA News, helping members reach more customers specific to the specialty-equipment market. Only offered twice per year in the June and November issues of SEMA News, guarantee yourself a spot in this highlighted showcase and boost your branding efforts!

Simply provide a four-color image of your new product or your catalog cover, along with about 75 words of text, and we'll build a 1/6-page ad for you. The cost is $250. Space is limited, so don't delay.

To get started, contact Brian Paik at 909-978-6677 or Monica Terlouw at 909-978-6695.

View the online version of the 2012 SEMA News Product & Catalog Showcase, featured in the November 2012 issue of SEMA News.

	The Product and Catalog Showcase remains one of the most cost-effective ways to advertise in SEMA News, helping members reach more customers specific to the specialty-equipment market.

By SEMA Editors

Generate buzz for your products and services by participating in the 2013 SEMA News Product and Catalog Showcase featured in the June issue of SEMA News.

The Product and Catalog Showcase remains one of the most cost-effective ways to advertise in SEMA News, helping members reach more customers specific to the specialty-equipment market. Only offered twice per year in the June and November issues of SEMA News, guarantee yourself a spot in this highlighted showcase and boost your branding efforts!

Simply provide a four-color image of your new product or your catalog cover, along with about 75 words of text, and we'll build a 1/6-page ad for you. The cost is $250. Space is limited, so don't delay.

To get started, contact Brian Paik at 909-978-6677 or Monica Terlouw at 909-978-6695.

View the online version of the 2012 SEMA News Product & Catalog Showcase, featured in the November 2012 issue of SEMA News.