SEMA eNews highlights new products from industry companies when available. To have your product considered for upcoming issues, send product press releases to email@example.com.
ICE Emissions Reduction System
Vaness LLC has announced the introduction of its ICE Emissions Reduction system to be produced and sold through the company’s Velvet Comfort Heating division.
“This product will warm the cold exhaust coming from the manifold exhaust and heat it before it reaches the catalytic converter. This will greatly reduce pollutants from being released into the atmosphere,” said Kit Whipple, Velvet Comfort Heating vice president of marketing.
Vaness’ patent-pending heating system uses heating devices which warm to more than 600° F in less than seven seconds. Two units were used in testing the effectiveness of the system. According to Whipple, the high-powered, low-cost system has powerful economic and environmental potential.
Lightweight Billet Reservoirs for Remote- or Direct-Mount Master Cylinders
Finned aluminum brake fluid reservoirs from Wilwood give your firewall a unique high-performance look. Machining ribs in the billet reduces weight (now 4.6 oz.–3 oz. less than Wilwood’s standard billet reservoir) and increases surface area for passive cooling.
These durable reservoirs hold 4 oz. of fluid and can be mounted directly to Wilwood’s single or tandem remote master cylinders, or plumbed remotely with braided stainless flex lines (sold separately).
Choose from media burnished aluminum with matching cap or hard anodized gray with black nylon cap. Matching billet mounting brackets are also available.
LT1/LT4 and EcoTec3 Harnesses
Howell EFI announced that it now offers plug and play LT1/LT4 and EcoTec3 wiring harnesses for classic musclecars, Corvettes and trucks. The company also offers multiple options to transplant power for both automatic and manual transmissions and even supercharged classics.
The LT1/LT4, and EcoTec3 wiring harnesses are customized to the customer’s specifications and include fuse block, check engine light, GM diagnostic connector, and electric fan control in a complete street rod type, stand-alone design to control engine functions. There is only one ground for the entire system and only three points of power to hook up the harness—battery, ignition and fuel pump. They are available with or without wiring for electronic transmission and all emission connectors are included to ensure this harness is street legal in all 50 states as a replacement harness.
GoPure GP5212 Automotive Air Purifier
Lumileds has just introduced the new Philips GoPure GP5212, a powerful, compact, and innovative car air purifier that can quickly remove up to 100 different types of pollutants and neutralize unpleasant odors in any vehicle. GoPure GP5212 uses a special three-layer filter technology to quickly deliver clean, fresh air in minutes and its extremely compact and portable design makes it easy to use anywhere in the vehicle.
The Philips SelectFilter Plus technology quickly and effectively filters out small particles, viruses, bacteria, pollen and toxic gases. The first stage is a pre-filter designed to capture large particles such as pet hair, dust, and airborne dirt. The second layer features a High Efficiency Sorbent Agent (HESA) filter that scrubs out toxic gases and harmful chemicals and uses a powerful absorption and oxidation process to remove smoke, odors and gases.
The final layer employs a High Efficiency Particulate Air (HEPA) filter that removes more than 99% of airborne bacteria and viruses. It also captures ultra-fine particles, as small as 0.015 microns, that can get deep into the lungs and cause health issues.
The Philips GoPure GP5212 is designed to operate automatically, so the driver can focus on operating the vehicle. When plugged into the vehicle’s auxiliary power outlet, the unit turns on and off with the vehicle’s ignition. GoPure GP5212 two-speed fan can be easily adjusted by the power button. An indicator light signals the need for a filter replacement.
Wind Stopper Plus & Tonneau Cover
MasterTop has announced its latest product available for the ’18–’22 Jeep Wrangler Unlimited JL four-door—the Wind Stopper Plus & Tonneau Cover two-piece kit.
The new Wind Stopper Plus & Tonneau Cover two-piece kit is designed to provide protection from the elements for both the front and rear portions of a Jeep Wrangler Unlimited. This MasterTop kit uses innovative MasterTwill to provide superior weather and noise protection while giving that true fabric soft-top look.
The Wind Stopper Plus features a unique, easy-to-install wrap-around design that seals around the door surrounds. The two-piece kit is also constructed from durable three-layer MasterTwill fabric and each Wind Stopper Plus has an exclusive zip-down rear window to allow air to flow through the cab on warm days.
All-In-One Kit Rust and Corrosion Prevention
The All-In-One Kit by KBS Coatings is a DIY, user-friendly all-Inclusive kit uses KBS Coatings’ three-step system that consists of KBS Klean to clean surfaces, RustBlast to remove surface rust, and RustSeal to seal metal against moisture. KBS Top Coater provides a beautiful, durable, UV stable and permanent final finish, which withstands dulling and fading caused by prolonged sunlight exposure.
RustSeal, a rust inhibitive and preventative paint, chemically bonds to metal including rusted metal or any substrate. KBS Coatings Advanced Cross-Linked Technology provides a flexible yet rock-hard and non-porous barrier that won't crack, chip or peel.
RustSeal works by isolating metal from moisture. Without moisture present, steel can't rust. RustSeal is incredibly tough and extremely resistant to abrasion and impact. KBS Top Coater provides a final finish. This very-high solids paint does not run or sag and gives at least twice the coverage of conventional paints. Top Coater is available in 16 colors, including the popular KBS Camo Colors camouflage colors pallet.
ATE Disc Brake Pad Cover 95% of European Vehicles
Continental has expanded its ATE Disc Brake Pad line to cover more than 95% of European vehicles. The expansion brings the current line count to 293 part numbers that can deliver applications for servicing more than 104 million vehicles on the road in the United States and Canada. Key applications for both semi-metallic and ceramic formulations include popular models from Alfa Romeo, Audi, BMW, Jaguar, Land Rover, Mercedes-Benz, MINI, Porsche, Range Rover, Renault, Saab, smart, Volkswagen and Volvo.
ATE Disc Brake Pads are formulated to strict OE friction specifications and built and tested to meet or exceed OE manufacturers’ quality standards. ATE engineers utilize more than 150 different friction formulations to ensure that the pads deliver the ideal braking solution for specific vehicle applications and provide full braking power instantly without fade, squeal or judder.
Skid Plate With Integrated LED Emitters for Jeep Wrangler
Oracle Lighting is proud to announce the launch of the new Skid Plate with Integrated LED Emitters for the ’18–’21 Jeep Wrangler JL and the ’21–’22 Gladiator JT (PN: 5883-001/006). The company will debut the new product during the 2021 SEMA Show, November 2–5, Las Vegas Convention Center, booth #20547.
The LED Lighting modules feature precision optics for a 30-degree beam width and an option of white or yellow LED light. These LED emitters can be easily replaced individually if there is ever damage to one of the modules.
Additional product specifications and features include:
- 9x High-Output 15W LED Emitters
- Total Wattage: 135W
- Total Lumens: 9000Lm
- Total Power Draw: 6A @12V DC
- Advanced LED Optic Design
- Modules DOT, SAE and E9 Marked
- IP Rating: IP68 Ingress Protection
- One-Year Warranty
- Skid Plate Lighting System
- Switched Relay Wiring Harness
- Mounting Hardware
Valve Spring Kit For Toyota
With enthusiasts seeking to amp up the power in their Toyota Tundra pickups, Manley Performance has responded with a special valve spring kit for the DOHC 5.7L 3UR-FE V8 engine. This engine is also employed in Toyota Sequoia, Land Cruiser and Lexus LX 570 applications.
Manley’s new kit (PN: 26205) features a set of 32 valve springs that are wound from an exceptionally pure steel alloy and engineered for use in conjunction with aftermarket camshafts that have lifts to .480 in. The springs have a .990-in. OD and can be used with the factory spring seat. They’re rated at 75 lbs., installed and 205 lbs., open (.970 in.).
Also included in the kit are lightweight titanium retainers. This allows the engine to achieve up to 10,000 RPM. The retainers are manufactured from heat-treated aerospace grade titanium and CNC machined to exacting tolerances. They are designed for use with 5.5mm stem valves and weigh only 7 grams apiece.