- Dec 18 2014
- Dec 18 2014
Superlift Suspension Systems Instructional Video: 2007 & Newer Jeep Wrangler (JK) Lift Systems
|View Video||Video Description|
|Title: Superlift Suspension Systems Instructional Video: 2007 & Newer Jeep Wrangler (JK) Lift Systems Duration:
Duration: 15 minutes
Superlift front / rear coils provide the lift. The largest jump in spring rate is from the 2 to 4-door model so Superlift offers a heavier rated rear spring for the 4-door. Lift height can vary slightly (plus / minus up to 3/8") depending on your factory spring rate. As the JK is raised, track bar angle increases and when lift height exceeds 2" bar length becomes an issue. Front correction is accomplished via a new adjustable track bar. This route is preferred, as opposed to using a relocation bracket, since the bar’s arc of travel must remain in sync with the drag link’s arc of travel or steering wheel “kick” will result.
A relocation bracket is used at the rear axle since there are no steering geometry issues. The stock JK has no provisions for front caster angle realignment, which is required at this lift height, so Superlift provides new alignment cams. Compression travel is controlled via new Urethane stops while new shocks (3 different levels of performance and price offered) improve control and restore full extension travel. The lift system also includes longer sway bar links with factory style, tie-rod type upper ends, front / rear brake hose relocation brackets and emergency brake cable brackets… nothing is left unattended.
|QUESTIONS? Contact SEMA Customer Service, 909-610-2030 (8:00 am to 5:00 pm Pacific) or email us.|