SEMA

Syndicate content

Council Networking Mixer

Date: 
Jan 23 2014 7:00pm - 10:00pm
Timezone: 
PDT
Facility: 
Embassy Suites Santa Ana – Orange County Airport North
City: 
Santa Ana
State: 
California
Those traveling to the MPMC Media Trade Conference* or working in the greater Los Angeles/Orange County area are invited to a networking mixer on Thursday, January 23 from 7:00-10:00 p.m. SEMA's Young Executive Network (YEN), the SEMA Businesswomen's Network (SBN), and the Motorsports Parts Manufacturers Council will host the event in the lounge of the Embassy Suites Santa Ana - Orange County Airport North.
Those traveling to the MPMC Media Trade Conference* or working in the greater Los Angeles/Orange County area are invited to a networking mixer on Thursday, January 23 from 7:00-10:00 p.m.

Emerging Trends Tour and Industry Discussion

Date: 
Jan 20 2014 9:00am - 1:00pm
Timezone: 
PDT
Facility: 
SEMA Garage
City: 
Diamond Bar
State: 
California
SEMA’s Emerging Trends & Technology Network (ETTN) will kick off the New Year with an event at the SEMA Garage in Diamond Bar, California on Monday, January 20, from 9:00 a.m.–1:00 p.m.
sema garage

SEMA’s Emerging Trends & Technology Network (ETTN) will kick off the New Year with an event at the SEMA Garage in Diamond Bar, California on Monday, January 20, from 9:00 a.m.–1:00 p.m.

The event will include networking over breakfast and lunch and a discussion focused on emerging trends that impact the specialty-equipment market.

MPMC General Membership Meeting

Date: 
Jan 20 2014 2:00pm - 4:30pm
Timezone: 
PDT
Facility: 
Embassy Suites Orange County Airport North, La Jolla Room
City: 
Santa Ana
State: 
California
Join the Motorsports Parts Manufacturers Council (MPMC) for a general membership meeting on Monday, January 20, 2014 in Santa Ana, California.
Join the Motorsports Parts Manufacturers Council (MPMC) for a general membership meeting on Monday, January 20, 2014 in Santa Ana, California. One hundred MPMC members will already be on site for the Media Trade Conference, giving members the perfect opportunity to spend a couple of hours discussing the future of the council and brainstorming during an interactive goal-setting session.

WTC General Membership Meeting and Industry Discussion

Date: 
Feb 5 2014 8:00am - 5:00pm
Timezone: 
PDT
Facility: 
SEMA Garage
City: 
Diamond Bar
State: 
California
The Wheel & Tire Council will host its annual open meeting and industry discussion at the SEMA Garage Industry Innovations Center in Diamond Bar, California on the morning of Wednesday, February 5, 2014. This annual meeting for all WTC member-company employees is an opportunity to work with other council members to determine the focus and direction of the council for the next year and beyond.
The Wheel & Tire Council will host its annual open meeting and industry discussion at the SEMA Garage Industry Innovations Center in Diamond Bar, California on the morning of Wednesday, February 5, 2014. This annual meeting for all WTC member-company employees is an opportunity to work with other council members to determine the focus and direction of the council for the next year and beyond. 

Measuring Session: Re-designed 2014 Highlander

Date: 
Jan 22 2014 9:00am - 3:00pm
Timezone: 
PDT
Facility: 
Toyota Warehouse
City: 
Gardena
State: 
California
1.6L 4-cyl. 130hp DOHC/2.0L 4-cyl 164hp GDI; FWD, 6MT and 6AT

All SEMA Manufacturer Members

SEMA Town Hall Meetings: Sacramento, California

Date: 
Jan 29 2014 6:00pm - 9:00pm
Timezone: 
PDT
Facility: 
Flowmaster, B&M & Hurst Warehouse
City: 
Sacramento
State: 
California
The SEMA Town Hall Meeting and Reception Tour is coming to Sacramento, CA. Join us for an opportunity to network with the Board of Directors, local industry leaders, members and SEMA Staff. This is your chance to share the challenges and opportunities that your business is facing with your peers. California State Senator Ted Gaines will be joining us to kick off the event.
 
The SEMA Town Hall Meeting in Sacramento, California was a successful way to kick off the first of the SEMA Town Hall series for 2014. Eighty members/non-members attended this event and had the opportunity to network with industry leaders and discuss the industry during an open forum.

Measuring Session: 2014 Kia Soul All-New

Date: 
Jan 8 2014 9:00am - 4:00pm
Timezone: 
PDT
Facility: 
Kia Motors of America
City: 
Irvine
State: 
California
1.6L 4-cyl. 130hp DOHC/2.0L 4-cyl 164hp GDI; FWD, 6MT and 6AT

All SEMA Manufacturer Members

Webinar: Twenty Ideas in Twenty Minutes - Driving Business Growth & Fueling High Performance

Date: 
Jan 9 2014 10:00am - 10:30am
Timezone: 
PST
Facility: 
Online
Getting customers is one thing. Between the challenges of escalating competition and "service savvy" customers, if you don’t excel in sales and every single aspect of the customer's experience, they will take their buying power elsewhere. It’s that simple.

Twenty Ideas in Twenty Minutes - Driving Business Growth & Fueling High Performance: How to Create a Sales-Service Excellence Culture
Presented by: Christine Corelli 

Getting customers is one thing. Between the challenges of escalating competition and "service savvy" customers, if you don’t excel in sales and every single aspect of the customer's experience, they will take their buying power elsewhere. It’s that simple.

Measuring Session: 2014 Silverado

Date: 
Jan 17 2014 8:00am - 4:00pm
Timezone: 
PDT
Facility: 
SEMA Garage and Innovations Center
City: 
Diamond Bar
State: 
California
2014 Silverado Z71 4WD double-cab

All SEMA Manufacturer Members

  • 2014 Silverado 
  • Cameras are allowed.
  • Blackout Dates:

            Tuesday, 12/24/13
            Wednesday, 12/25/13
            Tuesday, 12/31/13
            Wednesday, 1/1/14

Measuring Session: All-new 2014 Ford Fiesta ST

Date: 
Dec 3 2013 9:00am - Dec 13 2013 4:00pm
Timezone: 
PDT
Facility: 
SEMA Garage
City: 
Diamond Bar
State: 
California
4-dr, hatchback. 1.6 L 16 Valve Turbocharged direct injection EcoBoost

All SEMA Manufacturer Members

  • 4-dr, hatchback
  • 1.6 L 16 Valve Turbocharged direct injection EcoBoost

Cameras will be allowed. Full measuring and some fitment of products will be allowed.

Questions: Mike Spagnola, mikes@sema.org or 909-978 6707.

Register for this Measuring Session

Add to calendar